2017 Drillbits [PDF]

Zitiervorschau

2017 DRILL BIT CLASSIFIER

SPECIAL SUPPLEMENT TO

PUBLISHED IN JANUARY 2017

World Oil’s

2017 DRILL BIT CLASSIFIER World Oil offers this comprehensive listing of major manufacturers’ drilling bits to aid drilling supervisors and engineers in field selection. While this listing has been published annually for many years, changes from year to year are significant. Prior to ordering, users should consult the manufacturer to verify availability and specifications.

How to use the tables. The following tables are divided into six forma-

tion categories. Within these categories are listed most available drilling/ coring bits by type and manufacturer. To use the listings, identify the formation to be drilled, decide which bit type is appropriate, i.e., roller cone, fixed cutter, steel tooth, insert, diamond, etc., and then choose the manufacturer. Companies were asked to list bit data by: 1) IADC code; 2) readily available sizes (special sizes are often available on request); 3) recommended WOB in lb/in. diameter; and 4) codes for special features and usage, a combination of IADC and World Oil special codes (see Nomenclature).

IADC codes. The Drill Bit Classifier uses the International Association of Drilling Contractors’ (IADC’s) classification system for roller cone and fixed cutter bits. The standards for these classifications are two technical papers that appear in the IADC Drilling Manual, 11th Edition, Chapter A, Sections 2 and 3. The two papers are “The IADC roller bit classification system,” adapted from IADC/SPE Paper 23937, presented Feb. 18–21, 1992, and “Development of a new IADC fixed cutter drill bit classification system,” Paper IADC/SPE 23940, presented Feb. 18–21, 1992. All manufacturers were asked to submit data based on these classification systems. Formation categories. The tables show six formation categories corresponding to the IADC formation types, as described below. Companies were asked to list any discrete bit in only one formation type, leaving the user to decide about application in harder, or softer, rock. Nevertheless, duplication of bits in multiple formations remains. The formations are: • Soft and soft sticky. Low compressive strength and high drillability, such as clay, marl, gumbo, unconsolidated sand. • Soft-Medium. Low compressive strength, inter-bedded with hard layers, such as sand, shale, anhydrite. • Medium Moderate compressive strength, such as shale, chalk, anhydrite, sand. • Medium-Hard. Dense with increasing compressive strength but non- or semi-abrasive, e.g., shale, siltstone, sand, lime, anhydrite. • Hard. Hard and dense with high compressive strength and some abrasive layers, such as sand, siltstone. • Extremely hard. Very hard and abrasive, like quartzite and volcanics.

Nomenclature. World Oil shows special features as codes, which include 16 designed by IADC and defined in the above classification papers, plus 11 featured exclusively by World Oil for added descriptions. The codes are: A B C D E G H J

Air drilling application Special bearing seal Center jet Deviation control Extended jet (full length) Gauge/body protection (additional) Horizontal steering application Jet deflection

L M S T W X Y Z

D-2 JANUARY 2017 / WorldOil.com

Lug pads Motor application Standard steel tooth model Two-cone bit Enhanced cutting structure Predominantly chisel tooth insert Conical tooth insert Other shaped insert

IADC F Face discharge ports I Thermally stable synthetic diamond (TSP) K Cross-flow hydraulics N Turbine drilling O Milling applications P Percussion drilling

Q R Rst U V

Lateral nozzles Radial flow hydraulics Rotary steerable Cutter density: light (l), medium (m), heavy (h), e.g., Ul, Um, Uh Anti-whirl characteristics.

World Oil Companies included. Company names, central mailing addresses and company websites are shown below. Atlas Copco 2100 N 1st Street, Garland, Texas, 75040 www.atlascopco.com Baker Hughes 9110 Grogans Mill Road, The Woodlands, Texas 77380 www.bakerhughes.com Bit-Tech SPH, Inc. P.O. Box 1298, Waskom, Texas 75692 www.bit-tech.com Drill Master, Inc. 26797 Hanna Road #9, Oak Ridge North, Texas 77385 www.officialdrillmaster.com Halliburton P.O. Box 60490, Houston, Texas 77205 www.halliburton.com Kingdream Public No. 5, Huagongyuan No.1 Road, Miaoshan Division, Limited Company East Lake New & Hi-Tech. Devel. Zone Wuhan, Hubei Province 430223, PRC China www.kingdream.com NOV Downhole / 7909 Parkwood Circle Drive, Houston, Texas 77036 ReedHycalog Bits www.nov.com/downhole PDC Logic 2601 Venture Drive, Norman, Oklahoma 73069 www.pdclogic.com Rubicon Oilfield International

14902 Sommermeyer, Suite 100, Houston, TX 77041

Smith Bits, P.O. Box 60068, Houston, Texas 77205 a Schlumberger Company www.smith.com TIX-TSK Corporation 4-11-1, Shiba, Minato-ku, Tokyo 108-0014, Japan www.tix.co.jp Ulterra Drilling Technologies L.P.

420 Throckmorton, Fort Worth, Texas 76102 www.ulterra.com

Varel Oil & Gas Drill Bits 1625 West Crosby Road, Suite 124, Carrollton, Texas 75006 www.varelintl.com Note: Some companies list the recommended rotary speed range backwards. This is to imply that as the weight on bit increases, the recommended rotary speed generally decreases, and vice versa.

Copyright © 2017 Gulf Publishing Company. All rights reserved. For additional copies, contact Gulf Publishing Company. Phone: +1 (713) 529-4301. Fax: +1 (713) 520-4433 Mailing address: Gulf Publishing Company, World Oil, Attention: Reprints Department P.O. Box 2608, Houston, TX 77252 USA.

About the cover: A Schlumberger field engineer prepares a PDC bit for a run in a North America land application. (Image courtesy of Schlumberger).

Steel tooth roller cone bits

Baker Hughes R1 111 RC111 111 GTX–1

114

GTX–G1

115

GX–1V MX–1 MXL–1 MXL–1V RC115 VG–1 VM–1

115 115 115 115 115 115 115

GT–1

117

GT–G1 GX–1V MX–1

117 117 117

MXL–1 MXL–1V MXL–1X RC117

117 117 117 117

STX–1

117

VG–1

117

VG–1DO VM–0 VM–1

117 117 117

VMD–1 117 Halliburton A1SA 111 QHN1 111 XN1 111 XN1G 111 XN1GC 111 XNK1 111 A1GRC 115 A1GSC 115 EBXT1DR 115 EBXT1DS 115 EBXT1DSC 115 EBXT1GR 115 EBXT1GRC 115 EBXT1GRC 115 EBXT1GS 115 EBXT1GSC 115 EBXT1G- 115 SCL EBXT1G- 115 SLC EBXTC1GR 115 XT1 115 XT1A1GRC 115 XT1C 115 XT1DR 115 XT1DS 115 XT1G 115 XT1GR 115 XT1GS 115 XT1GSC 115 XT1GSCL 115 XT1GSLC 115 XT1GSR 115 XT1R 115 XT1S 115 XT1SC 115 XTA1GRC 115 XTC1GSL 115 XTC1R 115 XTC1SR 115 XTK1 115 XTK1GS 115 XTK1S 115

16, 24, 28 121/4, 131/2, 143/4, 171/2, 191∕7, 20, 22, 23, 26, 28, 30 121/4, 131/2, 133/4, 137∕8, 143/4, 16, 171/2 121/4, 14, 143/4, 151/2, 16, 161/2, 17, 17 1/8, 171/2, 181∕8, 181/2, 191/4, 20, 21, 22, 23, 24, 26, 27, 28, 30 141/2 143/4, 16, 17 17 141/2 121/4, 16, 171/2, 26 171/2, 22, 23, 24, 26 16, 161/2, 17, 171/2, 181∕8 71/2, 77∕8, 81/2, 85∕8, 83/4, 97∕8, 103∕8, 105∕8, 11, 121/4 81/2 5, 115∕8 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 81/2, 83/4, 91/2, 97∕8, 105∕8, 131/2 9, 115∕8, 12 83∕8, 115∕8 14 81/2, 115∕8, 121/4, 131/2 37∕8, 41∕8, 41/4, 41/2, 45∕8, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4 61/2, 63/4, 97∕8, 121/4, 131/2 43∕8, 41/2, 45∕8 121/4 77∕8, 81/2, 83/4, 87∕8, 97∕8, 101/4, 105∕8, 103/4, 121/4, 131/2, 143∕8 83/4, 121/4 81/2 121/4–131/2 121/4–23 16–26 16–24 26 143/4–26 171/2 143/4–26 171/2 171/2 143/4–26 26 24 16–20 171/2 171/2

1,400–3,900 135–30 1,400–3,900 135–30

CS CS

1,600–3,900 135–70

CS

1,400–3,900 135–30

CGS

1,600–3,900 1,400–3,500 1,400–3,500 1,400–3,500 1,400–3,900 1,400–3,900 1,700–3,500

CSW BCMS BCMS BCMS CS BCGSW BCGMSW

135–70 350–80 350–80 350–80 135–30 135–30 350–80

1,900–5,100 215–80

S

1,900–5,100 215–80 1,900–5,100 215–80 2,100–5,000 350–80

S SW BMS

2,100–5,000 2,100–5,000 1,400–3,500 1,900–5,100

BMS MBSW BMS CS

350–80 350–80 350–80 215–80

1,300–3,300 300–80

MS

1,900–5,100 215–80

BCGSW

1,300–3,300 300–80 1,400–3,500 350–80 2,100–5,000 350–80

BCGSW BCGMSW BCGMSW

2,100–5,000 350–80

BCGMSW

1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000

GMXW GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300

171/2

1,000–5,000 80–300

GMXWC

141/2 171/2–28 22 22 16–28 161/2 24 141/2–28 151/2–25 16 171/2 171/2 26 141/2–28 141/2–28 141/2–171/2 26 171/2 143/4 143/4 151/2 16–171/2 16–171/2

1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000

GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300

QHK1 116 QHK1S 116 A1GR 117 EQH1GS 117 EQH1R 117 EQHA1GRC 117 EQHC1D2R 117 EQHC117 1D2RC EQHC1D2S 117 EQHC1GR 117 EQHC1GS 117 EQHC1R 117 EQHC1RC 117 EQHC1S 117 Q1 117 Q1R 117 QC1R 117 QH1 117 QH1C 117 QH1G 117 QH1GR 117 QH1GR/C 117 QH1GS 117 QH1R 117 QH1S 117 QHC1D2R 117 QHC1D2S 117 QHC1GR 117 QHC1R 117 QHC1RC 117 QHC1S 117 QHK1G 117 QHK1GC 117 QHK1GR 117 QHK1GRC 117 QHK1GS 117 QHKIGC 117 SR1R 117 XTK2G 125 QH2 127 QHC2R 127 QHK2G 127 XN3 131 XN3 131 XN3C 131 EBXT3DR 135 EBXT3GR 135 EBXT3GS 135 EBX135 TA3GRC EBXTC3GR 135 EBXTP3GR 135 XT3 135 XT3DR 135 XT3DS 135 XT3GR 135 XT3GRC 135 XT3GS 135 XT3GSR 135 XTPH3GR 135 QHK3 136 QHK3S 136 EQH3GS 137 EQHC3GR 137 QH3 137 QH3GR 137 QH3GRC 137 QH3GS 137 QH3GSC 137 QH3R 137 QH3S 137 QHC3GR 137 QHK3GS 137 Kingdream GA114 114 GA115

115

GA124

124

GA125

125

GA134

134

61∕8–121/4 81/2–91/2 61/2–83/4 115∕8 55∕8 121/4 81/2–121/4 91/2

1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000

80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300

GMXWC GMXWC GMXWC GMXWC GMXW GMXWC GMXWC GMXWC

91/2 81/2–133/4 115∕8 81/2–121/4 97∕8 121/4 45∕8–43/4 43/4 105∕8 81/2 83/4 6 61/2–131/2 131/2 83/4 51/2–131/2 51/4 81/2–83/4 73∕8–75∕8 77∕8–131/2 61/4–12 91∕8 71/2–91/2 6–121/4 97∕8 81/2–121/4 81/2 57∕8–121/4 121/4 61∕8–83/4 143/4 41/2 77∕8–105∕8 121/4 22–28 171/2 28 171/2 16–171/2 171/2 171/2

1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000

80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 80–300 60–300 60–300 60–300 60–300 40–250 40–250 40–250 40–250 40–250 40–250 40–250

GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXW GMXW GMXWC GMXWC GMXWC GMXW GMXWC GMXWC GMXWC GMXWC GMXW GMXWC GMXW GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXW GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

171/2 171/2 171/2 23 16 151/2–28 16 151/2–26 16 16 81/2–11 5∕8 121/4 115∕8 81/2–121/4 121/4 121/4 81/2 81/2–83/4 121/4 83∕8–12 83∕8 101/2 121/4

2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000

40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250

GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

6, 81/2, 105∕8, 11, 121/4, 131/2, 133/4, 143/4, 16, 171/2 6, 77∕8, 81/4, 81/2, 97∕8, 11, 115∕8, 12, 121/4, 131/2, 135∕8, 133/4, 143/4, 151/2, 16, 17, 171/2 81/2, 105∕8, 115∕8, 12, 121/4, 143/4, 171/2 77∕8, 81/2, 105∕8, 115∕8, 133/4, 16, 171/2 57∕8, 61∕8, 12, 16, 17, 171/2, 26

1,500–4,000 200–80

1,500–4,000 57∕8, 6, 61∕8, 83∕8, 81/2, 105∕8, 115∕8, 121/4, 135∕8, 131/2, 17, 171/2 6, 91/2, 97∕8, 121/4, 1,500–4,000 131/2, 133/4, 143/4, 16, 171/2 133/4, 143/4, 171/2 1,500–4,000 83∕8, 81/2, 16, 171/2 1,500–4,000 121/4, 171/2 1,000–4,000 171/2 1,000–4,000 81/2, 121/4, 171/2 1,000–4,000 81/2, 115∕8, 12, 1,000–4,000 121/4,16, 171/2 81/2, 121/4 1,000–4,000 83∕8, 81/2, 115∕8, 121/4, 1,000–4,000 151/2, 16, 171/2 33/4, 37∕8, 41∕8, 41/2, 2,000–5,000 45∕8, 43/4, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 75∕8, 77∕8, 81/2, 83/4, 97∕8, 11, 115∕8, 121/4 33/4, 37∕8, 41/4, 41/2, 2,000–5,000 45∕8, 43/4, 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4, 61/2, 71/2, 75∕8, 77∕8, 83∕8, 81/2, 83/4, 91/2, 97∕8, 105∕8, 115∕8, 121/4 35∕8, 33/4, 37∕8, 4, 41∕8, 2,000–5,500 41/4, 43∕8, 41/2, 45∕8, 43/4, 51/2, 57∕8, 6, 61∕8, 61/4, 61/2,71/2, 83∕8, 81/2, 97∕8, 105∕8 33/4, 37∕8, 41/4, 41/2, 2,000–5,500 45∕8, 43/4, 47∕8, 51/2, 57∕8, 6, 61∕8, 61/4, 71/2, 77∕8, 83/4, 97∕8, 105∕8, 11, 131/2, 16 37∕8, 43/4, 57∕8, 6, 61∕8, 61/4, 61/2, 65∕8, 81/2 41∕8, 41/2, 45∕8, 43/4, 2,000–6,000 47∕8, 51/2, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 77∕8, 83∕8, 81/2, 83/4, 97∕8, 105∕8, 11, 115∕8, 121/4 33/4, 37∕8, 43/4, 51/2, 2,000–5,000 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 67∕8, 75∕8, 77∕8, 83∕8, 81/2, 83/4, 9, 91/2, 97∕8, 105∕8, 11, 121/4, 131/2 45∕8, 47∕8, 55∕8, 6, 61∕8, 2,000–5,000 61/4, 61/2, 77∕8, 81/2, 83/4, 9, 91/2, 95∕8, 93/4, 97∕8, 10, 105∕8, 11, 115∕8, 121/4, 123∕8, 131∕8, 131/2 55∕8, 57∕8, 6, 61∕8, 61/2, 2,000–6,000 77∕8, 81/2, 83/4, 121/4 121/4 1,500–5,000 105∕8, 121/4 1,500–5,000 121/4 2,000–5,000 7 81/2, 83/4, 9 ∕8, 121/4 1,500–5,000 81/2, 97∕8, 105∕8, 121/4 1,500–5,000 81/2, 97∕8, 105∕8, 131∕8 2,000–5,000 121/4, 171/2 1,000–4,000 51/2, 61∕8, 61/4, 61/2, 1,500–5,000 63/4, 77∕8, 81/2, 83/4, 91/2, 97∕8, 11, 12, 121/4, 131/2 81/2, 83/4, 115∕8, 121/4, 2,000–5,500 131/2, 133/4, 143/4, 171/2 83/4, 121/4 3,000–5,500 81/2, 91/2, 121/4 3,000–5,500 121/4, 171/2 1,000–4,000 115∕8, 121/4, 171/2, 26 1,000–4,000 121/4, 171/2 1,000–4,000

GA135

135

GAT115

115

GAT125 GAT135 GJ115 GJ125 GJ135 GJT115

125 135 115 125 135 115

GJT125 GJT135

125 135

HA116

116

HA117

117

HA126

126

HA127

127

HA136

136

HA137

137

HAT117

117

HAT127

127

HAT137

137

HJ117 HJ127 HJ137 HJT117 HJT127 HJT137 MD115 MD117

117 127 137 117 127 137 115 117

CGL

SWT115

115

1,500–4,000 200–80

CGL

1,500–4,000 200–80

CGL

1,500–4,000 200–80

CG

1,500–4,000 200–80

CG

SWT117 117 SWT127 127 W111 111 W121 121 W131 131 ReedHycalog Bits RHT1 117 83/4, 91/4 RT1 116, 61/2, 81/2, 91/2, 97∕8, 117 101/4, 101/2, 105∕8, 11, 111/4, 121/4 RT2 127 57∕8, 6, 61∕8, 61/4, 61/2, 63/4 RT3 137 81/4, 83∕8, 115∕8

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Soft and Soft Sticky

200–80

CGL

200–80

CGL

200–80 200–80 350–80 350–80 350–80 350–80

CGL GLC CGL CG CGL CGL

350–80 350–80

CGL CGL

150–80

CGL

150–80

CGL

150–70

CG

150–70

CGL

GL 120–60

CGL

180–80

CGL

180–80

CGL

120–60

GLC

300–80 300–80 300–80 300–80 300–80 300–80 350–80 300–80

CG CG CG CGL CGL CGL CGL CG

200–80

CG

120–80 120–70 200–80 200–80 200–80

CG CG CG CG

1,000–5,000 200–60 1,000–5,000 200–60

CGMW CGMW

1,000–5,100 200–60

GMW

1,000–5,100 200–60

CGMW

World Oil® / JANUARY 2017 D-3

S13 T11

T13 TC11 TCH10 TCH11 TH11 TH13 Y11 Y13 Rubicon G110

G110H

2,000–6,000 75–250

113

116 117

G11S

114

G11SH

115

G120

121

123

G12F

126

G12FH

127

G12S

124

G12SH

125

G130

131

G13F

133

136

G13FH

137

G13S

134

41∕8, 4½, 45∕8, 4¾, 55∕8, 57∕8, 6, 61∕8, 6¼, 6¾, 77∕8, 83∕8, 8½, 85∕8, 8¾, 95∕8, 97∕8, 105∕8, 12, 12¼, 13¾, 14, 14¾, 15, 16, 17, 17½ 41∕8, 4½, 45∕8, 4¾, 55∕8, 57∕8, 6, 61∕8, 6¼, 6¾, 77∕8, 83∕8, 8½, 85∕8, 8¾, 95∕8, 97∕8, 105∕8, 12, 12¼, 13¾, 14, 14¾, 15, 16, 17, 17½ 6, 61∕8, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 61∕8, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 41∕8, 4½, 45∕8, 4¾, 55∕8, 57∕8, 6, 61∕8, 6¼, 6¾, 77∕8, 83∕8, 8½, 85∕8, 8¾, 95∕8, 97∕8, 105∕8, 12, 12¼, 13¾, 14, 14¾, 15, 16, 17, 17½ 41∕8, 4½, 45∕8, 4¾, 55∕8, 57∕8, 6, 61∕8, 6¼, 6¾, 77∕8, 83∕8, 8½, 85∕8, 8¾, 95∕8, 97∕8, 105∕8, 12, 12¼, 13¾, 14, 14¾, 15, 16, 17, 17½ 6, 61∕8, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 61∕8, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 41∕8, 4½, 45∕8, 4¾, 55∕8, 57∕8, 6, 61∕8, 6¼, 6¾, 77∕8, 83∕8, 8½, 85∕8, 8¾, 95∕8, 97∕8, 105∕8, 12, 12¼, 13¾, 14, 14¾, 15, 16, 17, 17½ 41∕8, 4½, 45∕8, 4¾, 55∕8, 57∕8, 6, 61∕8, 6¼, 6¾, 77∕8, 83∕8, 8½, 85∕8, 8¾, 95∕8, 97∕8, 105∕8, 12, 12¼, 13¾, 14, 14¾, 15, 16, 17, 17½ 6, 61∕8, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 61∕8, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½

1,000–5,200 350–60

CGS

1,000–5,200 350–60

CGS

1,000–3,500 350–60

CGMW

1,000–3,500 1,000–5,000 1,000–3,500 1,000–5,000

350–60 200–60 200–60 200–60

CGMW CGMW CGMW CGMW

1,000–3,000 350–60

CGMW

1,000–3,700 350–60 1,000–3,500 350–60

CGMW CS

1,000–3,500 350–60

CS

2,000–6,000 75–250

G13SH

115

P11FH P13SH

117 135

P13FH 137 Smith Bits DSJ 111 DSJH DSUJ FDGH

FDT GFDH GGH+ MFDGH MSDGH

2,000–5,000 70–100

G

2,000–6,000 75–250

S

MSDS MSDSH MSDSS MSDSSH SB111 SB113 SB114 SB115

2,000–6,000 75–250

G

SB115H SB116 SB117

2,000–5,000 70–100

2,000–6,000 75–250

2,000–6,000 75–250

G

SB127 SB135 SB137 SBK117 SDGH SDS SDSH SDSSH SG134 TCT+ TCTI+ XR+

2,000–6,000 60–120 2,000–6,000 60–120

G

2,000–6,000 75–250

S XR+

2,000–6,000 75–250

G

XRK+ XRXI+ TIX–TSK S S

3,000–7,000 60–175

3,000–7,000 60–175

G

3,000–7,000 60–110 3,000–7,000 60–110

G

3,000–7,000 60–175

S

D-4 2017 Drill Bit Classifier

135

P11SH

FDS FDS+

G

S

6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 81/2 ,83/4, 97∕8, 105∕8, 121/4, 131/2, 143/4, 16, 171/2 83/4, 97∕8, 121/4 81/2, 83/4, 97∕8, 121/4, 131/2, 133/4, 143/4, 171/2 81/2

143/4, 171/2, 191/4, 26, 261/2, 28, 30, 36 111 36 111 36 137 57∕8, 6, 81/2, 105∕8, 121/4, 143/4 116 11 116 77∕8, 81/2, 83/4, 9, 91/4, 101/2, 121/4 126 61∕8, 71/2, 75∕8 137 81/2, 121/4 135 121/4, 16, 171/2 137 83∕8, 81/2 135 171/2, 20, 22, 23, 24, 26, 28, 30, 34 114 35 115 17 114 33 115 26, 32 111 16 113 171/2 114 30 115 131/2, 133/4, 141/2, 143/4, 151/2, 16, 171/2, 181/2, 24, 26 115 26 116 61∕8 117 41/2, 45∕8, 43/4, 81/2, 83/4, 97∕8, 105∕8, 115∕8, 121/4, 143/4, 151/2, 171/2 127 121/4, 143/4 135 121/4, 171/2 137 81/2, 121/4 117 41/2 135 171/2 114 22 115 171/2, 22 115 16 134 171/2, 25 117T 16 117T 81/2, 83/4, 121/4, 16, 171/2, 24, 26 115 14, 141/2, 143/4, 151/2, 153/4, 16, 163∕8, 161/2, 17, 171/2, 181∕8, 181/2, 191/4, 20, 22, 223∕8, 23, 24, 257∕8, 26, 28, 30, 32, 323∕8, 35, 36 117 41/2, 45∕8, 43/4, 51/4, 51/2, 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 7, 77∕8, 81/4, 83∕8, 81/2, 83/4, 91/2, 97∕8, 105∕8, 115∕8, 12, 121/4, 131/2 117 57∕8, 61/2, 81/2, 121/4 115 171/2 121 121 121

S–MZGC

124

SS SS

111 111

SS

111

SS–MZGC 114 SS–TMG SS–TX

117 117

57∕8, 6, 61/4, 75∕8, 77∕8 83∕8, 81/2, 85∕8, 83/4, 95∕8, 97∕8, 105∕8, 11, 115∕8, 12, 121/4 133/4, 143/4, 15, 151/2, 16, 171/2, 20, 22, 23, 24, 26 16, 171/2, 20, 22, 23, 24, 26 6, 61/4, 77∕8 83∕8, 81/2, 85∕8, 83/4, 95∕8, 97∕8, 11, 115∕8, 12, 121/4 133/4, 143/4, 15, 151/2, 16, 171/2, 20, 22, 23, 24, 26 16, 171/2, 20, 22, 23, 24, 26 81/2, 121/4 81/2, 121/4

3,000–7,000 60–175

G

SS–X

116

SS–X

116

SS–X SS–XZ SS–XZC SS–Z

116 114 114 114

SS–Z

114

S–TX S–TX S–X

127 127 126

S–X

126

S–X S–XZ S–XZC S–Z

126 124 124 124

S–Z

124

2,000–6,000 75–275

CGW

2,000–6,000 75–275 3,000–7,000 60–275

CGW CGW

3,000–7,000 60–275

GW

1,000–3,000 180–70

S

1,000–3,000 180–70 1,000–3,000 180–70 2,000–5,000 160–50

S S S

1,000–5,000 160–50 1,000–5,000 160–50

S S

1,500–5,000 1,000–5,000 1,000–4,000 1,000–5,000 1,000–4,000

160–50 300–50 300–50 220–50 220–50

S BHMS BGHM HM HM

1,000–3,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–3,000

220–50 220–50 220–50 220–50 180–70 160–50 160–50 160–50

HM HM HM HM S S S S

Tri–Max TM111 TM114 TM115 TM116 TM117 Varel E114 DT1 DT1G

1,000–3,000 160–50 1,000–3,000 160–50 1,000–4,000 160–50

S S S

ES1G

1,000–4,000 1,000–3,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–4,000 1,000–4,500 1,000–4,500

S S S BS S S S S S BGHMT BGHMT

160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 280–50 280–50

1,000–5,000 300–50

BHMS

1,000–5,000 300–50

BHMS

1,000–5,000 300–50 1,000–5,000 300–50

BHMS BHMS

1,000–4,000 150–60 1,000–4,500 180–80

S S

1,000–3,500 180–80

S

1,500–3,500 250–80

CGMW

1,000–4,000 150–60 1,000–4,500 200–80

S S

1,000–3,500 200–80

S

1,500–3,500 250–80

CGMW

1,000–4,500 250–60 1,500–4,500 120–60

GMW S

E111

E113 E121

111 114 115 116 117

57∕8, 6, 61∕8, 61/4, 75∕8, 77∕8 83∕8, 81/2, 83/4, 97∕8, 105∕8, 115∕8, 12, 121/4 151/2, 16, 171/2 81/2, 121/4 16, 171/2 83∕8, 81/2, 83/4, 97∕8, 115∕8 12, 121/4 133/4, 143/4, 15, 16, 171/2, 20, 22, 23, 24, 26 81/2, 121/4 16, 171/2 57∕8, 6, 61∕8, 61/4, 75∕8, 77∕8 83∕8, 81/2, 83/4, 95∕8, 97∕8, 105∕8, 115∕8, 12, 121/4 151/2, 16, 171/2 81/2, 121/4 16, 171/2 83∕8, 81/2, 83/4, 95∕8, 97∕8, 105∕8, 115∕8, 12, 121/4 15, 16, 171/2, 20, 22, 23, 24, 26 81/2–171/2 81/2–171/2 6–171/2 6–171/2 6–171/2

GTX–03H MX–00 MX–03 VG–00 VG–03 VG–03M VGA–02 VGA–02M VM–03 VM–03M VM–03MH GX–00 GX–03 GX–03H MX–03 STX–03 VG–03 VGA–03 VGD–03H GTX–09

415 415 415 415 415 415 415 415 415 415 415 417 417 417 417 417 417 417 417 435

GTX–09H GTX–11 GTX–11H MX–09 MX–09H VG–09 VG–11 VGA–10 VGA–10M VM–09 VM–09G VM–11HM VMA–10M GT–09C GX–09

435 435 435 435 435 435 435 435 435 435 435 435 435 437 437

171/2, 23, 24, 26, 28, 30 17 171/2 171/2, 181/2 24 22 22, 24, 26 171/2, 22 16 16, 171/2 16, 171/2 171/2 83/4 77∕8, 83/4, 121/4 81/2 61∕8, 81/2, 103∕8, 121/4 61∕8 83/4 121/4 121/4 143/4, 16, 171/2, 20, 23 161/2, 26, 27 22 22 143/4, 16, 19 171/2 24 28 22, 23, 28 16, 17 143/4 171/2, 181∕8, 181/4 171/2 171/2 77∕8 83∕8, 81/2, 85∕8, 83/4, 97∕8, 121/4

Special features/ usage

1,500–4,000 120–60

S

1,500–4,500 120–60

S

1,500–3,500 1,000–4,000 1,500–3,500 1,500–4,500

S MW CW S

120–60 250–80 150–80 150–80

1,500–3,500 150–80

S

2,000–4,500 120–60 1,500–4,000 120–60 1,500–4,000 120–60

S S S

2,000–4,500 120–60

S

1,500–4,000 1,000–4,000 1,500–3,500 1,500–4,500

S MW CW S

120–60 250–80 150–80 150–80

1,500–3,500 150–80

S

1,000–3,000 2,000–3,000 2,000–3,000 2,000–4,000 2,000–4,000

100–200 100–200 80–150 80–150 80–150

G GB GB GB GB

150–50 300–50 300–50

MW S CGMW

300–50

CGMW

150–50

CS

150–50 150–60

CS S

114S 34, 36 1,000–5,000 116S 83∕8 1,500–5,000 117S 61∕8, 61/4, 61/2, 63/4, 1,500–5,000 77∕8, 81/4, 81/2, 83/4, 97∕8, 11, 115∕8, 12, 121/4, 131/2, 133/4 115S 143/4, 151/2, 16, 1,000–5,000 17, 171/2, 181∕8, 181/4, 22, 26, 271/4, 28, 36 111S 143/4, 15, 16, 171/2, 1,000–4,000 20, 21, 22, 23, 24, 26, 271/2, 32, 33, 34, 36, 371/4, 381/4, 42, 44 113S 26, 28, 36 1,000–4,000 121S 121/4, 133/4 1,500–5,000 Insert roller cone bits

Baker Hughes GTX–03 415

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

111

G11FH

G130H

Recommended WOB, lb/in. diameter

115, 81/2, 105∕8, 115∕8, 116, 121/4, 131/2, 151/2, 117 16, 171/2, 181/2, 26 135, 81/2, 105∕8, 115∕8, 12, 137 16, 171/2 115 131/2, 141/2, 143/4, 16, 161/2, 17, 181∕8, 181/4, 20, 22, 23, 24, 26, 28 135 16, 171/2, 26 117 97∕8 117 121/4 117 77∕8, 81/2, 83/4, 97∕8, 121/4 115 16, 171/2, 181∕8, 181/4, 181/2 135 16, 171/2 111 121/4, 131/2, 133/4, 143/4, 171/2, 24, 26 131 26

G11F

G120H

Size range, in.

IADC code

Manufacturer, Bit name/model number S11

1,400–3,900 135–30

CX

1,600–3,900 1,400–3,500 1,400–3,500 1,400–3,900 1,400–3,900 1,400–3,900 1,600–3,900 1,600–3,900 1,400–3,500 1,400–3,500 1,400–3,500 1,900–5,100 1,900–5,100 1,900–5,100 2,100–5,000 1,300–3,300 1,900–5,100 1,900–5,100 1,900–5,100 1,500–4,300

135–70 350–80 350–80 135–30 135–30 135–30 135–70 135–70 350–80 350–80 350–80 215–80 215–80 215–80 350–80 300–80 215–80 215–80 215–80 130–25

CX BCMX BCMX BCGWX BCGWX BCGWX BCGWX BCGWX BGMWX BGMWX BGMWX X X X BCMX MX BGWX BGWX BGMWX CX

1,500–4,300 1,500–4,300 1,500–4,300 1,600–4,100 1,600–4,100 1,500–4,300 1,500–4,300 1,500–4,300 1,600–4,300 1,600–4,100 1,900–4,700 1,600–4,100 1,600–4,100 2,200–5,400 2,200–5,400

130–25 130–25 130–25 350–80 350–80 130–25 130–25 130–25 130–65 350–80 245–80 350–80 350–80 205–80 205–80

CX CX CX BCMX BCMX BCGWX BCGWX BCGWX BCGWX BGMWX BGMWX BGMWX BCGMWX CY CX

MX–09C MX–09H MX–11 MXB–09 STX–09 VG–09 VGA–09 VGA–11 VGD–09H VM–09 VM–11G VMA–09H VMA–11H VMD–08N VMD– 09GN VMD–11G GTX–18 MX–18 MX–18H VGA–18 VM–18 GX–18 GX–18G GX–18H MX–18 MX–18H STX–18 STX–18H VG–18 VGD–18 VM–18

437 437 437 437 437 437 437 437 437 437 437 437 437 437 437 437 445 445 445 445 445 447 447 447 447 447 447 447 447 447 447

VMA–18 447 VMD–18 447 VMD–18H 447 Halliburton A02RC 415 EBXT415 02D2R EBXT415 02D3SL EBXT415 02DR EBXT415 02DSL EBXT415 02DSR EBXT02R 415 EBXT02RC 415 EBXT02S 415 EBXT02SL 415 EBXT415 02SLC EBXT02SR 415 EBXTD02R 415 XT02R 415 XT02RC 415 XT02S 415 XT02SC 415 XT04R 415 EQH02 417 EQH02DR 417 EQH02R 417 EQH04R 417 EQH04RC 417 QH04R 417 QH05R 417 QHK04 417 EBXT06R 425 EBXT08DR 425 EBXT08R 425 EBXT08RC 425 EBXT08S 425 EBXT08SL 425 EBXT10RL 425 XT08D2S 425 XT08R 425 XT08S 425 EQH08R 427 QH09R 427 Kingdream GA415 435

GMXWC GMXWC GMXWC

445

171/2

2,000–5,000 80–250

157∕8–26

2,000–5,000 80–250

GMXWC

171/2–181/4

2,000–5,000 80–250

GMXWC

24–26

2,000–5,000 80–250

GMXWC

16–26 22–23 16 171/2 171/2

2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000

80–250 80–250 80–250 80–250 80–250

GMXWC GMXWC GMXWC GMXWC GMXWC

221/4 22–28 17–171/2 171/2 16–26 171/2 171/2 81/2–121/4 81/2 81/2–131/2 83/4–121/4 121/4 121/4 83/4 97∕8 16 26 16–26 26 16 171/2 171/2 171/2 171/2 171/2 81/2–121/4 77∕8–83/4

2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000

80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250 80–250

GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMYWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMYWC

57∕8, 61∕8, 81/2, 83∕8, 121/4, 171/2 171/2

1,000–4,000 200–80

CG

1,000–4,000 200–80

CG

HA427

447

HA437 447 HA447 447 HA447GJ 417

HA447GX 427 HAT417 437

HAT427

447

HAT437 HAT447

417 437

HJ417 HJ437 HJ447 HJ447GX HJS417GL HJS437GL HJS447GL HJT417 HJT437

447 447 417 437 447 417 437 447 437

HJT447

447

MD437 437 MD447 447 SMD437 437 ReedHycalog Bits R01A 427 R03A 427 R07 437 R07A 437 R09A 437 R11A 447 R12A 447 R14A 437 R15A 447 RD12 437 RD15 437 RH09A RH12A RH14A RH15A S41A

S44

447 447 415 425 435, 437 445 445, 447 415

S44A T41 T41A

415 425 435

T42 T43 T43A T44 T44A TH41A TH42A

435 445 445 415 425 435 445

S42A S43A

2,000–5,000 140–70

CGL

2,000–5,000 140–60 2,000–5,000 140–60

CGLY CGLY

2,000–5,500 140–60

CGLY

2,000–5,500 140–60 2,000–5,500 140–60 2,000–5,000 140–70

CGL

2,000–5,000 140–70 2,000–5,500 140–60

CGY CGL

2,000–5,500 140–60

CGLY

2,000–5,000 280–70 2,000–5,000 280–60

CGL CGL

2,000–5,500 2,000–5,500 2,000–5,000 2,000–5,000 2,000–5,500 2,000–5,000 2,000–5,000 2,000–5,500 2,000–5,500

GY G GL G G CGL CGL CGLY CXY

240–60 240–60 280–70 280–60 240–60 280–70 280–60 240–60 300–60

2,000–5,500 240–60

CXY

2,000–3,000 400–100 GL 2,000–3,500 400–180 GL 1,500–4,000 180–60

G10T G15B G18DBD GF04B GF05B GF08B GF10B

435X 445X 445X 417X 427X 437X 437X

GF15 GF15B GF15BD GFH03 GFI04 GFI05 GFI10 GFI10U GFI12B GFI15B GFK08B GFK08BD GFK15B GFS04B GFS05B GFS06 GFS10 GFS10B GFS11YB GFS15 GFS15WB GFSI01B GFSI06B GFSI06UB GFSI10 GFSI12 GI01B GI03BD GI12 GI12HUB GI15UB GS03 GS03B

447X 447X 447X 417X 417X 427X 437X 437X 437X 447X 437X 437X 447X 417X 427X 427X 437X 437X 437Y 447X 447X 417X 427X 427X 437X 437X 415X 415X 435X 435X 447X 415X 415X 415X 415X 425X 425X 425X 425X 435X 435X 435X 435X 435X 435X 435X 445X 445X 445X 415X 415X 415X 425X 435X 435X 435X

115∕8 55∕8, 53/4, 121/4 77∕8, 81/2 81/2 6 77∕8 97∕8, 115∕8, 121/4 81/2 81/2, 121/4 83/4 61∕8, 81/2, 105∕8, 121/4, 125∕8 83/4 81/2, 97∕8, 121/4 16 16 81/2, 121/4, 16, 171/2

2,000–3,500 2,000–3,500 2,000–6,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,500 2,000–5,500

200–60 200–60 200–60 200–60 200–60 200–60 200–60 200–60 200–60 200–60 200–60

CGMWY CGMX GMWX GMWX GMWX GMWX CGMWX GHMWZ CGHMWZ GMWX CGMWX

2,000–5,500 2,000–5,500 2,000–5,500 2,000–5,500 2,000–6,000

200–60 200–60 450–60 450–60 450–60

CGMWX CGMWX X X X

171/2 81/2, 121/4, 16

2,000–6,000 450–60 2,000–6,000 450–60

Y X

16, 161/2, 17, 171/2, 181∕8, 20, 22, 26, 28 231/2, 24 16, 171/2 143/4, 16, 161/2, 181∕8, 181/4, 20, 22, 23, 28 22, 26 143/4, 16, 17, 171/2 24 16, 171/2 16, 171/2, 22 16, 171/2, 22 16, 171/2

2,000–6,000 450–60

YW

2,000–6,000 450–60 2,500–7,500 450–60 2,000–6,000 450–60

XW YW YW

GS04B GS04UB GS05 GS05B GS08B GS09 GS10 GS10B GS12 GS12B GS12BD GS12HB GS12HBD GS15 GS18

2,000–6,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–6,000 2,000–6,000 2,000–5,000

XW CGMWY CGMWX CGMWX CGMWX CGMWX CGMWX

GS18B GSI01B GSI03B GSI03BD GSI06UB GSI12B GSI12HB GSI12HUB

450–60 450–60 450–60 450–60 450–60 450–60 450–60

Special features/ usage

2,000–5,000 80–250 2,000–5,000 80–250

427 437

CG CGL CGL

Recommended rotary speed, rpm

22 171/2

GJT445 HA417

1,000–3,500 350–80 1,000–4,000 350–80 1,000–3,500 350–80

TH43A 445 TH44A 445 Rubicon G42FH 427 G43FH 437 G44SH 445 P41FH 417 P43SH 435 P44SH 445 Smith Bits F02B 417X F1 437X F12Y 437Y FH16B 447X FHI04 417X FHI07YV 427Y FHI08 437X FHI18B 447X FHI18Y 447Y FHK15 447X G03B 415X G04B 415X G08B 435X G10B 435X

Recommended WOB, lb/in. diameter

BGMWX BGMWX BGMWX

417

CGL CG CG CG CGL

Size range, in.

2,100–5,500 350–80 2,400–5,900 350–80 2,400–5,900 350–80

GJT435

CGL

200–80 200–80 350–80 350–80 350–80

IADC code

BGMWX CX BMX BMX BGWX BGMWX X GX X BMX BMX MX MX BGWX BGMWX BGMWX

425 435 445

1,000–3,500 200–80 1,000–4,000 1,000–4,000 1,000–3,500 1,000–4,000 1,000–3,500

Manufacturer, Bit name/model number

350–80 125–60 350–80 350–80 125–60 350–80 195–80 195–80 195–80 350–80 350–80 285–80 285–80 285–80 285–80 350–80

GJ435 GJT415 GJT425

133/4, 143/4, 16, 17, 171/2 133/4, 143/4, 16, 171/2 16, 171/2 171/2 171/2 81/2, 115∕8, 121/4, 16, 171/2 16, 171/2 12, 121/4, 16, 171/2 12, 121/4, 16, 17, 171/2 41∕8, 43/4, 57∕8, 61∕8, 81/2, 83∕8, 91/2, 97∕8, 101/2, 105∕8, 121/4, 171/2 6, 77∕8, 81/2, 97∕8, 121/4 37∕8, 41∕8, 43/4, 51/2, 57∕8, 6, 61∕8, 61/4, 61/2, 71/2, 77∕8, 83∕8, 81/2, 91/2, 97∕8, 105∕8, 115∕8, 121/4 41∕8, 57∕8, 61∕8, 83∕8, 81/2, 83/4, 91/2, 115∕8, 121/4, 171/2 83/4 81/2, 91/2 43/4, 47∕8, 55∕8, 61/4, 77∕8, 83∕8, 81/2, 83/4, 97∕8, 105∕8, 11, 121/4, 133/4 77∕8, 97∕8, 121/4 47∕8, 52∕3, 55∕8, 6, 61∕8, 61/4, 77∕8, 81/2, 83/4, 91/2, 97∕8, 105∕8, 11, 121/4 55∕8, 61∕8, 61/4, 63/4, 75∕8, 77∕8, 81/2, 83/4, 97∕8, 101/4, 105∕8, 121/4 81/2, 91/2, 97∕8, 121/4 77∕8, 81/2, 83/4, 91/2, 95∕8, 97∕8, 121/4 81/2, 83/4, 91/2, 121/4 91/2, 95∕8, 121/4 81/2 81/2 81/2 81/2, 97∕8, 121/4 81/2, 811∕16, 97∕8, 121/4 81/2, 811∕16, 121/4 51/2, 6, 61∕8, 63/4, 81/2, 83/4, 91/2, 97∕8, 121/4 6, 61∕8, 77∕8, 83∕8, 81/2, 83/4, 91/2, 97∕8, 121/4 81/2, 121/4 81/2, 121/4 45∕8, 43/4, 6

Special features/ usage

2,400–5,600 1,800–4,500 1,600–4,300 1,600–4,300 1,800–4,500 1,600–4,300 2,200–5,700 2,200–5,700 2,200–5,700 2,100–5,500 2,100–5,500 1,300–4,000 1,300–4,000 1,300–4,000 1,300–4,000 2,400–5,900

435 445 415 435 415

Recommended rotary speed, rpm

81/2 161/2, 171/2 143/4 171/2 16 143/4, 151/2 77∕8, 81/2, 115∕8, 121/4 121/4 121/4 57∕8, 6, 61∕8, 77∕8, 81/2 57∕8, 6, 61∕8, 63/4, 121/4 41/2, 61∕8, 63/4 6 61∕8, 81/2 6, 83/4 61∕8, 81/2, 83/4, 97∕8, 121/4 61∕8 81/2 121/4

415

Recommended WOB, lb/in. diameter

BMY MBX BMX BMX MX BGWX BGWX BGWX BGMWX BGMWX BGMWX BGMWX BGMWX BGMWX BGMWX

GA435 GA445 GAT415G GAT435 GAT445 GJ415

Size range, in.

350–80 350–80 350–80 350–80 300–80 205–80 205–80 205–80 205–80 350–80 350–80 350–80 350–80 350–80 350–80

IADC code

2,400–5,600 2,100–5,100 2,400–5,600 2,400–5,600 1,300–4,000 2,200–5,400 2,200–5,400 2,200–5,400 2,200–5,400 2,400–5,600 2,400–5,600 2,100–5,100 2,400–5,600 2,400–5,600 2,400–5,600

Manufacturer, Bit name/model number

CY X X X BMX

83/4, 121/4, 131/2 81/2 77∕8 121/4 6, 81/2, 91/2, 97∕8, 105∕8, 115∕8, 12, 121/4, 143/4, 16, 19 81/2 6, 61∕8, 121/4, 171/2 81/2 81/2 51/2, 57∕8, 6, 61∕8, 61/4 97∕8 81/2 121/4 81/2 63/4, 81/2, 121/4 97∕8 6, 81/2 121/4 81/2 81/2

Special features/ usage

Recommended rotary speed, rpm 205–65 205–80 205–80 205–80 350–80

Size range, in.

Recommended WOB, lb/in. diameter

437 437 437 437 437

GA425

1,600–5,400 2,200–5,400 2,200–5,400 2,200–5,400 2,400–5,600

IADC code

Manufacturer, Bit name/model number GX–09C GX–09H GX–11 GX–11H MX–09

16, 171/2 16, 171/2

2,000–5,000 450–60 2,000–5,000 450–60

CGMWX CGMWX

6, 8½, 97∕8, 12¼ 6, 8½, 97∕8, 12¼ 17½ 81/2, 97∕8, 121/4 171/2 171/2

1,500–3,500 1,500–3,500 1,500–4,000 1,500–3,500 1,500–4,000 1,500–4,000

60–120 60–120 60–110 75–275 75–275 75–275

GW GW SG GW GWC GWC

105∕8 121/4 77∕8 83/4 81/2 77∕8 77∕8 83/4 77∕8 81/2 181∕8 121/4, 24, 26, 32 23 143/4, 16, 161/2, 171/2, 181∕8 171/2 171/2 16 121/4 121/4 81/2 81/2, 83/4, 91/4, 121/4, 131/2 81/2, 85∕8 83∕8, 121/4 121/4 83/4 81/2 97∕8 105∕8 81/2 121/4 121/4 81/2 81/2 121/4 121/4 121/4 81/2 105∕8 12, 121/4 121/4 81/2 121/4 121/4 121/4 121/4 81/2 81/2 171/2 171/2 36 171/2 16 181/2 16, 161/2, 171/2, 181∕8, 181/2 121/4, 231/2, 24, 26 26 16 171/2 28 26 151/2 143/4, 171/2, 181/2 22 23 22 171/2 171/2 203/4 16, 17, 171/2, 24, 26, 28 16, 24 16 16, 171/2 171/2 16, 221/2 16, 171/2, 22 171/2 171/2

2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000

160–50 160–50 160–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 300–50 300–50 300–50 300–50

X X Y WX X Y X WX Y BX BGHMTWX BGHMWX BGHMWX BGHMWX

1,000–4,000 1,500–4,000 1,500–4,000 1,000–5,000 1,000–5,000 2,000–5,000 2,000–5,000

300–50 250–50 250–50 280–50 280–50 280–50 280–50

BGHMWX BGHMWX BGHMWX BGHMWX BGHMWX BGHMWX BGHMWX

2,000–5,000 2,000–5,000 2,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 1,000–5,000 1,000–5,000 1,000–5,000 2,000–5,000 2,000–5,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 2,000–5,000 1,000–4,000 1,000–4,000

280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 300–50 300–50 300–50 300–50 280–50 300–50 300–50

BGHMX BGHMWX BGHMWX BGHMX BGHMX BGHMX BGHMX BGHMX BGHMWX BGHMWX BGHMWX BGHMWX BGHMX BGHMWX BGHMWX BGHMX BGHMX BGHMWX BGHMWY BGHMX BGHMWX BGHMWX BGHMWX BGHMWX BGHMX BGHMX BGHMWX BGHMWX BGHMX BGHMWX BGHMX BGHMX BGHMWX

1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,500–4,000 1,500–4,000

300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 250–50 250–50

BGHMWX BGHMWX BGHMWX BGHMWX BGHMWX BGHMX BGHMX BGHMWX BGHMX BGHMWX BGHMWX BGHMWX BGHMWX BGHMX BGHMX

1,500–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–4,000

250–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50

BGHMWX BGHMWX BGHMWX BGHMWX BGHMWX BGHMWX BGHMWX BGHMWX

World Oil® / JANUARY 2017 D-5

GLMX

M15GFSP 447X MZ05GFC MZ08GFC MZ10GFC MZ15GFPC X10G

415X 425X 435X 445X

1,000–5,000 250–60

GLMX

1,000–3,500 1,000–3,500 1,000–3,500 1,000–3,500

CGMX CGMX CGMX CGLMX

437X 83∕8, 81/2, 83/4, 97∕8, 1,500–4,500 115∕8, 12, 121/4 X10GY 437Y 81/2, 121/4 1,500–4,500 X15G 447X 83∕8, 81/2, 83/4, 97∕8, 1,500–5,000 115∕8, 12, 121/4 XZ05GC 415X 16, 171/2 1,000–3,500 XZ08GC 425X 16, 171/2 1,000–3,500 XZ10GF 435X 81/2, 121/4 1,000–4,000 XZ10GFC 435X 16, 171/2 1,000–3,500 XZ15GFP 445X 81/2, 121/4 1,000–4,500 XZ15GFPC 445X 16, 171/2 1,000–3,500 Varel ES04V 415X 143/4, 16, 17, 171/2 1,000–4,000 HE04V 417X 121/4 1,000–5,000 HE04 417X 105∕8, 105∕8, 11, 1,000–5,000 131/2, 133/4 HE09V 427X 81/2, 85∕8 1,250–5,000 ES14 435X 22, 23, 231/2, 26, 28 1,000–4,500 ES14 435X 151/2, 16, 171/2, 1,000–4,500 181/4, 28, 30 ES13V 435Y 16 1,000–4,500 HE10V 437X 81/2, 85∕8 1,250–5,000 ES12V 435X 143/4 1,000–4,500 HE12 437X 131/2 1,250–5,000 HE12V 437X 121/4 1,250–5,000 CM14 437X 57∕8 1,250–5,000 HE14 437X 105∕8 1,250–5,000 HE14V 437X 71/2, 75∕8, 83∕8, 81/2, 1,250–5,000 5 11 8 ∕8, 8 ∕16, 83/4, 105∕8, 115∕8, 12, 121/4 ES18V 445X 143/4, 16, 171/2, 181/2 1,500–4,500 CM18 447X 55∕8, 6 1,500–5,500 HE18V 447X 77∕8, 81/2, 811∕16, 83/4, 1,500–5,500 97∕8, 121/4 Fish tail bits Bit–Tech 1 3 B44–M M232 6 ∕4, 4 ∕4 300–2,000

D-6 2017 Drill Bit Classifier

250–80 250–80 250–80 250–80 120–60

GX

120–60 120–60

GY GX

150–80 150–80 250–80 150–80 250–80 150–80

CGX CGX GMX CGX GLMX CGLX

300–50 300–50 300–50

CMW CMW CMW

300–50 150–50 300–50

CMW CMW CMW

300–50 300–50 300–50 300–50 300–50 275–50 300–50 300–50

CMW CMW CMW CMW CMW MW CMW CMW

300–50 275–50 300–50

CMW CMW CMW

D416 100–500 ADGMVW

D419

31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 45∕8 61∕8, 83/4 61∕8 97∕8 41∕8–28 41∕8–28 31∕8–28 31∕8–28 6, 61/2 61/2 61∕8 31∕8–28 31∕8–28 31∕8–28 31∕8–28 57∕8–28 57∕8–28 81/2 57∕8–28 57∕8–28 57∕8–28 57∕8–28 81/2, 97∕8 61∕8 81/2 57∕8–28 57∕8–28 81/2

235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 500–2,500

350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 60–400 60–400 60–400 350–50 350–50 350–50 350–50 60–400 60–400 60–400 350–50 350–50 350–50 350–50 350–50 350–50 60–400 350–50 350–50 350–50 350–50 60–400 60–400 60–400 350–50 350–50 60–400

DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW

61/4, 43/4

63/4, 77∕8, 81/2, 83/4 6, 61∕8, 61/4, 61/2, 63/4, 77∕8, 81/2, 83/4, 97∕8 M122 6, 61∕8, 61/4, 61/2, 63/4, 77∕8, 81/2, 83/4, 97∕8 M122 6, 61∕8, 61/4, 61/2, 63/4, 77∕8, 81/2, 83/4, 97∕8

300–2,000

100–500 ADGMVW

250–2,500 250–2,500

60–350 60–350

DGHMVW DGHMVW

250–2,500

60–350

DGHMVW

250–2,500

60–350

DGHMVW

Special features/ usage

GLMX

1,000–5,000 250–60

447X

X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U

Recommended rotary speed, rpm

M15GFP

60–250 60–250 60–250 60–250 60–250 60–250 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400

Recommended WOB, lb/in. diameter

1,000–4,500 250–60

M10GFSP 437X

400–2,000 400–2,000 400–2,000 400–2,000 400–2,000 400–2,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000

Size range, in.

