How To Install Antenna of NHR-1500 [PDF]

Zitiervorschau

NHR-1500 antenna installation

8m whip antenna

2

16mm copper cable 2 m

Tuner

2 m copper cable should not be tightened. When the ship is windy, it will form a tension on the copper cable, which may break the output terminal of the turner.

Turner output copper cable should not be tightened

Ground

RF and power cable

2 m copper cable should not be tightened. When the ship is windy, it will form a tension on the copper cable, which may break the output terminal of the turner.

Grounding pile

Grounding is very important, which directly affects the launching effect. It is better to place the grounding terminal on the metal

base and weld the base to the hull in a large area. In theory, it is necessary to connect the ground to a large area of metal in order to achieve good transmitting effect.

Standard installation diagram. An insulator is needed at the output end of the antenna to hold the copper cable。

Copper cable mounted on antenna element

Insulation between copper cable and ground