Telestack Tracked Conveyors Brochure [PDF]

Zitiervorschau

www.telestack.com

Mobile Stockpiling Solutions

Track Conveyors

Mobile Stockpiling Solutions

Track Conveyors FUEL CONSUMPTION FROM ONLY 5 LITRES (1.32 GALLONS) Satisfied customers include Cemex, La Farge, Holcim, CRH, Anglo American, Rio Tinto, BHP Billiton, Mechel, Suek and many more. PER HOUR Telestack equipment has a proven record of performance and reliability, operating in all types of applications and climates around the world.

Eliminate double handling of material with wheel loaders Stockpiling rates from 100 - 1500TPH* Stockpiling 0 - 300mm (12inch down) material Environmental benefits – reduced noise, dust and emissions Safety benefits - less site traffic movement Discharge heights up to 12 metres (40ft) Conical stockpile up to 3,927 tonnes – 2,454m3 (3,210 yrds3 – 4,330 ton) ELIMINATE / REDUCE THE USE OF WHEEL LOADERS / TRUCKS!

Radial stockpile up to 15,123 tonnes – 9,452m3 (12,362 yrds3 – 16,670 ton)

*Based on bulk density of 1.6 t/m3 (100lbs / per cubic ft)

STOCKPILING – RECIRCULATING – LINKING – TRUCK LOADING – SHIPLOADING

TC 421 STOCKPILING FROM PRIMARY CRUSHER

TC 421 x2 – RECIRCULATING / STOCKPILING

TC 624 FED FROM WHEEL LOADER DISCHARGING INTO VESSEL – PARALLEL TRAVEL

HF 418 WITH INDEPENDENT FEEDER

HEAVY DUTY TRACKED TELESCOPIC AS LINK CONVEYOR FROM PRIMARY CRUSHER TO SECONDARY PLANT

AGGREGATES – SAND / GRAVEL – IRON ORE – COAL – FERTILISER – GRAIN – WOODCHIPS STANDARD OPTIONS: CRITICAL DESIGN FACTORS INCLUDE:

A Discharge height

E Conveyor working angle

B Stockpile Height

F Material angle of repose

C Conveyor length (Tip to Tip)

G Conveyor mid section depth

D Conveyor length (Drum centre)

H Material not fouling on tracks I Ground clearance and width J No added counterweight K Variable feed-in height

Dual power (electric driven belts) All electrical conveyor Radio remote control Upgrades for 0-300mm (0-12”) material Hydraulic folding tail section

C

Dust covers A

D

B

Dust suppression Automatic stockpile program Parallel travel tracks

G E

F J H

I

K

Feed-boot extensions Side skirting Anti-roll back measures

Despite the economic downturn, the demand for Telestack track conveyors has continued to increase. The main reason for this is the proven savings they offer crushing / screening customers. The continued success shows Telestack’s drive to offer innovative and cost effective solutions. Our track conveyors have been installed in 5 continents since 2007 in many different applications including stockpiling, shiploading / unloading and link conveyors. TRANSPORTATION & CONTAINERISATION The ease of transport of these units makes it very easy and cost efficient for transporting these units globally. Each Unit can be transported on a low loader trailer to move easily from site to site. Set up time on site is 15 minutes. Each unit can be packed into 1 x 40ft container and shipped anywhere in the world.

Low loader – RO - RO Transport

Facsimile

The Telestack factory is a state of the art manufacturing facility to ensure the highest standard of workmanship of all products.The customized heavy duty design and manufacturing processes are key to the success of the Telestack range of equipment in many different applications and industries globally.

Contact

8,000sq metres production facility

Telestack Limited Bankmore Way East Omagh, Co. Tyrone Northern Ireland BT79 0NZ Telephone

+44 (0)28 8225 1100 +44 (0)28 8225 2211 [email protected]

Loaded into 1 x 40ft container

Established 1999 as the specialist materials handling division of Loughside Engineering (est.1985) Highly experienced specialist workforce Complete in-house design, manufacture, installation and commissioning of all equipment Units fully built and tested prior to dispatch

www.telestack.com