AY GMX GMX GMX GLMX

M122 63/4, 77∕8, 81/2, 83/4, 97∕8, 121/4 Drill Master, Inc. M313 M131 63∕4 M316 M121 77∕8 M319 M121 81∕2 Halliburton MMD26 M122 16 MMG66 M122 141/2 FC244iL M123 81/2 GTD26 M123 171/2 M65 M123 161/2 M66 M123 171/2 M76 M123 143/4 MM56M M123 151/2 MM65 M123 171/2 MM66 M123 131/2–171/2 MM66M M123 143/4 MM75M M123 143/4 MMD66 M123 17 MME55 M123 121/4 MMG85M M123 181∕8 M75 M124 161/2 MM56C M124 121/4 MMD75D M124 161/2 MMG76 M124 171/2 FC264Li M131 81/2 FC284Li M132 121/4 FC3743 M132 121/4 CD502 M133 81/2 CD93 M133 57∕8–81/2 CD93iL M133 61/4 CD93Li M133 81/2 CMP107 M133 121/4 CMP107FD M133 81/2–121/4 CMP107iL M133 81/2 CMP107UF M133 121/4 FC243 M133 33∕8 FC244 M133 81/2–121/4 FC244Li M133 61∕8–121/4 FC264 M133 6 FC266Li M133 81/2 FC274Li M133 55∕8 FC3447 M133 121/4 FC3643 M133 81/2 FC3645 M133 57∕8–6 FC3645i M133 57∕8 FC3647 M133 81/2–91/4 FC3735 M133 51/2 FC3737 M133 81/2 FC3943 M133 121/4 FCi264Li M133 61/4 GTE64H M133 81/2 M54 M133 121/4 MM24I M133 171/2 MM74 M133 141/2 MM62 M142 6 MMD63C M142 81/2 MMD63 M143 16 CD104B- M144 81/2 DiL GTD86Ds S122 171/2 S85 S122 28 SF56 S122 143/4 SF56M S122 143/4 SFD86 S122 171/2 SFD86H S122 171/2 SFG86 S122 171/2 FC3763A S123 81/2 FC3863A S123 121/4 GT55Cs S123 151/2 GT65Hs S123 171/2 S56 S123 16–171/2 S65 S123 143/4–181∕8 S66 S123 143/4–171/2 S75 S123 16–181∕8 S95 S123 26 SF46 S123 121/4 SF55 S123 143/4–171/2 SF56CH S123 16 SF56H S123 171/2 SF65 S123 121/4–171/2 SF65M S123 171/2 SF66 S123 171/2–26 SF66CH S123 171/2 SF66DH S123 121/4 SF66H S123 171/2–26 SF66M S123 171/2 SF75 S123 171/2 SF95DH S123 22 D519

3–5 ∕8 37∕8–57∕8 55∕8–121/4 61/2–83/4 77∕8–133/4 97∕8–171/2 57∕8–171/2 61/2–171/2 77∕8–171/2 97∕8–171/2 105∕8–171/2 105∕8–171/2 57∕8–121/4 61/2–143/4 77∕8–171/2 97∕8–171/2 151/2–171/2 151/2–36 20–36 20–36 20–36 5

IADC code

150–40 250–60 250–60 250–60 250–60

PDC drill bits Atlas Copco D013 D313 D513 DP316 DP516 DP616 M419 M519 M619 M719 M819 M919 S419 S519 S619 S719 S819 S919 S1119 S1319 S1519 Baker Hughes HC404 M123 HC405 M333 HC503 M123 HC504 M123 HC505 M223 HC603 M123 HC604 M123 HC605 M323 HCD404 M133 HCD405 M233 HCD504 M123 HCD505 M223 HCD603 M123 HCD604 M123 HCD605 M323 Q404 M133 Q405 M233 Q503 M123 Q504 M123 Q505 M223 Q604 M123 Q605 M323 QD404 M133 QD405 M123 QD504 M123 QD505 M323 QD604 M123 QD605 M323 T404S S133 T504F M123 T504S S123 T505S S123 T505 M223 T505F M223 T605 M323 T605F M323 TD404 M133 TD404F M133 TD504F M123 TD505 M323 TD505F M323 TD605 M323 TD605F M323 T505S S323 T505FS S323 T604FS S123 T605S S323 T605FS S323 TD505S S323 TD505FS S323 TD604 M123 TD604F M123 TD604FS S123 TD605S S323 TD605FS S323 TD804FS S123 Bit–Tech M131 DB Bits D316 M122 D413 M132

Manufacturer, Bit name/model number

1,000–2,000 1,000–4,000 1,000–4,500 1,000–4,500 1,000–4,500

9 121/4 81/2, 121/4 81/2, 121/4 83∕8, 81/2, 83/4, 97∕8, 115∕8, 12, 121/4 83∕8, 81/2, 83/4, 97∕8, 115∕8, 12, 121/4 83∕8, 81/2, 83/4, 97∕8, 115∕8, 12, 121/4 83∕8, 81/2, 83/4, 97∕8, 115∕8, 12, 121/4 16, 171/2 16, 171/2 16, 171/2 16, 171/2

Special features/ usage

412Y 417X 417X 427X 437X

Recommended rotary speed, rpm

HMX HMX BHMX

Recommended WOB, lb/in. diameter

1,000–5,000 300–50 1,000–5,000 300–50 1,000–5,000 300–50

Size range, in.

BGHMWX BGHMX BGHMWX BGHMWX BGHMWX BGHMWX BGHMWX HMX HMWX X X X X WX WX X WX X BGHMTX BGHMTWX BGHMTWX BGHMTWX BGHMTWX BGHMTWX BGHMTWX BGHMTX BGHMTWX BGHMTWX BGHMTWX BGHMTX HMX

IADC code

Special features/ usage

300–50 300–50 250–50 250–50 250–50 250–50 250–50 220–50 220–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 280–50 300–50 300–50 300–50 280–50 300–50

435X 435X 445X 445X 445X 445X 515X 445X 447X 415X 417X 435X 437X 437X 437X 445X 445X 447X 437T 415T 415T 415T 425T 435T 435T 437T 445T 435T 435T 445T 437X

Manufacturer, Bit name/model number

Recommended rotary speed, rpm

1,000–4,000 1,000–3,000 1,500–4,000 1,500–4,000 1,500–4,000 1,500–4,000 1,500–4,000 1,000–3,000 2,000–5,000 1,000–3,000 1,000–4,000 1,000–3,000 1,000–4,000 1,000–4,000 1,000–4,000 1,000–3,000 1,000–3,000 1,000–4,000 1,000–4,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–3,000 1,000–4,000 1,000–5,000

Size range, in.

Recommended WOB, lb/in. diameter

XR15 XR15T XRK15T TIX–TSK A05 M04GF M05GF M08GF M10GFP

22, 28 36 16 16 16 16, 171/2, 28 171/2 23 105∕8 171/2, 26 81/2, 97∕8, 121/4 171/2, 26 81/2, 121/4 81/2, 121/4 81/2 16, 171/2, 24, 26 121/4 81/2, 121/4 121/4 171/2 171/2 171/2, 181/2 22 171/2 171/2 121/4 24 171/2 16 26, 28 51/2, 55∕8, 6, 61∕8, 61/4, 63/4 447X 43/4, 55∕8, 53/4 447X 57∕8, 6, 61∕8, 61/2 447X 6

IADC code

Manufacturer, Bit name/model number GSI12UB GSI15 GSI15UB GSI16B GSI18 GSI18B GSI23B M15S MF15B SB415 SB417 SB435 SB437 SB437D SB437DD SB445 SB445D SB447 TCT12 TCTI01B TCTI03B TCTI03BD TCTI06B TCTI10B TCTI10BD TCTI11 TCTI18B TCTSI10B TCTSI12B TCTSI18B XR10T

250–2,500

60–350

DGHMVW

200–2,500 250–2,500 250–2,500

60–350 60–400 60–400

GHMIRSTUl GHMIRSTUl GHMIUl

500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 250–3,500 250–3,500 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,500

60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 50–150 50–150 60–400 60–400 60–400 60–400 60–400 60–400 60–400 50–350

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 250–3,500 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000

60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 50–150 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

DS416 DS419

750–5,500 750–5,500

SP49 DS508 DS511 DS513 DS516 SP56 DS519 SP59 DS611 DS613 SP63 DS616 SP66 DS619 SP69

1,000–6,000 Variable 1,000–6,000 Variable

Smith Bits HOX616 M223 83/4, 105∕8

500–4,000

60–400

HOXS616 M223 83/4, 105∕8

500–4,000

60–400

M419

M121 83/4

400–3,000

60–400

M513

M223 41/2, 6 ∕8

500–4,000

60–400

M516

M223 115∕8, 121/4

500–4,000

60–400

1

M519

M223 6, 121/4

400–3,000

60–400

M613

M333 51/2, 57∕8, 6, 61∕8

500–4,000

60–400

M616

M223 81/2, 91/4, 105∕8, 121/4 500–4,000

60–400

M619

121/4

400–3,000

60–400

M713

M333 5 ∕8, 6 ∕8

500–4,000

60–400

M716

M323 105∕8, 12, 16

500–4,000

60–400

M816

83∕8, 141/2, 16

500–4,000

60–400

M819 M916

7

1

91/4

400–3,000

60–400

M423 16

500–4,000

60–400

MA613

61∕8

500–4,000

60–400

MA616

M223 6, 61∕8, 81/2

500–4,000

60–400

MA619

M223 81/2, 181∕8

400–3,000

60–400

MA813

6

500–4,000

60–400

MA89

8 ∕8

500–4,000

60–400

MAI616

6

500–4,000

60–400

500–4,000

60–400

3

MASI513 M233 83/4 MASI613

83/4

500–4,000

60–400

MASI716

77∕8, 83/4

500–4,000

60–400

MASIZ513

83/4

500–4,000

60–400

MAX89

83∕8

500–4,000

60–400

GHMWUlRst GHMWUl GHMWUl GHMWUl GHMWUl

MAZ616

81/2

500–4,000

60–400

MAZ89

83∕8

500–4,000

60–400

121/4

500–4,000

60–400

Variable Variable

GHMWUl GHMWUl

MD519

M223 81/2

400–3,000

60–400

750–5,500 750–5,500

Variable Variable

MD616

M223 81/2, 121/4

500–4,000

60–400

GHMWUl

MD713

81/2

500–4,000

60–400

750–5,500

Variable

GHMWUl

MD716

12

500–4,000

60–400

750–5,500 750–5,500

Variable Variable

GHMWUl GHMWUl

MDA619

121/4

400–3,000

60–400

MDAI619

121/4

400–3,000

60–400

750–5,500 750–5,500

Variable Variable

MDI313

81/2, 83/4

500–4,000

60–400

GHMWUm

MDI319

81/2

400–3,000

60–400

750–5,500 750–5,500 750–5,500

Variable Variable Variable

MDI413

53/4, 6, 61∕8

500–4,000

60–400

GHMWUm GHMWUm

750–5,500 750–5,500

Variable Variable

GHMWUm

750–5,500 750–5,500

Variable Variable

GHMWUm

750–5,500

Variable

MCRIZ616

MDI416

M123 61∕8, 81/2, 83/4

500–4,000

60–400

MDI419

M121 81/2, 83/4, 121/4

400–3,000

60–400

MDI513

M233 57∕8, 6, 61∕8, 61/4, 61/2, 500–4,000 65∕8, 63/4, 77∕8, 81/2, 85∕8, 83/4 500–4,000 M223 57∕8, 6, 61∕8, 61/2, 63/4, 77∕8, 83∕8, 81/2, 85∕8, 83/4, 97∕8, 105∕8, 115∕8, 121/4

60–400

MDI516

60–400

GHMNUmVW GHMNUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW

MDI613

MDI616

MDI619 MDI713 MDI716

MDI813 MDI816 MDI916

M223 81/2, 10 ∕8, 111/2, 121/4, 141/2, 143/4, 16, 163∕8, 161/2, 171/2, 181∕8 M333 81/2, 121/4, 141/2, 143/4, 16, 161/2 M323 81/2, 121/4, 141/2, 171/2, 181∕8 171/2 5

400–3,000

60–400

GHMNRstUlVW

500–4,000

60–400

GHMNRstUmVW

500–4,000

60–400

GHMNRstUmVW

400–3,000

60–400

GHMNRstUlVW

500–4,000

60–400

500–4,000

60–400

GHMNRstUmVW GHMNRstUmVW

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

MDIR613

61∕8

MDIZ413

6

500–4,000

60–400

MDIZ513

61∕8, 81/2

500–4,000

60–400

MDIZ516

61∕8, 81/2, 83/4, 121/4

500–4,000

60–400

MDIZ519

81/2, 121/4

400–3,000

60–400

MDIZ613

1

6, 6 ∕8, 63/4, 83/4

500–4,000

60–400

MDIZ616

81/2, 121/4

500–4,000

60–400

MDIZ619

121/4

400–3,000

60–400

MDIZ713

81/2

500–4,000

60–400

MDIZ716

81/2, 121/4, 143/4

500–4,000

60–400

MDS616

143/4

500–4,000

60–400

MDS713

55∕8

500–4,000

60–400

MDSI413

63/4

Special features/ usage

Variable Variable Variable Variable Variable

Variable

Recommended rotary speed, rpm

750–5,500 750–5,500 750–5,500 750–5,500 750–5,500

750–5,500

1,000–6,000 Variable

M223 61∕8, 81/2, 83/4, 91/2, 97∕8, 103∕8, 121/4, 131/2, 143/4, 17, 171/2 M333 5, 51/4, 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 75∕8, 77∕8, 81/2, 85∕8, 83/4, 91/2, 97∕8, 115∕8 M323 6, 77∕8, 81/4, 83∕8, 81/2, 83/4, 91/4, 91/2, 97∕8, 101/2, 105∕8, 115∕8, 12, 121/4, 131/2, 141/2, 143/4, 16, 17, 171/2, 181/4 M223 81/2, 97∕8, 121/4, 131/2, 141/2, 143/4, 16, 163∕8, 161/2, 171/2 M333 55∕8, 57∕8, 6, 81/2

Recommended WOB, lb/in. diameter

81/2 6, 83∕8, 81/2 81/2 81/2 33/4, 37∕8, 43/4, 6, 61∕8, 61/4, 61/2 6, 61∕8, 63/4, 77∕8, 83/4 61∕8, 83/4, 115∕8, 121/4, 131/2, 151/2 81/2 31/2, 33/4, 37∕8, 41∕8, 41/4, 61∕8 4, 41∕8, 41/2, 47∕8, 6, 61∕8 61/4, 65∕8, 63/4, 75∕8 57∕8, 6, 61∕8, 63/4, 77∕8, 81/2, 83/4, 91/4, 91/2, 115∕8, 121/4 81/2, 115∕8, 121/4 77∕8, 81/2, 83/4, 91/2, 95∕8, 97∕8,115∕8, 121/4, 143/4, 151/2, 171/2 81/2, 105∕8, 121/4 35∕8, 43/4 53∕8, 57∕8, 6, 61∕8, 61/4, 61/2, 65∕8, 63/4, 71/2, 75∕8, 77∕8, 81/2, 83/4 71/2 61/2, 77∕8, 81/4, 81/2, 83/4, 91/4, 97∕8, 11, 115∕8, 121/4, 131∕8 81/2, 105∕8, 121/4 77∕8, 81/2, 83/4, 115∕8, 121/4, 143/4, 171/2 115∕8, 121/4

Variable

MDI519

Size range, in.

350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50

750–5,500

GHMWUmRst GHMWUmRst GHMWUmRst GHMWUmVRst GHMWUmVRst GHMWUmVRst

IADC code

500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500

TK51

M222, 61∕8, 81/2, 83/4 M223 M132 63/4

Variable

Manufacturer, Bit name/model number

41/2 55∕8, 63/4 77∕8, 81/2, 83/4 121/4 83/4 121/4 121/4 121/4 121/4 77∕8, 81/2, 83/4 83/4 77∕8 83/4 81/2

PLs313 M133 PLs416 M123 PLs519 M123 PLs519 M223 PLs519 M343 PLs519 M423 PLs622 M143 PLs622 M223 PLs622 M343 PLt519 M123 PLt519 M223 PLx416 M222 PLd519 M123 PLd416 M123 ReedHycalog Bits SK316 DS316 DS319 SK319 DS413

TK49

750–5,500

Special features/ usage

350–50

TK46

Recommended rotary speed, rpm

500–4,500

PL519

SK419

61∕8, 61/4, 63/4, 77∕8, 81/2, 83/4 47∕8, 55∕8, 53/4, 6, 61∕8, 61/4, 63/4, 77∕8, 97∕8 81/2, 82∕3, 105∕8, 115∕8, 121/4 S122 77∕8

Recommended WOB, lb/in. diameter

M123 77∕8

DGHMWUmV DGHMWUmV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIUmV GHMWIRstV GHMWIRstV

SK416

Size range, in.

350–50

SK413

IADC code

500–4,500

16 23 121/4 16 171/2 171/2 81/2 16 16 97∕8 24 24 26 26 26 121/4 20 121/4 81/2 77∕8 77∕8–105∕8 81/2 81/2 63/4–77∕8 121/4 181∕8 121/4 81/2 81/2 61/2 81/2 83/4 6–61/2 6–63/4 85∕8 63/4 61/2–63/4 63/4

Manufacturer, Bit name/model number

Recommended rotary speed, rpm

M123 55∕8

S123 S123 S123 S123 S123 S123 S123 S123 S123 S124 S124 S124 S124 S124 S124 S124 S124 S124 S133 S133 S133 S133 S133 S133 S133 S133 S133 S134 S134 S134 S134 S142 S142 S142 S142 S142 S143 S143

Special features/ usage

Recommended WOB, lb/in. diameter

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

Size range, in.

60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 50–150 50–150 60–400 60–400 60–400 60–400 60–400 50–150 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400

IADC code

Manufacturer, Bit name/model number

500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 250–3,500 250–3,500 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 250–3,500 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000

SFD66C SFD76H SFE55 SFE65 SFE65M SFE75H SFG55 SFG65 SFG86H FC3557A SF76 SF76H SF95 SF95DM SF95DM SFD46 SFD85 SFE36 FC3043A FC3543A FC3643A FC3743A FC3843A FC3943A S74 SD84D SF44 FC3449A FC3537A FC3847A GTE44s SF63 SFD53 SFD63 SFD63C SFD73 SFD53C SFD54C PDC Logic PL416

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

500–4,000

60–400

500–4,000

60–400

MDSI513

57∕8, 6, 61∕8, 63/4, 81/2 500–4,000

60–400

MDSI516

6, 61∕8, 63/4, 77∕8, 81/2, 85∕8, 83/4, 115∕8, 121/4 81/2, 83/4, 9, 91/2, 121/4, 143/4, 171/2 53/4, 57∕8, 6, 61∕8, 61/4, 63/4, 77∕8, 81/2, 83/4, 91/2, 97∕8, 105∕8, 121/4 77∕8, 83∕8, 81/2, 85∕8, 83/4, 91/4, 97∕8, 105∕8, 115∕8, 12, 121/4, 131∕8, 131/2, 141/2, 143/4, 16, 171/2, 181/2 81/2, 83/4, 121/4, 143/4

500–4,000

60–400

400–3,000

60–400

500–4,000

60–400

500–4,000

60–400

GHMNRstUmVW

400–3,000

60–400

500–4,000

60–400

GHMNRstUlVW GHMNRstUmVW

500–4,000

60–400

GHMNRstUmVW

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

MDSI416 M123 81/2, 97∕8, 121/4

MDSI519 M123 MDSI613 M333

MDSI616 M222

MDSI619 M223

53/4, 57∕8, 6, 61∕8, 7, 77∕8, 83∕8, 81/2, 85∕8, 83/4, 97∕8, 121/4 MDSI716 M223 83∕8, 81/2, 85∕8, 83/4, 91/2, 97∕8, 101/4, 103∕8, 105∕8, 115∕8, 121/4, 131∕8, 143/4, 16, 161/2, 171/2, 181∕8 MDSI813 M333 83∕8, 81/2, 83/4, 101/4, 105∕8, 121/4, 143/4 MDSI816 81/2, 97∕8, 115∕8, 121/4, 171/2, 181∕8, 181/2 MDSI913 81/2, 83/4

MDSI713

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

MDSI916

83/4

500–4,000

60–400

MDSIR513

65∕8

500–4,000

60–400

MDSIR516

63/4, 81/2, 121/4

500–4,000

60–400

MDSIR613

57∕8, 6, 61∕8, 61/4, 65∕8, 500–4,000 83/4, 131/2

60–400

GHMNRstUlVW GHMNRstUmVW

World Oil® / JANUARY 2017 D-7

500–4,000

60–400

MDSIZ516

500–4,000

60–400

MDSIZ519

6, 81/2, 85∕8, 83/4, 91/2, 121/4 81/2, 121/4, 143/4

400–3,000

60–400

MDSIZ613

1

53/4, 6, 6 ∕8, 81/2

500–4,000

60–400

MDSIZ616

500–4,000

60–400

MDSIZ619

83∕8, 81/2, 85∕8, 83/4, 121/4 121/4

400–3,000

60–400

MDSIZ713

57∕8, 81/2, 121/4

500–4,000

60–400

MDSIZ716

60–400

MDSIZ813

81/2, 91/2, 105∕8, 121/4, 500–4,000 123∕8 121/4 500–4,000

MDSIZ816

81/2, 121/4

500–4,000

60–400

MDSIZR816

121/4

500–4,000

60–400

MDSXI613

81/2

500–4,000

60–400

MDSXI616

121/4

500–4,000

60–400

MDSXI713

81/2

500–4,000

60–400

MDSXI716

121/4, 181∕8

500–4,000

60–400

MDSXI813

81/2

500–4,000

60–400

MDSXIZ713

81/2

500–4,000

60–400

MDSXIZ716

81/2

500–4,000

60–400

MDX516

81/2

500–4,000

60–400

MDX613

61∕8

500–4,000

60–400

MDXI616

121/4

500–4,000

60–400

MDXI713

81/2

500–4,000

60–400

MDZI513

61∕8

500–4,000

60–400

MDZI516

77∕8, 81/2, 83/4

500–4,000

60–400

MDZI613

6, 61∕8, 61/2, 83/4

500–4,000

60–400

MDZI616

77∕8, 81/2, 83/4, 141/2

500–4,000

60–400

MDZI713

83/4, 10 ∕8

500–4,000

60–400

MDZI716

121/4

500–4,000

60–400

MDZI813

83/4

500–4,000

60–400

MDZIR813

83∕8

500–4,000

60–400

MDZIZ513

6

500–4,000

60–400

MDZIZ616

81/2, 85∕8

500–4,000

60–400

MDZIZ716

115∕8, 121/4

500–4,000

60–400

MDZSI513

6

500–4,000

60–400

MDZSI813

81/2, 85∕8

500–4,000

60–400

MDZSI816

121/4

500–4,000

60–400

MDZXI713

81/2

500–4,000

60–400

MDZXIZ713

81/2, 105∕8

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

M123 61∕8

500–4,000

60–400

MI513

M223 43∕8, 61∕8, 61/4

500–4,000

60–400

MI516

M123 6, 61∕8, 61/4, 61/2, 71/2, 500–4,000 77∕8, 81/2, 83/4, 121/4 M123 61∕8, 77∕8, 81/2, 83/4, 400–3,000 97∕8, 121/4

60–400

MI316 MI413 MI416

MI519

IADC code

5

M123 83∕8, 81/2 61∕8, 61/4, 61/2

D-8 2017 Drill Bit Classifier

60–400

60–400

MI716 MI813 MI913 MI916 MIR616 MIR916 MIZ516 MIZ613

121/4

400–3,000

60–400

M223 53∕8, 57∕8, 6, 77∕8, 81/2, 500–4,000 97∕8, 121/4, 143/4 M333 61/2, 81/2, 85∕8, 121/4 500–4,000

60–400

M433 81/2, 85∕8, 115∕8 16

500–4,000 500–4,000

61/4

500–4,000

16

500–4,000

83/4

500–4,000

61/2

500–4,000

60–400 60–400 60–400 60–400 60–400 60–400 60–400

MIZ616

121/4, 16

500–4,000

60–400

MIZ716

81/2

500–4,000

60–400

MIZ813 MR613

85∕8

500–4,000

57∕8

500–4,000

60–400 60–400

MS413

61∕8

500–4,000

60–400

MS419

83/4, 143/4

400–3,000

60–400

MS516

81/2

500–4,000

60–400

MS519

161/2

400–3,000

60–400

MS613

5 ∕8

500–4,000

60–400

7

MS616

83∕8, 81/2, 121/4, 16

500–4,000

60–400

MS713

57∕8, 121/4

500–4,000

60–400

MS816

83∕8

500–4,000

60–400

MSI413

6, 63/4

500–4,000

60–400

MSI416

M221 61∕8, 63/4, 77∕8, 83/4

500–4,000

60–400

MSI513

M333 61∕8, 61/4, 83/4

500–4,000

60–400

MSI516 MSI519 MSI613 MSI616

MSI619 MSI713 MSI716 MSI719 MSI813 MSI816 MSI916

M323 61∕8, 61/2, 77∕8, 81/2, 83/4, 91/2, 97∕8, 105∕8, 121/4 M223 77∕8, 81/2, 83/4, 97∕8, 121/4 M433 6, 61∕8, 61/4, 61/2, 65∕8, 63/4, 77∕8, 81/2, 83/4, 121/4 M433 6, 61∕8, 77∕8, 81/2, 83/4, 91/2, 97∕8, 105∕8, 121/4, 131∕8, 131/2, 16, 161/2, 171/2 77∕8, 83∕8, 81/2, 83/4, 121/4, 171/2 M433 6, 61∕8, 61/4, 61/2, 63/4, 81/2, 83/4, 97∕8, 105∕8, 121/4 M433 71/2, 77∕8, 83∕8, 81/2, 83/4, 97∕8, 121/4, 16, 171/2 83/4, 121/4 M433 6, 6 ∕8, 81/2, 83/4, 97∕8, 121/4 M432 83∕8, 81/2, 97∕8, 121/4, 16 16 1

MSIR513

6 ∕8

MSIR613

6, 6 ∕8, 61/4, 61/2

500–4,000 400–3,000

60–400

500–4,000

60–400

500–4,000

60–400

400–3,000

60–400

500–4,000

60–400

500–4,000

60–400

400–3,000

1

60–400

500–4,000

60–400

500–4,000

60–400

500–4,000 500–4,000

1

60–400

500–4,000

60–400 60–400 60–400

MSIR616

97∕8

500–4,000

60–400

MSIR713

61∕8, 81/2

500–4,000

60–400

MSIZ413

63/4

500–4,000

60–400

MSIZ513

61/4

500–4,000

60–400

MSIZ516

81/2, 83/4

500–4,000

60–400

GHMNRstUlVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

400–3,000

60–400

61∕8, 63/4

500–4,000

60–400

MSIZ616

81/2, 83/4, 121/4, 16

500–4,000

60–400

MSIZ619

121/4

400–3,000

60–400

MSIZ713

81/2

500–4,000

60–400

MSIZ716

81/2, 12, 121/4

500–4,000

60–400

MSIZ813

81/2, 83/4

500–4,000

60–400

MSIZ816

16

500–4,000

60–400

MST913

5 ∕8, 8 ∕8, 81/2

500–4,000

60–400

MSXI613

6, 81/2

500–4,000

60–400

MSXI616

81/2

500–4,000

60–400

MSXI619

121/4

400–3,000

60–400

MSXI713

6

500–4,000

60–400

MSXI716

81/2, 121/4

500–4,000

60–400

MSXIZ616

81/2

500–4,000

60–400

MSZ713

57∕8

500–4,000

60–400

MSZ716

12

500–4,000

60–400

MSZIZ813

81/2

500–4,000

60–400

MV616

61/4

500–4,000

60–400

MV716

M323 83/4

500–4,000

60–400

7

3

MZ616

81/2, 121/4, 16

500–4,000

60–400

MZ713

57∕8

500–4,000

60–400

MZ716

12

500–4,000

60–400

MZI616

97∕8, 105∕8, 121/4

500–4,000

60–400

MZI619

83/4

400–3,000

60–400

MZI716

97∕8, 16, 171/2

500–4,000

60–400

MZI813

81/2

500–4,000

60–400

MZIR813

81/2

500–4,000

60–400

MZIZ519

121/4

400–3,000

60–400

MZR813

83∕8

500–4,000

60–400

MZSI613

77∕8

500–4,000

60–400

MZSI716

81/2

500–4,000

60–400

MZXIR813

81/2

500–4,000

60–400

GHMNRstUlVW GHMNRstUmVW

R513

61∕8, 63/4

500–4,000

60–400

R516

61∕8, 61/4, 81/2, 83/4, 91/2 6, 61∕8, 61/4, 83/4

500–4,000

60–400

GHMNRstUmVW

R616

GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW

GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

R613

500–4,000

60–400

500–4,000

60–400

R713

61/4, 81/2, 83/4, 97∕8, 131/2 63/4

500–4,000

60–400

R716

61∕8, 65∕8, 85∕8, 121/4

500–4,000

60–400

R813

81/2, 83/4, 143/4

500–4,000

60–400

R816

81/2, 8 ∕8, 9 ∕8, 10 ∕8, 500–4,000 143/4 33/4 500–4,000

60–400

S413

5

7

5

60–400

S516

S123 17

500–4,000

60–400

S519

S123 81/2, 91/2, 101/2, 105∕8, 400–3,000 121/4, 131/2, 143/4, 17, 171/2, 24 S223 17 400–3,000

60–400

S619

60–400

S919

22

500–4,000

60–400

SD516

115∕8

500–4,000

60–400

SDAI513

81/2

500–4,000

60–400

Special features/ usage

60–400

57∕8, 61∕8

MI622

60–400

Recommended rotary speed, rpm

MDSIR816 MDSIZ513

MI619

Recommended WOB, lb/in. diameter

60–400

81/2, 83/4, 121/4

MSIZ613

Size range, in.

60–400

MSIZ519

IADC code

500–4,000

81/2, 85∕8, 83/4, 105∕8, 500–4,000 121/4, 143/4 500–4,000 97∕8, 181/2

GHMNRstUmVW GHMNRstUmVW

Manufacturer, Bit name/model number

61∕8

MDSIR813

60–400 60–400

Special features/ usage

MDSIR716

MI616

M233 6, 61∕8, 61/4, 65∕8, 63/4, 500–4,000 77∕8, 83/4, 121/4 M323 61/4, 77∕8, 81/2, 83/4, 500–4,000 97∕8, 105∕8, 11, 121/4, 131∕8, 131/2 400–3,000 M223 11, 121/4, 17

Recommended rotary speed, rpm

60–400

Recommended WOB, lb/in. diameter

500–4,000

Size range, in.

6, 6 ∕8, 63/4, 81/2

MI613

IADC code

MDSIR713

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW

Manufacturer, Bit name/model number

Recommended rotary speed, rpm 60–400

1

Special features/ usage

Recommended WOB, lb/in. diameter 500–4,000

Size range, in. 81/2, 83/4

Manufacturer, Bit name/model number MDSIR616

GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW DGHMNRstUmVW DGHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

60–400

500–4,000

60–400

S223 81/2, 83/4, 121/4, 131/2, 143/4, 16, 171/2, 181/2 121/4, 131/2, 143/4, 16, 171/2 81/2, 161/2, 171/2, 181∕8 171/2, 181∕8, 26

SDI516 SDI519 SDI613 SDI616 SDI619 SDI716 SDI816 SDIZ419 SDIZ513 SDIZ516

IADC code 121/4

61∕8, 81/2 81/2

400–3,000

60–400

GHMNRstUlVW

500–4,000

60–400

500–4,000

60–400

GHMNRstUmVW GHMNRstUmVW

400–3,000 500–4,000

60–400 60–400

500–4,000

60–400

400–3,000

60–400

500–4,000 500–4,000

60–400 60–400

SDIZ519

121/4, 143/4

400–3,000

60–400

SDIZ619

81/2

400–3,000

60–400

SDSI413

81/2

500–4,000

60–400

500–4,000

60–400

400–3,000

60–400

500–4,000

60–400

500–4,000

60–400

SDSI619

81/2, 115∕8, 121/4, 131/2, 16 121/4

400–3,000

60–400

SDSI713

81/2

500–4,000

60–400

SDSI716

121/4, 171/2, 195∕8

500–4,000

60–400

SDSI516 SDSI519 SDSI613 SDSI616

6, 81/2, 83/4, 115∕8, 121/4 S423 81/2, 121/4, 143/4, 16, 171/2 61∕8

SDSIZ616

121/4

500–4,000

60–400

SDSXI619

121/4

400–3,000

60–400

SDXI516

81/2

400–3,000

60–400

SDXI519

81/2, 171/2

400–3,000

60–400

SDXIZ513

81/2

500–4,000

60–400

SDZIZ616

171/2

500–4,000

60–400

SHOI513

71/2

500–4,000

60–400

SI416

61∕8, 81/2

500–4,000

60–400

SI419

61∕8, 81/2, 83/4

400–3,000

60–400

SI516

71/2, 91/2, 105∕8, 115∕8, 121/4, 131∕8 S123 81/2, 97∕8, 121/4, 141/2, 151/2, 20 77∕8, 81/2, 105∕8, 121/4, 133/4, 16 S223 121/4, 131/2, 171/2

500–4,000

60–400

400–3,000

60–400

500–4,000

60–400

400–3,000

60–400

SI519 SI616 SI619 SI819

181/2, 23

400–3,000

60–400

SI913

16

500–4,000

60–400

SI916

83/4, 121/4, 24

500–4,000

60–400

SI919

22

400–3,000

60–400

SIZ516

83/4

500–4,000

60–400

SIZ616

81/2

500–4,000

60–400

SIZ716

121/4

500–4,000

60–400

SPSI616

171/2

500–4,000

60–400

SSI513

61∕8

500–4,000

60–400

GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUlVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

500–4,000

60–400

SSI619

171/2, 20, 23, 24, 26 400–3,000

60–400

SSI716

121/4, 171/2

500–4,000

60–400

SSI819

20

400–3,000

60–400

SSI916

22

500–4,000

60–400

SSIZ516

121/4

500–4,000

60–400

SSIZ616

16

500–4,000

60–400

SST1213

121/4

500–4,000

60–400

SST913

81/2

500–4,000

60–400

SSXI616

121/4

500–4,000

60–400

SSXI619

121/4

400–3,000

60–400

SXI616

81/2, 121/4

500–4,000

60–400

SXI619

121/4

400–3,000

60–400

SXIZ616

81/2

500–4,000

60–400

SZI516

131∕8

500–4,000

60–400

TBRS613

500–4,000

60–400

VIS416

57∕8, 6, 61∕8, 63/4, 77∕8, 83∕8, 81/2, 83/4, 97∕8, 105∕8 81/2

500–4,000

60–400

VIS419

81/2, 121/4

400–3,000

60–400

VIS516

81/2, 121/4

500–4,000

60–400

VIS519

81/2, 121/4

400–3,000

60–400

VIS613

85∕8

500–4,000

60–400

X516

6, 61∕8, 77∕8, 81/2, 83/4 500–4,000

60–400

X616

81/2, 121/4, 171/2

60–400

X716

121/4, 161/2

500–4,000

60–400

XS516

97∕8

500–4,000

60–400

XS616

81/2, 85∕8, 83/4, 12, 121/4 121/4

500–4,000

60–400

XS716

500–4,000

60–400

XZ616

85∕8, 171/2

500–4,000

60–400

Z316

77∕8

500–4,000

60–400

Z319

81/2, 83/4, 16

400–3,000

60–400

Z416

6, 81/2

500–4,000

60–400

Z5

81/2

500–4,000

60–400

Z513

5 ∕8, 6, 6 ∕8, 63/4

500–4,000

60–400

Z516

57∕8, 6, 77∕8, 81/2, 83/4, 500–4,000 115∕8, 121/4 77∕8, 81/2, 121/4 400–3,000

60–400

Z519 Z6 Z613 Z616

Z619 Z713 Z716 Z8

7

1

6, 61∕8, 61/4, 77∕8, 81/2, 83/4 53∕8, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 77∕8, 81/2, 83/4 77∕8, 81/2, 85∕8, 83/4, 91/2, 105∕8, 121/4, 141/2, 16, 171/2, 181∕8 83/4, 97∕8, 121/4, 143/4, 23 83∕8, 81/2, 83/4, 105∕8, 171/2 81/2, 91/2, 97∕8, 121/4, 131∕8, 16, 171/2 81/2, 121/4

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

GHMNRstUmVW

500–4,000

60–400

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400 60–400

Z916

81/2, 85∕8, 83/4, 121/4, 500–4,000 171/2 81/2, 115∕8, 121/4, 500–4,000 171/2 500–4,000 83/4

60–400

ZR616

81/2, 83/4

60–400

Z813 Z816

GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW

500–4,000

60–400

ZR713

83∕8

500–4,000

60–400

ZR813

83∕8, 81/2

500–4,000

60–400

ZR816

105∕8, 121/4

500–4,000

60–400

Tri–Max Q–2 S–1 S–1S Ulterra U313M U313M CF U313M U313M CF U316M U316M CF U316M U316M CF U413M U413M CF U413M U413M CF U416M U416M CF U416M U416M CF U513M U513M CF U513M U513M CF U516M U516M CF U516M U516M CF U313S CF U313S FB U313S CF U313S FB U316S CF U316S FB U316S CF U316S FB U413S CF U413S FB U413S CF U413S FB U416S CF U416S FB U416S CF U416S FB U513S CF U513S FB U513S CF U513S FB U516S CF U516S FB U516S CF U516S FB Varel V316

Special features/ usage

500–4,000

121/4, 151/2, 171/2

Recommended rotary speed, rpm

6, 61∕8, 61/4, 61/2, 63/4, 77∕8, 81/2, 85∕8, 83/4 6, 61∕8, 63/4, 77∕8, 81/2, 85∕8, 83/4, 97∕8, 115∕8, 121/4, 171/2 S123 81/2, 83/4, 121/4, 151/2, 16, 161/2, 17, 171/2, 181/2 6, 61∕8, 63/4, 81/2, 83/4

SDI513

SSI616

GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

Recommended WOB, lb/in. diameter

60–400

60–400

Size range, in.

60–400

400–3,000

500–4,000

IADC code

500–4,000

81/2, 121/4, 171/2

97∕8, 121/4

Manufacturer, Bit name/model number

61∕8, 77∕8

SDI419

SSI516

Special features/ usage

SDI416

Recommended rotary speed, rpm

60–400

Recommended WOB, lb/in. diameter

500–4,000

Size range, in.

6 ∕8

IADC code

SDI413

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW

Manufacturer, Bit name/model number

Recommended rotary speed, rpm 60–400

1

Special features/ usage

Recommended WOB, lb/in. diameter 500–4,000

Size range, in. 81/2, 83/4

Manufacturer, Bit name/model number SDI313

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

S644 81/2–171/2 S315 6–171/2 S315 6–171/2

1,000–2,000 80–200 1,000–3,000 80–200 1,000–2,000 80–200

DGM DGM DGM

M132 M132 M133 M133 M122 M122 M123 M123 M132 M132 M133 M133 M122 M122 M123 M123 M132 M132 M133 M133 M122 M122 M123 M123 S132 S132 S133 S133 S122 S122 S123 S123 S132 S132 S133 S133 S122 S122 S123 S123 S132 S132 S133 S133 S122 S122 S123 S123

300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500 300–2,500

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU

M223, 61/4, 61/2, 63/4, S223 77∕8, 81/2

500–2,500

50–400

V319

M233, 77∕8, 81/2, 121/4 S233

500–2,500

50–400

V416

M233, 41∕8, 55∕8, 6, 61∕8, 500–2,500 S233 61/4, 61/2, 75∕8, 77∕8, 81/2, 85∕8, 97∕8, 121/4, 16, 171/2 500–2,500 M123, 6, 71/2, 77∕8, 81/2, S123 85∕8, 83/4, 97∕8, 105∕8, 115∕8, 121/4, 17, 171/2 500–2,500 M223, 61/4, 61/2, 63/4, S223 77∕8, 81/2

50–400

BGTPDG– 1G2G3– LHNOUXR BGTPDG– 1G2G3– LHNOUXR BGTPDG– 1G2G3– LHNOUXR

V419

R316

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

50–400

BGTPDG– 1G2G3– LHNOUXR

50–400

BGTPDG– 1G2G3– LHNOUXR BGTPDG– 1G2G3– LHNOUXR BGTPDG– 1G2G3– LHNOUXR

R319

M223, 77∕8, 81/2, 121/4 S223 

500–2,500

50–400

R416

500–2,500 M223, 41∕8, 55∕8, 6, 61∕8, S223  61/4, 61/2, 75∕8, 77∕8, 5 7 81/2, 8 ∕8, 9 ∕8, 121/4, 16, 171/2 500–2,500 M223, 6, 71/2, 77∕8, 81/2, S223   85∕8, 83/4, 97∕8, 5 5 10 ∕8, 11 ∕8, 121/4, 17, 171/2

50–400

R419

50–400

BGTPDG– 1G2G3– LHNOUXR

World Oil® / JANUARY 2017 D-9

4 ∕8×6, 6×71/4, 81/2×97∕8, 105∕8×123/4, 121/4×143/4, 143/4×171/2, 171/2x23 Bi–center PDC drill bits

Underream while drilling

3

Atlas Copco S419BCRU ReedHycalog Bits CSD3211 CSD3311 CSD4208 E4313 PSD3211 PSD3213 PSD3311 PSD4208 PSD4213

400–4,000

60–400

43/4×5 ∕8 43/4×53∕8 41∕8×41/2 6×7 41/2×53∕8, 6×7 53/4×61/2 43/4×5, 43/4×53∕8 41∕8×47∕8 61/2×71/2, 61/2×8, 85∕8×95∕8, 121/4×143/4 PSD4216 97∕8×113/4 PSD4311 61∕8×71∕8, 61/2×71/2 PSD4313 6×63/4, 81/2×91/2, 97∕8×103/4 PSD4316 81/2×91/2, 105∕8×121/4, 121/4×131/2 PSD4413 81∕8×91/4 SBR4213 S422 6×7 SBR4219 S422 101/4×12, 103∕8×121/4 Smith Bits QDM4213 7

3,000–15,000 3,000–15,000 3,000–15,000 3,000–18,000 3,000–15,000 3,000–18,000 3,000–15,000 3,000–12,000 Size Dependent

80–200 80–200 80–200 80–200 80–200 80–200 80–200 80–200 80–200

GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm

3,000–30,000 3,000–18,000 Size Dependent Size Dependent

80–200 80–200 80–200

GHMWUm GHMWUm GHMWUm

80–200

GHMWUm

3,000–22,500 80–200 3,000–3,500 80–200 2,500–3,000 80–200

GHMWUm GHMWUm GHMWUm

200–3,500

60–400

QDM7313

7

9 ∕8

200–3,500

60–400

QDM7413

91/2

200–3,500

60–400

QDMI4213

71/2

200–3,500

60–400

QDMI5216

7

200–3,000

60–400

QDMI5219

131∕8

200–3,000

60–400

QDMSI4216

91/2

200–3,000

60–400

QDS4213

7

200–3,500

60–400

QDS5216

97∕8, 113/4, 121/4

200–3,000

60–400

QDS7313 S333 131/2

200–3,500

60–400

QDSI4219

91/2

200–3,000

60–400

QDSI5216

113/4, 143/4, 171/2

200–3,000

60–400

QDSI5316

91/2

200–3,000

60–400

QDSI6213

61/4

200–3,500

60–400

SHO716

16, 163∕8, 161/2

200–3,000

60–400

SHOI516

171/2

200–3,000

60–400

SHOI616

105∕8, 143/4, 16

200–3,000

60–400

SHOS616

171/2, 18

200–3,000

60–400

SHOSI616

121/4, 171/2

200–3,000

60–400

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNUmVW GHMNUmVW GHMNUmVW GHMNUmVW GHMNUmVW

Varel VH416 VH616

VH619

71/4×91/2 5

M323, 81/2×97∕8 500–2,500 S323 7 M323, 6×7, 81/2×9 ∕8, 500–2,500 S323 103∕8×121/4, 105∕8×121/4, 121/4×143/4, 131/2×171/2, 141/2×16 M323, 81/2×97∕8, 121/4×143/4 500–2,500 S323 PDC coring bits

Bit–Tech 300–2,000 CP–440E M342 77∕8, 81∕2, 83∕4 Dowdco Coring C4–FD S–x41 81/2×4 300–2,000 CP–613 M–131 6×25∕8, 61∕8×25∕8, 300–2,000 61/2×31/2, 63/4×31/2, 727∕32×31/2, 727∕32×4, 81/2×4, 83/4×4

D-10 2017 Drill Bit Classifier

100–400 BGDHNOUXR 100–400 BGDHNOUXR

100–400 BGDHNOUXR

60–120

AFG

40–75 50–150

FGMRUl FGMRUl

Halliburton FC3443 M243 FC3445A S243 FC3543A S333 FC3636 M434 FC3643 M233 FC3645 M233 FC3645A S233 FC3647 M233 FC3647A S233 FC3653 M233 FC3657 M233 FC3663 M233 FC3847 M233 FC3943A S234 ReedHycalog Bits CSP313 S132 CCP513 S132, S233 CD453 CDP519 S323 CEP513 S232, S233 CN455 CSP516 S222 IEP513 Varel CB413 M132 CB613 M232 CB419 M122

81/2–121/4 51/2–63/4 71/2–81/2 43/4 71/2 –121/4 51/2–63/4 51/2–63/4 6–121/4 6–121/4 6–121/4 6–121/4 6–121/4 6–121/4 6–121/4

250–3,500 250–2,000 250–3,500 200–1,500 250–3,500 250–2,000 250–2,000 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500

50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150

F F F F F F F F F F F F F F

61∕4 61∕2, 63∕4, 83∕4, 97∕8

300–2,000 300–2,000

50–150 50–150

GUl GUl

55∕8, 6, 61∕4, 81∕2 121∕4 81∕2, 83∕4, 83∕4

300–2,000 300–2,000 300–2,000

50–150 50–150 50–150

GUl GUl GUl

6, 61∕4 81∕2 3, 31∕2

300–2,000 300–2,000 300–2,000

50–150 50–150 50–150

GUl GUl GUl

81∕2 100–2,000 60–120 77∕8, 81∕2 1,000–3,000 50–400 1 8 ∕2 100–2,000 60–120 Surface set diamond coring bits

Bit–Tech CN321BL M613 61∕8 Halliburton CT103UF M423 81∕2 Varel CN300 M713 81/2

DGNU DGNU DGNU

300–2,000

60–120

AGMR

250–3,500

50–150

FI

100–1,500

60–150

G

Soft–Medium Steel tooth roller cone bits

Baker Hughes RC124 124 VM–2 125 RC126 126 RC127 127 VG–2DO 127 RC131 131 GTX–G3 135 RC135 135 VG–3 135 VG–3DO 137 VGD–3 135 VM–3 135 RC136 136 MX–3 137 MXL–3 137 RC137 137 STX–3 137 VGD–3 137 VM–3 137 VMD–3 137 Halliburton A3T 211 QHN4 211 A4R 215 XT4 215 XT4GR 215 XT4GS 215 XT4R 215 XT4S 215 XTK4 215 A4 216 QH4R 216 QHK4 216 QHK4S 216 A4GR 217 EQH4GS 217 QH4 217 QH4GR 217 QH4S 217 QHA4GR 217 QHA4GSR 217 QHA4G- 217 SRCH QHK4G 217 QHK4GS 217 SR2R 217

81/2 171/2 81/2 81/2, 121/4 41/2, 45∕8 28 83∕8, 81/2, 115∕8, 12, 121/4, 143/4, 151/2, 171/2, 181/2 115∕8, 171/2 171/2 45∕8 143/4 16, 171/2 121/4 81/2, 121/4 115∕8 41∕8, 81/2, 121/4 35∕8, 33/4, 37∕8 121/4 81/2, 97∕8, 121/4, 131/2 81/2, 121/4, 131/2

1,900–5,100 1,400–3,500 1,900–5,100 1,600–5,100 1,300–3,300 1,600–4,500 1,800–5,700

215–80 350–80 215–80 215–70 300–80 125–25 195–60

S BCGMSW S S BCGSW S CGS

1,800–5,700 1,800–4,500 1,800–4,500 1,800–4,500 1,600–4,100 2,200–5,700 2,400–5,600 2,400–5,600 2,200–5,700 1,300–4,000 2,200–5,700 2,400–5,600 2,400–5,600

195–60 125–60 125–61 125–60 350–80 195–80 350–80 350–80 195–80 285–80 195–80 350–80 350–80

S SW BCGSW MSW BCGMSW S BGMX BGMX S MS SW BCGMSW BCGMSW

41∕8–45∕8 121/4 143/4 171/2 161/2 141/4–171/2 141/2 20 151/2 121/4 43/4 83/4 121/4 81/2 91/2 41/2–121/4 81/2–121/4 73∕8–11 81/2 6–61/2 91/4

2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000

60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300

GMXW GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXW GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXW GMXWC

81/2–83/4 121/4 63/4

2,000–6,000 60–300 2,000–6,000 60–300 2,000–6,000 60–300

GMXWC GMXWC GMXW

Kingdream GA214 214 GA215

215

GAT214 GAT215 HA216

214 215 216

HA217

217

HAT217

217

57∕8, 61∕8, 83∕8, 81∕2, 103∕8, 101∕2, 115∕8, 12, 121∕4, 17, 171∕2 57∕8, 61∕8, 61∕2, 81∕2, 103∕8, 115∕8, 121∕4, 135∕8, 17, 171∕2 121∕4 121∕4 37∕8, 4, 41∕8, 41∕2, 45∕8, 43∕4, 51∕2, 57∕8, 6, 61∕8, 71∕2, 77∕8, 83∕8, 83∕4 33∕4, 37∕8, 41∕8, 41∕4, 43∕8, 41∕2, 45∕8, 51∕2, 55∕8, 57∕8, 6, 61∕8, 61∕4, 61∕2, 71∕2, 77∕8, 83∕8, 81∕2, 83∕4, 97∕8, 101∕4, 105∕8, 115∕8, 121∕4, 171∕2 57∕8, 6, 61∕8, 61∕4, 61∕2, 83∕8, 81∕2, 83∕4, 97∕8, 105∕8, 121∕4 171∕2 61∕8

