Launch Control On EDC16 ECU PDF [PDF]

Zitiervorschau

Launch Control on EDC16 ECU’s This is a little guide on enabling Launch Control on EDC16 ECU’s NOT fitted to DSG gearboxes. First find this map that I have highlighted already:

This is normally a flat map without the spikes. When LC is activated, it will look like the map above. Axis data are in front of the map (Looking from left to right). Select and open it, and it should look like this:

With Vehicle Speed on the X-axis (Factor 0.01) and Engine Speed on the Y axis (Factor 1). The Z values are allowed Torque (Factor 0.1).

Now modify the map as you wish. In my case I have set LC @2800 RPM. That involves changing the Y axis as well. Looks like this then:

Save, and write file back. Now enjoy the Launch Control!!

Made By: NPS_DieselBoost https://cartechnology.co.uk/member.php?action=profile&uid=153460