45 0 2MB
Renault
Select the model:
Model Clio Sagem before 1999 Model Clio Sagem after 1999 Model Clio Jaeger before 1999 Model Clio Jaeger after 1999 Model Espace before 2000 Model Espace 2000 Model Kangoo before 1999 Model Kangoo ab 1999 Model Laguna Sagem after 1999 Model Laguna Jaeger Model Megane / Scenic Sagem before 1999 Model Megane / Scenic Sagem after 1999 Model Megane / Scenic Jaeger before 1999 Model Megane / Scenic Jaeger after 1999 Model Safrane Model Twingo
Renault
page 1
Model Clio Sagem before 1999 Use this board and clip:
•
Remove the cluster and open it.
•
Look for the silver chrystal and join its contacts.
•
Look for the 8 pin chip 93C46.
•
Connect the clip to port 1.
•
Put the clip on the chip 93C46 (red on pin 1).
•
Select the menu Renault-Clio II-Sagem
•
The Tacho Universal shows you the old value.
•
Select the menu Adjust KM.
•
Enter the new value.
•
Verify the new value with OK.
Renault
page 2
Model Clio Sagem after 1999 The instrument looks like this:
This instrument has to be sent to us or can be clocked with a seperate manual. If takes about 3 days time.
Renault
page 3
Model Clio Jaeger before 1999 Use this board and clip:
•
Remove the cluster and open it.
•
Look for the silver chrystal and join its contacts.
•
Look for the 8 pin chip 93C46.
•
Connect the clip to port 1.
•
Put the clip on the chip 93C46 (red on pin 1).
•
Select the menu Renault-Clio II-Jaeger C46
•
The Tacho Universal shows you the old value.
•
Select the menu Adjust KM.
•
Enter the new value.
•
Verify the new value with OK.
Renault
page 4
Model Clio Jaeger after 1999 Use the 908-Plug:
•
Remove the cluster and open it. You have to pull off the needles and unclip the motors carefully.
•
Look for the processor as shown in the picture. ÆVersion 1 is for instruments without rpm-instrument ÆVersion V is for instruments with rpm-instrument
•
Connect the cables as shown in the picture.
•
Connect the plug with the Tacho Universal.
•
Select the menu Renault-Clio II- Jaeger 908
•
The Tacho Universal shows you the old value.
•
Enter the new value.
•
Verify the new value with OK.
Renault
page 5
Version 1
Renault
page 6
Version 2
Renault
page 7
Model Espace before 2000 You have to send us this instrument.
Renault
page 8
Model Espace 2000 Use the 908-Plug:
•
Remove the cluster and open it.
•
Connect the cables as shown in the picture.
•
Connect the 908-Plug with the Tacho Universal.
•
Select the menu Renault-Espace 2000-Tacho
•
You need not enter a new value, programming will be done automatically.
•
Do not put the instrument back in now.
Renault
page 9
Renault
page 10
•
Remove the BCU and open it.
•
Connect the cables as shown in the picture.
•
Connect the 908-plug with the Tacho Universal.
•
Select the menu Renault-Espace 2000-Body Controller
•
The Tacho Universal shows you the old value.
•
Enter the new value. Verify the new value with OK.
•
Now put back in the BCU first, then the instrument.
Renault
page 11
Model Kangoo before 1999 Use this board and clip:
•
Remove the cluster and open it.
•
Look for the silver chrystal and join its contacts.
•
Look for the 8 pin chip 93C46.
•
Connect the clip to port 1.
•
Put the clip on the chip 93C46 (red on pin 1).
•
Select the menu Renault-Kangoo
•
The Tacho Universal shows you the old value.
•
Select the menu Adjust KM.
•
Enter the new value.
•
Verify the new value with OK.
Renault
page 12
Model Kangoo ab 1999 Use the 908-Plug:
•
Remove the cluster and open it. You have to pull off the needles and unclip the motors carefully.
•
Look for the processor as shown in the picture.
•
Connect the cables as shown in the picture.
•
Connect the plug with the Tacho Universal.
•
Select the menu Renault-Clio II- Jaeger 908
•
The Tacho Universal shows you the old value.
•
Enter the new value.
•
Verify the new value with OK.
Renault
page 13
Renault
page 14
Model Laguna Sagem after 1999 Use this board and clip:
•
Remove the cluster and open it.
•
Look for the 8 pin chip 93C46.
•
Look for the silver chrystal and join its contacts.
•
Connect the clip to port 1.
•
Put the clip on the chip 93C46 (red on pin 1).
•
Select the menu Renault-Laguna 99
•
The Tacho Universal shows you the old value.
•
Select the menu Adjust KM.
•
Enter the new value.
•
Verify the new value with OK.
Renault
page 15
Model Laguna Jaeger You have to send us this instrument.
Renault
page 16
Model Megane / Scenic Sagem before 1999 Use this board and clip:
•
Remove the cluster and open it.
•
Look for the 8 pin chip 93C46.
•
Look for the silver chrystal and join its contacts.
•
Connect the clip to port 1.
•
Put the clip on the chip 93C46 (red on pin 1).
•
Select the menu Renault-Megane- Sagem 1 oder Sagem 2
•
The Tacho Universal shows you the old value.
•
Select the menu Adjust KM.
•
Enter the new value.
•
Verify the new value with OK.
Renault
page 17
Model Megane / Scenic Sagem after 1999 The instrument looks like this:
This instrument has to be sent to us or can be clocked with a seperate manual. If takes about 3 days time.
Renault
page 18
Model Megane / Scenic Jaeger before 1999 Use the Megane/206-Plug:
•
Remove the cluster.
•
Remove the white cover on the rear side.
•
Look for the processor as shown in the picture.
•
Connect the cables as shown in the picture.
•
Connect the plug with the Tacho Universal.
•
Select the menu Renault-Megane-Jaeger
•
The Tacho Universal shows you the old value.
•
Enter the new value.
•
Verify the new value with OK.
Renault
page 19
Model Megane / Scenic Jaeger after 1999 Use the 908-Plug:
•
Remove the cluster and open it. You have to pull off the needles and carefully unclip the motors.
•
Look for the processor.
•
Connect the cables as shown in the picture, depending on what version it is.
•
Connect the plug with the Tacho Universal.
•
Select the menu Renault-Megane- Jaeger 908
•
The Tacho Universal shows you the old value.
•
Enter the new value.
•
Verify the new value with OK.
Renault
page 20
Version 1
Renault
page 21
Version 2
Renault
page 22
Model Safrane: Use this board and clip:
•
Remove the cluster and open it.
•
Look for the 8 pin chip 93C46 oder 93C56.
•
Look for the silver chrystal and join its contacts.
•
Connect the clip to port 1.
•
Put the clip on the chip 93C46 oder 93 C56 (red on pin 1).
•
Select the menu Renault Safrane- Safrane C46 V1 or Safrane C46 V2 or Safrane C56 or Safrane Mod 99
•
The Tacho Universal shows you the old value.
•
Select the menu Adjust KM.
•
Enter the new value.
•
Verify the new value with OK.
Renault
page 23
Model Twingo Use the Alfa 145/146/Twingo-Plug:
•
Remove the cluster and open it.
•
Lift the pin for the red cable.
•
Connect the cables as shown in the picture.
•
Connect the power plug to the 15pin port. Red on pin 1.
•
Connect the plug with the Tacho Universal.
•
Select the menu: Renault-Twingo-Twingo VDO or
Twingo Borg
Warning: Ensure you use the correct program version! •
The Tacho Universal shows you the old value.
•
Enter the new value.
•
Verify the new value with OK.
Renault
page 24
Renault
page 25