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

PDC Reaming/Enlarge While Drilling Tri–Max EWD

1,000–4,000 200–80

CGL

1,000–4,000 200–80

CG

1,000–4,000 200–80 1,500–4,000 200–80 2,500–6,000 90–50

CG GL

2,500–6,000 100–50

CGL

2,500–6,000 100–50

CG

1,500–4,000 W211 211 W221 221 1,000–4,000 ReedHycalog Bits RT4 217 6, 61∕8 1,000–3,000 S21 217 6, 61∕8, 71/2, 81/2, 1,000–5,000 105∕8, 115∕8, 121/4, 125∕8 Rubicon G210 211 41∕8, 4½, 45∕8, 4¾, 3,000–9,000 47∕8, 55∕8, 57∕8, 6, 61∕8, 6¼, 6¾, 77∕8, 83∕8, 8½, 85∕8, 8¾, 95∕8, 97∕8, 105∕8, 12, 12¼, 13¾, 14, 14¾, 15, 16, 17, 17½ G210H 213 41∕8, 4½, 45∕8, 4¾, 3,000–9,000 47∕8, 55∕8, 57∕8, 6, 61∕8, 6¼, 6¾, 77∕8, 83∕8, 8½, 85∕8, 8¾, 95∕8, 97∕8, 105∕8, 12, 12¼, 13¾, 14, 14¾, 15, 16, 17, 17½ G21F 216 6, 6¼, 77∕8, 83∕8, 8½, 3,000–8,000 8¾, 97∕8,12¼ G21FH 217 6, 6¼, 77∕8, 83∕8, 8½, 3,000–8,000 8¾, 97∕8,12¼ G21S 214 6, 6¼, 6¾, 77∕8, 83∕8, 3,000–8,000 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ G21SH 215 6, 6¼, 6¾, 77∕8, 83∕8, 3,000–8,000 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ G230 231 41∕8, 4½, 45∕8, 4¾, 3,000–9,000 47∕8, 55∕8, 57∕8, 6, 61∕8, 6¼, 6¾, 77∕8, 83∕8, 8½, 85∕8, 8¾, 95∕8, 97∕8, 105∕8, 12, 12¼, 13¾, 14, 14¾, 15, 16, 17, 17½ G230H 233 41∕8, 4½, 45∕8, 4¾, 3,000–9,000 47∕8, 55∕8, 57∕8, 6, 61∕8, 6¼, 6¾, 77∕8, 83∕8, 8½, 85∕8, 8¾, 95∕8, 97∕8, 105∕8, 12, 12¼, 13¾, 14, 14¾, 15, 16, 17, 17½ G23S 234 6, 6¼, 6¾, 77∕8, 83∕8, 3,000–9,000 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ G23SH 235 6, 6¼, 6¾, 77∕8, 83∕8, 3,000–9,000 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ G33F 236 6, 6¼, 77∕8, 83∕8, 8½, 3,000–8,000 8¾, 97∕8,12¼ G33FH 237 6, 6¼, 77∕8, 83∕8, 8½, 3,000–8,000 8¾, 97∕8,12¼ P21SH 215 63/4, 77∕8, 81/2, 83/4, 3,000–8,000 97∕8, 105∕8, 121/4, 131/2, 133/4, 143/4, 16, 17, 171/2 1,000–3,000 P21F 216 35∕8, 37∕8, 41/2, 45∕8, 43/4 P21FH 217 63/4, 77∕8, 81/2, 83/4, 3,000–8,000 97∕8, 121/4 P23SH 235 63/4, 77∕8, 81/2, 83/4, 3,000–8,000 97∕8, 105∕8, 121/4, 131/2, 133/4, 143/4, 16, 17, 171/2 P23FH 237 63/4, 77∕8, 81/2, 83/4, 3,000–8,000 97∕8, 105∕8, 12, 121/4

200–80 260–60 200–60 200–60

GMW CGS

50–90

50–90

G

50–80 50–80

GW

50–120

SG

50–120

SG

50–80

50–80

G

50–90

S

50–90

SG

50–80 50–80

GW

50–275

CWG

50–330 50–275

WG

50–275

CWG

50–275

WG

216

TIX–TSK MSS

215

MSS

131

MSS

131

MSS–TMZ 135 MSS–TMG MSS–TX MSS–TX MSS–TZ

137 137 137 135

MSS–X MSS–X

136 136

MSS–X MSS–XZ MSS–XZ MSS–Z

136 134 134 134

MSS–Z

134

E131

121 124 125 126 131 134 135 136 137

83∕8, 81/2, 121/4, 143/4, 171/2 83∕8, 81/2, 85∕8, 83/4, 95∕8, 97∕8, 105∕8, 11, 115∕8, 12, 121/4 133∕8, 133/4, 143/4, 15, 16, 171/2, 20, 22, 23, 24, 26 16, 171/2, 20, 22, 23, 24, 26 81/2, 97∕8, 115∕8, 121/4 57∕8, 6, 77∕8 81/2, 97∕8, 115∕8, 121/4 83∕8, 81/2, 95∕8, 97∕8, 105∕8, 115∕8, 121/4 57∕8, 6, 61∕8, 61/4, 77∕8 83∕8, 81/2, 83/4, 95∕8, 97∕8, 105∕8, 115∕8, 12, 121/4 151/2, 16, 171/2 81/2, 121/4 16, 171/2 83∕8, 81/2, 95∕8, 97∕8, 105∕8, 115∕8, 121/4 16, 171/2, 20, 22, 23, 24, 26

S BGHM S S

160–50 300–50 160–50 160–50

2,000–4,000 160–50

S

2,000–4,000 160–50

S

1,500–5,000 130–60

S

1,500–4,000 130–60

S

1,500–3,500 250–60

GMW

2,000–5,000 2,000–4,000 2,000–5,000 2,000–4,500

GMW S S S

250–60 120–60 120–60 120–60

2,000–4,000 120–60 2,000–5,000 120–60

S S

2,000–4,000 1,500–4,500 1,500–3,500 2,000–4,500

S GMW W S

120–60 250–60 150–60 110–60

1,500–3,500 110–60

S

80–150 80–150 80–150 80–150 80–150 80–150 80–150 80–150 80–150

B

135S 151/2, 16, 17, 171/2 1,250–5,500 136S 83∕8, 115∕8 2,000–5,000 137S 57∕8, 6, 81/4, 83∕8, 81/2, 2,000–5,000 5 11 ∕8, 12, 121/4 131S 171/2, 26 2,000–5,000 Insert roller cone bits

300–50 300–50 300–50

CGMW S CGMW

150–60

S

1,700–4,700 1,700–4,700 1,800–4,500 2,100–5,300 1,800–4,700 1,800–4,700 1,700–4,700 2,100–4,500 2,500–6,000 2,500–6,000

115–25 115–25 345–80 200–80 115–60 115–60 115–25 345–80 185–80 185–80

CX CX BMX BMX BGWX BGWX BGWX BGMWX GX X

2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,400–6,200

185–80 185–80 185–80 185–80 185–80 185–80 185–80 185–80 350–80

GX X WX WX X X X MX MBX

GX–20G GX–20H GX–20HM GX–20M GX–22 GX–22S GX–23 GXD–22S MX–20

517 517 517 517 517 517 517 517 517

MX–20G

517

MX–20H

517

STX–20

517

STX–20H VG–18 VG–20 VG–20M VG–22S VGD–20

517 517 517 517 517 517

VGD–21S 517 VGD–22 517

171/2, 24 20, 21 16, 161/2 19, 191/4 171/2 171/2 22, 23 171/2, 181/4, 181/2 121/4 77∕8, 83∕8, 83/4, 97∕8, 121/4 121/4 121/4 121/4 77∕8, 81/2, 83/4 77∕8, 83/4 81/2 77∕8 83/4 6, 61∕8, 83∕8, 81/2, 91/2, 12, 121∕8, 121/4 6, 63/4, 81/2, 105∕8, 115∕8, 121/4 57∕8, 6, 81/2, 83/4, 91/2, 121/4 43/4, 6, 61∕8, 61/4, 61/2, 63/4 51/2 61/4 61∕8, 61/4, 105∕8, 121/4 83/4 83/4 47∕8, 55∕8, 61/4, 63/4, 77∕8, 81/2, 83/4 83/4 47∕8, 81/2, 83/4

2,400–6,200 350–80

B

BGMX

2,400–6,200 350–80

BMX

2,000–4,000 270–80

MX

2,000–4,000 2,000–4,000 2,000–4,000 2,500–6,000 2,500–6,000 2,000–4,000

270–80 270–80 270–80 185–80 185–80 270–80

MX BGWX BGWX BGWX BGWX BGMWX

2500–6,000 185–80 2,500–6,000 185–80

BGMWX BGMWX

VGD–22S 517 VM–20 517 VM–20G VM–20M VMD–20 VMD–20G VMD–22 VMG–20 MX–28 VG–28 VG–28G VG–28H VM–20C VM–28 VM–28G GX–20C GX–20CH GX–25 GX–28

517 517 517 517 517 517 525 525 525 525 525 525 525 527 527 527 527

GX–28C GX–28CM GX–28S MX–28 MX–28G STX–28 VG–20A VG–28 VG–C28 VGD–20C VGD–25 VGD–26 VGD–28 VGD–28G VM–20C VM–20CH VM–28 VM–28C VM–28CM VMD–20C VMD–25 VMD–26 VMD–28 VMD–28C VMD–28G VMD–29 GTX–30 GTX–33 MX–30H VG–30 VG–30G VG–30HM GX–30

527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 535 535 535 535 535 535 537

GX–30G GX–30M GX–30S MX–30 MX–30G

537 537 537 537 537

MX–30H STX–30

537 537

STX–30H VG–28A VG–30 VGD–30

537 537 537 537

VGD–30H VM–30 VM–30H VMD–30

537 537 537 537

VMG–30 GTX–33 GX–30C GX–35 GX–38C GX–38CH MX–35 MX–35C MX–35CG MX–35M MX–38C STX–30C STX–35 VG–25A VG–30A

537 545 547 547 547 547 547 547 547 547 547 547 547 547 547

77∕8, 83/4 61/4, 61/2, 81/2, 91/2, 121/4 105∕8 81/4 81/2, 91/2, 121/4 97∕8 83/4 81/2, 97∕8, 121/4 143/4 171/2 171/2 171/2 171/2 181∕8 17, 171/2 77∕8, 81/2, 83/4 121/4 77∕8 77∕8, 81/2, 83/4, 97∕8, 121/4 77∕8, 11, 121/4 121/4 83/4 81/2, 83/4, 121/4 121/4 61∕8 61/4, 63∕8 121/4 121/4 83/4 83/4 83/4 61∕8, 83/4 121/4 61/2 61/2 121/4 81/2 121/4 57∕8, 81/2, 105∕8 83/4 83/4 83/4 83/4 121/4 83/4 143/4, 16 171/2 16, 171/2 171/2 171/2 171/2 77∕8, 83∕8, 81/2, 83/4, 97∕8, 121/4 121/4 83/4 83/4 6, 61/2, 77∕8, 81/2, 12 81/2, 115∕8, 121/4, 131∕8 81/2, 121/4 33/4, 37∕8, 4, 41/2, 43/4, 55∕8, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4 51/2 83/4 121/4 61∕8, 61/4, 77∕8, 81/2, 83/4 55∕8 81/2, 85∕8, 97∕8, 121/4 81/2 57∕8, 65∕8, 81/2, 83/4, 97∕8, 121/4 77∕8, 97∕8, 121/4 20 77∕8, 81/2, 83/4 77∕8, 81/2, 83/4, 121/4 77∕8, 81/2 77∕8, 81/2, 83/4, 121/4 57∕8, 61∕8 12 83∕8, 81/2 57∕8 97∕8 43/4, 47∕8, 6, 61∕8 6, 61∕8, 61/4 121/4 77∕8, 81/2, 83/4, 87∕8, 105∕8, 11, 121/4, 123∕8

2,500–6,000 185–80 2,400–6,200 350–80

BGMWX BGMWX

2,400–6,200 2,400–6,200 2,400–6,200 2,400–6,200 2,400–6,200 2,400–6,200 1,800–4,700 2,000–4,900 2,000–4,900 2,000–4,900 1,800–4,700 2,100–5,400 1,800–4,700 2,500–6,300 2,500–6,300 2,500–6,300 2,500–6,300

350–80 350–80 350–80 350–80 350–80 350–80 310–80 110–55 110–55 110–55 310–80 175–80 310–80 170–80 170–80 170–80 170–80

BGMWX BGMWX BGMWX BGMWX BGMWX BGMWX BMX BCGWX BCGWX BCGWX BCGMWY BCGMWX BCGMWX Y Y X X

2,500–6,300 2,500–6,300 2,500–6,300 2,600–6,500 2,600–6,500 2,000–4,700 2,000–4,700 2,500–6,300 2,500–6,300 2,500–6,300 2,500–6,300 2,500–6,300 2,000–4,700 2,500–6,300 2,600–6,000 2,600–6,000 2,600–6,500 2,600–6,500 2,600–6,500 2,600–6,000 2,600–6,500 2,600–6,500 2,600–6,500 2,600–6,500 2,600–6,500 2,600–6,500 2,000–5,100 2,000–5,100 1,800–4,900 2,000–5,100 2,000–5,100 2,000–5,100 2,500–6,700

170–80 170–80 170–80 350–80 350–80 250–80 250–80 170–80 170–80 170–80 170–80 170–80 250–80 170–80 350–80 350–80 350–80 350–80 350–80 350–80 350–80 350–80 350–80 350–80 350–80 350–80 105–50 105–50 270–80 105–50 105–50 105–50 160–80

Y WY X BMX BMX MX BGWX BGWX BCGWX BGMWY BGMWX BGMWX BGMWX BGMWX BGMWY BGMWY BGMWX BGMWY BGMWX BGMWY BGMWX BGMWX BGMWX BGMWY BGMWX BGMWX CX CX BMX BCGWX BCGWX BGWX X

2,500–6,700 2,500–6,700 2,500–6,700 2,600–6,400 2,600–6,800

160–80 160–80 160–80 350–80 350–80

GX GX X BMX BGMX

2,600–6,800 350–80 2,000–4,700 235–80

BMX MX

2,000–4,700 2,500–6,700 2,500–6,700 2,500–6,700

235–80 160–80 160–80 160–80

MX ABGWX BGWX BGMWX

2,000–4,700 2,600–6,800 2,600–6,800 2,600–6,800

235–80 350–80 350–80 350–80

BGMWX BGMWX BGMWX BGMWX

2,600–6,800 1,900–5,300 2,900–7,000 2,900–7,000 2,900–7,000 2,900–7,000 2,600–6,400 2,900–7,100 2,600–6,400 2,600–6,400 2,900–7,100 2,000–4,700 2,000–4,700 2,900–7,000 2,900–7,000

350–80 95––20 150–75 150–75 150–75 150–75 350–80 300–80 350–80 350–80 300–80 220–80 220–80 150–75 150–75

BGMWX CX Y X Y Y BMX BMY BGMX BMWX BMY MY MX ABGWX ABGWX

VG–30C 547 VG–35 547 VG–35A 547 VG–35C 547 VG–38 547 VG–38C 547 VG–38CH 547 VGD–30C 547 VGD–35 547 VGD–38C 547 VGD–38CH 547 VM–30C 547 VM–35 547 VM–35C 547 VM–35CG 547 VM–35G 547 VMD–30C 547 VMD–38C 547 VMG– 547 35CG Halliburton EBXT12 435 EBXT437 12D2R EBXT12DR 435 EBXT435 12DRD EBXT12DS 435 EBXT435 12DSL EBXT435 12DSR EBXT12R 435 EBXT12RC 435 EBXT12S 435 EBXT12SC 435 EBXTD- 435 12DR EBXTD- 435 12SR XT12D2S 435 XT12DR 435 XT12R 435 XT12S 435 XT12SR 435 A12R 435 EQH10R 435 EQH10RP 437 EQH12D2R 437 EQH437 12D2RP EQH12DR 437 EQH12DRP 437 EQH12DS 437 EQH12R 437 EQH12RP 437 EQH12S 437 EQHD437 12DSD Q12R 437 QH10D3R 437 QH10R 437 QH12 437 QH12R 437 QH12SR 437 QHK12 437 EBXT14R 437 EBXT14SR 437 EBXT445 14SRC EBXT445 14SRCL EBXT445 16D2R EBXT445 16D2S EBXT445 16D2SL EBXT16DR 445 EBXT16DS 445 EBXT445 16DSL EBXT16R 445 EBXT16S 445 EBXT16SL 445 EBXT18RC 445 EQH14R 445 XT16DR 445 XT16R 445 EQH14DR 445 EQH16D2R 445 EQH447 16D2RC

2,900–7,000 2,900–7,000 2,900–7,000 2,900–7,000 2,900–7,000 2,900–7,000 2,900–7,000 2,900–7,000 2,000–4,700 2,900–7,000 2,900–7,000 2,600–6,400 2,900–7,100 2,900–7,100 2,900–7,100 2,600–6,400 2,900–7,100 2,900–7,100 2,900–7,100

150–75 150–75 150–75 150–75 150–75 150–75 150–75 150–75 220–80 150–75 150–75 350–80 300–80 300–80 300–80 350–80 300–80 300–80 300–80

143/4–28 43/4–131/2

3,000–7,000 40–220 3,000–7,000 40–220

GMW GMW

28 161/2–181/4

3,000–7,000 40–220 3,000–7,000 40–220

GMXWC GMXWC

143/4–26 16

3,000–7,000 40–220 3,000–7,000 40–220

GMXWC GMXWC

Special features/ usage

83/4, 105∕8 81/2 87∕8, 121/4, 123∕8 83/4, 121/4 121/4 61∕8, 77∕8, 83/4, 121/4 77∕8, 83/4, 87∕8, 121/4 83/4, 97∕8 61∕8, 61/4, 83/4 61∕8, 77∕8, 81/2, 83/4 81/2, 83/4 61/2 81/2 85∕8 121/4 61∕8 81/2, 83/4 83/4 121/4

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter 2,000–5,000 1,000–4,000 2,000–4,000 2,000–4,000

1,500–3,000 2,000–4,000 2,000–4,000 2,000–4,000 2,000–3,000 1,500–4,000 2,000–4,000 2,000–4,000 2,000–5,000

Baker Hughes GTX–20 515 GTX–22 515 MX–20 515 MX–22 515 VG–20G 515 VG–20H 515 VG–22 515 VM–20G 515 GT–20H 517 GX–20 517

6–171/2 6–171/2 6–171/2 6–171/2 6–171/2 6–171/2 6–171/2 6–171/2 6–171/2

BS S S

Recommended rotary speed, rpm

SB216

2,000–5,000 160–50 2,000–5,000 160–50 2,000–5,000 160–50

Recommended WOB, lb/in. diameter

216 215 214 215

6, 61∕8 57∕8, 61∕8, 81/2, 12 41∕8, 57∕8, 6, 61∕8, 81/2, 83/4, 12, 121/4 43/4 26 181∕8 81/2, 121/4, 143/4, 151/2, 16, 171/2 35∕8, 33/4, 43∕8, 41/2, 45∕8, 43/4

Size range, in.

FVH2 GVH+ SB214 SB215

Tri–Max TM121 TM124 TM125 TM126 TM131 TM134 TM135 TM136 TM137 Varel ES3G DT3 DT3G

Size range, in.

IADC code

Manufacturer, Bit name/model number

Smith Bits FKVH 217 FV 216 FVH 217

BGWY BGWX ABGWX BGWY BGWX BGWY BGWY BGWY BGWX BGMWY BGMWY BGMWX BGMWX BGMWY BGMWY BGMWX BGMWY BGMWY BGMWY

16–171/2

3,000–7,000 40–220

GMXWC

171/2 24 143/4–28 143/4–28 151/2–223/4

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

GMXWC GMXWC GMXWC GMXWC GMXWC

40–220 40–220 40–220 40–220 40–220

16

3,000–7,000 40–220

GMXWC

22–24 22 171/2 181∕8–28 28 16–20 28 121/4 81/2–121/4 81/2

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

81/2–121/4 61∕8 57∕8–121/4 61∕8–81/2 91/2 55∕8–131/2 81/2

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMXWC GMXW GMXWC GMXWC GMXWC GMXWC GMXWC

81/2–115∕8 121/4 43/4 121/4 83/4 81/2 57∕8–121/4 121/4 81/2–121/4 16

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMXWC GMXWC GMXW GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

16

3,000–7,000 40–220

GMXWC

16

3,000–7,000 40–220

GMXWC

16

3,000–7,000 40–220

GMXWC

161/2

3,000–7,000 40–220

GMXWC

171/2 171/2 143/4–26

3,000–7,000 40–220 3,000–7,000 40–220 3,000–7,000 40–220

GMXWC GMXWC GMXWC

16–171/2 171/2 171/2 16–171/2 171/2 16 121/4 181∕8–28 28 61∕8

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXW

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

World Oil® / JANUARY 2017 D-11

GA545 GAT515 GAT525 GAT535

545 515 525 535

GAT545 GJ515 GJ535 GJT515 GJT535 GJT535GH GJT545 HA517

545 515 535 515 535 535 545 517

HA517GJX 517 HA527 527

HA527GJ 527 HA537 537

HA537GHL 537 HA537GX 537 HA547 547

HA547GHLY HAS517 HAS527 HAS537

547 517 527 537

HAS537 537GHLY HAS547 547 HAT517 517

HAT527

527

HAT527 527GJY HAT527GX 527 HAT537 537

HAT547

547

HF517 HF537

517 537

HF545GH 545 HF547 547 HF547H

547

81/2–121/4 121/4

3,000–7,000 40–220 3,000–7,000 40–220

GMXWC GMXWC

HJ517

517

6–121/4 121/4 91/2 6–121/4 121/4 81/2

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220

GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

HJ517GX HJ527 HJ527GJL HJ537

517 527 527 537

121/4

3,000–7,000 40–220

GMXWC

61∕8 121/4

3,000–7,000 40–220 3,000–7,000 40–220

GMXW GMXWC

HJ547 HJS517 HJS527 HJS537 HJS547GL HJT517

547 517 527 537 547 517

121∕4 81∕2 133∕4, 143∕4, 16, 171∕2 171∕2 115∕8, 121∕4, 143∕4, 171∕2 121∕4, 143∕4, 171∕2 81∕2, 133∕4, 143∕4, 171∕2 143∕4 121∕4, 131∕2, 133∕4, 143∕4, 16, 171∕2 143∕4 16, 171∕2 81∕2, 12, 1∕4, 16, 171∕2 81∕2, 12, 16, 171∕2 81∕2, 16, 171∕2 16 81∕2 37∕8, 41∕8, 41∕4, 43∕8, 41∕2, 45∕8, 43∕4, 47∕8, 5, 51∕2, 57∕8, 6, 61∕8, 61∕4, 61∕2, 63∕4, 71∕2, 77∕8, 83∕8, 81∕2, 83∕4, 91∕2, 95∕8, 97∕8, 105∕8, 11, 12, 121∕4, 125∕16, 123∕8, 171∕2 91∕2 41∕8, 57∕8, 6, 61∕8, 61∕4, 63∕4, 77∕8, 83∕8, 81∕2, 83∕4, 97∕8, 11, 121∕4, 171∕2 77∕8, 83∕4 33∕4, 37∕8, 41∕8, 43∕4, 47∕8, 51∕4, 53∕4, 57∕8, 6, 61∕8, 61∕2, 63∕4, 71∕4, 71∕2, 77∕8, 83∕8, 81∕2, 83∕4, 91∕2, 95∕8, 97∕8, 105∕8, 11, 12, 121∕8, 121∕4, 123∕8 83∕4 91∕2, 121∕4 43∕4, 47∕8, 51∕2, 55∕8, 53∕4, 6, 61∕8, 61∕4, 61∕2, 63∕4, 71∕2, 77∕8, 81∕2, 83∕4, 97∕8, 105∕8, 11, 121∕4 83∕4 6, 61∕8, 77∕8 77∕8, 83∕4 6, 61∕8, 61∕2, 77∕8, 81∕2, 83∕4 77∕8

1,500–4,000 1,500–4,000 1,500–4,500 1,600–4,500 2,000–4,500

120–50 120–50 200–80 200–80 200–80

ACG ACG CGL CGY CGY

HJT527 HJT537

527 537

2,000–4,500 1,500–4,500 1,500–4,500 2,000–4,500

200–80 200–80 200–80 200–80

CGY CGL GYC CGL

2,000–4,500 1,500–4,500 2,000–4,500 1,500–4,500 2,000–4,500 2,000–4,500 2,000–4,500 2,000–6,000

200–80 300–80 280–80 300–80 280–80 280–80 280–80 120–50

GYC CGLY CGLx CGLK CGLY G CGLY

2,000–6,000 120–50 2,000–6,000 120–50

GJx CGLY

2,000–6,000 120–50 2,800–6,000 110–40

GJLY GLY

2,800–6,000 110–40 2,800–6,000 110–40 2,800–6,000 110–40

GL Gx CGLY

2,800–6,000 2,000–6,000 2,000–6,000 2,800–6,000

110–40 120–50 120–50 110–40

GLY CGL GL GLY

2,800–6,000 110–40

GLY

61∕8, 61∕2, 77∕8, 83∕4 45∕8, 43∕4, 47∕8, 55∕8, 52∕3, 57∕8, 6, 61∕8, 61∕4, 61∕2, 63∕4, 75∕8, 77∕8, 81∕2, 83∕4, 91∕2, 97∕8, 105∕8, 11, 121∕4, 16 57∕8, 6, 61∕8, 77∕8, 81∕2, 83∕4, 97∕8, 11, 121∕4 77∕8, 81∕2, 83∕4

2,800–6,000 110–40 2,000–6,000 120–50

GLY CGL

2,000–6,000 120–50

CGLY

2,000–6,000 120–50

GJLY

121∕4 41∕2, 45∕8, 43∕4, 47∕8, 51∕2, 55∕8, 52∕3, 57∕8, 6, 61∕8, 61∕4, 61∕2, 77∕8, 81∕2, 83∕4, 97∕8, 105∕8, 12, 121∕4 47∕8, 51∕2, 55∕8, 52∕3, 57∕8, 6, 61∕8, 61∕2, 63∕4, 77∕8, 83∕4, 121∕4 81∕2 61∕2, 77∕8, 81∕2, 83∕4, 91∕2, 97∕8, 105∕8, 121∕4 121∕4 61∕8, 77∕8, 81∕2, 83∕4, 91∕2, 97∕8, 105∕8, 121∕4 61∕8, 77∕8, 81∕2, 83∕4, 91∕2, 97∕8, 105∕8, 121∕4

2,000–6,000 120–50 2,800–6,000 110–40

Gx GLY

2,800–6,000 110–40

CGLY

2,000–6,000 120–50 2,800–6,000 110–40

CGL GL

2,000–4,500 200–80 2,000–6,000 110–40

G GLY

2,800–6,000 110–40

GLY

D-12 2017 Drill Bit Classifier

HJT537GH 537 HJT537GX 537 HJT547 547 HJT547GHY MD517

547 517

MD517HX 517 MD527 527 MD537

537

MD537H

537

MD547

547

SMD517 517 SMD537 537 SMD547 547 ReedHycalog Bits JA30 547 R19A 527 R20A 517 R21A 517 R22A 517

R23A R24 R24A R25 R25A R27 R30

517 527 527 527 527 527 537

R30A

537

R34A R35 R35A R37 RD21 RD33 RH20A RH21A RH22 RH22A

547 537 547 547 517 537 517 517 517 517

RH25A RH27 RH28A RH30 RH30A

527 527 527 537 537

RH34A RH37 S51 S51A

547 547 517 515, 517 527 535, 537

S52 S53A

77∕8, 83∕8, 81∕2, 91∕2, 121∕4, 125∕16, 123∕8, 171∕2 91∕2, 121∕4 81∕2, 171∕2 83∕4 83∕8, 81∕2, 91∕2, 95∕8, 121∕8, 121∕4, 125∕16, 123∕8 81∕2, 125∕16 121∕4 81∕2 81∕2, 121∕4 81∕2 83∕8, 81∕2, 83∕4, 91∕2, 105∕8, 121∕4, 125∕16, 123∕8, 127∕16, 131∕8 81∕2, 121∕4 81∕2, 91∕2, 121∕4, 125∕16, 123∕8, 127∕16, 125∕8, 131∕8 83∕8, 81∕2, 121∕4 121∕4 81∕2, 91∕2, 125∕16, 123∕8, 125∕8 81∕2 5 ∕2, 5 ∕8, 6, 6 ∕8, 6 ∕4, 61∕2, 63∕4, 71∕2, 77∕8, 81∕2, 83∕8, 83∕4, 95∕8, 115∕8, 121∕4 6, 61∕2, 81∕2, 91∕2, 95∕8 57∕8, 6, 61∕4, 61∕2, 77∕8, 81∕2, 83∕4, 91∕2, 11, 121∕4 57∕8, 6, 61∕8, 61∕4, 77∕8, 83∕8, 81∕2, 83∕4, 91∕2, 97∕8, 105∕8, 11, 121∕4, 131∕8 6, 61∕4, 61∕2, 77∕8, 81∕2, 83∕4, 91∕2, 97∕8, 105∕8, 11, 121∕4 6, 61∕8, 61∕2, 77∕8, 81∕2, 83∕4, 91∕2, 121∕4 83∕8, 81∕2 83∕8, 81∕2, 83∕4 81∕2 1

7

1

1

121/4 77∕8 83/4 77∕8 41∕8, 43/4, 47∕8, 55∕8, 57∕8, 6, 61∕8, 63/4, 77∕8, 83∕8, 81/2, 83/4, 121/4 83/4 83/4 83/4, 83/4 83/4 77∕8, 81/2, 83/4, 97∕8 83/4, 97∕8 43/4, 57∕8, 6, 63/4, 77∕8, 97∕8, 11 33/4, 37∕8, 41∕8, 41/2, 45∕8, 43/4, 47∕8, 51/2, 55∕8, 57∕8, 6, 61/2, 63/4, 77∕8, 81/4, 83∕8, 91/2, 97∕8, 105∕8, 115∕8, 12 87∕8, 91/2 77∕8 77∕8, 121/4 61/4, 77∕8, 83/4 77∕8, 81/2, 91/2 77∕8, 83/4 81/2 83/4 121/4 61∕8, 61/4, 61/2, 97∕8, 105∕8, 121/4 97∕8 77∕8 77∕8, 83/4 61∕8, 81/2, 83/4, 121/4 61∕8, 61/4, 61/2, 81/2, 83/4, 121/4 83/4, 121/4 77∕8 77∕8 81/2, 121/4, 141/2, 151/2, 16, 171/2 77∕8 81/2, 121/4, 151/2, 171/2

2,000–6,000 240–50

CGKL

S54 S54A

2,000–6,000 2,000–6,000 2,000–6,000 2,800–6,000

240–50 240–50 240–50 220–40

Gx CGLY GJL CGL

T51

2,800–6,000 2,000–6,000 2,000–6,000 2,800–6,000 2,800–6,000 2,000–6,000

220–40 240–50 240–50 220–40 220–40 240–50

CG CGL GL GL GL CGL

2,000–6,000 240–50 2,800–6,000 220–40

G GL

2,800–6,000 220–40 2,800–6,000 220–40 2,800–6,000 220–40

GL Gx GLY

2,800–6,000 220–40

GLY

2,000–6,000 300–60

GL

2,000–6,000 300–60 2,000–6,000 300–60

GLM

2,000–6,000 300–60

GLMx

2,000–6,000 300–60

GLDxY

2,000–6,000 300–60

GLMY

2,000–6,000 300–60 2,000–6,000 300–60 2,000–6,000 400–60

GL GL GL

2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000

200–60 200–60 200–60 200–60 200–60

AY GMWX GMWX GMWX CGMWX

2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000

200–60 200–60 200–60 200–60 200–60 200–60 200–60

GMWX GMWY GMWX GMWY GMWX GMWY CGMWY

2,000–5,000 200–60

CGMWX

2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000

200–60 200–60 200–60 200–60 200–60 200–60 200–60 200–60 200–60 200–60

GMWX GMWY CGMWX GMWY GHMWZ GHMWZ GMWX GMWX CGMWY GMWX

2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000

200–60 200–60 200–60 200–60 200–60

GMWX GMWY GMWX CGMWY CGMWX

2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000

200–60 200–60 200–60 450–60

CGMWX GMWY CY CX

2,000–5,000 200–60 2,000–5,000 450–60

Y CX

T52 T53 T53A T54 TH51A TH52A Rubicon G51FH G51SH G53FH G53SH P51SH P51FH

545 545, 547 515 525 535 535 545 515 525 517 515 537 535 515 517

P53SH 535 P53FH 537 P54FH 547 Smith Bits 20GM 515X 2JS 515X 3JS 535X F21YA 517Y F23YA 517Y F25Y 517Y F25YA 527Y F27IY 527Y F27Y 527Y F27YA 527Y F30 537X F30T 537X F30UB 537X F30W 537X F30WUB 537X F37 547Y F37HY 547Y F37Y 547Y F37YA 547Y F3D 537X FH23 517X FH25 527X FH28 527X FH30 537X FH30B 537X FH30D 537X FH35 547X FHI20 517X FHI21 517X FHI21B 517X FHI21D 517X FHI23 517X FHI24Y 527Y FHI25 527X FHI25D 527X FHI28 527X FHI28D 527X FHI30 537X FHI30U 537X FHI30W 537X FHI32 537X FHI32D 537X FHI32U 537X FHI34YD 537Y FHI35 547X FHI37HY 547Y FHI37HYD 547Y FHI39HY 547Y FHK30 537X FHK30D 537X FHK35 547X FHKI20 517X FHKI28 527X FI27Y 527Y G20 515X G25 515X G28B 525X G30 535X G30B 535X G30WD 535X GF15H 517X GF20 517X GF20B 517X GF20BD 517X GF20D 517X GF20Y 517Y GF25H 517X

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

EQH16DR 447 EQH447 16DRG EQH16DS 447 EQH16R 447 EQH16RC 447 EQH16S 447 EQHA16R 447 EQHD447 14D3R EQHD447 16DSP QH16DR 447 QH16R 447 Kingdream A547 547 A547H 547 GA515 515 GA525 525 GA535 535

26 71/2, 171/2

2,000–5,000 450–60 2,000–5,000 450–60

CY CX

143/4, 151/2, 16, 161/2, 171/2, 181∕8, 181/4 16 143/4, 24 171/2 26 171/2 171/2

2,000–5,000 450–60

CGMWY

2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000

450–60 450–60 450–60 450–60 450–60 450–60

CGMWY CGMWY CGMWX CGMWY CGMWX CGMWX

6, 8½, 97∕8, 12¼ 8½, 97∕8, 12¼ 6, 8½, 97∕8, 12¼ 8½, 97∕8, 12¼ 121/4, 171/2 63/4, 77∕8, 81/2, 83/4, 97∕8, 121/4 81/2, 83/4, 97∕8, 121/4 81/2, 83/4, 97∕8, 121/4 61∕8

2,000–4,000 2,000–4,500 2,500–5,000 2,500–5,000 2,000–4,500 2,000–4,500

50–110 50–100 50–80 50–80 50–160 50–250

GW SG GW SG CWG GW

2,500–5,000 60–250 2,500–5,000 60–250 2,000–4,000 50–100

GW GW GW

16 17, 171/2, 23, 26 171/2, 191/4 121/4 83/4 121/4 121/4 77∕8, 83/4 83/4, 11 83/4 105∕8 83/4 81/2 81/2 81/2 105∕8 83/4, 87∕8 81/2, 11, 121/4 83/4, 121/4 75∕8 81/2, 97∕8 77∕8 97∕8 71/2, 81/2, 83/4, 97∕8 81/2, 85∕8 83/4 81/2, 83/4, 97∕8 77∕8, 81/2, 83/4 83/4 77∕8, 81/2, 83/4 83/4 77∕8, 81/2, 83/4 77∕8 83/4 83/4 77∕8, 81/2, 83/4 83/4 75∕8, 77∕8 75∕8, 77∕8 83/4 83/4 83/4 83/4 83/4 77∕8, 83/4 77∕8, 83/4 83/4 83/4 81/2 81/2 81/2 81/2 81/2 77∕8 151/2 143/4 171/2 151/2 171/2 143/4 83/4 83∕8, 81/2, 97∕8, 115∕8 12, 121/4 121/4 81/2 81/2 81/2

1,500–4,000 1,000–4,000 1,000–4,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–7,000 2,000–7,000 2,000–7,000 2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 2,500–6,000 2,000–5,000 2,000–6,000 2,000–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–7,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 2,500–6,000 3,000–7,000 3,000–7,000 3,000–7,000 2,500–6,000 2,500–6,000 2,500–6,000 2,000–5,000 2,000–6,000 2,000–7,000 1,500–4,000 1,500–4,000 1,500–4,000 1,500–4,000 1,500–4,000 1,500–4,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000

BGHMX X X Y Y Y Y Y Y AY X X X WX X Y Y Y AY GWX X X X X WX GWX X X X WX GWX X Y X GWX X GWX X X WX X GWX X GWY X Y GWY Y BX BX BX BX BX Y BGHMX BGHMX BGHMWX BGHMX BGHMWX BGHMWX BGHMX BGHMX BGHMWX BGHMWX BGHMWX BGHMY BGHMWX

250–50 140–70 140–70 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 220–50 160–50 220–50 220–50 220–50 220–50 220–50 160–50 250–50 250–50 250–50 240–50 240–50 240–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50

2,000–5,500 300–50

HMX

2,000–5,500 2,000–5,500 2,000–5,500 2,000–5,500 2,000–5,500 2,000–5,500 2,000–5,500 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,500 2,000–5,500 2,000–5,500 2,000–5,500 2,000–5,000 2,000–5,000 2,000–5,500 2,000–5,000 2,000–5,000 2,000–5,000

GHMWX GHMWX HMY HMY AHMY GHMWY HMX HMX GHMWX HMX HMX GHMWX HMY HMX BGHMY BHMY BHMX HMX HMX BGHMY

300–50 270–50 300–50 300–50 300–50 270–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50

1,000–2,500 60–50 1,000–5,000 250–60

GX GLMX

1,000–5,000 250–60

GLMX

1,000–4,000 300–60 1,000–5,000 250–60 1,000–5,000 250–60

GLMX GLMY GLMX

M25GFSP 527X 81/2, 121/4 1,000–5,000 M25GP 527X 55∕8, 57∕8, 6, 61∕8 1,000–4,000 M30GFP 537X 83∕8, 81/2, 83/4, 97∕8, 1,000–5,500 5 11 ∕8, 12, 121/4 M30GFSP 537X 83∕8, 81/2, 83/4, 97∕8, 1,000–5,500 115∕8, 12, 121/4 M30GP 537X 55∕8, 57∕8, 6, 61∕8 1,000–4,500 MZ20GFP 515X 16, 171/2 1,500–4,000 MZ30GFP 535X 16, 171/2 1,500–4,000 X20G 517X 55∕8, 57∕8, 6, 61/4, 1,500–4,000 75∕8, 75∕8 X20G 517X 83∕8, 81/2, 83/4, 97∕8, 2,000–5,000 105∕8, 115∕8, 12, 121/4 X20G 517X 16, 171/2 1,500–4,500 X25G 527X 81/2, 121/4 2,000–5,000 X30G 537X 43/4, 55∕8, 57∕8, 6, 61∕8, 1,000–3,500 75∕8, 77∕8 X30G 537X 83∕8, 81/2, 83/4, 97∕8, 2,500–5,500 105∕8, 115∕8, 12, 121/4 X30G 537X 143/4, 151/2, 16, 171/2 2,000–4,500 XZ20GFP 515X 81/2, 121/4 1,500–4,500 XZ20GP 515X 16, 171/2 1,500–4,000 XZ30GFP 535X 81/2, 121/4 2,000–5,000 XZ30GP 535X 16, 171/2 2,000–4,500 Z20G 515X 81/2, 121/4 1,500–4,500 Z20G 515X 20, 22, 23, 24, 26 1,000–3,000 Z30G 535X 81/2, 121/4 2,000–5,000 Z30G 535X 20, 22, 23, 24, 26 1,500–3,500 Tri–Max TM515 515 6–171/2 2,000–4,000 TM517 517 6–171/2 2,000–5,000 TM527 527 6–171/2 2,000–5,000 TM537 537 6–171/2 2,000–5,000 TM545 545 6–171/2 2,000–4,000 TM547 547 6–171/2 2,500–5,000 Varel ES24V 515X 16, 171/2 1,500–4,750 ES24 515X 26, 27 1,500–4,750 ES20V 515Y 171/2 1,500–4,750 CM24V 516X 37∕8 2,000–6,000 HE20V 517X 77∕8, 83/4, 97∕8 2,000–6,000 7 HE21V 517Y 7 ∕8, 81/2, 83/4 2,000–6,000 HE22V 517X 77∕8, 83/4 2,000–6,000 HE23V 517Y 77∕8, 83/4 2,000–6,000 CM24 517X 43/4, 47∕8, 55∕8, 57∕8, 6, 2,000–6,000 61∕8, 61/4, 61/2 CM24V 517X 63/4 2,000–6,000 HE24 517X 11 2,000–6,000 7 HE24V 517X 71/2, 7 ∕8, 81/2, 83/4, 2,000–6,000 97∕8, 115∕8, 12, 121/4 CM25 517Y 6, 61∕8, 61/4 2,000–6,000 HE25 517Y 11 2,000–6,000 HE25V 517Y 121/4 2,000–6,000 HE26V 527X 77∕8 2,000–6,000 HE27V 527X 77∕8 2,000–6,000 1 CM28 527X 6, 6 ∕8, 61/4 2,000–6,000 7 HE28V 527X 7 ∕8, 81/2, 83/4 2,000–6,000 ES28V 525X 141/2 1,500–4,750 HE29 527Y 11 2,000–6,000 HE29V 527Y 83/4, 121/4 2,000–6,000 HE29HV 527Y 77∕8 2,000–6,000 HE30V 537Y 83/4 2,000–6,500 HE31V 537Y 11 2,000–6,500 HE31V 537Y 77∕8, 83/4, 121/4 2,000–6,500 ES34V 535X 143/4, 17, 171/2 2,250–5,250 CM34 537X 41/2, 43/4, 47∕8, 51/2, 2,000–6,500 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4, 61/2 CM34V 537X 63/4 2,000–6,500 2,000–6,500 HE34 537X 81/4, 83∕8, 105∕8 HE34V 537X 71/2, 75∕8, 77∕8, 81/2, 2,000–6,500 83/4, 97∕8, 115∕8, 12, 121/4 ES38V 545X 171/2 2,000–5,000 ES35V 545Y 143/4 2,000–5,000 7 2,500–6,000 AF35 547A 7 ∕8 AF37 547A 11, 121/4 2,500–6,000 CM35 547Y 43/4, 47∕8, 61∕8 2,500–7,000 CM38 547X 61∕8, 61/4, 63/4 2,500–7,000 7 HE38V 547X 7 ∕8, 83/4 2,500–7,000 HE37V 547Y 77∕8, 81/2, 83/4 2,500–7,000 HE37 547Y 11 2,500–7,000 HE39 547Y 77∕8, 83/4, 121/4 2,500–7,000 HE39H 547Y 77∕8 2,500–7,000 Fish tail bits Bit–Tech DP–440– M131 61∕4 BG Halliburton FM3443 M431 61∕8, 63/4

250–60 300–60 250–60

GLMX GLMX GLMX

250–60

GLMX

300–60 250–60 250–60 120–60

GLMX GLMX GLMX GX

120–60

GX

120–60 120–60 110–50

GX GX GX

110–50

GX

110–50 250–70 150–70 250–50 150–60 100–50 100–50 100–45 100–45

GX GLMX GLX GLMX GLX GX GX GX GX

80–150 65–120 65–120 65–120 80–150 65–120 300–50 150–50 300–50 275–50 300–50 300–50 300–50 300–50 275–50

CMW CMW CMW

275–50 300–50 300–50

MW

275–50 300–50 300–50 300–50 300–50 275–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 300–50 275–50

MW

MW MW MW MW MW

CMW

MW MW MW MW CMW CMW MW MW MW MW MW CMW MW

275–50 300–50 300–50

MW MW MW

300–50 300–50 300–50 300–50 275–50 275–50 300–50 300–50 300–50 300–50 300–50

CMW CMW AW AW MW MW CMW CMW CMW CMW CMW

300–2,000

100–500 ADGMVW

500–2,000

60–400

MVW

FMF3443 FMH3443 FMR3443 FM3445 FMF3445 FMH3445 FMR3445 FM3445 FMF3445 FMH3445 FMR3445 FM3445 FMF3445 FMH3445 FMR3445 FM3461 FMF3461 FMH3461 FMR3461 FM3463 FMF3463 FMH3463 FMR3463

M431 M431 M431 M121 M121 M121 M121 M131 M131 M131 M131 M331 M331 M331 M331 M221 M221 M221 M221 M421 M421 M421 M421

60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400

MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW MVW

Atlas Copco M413 M513 M613 M713 M813 S413 S513 S613 S713 S813 M416 M516 M616 M716 M816 M916 S416 S516 S616 S716 S816 S916 S1116 S1316 S1516 Baker Hughes AT605 M223 AT605S S223 HC404 M133 HC405 M33 HC406 M233 HC504 M123 HC505 M333 HC506 M223 HC604 M123 HC605 M323 HC606 M223 HCD304 M243 HCD404 M133 HCD405 M333 HCD406 M233 HCD504 M123 HCD505 M223 HCD506 M223 HCD604 M123 HCD604S S223 HCD604Z M223 HCD605 M323 HCD606 M223 Q404 M133 Q405 M233 Q406 M233 Q504 M123 Q505 M223 Q506 M223 Q603 M223 Q604 M123 Q605 M323 Q606 M223 QD204 M243 QD404 M133 QD405 M233 QD406 M233 QD504 M123 QD505 M323

51/4–121/4 51/4–121/4 51/4–121/4 51/4–121/4 51/4–121/4 61∕8–121/4 61∕8–121/4 61∕8–121/4 61∕8–121/4 61∕8–121/4 51/4–121/4 51/4–143/4 51/4–143/4 51/4–171/2 51/2–171/2 51/2–171/2 61∕8–121/4 61∕8–143/4 61∕8–171/2 61∕8–171/2 77∕8–171/2 151/2–36 20–36 20–36 20–36

400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000

60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400

X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U X,U

31∕8–28 57∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 33/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 91/2 81/2 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 81/2 31∕8–28 31∕8–28 31∕8–28 33/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28

235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500

350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 60–400 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 350–50 350–50 350–50 60–400 350–50 350–50 350–50 350–50 350–50

DRstGVW DRstGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW

Special features/ usage

500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000 PDC drill bits

Size range, in. 61∕8, 63/4 61∕8, 63/4 61∕8, 63/4 61/4 61/4 61/4 61/4 97∕8, 121/4 97∕8, 121/4 97∕8, 121/4 97∕8, 121/4 81/2 81/2 81/2 81/2 97∕8 97∕8 97∕8 97∕8 61∕8 61∕8 61∕8 61∕8

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

BGHMY BGHMX BGHMWX BGHMWX BGHMWX BGHMY BGHMY BGHMY BGHMX BGHMX BGHMWX BGHMX BGHMWX BGHMX BGHMWX BGHMWX BGHMWY BGHMX BGHMWX BGHMWY BGHMX BGHMWX BGHMY BGHMX BGHMWX BGHMWX BGHMX BGHMX BGHMX BGHMX BGHMWX BGHMX BGHMWX BGHMWX X X HMX Y X X WX X WX X Y X WX WY Y BGHMTX HMX HMWX HMX HMY HMWX HMWY GHMWY HMX HMX

Manufacturer, Bit name/model number

280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 250–50 250–50 240–50 220–50 220–50 220–50 220–50 220–50 220–50 140–70 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 280–50 300–50 300–50 300–50 300–50 300–50 300–50 270–50 300–50 300–50

Recommended rotary speed, rpm

537X 4, 41∕8 517X 83∕8, 81/2, 83/4, 97∕8, 115∕8, 12, 121/4 M20GFSP 517X 83∕8, 81/2, 83/4, 97∕8, 115∕8, 12, 121/4 M20GP 517X 55∕8, 57∕8, 6, 61∕8 M20GYFP 527Y 81/2, 121/4 M25GFP 527X 81/2, 121/4

2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–6,000 2,000–6,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 1,000–4,000 1,000–4,000 1,500–4,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 1,000–4,000 1,000–4,000 2,000–4,000 2,000–4,000 2,000–4,000 2,000–4,000 2,000–4,000 2,000–4,000 2,000–4,000 2,000–4,000 2,000–4,000 2,000–4,000 1,000–4,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,500

Recommended WOB, lb/in. diameter

537X 537X 547Y 547Y 547Y 547Y 537X 517X 517X 527X 537X 537X 537Y 547X 517Y 537X 537X 517X 517X 517Y

Special features/ usage

537X

Recommended rotary speed, rpm

XR30T XR30TD XR30TDD XR30TY XR30Y XR30YA XR30YDD XR32T XRI20 XRI20D XRI28 XRI30 XRI30D XRI30Y XRI35 XRK20Y XRK30 XRK30T XRS20T XRSI20 XRSI20Y TIX–TSK K30G M20GFP

81/2 81/2, 97∕8 121/4 81/2 81/2 81/2, 91/2 121/4 121/4 91/2 81/2 121/4 81/2 121/4 81/2 121/4 121/4 121/4 81/2 121/4 81/2 81/2 121/4 81/2 81/2, 115∕8 121/4 121/4 105∕8 81/2, 105∕8 143/4 171/2 16, 181/2 105∕8 105∕8 105∕8 83∕8 81/2 81/2 171/2 141/2, 20 81/2, 121/4 121/4 12 121/4 171/2, 20, 24, 26 171/2 81/2, 121/4 81/2, 121/4 81/2 81/2 24 43/4, 47∕8, 51/2, 61∕8 63/4 57∕8, 6, 61∕8, 61/4, 61/2 6 61/4 31/2, 33/4 6 63/4 41∕8, 41/4, 45∕8, 43/4, 47∕8, 51/2, 61/2 55∕8, 53/4, 57∕8, 6, 61∕8, 61/2, 65∕8 6 6 6, 61∕8 37∕8 61/4, 63∕8 6 63/4 6, 61∕8 6 61∕8 61∕8, 61/4, 63/4 61∕8 61∕8 61∕8, 61/4 31/2 41/4 57∕8 57∕8, 61/2 6, 61∕8 61∕8

Recommended WOB, lb/in. diameter

517Y 537X 537X 537X 537X 537Y 537Y 547Y 517X 517X 517X 527X 527X 537X 537X 547X 547Y 537X 537X 537Y 517X 517X 527Y 537X 537X 537X 517X 527X 525X 525X 535X 517X 517X 517X 517X 517X 517X 447Y 515X 517X 517X 527X 527X 535X 535Y 537X 537X 537Y 547Y 515T 517X 517X 517X 5177 517X 517Y 517Y 517X 537X

Size range, in.

