Training Program Orinox Formation 2019 [PDF]

Zitiervorschau

Training Program AVEVA PLANT

ORINOX, Enhance your Digital Asset

OVERVIEW ORINOX is a “global” software consulting, Plant Design and Engineering firm specializing in the digitalization of physical assets using the AVEVA suite of products. We operate across many sectors including oil & gas, nuclear, energy, chemical, pharmaceutical, and food processing. AVEVA is the global leader in plant, power and naval engineering solutions. It chose to partner with Orinox as a Registered AVEVA Global Services Provider. This partnership will allow a bigger unit with multidiscipline knowledge across many industry sectors such as Plant Design and Engineering business functions. We have designed training programs for a wide range of the AVEVA suite software’s and for multiple designing skills included but not limited to (PDMS, E3D, Diagrams, P&ID, and Engineering). Our beginner courses provide a foundation for best practices, while our advanced courses are used to develop proficiency and competency with the corresponding modules (Advanced User, Administration, and Catalogue). Our training sessions offer shortcuts and "best practices" for AVEVA IE&D based design and data management. Manuals and training guides may be adapted for specific customer needs upon request. Our expert training instructors have years of experience in plant and piping design, structural, civil engineering, and mechanical design. They encounter the same challenges as our EPC and OwnerOperator customers, which gives them a unique perspective to keep all training materials both current and relevant. Orinox offers training sessions worldwide, both in-house and at client offices. Current training sessions have the capacity to train 1 to 6 people simultaneously per session, depending on the ability level of participants and the requested content. We offer fast response times, so sessions may be held with very little delay throughout the year.

AVEVA PDMS

AVEVA Diagrams

AVEVA E3D

AVEVA Engineering

Auteur : Emmanuel Morvan

Date : 11/04/2019

Réf. : Training_Program Page : 2 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

TRAINING CENTERS HOUSTON, TX-UNITED STATES

CHATEAUBRIANT-FRANCE

LYON-FRANCE

Auteur : Emmanuel Morvan

PARIS-FRANCE

KUALA LUMPUR-MALAYSIA

Date : 11/04/2019

Réf. : Training_Program Page : 3 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

TRAINING APPROACH Trainees will be immersed in realistic and engaging training exercises that replicate the design process across multiple sector: Oil & Gas, Nuclear, Energy, Chemical, Environmental, Pharmaceutical, and Food Processing.

3.1.

Resources

Dedicated Workspace available for training sessions. Conference rooms and collaboration areas will be available for use.

Training supports including manuals and exercises are given to each trainee upon arrival. A complementary USB Flash Drive key will also be provided; the key contains the training supports in digital format, as well as some utilities such as "freeware" and macros for use in the AVEVA Software.

3.2.

Course content

Different types of interactive courses, exercises and actual cases drawn from different industrial fields. All work will be supervised; constant monitoring will allow the instructor to verify the correct progression of each trainee.

3.3.

Means of Evaluation

Following the various practical sections and exercises, a course certificate will be given out to each trainee upon completion of the training sessions.

Auteur : Emmanuel Morvan

Date : 11/04/2019

Réf. : Training_Program Page : 4 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

LOCATIONS AND TIMES In our offices or on customer site.

Houston, Texas

9900 Westpark Drive, Suit 307, Houston,TX 77063 +1 (346)240-3901

Châteaubriant,France

3 avenue du Bataillon Carmagnole liberté Bâtiment K1 2eme étage - 69120 VAULX EN VELIN +33 (0) 6 28 43 70 58

Lyon, France

213, Rue de Gerland Bât B4 69007 LYON +33 (0) 9 51 30 13 97

Paris, France

9/11 Allée de l'Arche 92671 COURBEVOIE +33 (0) 1 49 97 15 79

Munich, Germany

Landsbergerstrasse 155, 80687 Muenchen Germany +49 176 24 03 21 34

Calgary, Canada

17th Avenue SW, 4th floor Calgary, Alberta, T2T 0A4, Canada +1 (587)223-2057

Kuala Lumpur, Malaysia

Suite 2201-2203, 22nd Floor Plaza See Hoy Chan Jalan Raja Chulan 50200 Kuala Lumpur - MALAYSIA +33 240 072 340

Auteur : Emmanuel Morvan

Date : 11/04/2019

Réf. : Training_Program Page : 5 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

TRAINING PROGRAM

Training program AVEVA PLANT

Auteur : Emmanuel Morvan

Date : 11/04/2019

Réf. : Training_Program Page : 6 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

