38 0 3MB
HOW TO INSTALL ASPEN HYSYS V9 ?
ENG . MOHAMED SELIM TANTA HIGHER INSTITUTE OF ENGINEERING AND TECHNOLOGY
1- First you must have NET framework 3.5 on your windows , so go to control panel /programs/program and features / turn windows feature on or off
Right click on the start menu ,and than control panel
Select both , than check OK , and download if require
2-
Install the hysys V9 1-2 first extract the files that you download it by , selection all /right click on it / extract here
2-2 go to the extracted file and check the install_Sentinel.RMS.8.5.1.Server folder / select the setup by right click / run as administrator / and install this file
3-2 after that go to install folder and check setup by double click on it
4-2 after than follow the photo steps
3
Select I accept
Select the programs that you need but don’t select web or products server
Select the license file from license folder that you had extracted it before .and check next / (don’t select the license file from MAGNiTUDE that will made you face a problem after that)
After your computer restart. try to open the hysys
Than you need the license file from MAGNiTUDE 1- Go to magnitude folder and check ASPEN_LicGen by right click and run as administrator
2-copy the license files to C:\Program Files (x86)\Common Files\AspenTech Shared
Make sure the license file have the same time and date in your computer
3-go to C:\Program Files (x86)\Common Files\AspenTech Shared\aspenONE Licensing Tool ……… and choose AspenOneLicensingTool
1
Choose the last generated license file. and check open
Checked install license and next (check close after install license is done)
3- Go to C:\Program Files (x86)\Common Files\Hyprotech ……. And create a new folder nemed it shared after than copy the license files to it
NOW YOU CAN OPEN THE HYSYS AND USE IT
EGN. mohamed selim