IADC code

Manufacturer, Bit name/model number GF25HY GF30 GF30B GF30D GF30W GF30Y GF30YB GF37Y GFI21 GFI23 GFI23B GFI28 GFI28B GFI30 GFI30B GFI35B GFI35UYB GFK30 GFK30B GFK30Y GFS20 GFS20B GFS25HY GFS30 GFS30B GFS30DB GFSI20 GFSI28 GS25 GS28B GS30B MF15H MF15HB MF15HUB MF20B MFS20 MFS20T MI18YA SB515 SB517 SB517D SB527 SB527D SB535 SB535Y SB537 SB537D SB537DD SB547 TCTSI20B XR20 XR20B XR20T XR20TY XR20W XR20Y XR20YDD XR25T XR30

World Oil® / JANUARY 2017 D-13

300–2,000 500–2,000 500–2,000 500–2,000 500–2,000 500–2,000

60–400 60–400 60–400 60–400 60–400 60–400

GHMIUl GHMIRSTUm GHMIRSTUm GHMIRSTUl GHMIUm GHMIUm

500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500

50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

D-14 2017 Drill Bit Classifier

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

M223 M223 M223 M223 M224 M224 M224 M224 M224 M224 M224 M224 M224 M224 M224 M224 M231 M232 M232 M232 M232 M232 M232 M232 M233 M233 M233 M233 M233 M233 M233 M233 M233 M233 M233 M233 M233 M233 M233 M233 M233 M233 M234 M235 M235 M242 M242 M243 S222 S222 S222 S222 S222 S222 S222 S222 S222 S222

121/4 143/4 141/2 141/2 16 161/2 161/2 181∕8 16 16 16 121/4 121/4–16 121/4–141/2 121/4 161/2 81/2 77∕8–97∕8 81/2–83/4 81/2 83/4 97∕8 81/2 81/2 61∕8 6–123/4 61∕8 6 81/2 83∕8 6 83∕8 83∕8–121/4 81/2 121/4 121/4 121/4 161/2 121/4 83/4 121/4 121/4 121/4 57∕8 57∕8 83/4 83/4 81/2 121/4 81/2–121/4 121/4 81/2–83/4 81/2–121/4 121/4 121/4 121/4 121/4 121/4

500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 250–3,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500

50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–350 50–350 50–350 50–350 50–350 50–150 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst F F F F F F F F F F F F MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst F MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

SFE65C S222 SFE65H S222 SFG75 S222 SFG75H S222 GT46Ds S223 GTD56Cs S223 GTD75DHs S223 GTE56Cs S223 GTE75Cs S223 S76 S223 SF06 S223 SF35CH S223 SF55C S223 SF55D S223 SF55DR S223 SF56R S223 SF65C S223 SF65H S223 SF75DH S223 SF75H S223 SF75M S223 SF85H S223 SFD46D S223 SFD55CH S223 SFD65 S223 SFD66 S223 SFD75D S223 SFD75DH S223 SFE66 S223 SFG66H S223 FC3757A S224 GT65Cs S224 GTD56s S224 SF36 S224 SF85 S224 SFD36 S224 SFD56 S224 SFD65D S224 SFD65DH S224 SFD65MH S224 SFE55H S224 SFG65DH S224 SF54DH S232 SFD54 S232 SFD54H S232 SFD64 S232 GTE34D- S233 DCHs SF44H S233 SF54 S233 SFD64H S233 FC3649A S234 FC3747A S234 SF64H S234 SF74D S234 SFE64 S234 SFD83 S242 SF33H S244 Kingdream KM1355 M233 KM1642 M233 KM1652 M223 KM1653 M323 KM1942 M223 KM1944 M223 KM1951 M223 KS1642 S223 KS1652 S223 KS1942 S223 KS1944 S323 KS1951 S223 PDC Logic PL516 M123

121/4 121/4 121/4 121/4 151/2 121/4 16 121/4 181/2 181/2 28 81/2 115∕8 131∕8 121/4 121/4 115∕8 121/4 16 16 163∕8 181/2 115∕8 121/4 121/4 171/2 16 16 171/2 171/2 121/4 121/4 121/4 81/2 161/2–181∕8 81/2 121/4 121/4 121/4 121/4 121/4 121/4 6 6–83/4 6 121/4 81/2

500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 250–2,000

50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–150

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

61/2 121/4 121/4 97∕8 97∕8 121/4 171/2 85∕8 83/4 35∕8

250–2,000 250–2,000 250–2,000 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 500–2,500 500–2,500

50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–350 50–350

MVWRst MVWRst MVWRst F F MVWRst MVWRst MVWRst MVWRst MVWRst

57∕8–171∕2 57∕8–171∕2 57∕8–171∕2 57∕8–171∕2 57∕8–171∕2 57∕8–171∕2 57∕8–171∕2 41∕2–171∕2 41∕2–171∕2 41∕2–171∕2 41∕2–171∕2 41∕2–171∕2

857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685

60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300

SGADTR SGADTR SGADTR SGADTR SGADTR SGADTR SGADTR SGADTR SGADTR SGADTR SGADTR SGADTR

Special features/ usage

DGHMVW

50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350 50–350

Recommended rotary speed, rpm

60–350

500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500

Size range, in.

250–3,000

81/2 83/4 83∕8 83/4 121/4 121/4 81/2 91/2 81/2 121/4–131/2 121/4 131∕8 97∕8–121/4 81/2 141/2 143/4 181/2 181∕8 81/2 81/2 121/4 121/4 121/4 16 181∕8 16 81/2 105∕8–143/4 121/4 121/4 121/4

IADC code

DGHMVW DGHMVW

M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223 M223

Manufacturer, Bit name/model number

60–350 60–350

Special features/ usage

250–3,000 250–3,000

Recommended rotary speed, rpm

DGHMVW

Recommended WOB, lb/in. diameter

60–350

Size range, in.

250–3,000

MM35MH MM45 MM45MH MM45R MM55D MM55DR MM55H MM55RH MM55RM MM56 MM65DM MM65H MM65M MM66RM MM75 MM75D MM76M MM85M MMD45C MMD46C MMD55 MMD56 MMD65H MMD65MH MMD85D MMD85DH MME45C MME65 MME65C MME65DM MME65DMH MME65MH MME75M MMG75 MMG75M MM65DH MM85 MM95C MM96 MM96R MM96RH MMD56DH MMD56M MMD65D MMD85 MME56M MMG85 FC294Li MMD54 MMD54C MMD54M MMD64 MMD64C MME54 MMG54 CD104 CD202 FC263Li FC263UF FC284 FC3633 FC3635 FC3733 FC3843 FC3843i FC3847 FC3947 M64 M84 MM74C MMD44C MMG74 MMG74C MMD84 MMD44D MMG44DH MM63 MMD83M FC272 GT55s GTD55s GTE55s SFD55 SFD55H SFD65H SFD65M SFD75 SFE46H SFE56

IADC code

DGMVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW

Manufacturer, Bit name/model number

350–50 350–50 350–50 350–50 60–400 350–50 350–50 60–400 350–50 350–50 350–50 350–50 60–400 60–400 350–50 350–50 350–50 350–50 350–50 350–50 60–400 350–50 350–50 60–400 60–400 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 60–400 60–400 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50

Special features/ usage

235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500

Recommended WOB, lb/in. diameter

M132 43/4, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 77∕8, 81/2, 83/4 D613 M232 6, 61∕8, 61/4, 61/2, 63/4 D619 M222 77∕8, 81/2, 83/4, 97∕8, 121/4 D719 M322 77∕8, 81/2, 83/4, 97∕8, 121/4 Drill Master, Inc. M410 M141 33/4 M413 M131 61/2 M416 M123 77∕8 M419 M121 97∕8, 121/4 M616 M223 91/2 M616 M323 105∕8 Halliburton M55 M221 6 MM55 M222 83/4 MM65D M222 121/4 MM76 M222 171/2 MM76H M222 171/2 MMD55C M222 81/2 MMD65 M222 121/4 MMD65C M222 121/4 MMD65CH M222 121/4 MMD65M M222 121/4 MMD65RH M222 121/4 MMG65 M222 121/4 MMG65R M222 121/4 GT65M M223 121/4 GT75M M223 141/2 GTD85D M223 121/4 GTD85DH M223 16 M56 M223 121/4

Recommended rotary speed, rpm

31∕8–28 31∕8–28 31∕8–28 31∕8–28 57∕8, 6 31∕8–28 31∕8–28 61∕8 31∕8–28 31∕8–28 31∕8–28 31∕8–28 61∕8, 83/4 83/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 37∕8 31∕8–28 31∕8–28 6, 61∕8 121/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 81/2 81/2 81/2 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28

Recommended WOB, lb/in. diameter

M323 M123 M323 M223 M233 M233 M233 S233 M223 M223 M223 M223 S233 S223 M323 M323 M223 M223 M223 M223 M233 M233 M233 S233 S223 M233 M233 M233 M233 M233 M233 M233 M233 S233 S233 S233 S233 S233 S233 M223 M223 S233 S233 S233 S233 S233 S233 S233 S233 S233 S233 S233 S233 S233 S233 S233

Size range, in.

IADC code

Manufacturer, Bit name/model number QD506 QD604 QD605 QD606 T404 T406 T406F T504FS T505 T505F T506 T506F T604FS T604SX T605 T605F T606 T606F T806 T806F TD204 TD406 TD406F TD504FS TD504FSX TD505 TD505F TD506 TD506F TD605 TD605F TD606 TD606F T406 T406F T505 T505F T506 T506F TD603 TD604M TD604S T605 T605F T606 T606F TD406S TD406FS TD505S TD505FS TD506S TD506FS TD605S TD605FS TD606S TD606FS DB Bits D513

6, 61∕8

500–4,500

350–50

PL516

M223 77∕8, 81/2, 83/4

500–4,500

350–50

PL616

M223 77∕8, 81/2, 83/4

500–4,500

350–50

PLd513 PLd516 PLd516 PLd516 PLd719 PLs513 PLs513 PLs516 PLs516

M233 M123 M143 M223 M323 M223 M233 M123 M223

500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500

350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50

DGHMWUmV DGHMWUmV DGHMWUmV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV

500–4,500 500–4,500 500–4,500

350–50 350–50 350–50

GHMWIRstV GHMWIRstV GHMWIRstV

PLs516 PLs516 PLs616

77∕8, 81/2, 83/4 61∕8, 61/4, 83/4 81/2 77∕8, 81/2, 83/4 121/4 83/4 83/4, 97∕8 77∕8, 81/2, 83/4 61∕8, 77∕8, 81/2, 83/4, 91/2, 97∕8 M323 121/4 M423 121/4 M223 77∕8, 81/2, 83/4

60–400

HOXS616 M223 83/4, 105∕8

500–4,000

60–400

61∕8

500–4,500

60–400

M419

M121 83/4

400–3,000

60–400

M513

M223 41/2, 61∕8

500–4,000

60–400

M20

M516

M223 115∕8, 121/4

500–4,000

60–400

M519

M223 6, 121/4

400–3,000

60–400

M613

M333 51/2, 57∕8, 6, 61∕8

500–4,000

60–400

M616

M223 81/2, 91/4, 105∕8, 121/4 500–4,000

60–400

M619

121/4

400–3,000

60–400

M713

M333 57∕8, 61∕8

500–4,000

60–400

M716

M323 105∕8, 12, 16

500–4,000

60–400

M816

83∕8, 141/2, 16

500–4,000

60–400

M819

91/4

400–3,000

60–400

M916

M423 16

500–4,000

60–400

500–4,000

60–400

MA613

61∕8

MA616

M223 6, 6 ∕8, 81/2

500–4,000

60–400

MA619

M223 81/2, 181∕8

400–3,000

60–400

MA813

6

500–4,000

60–400

MA89

83∕8

500–4,000

60–400

MAI616

6

500–4,000

60–400

MASI513 M233 83/4

500–4,000

60–400

MASI613

83/4

500–4,000

60–400

MASI716

77∕8, 83/4

500–4,000

60–400

MASIZ513

83/4

500–4,000

60–400

MAX89

83∕8

500–4,000

60–400

MAZ616

81/2

500–4,000

60–400

MAZ89

83∕8

500–4,000

60–400

MCRIZ616

121/4

500–4,000

60–400

1

MD519

M223 81/2

400–3,000

60–400

MD611

63/4

500–4,500

60–400

500–4,000

60–400

MD616

M223 81/2, 121/4

MD713

81/2

500–4,000

60–400

MD716

12

500–4,000

60–400

MDA619

121/4

400–3,000

60–400

MDAI619

121/4

400–3,000

60–400

MDI313

81/2, 83/4

500–4,000

60–400

MDI319

81/2

400–3,000

60–400

MDI413

53/4, 6, 61∕8

500–4,000

60–400

MDI416

M123 61∕8, 81/2, 83/4

500–4,000

60–400

MDI419

M121 81/2, 83/4, 121/4

400–3,000

60–400

GHMNUmVW GHMNUmVW GHMNRstUhVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW

500–4,500

60–400

MDI513

M233 5 ∕8, 6, 6 ∕8, 61/4, 61/2, 65∕8, 63/4, 77∕8, 81/2, 85∕8, 83/4 M223 57∕8, 6, 61∕8, 61/2, 63/4, 77∕8, 83∕8, 81/2, 85∕8, 83/4, 97∕8, 105∕8, 115∕8, 121/4 M223 61∕8, 81/2, 83/4, 91/2, 97∕8, 103∕8, 121/4, 131/2, 143/4, 17, 171/2 6, 61∕8, 65∕8, 81/2, 83/4

500–4,000

60–400

500–4,000

60–400

MDI516

MDI519

MDI611

7

1

60–400

GHMNRstUlVW

500–4,500

60–400

GHMNRstUhVW GHMNRstUmVW

MDI711

500–4,500

60–400

MDI713

M333 5 ∕8, 5 ∕8, 6, 81/2

500–4,000

60–400

MDI716

M223 81/2, 105∕8, 111/2, 121/4, 141/2, 143/4, 16, 163∕8, 161/2, 171/2, 181∕8 61/2

500–4,000

60–400

MDI616

MDI619

MDI811 MDI813 MDI816 MDI916

5

7

M333 81/2, 121/4, 141/2, 143/4, 16, 161/2 M323 81/2, 121/4, 141/2, 171/2, 181∕8 171/2

500–4,000

500–4,000

400–3,000

500–4,500

60–400

60–400

60–400

60–400

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

MDIR613

61∕8

500–4,000

60–400

MDIZ413

6

500–4,000

60–400

MDIZ513

6 ∕8, 81/2

500–4,000

60–400

MDIZ516

61∕8, 81/2, 83/4, 121/4

500–4,000

60–400

MDIZ519

81/2, 121/4

400–3,000

60–400

MDIZ613

6, 61∕8, 63/4, 83/4

500–4,000

60–400

1

MDIZ616

81/2, 121/4

500–4,000

60–400

MDIZ619

121/4

400–3,000

60–400

MDIZ713

81/2

500–4,000

60–400

MDIZ716

81/2, 121/4, 143/4

500–4,000

60–400

MDS616

143/4

500–4,000

60–400

MDS713

5

5 ∕8

500–4,000

60–400

MDSI413

63/4

500–4,000

60–400

500–4,000

60–400

57∕8, 6, 61∕8, 63/4, 81/2 500–4,000

60–400

6, 61∕8, 63/4, 77∕8, 500–4,000 81/2, 85∕8, 83/4, 115∕8, 121/4 MDSI519 M123 81/2, 83/4, 9, 91/2, 400–3,000 121/4, 143/4, 171/2 MDSI611 83/4 500–4,500

60–400

500–4,000 MDSI613 M333 53/4, 57∕8, 6, 61∕8, 61/4, 63/4, 77∕8, 81/2, 83/4, 91/2, 97∕8, 105∕8, 121/4 MDSI616 M222 77∕8, 83∕8, 81/2, 85∕8, 500–4,000 83/4, 91/4, 97∕8, 105∕8, 115∕8, 12, 121/4, 131∕8, 131/2, 141/2, 143/4, 16, 171/2, 181/2 MDSI619 M223 81/2, 83/4, 121/4, 143/4 400–3,000

60–400

MDSI416 M123 81/2, 97∕8, 121/4 MDSI513

GHMNRstUmVW

400–3,000

M333 5, 51/4, 55∕8, 53/4, 5 7/8, 6, 61∕8, 61/4, 61/2, 63/4, 75∕8, 77∕8, 81/2, 85∕8, 83/4, 91/2, 97∕8, 115∕8 M323 6, 77∕8, 81/4, 83∕8, 81/2, 83/4, 91/4, 91/2, 97∕8, 101/2, 105∕8, 115∕8, 12, 121/4, 131/2, 141/2, 143/4, 16, 17, 171/2, 181/4 M223 81/2, 97∕8, 121/4, 131/2, 141/2, 143/4, 16, 163∕8, 161/2, 171/2 M333 6, 61∕8, 63/4, 83/4

MDI613

GHMNRstUhVW GHMNRstUmVW

MDSI516

60–400 60–400

60–400

60–400

MDSI711

6, 61/4, 81/2, 83/4

500–4,500

60–400

MDSI713

53/4, 57∕8, 6, 61∕8, 7, 77∕8, 83∕8, 81/2, 85∕8, 83/4, 97∕8, 121/4

500–4,000

60–400

GHMNRstUmVW

GHMNRstUlVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW

GHMNRstUlVW GHMNRstUhVW GHMNRstUmVW

GHMNRstUmVW

500–4,500

60–400

MDSI813 M333 83∕8, 81/2, 83/4, 101/4, 500–4,000 105∕8, 121/4, 143/4 MDSI816 81/2, 97∕8, 115∕8, 121/4, 500–4,000 171/2, 181∕8, 181/2 MDSI913 81/2, 83/4 500–4,000

60–400

GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

IADC code

MDSI716 M223 83∕8, 81/2, 85∕8, 83/4, 91/2, 97∕8, 101/4, 103∕8, 105∕8, 115∕8, 121/4, 131∕8, 143/4, 16, 161/2, 171/2, 181∕8 MDSI811 61/2

60–400 60–400

MDSI916

83/4

500–4,000

60–400

MDSIR513

65∕8

500–4,000

60–400

MDSIR516

63/4, 81/2, 121/4

500–4,000

60–400

MDSIR613

60–400

MDSIR616

57∕8, 6, 61∕8, 61/4, 65∕8, 500–4,000 83/4, 131/2 81/2, 83/4 500–4,000

MDSIR713

6, 61∕8, 63/4, 81/2

500–4,000

60–400

MDSIR716

61∕8

500–4,000

60–400

MDSIR813

60–400

MDSIR816

81/2, 85∕8, 83/4, 105∕8, 500–4,000 121/4, 143/4 500–4,000 97∕8, 181/2

60–400

MDSIZ513

57∕8, 61∕8

500–4,000

60–400

MDSIZ516

500–4,000

60–400

MDSIZ519

6, 81/2, 85∕8, 83/4, 91/2, 121/4 81/2, 121/4, 143/4

400–3,000

60–400

MDSIZ613

53/4, 6, 61∕8, 81/2

500–4,000

60–400

MDSIZ616

500–4,000

60–400

MDSIZ619

83∕8, 81/2, 85∕8, 83/4, 121/4 121/4

400–3,000

60–400

MDSIZ713

57∕8, 81/2, 121/4

500–4,000

60–400

MDSIZ716

60–400

MDSIZ811

81/2, 91/2, 105∕8, 121/4, 500–4,000 123∕8 61/2 500–4,500

MDSIZ813

121/4

500–4,000

60–400

MDSIZ816

81/2, 121/4

500–4,000

60–400

MDSIZR816 MDSXI613

121/4

500–4,000

60–400

81/2

500–4,000

60–400

MDSXI616

121/4

500–4,000

60–400

MDSXI713

81/2

500–4,000

60–400

MDSXI716

121/4, 181∕8

500–4,000

60–400

MDSXI813

81/2

500–4,000

60–400

MDSXIZ713 MDSXIZ716 MDX516

81/2

500–4,000

60–400

81/2

500–4,000

60–400

81/2

500–4,000

60–400

MDX613

61∕8

500–4,000

60–400

MDXI616

121/4

500–4,000

60–400

MDXI713

81/2

500–4,000

60–400

MDZI513

61∕8

500–4,000

60–400

MDZI516

77∕8, 81/2, 83/4

500–4,000

60–400

MDZI613

6, 61∕8, 61/2, 83/4

500–4,000

60–400

MDZI616

7 ∕8, 81/2, 83/4, 141/2

500–4,000

60–400

MDZI713

83/4, 105∕8

500–4,000

60–400

MDZI716

121/4

500–4,000

60–400

MDZI813

83/4

500–4,000

60–400

MDZIR813

83∕8

500–4,000

60–400

MDZIZ513

6

500–4,000

60–400

MDZIZ616

81/2, 85∕8

500–4,000

60–400

7

60–400

60–400

Special features/ usage

60–400

Size range, in.

500–4,000

Manufacturer, Bit name/model number

Recommended rotary speed, rpm

500–4,000

6, 61∕8, 63/4

Recommended WOB, lb/in. diameter

83/4, 105∕8

MDI511

Special features/ usage

GHMWUm GHMWUmVRst

Recommended rotary speed, rpm

3,000–3,500 80–200 1,000–6,000 Variable

Recommended WOB, lb/in. diameter

57∕8, 121∕4 6, 61∕8, 81/2

Size range, in.

Special features/ usage GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV

IADC code

Recommended rotary speed, rpm 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50

Manufacturer, Bit name/model number

Recommended WOB, lb/in. diameter 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500

Size range, in. 105∕8, 11, 121/4 83/4 121/4 77∕8 77∕8, 81/2, 83/4 105∕8, 11, 121/4 83/4 97∕8 77∕8, 81/2, 83/4

IADC code

Manufacturer, Bit name/model number

PLs616 M323 PLs619 M223 PLs619 M323 PLt416 M323 PLt516 M223 PLt516 M423 PLt519 M223 PLt616 M143 PLt616 M223 ReedHycalog Bits ST1013 S132 TK53 M232, S232 Smith Bits HOX616 M223

World Oil® / JANUARY 2017 D-15

60–400

IADC code

MDZXI713

81/2

500–4,000

60–400

MDZXIZ713

81/2, 105∕8

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

MI316 MI413

M123 83∕8, 81/2 61∕8, 61/4, 61/2

MI416

1

M123 6 ∕8

500–4,000

60–400

MI513

M223 43∕8, 61∕8, 61/4

500–4,000

60–400

MI516

M123 6, 61∕8, 61/4, 61/2, 71/2, 77∕8, 81/2, 83/4, 121/4 M123 61∕8, 77∕8, 81/2, 83/4, 97∕8, 121/4 M233 6, 61∕8, 61/4, 65∕8, 63/4, 77∕8, 83/4, 121/4 M323 61/4, 77∕8, 81/2, 83/4, 97∕8, 105∕8, 11, 121/4, 131∕8, 131/2 M223 11, 121/4, 17

500–4,000

60–400

400–3,000

60–400

500–4,000

60–400

500–4,000

60–400

400–3,000

60–400

MI519 MI613 MI616 MI619 MI622

400–3,000

60–400

MI711

M333 6

121/4

500–4,500

60–400

MI716

60–400

MI813

M223 53∕8, 57∕8, 6, 77∕8, 81/2, 500–4,000 97∕8, 121/4, 143/4 M333 61/2, 81/2, 85∕8, 121/4 500–4,000

60–400

MI913

M433 81/2, 85∕8, 115∕8

500–4,000

60–400

MI916

16

500–4,000

60–400

MIR616

61/4

500–4,000

60–400

MIR916

16

500–4,000

60–400

MIZ516

83/4

500–4,000

60–400

MIZ613

61/2

500–4,000

60–400

MIZ616

121/4, 16

500–4,000

60–400

MIZ716

81/2

500–4,000

60–400

MIZ813

85∕8

500–4,000

60–400

MR613

57∕8

500–4,000

60–400

MS413

61∕8

500–4,000

60–400

MS419

83/4, 143/4

400–3,000

60–400

MS516

81/2

500–4,000

60–400

MS519

161/2

400–3,000

60–400

MS613

57∕8

500–4,000

60–400

MS616

83∕8, 81/2, 121/4, 16

500–4,000

60–400

MS713

57∕8, 121/4

500–4,000

60–400

MS816

83∕8

500–4,000

60–400

MSI413

6, 63/4

500–4,000

60–400

MSI416

M221 61∕8, 63/4, 77∕8, 83/4

500–4,000

60–400

MSI513

M333 61∕8, 61/4, 83/4

500–4,000

60–400

MSI516

M323 61∕8, 61/2, 77∕8, 81/2, 83/4, 91/2, 97∕8, 105∕8, 121/4 M223 77∕8, 81/2, 83/4, 97∕8, 121/4 M433 6, 61∕8, 61/4, 61/2, 65∕8, 63/4, 77∕8, 81/2, 83/4, 121/4 M433 6, 61∕8, 77∕8, 81/2, 83/4, 91/2, 97∕8, 105∕8, 121/4, 131∕8, 131/2, 16, 161/2, 171/2 77∕8, 83∕8, 81/2, 83/4, 121/4, 171/2 M433 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4

500–4,000

60–400

MSI519 MSI613 MSI616

MSI619 MSI711

400–3,000

60–400

500–4,000

60–400

500–4,000

400–3,000 500–4,500

D-16 2017 Drill Bit Classifier

60–400

60–400 60–400

GHMNRstUlVW GHMNRstUlVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUhVW

MSI719 MSI813 MSI816 MSI916

M433 6, 61∕8, 81/2, 83/4, 97∕8, 121/4 M432 83∕8, 81/2, 97∕8, 121/4, 16 16

GHMNRstUmVW

400–3,000

60–400

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW DGHMNRstUmVW DGHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW

MSIR513

61∕8

500–4,000

60–400

MSIR613

6, 61∕8, 61/4, 61/2

500–4,000

60–400

MSIR616

97∕8

500–4,000

60–400

MSIR713

61∕8, 81/2

500–4,000

60–400

MSIZ413

63/4

500–4,000

60–400

MSIZ513

61/4

500–4,000

60–400

MSIZ516 MSIZ519 MSIZ613 MSIZ616 MSIZ619 MSIZ713 MSIZ716

81/2, 83/4 81/2, 83/4, 121/4 61∕8, 63/4 81/2, 83/4, 121/4, 16 121/4

500–4,000 400–3,000 500–4,000 500–4,000 400–3,000

81/2

500–4,000

81/2, 12, 121/4

500–4,000

60–400 60–400 60–400 60–400 60–400 60–400 60–400

MSIZ813

81/2, 83/4

500–4,000

60–400

MSIZ816

16

500–4,000

60–400

MST913

57∕8, 83∕8, 81/2

500–4,000

60–400

MSXI613

6, 81/2

500–4,000

60–400

MSXI616

81/2

500–4,000

60–400

MSXI619

121/4

400–3,000

60–400

MSXI713

6

500–4,000

60–400

MSXI716

81/2, 121/4

500–4,000

60–400

MSXIZ616

81/2

500–4,000

60–400

MSZ713

57∕8

500–4,000

60–400

MSZ716

12

500–4,000

60–400

MSZIZ813

81/2

500–4,000

60–400

MV616

61/4

500–4,000

60–400

MV716

M323 83/4

500–4,000

60–400

MZ616

81/2, 121/4, 16

500–4,000

60–400

MZ713

57∕8

500–4,000

60–400

MZ716

12

MZI616

9 ∕8, 10 ∕8, 121/4 7

500–4,000 5

500–4,000

60–400 60–400

MZI619

83/4

400–3,000

60–400

MZI716

97∕8, 16, 171/2

500–4,000

60–400

MZI813

81/2

500–4,000

60–400

MZIR813

81/2

500–4,000

60–400

MZIZ519

121/4

400–3,000

60–400

MZR813

83∕8

500–4,000

60–400

MZSI613

77∕8

500–4,000

60–400

MZSI716

81/2

500–4,000

60–400

MZXIR813

81/2

500–4,000

R35Y

57∕8, 83∕8

500–4,000

60–400 60–400

R513

61∕8, 63/4

500–4,000

60–400

R616

500–4,000

60–400

500–4,000

60–400

61/4, 81/2, 83/4, 97∕8, 131/2 63/4

500–4,000

60–400

R713

500–4,000

60–400

R716

6 ∕8, 6 ∕8, 8 ∕8, 121/4

500–4,000

60–400

R813

81/2, 83/4, 143/4

500–4,000

60–400

R816

81/2, 85∕8, 97∕8, 105∕8, 500–4,000 143/4 33/4 500–4,000

60–400

S413

1

5

5

60–400

S516

S123 17

500–4,000

60–400

S519

S123 81/2, 91/2, 101/2, 105∕8, 400–3,000 121/4, 131/2, 143/4, 17, 171/2, 24 S223 17 400–3,000

60–400

S619

60–400

Special features/ usage

500–4,000

60–400

61∕8, 61/4, 81/2, 83/4, 91/2 6, 61∕8, 61/4, 83/4

Recommended rotary speed, rpm

121/4

500–4,000

Recommended WOB, lb/in. diameter

MDZSI816

MSI716

R613

Size range, in.

60–400

R516

IADC code

500–4,000

GHMNRstUmVW

Manufacturer, Bit name/model number

81/2, 85∕8

60–400

Special features/ usage

MDZSI813

500–4,000

Recommended rotary speed, rpm

60–400

M433 6, 61∕8, 61/4, 61/2, 63/4, 81/2, 83/4, 97∕8, 105∕8, 121/4 M433 71/2, 77∕8, 83∕8, 81/2, 83/4, 97∕8, 121/4, 16, 171/2 83/4, 121/4

Recommended WOB, lb/in. diameter

500–4,000

Size range, in.

6

MSI713

IADC code

MDZSI513

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW

Manufacturer, Bit name/model number

Recommended rotary speed, rpm 60–400

Special features/ usage

Recommended WOB, lb/in. diameter 500–4,000

Size range, in. 115∕8, 121/4

Manufacturer, Bit name/model number MDZIZ716

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW

S919

22

500–4,000

60–400

SD516

115∕8

500–4,000

60–400

SDAI513

81/2

500–4,000

60–400

SDI313

81/2, 83/4

500–4,000

60–400

SDI413

6 ∕8

500–4,000

60–400

SDI416

61∕8, 77∕8

500–4,000

60–400

SDI419

81/2, 121/4, 171/2

400–3,000

60–400

SDI511

61/4, 63/4

500–4,500

60–400

500–4,000

60–400

500–4,000

60–400

400–3,000

60–400

GHMNRstUlVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW

SDI513 SDI516 SDI519 SDI611 SDI613 SDI616 SDI619 SDI711

1

6, 61∕8, 61/4, 61/2, 63/4, 77∕8, 81/2, 85∕8, 83/4 6, 61∕8, 63/4, 77∕8, 81/2, 85∕8, 83/4, 97∕8, 115∕8, 121/4, 171/2 S123 81/2, 83/4, 121/4, 151/2, 16, 161/2, 17, 171/2, 181/2 6, 61/4, 63/4, 77∕8, 81/2, 83/4, 97∕8 6, 61∕8, 63/4, 81/2, 83/4

500–4,500

60–400

500–4,000

60–400

S223 81/2, 83/4, 121/4, 131/2, 500–4,000 143/4, 16, 171/2, 181/2 121/4, 131/2, 143/4, 400–3,000 16, 171/2 6, 6 1/8, 61/4, 63/4 500–4,500

60–400 60–400 60–400

81/2, 161/2, 171/2, 181∕8 171/2, 181∕8, 26

500–4,000

60–400

SDI816

500–4,000

60–400

SDIZ419

121/4

400–3,000

60–400

SDIZ513

61∕8, 81/2

500–4,000

60–400

SDIZ516

81/2

500–4,000

60–400

SDIZ519

121/4, 143/4

400–3,000

60–400

SDIZ611

83/4

500–4,500

60–400

SDIZ619

81/2

400–3,000

60–400

SDSI413

81/2

500–4,000

60–400

500–4,000

60–400

SDI716

SDSI516 SDSI519

6, 81/2, 83/4, 11 ∕8, 121/4 S423 81/2, 121/4, 143/4, 16, 171/2 61∕8 5

400–3,000

60–400

500–4,000

60–400

500–4,000

60–400

SDSI619

81/2, 115∕8, 121/4, 131/2, 16 121/4

400–3,000

60–400

SDSI713

81/2

500–4,000

60–400

SDSI716

121/4, 171/2, 195∕8

500–4,000

60–400

SDSI613 SDSI616

SDSIZ616

121/4

500–4,000

60–400

SDSXI619

121/4

400–3,000

60–400

SDXI516

81/2

400–3,000

60–400

SDXI519

81/2, 171/2

400–3,000

60–400

GHMNRstUlVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUhVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUlVW GHMNRstUlVW

400–3,000

60–400

71/2, 91/2, 105∕8, 115∕8, 121/4, 13 1/8 S123 81/2, 97∕8, 121/4, 141/2, 151/2, 20 77∕8, 81/2, 105∕8, 121/4, 133/4, 16 S223 121/4, 131/2, 171/2

500–4,000

60–400

400–3,000

60–400

500–4,000

60–400

SI519 SI616 SI619

IADC code

400–3,000

60–400

SI819

181/2, 23

400–3,000

60–400

SI913

16

500–4,000

60–400

SI916

83/4, 121/4, 24

500–4,000

60–400

SI919

22

400–3,000

60–400

SIZ516

83/4

500–4,000

60–400

SIZ616

81/2

500–4,000

60–400

SIZ716

121/4

500–4,000

60–400

SPSI616

171/2

500–4,000

60–400

SSI513

6 ∕8

500–4,000

60–400

SSI516

97∕8, 121/4

500–4,000

60–400

SSI616

121/4, 151/2, 171/2

500–4,000

60–400

SSI619

171/2, 20, 23, 24, 26 400–3,000

60–400

SSI716

121/4, 171/2

500–4,000

60–400

SSI819

20

400–3,000

60–400

SSI916

22

500–4,000

60–400

SSIZ516

121/4

500–4,000

60–400

SSIZ616

16

500–4,000

60–400

SST1213

121/4

500–4,000

60–400

SST913

81/2

500–4,000

60–400

SSXI616

121/4

500–4,000

60–400

SSXI619

121/4

400–3,000

60–400

SXI616

81/2, 121/4

500–4,000

60–400

SXI619

121/4

400–3,000

60–400

SXIZ616

81/2

500–4,000

60–400

SZI516

131∕8

500–4,000

60–400

TBRS613

500–4,000

60–400

VIS416

57∕8, 6, 61∕8, 63/4, 77∕8, 83∕8, 81/2, 83/4, 97∕8, 105∕8 81/2

500–4,000

60–400

VIS419

81/2, 121/4

400–3,000

60–400

VIS516

81/2, 121/4

500–4,000

60–400

VIS519

81/2, 121/4

400–3,000

60–400

VIS613

85∕8

500–4,000

60–400

X516

6, 61∕8, 77∕8, 81/2, 83/4 500–4,000

60–400

X616

81/2, 121/4, 171/2

500–4,000

60–400

X716

121/4, 161/2

500–4,000

60–400

XS516

97∕8

500–4,000

60–400

XS616

500–4,000

60–400

XS716

81/2, 85∕8, 83/4, 12, 121/4 121/4

500–4,000

60–400

XZ616

85∕8, 171/2

500–4,000

60–400

Z316

77∕8

500–4,000

60–400

1

GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

60–400

Z5

81/2

500–4,000

60–400

Z513

57∕8, 6, 61∕8, 63/4

500–4,000

60–400

Z516

5 ∕8, 6, 7 ∕8, 81/2, 83/4, 500–4,000 115∕8, 121/4 77∕8, 81/2, 121/4 400–3,000

60–400

7

Z519

7

6, 61∕8, 61/4, 77∕8, 81/2, 83/4 53∕8, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 77∕8, 81/2, 83/4 77∕8, 81/2, 85∕8, 83/4, 91/2, 105∕8, 121/4, 141/2, 16, 171/2, 181∕8 83/4, 97∕8, 121/4, 143/4, 23 83∕8, 81/2, 83/4, 105∕8, 171/2 81/2, 91/2, 97∕8, 121/4, 131∕8, 16, 171/2 81/2, 121/4

60–400

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

GHMNRstUmVW

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

60–400

Z916

81/2, 85∕8, 83/4, 121/4, 500–4,000 171/2 500–4,000 81/2, 115∕8, 121/4, 171/2 83/4 500–4,000

ZR616

81/2, 83/4

500–4,000

60–400

ZR713

83∕8

500–4,000

60–400

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

Z6 Z613 Z616

Z619 Z713 Z716 Z8 Z813 Z816

60–400

60–400

ZR813

83∕8, 81/2

500–4,000

60–400

ZR816

105∕8, 121/4

500–4,000

60–400

S974 S545 S544 S316 S645

41/2–121/4 57∕8–171/2 6–171/2 77∕8–171/2 6–171/2

500–3,000 1,000–4,000 1,000–3,000 1,000–4,000 1,000–4,000

100–400 85–250 85–250 85–250 85–300

GHM DGM DG DGM GM

M142 M142 M143 M143 M242 M242 M243 M243 M142 M142 M143 M143 M242 M242 M243 M243 M132 M132 M133 M133 M232 M232 M233 M233 M122 M122 M123 M123 M222 M222 M223 M223 M222 M222 M223 M223 M142 M142

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU

Tri–Max HZ–90 Q–1 Q–1L S–1H S645 Ulterra U309M U309M CF U309M U309M CF U309M U309M CF U309M U309M CF U409M U409M CF U409M U409M CF U409M U409M CF U409M U409M CF U413M U413M CF U413M U413M CF U413M U413M CF U413M U413M CF U416M U416M CF U416M U416M CF U416M U416M CF U416M U416M CF U419M U419M CF U419M U419M CF U509M U509M CF

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2

Special features/ usage

6 ∕8, 81/2, 83/4

SI516

500–4,000

M143 M143 M242 M242 M243 M243 M132 M132 M133 M133 M232 M232 M233 M233 M332 M332 M333 M333 M432 M432 M433 M433 M122 M122 M123 M123 M222 M222 M223 M223 M322 M322 M323 M323 M422 M422 M423 M423 M222 M222 M223 M223 M322 M322 M323 M323 M422 M422 M423 M423 M142 M142 M143 M143 M242 M242 M243 M243 M132 M132 M133 M133 M232 M232 M233 M233 M332 M332 M333 M333 M432 M432 M433 M433 M122 M122 M123 M123 M222

Recommended rotary speed, rpm

SI419

1

6, 81/2

U509M U509M CF U509M U509M CF U509M U509M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U616M U616M CF U616M U616M CF U616M

Recommended WOB, lb/in. diameter

60–400

Z416

GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW

Size range, in.

60–400

500–4,000

60–400

IADC code

500–4,000

61∕8, 81/2

400–3,000

Manufacturer, Bit name/model number

71/2

SI416

81/2, 83/4, 16

Special features/ usage

SHOI513

Recommended rotary speed, rpm

60–400

Recommended WOB, lb/in. diameter

500–4,000

Size range, in.

171/2

Z319

IADC code

SDZIZ616

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

Manufacturer, Bit name/model number

Recommended rotary speed, rpm 60–400

Special features/ usage

Recommended WOB, lb/in. diameter 500–4,000

Size range, in. 81/2

Manufacturer, Bit name/model number SDXIZ513

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU

World Oil® / JANUARY 2017 D-17

D-18 2017 Drill Bit Classifier

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU

U619S FB U619S CF U619S FB U619S CF U619S FB Varel V416

V516

V616

V419

V519

V619

R416

R516

R616

R419

R519

R619

50–400 50–400 50–400 50–400 50–400

BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU

M233, 41∕8, 55∕8, 6, 61∕8, 500–3,000 S233 61/4, 61/2, 75∕8, 77∕8, 81/2, 85∕8, 97∕8, 121/4, 16, 171/2 M323, 6, 61∕8, 61/4, 61/2, 63/4, 500–3,000 S323 75∕8, 77∕8, 81/2, 85∕8, 83/4, 97∕8, 105∕8, 11, 115∕8, 121/4, 131∕8 500–3,000 M223, 6, 61∕8, 61/4, 61/2, S223   63/4, 75∕8, 77∕8, 83∕8, 81/2, 85∕8, 83/4, 91/2, 97∕8, 105∕8, 11, 12, 115∕8, 113/4, 121/4, 131∕8, 141/2, 143/4, 151/2, 16, 17, 171/2, 23, 26 500–3,000 M223, 6, 71/2, 77∕8, 81/2, S223   85∕8, 83/4, 97∕8, 105∕8, 115∕8, 121/4, 17, 171/2 M223, 77∕8, 83∕8, 81/2, 83/4, 500–3,000 S223   97∕8, 105∕8, 115∕8, 121/4, 131/2, 143/4, 151/2, 16, 17, 171/2 M233, 77∕8, 83∕8, 81/2, 83/4, 500–3,000 S233 97∕8, 105∕8, 115∕8, 121/4, 131/2, 143/4, 151/2, 16, 17, 171/2, 181/2, 26 M233, 41∕8, 55∕8, 6, 61∕8, S233 61/4, 61/2, 75∕8, 77∕8, 81/2, 85∕8, 97∕8, 121/4, 16, 171/2 M323, 6, 61∕8, 61/4, 61/2, 63/4, S323 75∕8, 77∕8, 81/2, 85∕8, 83/4, 97∕8, 105∕8, 11, 115∕8, 121/4, 131∕8 M223, 6, 61∕8, 61/4, 61/2, S223   63/4, 75∕8, 77∕8, 83∕8, 81/2, 85∕8, 83/4, 91/2, 97∕8, 105∕8, 11, 12, 115∕8, 113/4, 121/4, 131∕8, 141/2, 143/4, 151/2, 16, 17, 171/2, 23, 26 500–3,000 M323, 6, 71/2, 77∕8, 81/2, S323 85∕8, 83/4, 97∕8, 105∕8, 115∕8, 121/4, 17, 171/2 M323, 77∕8, 83∕8, 81/2, 83/4, 500–3,000 S323 97∕8, 105∕8, 115∕8, 121/4, 131/2, 143/4, 151/2, 16, 17, 171/2 M223, 77∕8, 83∕8, 81/2, 83/4, 500–3,000 S223   97∕8, 105∕8, 115∕8, 121/4, 131/2, 143/4, 151/2, 16, 17, 171/2, 181/2, 26 Hybrid bits

50–400

BGTPDG1G2G3LHNOUXR

50–400

BGTPDG1G2G3LHNOUXR

50–400

BGTPDG1G2G3LHNOUXR

50–400

BGTPDG1G2G3LHNOUXR

50–400

BGTPDG1G2G3LHNOUXR

50–400

BGTPDG1G2G3LHNOUXR

Size range, in.

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

Special features/ usage

23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Recommended rotary speed, rpm

S432 S432 S433 S433 S122 S122 S123 S123 S222 S222 S223 S223 S322 S322 S323 S323 S422 S422 S423 S423 S222 S222 S223 S223 S322 S322 S323 S323 S422 S422 S423 S423 S142 S142 S143 S143 S242 S242 S243 S243 S132 S132 S133 S133 S232 S232 S233 S233 S332 S332 S333 S333 S432 S432 S433 S433 S122 S122 S123 S123 S222 S222 S223 S223 S322 S322 S323 S323 S422 S422 S423 S423 S222 S222 S223 S223 S322 S322 S323

Recommended WOB, lb/in. diameter

U513S CF U513S FB U513S CF U513S FB U516S CF U516S FB U516S CF U516S FB U516S CF U516S FB U516S CF U516S FB U516S CF U516S FB U516S CF U516S FB U516S CF U516S FB U516S CF U516S FB U519S CF U519S FB U519S CF U519S FB U519S CF U519S FB U519S CF U519S FB U519S CF U519S FB U519S CF U519S FB U609S CF U609S FB U609S CF U609S FB U609S CF U609S FB U609S CF U609S FB U613S CF U613S FB U613S CF U613S FB U613S CF U613S FB U613S CF U613S FB U613S CF U613S FB U613S CF U613S FB U613S CF U613S FB U613S CF U613S FB U616S CF U616S FB U616S CF U616S FB U616S CF U616S FB U616S CF U616S FB U616S CF U616S FB U616S CF U616S FB U616S CF U616S FB U616S CF U616S FB U619S CF U619S FB U619S CF U619S FB U619S CF U619S FB U619S CF

Recommended WOB, lb/in. diameter

BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCEFGSU

Size range, in.

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

IADC code

Special features/ usage

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

Manufacturer, Bit name/model number

Recommended rotary speed, rpm

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Recommended WOB, lb/in. diameter

M222 M223 M223 M322 M322 M323 M323 M422 M422 M423 M423 M222 M222 M223 M223 M322 M322 M323 M323 M422 M422 M423 M423 S142 S142 S143 S143 S242 S242 S243 S243 S142 S142 S143 S143 S242 S242 S243 S243 S132 S132 S133 S133 S232 S232 S233 S233 S122 S122 S123 S123 S222 S222 S223 S223 S222 S222 S223 S223 S142 S142 S143 S143 S242 S242 S243 S243 S132 S132 S133 S133 S232 S232 S233 S233 S332 S332 S333 S333

Size range, in.

IADC code

Manufacturer, Bit name/model number U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U619M U619M CF U619M U619M CF U619M U619M CF U619M U619M CF U619M U619M CF U619M U619M CF U309S CF U309S FB U309S CF U309S FB U309S CF U309S FB U309S CF U309S FB U409S CF U409S FB U409S CF U409S FB U409S CF U409S FB U409S CF U409S FB U413S CF U413S FB U413S CF U413S FB U413S CF U413S FB U413S CF U413S FB U416S CF U416S FB U416S CF U416S FB U416S CF U416S FB U416S CF U416S FB U419S CF U419S FB U419S CF U419S FB U509S CF U509S FB U509S CF U509S FB U509S CF U509S FB U509S CF U509S FB U513S CF U513S FB U513S CF U513S FB U513S CF U513S FB U513S CF U513S FB U513S CF U513S FB U513S CF U513S FB

S323 S422 S422 S423 S423

Tri–Max EWD DTS

Atlas Copcp S313BCRU S413BCRU S513BCRU S416BCRU Drill Master, Inc. MBC19919 M424 ReedHycalog Bits CSD5213 S233 CSD5208 CSD5311 CSD5313 PSD4313 PSD4316 PSD4319 SB4208 S443 SR3108 S133 SR3208 S143 SR3408 M243 SR3611

23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

BGTPDG1G2G3LHNOUXR BGTPDG1G2G3LHNOUXR BGTPDG1G2G3LHNOUXR

50–400

BGTPDG1G2G3LHNOUXR

50–400

BGTPDG1G2G3LHNOUXR

50–400

BGTPDG1G2G3LHNOUXR

43∕8×6, 6×71/4, 81/2×97∕8, 105∕8×123/4, 121/4×143/4, 143/4×171/2, 171/2×23 Bi–center PDC drill bits

Underream while drilling

43/4×7 43/4×71/4 43/4×73/4 61/2×97∕8

400–4,000 400–4,000 400–4,000 400–4,000

60–400 60–400 60–400 60–400

121∕2×105∕8

200–1,700

60–400

RSTMWUm

6 ∕2×7 ∕2 43∕4×55∕8 61∕2×71∕2 81∕2×97∕8 81∕2×91∕2, 97∕8×103∕4 81∕2×91∕2 81∕2×9, 81∕2×91∕2 53∕4×61∕2, 6×7 55∕8×63∕4 41∕8×5 23∕4×3 33∕4×41/4

3,000–3,500 3,000–3,500 3,000–3,500 3,000–3,500 3,000–3,500 3,000–3,500 3,000–3,500 3,000–3,500 3,000–3,500 3,000–3,500 3,000–3,500 3,000–3,500

80–200 80–200 80–200 80–200 80–200 80–200 80–200 80–200 80–200 80–200 80–200 80–200

GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm

1

1

7

200–3,000

60–400

IADC code

QDMI5219

131∕8

200–3,000

60–400

QDMSI4216 QDS4213

91/2

200–3,000

60–400

7

200–3,500

60–400

QDS5216

97∕8, 113/4, 121/4

200–3,000

60–400

QDS7313 S333 131/2

200–3,500

60–400

QDSI4219

91/2

200–3,000

60–400

QDSI5216

113/4, 143/4, 171/2

200–3,000

60–400

QDSI5316

91/2

200–3,000

60–400

QDSI6213

61/4

200–3,500

60–400

SHO716

16, 16 ∕8, 161/2

200–3,000

60–400

3

SHOI516

171/2

200–3,000

60–400

SHOI616

105∕8, 143/4, 16

200–3,000

60–400

SHOS616

171/2, 18

200–3,000

60–400

SHOSI616

121/4, 171/2

200–3,000

60–400

Varel VH719

M423 81/2×9, 121/4×131/2, 500–2,500

VH816

S323 17×22

VH819

S323 143/4×173/4, 17×19, 500–2,500 21×22 Bi–center PDC drill bits

500–2,500

Varel VH719

M423 81/2×9, 121/4×131/2, 500–2,500

VH816

S323 17×22

VH819

S323 143/4×173/4, 17×19, 500–2,500 21×22 PDC coring bits

Bit–Tech CP–440– M232 77∕8, 81∕2, 83∕4 BU CP–440– M342 6, 61∕8 BU Dowdco Coring CP–128 M–442 55∕8×25∕8, 61∕8×25∕8, 61/2×25∕8, 61∕8×3, 61/4×3, 61/2×3, 63/4×3, 727∕32×4, 81/2×4, 823∕32×4, 927∕32×4 CP–813 M–133 77∕8×4, 81/4×4, 81/2×4, 83/4×4 Halliburton CD93 M233 6–121∕4 FC3643 M343 81∕2–121∕4 FC3643 M343 81∕2–121∕4 FC3647 M343 81∕2–121∕4 FC3737 M343 81∕2 FC3743 M233 71∕2–121∕4 FC3747 M432 81∕2 FC3843 M233 71∕2–121∕4 FC3847 M432 81∕2 FC3937 M432 81∕2 ReedHycalog Bits CCP711 S132,  55∕8,  61∕4,  61∕2,   S232, 63∕4,  83∕4 S332 CCP713 S133,  61∕4,  61∕2,  63∕4,   S232, 63∕4,  77∕8,  83∕4 S332 CCP813 S332  81∕2,  97∕8 CDP713 S232,  57∕8,  83∕4 S333 CEP616 S223,  77∕8,  81/2,  81/2,  83∕4 S322, S323

500–2,500

300–2,000 300–2,000

100–400 BGDHNOUXR 100–400 BGDHNOUXR 100–400 BGDHNOUXR

100–400 BGDHNOUXR 100–400 BGDHNOUXR 100–400 BGDHNOUXR

50–500

AFGMVW

50–500

AFGMVW

2,000–5,500 50–150

FGMRUm

2,000–5,500 50–150

FGMRUm

250–3,500 250–3,500 250–2,000 250–3,500 250–2,000 250–3,500 250–2,000 250–3,500 250–2,000 250–2,000

80–140 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150

F F F F F F F F F F

300–2,000

50–150

GUl

300–2,000

50–150

300–2,000 300–2,000 300–2,000

GUl

300–2,000 300–2,000 300–2,000

50–150 50–150 50–150

M232 77∕8, 81∕2 1,000–3,000 50–400 Surface set diamond coring bits

Bit–Tech CG–300 M623 6, 61∕8, 61∕4, 77∕8, 83∕4, 400–2,500 CN–332 M713 61∕8, 63∕16, 61∕4, 400–2,500 77∕8, 83∕4 CN–402 M712 6, 61∕8, 61∕4, 77∕8, 83∕4 400–2,500 Halliburton CT103 M613 6–121∕4 250–3,500 CT103UF M423 81∕2–121∕4 250–3,500 Surface set diamond bits Bit–Tech DN–302 M713 41∕2–43∕4, 51∕2–61∕2 DN–332 M713 41∕2–43∕4, 51∕2–63∕4 DN–422 M712 13∕4, 17∕8, 21∕8, 21∕4, 27∕16, 35∕8, 41∕2, 43∕4, 6, 61∕8, 61∕4, 61∕2, 63∕4

300–3,500 300–3,500 300–3,500

GUl GUl GUl G

50–500 60–120

AGIKM AGMR

50–500

AGKM

80–140 80–140

I FI

Variable Variable 60–600

Custom Custom ADGHMNR

Medium

Steel tooth roller cone bits Baker Hughes RC211 211 RC215 215 RC216 216 RC217

217

Halliburton A5T 311 XT5GR 315 XT6GR 315 QH7GR 337 QH7GS 337 QH8GR 347 QH8R 347 Kingdream HA317G 317 HA337G 337 Rubicon G31F 316 G31FH

317

G31S

314

G31SH

315

G32F

326

G32FH

327

G32S

324

G32SH

325

P31SH

315

GUl

P31FH P32SH

317 325

50–150 50–150

GUl GUl

P32FH

327

50–150

GUl

Smith Bits SB315 315 SB316 316 SB321 321 SB326 326

FLH SB347 TIX–TSK MS

327 347

81/2 121/4

2,000–5,000 160–50 2,000–4,000 160–50

S S

211

S

211

2,000–5,000 120–60

S

MS

211

2,000–4,000 120–60

S

MS–TMZ MS–TMG MS–TX MS–TX MS–TZ

215 217 217 217 215

2,000–4,000 2,000–5,000 2,000–4,000 2,000–5,000 2,000–5,000

GMW GMW S S S

MS–X

216

MS–X

216

MS–X MS–XZ MS–XZ MS–Z

216 214 214 214

MS–Z

214

Tri–Max TM211 TM214 TM215 TM216 TM217

55∕8, 57∕8, 6, 61∕8, 61/4, 71/2, 75∕8, 77∕8 83∕8, 81/2, 85∕8, 83/4, 95∕8, 97∕8, 105∕8, 11, 115∕8, 12, 121/4 133∕8, 133/4, 143/4, 15, 151/2, 171/2, 20, 22, 23, 24, 26 16, 171/2 81/2, 97∕8, 115∕8, 121/4 57∕8, 6, 61/4, 77∕8 81/2, 97∕8, 115∕8, 121/4 83∕8, 81/2, 95∕8, 115∕8, 121/4 55∕8, 57∕8, 6, 61∕8, 61/4, 75∕8, 77∕8 83∕8, 81/2, 85∕8, 83/4, 95∕8, 97∕8, 115∕8, 12, 121/4 16, 171/2 81/2, 121/4 16, 171/2 83∕8, 81/2, 83/4, 95∕8, 97∕8, 105∕8, 115∕8, 12, 121/4 16, 171/2, 20, 22, 23, 24, 26

2,000–4,000 120–60

MS

211 214 215 216 217

115∕8 97∕8 43/4, 51/2, 55∕8, 57∕8, 6, 63/4, 81/2 61∕8, 75∕8, 77∕8, 81∕8, 83∕8, 81/2, 83/4, 91/4, 91/2, 12

2,500–6,300 170–80 2,500–6,300 170–80 2,000–4,700 250–80

S S S

2,500–6,300 170–80

S

Baker Hughes GX–44 617 GX–44G 617

37∕8–43/4 143/4 161/2–181∕8 6 75∕8–121/4 9 9

2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000

GMXW GMXWC GMXWC GMXW GMXWC GMXWC GMXWC

MX–40 MX–44 MX–44G STX–40

617 617 617 617

55∕8, 81∕2, 83∕4 81∕2, 97∕8, 121∕4

2,500–7,000 80–50 4,000–7,000 70–40

VG–44G VGD–40 VGD–40H VGD–44 VGD–44G VM–44G VXG–44C

617 617 617 617 617 617 622

MX–44C VG–44C VM–40C VM–44C GX–44C

625 625 625 625 627

GX–45C MX–40C MX–40CG MX–44C STX–40C STX–44C

627 627 627 627 627 627

VG–38A VG–40A

627 627

VG–40C VG–44C

627 627

6, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 6, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 77∕8, 81/2, 83/4, 97∕8, 105∕8, 121/4, 131/2, 133/4, 143/4, 16, 17, 171/2 81/2, 83/4, 97∕8, 121/4 77∕8, 81/2, 83/4, 97∕8, 105∕8, 12, 121/4, 131/2, 133/4, 143/4, 16, 17, 171/2 81/2, 83/4, 97∕8, 105∕8, 121/4 81/2 6 81/2 81/2

40–250 40–250 40–250 40–250 40–250 40–250 40–250

G CG

4,000–9,000 45–70 4,000–9,000 45–70

GW

4,000–9,000 45–75

S

4,000–9,000 45–75

SG

4,000–9,000 45–70 4,000–9,000 45–70

GW

4,000–9,000 45–75

S

4,000–9,000 45–75

SG

4,000–9,000 60–275

CGW

4,000–9,000 60–275 4,000–9,000 60–275

GW CGW

4,000–9,000 60–275

GW

2,000–4,000 2,000–4,000 2,000–4,000 2,000–4,000

S S S S

160–50 160–50 160–50 160–50

Special features/ usage

QDMI5216

IEP616 IEP713 IVP713 Varel C613

50–150

Recommended rotary speed, rpm

60–400

300–2,000

Recommended WOB, lb/in. diameter

200–3,500

GUl

Size range, in.