TRAINING FOR AVEVA TOOLS USER

ADMIN

MANAGE

Auteur : Emmanuel Morvan

AVEVA PDMS USER DESIGN

Page 8

AVEVA PDMS USER DRAFT

Page 9

AVEVA PDMS ADVANCE USER

Page 10

AVEVA E3D USER MODEL

Page 11

AVEVA E3D USER DRAW

Page 12

AVEVA DIAGRAMS USER

Page 13

AVEVA E3D UPGRADE E3D2.1

Page 14

AVEVA SCHEMATIC 3D INTEGRATOR USER

Page 15

AVEVA USER MDS

Page 16

AVEVA ADMIN PROJECT

Page 17

AVEVA ADMIN DRAFT

Page 18

AVEVA ADMIN ISODRAFT

Page 19

AVEVA ADMIN DIAGRAMS

Page 20

AVEVA ADMIN ENGINEERING

Page 21

AVEVA ADMIN MDS

Page 22

AVEVA CATALOGUE PIPING

Page 23

AVEVA ENGINEERING USER

Page 24

AVEVA REVIEW

Page 25

LANGUAGE PML 1 & 2

Page 26

Date : 11/04/2019

Réf. : Training_Program Page : 7 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

5.1.1

AVEVA PDMS

USER DESIGN

Training number

OF_002

Duration

5 days

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4

Available languages

English, French

Required

Knowledge of plant design. Knowledge of Microsoft Windows and Office environment.

Intended for

All office personnel: Technician / Engineer

Training objective

⬧ ⬧ ⬧

Master the overall structure of the software (modules, GUI, hierarchy organization). Manipulate the 3D model elements, and understand their functions. Master the modules: Equipment, Steelwork, walls and floors, Piping, HVAC, and Cable Tray.

Day 1 : Overview of PDMS software and associated tools Description of the PDMS hierarchy, graphics manipulation, elements positioning and orientation, measuring distance and angle, attributes, screenshots and then introduction to the Model Editor. Day 2 : Equipment application Modeling primitives and equipment. Representation and obstruction levels. Copying elements using Datals, Finding and editing elements using lists and Search tools.

Schedule

Technical Means

Pedagogical Means Trainer

Day 3 : Structure (beams & Columns – Panels & Plates – Walls & Floors – Access, Stairs & Ladders) Steel structure design. Creating civil engineering elements. Creating stairs and handrails. Day 4 : Piping application Pipeline Design. Day 5 : HVAC and Cable Tray application Creating simple HVAC. Creating simple Cable tray. Using the Clasher. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies ⬧

The training will be led by one of Orinox’s Experts for AVEVA PDMS

⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Monitoring and Evaluation

⬧

Contact

Angélique Haubois

Rates

Orinox office : 2500 € (per person) On-site : Call for pricing (minimum of 4 trainees)

⬧

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 8 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA PDMS

USER DRAFT

Training number

OF_004

Duration

5 days

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4

Available languages

English, French

Recommendation

10 days training is recommended. (USER DESIGN + USER DRAFT).

Required

Knowledge of plant design. Knowledge of Microsoft Windows and Office environment. Completed the training session « AVEVA PDMS- USER DESIGN».

Intended for

All office personnel: Technician / Engineer

Training objective

⬧ ⬧

Understand the functions of the drawing modules and the extraction possibilities. Extract data from the 3D model and usage the reporting tool.

Day 1 : Data consistency Using the Data Consistency tool. Using attachments and isometric previews. Day 2 : Isodraft module Creating Isometric using the Isodraft module.

Duration and content

Day 3 : Reports and Draft introduction Material lists extractions using Report. Draft introduction. Day 4 : Draft module Creating drawings with orthogonal views, isometric views and section views. Creating quotations. Day 5 : Draft module Creating labels, Auto-tagging, update drawings

Pedagogical Means

⬧ ⬧ ⬧

A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies

Trainer

⬧

The training will be led by one of Orinox’s Experts for AVEVA PDMS

⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Technical Means

⬧ ⬧ ⬧

Monitoring and Evaluation

⬧

Contact

Angélique Haubois

Rates

Orinox office : 2500 € (per person) On-site : Call for pricing (minimum of 4 trainees)

⬧

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 9 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA PDMS

ADVANCE USER*

Training number

OF_003

Duration

3 days

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4 / AVEVA E3D

Available languages

English, French

Required

Knowledge of plant design. Knowledge of Microsoft Windows and Office environment. Completed the training « AVEVA PDMS - USER DESIGN».