71/2

50–150

IADC code

QDMI4213

CVP713

300–2,000

Manufacturer, Bit name/model number

60–400

Special features/ usage

200–3,500

S232,  77∕8,  83∕8,  81∕2,   S332, 81∕2,  83∕4,  83∕4 S333, S433 S133,  61∕2,  63∕4 S232  3  3,  31∕2  3

Recommended rotary speed, rpm

60–400

91/2

Recommended WOB, lb/in. diameter

200–3,500

QDM7413

Size range, in.

97∕8

CEP713 GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUlVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNUmVW GHMNUmVW GHMNUmVW GHMNUmVW GHMNUmVW

IADC code

QDM7313

Manufacturer, Bit name/model number

Recommended rotary speed, rpm 60–400

Special features/ usage

Recommended WOB, lb/in. diameter 200–3,500

Size range, in. 7

Manufacturer, Bit name/model number Smith Bits QDM4213

VG–45C 627 VGD–44 627 VGD–44C 627 VM–40C 627 VM–40CG 627 VM–44C 627 VMD–44C 627 VMG– 627 40CG VMG–44C 627 Halliburton EBXT12DR 435 EBXT435 12DRD EBXT12DS 435 EBXT12DSL 435 EBXT12DSR 435 EBXT12R 435 EBXT12RC 435 EBXT12S 435

2,000–4,000 110–50

S

2,000–5,000 110–50

S

2,000–4,000 2,000–5,000 2,000–4,000 2,000–5,000

S GMW W S

110–50 250–60 150–60 100–60

2,000–4,000 100–50

6–171/2 2,000–4,000 6–121/4 2,000–4,000 6–121/4 2,000–4,000 6–121/4 2,000–4,000 41/2–121/4 2,000–4,000 Insert roller cone bits 81/2, 83/4, 121/4 81/2, 83/4, 87∕8, 115∕8, 121/4 6 81/2 81/2, 121/4 51/2, 6, 61∕8, 61/4, 61/2, 63/4 121/4 61∕8, 61/4 55∕8 77∕8 83/4 121/4 81/2, 105∕8, 121/4, 133/4 143/4 171/2 16 171/2 77∕8, 83∕8, 81/2, 83/4, 97∕8, 121/4 77∕8, 83/4 61/2, 63/4 83∕8, 81/2, 12 57∕8, 71/2 6 45∕8, 43/4, 61∕8, 61/4, 61/2 87∕8 83/4, 87∕8, 97∕8, 121/4, 123∕8 61∕8 61∕8, 77∕8, 85∕8, 83/4, 91/2, 121/4 77∕8, 83/4 81/2 77∕8, 81/2, 121/4 105∕8 105∕8 61∕8, 81/2, 85∕8, 121/4 61∕8, 81/2 105∕8

250–60 250–50 110–50 110–50 100–60

S

60–120 60–120 60–150 60–150 60–120

2,900–7,300 140–70 2,900–7,300 140–70

X GX

2,600–6,800 2,900–7,400 2,900–7,400 2,000–5,300

325–80 250–80 250–80 205–80

BMX BMX BGMX MX

2,900–7,300 2,000–5,300 2,000–5,300 2,900–7,300 2,900–7,300 2,900–7,400 3,200–7,600

140–70 205–80 205–80 140–70 140–70 250–80 130–65

BGWX BGMWX BGMWX BGMWX BGMWX BGMWX BGMWY

2,000–5,300 2,200–5,900 2,000–5,300 2,000–5,300 3,200–7,600

155–75 80–40 155–75 155–75 130–65

BMY BGWY BGMWY BGMWY Y

3,200–7,600 2,600–6,800 2,900–7,400 2,600–6,800 2,000–5,300 2,000–5,300

130–65 260–80 200–80 260–80 190–80 190–80

Y BMY BGMY BMY MY MY

3,200–7,600 130–65 3,200–7,600 130–65

ABGWX ABGWX

2,000–5,300 190–80 3,200–7,600 130–65

BGWY BGWY

3,200–7,600 3,200–7,600 3,200–7,600 2,900–7,400 2,900–7,400 2,900–7,400 2,600–6,800 2,900–7,400

130–65 130–65 130–65 200–80 200–80 200–80 260–80 200–80

BGWY BGMWX BGMWY BGMWY BGMWY BGMWY BGMWY BGMWY

81/2, 121/4

2,900–7,400 200–80

BGMWY

28 161/2–181/4

3,000–7,000 40–220 3,000–7,000 40–220

GMXWC GMXWC

143/4–26 16 16–171/2 171/2 24 143/4–28

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

40–220 40–220 40–220 40–220 40–220 40–220

World Oil® / JANUARY 2017 D-19

GMXWC GMXWC

435

16

3,000–7,000 40–220

GMXWC

435 435 435 435 435 435 435 437 437 437

22–24 22 171/2 181∕8–28 28 16–20 28 121/4 81/2–121/4 81/2

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

437 437 437 437 437 437 437

81/2–121/4 61∕8 57∕8–121/4 61∕8–81/2 91/2 55∕8–131/2 81/2

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMXWC GMXW GMXWC GMXWC GMXWC GMXWC GMXWC

437 437 437 437 437 437 437 437 437 445

81/2–115∕8 121/4 43/4 121/4 83/4 81/2 57∕8–121/4 121/4 81/2–121/4 16

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMXWC GMXWC GMXW GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

445

16

3,000–7,000 40–220

GMXWC

445

16

3,000–7,000 40–220

GMXWC

445

16

3,000–7,000 40–220

GMXWC

445

161/2

3,000–7,000 40–220

GMXWC

445 445 445

171/2 171/2 143/4–26

3,000–7,000 40–220 3,000–7,000 40–220 3,000–7,000 40–220

GMXWC GMXWC GMXWC

445 445 445 445 445 445 445 445 445 447

16–171/2 171/2 171/2 16–171/2 171/2 16 121/4 181∕8–28 28 61∕8

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXW

447 447

81/2–121/4 121/4

3,000–7,000 40–220 3,000–7,000 40–220

GMXWC GMXWC

447 447 447 447 447 447

6–121/4 121/4 91/2 6–121/4 121/4 81/2

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220

GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

447

121/4

3,000–7,000 40–220

GMXWC

447 447 447 447 515 515 515 515 515 515

6 ∕8 121/4 83/4 83/4–121/4 16 143/4 171/2 151/2–22 22 151/2

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMXW GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

515 515 515 515

16 171/2 16–171/2 16

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

40–220 40–220 40–220 40–220

GMXWC GMXWC GMXWC GMXWC

1

515

171/2

3,000–7,000 40–220

GMXWC

515 515

22 171/2

3,000–7,000 40–220 3,000–7,000 40–220

GMXWC GMXWC

515 515

121/4 121/4

3,000–7,000 40–220 3,000–7,000 40–220

GMYWC GMYWC

D-20 2017 Drill Bit Classifier

XT20DR XT20DS XT20R XT20RP XT20S EHQ18R EQH18R EQH18RP EQH20D2R EQH20D2RD EQH20D3RD EQH20DR EQH20DRG EQH20R EQH20S EQH21DR EQH21R EQH21RA EQH22D2R EQH22D3R EQH22R EQH23 EQH23DR EQH23R EQHD20D2R EQHD20D3RD EQHD20R Q20R QH18S QH20 QH20D2R QH20D2S QH20D3R QH20DR QH20DRLD QH20DS QH20R QH20RC QH20S QH21 QH21R QH22DR QH22R QHD20R QHK20 SR20R EBXT26R EBXT26S EQH24DR EQH24R EQH25DR EQH25R EQH26D2R EQH26DR EQH26R EQH27DR EQH27R EQH27RP EQH28D2R EQH28DR EQH28R EQHD24S EQHD25R EQHD26R QH24DR QH24R QH25 QH25R QH26DR QH26R QH27 QH27RP QHD26R A28RC EBXT28R EBXT30R EBXT30S EBXT30SL EBXT32DR EBXT32SL XT28DR XT28R XT28RP XT28S XT30R XT30S

515 515 515 515 515 515 515 517 517 517

171/2 141/2 17 16 141/2–26 171/2 141/2–26 61/4 61/4 61/4

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMYWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXW GMXW GMXW

517

81/2–121/4

3,000–7,000 40–220

GMXWC

517 517

121/4 81/2

3,000–7,000 40–220 3,000–7,000 40–220

GMXWC GMXWC

517 517 517 517 517 517 517 517 517 517 517 517

6–121/4 121/4 55∕8–121/4 115∕8–121/4 77∕8–83/4 77∕8–11 81/2–121/4 77∕8–83/4 83/4 83/4 121/4 83/4

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

GMXWC GMXWC GMXWC GMXWC GMYWC GMYWC GMYWC GMXWC GMXWC GMXWC GMYWC GMYWC

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

517

81/2

3,000–7,000 40–220

GMYWC

517 517 517 517 517 517 517 517 517 517 517 517 517 517 517 517 517 517 517 517 517 517 525 525 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 527 535 535 535 535 535 535 535 535 535 535 535

81/2–121/4 81/2–121/4 61/2 43/4 121/4 83/4 75∕8 73∕8 121/4 61∕8–121/4 6 81/2 51/2–121/4 105∕8 51/4–81/2 77∕8 77∕8 121/4 121/4 61/2 55∕8–81/2 63/4–81/2 143/4 171/2 61∕8 61∕8–121/4 83/4 83/4 81/2–83/4 83/4 83/4–121/4 83/4 83/4 77∕8 83/4 83/4 83/4 121/4 83/4 83/4 83/4 83/4 83/4 77∕8 81/2 81/2 77∕8–83/4 77∕8 83/4 22 16 151/2–191/4 151/2 171/2 171/2 171/2 24 22 22 16

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000

GMXWC GMXWC GMXW GMXW GMXWC GMXWC GMXW GMXW GMXWC GMXWC GMXW GMXWC GMXWC GMXWC GMXWC GMYW GMYW GMXWC GMXWC GMXW GMXWC GMXWC GMXWC GMXWC GMXW GMXWC GMYWC GMYWC GMXWC GMXWC GMXWC GMYWC GMYWC GMYW GMXWC GMXWC GMXWC GMXWC GMYWC GMXWC GMXWC GMXWC GMYWC GMYW GMXWC GMXWC GMYWC GMYW GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC GMXWC

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

XT30SR A20R EQ1 EQH28D3RD EQH29 EQH29D2R EQH29DR EQH29R EQH30 EQH30D2R EQH30D2RA EQH30D2SRG EQH30D3R EQH30D3RD EQH30DR EQH30DRA EQH30DRD EQH30DRLD EQH30R EQH30RA EQH30RC EQH30S EQH31 EQH31D2R EQH31D2RA EQH31DR EQH31DRA EQH31RA EQH33 EQH33DR EQHD28R EQHD30D3R EQHD30D3RD EQHD30DR EQHD30DRD EQHD30R EQHDD30DRD Q30R Q30S QH30D2R QH30D2S QH30D3R QH30D3RD QH30DR QH30R QH30S QH31 QH31R QH33 QH33R QHD30D3R QHD30DR QHD33R QHK30 EBXT38SL EQH34D2R EQH34R EQH35 EQH35DR EQH35DRA EQH35R EQH35RA EQH36R EQH37 EQH38D2R EQH38DR EQH39 EQH39D EQH39D2R EQHD35R EQHD36D3R EQHD36DR EQHD36R QD36DR QH35D2R QH35DR QH35R

4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000

40–220 40–220 40–220 40–220

GMXWC GMXWC GMXWC GMXWC

537 537 537 537 537 537 537

57∕8 83/4 83/4 121/4 83/4 83/4 81/2–83/4

4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMXW GMXWC GMYWC GMYWC GMYWC GMYWC GMXWC

537

57∕8–121/4

4,000–7,000 40–220

GMXWC

537 537

61/4–63∕8 81/2

4,000–7,000 40–220 4,000–7,000 40–220

GMXW GMXWC

537 537

121/4 81/2–121/4

4,000–7,000 40–220 4,000–7,000 40–220

GMXWC GMXWC

537

6–97∕8

4,000–7,000 40–220

GMXWC

537

63∕8

4,000–7,000 40–220

GMXW

537 537 537 537 537 537 537

5 ∕8 121/4 6–121/4 63∕8–61/2 121/4 81/2–121/4 77∕8

4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMXW GMXWC GMXWC GMXW GMXWC GMXWC GMYW

537 537

121/4 63∕8

4,000–7,000 40–220 4,000–7,000 40–220

GMYWC GMYW

537 537 537 537 537

121/4 121/4 63∕8 77∕8 57∕8

4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000

GMYWC GMYWC GMYW GMYW GMYW

7

40–220 40–220 40–220 40–220 40–220

Special features/ usage

143/4–28 171/2 28 81/2

Size range, in.

535 535 535 537

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

3,000–7,000 40–220 3,000–7,000 40–220

Recommended rotary speed, rpm

143/4–28 151/2–223/4

Recommended WOB, lb/in. diameter

435 435

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number EBXT12SC EBXTD12DR EBXTD12SR XT12D2S XT12DR XT12R XT12S XT12SR A12R EQH10R EQH10RP EQH12D2R EQH12D2RP EQH12DR EQH12DRP EQH12DS EQH12R EQH12RP EQH12S EQHD12DSD Q12R QH10D3R QH10R QH12 QH12R QH12SR QHK12 EBXT14R EBXT14SR EBXT14SRC EBXT14SRCL EBXT16D2R EBXT16D2S EBXT16D2SL EBXT16DR EBXT16DS EBXT16DSL EBXT16R EBXT16S EBXT16SL EBXT18RC EQH14R XT16DR XT16R EQH14DR EQH16D2R EQH16D2RC EQH16DR EQH16DRG EQH16DS EQH16R EQH16RC EQH16S EQHA16R EQHD14D3R EQHD16DSP QH16DR QH16R EBXT18R EBXT20DR EBXT20DS EBXT20R EBXT20RP EBXT20S EBXT22DR EBXT22DSL EBXT22R EBXT22RC EBXT22SL EBXTD20DRP EBXTD22SL EQH23R EQHD23DRD XT19RA XT20

537

83/4

4,000–7,000 40–220

GMXWC

537 537

121/4 81/2–121/4

4,000–7,000 40–220 4,000–7,000 40–220

GMXWC GMXWC

537 537

81/2 6–81/2

4,000–7,000 40–220 4,000–7,000 40–220

GMXWC GMXWC

537 537 537 537 537 537 537 537 537 537 537 537 537 537 537 537 537 537 537 545 547 547 547

61∕8–83/4 6–81/2 43/4–47∕8 81/2 81/2–83/4 73∕8 83/4 81/2 61∕8–97∕8 51/2–121/4 85∕8–121/4 77∕8 121/4 77∕8 11 81/2 81/2 83/4 81/2 171/2 77∕8–83/4 61∕8–83/4 83/4

4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMXWC GMXWC GMXW GMXWC GMXWC GMXW GMXWC GMXWC GMXWC GMXWC GMXWC GMYWC GMYWC GMYW GMYWC GMXWC GMXWC GMYWC GMXWC GMXWC GMXWC GMXWC GMYWC

547 547 547 547 547 547 547 547 547 547 547

83/4 83/4 83/4 83/4 83/4 77∕8 81/2–121/4 83/4 77∕8–83/4 83/4 83/4

4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

GMYWC GMYWC GMYWC GMYWC GMXWC GMYW GMXWC GMXWC GMYWC GMYWC GMYWC

547 547 547 547 547 547

83/4 121/4 121/4 83/4 61/2 81/2

4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000

40–220 40–220 40–220 40–220 40–220 40–220

GMYWC GMXWC GMXWC GMXWC GMXW GMYWC

HF617H

617

HF625H HF627

625 627

HF627GH 627 HF627HM HJ617 HJ617GH HJ627 HJT617G

627 617 617 627 617

HJT617GH 617 HJT617GX 617 MD617 617

45∕8, 43/4, 47∕8, 52∕3, 51/2, 55∕8, 57∕8, 6, 61∕8, 61/4, 61/2, 71/2, 75∕8, 77∕8, 81/2, 83/4, 97∕8, 121/4 121/4 6, 6 1/8, 61/2, 77∕8, 83/4, 91/2, 97∕8, 105∕8, 121/4 6, 6 1/8, 61/2, 77∕8, 83/4, 91/2, 97∕8, 105∕8, 121/4 121/4 77∕8, 81/2, 83/4, 91/2, 105∕8, 121/4 6, 61∕8, 61/2, 77∕8, 81/2, 83/4, 121/4 81/2, 91/2 81/2, 83/4, 91/2, 121/4 81/2 81/2, 12, 121/4 81/2, 91/2, 121/4, 125∕16, 123∕8, 125∕8 81/2, 91/2, 123∕8 81/2 45∕8, 57∕8, 6, 61∕8, 61/4, 61/2, 65∕8, 77∕8, 81/2, 83/4, 91/2, 105∕8, 121/4

ReedHycalog Bits JA62 627 77∕8, 83/4, 87∕8, 11 JA45 627 121/4 R40 617 6, 61/4, 61/2, 63/4, 83/4, 123∕8 R40A 617 6, 61/4, 61/2, 63/4, 77∕8, 83/4, 97∕8, 121/4 R44 627 61/2, 105∕8 R44A 627 43/4, 55∕8, 6, 61/4, 61/2, 63/4, 77∕8, 97∕8, 105∕8, 121/4 R45 627 41∕8, 45∕8, 43/4, 47∕8, 5, 57∕8, 6, 61∕8, 63/4, 83/4, 97∕8, 115∕8, 121/4 R45A 627 83/4 R48 627 83/4 RH40 617 61∕8, 81/2, 85∕8 RH40A 617 61∕8, 61/4, 81/2, 85∕8, 83/4 RH44A 627 81/2 RH45 627 81/2 RH45A 627 83/4

C C GC CLY

3,000–6,000 80–40

CLY

3,000–6,000 80–40 3,000–6,000 80–40

G GLY

3,000–6,000 80–40

GLY

3,000–6,000 80–40

GLY

2,000–4,500 220–50 3,000–6,000 80–40

G CGLSY

3,000–6,000 80–40

CGLSY

2,000–5,000 200–80 3,000–6,000 80–40

GL GLY

3,000–6,000 80–40

G

3,000–6,000 3,000–6,000 3,000–6,000 3,000–6,000 3,000–6,000

G CG G CGLY LY

200–40 220–40 220–40 200–40 220–40

3,000–6,000 220–40 3,000–6,000 220–40 3,000–6,500 220–40

L

3,500–6,000 80–40 3,500–6,000 80–40 2,500–6,000 120–40

AY AY CGMWY

GHLMY

2,500–6,000 120–40

CGMWX

2,500–6,000 120–40 2,500–6,000 120–40

CGMWY GMWX

2,500–6,000 120–40

CGMWY

3,500–6,000 3,500–6,000 2,500–6,000 2,500–6,000

120–40 120–40 120–40 120–40

GMWX GMWY GMWY GMWX

3,500–6,000 120–40 3,500–6,000 120–40 3,500–6,000 120–40

GMWX GMWY GMWX

77∕8 171/2 81/2 71/2, 171/2

3,500–6,000 3,500–6,000 3,500–6,000 3,500–6,000

81/2 171/2

3,500–6,000 120–40 3,500–5,100 450–60

316

6, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 6, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 6¼, 77∕8, 83∕8, 8½, 8¾, 97∕8, 12¼ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 6, 6¼, 6¾, 77∕8, 83∕8, 8½, 8¾, 97∕8, 105∕8, 12, 12¼, 13½, 13¾, 14¾, 16, 17, 17½ 77∕8, 81/2, 83/4, 97∕8, 105∕8, 121/4, 131/2, 133/4, 143/4, 16, 17, 171/2 81/2, 83/4, 97∕8, 121/4 77∕8, 81/2, 83/4, 97∕8, 105∕8, 12, 121/4, 131/2, 133/4, 143/4, 16, 17, 171/2 81/2, 83/4, 97∕8, 105∕8, 121/4

4,000–9,000 45–70

G31FH

317

G31S

314

G31SH

315

G32F

326

G32FH

327

G32S

324

G32SH

325

P31SH

315

P31FH P32SH

317 325

P32FH

327

Smith Bits 47YGA 612Y 4JS 615X F4 617X F40W 617X F40WUY 617Y F40YA 617Y F45A 617X F47 627Y F47H 627Y F47HY 627Y F47HYA 627Y F47HYAD 627Y F47Y 617Y F47YA

617Y

FH45 FH47HY FH50 FHI40 FHI43Y FHI45 FHI45DOD FHI47HY FHI47HYD FHI50 FHK45Y FHKI40B FI38YA FI40U FI40Y FI48YA G40WYD G40Y GF40 GF40B GF40UYB GF40YB GF45WY GF45Y GF45YD GF47HY GF47Y GFI45 GFI47HWY GFI47HY

617X 627Y 627X 617X 617Y 617X 617X 627Y 627Y 627X 627Y 617X 617Y 617X 617Y 627Y 615Y 615Y 617X 617X 617Y 617Y 627Y 627Y 627Y 627Y 617Y 617X 627Y 627Y

81/2 17, 171/2 121/4 81/2 81/2 87∕8 87∕8 105∕8 81/2, 85∕8, 115∕8 77∕8, 81/2, 83/4, 97∕8, 115∕8 83/4, 121/4 83/4 81/2, 83/4, 97∕8, 105∕8, 121/4 77∕8, 81/2, 83/4, 11, 121/4 81/2, 97∕8 83/4 81/2, 83/4, 121/4 83/4 77∕8 77∕8, 83/4 83/4 83/4 83/4 77∕8, 83/4 81/2 81/2 87∕8 81/2 81/2 121/4 143/4 143/4 81/2, 121/4, 171/2 83∕8 81/2 81/2 81/2, 85∕8 81/2 81/2 85∕8 121/4 121/4 121/4 121/4

120–40 450–60 120–40 450–40

GMWY CY X Y X CGMWY

4,000–9,000 45–70

GW

4,000–9,000 45–75

S

4,000–9,000 45–75

SG

4,000–9,000 45–70 4,000–9,000 45–70

GW

4,000–9,000 45–75

S

4,000–9,000 45–75

SG

4,000–9,000 60–275

CGW

4,000–9,000 60–275 4,000–9,000 60–275

GW CGW

4,000–9,000 60–275

GW

2,000–4,000 2,000–4,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000

AX X X X Y AY AX Y Y Y

160–50 140–70 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50

3,000–7,000 160–50 3,000–7,000 160–50 3,000–7,000 160–50

AY GWY Y

3,000–7,000 160–50

AY

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 1,500–4,000 1,500–4,000 3,000–6,500 3,000–6,500 3,000–6,500 3,000–6,500 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 3,000–6,500 3,000–7,000 3,000–7,000

X Y X X Y X X Y GWY X BY BWX AY X Y AGY BGHMWY BGHMY BGHMX BGHMWX BHMWY BHMWY BGHMWY BGHMY BGHMWY BGHMY BGHMY BGHMX BGHMY BGHMY

160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 240–50 240–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50

280–50 280–50 240–50 240–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 160–50 270–40 270–40

BGHMWY BHMY BGHMWX BGHMY X GWX Y BWY BWY X Y ABY ABY HMX HMX

2,000–6,000 270–40 2,000–6,000 270–40

BGHMWX HMY

2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000 2,000–6,000

270–40 270–40 270–40 270–40 270–40 270–40 270–40 270–40 270–40

AHMY GHMWY GHMWY HMX HMX HMY HMY HMX BGHMWY

622X 121/4 2,000–5,500 627X 4, 41∕8 1,000–2,500 617X 83∕8, 81/2, 85∕8, 83/4, 2,500–6,000 95∕8, 97∕8, 115∕8, 12, 121/4 M40GFSP 617X 83∕8, 81/2, 85∕8, 83/4, 2,500–6,000 95∕8, 97∕8, 115∕8, 12, 121/4 M40GP 617X 55∕8, 57∕8, 6, 61∕8, 61/4, 2,500–5,000 75∕8, 77∕8 M50GFP 627X 81/2, 121/4 2,500–6,000 M50GFSP 627X 81/2, 121/4 2,500–6,000 1 M50GP 627X 6, 6 ∕8 2,500–5,000 X40G 617X 55∕8, 57∕8, 6, 61∕8, 61/4, 2,500–5,000 75∕8, 77∕8 X40G 617X 83∕8, 81/2, 85∕8, 83/4, 2,500–6,000 95∕8, 97∕8, 115∕8, 12, 121/4 X40G 617X 143/4, 151/2, 16, 171/2 2,000–5,500 X50G 627X 55∕8, 57∕8, 6, 61∕8, 61/4, 3,000–5,000 75∕8, 77∕8 X50G 627X 81/2, 121/4 3,000–6,000 Z40G 615X 81/2, 121/4 2,500–5,500 Tri–Max TM613 613 41/2–121/4 2,000–4,500 TM615 615 41/2–121/4 2,000–4,500 TM617 617 41/2–121/4 2,000–4,500 TM622 622 6–171/2 2,000–4,500 TM625 625 6–121/4 2,000–4,500 Varel AF45 617A 61∕8, 61/4, 63∕8, 2,500–7,000 61/2, 77∕8 AF45H 617A 81/2, 83/4, 87∕8 2,500–7,000 AF47 627A 61/4, 63∕8, 61/2, 77∕8 2,500–7,000 1 CM41 617Y 6 ∕8 2,500–7,000 CM44 617X 43/4, 47∕8, 55∕8, 53/4, 6, 2,500–7,000 61∕8, 61/4, 63/4 CM45 617Y 6 2,500–7,000 ES44 615X 171/2, 26 1,500–4,750 HE44 615X 81/2, 121/4 2,250–5,000 ES45 615Y 171/2 2,250–5,000 HE44 617X 81/4, 83∕8, 105∕8, 115∕8, 2,500–7,000 121/4 HE44V 617X 77∕8, 81/2, 85∕8, 2,500–7,000 83/4, 97∕8 2,500–7,000 HE45V 617Y 97∕8 HE45 617Y 81/4, 83∕8, 115∕8, 121/4, 2,500–7,000 123∕8 HE47 627Y 77∕8, 81/2, 83/4, 121/4 2,500–7,000 CM47 627Y 43/4, 47∕8, 61∕8, 2,500–7,000 61/2, 63/4 Fish tail bits

120–40 60–40 220–40

AX GX GLMX

220–40

GLMX

GFI48BD GFK47Y GI40B GI47HY SB615 SB615D SB617 SB617D SB617DD SB625 SB627Y SK47YA SK47YGA XR38 XR40

IADC code 627X 617Y 615X 625Y 615X 615X 617X 617X 617X 625X 627Y 615Y 615Y 617X 617X

XR40KDD 617X XR40Y 627Y XR40YA XR40YD XR40YDD XR50 XRI40 XRI40Y XRI45Y XRI50 XRK40YD TIX–TSK A50 K50G M40GFP

Size range, in.

3,000–7,000 3,000–7,000 1,500–4,000 1,500–4,000 2,000–4,000 2,000–4,000 2,500–5,000 2,500–5,000 2,500–5,000 2,000–4,000 2,000–4,000 2,500–5,000 2,500–5,000 2,000–6,000 2,000–6,000

Manufacturer, Bit name/model number

CY

627 615 617 625, 627 627 615

Special features/ usage

220–50 220–50 300–80 300–80 300–80 80–40

Recommended rotary speed, rpm

2,000–4,500 2,000–4,500 2,000–4,500 2,000–4,500 2,000–4,500 3,000–6,000

Recommended WOB, lb/in. diameter

CGY CGY CG CL CGLY CG

S62A TH61 Rubicon G31F

Size range, in.

80–40 80–40 200–40 220–50 200–80 220–50

RH48 S61 S61A S62

IADC code

3,000–6,000 3,000–6,000 3,000–6,000 2,000–4,500 2,000–5,000 2,000–4,500

Manufacturer, Bit name/model number

6, 61∕8, 121/4 6, 61∕8, 121/4 57∕8, 6, 61∕8 115∕8, 121/4, 171/2 171/2 131/2, 133/4, 143/4, 16, 171/2 16, 171/2 171/2 115∕8, 121/4, 16, 171/2 121/4 121/4, 16, 171/2 45∕8, 43/4, 47∕8, 51/2, 57∕8, 6, 61∕8, 61/4, 61/2, 71/2, 77∕8, 83∕8, 81/2, 83/4, 91/2, 97∕8, 121/4 57∕8, 61∕8, 77∕8, 83∕8, 81/2, 83/4, 97∕8, 121/4 81/2 61∕8, 61/2, 77∕8, 81/2, 83/4 61/2, 77∕8, 81/2, 83/4

Special features/ usage GMYWC GMYWC GMXW GMXWC GMYWC GMYWC GMYWC GMXWC GMXWC GMXWC GMYWC GMYWC GMYW GMYWC GMYWC GMYWC GMYWC GMXW

Special features/ usage

HF615GH 615 HF617 617

40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220 40–220

Recommended rotary speed, rpm

HAS627 627GLY HAT617G 617

4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000 4,000–7,000

Recommended WOB, lb/in. diameter

627

HA627GH 627 HAS617G 617

Recommended rotary speed, rpm

HA627G

625 615 615 615 615 617

Recommended WOB, lb/in. diameter

GAT625G GAT615GH GJ615GC GJ615GH GJT615GH HA617G

83/4 83/4 77∕8 121/4 77∕8–83/4 121/4 121/4 83/4 83/4 83/4–97∕8 77∕8–83/4 83/4 73∕8 77∕8–83/4 81/2–83/4 81/2 81/2–83/4 61/2

Size range, in.

IADC code

Manufacturer, Bit name/model number

QH36A 547 QH36R 547 QH37 547 QH37R 547 QH37S 547 QH38 547 QH38DR 547 QH38R 547 QH39 547 QH39D2R 547 QH39D2S 547 QH39DR 547 QH39R 547 QHD35D2R 547 QHD35R 547 QHD36DR 547 QHD37R 547 QHD39R 547 Kingdream A617 547 A627 627 A627H 627 GA615G 615 GA625G 625 GAT615G 615

627Y 627Y 627Y 627X 617X 627Y 627Y 627X 617Y

Bit–Tech DP–440– M131 B1P Halliburton FM3563 M221 FMF3563 M221 FMH3563 M221 FMR3563 M221

81/2 105∕8 171/2 16 16 121/4 81/2 81/2 81/2 171/2, 24 81/2 105∕8 81/2 61∕8 43/4, 6, 61∕8, 61/4, 61/2, 63/4 6 43/4, 55∕8, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4 61/4, 63∕8 6 6 61∕8, 61/4, 61/2, 63/4 61∕8 57∕8 6 61∕8 6

220–40

GLMX

200–40 200–40 200–40 80–40

GLMX GLMX GLMX GX

80–40

GX

80–40 70–40

GX GX

70–40 120–40

GX GX

60–120 60–120 60–120 60–120 60–120 300–50

AW

300–50 300–50 275–50 275–50

AW AW MW MW

275–50 150–50 300–50 300–50 300–50

MW CMW CMW CMW CMW

300–50

CMW

300–50 300–50

CMW CMW

300–50 275–50

CMW MW

61∕4

300–2,000

63∕4 63∕4 63∕4 63∕4

500–2,500 500–2,500 500–2,500 500–2,500 PDC drill bits

60–400 60–400 60–400 60–400

MVW MVW MVW MVW

500–2,500

60–400

DRstGVW

Baker Hughes AT406FX M233 81/2, 83/4

100–500 ADGMVW

World Oil® / JANUARY 2017 D-21

D-22 2017 Drill Bit Classifier

QD607 QT405 QT406 QT407 QT505 QT506 QT507 QT605 QT606 QT607 T205X T206X T405 T405FX T405X T405S T406 T406F T406FX T406FSX T406X T505 T505F T505FS T505FX T505S

M323 M233 M233 M333 M323 M323 M323 M323 M223 M323 M243 M233 M233 M233 M233 S233 M233 M233 M233 S233 M223 M233 M223 S223 M223 M223

T505X T506 T506F T506FSX T506FX T506FXX T506S T506SX T605 T605F T606 T606F T806F TD406 TD406F TD407 TD407F TD505 TD505F TD506 TD506F T506SX T506X TD605 TD605F T605FS T605FX T605S

M233 M233 M223 S233 M223 M223 S223 S223 M233 M233 M223 M223 M223 M233 M233 M333 M333 M323 M323 M323 M323 S223 M223 M323 M323 S223 M223 S223

T605X

M223

T606 T606F T406S T406FS T505S T505FS T506S T506FS T605S T605FS T606FS T606FSX T606FX T606S T606X

M223 M223 S233 S233 S223 S233 S223 S223 S323 S323 S223 S223 M223 S223 M223

T805F T805FX T806F T806FS T806FX T806S TD205FX TD205X TD305FS TD305S TD305X TD306 TD306F TD306FS

M223 S223 M223 S223 M223 S223 M223 M333 S233 S233 M233 M233 M233 S233

31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 61∕8 61∕8 57∕8, 6, 61∕8 61∕8, 63/4 61∕8, 63/4 61∕8, 63/4 31∕8–28 31∕8–28 57∕8, 6, 61∕8, 61/4, 83/4 61∕8 57∕8, 6, 61/2, 83/4 57∕8, 6, 61/2, 83/4 6, 61∕8, 77∕8, 81/2, 83/4 81/2 81/2, 83/4 61∕8, 61/4, 61/2, 77∕8, 83/4, 97∕8, 121/4 6, 81/2 31∕8–28 61/4, 77∕8, 81/2, 83/4 81/2 81/2, 83/4, 97∕8, 121/4 81/2 83/4, 121/4, 133/4 131/2 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 131/2 77∕8, 81/2, 83/4, 121/4 31∕8–28 31∕8–28 121/4 77∕8, 83/4, 121/4 81/2, 121/4, 151/2, 171/2 77∕8, 81/2, 83/4, 97∕8, 115∕8, 121/4 81/2, 105∕8, 131/2 83/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 121/4 83/4, 121/4 121/4, 143/4, 171/2 81/2, 83/4, 12, 121/4, 131/2, 14 3/4 83/4 151/2 121/4, 131/2 121/4 121/4, 131/2 121/4, 171/2 35∕8 41/2 61/4, 63/4 61∕8, 81/2 37∕8 35∕8, 6, 61∕8, 63/4 6, 61∕8, 63/4 81/2, 83/4

235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 235–2,500 500–2,500 500–2,500 500–2,500 500–2,500

350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 60–400 60–400 60–400 60–400 60–400 350–50 350–50 60–400 60–400 60–400 350–50 60–400 60–400 60–400 60–400

DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW

500–2,500 235–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500

60–400 350–50 60–400 60–400 60–400 60–400 60–400 60–400 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 60–400 350–50 350–50 60–400 60–400 60–400

DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGVW DGMVW DGMVW DGVW DGVW DGVW

500–2,500

60–400

DGVW

500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 500–2,500

60–400 60–400 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 60–400 60–400 60–400

DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW

500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500

60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400

DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW

TD306S TD306SX TD306X TD405 TD405F TD405FS TD405FSX TD405FX TD405S TD405X TD405XX TD406 TD406F TD406FS TD406FSX TD406FX TD406S TD406SX TD406X TD505 TD505F TD505FS TD505FSX TD505FX TD505S TD505SX TD505X TD506 TD506F TD506FS TD506FSX TD506FX TD506FXX TD506S TD506SX TD506X TD605 TD605F TD605FX TD605FX TD605S TD605X TD606 TD606F TD606FS TD606FSX TD606FX TD606S TD606X

S233 61∕8, 61/2, 63/4, 77∕8, 81/2, 83/4 S233 81/2 M233 81/2 M233 43∕8, 61∕8, 61/4, 61/2 M233 43∕8 S233 6, 61∕8, 61/4, 63/4, 81/2, 83/4 S233 63/4 M233 61∕8, 61/4, 63/4, 81/2, 83/4 S233 6, 61∕8, 61/4, 63/4, 77∕8, 81/2, 83/4 M233 61∕8, 61/4, 81/2, 83/4 M233 61∕8 M233 51/2, 6, 61∕8, 81/2 M233 55∕8, 57∕8, 6, 61∕8, 83/4 S233 61∕8, 81/2, 83/4 S233 61/4, 73/4 M223 55∕8, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 81/2, 83/4, 91/2, 97∕8 S233 83/4 S233 83/4 M233 55∕8, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 81/2, 83/4, 91/2, 121/4 M223 61∕8, 77∕8, 81/2, 83/4 M223 61∕8, 77∕8, 81/2, 83/4 S233 61∕8, 61/4, 63/4, 77∕8, 81/2, 83/4 S223 81/2 M223 81/2, 83/4, 121/4 S233 61∕8, 61/4, 63/4, 77∕8, 81/2, 83/4 S223 81/2 M223 6, 81/2, 121/4 M223 12, 121/4 M223 6, 63/4, 81/2, 85∕8, 121/4 S233 77∕8, 81/2, 83/4, 12, 121/4, 131/2, 171/2 S223 81/2, 91/4, 121/4, 16, 181∕8 M223 63/4, 83∕8, 81/2, 83/4, 97∕8, 105∕8, 121/4, 16 M223 81/2, 83/4, 121/4 S223 81/2, 121/4 S223 81/2, 91/4, 16 M223 61∕8, 83∕8, 81/2, 83/4, 97∕8, 12, 121/4 M223 81/2, 121/4 M223 121/4 S223 81/2, 121/4 M223 83/4, 121/4 S223 77∕8, 121/4 M223 81/2, 121/4 M223 81/2, 121/4, 171/2 M223 81/2, 121/4, 16 S223 81/2, 121/4, 23 S223 121/4 M223 83/4, 121/4, 16, 171/2 S223 81/2, 83/4, 121/4, 17, 171/2 M223 77∕8, 81/2, 12, 121/4, 16, 171/2 S233 81/2 M223 121/4

TD805FS TD806F DB Bits D413X M332 6, 61∕8, 61/4, 61/2, 63/4 D516X 77∕8, 81/2, 83/4, 97∕8 D611 M342 37∕8, 41∕8, 41/4, 41/2, 43/4, 6, 61∕8, 61/2, 63/4 D616 M322 61∕8, 61/2, 63/4, 77∕8, 81/2, 83/4, 97∕8, 11, 121/4 D711 M342 43/4, 6, 61∕8, 61/2, 63/4, 77∕8 D713 M332 77∕8, 81/2, 83/4, 97∕8, 121/4 D716 M423 97∕8, 11, 121/4 Drill Master, Inc. M316+ M123 77∕8 M513 M233 57∕8, 61∕8 M519 M223 97∕8 M590 M242 37∕8 M616 M223 97∕8 M719 M323 16 M719 M223 171/2 M719 M223 81/4 Halliburton FC286Li M322 121/4

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DRstGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW

Size range, in.

350–50 350–50 350–50 60–400 60–400 60–400 350–50 350–50 350–50 60–400 60–400 350–50 350–50 350–50 350–50 60–400 60–400 350–50 350–50 60–400 350–50 350–50 350–50 350–50 350–50 350–50 60–400 60–400 350–50 350–50 350–50 60–400 60–400 350–50 60–400 60–400 350–50 350–50 350–50 60–400 350–50 350–50 60–400 60–400 350–50 60–400 60–400 60–400 350–50 350–50 60–400 60–400 350–50 60–400 60–400 60–400 350–50 60–400 350–50 350–50 350–50 350–50 350–50 60–400 350–50 350–50 60–400 350–50 350–50 60–400 60–400 60–400 350–50 350–50 60–400 350–50 350–50 60–400 350–50 60–400 60–400 60–400 350–50 350–50 60–400 350–50 60–400

IADC code

235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 500–2,500 500–2,500 500–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 500–2,500 235–2,500 500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 500–2,500 235–2,500 500–2,500

Manufacturer, Bit name/model number

Special features/ usage

31∕8–28 31∕8–28 57∕8–28 81/2, 83/4 81/2, 83/4 81/2, 83/4 31∕8–28 31∕8–28 57∕8–28 81/2, 83/4 81/2, 83/4, 97∕8 31∕8–28 31∕8–28 31∕8–28 31∕8–28 83/4 81/2 31∕8–28 31∕8–28 81/2, 83/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 61/4 83/4 31∕8–28 31∕8–28 31∕8–28 121/4, 131/2, 143/4 121/4 31∕8–28 121/4 121/4 31∕8–28 31∕8–28 31∕8–28 6 31∕8–28 31∕8–28 6, 81/2 61∕8 31∕8–28 121/4 91/4, 121/4 81/2 31∕8–28 31∕8–28 81/2, 121/4 81/2, 121/4, 171/2 31∕8–28 181/4, 181/2 171/2 143/4, 171/2 31∕8–28 81/2, 16 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 81/2 31∕8–28 31∕8–28 83/4, 121/4 31∕8–28 31∕8–28 35∕8, 45∕8 35∕8 41∕8 31∕8–28 31∕8–28 81/2 31∕8–28 31∕8–28 61/2 31∕8–28 121/4 81/2 83∕8, 81/2, 97∕8, 121/4 31∕8–28 31∕8–28 81/2, 121/4, 16 31∕8–28 121/4, 171/2

Recommended rotary speed, rpm

Size range, in.

M223 M223 S223 M223 S223 M223 M223 M223 S223 M223 M223 M223 M223 M223 M223 M223 S223 M223 M223 M223 M223 M223 M333 M233 M333 M333 M323 M223 M223 M323 M323 S223 M323 M223 S323 S223 M323 M333 M233 M333 M333 M223 M223 M323 M223 S223 M323 M223 M323 M323 M223 S223 M223 S223 M323 M323 M323 M323 M233 M233 M333 M223 M223 M323 M323 M323 M323 M223 M323 M343 M343 M333 M233 M233 M333 M333 M323 M323 M323 M323 M223 M323 M323 M323 M323 M223 M323

Recommended WOB, lb/in. diameter

IADC code

Manufacturer, Bit name/model number AT505 AT505F AT505S AT505X AT505FS AT505FX AT506 AT506F AT506S AT506X AT506FX AT507 AT507F AT605 AT605F AT605X AT605S AT606 AT606F AT606X AT607 AT607F HC405 HC406 HC407 HC505 HC505X HC505ZX HC506 HC507 HC605 HC605S HC605ZX HC606 HC606S HC606SX HC607 HCD405 HCD406 HCD406X HCD407 HCD505 HCD505Z HCD505ZX HCD506 HCD506S HCD506Z HCD506ZX HCD507 HCD605 HCD605Z HCD605S HCD606 HCD606S HCD606Z HCD606ZX HCD607 HCM605 Q405 Q406 Q407 Q505 Q506 Q506X Q507 Q605 Q605X Q606 Q607 QD205 QD205FX QD305 QD405 QD406 QD406FX QD407 QD505 QD505X QD506 QD506FXX QD506HX QD506X QD507 QD605 QD605X QD606 QD606X

500–2,500

60–400

DGMVW

500–2,500 500–2,500 500–2,500 500–2,500 500–2,500

60–400 60–400 60–400 60–400 60–400

DGMVW DGMVW DGMVW DGMVW DGMVW

500–2,500 500–2,500

60–400 60–400

DGMVW DGMVW

500–2,500

60–400

DGMVW

500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500

60–400 60–400 60–400 60–400 60–400 60–400 60–400

DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW

500–2,500 500–2,500 500–2,500

60–400 60–400 60–400

DGMVW DGMVW DGMVW

500–2,500 500–2,500 500–2,500

60–400 60–400 60–400

DGMVW DGMVW DGMVW

500–2,500 500–2,500 500–2,500

60–400 60–400 60–400

DGMVW DGMVW DGMVW

500–2,500 500–2,500 500–2,500 500–2,500

60–400 60–400 60–400 60–400

DGMVW DGMVW DGMVW DGMVW

500–2,500

60–400

DGMVW

500–2,500

60–400

DGMVW

500–2,500

60–400

DGMVW

500–2,500 500–2,500 500–2,500 500–2,500

60–400 60–400 60–400 60–400

DGMVW DGMVW DGMVW DGMVW

500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500

60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400

DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW

500–2,500

60–400

DGMVW

500–2,500 500–2,500

60–400 60–400

DGMVW DGMVW

250–3,000 250–3,000 250–3,000

60–350 60–350 60–350

DGHMVW DGHMVW DGHMVW

250–3,000

60–350

DGHMVW

250–3,000

60–350

DGHMVW

250–3,000

60–350

DGHMVW

250–3,500

60–350

DGHMVW

400–2,500 400–2,500 500–2,000 400–2,500 500–2,000 500–2,000 500–2,500 500–2,000

60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400

GHMIRSTUm GHMIRSTUm GHMIRSTUm GHMIRSTUm GHMIUm GHMIUm GHMIUm GHMIUm

500–3,000

45–300

MVWRst

M323 81/2 M323 83∕8–81/2 M323 121/4

500–3,000 500–3,000 500–3,000

45–300 45–300 45–300

MVWRst MVWRst MVWRst

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

M323 121/4 M323 121/4

500–3,000 500–3,000

45–300 45–300

MVWRst MVWRst

M323 16

500–3,000

45–300

MVWRst

M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M324 M324 M324 M324 M324

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

91/4 121/4 161/2 121/4 143/4 121/4 121/4 81/2 81/2 81/2 81/2 81/2 81/2 121/4 141/2 81/2–121/4 105∕8 121/4 171/2 81/2 121/4 121/4 81/2 16 121/4 81/2 171/2

M324 171/2

500–3,000

45–300

MVWRst

M324 M324 M324 M324 M324 M324 M324 M324 M324 M324 M324 M324 M324 M324 M324 M324 M324 M324 M324 M324 M325 M325 M331 M331 M332 M332 M332 M332 M332 M332 M332 M332 M332 M332

81/2 83/4 91/2 83/4–121/4 77∕8 97∕8 83/4 81/2 121/4 121/4 16 16 81/2 121/4 81/2 121/4 121/4–16 16 121/4 16 171/2 121/4 121/4 121/4 91/2 81/2 61∕8 57∕8–61∕8 63/4–83/4 81/2 83/4 65∕8 6 83/4

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

M332 M332 M332 M332 M332 M332

61∕8 63/4–83/4 63/4 83/4 83/4 83/4

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

45–300 45–300 45–300 45–300 45–300 45–300

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

M332 M332 M332 M332

61∕8–61/4 6–61/2 61/2–83/4 63/4–83/4

500–3,000 500–3,000 500–3,000 500–3,000

45–300 45–300 45–300 45–300

MVWRst MVWRst MVWRst MVWRst

MMD64RH MMD74D MMD74DC MMD74DH MMD84CM MMD84I MMD94D MMD94DC MME34DH MME64 MME64DH MMG64 MMG64H MMG84 CD193 CD193SB FC264UF FC3933 FCi204Li GT54 GT84D GTD64 GTD74 GTD94DIH GTE54 GTE54C GTE64C GTG64C MM54D MM54DC MM54DH MM54R MM54RH MM64 MM64M MM64R MM64RC MM64RH MM74D MM74DRM MM74M MM84D MM84DC MM84M MM84R MM94C MMD64D MMD64MH MMD84D MMD84DH MMD84DICH MMD84M MMD94 MMD94MH MME74 MME74H MME84D MME84M MMG64C MMG64M MMG74R MMG84M FC3047 GT74D GTE34DDCH MM54C MM64MR MM74DC MM74MR MM74R MM74RH MM84 MM84DH MM84H MM84RH MM94 MMD44DH MME74DC MME84DCH MMG34DDH M04D MM04D GTG93H MM53D

63/4 81/2–83/4 81/2 81/2 83/4 83∕8–81/2 83/4 83/4 81/2 61∕8 81/2 61∕8–91/2 91/2 91/2 81/2 81/2 81/2 83/4 81/2 61∕8 171/2 81/2 6 171/2 61∕8 61∕8 61∕8–81/2 61∕8 81/2–83/4 77∕8 61/2–91/2 61∕8–61/4 61/2 57∕8 81/2–83/4 61∕8–61/4 61/2 61/2 61∕8–141/2 97∕8 81/2 97∕8–121/4 97∕8 105∕8–121/4 83/4 121/4 61/4–81/2 91/2 81/2–161/2 143/4 121/4

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 250–3,500 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 50–150 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M334 M334 M334

105∕8 81/2 83∕8 81/2 81/2 81/2 105∕8 91/2 91/2 81/2–105∕8 105∕8–121/4 121/4 121/4 91/2

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

M334 M334 M334 M334 M334 M334 M334 M334 M334 M334 M334 M334 M334 M334

83/4 83/4 121/4 77∕8–97∕8 91/2 71/2 81/2 123∕8 121/4 121/4 121/4 61/2 121/4 121/4

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

Special features/ usage

M332 M332 M332 M332 M332 M332 M332 M332 M332 M332 M332 M332 M332 M332 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333 M333

Size range, in.

Recommended rotary speed, rpm

45–300 45–300 45–300 45–300 45–300 45–300

Recommended WOB, lb/in. diameter

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

121/4 81/2–83/4 121/4 121/4 81/2

IADC code

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

M323 121/4 M323 M323 M323 M323 M323

Manufacturer, Bit name/model number

45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300

Special features/ usage

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

Recommended rotary speed, rpm

81/2–121/4 141/2 121/4 121/4 81/2 121/4 81/2 83/4 121/4 121/4 81/2 97∕8–121/4 81/2–121/4 105∕8–121/4 121/4 83/4 83/4 83/4–121/4 81/2 83∕8–121/4 81/2–121/4 81/2–121/4 121/4–141/2 11 121/4 97∕8–105∕8 97∕8–105∕8 97∕8–121/4 85∕8 83/4–91/4 121/4–131∕8 16 17 121/4 97∕8 121/4–16 97∕8–121/4 105∕8 121/4 12 12 16 81/2 81/2–83/4

Recommended WOB, lb/in. diameter

M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323 M323

MMD65DMH MMD65DR MMD65R MMD66D MMD66DH MMD66DM MMD66H MMD75DIH MMD75DM MMD75RH MMD76H MMD85D MMD85H MMD86DH MME56D MME56R MME56RM MME65DH MME65R MME65R MME65RH MME65RM MME66 MME66D MME75 MME75DC MME75DH MME85 MMG55 MMG65DH MMG75D FC3555 GT85DH GTD65D GTD75I GTD85DCH GTD85DICH M36 MM45DC MM55DIH MM65DC MM65I MM65MR MM75C MM75IH MM86D MM95 MM95DH MM95R MMD55MC MMD75C MMD75I MMD76 MME65D MME76H MMG65D MMG76H GTD96D MMD95 FC204 FC204Li GTG64 M73 MM54 MM64 MM64D MM64DH MM64DM MM64H MMD54D MMD54DM MMD54H MMD54MR MMD54RM MMD64CM MMD64DC MMD64DCM MMD64DR MMD64H MMD64M MMD64MR

Size range, in.

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

IADC code

45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300

Manufacturer, Bit name/model number

Recommended rotary speed, rpm

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000

Special features/ usage

Recommended WOB, lb/in. diameter

61∕8 121/4 81/2 81/2 61/2 81/2 77∕8 81/2 81/2–85∕8 121/4 91/2–121/4 121/4 61∕8 81/2–83/4 83/4 81/2–83/4 81/2 77∕8–83/4 81/2 121/4 121/4 121/4 121/4 121/4 81/2–83/4 91/2 83/4 81/2 121/4 121/4 83/4 121/4 121/4 81/2 121/4 91/2 83/4 121/4

Size range, in.

M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M322 M323 M323 M323 M323 M323

IADC code

Manufacturer, Bit name/model number GTD45 GTD75H GTE65 GTE65H M55 M65D MM55C MM65DST MM65R MM66D MM75DH MM75H MMD45 MMD55DC MMD55M MMD56D MMD56H MMD65DC MMD65DH MMD75 MMD75DH MMD75H MMD75MR MMD96 MME55C MME55H MME55M MME56 MME75H MME75R MMG55C MMG75H MMG96H GT56MH GT75D GTD55DH GTD56 GTD65DMH GTD75 GTD75D GTE56D GTE56M GTE75 GTE75D M46 M55M M56D M85 MM46 MM55DC MM55DH MM55DM MM55DMH MM55M MM55RDC MM56D MM56RM MM65DMH MM65DRM MM65RH MM66DH MM66DM MM66H MM75DC MM75DM MM75DR MM75I MM75R MM75RH MM76D MM76DH MM76R MM85D MM85DH MM85DM MM85R MM85RH MM86H MM86R MM96D MMD46 MMD55DM MMD55H MMD55MH MMD65DM

M334 91/2

500–3,000

45–300

MVWRst

M335 M335 M342 M342

500–3,000 500–3,000 500–3,000 500–3,000

45–300 45–300 45–300 45–300

MVWRst MVWRst MVWRst MVWRst

121/4 121/4 6 61∕8

World Oil® / JANUARY 2017 D-23

D-24 2017 Drill Bit Classifier

SGADTR SGADTR SGADTR SGADTR SGADTR SGADTR SGADTR

KS1952 S323 41∕2–171∕2 KS1953 S323 41∕2–171∕2 PDC Logic PL513 M133 43/4

857–2,685 857–2,685

60–300 60–300

SGADTR SGADTR

500–4,500

350–50

PL613

M233 77∕8

500–4,500

350–50

PL616

M323 83/4

500–4,500

350–50

PL616

M423 77∕8, 81/2, 83/4, 121/4

500–4,500

350–50

PLd513 PLd513 PLd513 PLd516 PLd516 PLd613 PLd613 PLd613 PLd616 PLd619 PLs513 PLs516 PLs613 PLs613 PLs616 PLs616

M133 M233 M333 M323 M343 M133 M233 M332 M423 M323 M133 M323 M133 M233 M323 M423

500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500

350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50

DGHMWUmV DGHMWUmV DGHMWUmV DGHMWUmV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV

PLs711 PLs716 PLs719 PLt513 PLt516 PLt516 PLt613 PLt613 PLt616 PLt616

M243 M423 M423 M233 M323 M423 M133 M223 M323 M423

500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500

350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50

GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV

500–4,500 500–4,500 500–4,500

350–50 350–50 350–50

GHMWIRstV GHMWIRstV GHMWIRstV

1,000–6,000 Variable

GHMWUmV

1,000–6,000 Variable

GHMWUmV

61∕8, 61/4 61∕8 61/2 77∕8, 81/2, 83/4 83/4 61∕8 83/4 77∕8, 81/2, 83/4, 97∕8 83/4, 121/4 81/2 61∕8, 63/4 77∕8, 81/2, 83/4 6, 61∕8 77∕8 81/2 77∕8, 81/2, 83/4, 97∕8, 105∕8, 11, 121/4 6, 61∕8 121/4 83/4 61∕8 77∕8, 81/2, 83/4 83/4 6 61∕8 77∕8, 81/2, 83/4, 97∕8 77∕8, 81/2, 83/4, 97∕8, 105∕8, 11, 121/4 77∕8, 81/2, 83/4 121/4 121/4

PLt619 M323 PLt619 M423 PLt716 M423 ReedHycalog Bits DS711 M232, 57∕8, 6, 61∕8, 61/4, 63/4 M233, M322, M332 DS713 M232, 55∕8, 57∕8, 6, 61∕8, 61/4, M233, 61/2, 63/4, 77∕8, 81/2, M332, 83/4, 121/4 M432, M433, S332 DS716 M422, 77∕8, 81/2, 83/4, M432, 97∕8,121/4 M442, S422, S423 DS719 M421, 121/4, 16 M423 SK719 S422, 16, 17 S423 SK508 M242 61∕8 SK511

SK513

M123, 31/2, 4 ∕8, 4 ∕8, 43/4, M132, 47∕8, 61∕8, 61/4, 63/4 M133, S132, S342 M122, 47∕8, 51/2, 55∕8, 53/4, M132, 57∕8, 6, 61∕8, 61/4, M133, 61/2, 63/4, 77∕8, M222, 81/2, 83/4 M232, M233, M234, M322, M332, M333, M422, M432, S132, S232, S332, S422 1

5

SK516

SK519

SK611 SK613

SK616

SK619 1,000–6,000 Variable

GHMWUmV

1,000–6,000 Variable

GHMWUmV

SK711

GHMWUmVRst GHMWUmVRst

SK713

1,000–6,000 Variable 1,000–6,000 Variable 1,000–6,000 Variable

1,000–6,000 Variable

GHMWUmVRst SK716

SK811 SK813

SK816

SK819

M122, 57∕8, 6, 61∕8, 61/4, 61/2, M222, 63/4, 77∕8, 83∕8, 81/2, M223, 85∕8, 82∕3, 83/4, 91/2, M232, 97∕8, 105∕8, 121/4 M234, M322, M323, M332, M422, M424, S122, S222, S224, S322, S333, S422 M122, 61∕8, 77∕8, 81/2, 83/4, M222, 97∕8, 105∕8, 115∕8, M223, 121/4, 143/4, 16, M322, 161/2, 17, 171/2, 23, M323, 24, 26 M332, M422, M423, S222, S322, S323, S422, S423, S432 M132, 61∕8, 77∕8, 81/2, 83/4 M332, M432 M132, 51/2, 55∕8, 53/4, 57∕8, 6, M133, 61∕8, 61/4, 61/2, 63/4, M222, 77∕8, 83∕8, 81/2, 82∕3, M232, 83/4, 97∕8, 121/4 M234, M322, M332, M432, M433, M434, S133, S232, S332, S432, S433 M222, 6, 61∕8, 77∕8, 81/4, 83∕8, M322, 81/2, 83/4, 91/2, 97∕8, M333, 101/4, 101/2, 105∕8, M422, 11, 115∕8, 12, 121/4, M423, 121/2, 141/2, 143/4, M432, 16, 17, 171/2, 181∕8 S322, S422, S433 M222, 83∕8, 81/2, 83/4, 121/4, M422, 131/2, 16, 161/2, 17, M423, 171/2, 181∕8 M432, M433, S223, S422, S424, S432 M222, 53/4, 57∕8, 6, 61∕8, 61/4, M232, 61/2, 63/4, 77∕8 M332, M432, S432 M232, 57∕8, 6, 61∕8, 63/4, 83∕8, M233, 81/2, 83/4, 97∕8, 121/4, M234, 143/4, 17 M322, M332, M422, M432, M433, S232 M322, 77∕8, 81/2, 85∕8, 83/4, M422, 91/2, 97∕8, 105∕8, M423, 115∕8, 12, 121/4, S422, 131∕8, 131/2, 141/2, S423 143/4, 16, 161/2, 17, 171/2, 181∕8, 181/2 M332 61∕8, 61/2, 63/4,

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

SGADTR SGADTR SGADTR SGADTR SGADTR SGADTR SGADTR

Special features/ usage

60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300 60–300

Recommended rotary speed, rpm

857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685 857–2,685

Recommended WOB, lb/in. diameter

57∕8–171∕2 57∕8–171∕2 57∕8–171∕2 57∕8–171∕2 57∕8–171∕2 57∕8–171∕2 57∕8–171∕2 81∕2 41∕2–81∕2 41∕2–171∕2 41∕2–171∕2 81∕2–171∕2 81∕2–171∕2 41∕2–171∕2 41∕2–171∕2

Size range, in.

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

IADC code

45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–300 45–301 45–301 45–301 45–301 50–150 50–150 50–150 50–150 50–150 45–300 45–300 45–300 45–300

Manufacturer, Bit name/model number

Recommended rotary speed, rpm

500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,000 500–3,001 500–3,001 500–3,001 500–3,001 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 500–3,000 500–3,000 500–3,000 500–3,000

Special features/ usage

Recommended WOB, lb/in. diameter

6–61∕8 6 43/4–5 61∕8 61∕8 63/4 61∕8 61/2 61∕8 6 61∕8 81/2 77∕8 77∕8 41/2 57∕8 63/4 57∕8 55∕8 85∕8 16 121/4 81/2 171/2 91/2 171/2 91/2 81/2 121/4 65∕8 121/4 121/4 9 121/4 22 22 81/2 81/2 81/2 81/2 85∕8 121/4 91/2 121/4 121/4 91/2 97∕8 105∕8 121/4 171/2 171/2 61∕8 83/4 22 181∕8 16 61∕8 81/2 6 61∕8 121/4 121/4 81/2 81/2–91/2 81/2–91/2 81/2 81/2 91/2 81/2–121/4 61/2 23/4

Size range, in.

IADC code

Manufacturer, Bit name/model number

MM73 M342 MM73 M342 MMD53C M342 MMD63 M342 MMD63H M342 MMD63M M342 MMD73 M342 MMD73H M342 MME63 M342 MME93H M342 MM43D M343 MM73R M343 MM83 M343 MM83D M343 MM92 M343 MME73D M343 MMG73 M343 MMG73D M343 MM73i M345 SF65D S322 SFD75DIH S322 SFD75H S322 SFE65CH S322 SFG86D S322 GTD55Ds S323 GTD66Ds S323 S55 S323 SF46H S323 SF55DH S323 SF55H S323 SF56DH S323 SF65DH S323 SF65R S323 SF66D S323 SF96DH S323 SF96H S323 SFD46H S323 SFD55C S323 SFD55D S323 SFD55MH S323 SFD65C S323 SFD66CH S323 SFE56H S323 SFE65DMH S323 SFE66DH S323 SFG55DH S323 SFG56 S323 SFG65RH S323 GT65DCKs S324 GTD85DHs S324 GTE85DHs S324 SF45 S324 SF75C S324 SF86DH S324 SF96 S324 SF96RH S324 SFE45 S324 SFE55DH S324 SF54H S332 SF64 S332 SFD74D S332 SFD75RH S332 SD74 S333 SF54D S333 SFD54D S333 SFD64C S333 SFG54H S333 FC3647A S334 SF64DH S334 SFG63 S343 SF32 S344 Kingdream KM1363 M333 KM1372 M333 KM1662 M323 KM1663 M323 KM1673 M323 KM1952 M323 KM1953 M323 KM1365 M432 KS1052 S424 KS1355 S323 KS1362 S333 KS1382 S333 KS1392 S434 KS1653 S323 KS1662 S323

1,000–6,000 Variable

GHMWUmVRst

1,000–6,000 Variable

GHMWUmVRst

1,000–6,000 Variable

GHMWUmVRst

1,000–6,000 Variable

GHMWUmVRst

1,000–6,000 Variable

GHMWUmVRst

1,000–6,000 Variable

GHMWUmVRst

1,000–6,000 Variable

GHMWUmVRst

1,000–6,000 Variable

GHMWUmVRst

1,000–6,000 Variable

GHMWUmVRst

1,000–6,000 Variable

GHMWUmVRst GHMWUmVRst

M422, 83∕8, 81/2, 83/4, 105∕8, 1,000–6,000 Variable M423, 121/4, 143/4, 16, M432, 161/2, 171/2 M433, M442, S432 M422, 83∕8, 121/4, 141/2, 16, 1,000–6,000 Variable M423, 161/2, 17, 171/2, M432, 181∕8, 181/2, 26 M433, S422, S423, S432, S433 M422, 12, 121/4, 143/4, 1,000–6,000 Variable M432, 171/2, 181/2 S422

GHMWUmVRst

GHMWUmVRst

DS313 SK1019 SK919 TK56

TK59 TK61 TK 63 TK66

Smith Bits M09 M20

M332, 63/4, 81/2, 83/4 M333, M433 M222, 61∕8, 75∕8, 83∕8, 81/2, M232, 85∕8, 83/4, 115∕8, M323, 121/4, 131/2, 16, M324, 171/2 M422, M423, M424, S222, S322, S422, S423

1,000–6,000 Variable

3 ∕8

1,000–6,000 1,000–6,000 1,000–6,000 1,000–6,000

6 ∕8

GHMWUmVRst

1,000–6,000 Variable

GHMWUmVRst GHMWUmVRst

1,000–6,000 Variable

60–400 60–400

500–4,000

60–400

500–5,000

60–400

M613

M442 31/2, 35∕8, 33/4, 37∕8, 41∕8, 41/2, 45∕8, 43/4 M333 51/2, 57∕8, 6, 61∕8

M713

M333 5 ∕8, 6 ∕8

500–4,000

60–400

M909

1

M442 4 ∕8

500–5,000

60–400

MA613

61∕8

500–4,000

60–400

MA813

6

500–4,000

60–400

500–4,000

500–4,000

60–400

60–400

MASI613

83/4

500–4,000

60–400

MASIZ513

83/4

500–4,000

60–400

MCR509

35∕8

500–5,000

60–400

MD611 MD713

63/4

500–4,500

81/2

500–4,000

60–400 60–400

MDI313

81/2, 83/4

500–4,000

60–400

MDI413

53/4, 6, 61∕8

500–4,000

60–400

MDI511

6, 61∕8, 63/4

500–4,500

60–400

MDI513 MDI611

M233 5 ∕8, 6, 6 ∕8, 61/4, 61/2, 500–4,000 65∕8, 63/4, 77∕8, 81/2, 85∕8, 83/4 6, 61∕8, 65∕8, 81/2, 83/4 500–4,500 7

1

60–400

MDI711

500–4,500

60–400

MDI713

M333 55∕8, 57∕8, 6, 81/2

500–4,000

60–400

500–4,500

60–400

MDI811

61/2

MDI813

500–4,000

60–400

M333 5, 51/4, 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 75∕8, 77∕8, 81/2, 85∕8, 83/4, 91/2, 97∕8, 115∕8 M333 6, 61∕8, 63/4, 83/4

MDI613

60–400

M333 81/2, 121/4, 141/2, 143/4, 16, 161/2 MDIR613 61∕8

500–4,000

60–400

500–4,000

60–400

MDIZ413

6

500–4,000

60–400

MDIZ513

61∕8, 81/2

500–4,000

60–400

MDIZ613

6, 61∕8, 63/4, 83/4

500–4,000

60–400

MDIZ713

81/2

500–4,000

60–400

GHMNRstUhVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW

GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

63/4

500–4,000

60–400

MDSI509

57∕8, 61∕8

500–5,000

60–400

MDSI513

57∕8, 6, 61∕8, 63/4, 81/2 500–4,000

60–400

MDSI611

83/4

500–4,500

60–400

MDSI613 M333 53/4, 57∕8, 6, 61∕8, 500–4,000 61/4, 63/4, 77∕8, 81/2, 83/4, 91/2, 97∕8, 105∕8, 121/4 MDSI711 6, 61/4, 81/2, 83/4 500–4,500

60–400

53/4, 57∕8, 6, 61∕8, 7, 77∕8, 83∕8, 81/2, 85∕8, 83/4, 97∕8, 121/4 61/2

60–400

500–4,000

60–400

500–4,500

60–400

MDSI813 M333 83∕8, 81/2, 83/4, 101/4, 500–4,000 105∕8, 121/4, 143/4 MDSI913 81/2, 83/4 500–4,000

60–400

MDSIR513

60–400

MDSI713 MDSI811

MDSIZ613

6 ∕8

500–4,000

5

57∕8, 6, 61∕8, 61/4, 65∕8, 500–4,000 83/4, 131/2 6, 61∕8, 63/4, 81/2 500–4,000 81/2, 85∕8, 83/4, 105∕8, 500–4,000 121/4, 143/4 500–4,000 57∕8, 61∕8 53/4, 6, 61∕8, 81/2

500–4,000

60–400

60–400 60–400 60–400 60–400 60–400

MDSIZ713

57∕8, 81/2, 121/4

500–4,000

60–400

MDSIZ811

61/2

500–4,500

60–400

MDSIZ813 MDSXI613

121/4

500–4,000

81/2

500–4,000

60–400 60–400

MDSXI713

81/2

500–4,000

60–400

MDSXI813

81/2

500–4,000

60–400

MDSXIZ713 MDX613 MDXI713 MDZI513 MDZI613 MDZI713 MDZI813 MDZIR813 MDZIZ513

81/2

500–4,000

61∕8

500–4,000

81/2

500–4,000

61∕8

500–4,000

6, 61∕8, 61/2, 83/4 83/4, 105∕8 83/4

500–4,000 500–4,000 500–4,000

83∕8

500–4,000

6

500–4,000

MDZSI513

6

MDZSI813

81/2, 8 ∕8 5

60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400

500–4,000

60–400

500–4,000

60–400

MDZXI713

81/2

500–4,000

60–400

MDZXIZ713

81/2, 105∕8

500–4,000

60–400

MI413 MI513 MI609 MI613 MI711 MI813 MI909 MI913 MIZ613 MIZ813 MR613

61∕8, 61/4, 61/2 M223 43∕8, 61∕8, 61/4 4 ∕8, 41/4 1

500–4,000 500–4,000

60–400

500–5,000

60–400

M233 6, 61∕8, 61/4, 65∕8, 63/4, 500–4,000 77∕8, 83/4, 121/4 M333 6 500–4,500 M333 61/2, 81/2, 85∕8, 121/4 41∕8 M433 81/2, 85∕8, 115∕8 61/2 85∕8 57∕8

60–400

500–4,000 500–5,000

60–400 60–400 60–400 60–400

500–4,000

60–400

500–4,000

60–400

500–4,000 500–4,000

60–400 60–400

GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

500–4,000

60–400

MS613

57∕8

500–4,000

60–400

IADC code

MS713

57∕8, 121/4

500–4,000

60–400

MSI413

6, 63/4

500–4,000

60–400

MSI513

M333 6 ∕8, 61/4, 83/4

500–4,000

60–400

500–4,000

60–400

1

M433 6, 61∕8, 61/4, 61/2, 65∕8, 63/4, 77∕8, 81/2, 83/4, 121/4 MSI711 M433 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4 MSI713 M433 6, 61∕8, 61/4, 61/2, 63/4, 81/2, 83/4, 97∕8, 105∕8, 121/4 MSI813 M433 6, 61∕8, 81/2, 83/4, 97∕8, 121/4 MSIR513 61∕8

MSI613

500–4,500

60–400

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

MSIR613

6, 61∕8, 61/4, 61/2

500–4,000

60–400

MSIR713

61∕8, 81/2

500–4,000

60–400

MSIZ413

63/4

500–4,000

60–400

MSIZ513

61/4

500–4,000

60–400

MSIZ613

61∕8, 63/4

500–4,000

60–400

MSIZ713

81/2

500–4,000

60–400

MSIZ813

81/2, 83/4

500–4,000

60–400

MST913

57∕8, 83∕8, 81/2

500–4,000

60–400

MSXI613

6, 81/2

500–4,000

60–400

MSXI713

6

500–4,000

60–400

MSXIZ616

81/2

500–4,000

60–400

MSZ713

57∕8

500–4,000

60–400

MSZIZ813

81/2

500–4,000

60–400

MZ713

57∕8

500–4,000

60–400

MZI813

81/2

500–4,000

60–400

MZIR813

81/2

500–4,000

60–400

MZR813

3

8 ∕8

500–4,000

60–400

MZSI613

77∕8

500–4,000

60–400

MZXIR813

81/2

500–4,000

60–400

R35Y

57∕8, 83∕8

500–4,000

60–400

R509

61∕8

500–5,000

60–400

R513

6 ∕8, 63/4

500–4,000

60–400

R613

6, 61∕8, 61/4, 83/4

500–4,000

60–400

R616

61/4, 81/2, 83/4, 97∕8, 131/2 63/4

500–4,000

60–400

R713

500–4,000

60–400

R813

81/2, 83/4, 143/4

500–4,000

60–400

S413

33/4

500–4,000

60–400

S909

41∕8, 41/2, 45∕8

500–5,000

60–400

SDAI513

81/2

500–4,000

60–400

SDI313

81/2, 83/4

500–4,000

60–400

SDI413

6 ∕8

500–4,000

60–400

SDI511

61/4, 63/4

500–4,500

60–400

SDI513

60–400

SDI613

6, 61∕8, 61/4, 61/2, 63/4, 500–4,000 77∕8, 81/2, 85∕8, 83/4 6, 61/4, 63/4, 77∕8, 81/2, 500–4,500 83/4, 97∕8 6, 61∕8, 63/4, 81/2, 83/4 500–4,000

60–400

SDI711

6, 61∕8, 61/4, 63/4

500–4,500

60–400

SDIZ513

61∕8, 81/2

500–4,000

60–400

SDIZ611

83/4

500–4,500

60–400

SDI611

1

1

60–400

Special features/ usage

61∕8

Size range, in.

MS413

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number MDSI413

MDSIZ513

M223 41/2, 61∕8

MASI513 M233 83/4

60–400

MDSIR813

M609

1

500–4,000

MDSIR713

M513

7

GHMWUmVRst

55∕8

MDSIR613

500–4,500

1

GHMWUmVRst

1,000–6,000 Variable

500–5,000

7

Variable Variable Variable Variable

MDS713

Recommended rotary speed, rpm

1,000–6,000 Variable 1,000–6,000 Variable

Recommended WOB, lb/in. diameter

M433 16 M423, 121/4, 16, 23 S423, S432 S132 37∕8 M422 171/2 S423 22 M122, 57∕8, 6, 61/4, 81/2, M123, 8.689, 83/4, 115∕8 M222, M332, M424, S222, S322, S432 S222, 81/2, 121/4, 16, 171/2 S224, S422 S132 63/4

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number SK916 DS819

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW

World Oil® / JANUARY 2017 D-25

500–4,000

60–400

16

500–4,000

60–400

SSI513

61∕8

500–4,000

60–400

SSIZ516

121/4

500–4,000

60–400

SST1213

121/4

500–4,000

60–400

SST913

81/2

500–4,000

60–400

TBRS613

500–4,000

60–400

VIS613

57∕8, 6, 61∕8, 63/4, 77∕8, 83∕8, 81/2, 83/4, 97∕8, 105∕8 85∕8

500–4,000

60–400

XS716

121/4

500–4,000

60–400

Z513

57∕8, 6, 61∕8, 63/4

500–4,000

60–400

Z613

53∕8, 57∕8, 6, 61∕8, 500–4,000 61/4, 61/2, 63/4, 77∕8, 81/2, 83/4 83∕8, 81/2, 83/4, 105∕8, 500–4,000 171/2 81/2, 121/4 500–4,000

60–400

60–400

ZR713

81/2, 85∕8, 83/4, 121/4, 500–4,000 171/2 83∕8 500–4,000

60–400

ZR813

83∕8, 81/2

500–4,000

60–400

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2

500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

IADC code

Z713 Z8 Z813

Ulterra U509M U509M CF U509M U509M CF U509M U509M CF U509M U509M CF U509M U509M CF U509M U509M CF U509M U509M CF U509M U509M CF U509M U509M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M

M242 M242 M243 M243 M244 M244 M342 M342 M343 M343 M344 M344 M442 M442 M443 M443 M444 M444 M132 M132 M133 M133 M134 M134 M232 M232 M233 M233 M234 M234 M332 M332 M333 M333 M334 M334 M432 M432 M433 M433 M434 M434 M122 M122 M123 M123 M124 M124 M222

D-26 2017 Drill Bit Classifier

60–400 60–400

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU

Special features/ usage

71/2

SI913

Recommended rotary speed, rpm

SHOI513

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2

Recommended WOB, lb/in. diameter

60–400

M224 M224 M322 M322 M323 M323 M324 M324 M422 M422 M423 M423 M424 M424 M222 M222 M223 M223 M224 M224 M322 M322 M323 M323 M324 M324 M422 M422 M423 M423 M424 M424 M242 M242 M243 M243 M244 M244 M342 M342 M343 M343 M344 M344 M442 M442 M443 M443 M444 M444 M132 M132 M133 M133 M134 M134 M232 M232 M233 M233 M234 M234 M332 M332 M333 M333 M334 M334 M432 M432 M433 M433 M434 M434 M122 M122 M123 M123 M124 M124 M222 M222 M223 M223 M224 M224 M322

Size range, in.

60–400

500–4,000

U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U619M U619M CF U619M U619M CF U619M U619M CF U619M U619M CF U619M U619M CF U619M U619M CF U619M U619M CF U619M U619M CF U619M U619M CF U709M U709M CF U709M U709M CF U709M U709M CF U709M U709M CF U709M U709M CF U709M U709M CF U709M U709M CF U709M U709M CF U709M U709M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U716M U716M CF U716M U716M CF U716M U716M CF U716M U716M CF U716M U716M CF U716M U716M CF U716M

IADC code

500–4,000

81/2

BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU

Manufacturer, Bit name/model number

81/2

SDXIZ513

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

Special features/ usage

SDSI713

500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500

Recommended rotary speed, rpm

60–400

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2

Recommended WOB, lb/in. diameter

500–4,000

M222 M223 M223 M224 M224 M322 M322 M323 M323 M324 M324 M422 M422 M423 M423 M424 M424 M222 M222 M223 M223 M224 M224 M322 M322 M323 M323 M324 M324 M422 M422 M423 M423 M424 M424 M242 M242 M243 M243 M244 M244 M342 M342 M343 M343 M344 M344 M442 M442 M443 M443 M444 M444 M132 M132 M133 M133 M134 M134 M232 M232 M233 M233 M234 M234 M332 M332 M333 M333 M334 M334 M432 M432 M433 M433 M434 M434 M122 M122 M123 M123 M124 M124 M222 M222 M223 M223

Size range, in.

6 ∕8

U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF

IADC code

SDSI613

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

Manufacturer, Bit name/model number

Recommended rotary speed, rpm 60–400

Special features/ usage

Recommended WOB, lb/in. diameter 500–4,000

1

Size range, in. 81/2

Manufacturer, Bit name/model number SDSI413

500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU

500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500

BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU

U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U619S

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

S442 S442 S443 S443 S443 S444 S444 S444 S132 S132 S132 S133 S133 S133 S134 S134 S134 S232 S232 S232 S233 S233 S233 S234 S234 S234 S332 S332 S332 S333 S333 S333 S334 S334 S334 S432 S432 S432 S433 S433 S433 S434 S434 S434 S122 S122 S122 S123 S123 S123 S124 S124 S124 S222 S222 S222 S223 S223 S223 S224 S224 S224 S322 S322 S322 S323 S323 S323 S324 S324 S324 S422 S422 S422 S423 S423 S423 S424 S424 S424 S222 S222 S222 S223 S223 S223 S224

23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Special features/ usage

23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Recommended rotary speed, rpm

S433 S433 S434 S434 S434 S122 S122 S122 S123 S123 S123 S124 S124 S124 S222 S222 S222 S223 S223 S223 S224 S224 S224 S322 S322 S322 S323 S323 S323 S324 S324 S324 S422 S422 S422 S423 S423 S423 S424 S424 S424 S222 S222 S222 S223 S223 S223 S224 S224 S224 S322 S322 S322 S323 S323 S323 S324 S324 S324 S422 S422 S422 S423 S423 S423 S424 S424 S424 S242 S242 S242 S243 S243 S243 S244 S244 S244 S342 S342 S342 S343 S343 S343 S344 S344 S344 S442

Recommended WOB, lb/in. diameter

U513S CF U513S FB U513S U513S CF U513S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S

Recommended WOB, lb/in. diameter

BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU

Size range, in.

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

IADC code

Special features/ usage

500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500

Manufacturer, Bit name/model number

Recommended rotary speed, rpm

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Recommended WOB, lb/in. diameter

M322 M323 M323 M324 M324 M422 M422 M423 M423 M424 M424 M222 M222 M223 M223 M224 M224 M322 M322 M323 M323 M324 M324 M422 M422 M423 M423 M424 M424 S242 S242 S242 S243 S243 S243 S244 S244 S244 S342 S342 S342 S343 S343 S343 S344 S344 S344 S442 S442 S442 S443 S443 S443 S444 S444 S444 S132 S132 S132 S133 S133 S133 S134 S134 S134 S232 S232 S232 S233 S233 S233 S234 S234 S234 S332 S332 S332 S333 S333 S333 S334 S334 S334 S432 S432 S432 S433

Size range, in.

IADC code

Manufacturer, Bit name/model number U716M CF U716M U716M CF U716M U716M CF U716M U716M CF U716M U716M CF U716M U716M CF U719M U719M CF U719M U719M CF U719M U719M CF U719M U719M CF U719M U719M CF U719M U719M CF U719M U719M CF U719M U719M CF U719M U719M CF U509S U509S CF U509S FB U509S U509S CF U509S FB U509S U509S CF U509S FB U509S U509S CF U509S FB U509S U509S CF U509S FB U509S U509S CF U509S FB U509S U509S CF U509S FB U509S U509S CF U509S FB U509S U509S CF U509S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S

500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU

World Oil® / JANUARY 2017 D-27

D-28 2017 Drill Bit Classifier

V613

V713

V516

V616

V716

23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

M233, 41∕8, 43/4, 47∕8, 51/4, S233 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 77∕8, 81/2, 83/4, 97∕8, 105∕8, 121/4, 143/4 M333, 31/4, 35∕8, 41∕8, 43/4, S333  47∕8, 51/4, 53∕8, 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 7, 71/2, 77∕8, 81/2, 83/4, 97∕8, 105∕8, 115∕8, 121/4, 14, 143/4 M323, 55∕8, 53/4, 57∕8, 6, 61∕8, S323 61/4, 65∕8, 77∕8, 83∕8, 81/2, 85∕8, 91/2, 97∕8, 105∕8, 115∕8, 121/4 M323, 6, 61∕8, 61/4, 61/2, 63/4, S323 75∕8, 77∕8, 81/2, 85∕8, 83/4, 97∕8, 105∕8, 11, 115∕8, 121/4, 131∕8 M423, 6, 61∕8, 61/4, 61/2, S423 63/4, 75∕8, 77∕8, 83∕8, 81/2, 85∕8, 83/4, 91/2, 97∕8, 105∕8, 11, 12, 115∕8, 113/4, 121/4, 131∕8, 141/2, 143/4, 151/2, 16, 17, 171/2, 23, 26 M422, 77∕8, 83∕8, 81/2, 85∕8, S422 83/4, 91/2, 97∕8, 103∕8, 105∕8, 11, 115∕8, 12, 121/4, 131∕8, 143/4, 16, 171/2

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU

500–3,000

50–400

BGTPDG1G2G3LHNOUXR

500–3,000

50–400

BGTPDG1G2G3LHNOUXR

500–3,000

50–400

BGTPDG1G2G3LHNOUXR

500–3,000

50–400

BGTPDG1G2G3LHNOUXR

500–3,000

50–400

BGTPDG1G2G3LHNOUXR

500–3,000

50–400

BGTPDG1G2G3LHNOUXR

V619

V719 R513

R613

R713

R516

R616

R716

R619

R719

BGTPDG1G2G3LHNOUXR

50–400

500–3,000

50–400

BGTPDG1G2G3LHNOUXR BGTPDG1G2G3LHNOUXR

500–3,000

50–400

BGTPDG1G2G3LHNOUXR

500–3,000

50–400

BGTPDG1G2G3LHNOUXR

500–3,000

50–400

BGTPDG1G2G3LHNOUXR

500–3,000

50–400

BGTPDG1G2G3LHNOUXR

500–3,000

50–400

BGTPDG1G2G3LHNOUXR

500–3,000

50–400

BGTPDG1G2G3LHNOUXR

500–3,000

50–400

BGTPDG1G2G3LHNOUXR BGTPDG1G2G3LHNOUXR BGTPDG1G2G3LHNOUXR BGTPDG1G2G3LHNOUXR BGTPDG1G2G3LHNOUXR BGTPDG1G2G3LHNOUXR

M223, 41∕8, 43/4, 47∕8, 51/4, S223   55∕8, 53/4, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 77∕8, 81/2, 83/4, 97∕8, 105∕8, 121/4, 143/4 M333, 31/4, 35∕8, 41∕8, 43/4, S333 47∕8, 51/4, 53∕8, 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4, 7, 71/2, 77∕8, 81/2, 83/4, 97∕8, 105∕8, 115∕8, 121/4, 14, 143/4 M323, 55∕8, 53/4, 57∕8, 6, 61∕8, S323 61/4, 65∕8, 77∕8, 83∕8, 81/2, 85∕8, 91/2, 97∕8, 105∕8, 115∕8, 121/4 M323, 6, 61∕8, 61/4, 61/2, 63/4, S323 75∕8, 77∕8, 81/2, 85∕8, 83/4, 97∕8, 105∕8, 11, 115∕8, 121/4, 131∕8 M423, 6, 61∕8, 61/4, 61/2, S423 63/4, 75∕8, 77∕8, 83∕8, 81/2, 85∕8, 83/4, 91/2, 97∕8, 105∕8, 11, 12, 115∕8, 113/4, 121/4, 131∕8, 141/2, 143/4, 151/2, 16, 17, 171/2, 23, 26 M422, 77∕8, 83∕8, 81/2, 85∕8, S422 83/4, 91/2, 97∕8, 103∕8, 105∕8, 11, 115∕8, 12, 121/4, 131∕8, 143/4, 16, 171/2 M323, 77∕8, 83∕8, 81/2, 83/4, S323 97∕8, 105∕8, 115∕8, 121/4, 131/2, 143/4, 151/2, 16, 17, 171/2, 181/2, 26 M323, 77∕8, 81/2, 83/4, 105∕8, S323 121/4, 16, 17, 171/2

DE616

M323 77∕8, 81/2, 83/4, 121/4

500–3,000

50–400

DE619

M323 121/4

500–3,000

50–400

DE713

M433 63/4, 77∕8, 83/4, 97∕8, 105∕8

500–3,000

50–400

DE716

M423 77∕8, 83/4, 121/4

500–3,000

50–400

DE813

M433 57∕8, 77∕8, 83/4

500–3,000

50–400

Tri–Max EWD DTS

ReedHycalog Bits CSD5211 CSD5213 CSD5311 CSD5413 PSD5213 PSD5311

43∕8×6, 6×71/4, 81/2×97∕8, 105∕8×123/4, 121/4×143/4, 143/4×171/2, 171/2×23 Bi–center PDC drill bits

Underream while drilling

3,000–18,000 3,000–18,000 3,000–18,000 3,000–24,500 3,000–27,500 3,000–18,000

80–200 80–200 80–200 80–200 80–200 80–200

GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm

Size Dependent

80–200

GHMWUm

3,000–27,000 3,000–35,000 Size Dependent 3,000–35,000 3,000–28,500 3,000–35,000 3,000–37,500 3,000–3,500 3,000–3,500

80–200 80–200 80–200

GHMWUm GHMWUm GHMWUm

PSD5416 121/4×131/2 80–200 PSD5513 81/2×91/4 80–200 PSD5516 121/4×13 80–200 PSD5613 141/2×16 80–200 SB5208 S422 81/2×91/4 80–200 SB5213 S422 121/4×131/2, 80–200 81/2×91/4, 81/2×97∕8 SB5216 S422 141/2×171/2 3,000–3,500 80–200 Smith Bits QDM4209 3 500–4,000 60–400

GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm GHMWUm

PSD5313 PSD5316 PSD5319 PSD5413

6×7 61/2×71/2 61/2×71/2 81/2×91/2 121/4×143/4 51/4×6, 53/4×61/2, 57∕8×63/4, 6×7 71/2×81/2, 105∕8×121/4, 121/4×141/2 91/4×101/4 121/4×141/4 81/2×91/2, 103∕8×121∕8

Special features/ usage

50–400

Size range, in.

M233, 77∕8, 83∕8, 81/2, 83/4, 500–3,000 S233 97∕8, 105∕8, 115∕8, 121/4, 131/2, 143/4, 151/2, 16, 17, 171/2, 181/2, 26 M323, 77∕8, 81/2, 83/4, 105∕8, 500–3,000 S323 121/4, 16, 17, 171/2

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500

Recommended rotary speed, rpm

S123 S123 S124 S124 S124 S222 S222 S222 S223 S223 S223 S224 S224 S224 S322 S322 S322 S323 S323 S323 S324 S324 S324 S422 S422 S422 S423 S423 S423 S424 S424 S424 S222 S222 S222 S223 S223 S223 S224 S224 S224 S322 S322 S322 S323 S323 S323 S324 S324 S324 S422 S422 S422 S423 S423 S423 S424 S424 S424

Recommended WOB, lb/in. diameter

U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U719S U719S CF U719S FB U719S U719S CF U719S FB U719S U719S CF U719S FB U719S U719S CF U719S FB U719S U719S CF U719S FB U719S U719S CF U719S FB U719S U719S CF U719S FB U719S U719S CF U719S FB U719S U719S CF U719S FB Varel V513

Recommended WOB, lb/in. diameter

BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU

Size range, in.

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

IADC code

500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500

Manufacturer, Bit name/model number

Special features/ usage

23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Recommended rotary speed, rpm

S224 S224 S322 S322 S322 S323 S323 S323 S324 S324 S324 S422 S422 S422 S423 S423 S423 S424 S424 S424 S242 S242 S242 S243 S243 S243 S244 S244 S244 S342 S342 S342 S343 S343 S343 S344 S344 S344 S442 S442 S442 S443 S443 S443 S444 S444 S444 S132 S132 S132 S133 S133 S133 S134 S134 S134 S232 S232 S232 S233 S233 S233 S234 S234 S234 S332 S332 S332 S333 S333 S333 S334 S334 S334 S432 S432 S432 S433 S433 S433 S434 S434 S434 S122 S122 S122 S123

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number U619S CF U619S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U709S U709S CF U709S FB U709S U709S CF U709S FB U709S U709S CF U709S FB U709S U709S CF U709S FB U709S U709S CF U709S FB U709S U709S CF U709S FB U709S U709S CF U709S FB U709S U709S CF U709S FB U709S U709S CF U709S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U716S U716S CF U716S FB U716S

GHMWUm GHMNRstUhVW

3, 4 ∕8

500–4,000

60–400

71/2

200–3,500

60–400

QDS3209

55∕8

500–4,000

60–400

QDS4209

7

500–4,000

60–400

QDS4213

7

200–3,500

60–400

QDS7313 S333 131/2

200–3,500

60–400

QDSI6213

200–3,500

60–400

Varel VH613 VH713

VH813

61/4

M323 35∕8×4, 43/4×55∕8, 500–2,500 53/4×65∕8, 57∕8×7, 6×61/2, 61∕8×71/4 M323 55∕8×61/4, 53/4×65∕8, 500–2,500 57∕8×65∕8, 61∕8×71/4, 81/2×10, 101/2×121/4, 105∕8×121/4 M423 71/2×81/2 500–2,500 PDC coring bits

100–400 BGDHNOUXR

Bit–Tech DG–420F M622 13∕4, 17∕8, 21∕8, 21∕4, 27∕16, 35∕8, 41∕2, 43∕4, 61∕8, 61∕4, 61∕2, 63∕4 DN–303 M713 41∕2–43∕4, 51∕2–61∕2 DN–333 M713 41∕2–43∕4, 51∕2–63∕4 DN–423 M722 13∕4, 17∕8, 21∕8, 21∕4, 27∕16, 35∕8, 41∕2, 43∕4, 61∕8, 61∕4, 61∕2, 63∕4 Halliburton TB16 M713 61∕2, 81∕2, 121∕4, 121∕2 TB26 M713 33∕4, 37∕8, 57∕8, 6, 61∕8, 61∕4, 61∕2, 727∕32, 83∕8, 81∕2, 823∕32, 97∕8, 121∕4, 123∕16 TB583 M713 61∕8 TB593 M713 6, 61∕8, 63∕4, 81∕2 TBT17 M634 57∕8, 81∕2

H1209D

HAMM

H1411D H1509

HAMM HAMM

H1512

HAMM

60–2,000 60–2,000 60–2,000 60–2,000

GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW

6, 61/4, 63∕8, 61/2 81/2, 83/4 81/2, 83/4 87∕8, 91/2, 95∕8, 93/4, 97∕8, 121/4, 123∕8 77∕8, 83∕8, 81/2, 83/4, 87∕8, 11 12, 121/4, 123∕8 85∕8, 105∕8, 11, 121/4, 123∕8 83/4, 87∕8, 123∕8

40–20 40–20 40–20 40–20

AWP AP AWP AP

50–500 50–500

AFG FMUl FMUl FMUm FMUl FMUm F F F F F F F F F

RC347

347

Smith Bits GFI28 527X GFI28B 527X GFI28D 527X GFSI28 527X XRI28 527X F27IY 527Y TIX–TSK MH 231 MH 231 MH 231

50–500

AGKM

50–140

GMRUh

600–3,500

60–600

ADGHIMR

600–3,500 600–3,500 600–3,500

60–600 60–600 60–600

Custom Custom ADGHMNR

300–3,000 300–3,000

80–1,000 MN 80–1,000 MN

300–3,000 300–3,000 300–3,000

80–1,000 MN 80–1,000 MN 80–1,000 IMN

400–650

40–20

AP

S

2,900–7,300 105–55

S

81/2 121/4 81/2 81/2 61∕8 77∕8, 83/4

2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–7,000

BGHMX BGHMWX BGHMWX BGHMX HMX Y

231

MH

231

MH MH–TX MH–TX MH–TZ MH–X MH–X

231 237 237 235 236 236

MH–XZ MH–XZ MH–Z Tri–Max TM223 TM231 Varel DT4

234 234 234 223 231

6–121/4 6–121/4

L2 G G

AWP AWP AP

3,200–7,600 120–60

MH

DT4G

60–150 60–150

40–20 40–20 40–20

6.125, 6.75, 8.5, 8.75, 9.5 8.5, 9, 10.625, 12.25

3 ∕8, 4, 4 ∕8, 41/2 45∕8, 43/4, 5, 51∕8 55∕8, 57∕8, 6, 61∕8, 61/4, 63/4, 71/2, 75∕8, 77∕8 83∕8, 81/2, 85∕8, 83/4, 95∕8, 105∕8, 11, 115∕8, 12, 121/4 133∕8, 143/4, 15, 151/2, 16, 171/2, 20 20, 22, 23, 24, 26 57∕8, 6 81/2, 121/4 81/2, 121/4 55∕8, 57∕8, 6, 61∕8, 75∕8 83∕8, 81/2, 85∕8, 83/4, 95∕8, 105∕8, 11, 115∕8, 12, 121/4 81/2, 121/4 16, 171/2 81/2, 121/4

G

AGIKM AGMR

300–700 300–700 300–600

Steel tooth roller cone bits Baker Hughes RC321 321

100–400 BGDHNOUXR

250–500 250–500 250–500 300–700

Medium–Hard

100–400 BGDHNOUXR

Bit–Tech 300–2,000 60–120 CP–440 M342 77∕8, 81∕2, 83∕4 Dowdco Coring CP613LI M132 61∕8×25∕8, 61/2×31/2, 300–3,000 50–150 63/4×31/2, 727∕32×4, 8.719×4 CP68LI M142 61∕8×25∕8, 63/4×31/2 300–3,000 50–150 CP813LI M232 727∕32×31/2, 81/2×4 600–3,500 50–150 MCP580 M142 6×29∕16, 61∕8×29∕16, 300–3,000 50–150 61/4×29∕16, 63/4×29∕16 MCP582 M232 81/2×4, 823∕32×4 300–3,000 50–150 Halliburton 1 CD93 M233 6–12 ∕4 250–3,500 50–150 FC3643 M343 81∕2–121∕4 250–3,500 50–150 FC3647 M343 81∕2–121∕4 250–3,500 50–150 3 1 FC3743 M432 5 ∕8–12 ∕4 250–3,500 50–150 1 FC3747 M432 8 ∕2 250–2,000 50–150 1 1 FC3843 M433 6 ∕2–12 ∕4 250–3,500 50–150 FC3843A S433 81∕2 250–2,500 50–150 FC3844 M433 83∕8 250–2,500 50–150 1 7 1 1 FC3847 M433 6 ∕8, 7 ∕8, 8 ∕2, 12 ∕4 250–2,500 50–150 Varel C713 57∕8, 6, 61∕8, 83∕8, 81/2 1,000–3,000 50–400 Surface set diamond coring bits Bit–Tech CG–300F M623 6, 61∕8, 61∕4, 77∕8, 83∕4 400–2,500 CN–333G M713 61∕8, 63∕16, 61∕4, 400–2,500 77∕8, 83∕4 1 1 7 3 CN–403 M712 6, 6 ∕8, 6 ∕4, 7 ∕8, 8 ∕4 400–2,500 Dowdco Coring CN–201 M–811 41/2×17∕8, 51/2×21∕8, 300–3,500 61∕8×21∕8, 6×25∕8, 61∕8×25∕8, 61/2×25∕8, 61∕8×31/2, 61/2×31/2, 63/4×31/2, 727∕32×31/2, 727∕32×4, 81/2×4, 83/4×4 Varel CN300 M713 81/2 100–1,500 CN320 M723 55∕8, 6, 61/2, 85∕16, 100–1,500 87∕16, 81/2, 815∕32 Surface set diamond bits

Smith Bits H1006D HAMM H1206 HAMM H1206D HAMM H1209 HAMM

400–4,000 55∕8, 57∕8 6 400–4,000 3 8 ∕8, 81/2, 121/4 400–4,000 81/2 400–4,000 Hammer bits

1

1,500–2,500 60–40 1,500–3,000 60–40 2,000–4,500 100–60

S S S

2,500–5,500 100–60

S

2,500–4,500 100–60

S

2,500–4,000 2,000–4,500 2,500–5,500 2,500–5,500 2,000–4,500 2,500–5,500

S S S S S S

100–60 90–50 90–50 80–50 90–50 90–50

2,500–5,500 250–50 2,500–4,000 150–50 2,500–5,500 80–50

637 637 637 637 637 637

83∕8 77∕8 83/4, 87∕8 57∕8, 6, 61/2, 71/2 6, 83∕8, 81/2 43/4, 51/4, 55∕8, 57∕8, 6, 61∕8, 61/4, 61/2, 63/4 61∕8 47∕8, 5, 61∕8 6, 81/2, 83/4 41∕8 55∕8, 53/4, 61∕8 83/4

GMW W S

2,000–5,000 60–120 2,000–5,000 60–120

216S 33/4, 37∕8, 41∕8, 41/2, 2,000–5,000 300–50 45∕8, 43/4, 57∕8, 6, 115∕8, 12 2,000–5,000 300–50 217S 57∕8, 6, 61∕8, 71/2, 81/4, 83∕8, 81/2, 105∕8, 115∕8, 12, 121/4 211S 31/2, 35∕8, 33/4, 37∕8, 3,000–6,000 85–35 41∕8, 41/4, 41/2, 45∕8, 43/4, 47∕8, 5, 51∕8, 51/4, 53∕8, 51/2, 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4, 61/2, 65∕8, 63/4, 77∕8, 81/4, 83∕8, 81/2, 26 Insert roller cone bits

Baker Hughes GX–55 637 GX–55R 637 GX–55RG 637 MX–50 637 MX–55 637 STX–50 637 STX–50R VG–50 VG–55 VG–55M VGD–50 VGD–50RG

7

280–50 280–50 280–50 280–50 300–50 220–50

MW CMW S

3,200–7,600 3,200–7,600 3,200–7,600 2,600–6,800 2,900–7,400 2,000–5,300

120–60 120–60 120–60 195–80 150–75 175–80

Y X GY BMY BMY MY

2,000–5,300 2,000–5,300 3,200–7,600 2,000–5,300 2,000–5,300 3,200–7,600

175–80 175–80 120–60 175–80 175–80 120–60

MX BGWY BGWY BGWY BGMWY BGMWY

VM–55 637 VM–55G 637 VMD–55 637 VMG–55 637 VM–68G 645 GX–66 647 GX–68 647 MX–66 647 STX–66 647 VG–66 647 VG–68 647 VG–68G 647 VGD–66 647 VM–66 647 VMD–66G 647 VMD–68 647 VMG–68 647 Halliburton EBXT42S 615 EQ42DS 615 EQ44S 615 EQH40D2R 617 EQH40R 617 EQH41R 617 EQH42 617 EQH42D2R 617 EQH617 42D2RC EQH42D3R 617 EQH42DR 617 EQH617 42DRD EQH42R 617 EQH43D2R 617 EQH617 43D3RD EQH43R 617 EQH44D2R 617 EQH44D3R 617 EQH44DR 617 EQH44R 617 EQH45 617 EQH45DR 617 EQH45R 617 EQH45RA 617 EQHD617 40D2R EQHD40R 617 EQHD617 42D2R EQHD617 42D3RD EQHD42DR 617 EQHD42R 617 EQHD617 44D2R EQHDD- 617 42DRD 617 QD42R QH41DR 617 QH41DRA 617 QH42R 617 QH43R 617 QH44 617 QH44D2S 617 QH44D3R 617 QH44DR 617 QH44R 617 QH45 617 QH45A 617 QH45D2 617 QHD42R 617 QHD43R 617 QHD44DR 617 QHN47R 617 EBXT47R 617 XT47D2S 622 XT47D2SL 625 EQ46S 625 EQH47 625 EQH47D2R 627 EQH627 47D2RD EQH47D3R 627 EQH627 47D3RD EQH47DR 627 EQH627 47DRD EQH47R 627

150–75 150–75 150–75 150–75 75–40 105–55 105–55 130–65 160–80 160–80 160–80 105–55 160–80 100–50 100–50 100–50 100–50

BGMWY BGMWY BGMWY BGMWY BGMWY Y Y BMY MY BGWY BGWY BGMWY BGMWY BGMWY BGMWY BGMWY BGMWY

181/2 181/2 16 81/2 45∕8 61∕8–123∕8 61∕8–123∕8 87∕8 81/2

4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500

35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140

GMXWC GMXWC GMXWC GMXWC GMXW GMXWC GMXWC GMYWC GMXWC

57∕8–121/4 121/4 121/4

4,000–7,500 35–140 4,000–7,500 35–140 4,000–7,500 35–140

GMXWC GMXWC GMXWC

61∕8–81/2 57∕8 6–121/4

4,000–7,500 35–140 4,000–7,500 35–140 4,000–7,500 35–140

GMXWC GMXW GMXWC

121/4 61∕8–81/2 61∕8 61∕8–83/4 77∕8–83/4 97∕8 97∕8 83/4 83/4 83/4

4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500

35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140

GMYWC GMYWC GMYW GMXWC GMXWC GMXWC GMXWC GMYWC GMYWC GMYWC

83/4 83∕8

4,000–7,500 35–140 4,000–7,500 35–140

GMYWC GMXWC

Special features/ usage

Recommended rotary speed, rpm

IADC code

QDMI4209 QDMI4213

7

Smith Bits KH613 KH713 KH813 M433 KHI613

Recommended WOB, lb/in. diameter

60–400

2,900–7,400 2,900–7,400 2,900–7,400 2,900–7,400 2,000–5,100 3,200–7,600 3,200–7,600 2,600–6,800 2,000–5,300 2,000–5,300 2,000–5,300 3,200–7,600 2,000–5,300 2,900–7,400 2,900–7,400 2,900–7,400 2,900–7,400

Size range, in.

60–400

200–3,500

6, 81/2, 121/4 6, 81/2 57∕8, 6, 81/2, 121/4 81/2 143/4 83∕8 97∕8 6 61∕8, 61/2 61∕8 41/2, 81/2, 121/4 121/4 61∕8 83∕8, 81/2 83∕8 81/2 81/2

IADC code

200–3,500

91/2

300–3,000 80–1,000 IMN M622 57∕8–121∕4 M624 41∕8–121∕4 300–3,000 80–1,000 IMN M724 31∕2, 33∕4 300–3,000 80–1,000 IMN Impregnated diamond bits

Manufacturer, Bit name/model number

97∕8

QDM7413

Special features/ usage

QDM7313

Recommended rotary speed, rpm

60–400

Recommended WOB, lb/in. diameter

500–4,000

Size range, in.

61/2

TT521 TT561 TT593

IADC code

QDM7309

GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

Manufacturer, Bit name/model number

Recommended rotary speed, rpm 60–400

Special features/ usage

Recommended WOB, lb/in. diameter 200–3,500

Size range, in. 7

Manufacturer, Bit name/model number QDM4213

105∕8

4,000–7,500 35–140

GMXWC

6 6–121/4 81/2–121/4

4,000–7,500 35–140 4,000–7,500 35–140 4,000–7,500 35–140

GMXW GMXWC GMXWC

61∕8–121/4

4,000–7,500 35–140

GMXWC

61∕8 6–81/2 61/2 121/4 121/4 6–12 61/4 77∕8 73∕8 63/4 63/4–77∕8 63/4–77∕8 77∕8–83/4 77∕8 83/4 61/2 105∕8 83/4 121/4 171/2 181∕8 171/2 45∕8 77∕8–83/4

4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500

35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140

GMXW GMXWC GMXW GMYWC GMYWC GMXWC GMYW GMXW GMXW GMXW GMXW GMXW GMYWC GMXW GMYWC GMXW GMYWC GMXWC GMYWC GMYWC GMYWC GMYWC GMXW GMYWC

81/2 61/2

4,000–7,500 35–140 4,000–7,500 35–140

GMYWC GMYW

83/4 51/2–81/2

4,000–7,500 35–140 4,000–7,500 35–140

GMYWC GMYWC

83/4

4,000–7,500 35–140

GMYWC

World Oil® / JANUARY 2017 D-29

171/2 171/2

4,000–7,500 35–140 4,000–7,500 35–140

GMYWC GMYWC

647

HAS637GY 637 HF637H 637

28

4,000–7,500 35–140

GMYWC

57∕8 57∕8 77∕8

4,000–7,500 35–140 4,000–7,500 35–140 4,000–7,500 35–140

GMYW GMYW GMYW

61∕8–121/4 83/4

4,000–7,500 35–140 4,000–7,500 35–140

GMYWC GMYWC

121/4

4,000–7,500 35–140

GMYWC

5 ∕8–81/2 51/2

4,000–7,500 35–140 4,000–7,500 35–140

GMYWC GMYW

61∕8–97∕8

4,000–7,500 35–140

GMYWC

83/4–87∕8 57∕8–81/2

4,000–7,500 35–140 4,000–7,500 35–140

GMYWC GMYWC

61∕8–121/4

4,000–7,500 35–140

GMYWC

55∕8

4,000–7,500 35–140

GMYW

51/2–6

4,000–7,500 35–140

GMYW

57∕8

4,000–7,500 35–140

GMYW

5 ∕8

4,000–7,500 35–140

GMYW

7

7

6–121/4

4,000–7,500 35–140

GMYWC

83∕8–81/2 6 43/4 77∕8 6 7 3/8 6 6–77∕8 6 57∕8–77∕8 105∕8 105∕8 61∕8 61∕8 77∕8

4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500

35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140

GMYWC GMYW GMXW GMYW GMYW GMYW GMYW GMYW GMYW GMYW GMYWC GMYWC GMYW GMYW GMYW

121/4 81/2–121/4 81/2

4,000–7,500 35–140 4,000–7,500 35–140 4,000–7,500 35–140

GMYWC GMYWC GMYWC

97∕8

4,000–7,500 35–140

GMYWC

43∕4, 47∕8, 51∕2, 57∕8, 6, 61∕8, 61∕2, 77∕8, 83∕8, 81∕2, 83∕4, 97∕8, 121∕4 6 6, 77∕8, 81∕2, 83∕4, 91∕2, 97∕8, 105∕8, 121∕4 6, 77∕8, 81∕2, 83∕4, 91∕2, 97∕8, 105∕8, 121∕4 61∕8, 81∕2, 83∕4 6, 61∕8, 61∕2, 81∕2, 83∕4, 91∕2, 105∕8, 121∕4

3,500–7,000 70–40

CGLY

3,500–7,000 70–40 3,500–7,000 70–40

G GLY

3,500–7,000 70–40

GLY

3,500–7,000 70–40 2,000–6,000 200–40

GLY GLY

D-30 2017 Drill Bit Classifier

GLY GY GLY

45∕8, 6, 61∕8, 61∕2, 65∕8, 77∕8, 83∕8, 81∕2, 83∕4, 121∕4 77∕8, 81∕2, 83∕4 6, 81∕2, 83∕4

3,000–7,000 220–40

HDY

3,000–7,000 MD637HX 637 MD647 647 3,000–7,000 ReedHycalog Bits JA63 637 87∕8 3,500–6,000 R50 637 33/4, 37∕8, 57∕8, 6, 63/4, 3,500–6,000 7 3 7 ∕8, 8 ∕8, 81/2, 83/4, 97∕8, 105∕8, 121/4 R50A 637 83/4 3,500–6,000 3,500–6,000 R60 647 77∕8, 121/4 R65 647 83/4 3,500–6,000 RH50 637 61∕8, 81/2, 85∕8 3,500–6,000 RH60 647 61∕8, 81/2 3,500–6,000 S63 635, 171/2, 26 3,500–6,000 637 T63 635 26 3,500–6,000 Rubicon G63SH 635 171/2 3,000–6,000 P63SH 635 171/2 3,000–6,000 P64FH 637 81/2, 83/4, 121/4 3,000–6,000 Smith Bits F50YA 637Y 87∕8 3,000–7,000 F57UY 637Y 81/2 3,000–7,000 F57Y 637Y 81/2, 121/4 3,000–7,000 F59HY 647Y 77∕8 3,000–7,000 F59Y 647Y 83/4 3,000–7,000 F67 647Y 121/4 3,000–7,000 F67Y 647Y 77∕8, 81/2, 83/4, 97∕8 3,000–7,000 FHI50Y 637Y 81/2 3,000–7,000 FHKI50Y 637Y 81/2 3,000–7,000 FHKI69UY 647Y 81/2 3,000–7,000 GF50WYB 637Y 85∕8 3,000–7,000 GF50YB 637Y 81/2 3,000–7,000 GF57 637Y 121/4 3,000–7,000 GF57Y 637Y 121/4 3,000–7,000 GF65YB 647Y 81/2 3,000–7,000 GFI50Y 637Y 83∕8, 81/2 3,000–7,000 GFI55B 637Y 121/4 3,000–7,000 GFI67Y 647Y 121/4 3,000–7,000 GFK65YBD 637Y 81/2 3,000–7,000 SB637 637Y 81/2 3,000–6,000 SB637D 637Y 81/2 3,000–6,000 SB637DD 637Y 81/2 3,000–6,000 XR50Y 637Y 43/4, 55∕8, 6, 61∕8, 61/4, 2,000–6,000 61/2, 63/4 XR50YD 637Y 6 2,000–6,000 XR60Y 647Y 61∕8 2,000–6,000 XR68Y 647Y 61∕8 2,000–6,000 XRI50Y 637Y 57∕8 2,000–6,000 XRI63Y 647Y 61∕8 2,000–6,000 1 XRI65Y 647Y 6 ∕8 2,000–6,000 1 XRI65YD 647Y 6 ∕8 2,000–6,000 XRK65Y 647Y 6 2,000–6,000 TIX–TSK A60 632Y 97∕8, 121/4 3,000–5,500 A60 632Y 15 2,500–5,000 5 7 1 X60G 637Y 5 ∕8, 5 ∕8, 6, 6 ∕8 3,000–5,000 X60G 637Y 81/2, 121/4 3,000–6,000 M60GFSP 637Y 81/2, 121/4 3,000–6,000 Tri–Max TM622 622 6–121/4 3,000–5,000 TM625 625 6–171/2 3,000–5,000 TM627 627 6–121/4 3,000–5,000 Varel CM54 637x 61∕8, 61∕2, 63∕4 2,500–7,000 CM55 637Y 51∕2, 55∕8, 6, 61∕8, 2,500–7,000 61∕2, 63∕4 CM57 637Y 61∕8 2,500–7,000 CM67 637Y 61∕8 2,500–7,000 1 5 HE55 637Y 8 ∕2, 11 ∕8 2,500–7,000 7 HE57 637Y 7 ∕8 2,500–7,000 HE67 647Y 83∕8, 81∕2, 83∕4, 121∕4 2,500–7,000 PDC drill bits Baker Hughes AT407FX M333 AT507FX M323 HC306 M243 HC406 M233 HC407 M333 HC408 M433 HC506 M223

83/4 83/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28

500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500

220–40 220–40

DHxY

120–40 120–40

AY CGMWY

120–40 120–40 120–40 120–40 120–40 120–40

GMWX CGMWY GMWY GMWY GMWY CY

120–40

CGMWY

45–85 50–120 50–120

SG CGW GW

160–50 160–50 160–50 110–50 110–50 110–50 110–50 160–50 160–50 110–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 280–50 160–50 160–50 160–50 270–40

Y Y Y Y Y Y Y Y BWY BWY BGHMWY BGHMWY BGHMY BGHMY BGHMWY BGHMY BGHMWY BGHMWY BGHMWY Y GWY GWY HMY

270–40 270–40 270–40 270–40 270–40 270–40 270–40 270–40

GHMWY HMY HMY HMY HMY HMY GHMWY BHMY

60–40 60–40 60–40 60–40 200–40

AY AY GY GY GMY

60–100 60–100 60–100 275–50 275–50

MW MW

275–50 275–50 300–50 300–50 300–50

MW MW CMW CMW CMW

60–400 60–400 350–50 350–50 350–50 350–50 350–50

DRstGVW DRstGVW DGVW DGVW DGVW DGVW DGVW

M323 M423 M223 M323 M323 M233 M333 M433 M423 M223 M323 M323 M323 M223 M323 M443 M233 M333 M333 M233 M233 M333 M333 M333 M333 M333 M223 M323 M323 M323 M323 M323 M323 M323 M223 M223 M323 M323 M323 M233 M233 M333 M333 M333 M233 M232 M333 M333 M333 M333 M333 M323 M323 M323 M323 M323 M323 M323 M223 M223 M323 M323 M323 M323 M323 M233 M333 M233 M333 M333 M323 M323 M323 M223 M323 M323 M333 M333 M233 M233 S233 M333 M323 M333 M333 S332 M333

31∕8–28 31∕8–28 31∕8–28 121/4 31∕8–28 31∕8–28 31∕8–28 81/2, 121/4 16 31∕8–28 81/2 171/2 81/2 31∕8–28 81/2, 121/4, 141/2 81/2 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 57∕8 6 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 81/2 81/2, 121/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 6 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 121/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 121/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 6 57∕8 31∕8–28 31∕8–28 31∕8–28 57∕8, 6 57∕8 83/4 121/4 55∕8 6

235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 500–2,500 500–2,500 500–2,500 235–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500

350–50 350–50 350–50 60–400 350–50 350–50 350–50 60–400 60–400 350–50 60–400 60–400 60–400 350–50 60–400 60–400 350–50 350–50 350–50 350–50 350–50 350–50 60–400 60–400 350–50 350–50 350–50 350–50 350–50 350–50 60–400 60–400 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 350–50 350–50 350–50 350–50 350–50 350–50 60–400 350–50 350–50 350–50 350–50 350–50 350–50 60–400 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 60–400 350–50 350–50 350–50 60–400 60–400 60–400 60–400 60–400 60–400

Special features/ usage

GMYWC

2,500–6,000 200–40 2,500–6,000 200–40 2,500–6,000 200–40

HC507 HC508 HC606 HC607 HC608 HCD406 HCD407 HCD408 HCD408Z HCD506 HCD507 HCD507X HCD507Z HCD606 HCD607 Q208FX Q306F Q307F Q308F Q406 Q406F Q407 Q407F Q407FX Q408 Q408F Q506 Q506F Q507 Q507F Q507FHX Q507FX Q508 Q508F Q606 Q606F Q607 Q607F Q608F QD306 QD306F QD307F QD308 QD308F QD406 QD406F QD407 QD407F QD407FX QD408 QD408F QD506 QD506F QD507 QD507F QD507X QD508 QD508F QD606 QD606F QD607 QD607F QD607X QD608 QD608F QT306 QT308 QT406 QT407 QT408 QT506 QT507 QT508 QT606 QT607 QT608 T307 T308 T406 T406F T406S T407 T407F T407FX T407FX T407S T407X

Recommended rotary speed, rpm

4,000–7,500 35–140

GLY

Size range, in.

141/4

2,000–6,000 200–40

IADC code

GMYWC GMYWC GMYWC GMXWC GMYWC GMYWC GMYWC GMYW GMYWC GMYWC GMYWC GMXW GMXW GMYWC

77∕8, 81∕2, 83∕4, 91∕2, 97∕8, 105∕8, 121∕4 81∕2, 91∕2, 121∕4 81∕2 81∕2

Manufacturer, Bit name/model number

35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140 35–140

Special features/ usage

4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500

637

Recommended rotary speed, rpm

85∕8 81/2 83/4 81/2 77∕8–81/2 77∕8–121/4 121/4 73∕8 121/4 77∕8–121/4 121/4 61∕8 61∕8 141/4

637 637 637

Recommended WOB, lb/in. diameter

GMYWC GMYWC GMYWC

HF647HM 647 HJ637 HJ637GH HJS637GLY MD637

Size range, in.

4,000–7,500 35–140 4,000–7,500 35–140 4,000–7,500 35–140

IADC code

121/4–123∕8 121/4–123∕8 121/4

Manufacturer, Bit name/model number

Recommended rotary speed, rpm

GMYW GMYWC GMXWC GMYW

Special features/ usage

Recommended WOB, lb/in. diameter

35–140 35–140 35–140 35–140

Size range, in.

4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500

Recommended WOB, lb/in. diameter

HA637GH 637 HA647 647 HA647H

57∕8 83∕8–115∕8 81/2 61∕8

IADC code

Manufacturer, Bit name/model number

EQH48R 627 EQH50D2R 627 EQH51D2R 627 EQH627 51DRA EQH51R 627 EQHA47R 627 EQHD627 47D2R EQHD47R 627 EQHD48DR 627 QH47 627 QH47D2R 627 QH47D2RC 627 QH47D2S 627 QH47DR 627 QH47R 627 QH47RC 627 QH50D2R 627 QH50D3R 627 XTD47R 627 XTD47RP 627 EBXT627 55D3RD EBXTD- 627 55D3RD XTD55R 635 EQH635 52DRD EQH635 52DRD EQH55 637 EQH55D2R 637 EQH637 55D2RA EQH55D3R 637 EQH637 55D3RD EQH637 55D3RD EQH55DR 637 EQH637 55DRA EQH637 55DRD EQH55R 637 EQH637 57D2RD EQH637 57D3RD EQH637 57DRD EQH637 57DRD EQHD637 55D3RD EQHD637 55DRD EQHDD- 637 55DRD Q48 637 QH55 637 QH55D2R 637 QH55D2S 637 QH55D3R 637 QH55DR 637 QH55DRD 637 QH55R 637 QHD55R 637 QHD57RP 637 EQH67DR 637 EQH67R 637 EQH69 647 EQH69D3R 647 EQH647 69D3RD EQH69DR 647 EQH69R 647 EQHD647 69D3RD SR69R 647 Kingdream HA637 637

DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW

T606 T606F T606S T606FS T607F T607FS T607FSX T607FX T607S T607SX T607X TD207 TD307FX TD307X TD406 TD406F TD406S TD406FS TD407 TD407F TD407FSX TD407FX TD407X

M423 M233 S223 S233 M233 M323 S223 S223 M323 S323 S323 M323 M343 M333 M333 M233 S233 S233 M233 M333 M333 S233 M333

TD408 TD408F TD408X TD506 TD506F TD506S TD506FS TD507 TD507F TD507FS

M333 M333 M333 M333 M323 S323 S323 M223 M223 M333

TD507FX S223 TD507S

M323

DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW

500–2,500

60–400

DGVW

500–2,500 500–2,500 500–2,500

60–400 60–400 60–400

DGVW DGVW DGVW

500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 500–2,500 500–2,500

60–400 350–50 350–50 350–50 350–50 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 60–400 350–50 350–50 350–50 350–50 60–400 350–50 60–400 60–400

DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW

500–2,500 500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500

60–400 60–400 60–400 60–400 350–50 350–50 350–50 350–50 60–400 60–400

DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW

500–2,500

60–400

DGMVW

500–2,500

60–400

DGMVW

500–2,500

60–400

DGMVW

500–2,500 500–2,500 500–2,500 500–2,500 500–2,500

60–400 60–400 60–400 60–400 60–400

DGMVW DGMVW DGMVW DGMVW DGMVW

235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500 500–2,500

350–50 350–50 350–50 60–400 60–400 60–400 60–400 60–400 60–400

DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW

M242 61∕8, 61∕4, 77∕8, 400–3,000 81∕2, 83∕4 1 1 7 1 3 B46 M242 6 ∕8, 6 ∕4, 7 ∕8, 8 ∕28 ∕4 400–3,000 DP–440– M242 77∕8, 81∕2, 83∕4 200–3,000 B2U HP–440–B M342 31∕2, 35∕8, 33∕4, 37∕8, 4, 200–3,000 41∕8, 41∕4, 43∕8, 41∕2, 45∕8, 43∕4, 57∕8, 6, 61∕8, 61∕4, 61∕2, 63∕4 HP–440– M232 6, 61∕8, 61∕4, 61∕2, 63∕4 200–3,000 B13 DB Bits D613X M433 6, 61∕8, 61/2, 63/4, 77∕8, 250–3,500 81/2, 83/4 D616X M423 77∕8, 81/2, 83/4, 97∕8, 250–3,500 121/4

60–600

ADGMVW

60–600 60–600

ADGMVW ADGMVW

200– 1,000

ADFGHMNVW

60–600

ADGHMVW

60–350

DGHMVW

60–350

DGHMVW

TD507X

S223

TD508F TD508FS TD508FX TD508S TD606

M333 S223 M323 S223 M323

TD606F TD606S TD606FS TD607 TD607F TD607FX TD607FXX TD607X TD608 Bit–Tech B45

M223 S223 S223 M323 M323 M323 M323 M323 M423

M433 77∕8, 81/2, 83/4, 97∕8 M422 77∕8, 81/2, 83/4, 97∕8, 11, 121/4 D811 M443 6, 61∕8, 61/2, 63/4 D813 M433 77∕8, 81/2, 83/4, 97∕8, 121/4 D813X M433 77∕8, 81/2, 83/4, 97∕8, 11, 121/4 D816 M423 97∕8, 11, 121/4 D913 M433 77∕8, 81/2, 83/4 D916X M423 77∕8, 81/2, 83/4, 97∕8 Drill Master, Inc. M513 M232 63∕4 M513 M233 61∕2, 83∕8, 81∕2 M513 M233 77∕8 M513SB M332 83∕4 D713X D716X

250–3,500 250–3,500

60–350 60–350

DGHMVW DGHMVW

250–3,500 250–3,500

60–350 60–350

DGHMVW DGHMVW

250–3,500

60–350

DGHMVW

250–3,500 250–3,500 250–3,500

60–350 60–350 60–350

DGHMVW DGHMVW DGHMVW

200–2,500 200–2,500 200–2,500 200–3,000

60–350 60–350 60–400 60–350

M613 M613 M613 M613 M613+SB

M232 M233 M332 M333 M432

61∕8 121∕4 61∕2, 63∕4 83∕8, 81∕2, 97∕8 83∕4

200–3,000 200–2,500 200–2,500 200–2,500 200–3,000

60–350 60–400 60–350 60–400 60–350

M619 M619 M690 M690 M690 M690 M713

M323 M323 M343 M342 M342 M343 M333

121∕4 171∕2 41∕8 43∕4 57∕8 77∕8 77∕8, 83∕8, 81∕2, 83∕4, 97∕8, 121∕4 61∕8, 61∕2 91∕2 97∕8 171∕2 57∕8 61∕8, 61∕4, 61∕2, 63∕4 171∕2

200–2,500 200–2,500 200–3,000 200–3,000 200–3,000 200–2,500 200–2,500

60–400 60–400 60–350 60–350 60–350 60–350 60–400

GHMIRSTUm GHMIRSTUm GHMIRSTUm DHMWINRRSThV GHMIUm GHMIRSTUm GHMIRSTUm GHMIRSTUm DHMWINRRSThV GHMIRSTUm GHMIUh GHMIUl GHMIRSTUm GHMIRSTUh GHMIRSTUh GHMIRSTUm

200–2,500 200–2,500 200–3,000 200–2,500 200–3,000 200–2,500 200–2,500

60–350 60–400 60–350 60–400 60–350 60–350 60–350

GHMIRSTUm GHMIUh GHMIRSTUm GHMIUh GHMIRSTUm GHMIRSTm GHMIUh

81/2 83/4 61/2 81/2 83/4 6 81/2 6 81/2 171/2 61∕8 81/2 81/2 81/2 81/2 61∕8–81/2 61∕8 81/2 91/2 61/2 77∕8 83/4 121/4 85∕8–83/4 121/4 81/2 12 83/4 83/4 91/4

500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500

40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

83/4 81/2 81/2 81/2 83/4

250–3,500 250–3,500 250–3,500 250–3,500 250–3,500

50–150 50–150 50–150 50–150 50–150

MVWRst MVWRst MVWRst MVWRst MVWRst

81/2 81/2 83/4 81/2 81/2 97∕8 81/2 83∕8 81/2 121/4 77∕8 77∕8 12

250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500

50–150 50–150 50–150 50–150 50–150 50–150 50–150 40–250 40–250 40–250 40–250 40–250 40–250

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

M713 M432 M713 M433 M713+ M432 M716 M423 M790 M443 M790 M443 M819 M423 Halliburton GTD65 M422 MM46R M422 MM55 M422 MM56H M422 MM65RM M422 MMD55DH M422 MMD75DC M422 MMG55H M422 MMG65H M422 MMG86DH M422 GT55 M423 GT65DM M423 GTE65DC M423 GTE66 M423 MM25 M423 MM45D M423 MM55R M423 MM56DM M423 MM56R M423 MM65C M423 MM65DR M423 MM66DC M423 MM75DMH M423 MM75MR M423 MM76DC M423 MM86 M423 MM86DH M423 MMD55D M423 MMD66DC M423 MMDM423 75DRH MMD76D M423 MME25 M423 MME55DC M423 MME55DH M423 MMEM423 65DRM MME65H M423 MME74DI M423 MME75D M423 MME75RH M423 MME86 M423 MMG65DM M423 MMG74DI M423 GT55D M424 GTE65D M424 MM26i M424 MM45DM M424 MM65DI M424 MM95DI M424

MM95H MME26 MME55D MME96 MMG55D GT05 MM05 MM26D MME05 MME95 FC274 FC3043 FCi204 GT44 GT64DH GTD64D M74 MM44H MM74DM MMD64M MMD74DM MMD84DC MME84 MME84DH MMG64D CD260AW FC3043i FC3445A FC3643i FC3833 FC3844 FC3845 FC3943i FCi284Li FCi294Li GT74DMH GT84DH GT84I GTE64DC GTE74DH M74D M84D MM44 MM44D MM54DM MM64C MM64DC MM64I MM74DH MM74DMH MM84DM MM94R MM94RH MMD64DC MMD64DH MMD64DM MMD64DMH MMD64R MMD74 MMD74C MMD74M MMD84C MMD84DM MMD84DMH MME54D MME64C MME64D MME64DC MME64H MME74D MME74DH MMG54D MMG54M MMG64DH MMG74D MMG74DM MMG84D FC3037 FC3635A FC3636 FC3645A FC3745 FC3747 FC3937 GT64D GT64DC

500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 250–2,000 250–2,000 250–2,000 250–2,000 250–2,000 250–2,000 250–2,000 250–2,000 250–2,000 250–2,000 250–2,000 250–2,000 250–2,000 250–2,000 250–2,000 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500

40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst F F F MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst F F F F F F F F F F MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

M433 M433 M433 M433 M433 M433 M433

6 6 63/4 83/4 61/4–83/4 81/2 81/2

250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500

50–150 50–150 50–150 50–150 50–150 50–150 50–150

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M434 M434 M434 M434 M434 M434 M434 M434 M434

61∕8 63/4 63/4 63/4 61∕8 63/4–83/4 83/4 61∕8 83/4 57∕8 81/2 85∕8 81/2 81/2 41/2 43/4 51/2 57∕8–61/2 53/4–81/2 83∕8–81/2 57∕8–6 81/2

250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500

50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst F F F F F F F MVWRst MVWRst

Special features/ usage

12 121/4 91/2 121/4 91/2 81/2 81/2 121/4 81/2 81/2 53∕8 83∕8 83∕8 61∕8 83∕8 6 61/2 61/2 97∕8 63/4 77∕8 81/2–83/4 61∕8 83∕8 61∕8–91/2 6 81/2 61∕8 81/2 81/2 83∕8 57∕8–61∕8 81/2 83∕8–81/2 81/2 83∕8 81/2 83∕8 61∕8 105∕8 81/2 81/2 61∕8 43/4–47∕8 61/4 61/4 83/4–97∕8 121/4 55∕8–105∕8 83∕8 97∕8 6 6 61∕8 57∕8–81/2 61/2–77∕8 63/4

Size range, in.

M424 M424 M424 M424 M424 M425 M425 M425 M425 M425 M432 M432 M432 M432 M432 M432 M432 M432 M432 M432 M432 M432 M432 M432 M432 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433 M433

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm 60–400 60–400 60–400 350–50 350–50 350–50 350–50 60–400 60–400 60–400

Recommended rotary speed, rpm

M323 M333 M323 M323

500–2,500 500–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500

Recommended WOB, lb/in. diameter

T508 T508F T508FX T508X

81/2 81/2 81/2 31∕8–28 31∕8–28 31∕8–28 31∕8–28 61/4, 83/4, 91/2 161/2 77∕8, 83∕8, 83/4, 97∕8, 121/4 81/2, 83/4, 91/2, 97∕8, 121/4 57∕8 121/4 81/2, 85∕8, 83/4, 97∕8, 121/4 81/2, 83/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 83/4 121/4 121/4 83/4, 121/4, 16 171/2 171/2 83/4, 121/4, 16 55∕8 61∕8 6, 61∕8 31∕8–28 31∕8–28 31∕8–28 31∕8–28 57∕8 31∕8–28 83∕8 6, 61∕8, 81/2, 83/4, 121/4 6, 63/4, 83∕8, 81/2, 83/4 77∕8 77∕8 81/2, 83/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 121/4, 16 6, 121/4, 141/2, 143/4, 171/2 81/2, 105∕8, 121/4, 141/2, 143/4, 17, 181∕8 81/2, 83/4, 105∕8, 121/4, 16 81/2, 97∕8, 105∕8, 143/4, 181∕8 81/2 81/2 81/2, 85∕8, 121/4, 143/4 105∕8 81/2, 83/4, 105∕8, 121/4, 16 31∕8–28 31∕8–28 31∕8–28 121/4 121/4, 16, 171/2 83/4, 121/4 17 121/4, 16 181/2

Recommended WOB, lb/in. diameter

IADC code M333 M333 M333 M233 M233 S233 M323 M323 S323 M323

Size range, in.

Manufacturer, Bit name/model number T408F T408FX T408X T506 T506F T506S T507F T507FS T507FX T507X

World Oil® / JANUARY 2017 D-31

PL713

M333 83/4

PLd613 M233 43/4, 61∕8 PLd613 M333 77∕8, 81/2, 83/4 PLs613 M233 6, 61∕8 PLs613 M433 77∕8, 81/2, 83/4 PLs711 M343 63/4 PLs711 M443 61∕8 PLs713 M423 77∕8 PLs713 M433 83/4 PLs716 M323 83/4 PLt513 M432 61∕8 PLt513 M433 63/4 PLt613 M233 6, 61∕8 PLt613 M333 6, 61∕8, 61/4, 63/4, 77∕8 PLt613 M433 77∕8, 81/2, 83/4 PLt713 M333 61∕8 PLt716 M323 77∕8 PLt716 M423 77∕8, 81/2, 83/4 PLt813 M423 121/4 FD509 M143 35∕8, 33/4 FD509 M243 37∕8, 41∕8 FD609 M243 41/2, 45∕8 FD609 M343 43/4 PLd716 M323 83/4 ReedHycalog Bits DS811 M432, 77∕8, 81/2 M433 DS813 M422, 6, 61∕8, 61/4, 61/2, 63/4, M424, 77∕8, 83∕8, 81/2, 83/4, M432, 121/4, 143/4 M433, M442, S432

500–4,500

350–50

500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500

350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50

1,000–6,000 Variable

GHMWUmV

1,000–6,000 Variable

GHMWUmV

D-32 2017 Drill Bit Classifier

M442 31/2, 35∕8, 33/4, 37∕8, 41∕8, 41/2, 45∕8, 43/4 M442 41∕8

60–400

500–4,500

60–400

500–5,000

60–400

500–5,000

60–400

500–5,000

60–400

MCR509

35∕8

MD611

63/4

500–4,500

60–400

MDI511

6, 61∕8, 63/4

500–4,500

60–400

MDI611

6, 61∕8, 65∕8, 81/2, 83/4 500–4,500

MDI711

M333 6, 61∕8, 63/4, 83/4

60–400

500–4,500

60–400

500–4,500

60–400

MDI811

61/2

MDSI509

5 ∕8, 6 ∕8

500–5,000

60–400

MDSI611

83/4

500–4,500

60–400

MDSI711

6, 61/4, 81/2, 83/4

500–4,500

60–400

MDSI811

61/2

500–4,500

60–400

MDSIZ811

61/2

500–4,500

60–400

MI609

41∕8, 41/4

500–5,000

60–400

500–4,500

60–400

500–5,000

60–400

500–4,500

60–400

500–4,000

60–400

MI711

7

M333 6 41∕8

MI909 MSI711 R35Y

1

M433 55∕8, 53/4, 57∕8, 6, 61∕8, 61/4 57∕8, 83∕8

R509

61∕8

500–5,000

60–400

S909

41∕8, 41/2, 45∕8

500–5,000

60–400

SDI511

61/4, 63/4

500–4,500

60–400

SDI611 SDI711

6, 61/4, 63/4, 7 ∕8, 81/2, 500–4,500 83/4, 97∕8 500–4,500 6, 61∕8, 61/4, 63/4

60–400

SDIZ611

83/4

60–400

Tri–Max HZ–90H Q–1H SM–1H Ulterra U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U516M U516M CF U516M U516M CF U516M U516M CF

7

500–4,500

60–400

GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW

S977 41/2–81/2 S546 81/2–121/4 S877 41/2–121/4

1,000–3,500 80–200 1,000–3,500 80–120 1,000–3,500 80–120

HMD MDG DG

M232 M232 M233 M233 M234 M234 M332 M332 M333 M333 M334 M334 M432 M432 M433 M433 M434 M434 M222 M222 M223 M223 M224 M224

500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000

BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

Special features/ usage

350–50

1

GHMWUmVRst

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2

Recommended rotary speed, rpm

500–4,500

1,000–6,000 Variable 1,000–6,000 Variable

Size range, in.

M433 77∕8

GHMWUmV

M322 M322 M323 M323 M324 M324 M422 M422 M423 M423 M424 M424 M222 M222 M223 M223 M224 M224 M322 M322 M323 M323 M324 M324 M422 M422 M423 M423 M424 M424 M342 M342 M343 M343 M344 M344 M442 M442 M443 M443 M444 M444 M232 M232 M233 M233 M234 M234 M332 M332 M333 M333 M334 M334 M432 M432 M433 M433 M434 M434 M222 M222 M223 M223 M224 M224 M322 M322 M323 M323 M324 M324 M422 M422 M423 M423 M424 M424 M222 M222 M223 M223 M224 M224 M322 M322 M323

Recommended WOB, lb/in. diameter

PL613

DGHMWUmV DGHMWUmV DGHMWUmV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIOUh GHMWIOUh GHMWIOUh GHMWIOUh GHMWIRstV

M909

1,000–6,000 Variable

U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U516M U516M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U519M U519M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U616M U616M CF U619M U619M CF U619M U619M CF U619M U619M CF U619M U619M CF U619M

IADC code

350–50

M609

GHMWUmV

500–5,000

6 ∕8

M20

1,000–6,000 Variable

Manufacturer, Bit name/model number

500–4,500

37∕8

Special features/ usage

61∕8

Smith Bits M09

M422, 83∕8, 81/2, 83/4, 12 M423, M432 M211, 6, 61∕8, 61/4 M242, M243, M422 M343 6 M422, 81/2, 121/4, 141/2, S223, 143/4, 16, 171/2, S422, 181∕8 S433

Recommended rotary speed, rpm

SGADTR SGADTR SGADTR

SK908 TK69

Recommended WOB, lb/in. diameter

60–300 60–300 60–300

DS908

Size range, in.

857–2,685 857–2,685 857–2,685

DS816

IADC code

81∕2–171∕2 57∕8–171∕2 81∕2–171∕2

Manufacturer, Bit name/model number

Recommended rotary speed, rpm

MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst MVWRst

Special features/ usage

Recommended WOB, lb/in. diameter

50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 50–150 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250 40–250

Size range, in.

200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 200–1,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500 500–3,500

IADC code

Manufacturer, Bit name/model number

85∕8 61∕8 83∕8 61/2 61∕8 57∕8 81/2 83/4 57∕8 61∕8 61/2 83/4 57∕8 61/4 121/4 57∕8 41∕8 35∕8 43/4–47∕8 57∕8 35∕8 61∕8 57∕8 61/2 61∕8 61/2 57∕8–61∕8 6 81/2 91/2 81/2 91/2 81/2 121/4 121/4 16 16 16 16 81/2 55∕8–61∕8 6–61/2 61/2–63/4 6

GT64DM M434 GT64R M434 GT94D M434 GTE54D M434 MM64DI M434 MM74iH M434 MM84I M434 MMD54DC M434 MMD54DH M434 MMD64DI M434 MMD74R M434 MME54DC M434 MMG54DH M434 MMD34DC M435 MMD84DM M435 M83 M442 MM62 M442 MMD53DH M442 MMD53M M442 MMD73D M442 MM53 M443 MM63D M443 MM73D M443 MM73D M443 MM73M M443 MMG73D M443 FC3827 M444 MM93 M444 SFD56H S422 SF65RH S423 SFE46D S423 SFG65R S423 FC3657A S424 GT65DCs S424 SF65DCH S424 SF76CH S424 SFD76C S424 SFE76CH S424 SFG76CH S424 FC3447A S434 FC3745A S434 FC3845A S434 SF73 S442 FC3827A S444 Kingdream KM1382 M433 KM1392 M434 KM1682 M423 PDC Logic PL613 M233

500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU

500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000

BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU

U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U616S U616S CF U616S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U619S U619S CF U619S FB U709S U709S CF U709S FB U709S U709S CF U709S FB

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

S232 S232 S232 S233 S233 S233 S234 S234 S234 S332 S332 S332 S333 S333 S333 S334 S334 S334 S432 S432 S432 S433 S433 S433 S434 S434 S434 S222 S222 S222 S223 S223 S223 S224 S224 S224 S322 S322 S322 S323 S323 S323 S324 S324 S324 S422 S422 S422 S423 S423 S423 S424 S424 S424 S222 S222 S222 S223 S223 S223 S224 S224 S224 S322 S322 S322 S323 S323 S323 S324 S324 S324 S422 S422 S422 S423 S423 S423 S424 S424 S424 S342 S342 S342 S343 S343 S343

23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Special features/ usage

23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Recommended rotary speed, rpm

S333 S333 S333 S334 S334 S334 S432 S432 S432 S433 S433 S433 S434 S434 S434 S222 S222 S222 S223 S223 S223 S224 S224 S224 S322 S322 S322 S323 S323 S323 S324 S324 S324 S422 S422 S422 S423 S423 S423 S424 S424 S424 S222 S222 S222 S223 S223 S223 S224 S224 S224 S322 S322 S322 S323 S323 S323 S324 S324 S324 S422 S422 S422 S423 S423 S423 S424 S424 S424 S342 S342 S342 S343 S343 S343 S344 S344 S344 S442 S442 S442 S443 S443 S443 S444 S444 S444

Recommended WOB, lb/in. diameter

U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U516S U516S CF U516S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U519S U519S CF U519S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB

Recommended WOB, lb/in. diameter

BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU

Size range, in.

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

IADC code

Special features/ usage

500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000

Manufacturer, Bit name/model number

Recommended rotary speed, rpm

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Recommended WOB, lb/in. diameter

M323 M324 M324 M422 M422 M423 M423 M424 M424 M342 M342 M343 M343 M344 M344 M442 M442 M443 M443 M444 M444 M232 M232 M233 M233 M234 M234 M332 M332 M333 M333 M334 M334 M432 M432 M433 M433 M434 M434 M222 M222 M223 M223 M224 M224 M322 M322 M323 M323 M324 M324 M422 M422 M423 M423 M424 M424 M222 M222 M223 M223 M224 M224 M322 M322 M323 M323 M324 M324 M422 M422 M423 M423 M424 M424 S232 S232 S232 S233 S233 S233 S234 S234 S234 S332 S332 S332

Size range, in.

IADC code

Manufacturer, Bit name/model number U619M CF U619M U619M CF U619M U619M CF U619M U619M CF U619M U619M CF U709M U709M CF U709M U709M CF U709M U709M CF U709M U709M CF U709M U709M CF U709M U709M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U716M U716M CF U716M U716M CF U716M U716M CF U716M U716M CF U716M U716M CF U716M U716M CF U716M U716M CF U716M U716M CF U716M U716M CF U719M U719M CF U719M U719M CF U719M U719M CF U719M U719M CF U719M U719M CF U719M U719M CF U719M U719M CF U719M U719M CF U719M U719M CF U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB

500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU

World Oil® / JANUARY 2017 D-33

D-34 2017 Drill Bit Classifier

U719S U719S CF U719S FB U719S U719S CF U719S FB Varel R713

R813

R716

R816

S423 S423 S423 S424 S424 S424

500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000

BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU

M433 55∕8, 53/4, 57∕8, 6, 61∕8, 1,000–3,500 50–400 61/4, 65∕8, 77∕8, 83∕8, 81/2, 85∕8, 91/2, 97∕8, 105∕8, 115∕8, 121/4 M433 55∕8, 57∕8, 6, 61∕8, 61/2, 1,000–3,500 50–400 63/4, 71/2, 73/4, 83∕8, 81/2, 83/4, 91/2, 97∕8, 105∕8, 115∕8, 121/4 M423 77∕8, 83∕8, 81/2, 85∕8, 1,000–3,500 50–400 83/4, 91/2, 97∕8, 103∕8, 105∕8, 11, 115∕8, 12, 121/4, 131∕8, 143/4, 16, 171/2 M423 77∕8, 83∕8, 81/2, 91/2, 1,000–3,500 50–400 97∕8, 12, 121/4, 16, 17, 171/2 PDC Reaming/Enlarge While Drilling

BGTPDG1G2G3LHNOUXR

43∕8×6, 6×71/4, 81/2×97∕8, 105∕8×123/4, 121/4×143/4, 143/4×171/2, 171/2×23 Bi–center PDC drill bits

Drill Master, Inc. MBC7– M434 143∕4×121∕4 131113 ReedHycalog Bits CSD6411 81/2×91/2 CSD6413 105∕8×121/4, 121/4×141/4 PSD6413 141/2×171/2 PSD6613 105∕8×115∕8, 121/4×13, 121/4×131/2 SRR7113 S433 12×143/4 Smith Bits QDM4209 3

200–1,700

BGTPDG1G2G3LHNOUXR BGTPDG1G2G3LHNOUXR BGTPDG1G2G3LHNOUXR

Underream while drilling

60–400

RSTMWUh

3,000–24,500 80–200 3,000–35,000 80–200

GHMWUm GHMWUm

3,000–37,500 80–200 Size 80–200 Dependent

GHMWUm GHMWUm

3,000–3,500 80–200

GHMWUh

500–4,000

60–400

GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW

QDM7309

61/2

500–4,000

60–400

QDMI4209

3, 47∕8

500–4,000

60–400

QDS3209

5 ∕8

500–4,000

60–400

QDS4209

7

500–4,000

60–400

500–2,500

100–400 BGDHNOUXR 100–400 BGDHNOUXR

Varel VH609 VH709

5

M243 37∕8x41/2, 43∕8x51/4, 41/2x53/4, 43/4x55∕8 M242 41∕8x47∕8, 81/2x9

500–2,500

PDC coring bits Bit–Tech CP–440BU M232 CP–440BU M342 CP–440P M342 CP–B66 M232 Halliburton FC3043 M433 FC3743/ M432 FC3743i FC3843 M433 FC3843i M343 FC3844/ M343 FC3844i FC3847/ M344 FC3847i FC3923 M433 FC3933 M433 FC3943/ M433 FC3943i ReedHycalog Bits CEP913 S232, S432, S433, CVP913 S232 IEP913 Varel C809 M442 C713 M332 C813

77∕8, 81∕2, 83∕4 6, 61∕8 77∕8, 81∕2, 83∕4 61∕8

300–2,000 300–2,000 300–2,000 300–2,000

50–500 50–500 60–120 50–500

AFGMVW AFGMVW AFG AFGMVW

81∕2–121∕4 53∕8–121∕4

250–3,500 250–3,500

50–150 50–150

F F

61∕2–121∕4 81∕2–121∕4 81∕2–121∕4

250–3,500 250–3,500 250–3,500

50–150 50–150 50–150

F F F

81∕2–121∕4

250–3,500

50–150

F

8 ∕2 81∕2 81∕2

250–3,500 250–3,500 250–3,500

50–150 50–150 50–150

F F F

 77∕8,  81∕2,  81∕2,  8 3 ∕4,  83∕4

300–2,000

50–150

GUl

 6  3

300–2,000 300–2,000

1

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

50–400 50–400 50–400 50–400 50–400 50–400

Tri–Max EWD DTS

23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU

Size range, in.

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

IADC code

500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000

Manufacturer, Bit name/model number

Special features/ usage

23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Recommended rotary speed, rpm

S344 S344 S344 S442 S442 S442 S443 S443 S443 S444 S444 S444 S232 S232 S232 S233 S233 S233 S234 S234 S234 S332 S332 S332 S333 S333 S333 S334 S334 S334 S432 S432 S432 S433 S433 S433 S434 S434 S434 S222 S222 S222 S223 S223 S223 S224 S224 S224 S322 S322 S322 S323 S323 S323 S324 S324 S324 S422 S422 S422 S423 S423 S423 S424 S424 S424 S222 S222 S222 S223 S223 S223 S224 S224 S224 S322 S322 S322 S323 S323 S323 S324 S324 S324 S422 S422 S422

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number U709S U709S CF U709S FB U709S U709S CF U709S FB U709S U709S CF U709S FB U709S U709S CF U709S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U716S U716S CF U716S FB U719S U719S CF U719S FB U719S U719S CF U719S FB U719S U719S CF U719S FB U719S U719S CF U719S FB U719S U719S CF U719S FB U719S U719S CF U719S FB U719S U719S CF U719S FB

Surface set diamond coring bits Bit–Tech CG–300PG M623 CN–334G M813 CN–404G M612 CN–404RS M812 CN–424BL M842 Halliburton CT103 M623 CT303HS M623 CT313SB M623 CT403 M624 CT93 M623 Varel CN500

6, 61∕8, 61∕4, 77∕8, 83∕4 61∕8, 63∕16, 61∕4, 77∕8, 83∕4 6, 61∕8, 61∕4, 77∕8, 83∕4 61∕8, 77∕8, 81∕2, 83∕4 61∕8, 63∕4

400–2,500 400–2,500 400–2,500 400–2,500 400–2,500

50–500 50–500 50–500 50–500 50–500

AGIKM AGRM AGKM AGKM AGMR

6–121∕4 6–121∕4 6–121∕4 6–121∕4 6–121∕4

250–3,500 250–3,500 250–3,500 250–3,500 250–3,500

110–150 110–150 110–150 110–150 110–150

I I IW I I

53/4, 6, 63/4, 815∕32, 81/2 500–1,500 Surface set diamond bits

Bit–Tech DG–420PG M622 13∕4, 17∕8, 21∕8, 21∕4, 300–3,500 27∕16, 35∕8, 41∕2, 43∕4, 61∕8, 61∕4, 61∕2, 63∕4 Variable DN–304G M813 41∕2–43∕4, 51∕2–61∕2 DN–334G M813 41∕2–43∕4, 51∕2–63∕4 Variable 3 7 1 1 DN–424G M812 1 ∕4, 1 ∕8, 2 ∕8, 2 ∕4, 300–3,500 27∕16, 35∕8, 41∕2, 43∕4, 61∕8, 61∕4, 61∕2, 63∕4 Halliburton TT521 M622 33∕4–121∕4 300–3,000 TT561 M624 41∕8–121∕4 300–3,000 Varel 1 5 VN300 M714 2 ∕5, 21/4, 21/2,2 ∕8, 400–2,500 31∕8, 31/4, 33∕8, 35∕8, 34∕5, 4, 41/4, 41/2, 43/4, 6, 61∕8 Impregnated diamond bits Smith Bits K503 M842 41∕8, 57∕8, 6, 61/4, 83∕8, 400–4,000 81/2, 105∕8, 121/4 K505 M842 57∕8, 6, 61∕8, 63/4, 400–4,000 81/2, 161/2 1 3 K507 M842 6, 6 ∕8, 8 ∕8, 81/2, 91/2, 400–4,000 105∕8, 121/4 K515 61∕8, 63/4 400–4,000 K517 83∕8 400–4,000 K527 83∕8 400–4,000 K605 61∕8, 63/4 400–4,000 K607 81/2, 121/4 400–4,000 K703 M842 41/2, 45∕8, 6, 81/2 400–4,000 1 5 K705 M842 6 ∕8, 61/2, 6 ∕8, 81/2, 400–4,000 91/2, 121/4, 127∕8, 131∕8, 17 400–4,000 K715 81/2 K953 61∕8 400–4,000 KC507 6 400–4,000 KCR507 81/2 400–4,000 KGR50 57∕8, 83∕8 400–4,000 KH509 35∕8 400–4,000 KH613 55∕8, 57∕8 400–4,000 KH713 6 400–4,000 3 KH813 M433 8 ∕8, 81/2, 121/4 400–4,000 KHI613 81/2 400–4,000 KHI813 81/2, 105∕8 400–4,000 KHR716 57∕8 400–4,000 KZ505 6, 61∕8 400–4,000 KZ507 81/2 400–4,000 KZ607 81/2 400–4,000 Hammer bits Smith Bits H1006D HAMM H1206 HAMM H1206D HAMM H1209 HAMM H1209D HAMM H1411 H1411MD H1509 H1512

HAMM HAMM HAMM HAMM

63/4 81/2, 83/4 83/4 83∕8, 81/2, 87∕8, 11 83∕8, 81/2, 85∕8, 83/4, 87∕8 12, 121/4, 123∕8, 127∕8 121/4, 123∕8 121/4, 123∕8 87∕8, 127∕8

50–1,000 G

60–600

ADGHIMR

Variable Variable 60–600

Custom Custom ADGHMNR

80–1,000 IMN 80–1,000 IMN 50–1,000 G

60–2,000 GHMNUhVW 60–2,000 GHMNUhVW 60–2,000 GHMNUhVW 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000

GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW

60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000

GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW

250–500 250–500 250–500 300–700 300–700

40–20 40–20 40–20 40–20 40–20

AWP AP AWP AP AWP

300–600 300–600 300–600 400–650

40–20 40–20 40–20 40–20

AP AP AP AP

Hard

Steel tooth roller cone bits 50–150 50–150

6, 81/2 1,000–2,000 50–150 57∕8, 6, 61∕8, 85∕16, 83∕8, 1,000–2,000 50–150 87∕16, 81/2 M332 85∕16, 87∕16, 81/2 1,000–2,000 50–150

GUl GUl

TIX–TSK H H

321 321

G G

H

321

G

37∕8, 4, 41∕8, 41/2, 43/4 1,500–3,000 60–40 55∕8, 57∕8, 6, 61∕8, 61/4, 2,500–5,000 80–40 63/4, 71/2, 75∕8, 77∕8 83∕8, 81/2, 85∕8, 83/4, 3,000–6,000 80–40 95∕8, 97∕8, 105∕8, 11, 12, 121/4

S S S

HS–TX HS–TX HS–TXZ HS–TZ HS–TZ HS–X HS–X HS–XZ HS–Z H–X H–X H–XZ H–Z Tri–Max TM315 TM316 TM317 Varel DT6 L1 LH1

317 317 315 315 315 316 316 314 314 326 326 324 324 315 316 317

6–97∕8 6–97∕8 6–97∕8

737

43/4, 6 61∕8, 61/2 41∕8 61∕8 53/4, 57∕8 81/2

S S S S S

3,000–5,000 80–40

S

3,000–5,000 3,000–6,000 3,000–6,000 3,000–6,000 3,000–5,000 3,000–5,000 3,000–6,000 3,000–6,000 3,000–6,000 3,000–5,000 3,000–6,000 3,000–6,000 3,000–6,000

S S GM S S S S GM S S S GM S

2,000–5,000 60–100 2,000–5,000 60–100 2,000–5,000 60–100

70–40 70–40 180–40 70–40 70–40 70–40 70–40 180–40 70–40 70–40 70–40 180–40 70–40

2,000–5,300 2,000–5,300 2,000–5,300 2,000–5,300 2,600–6,400 2,600–7,100

150–75 150–75 150–75 145–75 120–60 90–45

MW S S

MY GMY BGMWY MY BGMWY MY

81/2

4,000–7,500 35–140

GMYWC

57∕8–6 6 57∕8

4,000–7,500 35–140 4,000–7,500 35–140 4,000–7,500 35–140

GMYW GMYW GMYW

61∕8 171/2

4,000–7,500 35–140 4,000–7,500 35–140

GMYW GMYWC

171/2

4,000–7,500 35–140

GMYWC

121/4 121/4 81/2–121/4

4,000–7,500 30–120 4,000–7,500 30–120 4,000–7,500 30–120

GMYWC GMYWC GMYWC

121/4 121/4

4,000–7,500 30–120 4,000–7,500 30–120

GMYWC GMYWC

81/2 61∕8 61∕8–81/2 121/4

4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500

30–120 30–120 30–120 30–120

GMYWC GMYW GMYWC GMYWC

121/4

4,000–7,500 30–120

GMYWC

43∕4, 61∕8, 61∕2, 77∕8, 4,000–7,000 70–40 81∕2, 83∕4, 97∕8, 121∕4 43∕4, 61∕8, 61∕2, 77∕8, 3,000–7,000 200–40 81∕2, 83∕4, 97∕8, 121∕4 3,000–7,000 200–40 81∕2

HJ737GHL 737 ReedHycalog Bits R70 737 61∕8, 77∕8, 83∕8, 81/2, 83/4 R75 737 121/4 Rubicon G73FH 737 6, 8½, 97∕8, 12¼ P73FH 737 6, 8½, 97∕8, 12¼ Smith Bits FH70Y 737Y 81/2, 85∕8 FHI70UY 737Y 81/2 FHI70Y 737Y 81/2 FHKI70UY 737Y 81/2 XRK70Y 737Y 6 TIX–TSK X65G 727Y 81∕2, 121∕4 X70G 737Y 55∕8, 57∕8, 75∕8 X70G 737Y 81∕2, 121∕4

GLY GLY GHLY

3,500–6,500 100–40

GMWY

3,500–6,500 80–40

GMWY

3,000–6,000 50–110 3,000–6,000 50–110

GW GW

3,000–7,000 3,000–7,000 3,000–7,000 3,000–7,000 2,000–6,000

110–50 110–50 110–50 110–50 270–40

3,000–6,000 60–40 3,000–5,000 60–40 3,000–6,000 60–40

Y Y Y Y BHMY GY GY GY

Tri–Max TM632 TM635 TM637 TM732 TM737

632 635 637 732 737

Baker Hughes HC307 M323 HC407 M333 HC408 M433 HC409 M433 HC507 M323 HC508 M423 HC607 M323 HC608 M323 HC609 M423 HCD407 M333 HCD408 M433 HCD507 M323 HCD607 M323 Q207 M343 Q207F M343 Q307F M333 Q308F M333 Q407 M333 Q407F M333 Q408 M333 Q408F M333 Q409 M433 Q507 M323 Q507F M323 Q508 M323 Q508F M323 Q509 M423 Q509F M423 Q607 M323 Q607F M323 Q608F M323 Q609 M423 Q609F M423 QD207 M343 QD207F M343 QD307 M333 QD307F M333 QD308 M333 QD308F M333 QD407 M333 QD407F M333 QD408 M333 QD408F M333 QD507 M323 QD507F M323 QD508 M323 QD508F M323 QD509 M423 QD509F M423 QD509S S423 QD607 M323 QD607F M323 QD608 M323 QD608F M323 QD609F M423 QT207 M343 QT307 M333 QT308 M333 QT407 M333 QT408 M333 QT507 M323 QT508 M323 QT509 M423 QT607 M323 QT608 M323 T407 M333 T407F M333 T507 M323 T507F M323 T607 M323 T607F M323 T609FS S423 TD407 M333 TD407F M333 TD507 M323 TD507F M323 TD509 M433 TD509FX M423 TD509X M423

6–121/4 6–121/4 6–121/4 41/2–121/4 41/2–121/4

31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 16, 171/2 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 24, 28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 143/4 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 16 31∕8–28 31∕8–28 31∕8–28 31∕8–28 121/4 16 16

2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 2,000–5,000 PDC drill bits 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 235–2,500 235–2,500 235–2,500 235–2,500 500–2,500 500–2,500 500–2,500

60–100 60–100 60–100 60–100 60–100

350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 350–50 350–50 350–50 350–50 60–400 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 60–400 350–50 350–50 350–50 350–50 60–400 60–400 60–400

DGVW DGVW DGVW DGMVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGVW DGVW DGVW DGMVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGMVW DGMVW DGVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW

TD607 TD607F TD609 TD609FS TD609S TD609X Bit–Tech DP440B2UP HP440B13P HP–440BP

M323 M323 M423 S423 S423 M423

31∕8–28 31∕8–28 143/4 22 22 16

M242 77∕8, 81∕2, 83∕4 M232 6, 61∕8, 61∕4, 61∕2, 63∕4 M342 31∕2, 35∕8, 33∕4, 37∕8, 4, 41∕8, 41∕4, 4, 43∕8, 41∕2, 45∕8, 43∕4, 57∕8, 6, 61∕8, 61∕4, 61∕2, 63∕4 Drill Master, Inc. M813 M433 171∕2 M813 M333 121∕4 M813 M433 81∕4, 83∕8, 81∕2 M813 M433 97∕8 M813 M433 171∕2 M890 M443 61∕8 M890 M443 61∕2 M913 M433 81∕2 M913 M433 121∕4 M990 M443 77∕8, 83∕8, 81∕2, 91∕2 M990 M443 97∕8, 121∕4 PDC Logic PLd813 M433 83/4 PLs809 M343 41/2, 45∕8 PLs809 M443 61∕8 PLt713 M423 81/2 PLt813 M423 83/4 PLt813 M433 83/4 PLt816 M423 97∕8 ReedHycalog Bits DS1011 M432 77∕8 DS1013 M432 81/2, 105∕8, 121/4 SK1013 M432 181/2 SK1016

M432 143/4

DS608

S244, S344 M322, S432 M422, M424 M432 M432

SK911 SK916 DS913 TK73 TK76

TK83 TK99 Smith Bits M09

350–50 350–50 60–400 60–400 60–400 60–400

DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW

400–3,000 200–3,000 200–3,000

60–300 60–300 60–300

ADGMVW ADGHMVW ADFGHMNVW

235–2,500 500–2,000 500–3,000 500–2,000 235–2,500 400–2,000 400–2,000 500–3,000 500–2,000 500–3,000 500–2,000

50–350 100–400 100–400 100–400 50–350 60–900 60–900 100–400 100–400 100–400 100–400

GHMIUh GHMIRSTUh GHMIRSTUh GHMIRSTUh GHMIUh GHMIRSTUh GHMIRSTUh GHMIRSTUh GHMIRSTUh GHMIRSTUh GHMIRSTUh

500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500 500–4,500

350–50 350–50 350–50 350–50 350–50 350–50 350–50

GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV GHMWIRstV

1,000–6,000 Variable 1,000–6,000 Variable 1,000–6,000 Variable 1,000–6,000 Variable

1

3 ∕8, 4 ∕8, 41/2

1,000–6,000 Variable

53/4, 61∕8, 61/4

1,000–6,000 Variable

5

105∕8, 121/4

1,000–6,000 Variable

81/2 57∕8

1,000–6,000 Variable 1,000–6,000 Variable

M422, 81/2, 83/4, 97∕8, 121/4, M423, 143/4, 161/2, 171/2 M424, M432, S422, S423 M332, 83/4, 121/4 M422 M422, 81/2, 115∕8 M432 M422 171/2

TK79

235–2,500 235–2,500 500–2,500 500–2,500 500–2,500 500–2,500

37∕8

1,000–6,000 Variable

1,000–6,000 Variable 1,000–6,000 Variable 1,000–6,000 Variable 500–5,000

60–400

500–5,000

60–400

M909

M442 31/2, 35∕8, 33/4, 37∕8, 41∕8, 41/2, 45∕8, 43/4 M442 41∕8

500–5,000

60–400

MCR509

M442 3 ∕8

500–5,000

60–400

M609

5

MDSI509 M442 57∕8, 61∕8

500–5,000

60–400

MI609

41∕8, 41/4

500–5,000

60–400

MI909

41∕8

500–5,000

60–400

R509

61∕8

500–5,000

60–400

S909

4 ∕8, 41/2, 4 ∕8

500–5,000

60–400

MA813

6

500–4,000

60–400

MASI513 M233 77∕8, 81/2, 83/4

500–4,000

60–400

MASI613 M233 83/4

500–4,000

60–400

MASIZ513 M233 83/4

500–4,000

60–400

M233 35∕8

500–5,000

60–400

MD611

63/4

500–4,500

60–400

MD713

81/2, 121/4

500–4,000

60–400

MCR509

1

5

Special features/ usage

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm 70–40 70–40 70–40 80–40 80–40

236S 41∕2, 45∕8, 43∕4, 47∕8 2,000–5,000 300–50 311S 37∕8, 43∕4, 61∕8 3,500–6,500 75–35 7 15 7 321S 2 ∕8, 2 ∕16, 3 ∕8, 4, 3,500–7,000 65–35 41∕2, 45∕8, 43∕4, 47∕8 Insert roller cone bits

Baker Hughes STX–70 737 STX–70G 737 VGD–70 737 STX–88 817 VM–80 817 VMD–80 817 Halliburton EQH717 71D3RD EQH73D3R 717 EQH73DR 717 EQH717 73DRD QH73R 717 EBXT735 79D3RD EBXTD- 735 79D3RD EQH79D2R 737 EQH79D3R 737 EQH737 79D3RD EQH79R 737 EQHD737 79D3RD QH79D2R 737 QH79DR 737 QH79R 737 EQH747 89D3RD EQH89R 747 Kingdream HA737G 737 HF737

3,000–6,000 3,000–6,000 3,000–6,000 2,500–5,000 3,000–6,000

S

Recommended rotary speed, rpm

311

341 346 344 311 311

3,000–5,000 80–40

Recommended WOB, lb/in. diameter

HS

133∕8, 143/4, 15, 151/2, 16, 171/2, 20, 22, 24 81/2, 121/4 81/2, 121/4 81/2, 121/4 6, 61∕8, 71/2, 75∕8, 77∕8 83∕8, 81/2, 85∕8, 83/4, 95∕8, 97∕8, 105∕8, 11, 12, 121/4 143/4, 15, 151/2, 16, 171/2, 20, 22, 24 57∕8, 6 81/2, 121/4 81/2, 121/4 81/2, 121/4 16, 171/2 57∕8, 6, 61∕8 81/2, 121/4 81/2, 121/4 81/2, 121/4 57∕8, 6, 61∕8 81/2, 121/4 81/2, 121/4 81/2, 121/4

HR HR–X HR–Z HS HS

321

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number H

GHMWUhV GHMWUhV GHMWUhVRst GHMWUhVRst

GHMWUmVRst GHMWUmVRst

GHMWUmVRst GHMWUmVRst GHMWUmVRst GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUhVW GHMNRstUmVW

World Oil® / JANUARY 2017 D-35

60–400

M333 51/4, 51/2, 55∕8, 57∕8, 500–4,000 6, 61∕8, 63/4, 7, 81/2, 85∕8, 83/4, 9, 91/2, 97∕8, 115∕8, 121/4 500–4,500 M333 61∕8, 61/2, 63/4

60–400

M333 57∕8, 6, 81/2, 91/2, 121/4, 143/4 61/2

500–4,000

60–400

500–4,500

60–400

M333 55∕8, 81/2, 91/2, 115∕8, 500–4,000 121/4, 131/2, 141/2, 143/4, 16, 161/2 500–4,000 MDIR613 61∕8

60–400 60–400

MDIZ413

6

500–4,000

60–400

MDIZ513

61∕8

500–4,000

60–400

MDIZ613

6, 83/4

500–4,000

60–400

MDIZ713

81/2

500–4,000

60–400

MDSI413

61∕8, 63/4, 77∕8

500–4,000

60–400

MDSI509

57∕8, 6

500–5,000

60–400

MDSI513

6, 63/4, 81/2, 83/4

MDI613

MDI711 MDI713 MDI811 MDI813

60–400

500–4,000

60–400

MDSI613 M333 57∕8, 6, 61∕8, 63/4, 77∕8, 500–4,000 81/2, 83/4, 121/4 MDSI711 81/2 500–4,500

60–400

53/4, 57∕8, 6, 77∕8, 81/2, 500–4,000 85∕8, 83/4, 87∕8 61/2 500–4,500

60–400

MDSI813 M333 83∕8, 81/2, 83/4, 105∕8, 500–4,000 121/4 MDSI913 81/2, 83/4 500–4,000

60–400

MDSIR613

83/4

500–4,000

60–400

MDSIR713

61∕8, 63/4, 81/2

500–4,000

60–400

MDSIR813

81/2

500–4,000

60–400

MDSIZ513

81/2

500–4,000

60–400

MDSIZ613

57∕8, 6, 77∕8

500–4,000

60–400

MDSIZ713

7

5 ∕8, 81/2

500–4,000

60–400

MDSIZ811

61/2

500–4,500

60–400

MDSIZ813

121/4

500–4,000

60–400

MDSXI613

81/2

500–4,000

60–400

MDSXI713

81/2

500–4,000

60–400

MDSXI813

81/2

500–4,000

60–400

MDSXIZ713 MDX613

81/2

500–4,000

60–400

61∕8

500–4,000

60–400

MDXI713

81/2

500–4,000

60–400

MDZI713

5

10 ∕8

500–4,000

60–400

MDZXI713

81/2

500–4,000

60–400

MDZXIZ713

81/2

500–4,000

60–400

MI413

61/2

500–4,000

60–400

MI513

M223 61∕8, 61/4, 61/2, 77∕8, 83/4 41∕8

500–4,000

60–400

500–5,000

60–400 60–400

MI711

M233 6, 61∕8, 61/4, 61/2, 65∕8, 500–4,000 63/4, 77∕8, 83/4 M333 6 500–4,500

MI813

M333 63/4, 121/4, 16, 171/2 500–4,000

60–400

MDSI713 MDSI811

MI609 MI613

D-36 2017 Drill Bit Classifier

60–400

60–400

60–400

60–400

GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW

MIZ613

M433 77∕8, 83∕8, 81/2, 85∕8, 87∕8, 115∕8, 121/4 77∕8

60–400 60–400

500–4,000

60–400

MR613

57∕8

500–4,000

60–400

MS413

61∕8

500–4,000

60–400

MS613

121/4

500–4,000

60–400

MS713

121/4

500–4,000

60–400

MSI413

6, 63/4

500–4,000

60–400

500–4,000

60–400

500–4,000

60–400

500–4,500

60–400

500–4,000

60–400

MSI513

M333 6 ∕8, 61/4, 61/2, 83/4 1

M433 6, 61∕8, 61/4, 61/2, 65∕8, 63/4, 77∕8, 81/2, 83/4, 121/4 MSI711 M433 53∕8, 55∕8, 57∕8, 6, 61∕8, 61/4 MSI713 M433 6, 61∕8, 61/2, 63/4, 77∕8, 81/2, 83/4, 97∕8, 121/4 MSI813 M433 61∕8, 61/2, 81/2, 83/4, 97∕8, 121/4 MSIR513 61∕8

MSI613

500–4,000

60–400

500–4,000

60–400

MSIR613

61∕8, 61/4

500–4,000

60–400

MSIR713

1

6 ∕8

500–4,000

60–400

MSIZ413

63/4

500–4,000

60–400

MSIZ513

61∕8, 61/4

500–4,000

60–400

MSIZ613

61∕8, 63/4, 77∕8

500–4,000

60–400

MSIZ713

81/2

500–4,000

60–400

MSIZ813

81/2

500–4,000

60–400

MST913

57∕8

500–4,000

60–400

MSXI613

81/2

500–4,000

60–400

MSXIZ616

81/2

500–4,000

60–400

MSZ713

57∕8

500–4,000

60–400

MZ713

57∕8

500–4,000

60–400

MZI813

81/2

500–4,000

60–400

MZR813

83∕8

500–4,000

60–400

R35Y

57∕8, 83∕8

500–4,000

60–400

R613

83/4

500–4,000

60–400

R813

83/4

500–4,000

60–400

S413

33/4

500–4,000

60–400

SDAI513

81/2

500–4,000

60–400

SDI313

81/2, 83/4

500–4,000

60–400

SDI413

63/4, 77∕8, 81/2, 83/4

500–4,000

60–400

SDI511

63/4

500–4,500

60–400

SDI513

60–400

SDI613

6, 61∕8, 61/4, 61/2, 63/4, 500–4,000 77∕8, 81/2, 83/4, 87∕8 6, 61/4, 61/2, 63/4, 77∕8, 500–4,500 81/2, 83/4, 97∕8 81/2, 83/4, 171/2 500–4,000

SDI711

6, 61/4, 61/2, 63/4

500–4,500

60–400

SDIZ513

61∕8, 81/2

500–4,000

60–400

SDIZ611

83/4

500–4,500

60–400

SDSI713

81/2

500–4,000

60–400

SDXIZ513

81/2

500–4,000

60–400

SI913

16

500–4,000

60–400

SST1213

121/4

500–4,000

60–400

SST913

6, 81/2

500–4,000

60–400

TBRS613

6, 7 ∕8, 81/2, 83/4

500–4,000

60–400

SDI611

7

60–400

60–400

GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW

500–4,000

60–400

81/2, 121/4

500–4,000

60–400

ZR713

83∕8

500–4,000

60–400

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2

500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

Ulterra U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U513M U513M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U609M U609M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U613M U613M CF U709M U709M CF U709M U709M CF U709M U709M CF U709M U709M CF U709M U709M CF U709M U709M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U713M U713M CF U809M U809M CF U809M U809M CF U809M U809M CF U809M U809M CF U809M U809M CF U809M U809M CF U813M U813M CF U813M U813M CF U813M U813M CF U813M U813M CF U813M

IADC code M332 M332 M333 M333 M334 M334 M432 M432 M433 M433 M434 M434 M342 M342 M343 M343 M344 M344 M442 M442 M443 M443 M444 M444 M332 M332 M333 M333 M334 M334 M432 M432 M433 M433 M434 M434 M342 M342 M343 M343 M344 M344 M442 M442 M443 M443 M444 M444 M332 M332 M333 M333 M334 M334 M432 M432 M433 M433 M434 M434 M342 M342 M343 M343 M344 M344 M442 M442 M443 M443 M444 M444 M332 M332 M333 M333 M334 M334 M432 M432 M433

Special features/ usage

83/4

Size range, in.

VIS613 Z8

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

500–5,000 500–4,000

Recommended rotary speed, rpm

MDI611

MI913

41∕8

Recommended WOB, lb/in. diameter

60–400

MI909

Recommended WOB, lb/in. diameter

MDI511 MDI513

GHMNRstUmVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW GHMNRstUhVW GHMNRstUmVW

Size range, in.

60–400

4 ∕8, 6, 6 ∕8, 61/4, 63/4, 77∕8 61∕8, 63/4 1

IADC code

500–4,500

M233 57∕8, 6, 61∕8, 61/4, 61/2, 500–4,000 63/4, 77∕8, 81/2, 83/4 6, 61∕8, 61/2, 81/2, 83/4 500–4,500

MDI413

7

Manufacturer, Bit name/model number

Recommended rotary speed, rpm 60–400

61/2, 81/2

Special features/ usage

Recommended WOB, lb/in. diameter 500–4,000

Size range, in.

60–400

IADC code

Manufacturer, Bit name/model number

500–4,000

MDI313

GHMNRstUmVW GHMNRstUmVW GHMNRstUmVW BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU

500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000

BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU

U913S U913S CF U913S FB U913S U913S CF U913S FB U913S U913S CF U913S FB U913S U913S CF U913S FB U913S U913S CF U913S FB Varel R809 R909 R813

R913 R816 R916

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

S333 S333 S333 S334 S334 S334 S432 S432 S432 S433 S433 S433 S434 S434 S434

23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

M443 45∕8, 51/2, 55∕8, 53/4, 57∕8, 6, 63/4, 81/2, 121/4 M443 53/4, 57∕8, 6, 61∕8, 61/2, 81/2

Special features/ usage

23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Recommended rotary speed, rpm

S344 S344 S344 S442 S442 S442 S443 S443 S443 S444 S444 S444 S332 S332 S332 S333 S333 S333 S334 S334 S334 S432 S432 S432 S433 S433 S433 S434 S434 S434 S342 S342 S342 S343 S343 S343 S344 S344 S344 S442 S442 S442 S443 S443 S443 S444 S444 S444 S332 S332 S332 S333 S333 S333 S334 S334 S334 S432 S432 S432 S433 S433 S433 S434 S434 S434 S342 S342 S342 S343 S343 S343 S344 S344 S344 S442 S442 S442 S443 S443 S443 S444 S444 S444 S332 S332 S332

Recommended WOB, lb/in. diameter

U709S U709S CF U709S FB U709S U709S CF U709S FB U709S U709S CF U709S FB U709S U709S CF U709S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U713S U713S CF U713S FB U809S U809S CF U809S FB U809S U809S CF U809S FB U809S U809S CF U809S FB U809S U809S CF U809S FB U809S U809S CF U809S FB U809S U809S CF U809S FB U813S U813S CF U813S FB U813S U813S CF U813S FB U813S U813S CF U813S FB U813S U813S CF U813S FB U813S U813S CF U813S FB U813S U813S CF U813S FB U909S U909S CF U909S FB U909S U909S CF U909S FB U909S U909S CF U909S FB U909S U909S CF U909S FB U909S U909S CF U909S FB U909S U909S CF U909S FB U913S U913S CF U913S FB

Recommended WOB, lb/in. diameter

BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU

Size range, in.

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

IADC code

Special features/ usage

500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000

Manufacturer, Bit name/model number

Recommended rotary speed, rpm

27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 27∕8–181/2 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28 23/4–28

Recommended WOB, lb/in. diameter

M433 M434 M434 M342 M342 M343 M343 M344 M344 M442 M442 M443 M443 M444 M444 M332 M332 M333 M333 M334 M334 M432 M432 M433 M433 M434 M434 S332 S332 S332 S333 S333 S333 S334 S334 S334 S432 S432 S432 S433 S433 S433 S434 S434 S434 S342 S342 S342 S343 S343 S343 S344 S344 S344 S442 S442 S442 S443 S443 S443 S444 S444 S444 S332 S332 S332 S333 S333 S333 S334 S334 S334 S432 S432 S432 S433 S433 S433 S434 S434 S434 S342 S342 S342 S343 S343 S343

Size range, in.

IADC code

Manufacturer, Bit name/model number U813M CF U813M U813M CF U909M U909M CF U909M U909M CF U909M U909M CF U909M U909M CF U909M U909M CF U909M U909M CF U913M U913M CF U913M U913M CF U913M U913M CF U913M U913M CF U913M U913M CF U913M U913M CF U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U513S U513S CF U513S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U609S U609S CF U609S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U613S U613S CF U613S FB U709S U709S CF U709S FB U709S U709S CF U709S FB

500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000 500–4,000

50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400 50–400

BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU BCDEFGSU BCDEFGSU BCEFGSU

1,000–3,500 50–400

BGTPDG1G2G3LHNUXR BGTPDG1G2G3LHNUXR BGTPDG1G2G3LHNUXR

1,000–3,500 50–400

M433 55∕8, 57∕8, 6, 61∕8, 61/2, 1,000–3,500 50–400 63/4, 71/2, 73/4, 83∕8, 81/2, 83/4, 91/2, 97∕8, 105∕8, 115∕8, 121/4 M433 41/2, 43/4, 57∕8, 6, 61∕8, 1,000–3,500 50–400 61/4, 63/4, 83/4, 12, 121/4, 171/2 1,000–3,500 50–400 M423 77∕8, 121/4 M423 77∕8, 81/2, 83/4, 16, 171/2

1,000–3,500 50–400

PDC Enlarge while drilling Tri–Max EWD DTS

43∕8×6, 6×71/4, 81/2×97∕8, 105∕8×123/4, 121/4×143/4, 143/4×171/2, 171/2×23 Bi–center PDC drill bits

Underream while drilling

Smith Bits QDM4209

3

500–4,000

60–400

QDM7309

61/2

500–4,000

60–400

QDMI4209

3, 47∕8

500–4,000

60–400

QDS3209

55∕8

500–4,000

60–400

QDS4209

7

500–4,000

60–400

PDC coring bits Bit–Tech CP– M232 440BUP CP– M242 440BUP Halliburton FCBT201Li M613 CBT103UF M623 FCBT261Li M623 FCBT281Li M623 FCT201 M623 FCT201Li M623 FCBT261 M633 CB401 M613 CB403 M613 CB303 M712 CB201SB M713 CB303UF M713 CB313 M713 ReedHycalog Bits CCP911 S232, S233, S332, S432 CEP911 S433 IEP911

BGTPDG1G2G3LHNUXR BGTPDG1G2G3LHNUXR BGTPDG1G2G3LHNUXR

GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW

77∕8, 81∕2, 83∕4

300–2,000

50–300

AFGMVW

1

6, 6 ∕8

300–2,000

50–300

AFGMVW

121/4 97∕8 57∕8–61∕8 83∕8–81/2 81/2–91/4 83∕8 41∕8–71/2 51/2–81/2 63/4 61/4 81/2 81/2–121/4 6–81/2

250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 250–3,500 500–2,000 500–2,000 500–2,000 500–2,000

80–140 110–150 110–150 110–150 110–150 110–150 110–150 80–140 80–140 60–400 60–400 60–400 60–400

I I I I I I I I I IMN MN MN MN

6,  61∕8,  61∕4,  61∕4,   61∕2,  63∕4,  83∕4

300–2,000

50–150

GUl

81∕2 300–2,000 50–150 31∕2 300–2,000 50–150 Surface set diamond coring bits

GUl GUl

Bit–Tech CN–404P M812 6, 61∕8, 77∕8, 83/4 CN– M812 61∕8, 77∕8, 81/2, 83/4 404RSP CN– M842 61∕8, 63/4 424BLP

750–2,500 750–2,500

60–120 60–120

AGKM AGKM

750–2,500

60–120

AGMR

World Oil® / JANUARY 2017 D-37

Bit–Tech DN–304P M813 41∕2–43∕4, 51∕2–61∕2 1,000–3,000 DN–424P M812 13∕4, 17∕8, 21∕8, 21∕4, 1,000–3,000 7 5 1 3 2 ∕16, 3 ∕8, 4 ∕2, 4 ∕4, 61∕8, 61∕4, 61∕2, 63∕4 DB Bits DSM M711 37∕8–121/4 200–4,000 DT6R M713 37∕8–83/4 200–4,000 DT6X M713 37∕8–83/4 200–4,000 ST (Side- M811 37∕8–121/4 200–4,000 Track) Halliburton TB26 M711 57∕8 300–3,000 TB26 M712 33/4–12 300–3,000 TB26i M712 33/4–12 300–3,000 TB26ST M712 33/4–12 300–3,000 TB26STi M712 33/4–12 300–3,000 TB26 M713 97∕8 300–3,000 Smith Bits DST12 M711 33∕4, 55∕8, 6, 61∕8, 61∕4, 400–4,000 61∕2, 77∕8, 81∕2, 83∕4 Varel N300 M714 31∕2, 171∕2 400–2,500 Impregnated diamond bits

80–140 80–140 110–150 110–150 110–150 110–150 110–150

60–120 60–500 60–500 80–180

O GHMR GHMK GHMR

80–1,000 80–1,000 80–1,000 80–1,000 80–1,000 80–1,000

MN IMN IMN IMN IMN IMN

60–2,000 GHDMNKNUhW 50–1,000 BTDGU

500–2,000

60–400

Ci3122

M842 51/2

500–2,000

60–400

Ci3102C

M843 51/2–55∕8

500–2,000

60–400

Ci3106C

M843 61/4

500–2,000

60–400

Ci3122C

M843 55∕8–6

500–2,000

60–400

Ci3124C

M843 51/2–6

500–2,000

60–400

Ci3126C

M843 6–61∕8

500–2,000

60–400

Ci3146C

M843 83∕8–81/2

500–2,000

60–400

Ci3152

M843 8 ∕8

500–2,000

60–400

Ci3206C

M843 121/4

500–2,000

60–400

i110 i210 i212 i216 i220 TF410D TF508 TF508D TF510 TF510D TF512D TF516D TF608 TF610 TF610D

M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843

300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000

80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600

57∕8–81/2 57∕8–85∕8 81/2–9 121/4 121/2–161/2 81/2 55∕8–61∕8 6–61∕8 65∕8–85∕8 6–81/2 91/2 121/4 61∕8 61/2 57∕8–81/2

D-38 2017 Drill Bit Classifier

I I I I I I I

60–1,000 Custom 60–1,000 ADGHMNR

Halliburton Ci3182 M813 6

3

GMRUh

MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst

250–2,500

Ci3156s

M844 81/2

250–2,500

i208 M844 33/4 300–3,000 Smith Bits 1 7 3 K503 M842 4 ∕8, 5 ∕8, 6, 61/4, 8 ∕8, 400–4,000 60–2,000 81/2, 105∕8, 121/4 K505 M842 57∕8, 6, 61∕8, 63/4, 400–4,000 60–2,000 81/2, 161/2 K507 M842 6, 61∕8, 83∕8, 81/2, 91/2, 400–4,000 60–2,000 105∕8, 121/4 K515 61∕8, 63/4 400–4,000 60–2,000 K517 83∕8 400–4,000 60–2,000 K527 83∕8 400–4,000 60–2,000 K605 61∕8, 63/4 400–4,000 60–2,000 K607 81/2, 121/4 400–4,000 60–2,000 K703 M842 41/2, 45∕8, 6, 81/2 400–4,000 60–2,000 K705 M842 61∕8, 61/2, 65∕8, 81/2, 400–4,000 60–2,000 91/2, 121/4, 127∕8, 131∕8, 17 K715 81/2 400–4,000 60–2,000 K953 61∕8 400–4,000 60–2,000 KC507 6 400–4,000 60–2,000 KCR507 81/2 400–4,000 60–2,000 KGR50 57∕8, 83∕8 400–4,000 60–2,000 KH509 35∕8 400–4,000 60–2,000 5 7 KH613 5 ∕8, 5 ∕8 400–4,000 60–2,000 KH713 6 400–4,000 60–2,000 KH813 M433 83∕8, 81/2, 121/4 400–4,000 60–2,000 KHI613 81/2 400–4,000 60–2,000 KHI813 81/2, 105∕8 400–4,000 60–2,000 KHR716 57∕8 400–4,000 60–2,000 1 KZ505 6, 6 ∕8 400–4,000 60–2,000 KZ507 81/2 400–4,000 60–2,000 KZ607 81/2 400–4,000 60–2,000 Impregnated diamond coring bits Dowdco Coring CL– M–843 41/2×17∕8, 51/2×21∕8, 200–4,000 61∕8×21∕8, 6×25∕8, IMPREG 61∕8×25∕8, 61/2×25∕8, 61∕8×31/2, 61/2×31/2, 63/4×31/2, 727∕32×31/2, 727∕32×4, 81/2×4, 83/4×4 600–4,000 MCT586 57∕8×29∕16, 81/2×4 Halliburton 1 1 Ci3124C M844 5 ∕2–6 ∕2 250–2,500

50–140

50–70

M843 83∕8–83∕4

250–3,500

50–70

Ci3206C

M843 121∕4

250–4,000

50–70

Varel CI1613 CI1213

M842 81/2, 121/4 M842 57∕8, 6

Smith Bits H1006D HAMM H1206 HAMM H1206D HAMM H1209 HAMM H1209D HAMM H1411 H1411MD H1509 H1512 H1809 H1809D H2415D

HAMM HAMM HAMM HAMM HAMM HAMM HAMM

63/4 81/2, 83/4 83/4 83∕8, 81/2, 87∕8, 11 83∕8, 81/2, 85∕8, 83/4, 87∕8 12, 121/4, 123∕8, 127∕8 121/4, 123∕8 121/4, 123∕8 87∕8, 127∕8 171/2 171/2 24

GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW

IMPREG

150–500 MWNIUh

Ci3146C

500–2,500 500–2,500 Hammer bits

GHMNUhVW

F Impregnated F Impregnated F Impregnated

50–1,000 G 50–1,000 G

250–500 250–500 250–500 300–700 300–700

40–20 40–20 40–20 40–20 40–20

AWP AP AWP AP AWP

300–600 300–600 300–600 400–650 400–600 400–600 400–600

40–20 40–20 40–20 40–20 40–20 40–20 40–20

AP AP AP AP AP AWP AWP

Extremely Hard Steel tooth roller cone bits

Tri–Max TM321 Varel DT6

321

6–171/2

236S 41/2, 4 ∕8, 43/4, 4 ∕8 5

7

2,000–5,000 60–85

DG

2,000–5,000 300–50

SMW

Special features/ usage

Size range, in.

M844 7 ∕8–81/2 M844 77∕8–81/2

Recommended rotary speed, rpm

250–2,500

Ci3156B Ci3156C

3

Recommended WOB, lb/in. diameter

250–2,500

NMVWRst NMVWRst NMVWRst NMVWRst F Impregnated 50–70 F Impregnated 50–70 F Impregnated 50–70 F Impregnated 50–70 F Impregnated 50–70 F Impregnated 80–1,600 NMVWRst

Size range, in.

250–2,500

M844 81/2

80–1,600 80–1,600 80–1,600 80–1,600 50–70

IADC code

M844 81/2

Ci3146B

300–3,000 300–3,000 300–3,000 300–3,000 250–2,500

Manufacturer, Bit name/model number

Ci3146

81/2–121/4 61∕8 61/2 81/2–121/4 81/2

Special features/ usage

M843 M843 M843 M843 M844

Recommended rotary speed, rpm

TF616D TF708 TF710 TF816D Ci3126s

Recommended WOB, lb/in. diameter

IADC code

50–140

GMRUh

Manufacturer, Bit name/model number

50–140

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Dowdco Coring CN–54–R M–811 41/2×17∕8, 51/2×21∕8, 300–3,500 61∕8×21∕8, 6×25∕8, 61∕8×25∕8, 61/2×25∕8, 61∕8×31/2, 61/2×31/2, 63/4×31/2, 727∕32×31/2, 727∕32×4, 81/2×4, 83/4×4 TSP–54–R M–591 41/2×17∕8, 51/2×21∕8, 300–3,500 61∕8×21∕8, 6×25∕8, 61∕8×25∕8, 61/2×25∕8, 61∕8×31/2, 61/2×31/2, 63/4×31/2, 727∕32×31/2, 727∕32×4, 81/2×4, 83/4×4 Halliburton CT103 M613 51/4–57∕8 250–3,500 CT303HS M613 83∕8–81/2 250–3,500 CT103FD M623 121/4 250–3,500 CT103UF M623 6–121/4 250–3,500 CT103X M623 81/2 250–3,500 CT303 M623 51/4 250–3,500 CT403 M623 51/2–61/2 250–3,500 Surface set diamond bits

Insert roller cone bits Baker Hughes STX–99 837 VG–90 837 VG–90G 837 VG–95 837 Halliburton EQH93R 817 EQH91DR 837 EQH91R 837 EQH99D2R 837 EQH99R 837 QH99 837 ReedHycalog Bits R74 747 R75 747 R85 837 R90 747 RH75 747 RH80 837 RH90 837 Smith Bits F80Y 817Y FHI80Y 817Y FHI90Y 837Y GF80Y 817Y TIX–TSK A90 832Y A90 832Y X90G 837Y Tri-Max TM832 832 TM837 837 Varel HE85 837Z HE95 837Z Baker Hughes HC408 M433 HC409 M433 HC410 M433 HC508 M423 HC608 M323 HC609 M423 HCD408 M433 Q308F M333 Q408 M333 Q408F M333 Q409 M433 Q508 M323 Q508F M323 Q509 M423 Q509F M423 Q608F M323 Q609 M423 QD308 M333 QD308F M333 QD408 M333 QD408F M333 QD508 M323 QD508F M323 QD509 M423 QD509F M423 QD608 M323 QD608F M323 QT308 M333 QT408 M333 QT508 M323 QT509 M423 QT608 M323 T408 M333 T408F M333 T508 M323 T508F M323 T608 M323 T608F M323 TD408 M333 TD408F M333 TD508 M323 TD508F M323 TD608 M323 TD608F M323

61/2 121/4 121/4 81/2

2,000–5,300 2,900–7,300 2,900–7,300 2,900–7,300

140–70 95–50 95–50 95–50

WX BGWX BGWX BGWX

83/4–97∕8 61∕8 61∕8 81/2–121/4 83/4–121/4 53/4

4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500 4,000–7,500

35–140 35–140 35–140 35–140 35–140 35–140

GMYW GMYW GMYW GMYWC GMYWC GMYW

105∕8 121/4 57∕8, 6, 61∕8, 61/2, 83/4 6, 61∕8, 61/2, 77∕8, 105∕8, 121/4 121/4 121/4 121/4

3,500–6,500 3,500–6,500 3,500–6,500 3,500–6,500

80–40 80–40 80–40 80–40

GMWY GMWY GMWY GMWY

3,500–6,500 80–40 3,500–6,500 80–40 3,500–6,500 80–40

GMWY GMWY GMWY

83/4 121/4 83/4 81/2

3,000–7,000 3,000–7,000 4,000–7,000 3,000–7,000

Y Y Y BGHMY

110–50 110–50 110–50 280–50

63/4, 75∕8, 15 2,500–5,000 50–30 9, 95∕8, 97∕8, 11, 121/4 3,000–6,000 50–30 81/2, 121/4 3,000–6,500 60–40 6–121/4 6–121/4

2,000–5,500 60–100 2,000–5,500 60–85

83∕4 81∕2, 83∕4

2,500–7,000 300–50 2,500–7,000 300–50 PDC drill bits

31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28 31∕8–28

235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500 235–2,500

350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50 350–50

AY AY GY

MW MW

DGVW DGMVW DGMVW DGVW DGVW DGMVW DGMVW DGVW DGVW DGVW DGMVW DGVW DGVW DGMVW DGMVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW DGVW DGMVW DGVW DGVW DGVW DGVW DGVW DGVW DGMVW DGMVW DGMVW DGMVW DGMVW DGMVW

63/4

500–4,500

60–400

MDI511

61∕8, 63/4

500–4,500

60–400

MDI611

6, 6 ∕8, 61/2, 81/2, 83/4 500–4,500

60–400

1

MDI711

M333 61∕8, 61/2, 63/4

500–4,500

60–400

MDI811

61/2

500–4,500

60–400

MDSI509

57∕8, 6

500–5,000

60–400

MDSI711

81/2

500–4,500

60–400

MDSI811

61/2

500–4,500

60–400

MDSIZ811

61/2

500–4,500

60–400

MI609

41∕8

500–5,000

60–400

500–4,500

60–400

500–5,000

60–400

500–4,500

60–400

500–4,500

60–400

MI711 MI909 MSI711 SDI511 SDI611

M333 6 4 ∕8 1

M433 53∕8, 55∕8, 57∕8, 6, 61∕8, 61/4 63/4

60–400

SDI711

6, 61/4, 61/2, 63/4, 77∕8, 500–4,500 81/2, 83/4, 97∕8 6, 61/4, 61/2, 63/4 500–4,500

SDIZ611

83/4

60–400

Ulterra U609M U611M U613M

U616M

U709M U711M U713M

U716M

U809M U811M

U813M

U816M U909M U913M U916M U613S U616S

M443 45∕8, 43∕4, 61∕8 M332, 41∕2, 43∕4, 6, 63∕4, M333 M332, 61∕8, 61∕2, 63∕4, 77∕8, M333, 81∕2, 83∕4, 91∕2, 121∕4, M334, M432, M433, M434 M323, 61∕8, 77∕8, 83∕8, 81∕2, M324, 83∕4, 91∕2, 97∕8, 105∕8, M422, 11, 12, 121∕4, 131∕2, M423, 143∕4, M424, M432, M433 M443 61∕2 M333, 57∕8, 61∕8, 63∕4, M434 M333, 61∕8, 77∕8, 83∕8, 81∕2, M334, 83∕4, 121∕4, M423, M424, M432, M433, M434, M443 M323, 77∕8, 83∕8, 81∕2, 83∕4, M324, 97∕8, 105∕8, 12, M423, 121∕4, 16, M424, M433 M342, 61∕8, 61∕2, 77∕8, 83∕4, M443 M333, 61∕8, 77∕8, 81∕2, 83∕4, M424, M433, M443 M233, 6, 61∕8, 63∕4, 77∕8, M333, 83∕8, 97∕8, 105∕8, 11, M423, 121∕4, M433, M434 M323, 81∕2, 83∕4, 91∕2, 97∕8, M423, 121∕4, 171∕2, M424 M442, 61∕2, 63∕4, M443 M433, 83∕4, 97∕8, M434 M323 77∕8 S332, 61∕8, 61∕4, 61∕2, 63∕4, S432 77∕8, 83∕8, 83∕4, S323, 77∕8, 81∕2, 83∕4, 97∕8, S422, 11, 121∕4, 143∕4, S423, 171∕2, S424

500–4,500

60–400

500–4,000 500–4,000

Variable Variable

BCDEFGSU BCDEFGSU

500–4,000

Variable

BCDEFGSU

500–4,000

Variable

BCDEFGSU

500–4,000 500–4,000

Variable Variable

BCDEFGSU BCDEFGSU

500–4,000

Variable

BCDEFGSU

R913 R1013

Variable

BCDEFGSU

PDC Bi–Center drill bits 3

500–4,000

60–400

QDM7309

61/2

500–4,000

60–400

QDMI4209

47∕8

500–4,000

60–400

QDS3209

55∕8

500–4,000

60–400

PDC Enlarge while drilling Tri-Max EWD RKS

43∕8×6, 6×71/4, 81/2×97∕8, 105∕8×123/4, 121/4×143/4, 143/4×171/2, 171/2×23 (special Hard Formation Tool) PDC coring bits

ReedHycalog Bits 300–2,000 50–149 CCP1008 M232  81∕2 Surface set diamond coring bits Bit–Tech CN– M812 405RSP CN– M842 425BLP Halliburton CT17BDiL M723 CT93 M723 CT93HS M723 CBT303 M813 Varel CB600 Bit–Tech DN405RSP M812 DB Bits DN-41T M814 DP9X M812 Drill Master, Inc. MD246 M843 Smith Bits DST12 M711

1,000–3,000 60–90

AGKUhW

61∕8, 63∕4

1,000–3,000 60–90

AGRUhW

81/2 81/2–121/4 81/2 57∕8–81/2

500–2,000 500–2,000 500–2,000 500–2,000

6, 81∕2

500–2,500 Surface set diamond bits

Ci3102C

M843 51/2–55∕8

500–2,000

60–400

Ci3106C

M843 61/4

500–2,000

60–400

Ci3122C

M843 55∕8–6

500–2,000

60–400

Ci3124C

M843 51/2–6

500–2,000

60–400

Ci3126C

M843 6–61∕8

500–2,000

60–400

Ci3146C

M843 83∕8–81/2

500–2,000

60–400

Ci3152

M843 83∕8

500–2,000

60–400

Ci3206C

M843 121/4

500–2,000

60–400

i110 i210 i212 i216 i220 TF410D TF508 TF508D TF510 TF510D TF512D TF516D TF608 TF610 TF610D TF616D TF708 TF710 TF816D Ci3126s

M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M843 M844

300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 300–3,000 250–2,500

80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 80–1,600 50–70

57∕8–81/2 57∕8–85∕8 81/2–9 121/4 121/4–161/2 81/2 55∕8–61∕8 6–61∕8 65∕8–85∕8 6–81/2 91/2 121/4 61∕8 61/2 57∕8–81/2 81/2–121/4 61∕8 61/2 81/2–121/4 81/2

MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated MNR Impregnated NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst NMVWRst F Impregnated F Impregnated F Impregnated F Impregnated F Impregnated F Impregnated NMVWRst

M844 81/2

250–2,500

50–70

Ci3146B

M844 81/2

250–2,500

50–70

6–181∕2

500–4,000

500–75

MNDIRWUh

Ci3156B

M844 73∕8–81/2

250–2,500

50–70

60–2,000 GHDMNKNUhW

Ci3156C

M844 77∕8–81/2

250–2,500

50–70

Ci3156s

M844 81/2

250–2,500

50–70

300–3,000

80–1,600

300–3,000

80–1,200 MNRImpregnated 80–1,200 MNRImpregnated 80–1,200 MNRImpregnated 80–1,200 MNRImpregnated

M814 31∕2, 171∕2 400–2,500 50–1,000 BTDGU Impregnated diamond bits

Baker Hughes HHDS358 M842 83∕8

500–2,500

HHS178

M842 33/4

500–2,500

500–4,000

Variable

BCDEFGSU

IR120E

M842 143/4

500–2,500

IR212

M842 57∕8

500–2,500

IR212E

M842 6, 61∕8

500–2,500

IR215E

M842 81/2

500–2,500

IR216E

M842 81/2, 85∕8

500–2,500

IR307

60–400

Ci3146

500–2,500

BCDEFGSU

500–2,000

TURBINE GHKNUh 60–500 GHKMUh

M842 5 ∕8, 6

Variable

700–150 MNRUhImpregnated

1,000–4,000 60–120

33/4, 55∕8, 6, 61∕8, 61/4, 400–4,000 61/2, 77∕8, 81/2, 83/4

Custom

500–3,500

Halliburton Ci3122 M842 51/2

200–4,000 200–4,000

HHS352

500–4,000

50–1,000 DG

80–1,600 MNFImpregnated

37∕8–83/4 37∕8–83/4

BCDEFGSU

BCDEFGSU

60–400 60–400 60–400 60–400

500–2,500

Drill Master, Inc. MI810 M841 6–181∕2

31∕2–83∕4

Variable

Variable

GUl

61∕8, 77∕8, 81∕2, 83∕4

500–4,000

500–4,000

GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW

Special features/ usage

IADC code

M433 41/2, 43/4, 57∕8, 6, 61∕8, 1,000–3,500 50–400 61/4, 63/4, 83/4, 12, 121/4, 171/2 M433 171/2 1,000–3,500 50–400

BGTPDG1G2G3LHNUXR BGTPDG1G2G3LHNUXR BGTPDG1G2G3LHNUXR

Recommended rotary speed, rpm

1,000–3,500 50–400

M842 121/4

Recommended WOB, lb/in. diameter

M433 53/4, 57∕8, 6, 61∕8, 61/2, 81/2

IR411

Size range, in.

BCDEFGSU BCDEFGSU

IADC code

Variable Variable

Manufacturer, Bit name/model number

500–4,000 500–4,000

Size range, in.

S424 81∕2 S422 16

Smith Bits QDM4209

Varel N500 500–4,000

Special features/ usage

MD611

Recommended rotary speed, rpm

60–400 60–400

U716S U816S Varel R909

Recommended WOB, lb/in. diameter

500–5,000 500–5,000

GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW GHMNRstUhVW

Manufacturer, Bit name/model number

Recommended rotary speed, rpm 60–400

Special features/ usage

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

500–5,000

Smith Bits M609 M442 31/2, 35∕8, 33/4, 37∕8, 41∕8, 41/2, 43/4 M909 M442 41∕8, 41/2, 43/4, 6, 61/2, 81/2 MCR509 35∕8

7

M842 6, 61/2

500–2,500

500–4,000

Variable

BCDEFGSU

IR309

M842 81/2, 85∕8

500–2,500

500–4,000

Variable

BCDEFGSU

IR311

M842 121/4

500–2,500

500–4,000 500–4,000

Variable Variable

BCDEFGSU BCDEFGSU

IR312E

M842 6, 61/4

500–2,500

500–4,000

Variable

BCDEFGSU

IR316E

M842 81/2, 85∕8

500–2,500

IR409

M842 83∕8

500–2,500

80–1,600 MNFImpregnated 80–1,600 MNFImpregnated 80–1,600 MNFImpregnated 80–1,600 MNFImpregnated 80–1,600 MNFImpregnated 80–1,600 MNFImpregnated 80–1,600 MNFImpregnated 80–1,600 MNFImpregnated 80–1,600 MNFImpregnated 80–1,600 MNFImpregnated 80–1,600 MNFImpregnated 80–1,600 MNFImpregnated 80–1,600 MNFImpregnated 80–1,600 MNFImpregnated

i208 M844 33/4 ReedHycalog Bits DD3540 M843 5, 57∕8, 6, 81∕2, 121∕4, 125∕8, 131∕8 DD3560 M843 57∕8, 6, 61∕8, 61∕2, 81∕2, 121∕4 DD4540 M843 53∕4, 61∕2, 77∕8, 81∕2, 85⁄8, 83∕4 DD4560 M843 61∕2, 63∕4, 83∕8, 81∕2, 91∕2, 97∕8, 105∕8, 143∕4, 16 DD5540 M843 6

300–3,000

DD5560

300–3,000

M843 57∕8

Smith Bits K503 M842 41∕8, 57∕8, 6, 61/4, 83∕8, 81/2, 105∕8, 121/4 K505 M842 57∕8, 6, 6 1/8, 63/4, 81/2, 161/2 K507 M842 6, 61∕8, 83∕8, 81/2, 91/2, 105∕8, 121/4 K515 61∕8, 63/4 K517 83∕8 K527 83∕8 K605 61∕8, 63/4 K607 81/2, 121/4 K703 M842 41/2, 45∕8, 6, 81/2 K705 M842 61∕8, 61/2, 65∕8, 81/2, 91/2, 121/4, 127∕8, 131∕8, 17

300–3,000 300–3,000 300–3,000

400–4,000

80–1,200 MNRImpregnated 80–1,200 MNRImpregnated 60–2,000 GHMNUhVW

400–4,000

60–2,000 GHMNUhVW

400–4,000

60–2,000 GHMNUhVW

400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000

60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000

GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW

World Oil® / JANUARY 2017 D-39

F913 F1213 F1613

400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000 400–4,000

M843 31/4, 35∕8

400–4,000

M843 41/2, 43/4, 61∕8, 61/4, 63/4 M843 51/2, 55∕8, 6, 61∕8, 61/4, 61/2 M843 77∕8, 83∕8, 81/2, 91/2

400–4,000

60–2,000 Impregnated 60–2,000 Impregnated 400–4,000 60–2,000 Impregnated 400–4,000 60–2,000 Impregnated Impregnated diamond coring bits

Halliburton Ci3124C M844 51∕2–61∕2

250–2,500

50–70

Ci3146C

M843 83∕8–83∕4

250–3,500

50–70

Ci3206C

M843 121∕4

250–4,000

50–70

Varel CI1613 CI1213 Varel F+613 F+713 F+913

M842 81/2, 121/4 500–2,500 50–1,000 G M842 57∕8, 6 500–2,500 50–1,000 G Hybrid PDC/Impregnated diamond bits M232 55∕8, 61∕8, 83∕8, 81/2, 400–4,000 89∕16, 83/4 M432 63/4, 81/2, 121/4, 131∕8 400–4,000 M432 83/4 400–4,000 Hammer bits

Smith Bits H1006D HAMM H1206 HAMM H1206D HAMM H1209 HAMM H1209D HAMM H1411 H1411MD H1509 H1512 H1809 H1809D H2415D

FImpregnated FImpregnated FImpregnated

HAMM HAMM HAMM HAMM HAMM HAMM HAMM

63/4 81/2, 83/4 83/4 83∕8, 81/2, 87∕8, 11 83∕8, 81/2, 85∕8, 83/4, 87∕8 12, 121/4, 123∕8, 127∕8 121/4, 123∕8 121/4, 123∕8 87∕8, 127∕8 171/2 171/2 24

60–2,000 PDGUX 60–2,000 PDGUX 60–2,000 PDGUX

250–500 250–500 250–500 300–700 300–700

40–20 40–20 40–20 40–20 40–20

AWP AP AWP AP AWP

300–600 300–600 300–600 400–650 400–600 400–600 400–600

40–20 40–20 40–20 40–20 40–20 40–20 40–20

AP AP AP AP AP AWP AWP

D-40 2017 Drill Bit Classifier

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number

Special features/ usage

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW GHMNUhVW

IADC code

60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000 60–2,000

Manufacturer, Bit name/model number

Special features/ usage

81/2 61∕8 6 81/2 57∕8, 83∕8 35∕8 57∕8 6, 61∕8 81/2 81/2

Recommended rotary speed, rpm

Recommended WOB, lb/in. diameter

Size range, in.

IADC code

Manufacturer, Bit name/model number K715 K953 KC507 KCR507 KGR50 KH509 KHR716 KZ505 KZ507 KZ607 Varel F613