Intended for

All office personnel: Technician / Engineer

Training objective

Choice 1: Master Pipework module and associated tools: Slope, MTO, Report, Mass and gravity center, Highlighting, Spooling. Choice 2: Master Structure and Wall & Floor module: Walls and floors with fittings, Screed, Slope. Day 1: Mastering slopes and catalog issues (weld, cut elbow...); Report (MTO, Weight). Day 2: Pipe spooling.

Duration and content

Day 3: Highlighting, Isodraft and Draft. Day 1: Wall & Floor definition with their different fittings. Day 2: Creating screed with slopes. Day 3: Crating Draft and note the different representation issues.

Technical Means

⬧ ⬧ ⬧

A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies

Pedagogical Means

⬧ ⬧ ⬧

Trainer

The training will be led by one of Orinox’s Experts for AVEVA PDMS ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Monitoring and Evaluation

⬧

Contacts

Angélique Haubois

Rates

Orinox office : 1500€ (per person) On-site : Call for pricing (minimum of 4 trainees)

⬧

Email : [email protected]

+33 (0)2 40 07 23 40

* 2 choices are available: 1 – Advance piping training. 2 – Advance structure and civil engineering training.

Auteur : Emmanuel Morvan

Date : 11/04/2019

Réf. : Training_Program Page : 10 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA E3D

USER MODEL

Training number

OF_22

Duration

5 days

Available version

AVEVA E3D

Available languages

English, French

Recommendation

10 days training is recommended. (USER MODEL + USER DRAW).

Required

Knowledge of plant design. Knowledge of Microsoft Windows and Office environment.

Intended for

All office personnel: Technician / Engineer

Training objective

Duration and content

⬧ ⬧ ⬧

Master the overall structure of the software (modules, GUI, hierarchy organization). Ability to manipulate the 3D model elements, and understand their functions. Master the modules: Equipment, Steelwork, walls and floors, Piping, HVAC, and Cable Tray and Laser Modeler.

Day 1 Overview of E3D software and associated tools Description of the E3D hierarchy, graphics manipulation, elements positioning and orientation, measuring a distance and an angle, attributes and pseudo-attributes, screenshot, introduction to the Model Editor. Day 2 : Equipment application Modeling primitives and equipment. Representation and obstruction levels. Copying elements using Datals. Finding and editing elements using lists and Search tools. Day 3 : Structures application (beams & Columns – Panels & Plates – Walls & Floors – Access, Stairs & Ladders) Designing steel structures. Creating civil engineering elements. Creating stairs and handrails. Day 4 : Piping application Designing Pipelines.

Technical Means

Pedagogical Means Trainer

Day 5 : HVAC Cable Tray application and Laser Modeler Creating simple HVAC. Creating simple Cable tray. Using the Clasher. Importing and using Point cloud. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA E3D

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. ⬧ A training attestation will be delivered at the end of the training specifying the level of Monitoring and Evaluation knowledge acquired by the trainee. ⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer. Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40 Contacts ⬧

Rates

Orinox office : 2500 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Date : 11/04/2019

Réf. : Training_Program Page : 11 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA E3D

USER DRAW

Training number

OF_23

Duration

5 days

Available version

AVEVA E3D

Available languages

English, French

Recommendation

10 days training is recommended. (USER MODEL + USER DRAW).

Required

Knowledge of plant design. Knowledge of Microsoft Windows and Office environment. Completed the training « AVEVA E3D- USER MODEL».

Intended for

All office personnel: Technician / Engineer

Training objective

⬧ ⬧

Duration and content

Technical Means

Pedagogical Means Trainer

Day 1 : Data consistency Using the Data Consistency tool. Using attachments and isometric previews. Day 2 : Isodraft module Creating Isometrics using the Isodraft module. Day 3 : Reports and Draft introduction Creating material lists using Report. Draft introduction. Day 4 : Draft module Creating drawings (orthogonal views, isometric views and section views). Creating quotations. Day 5 : Draft module Creating Labels, Autotagging, update drawings ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA E3D ⬧

Monitoring and Evaluation

Understand the functioning of the drawing module and the extraction possibilities. Extract data from the 3D model and using the reporting tool.

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 2500 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 12 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA

DIAGRAMS USER

Training number

OF_009

Duration

3 days

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4

Available languages

English, French

Required

Knowledge of plant design. Knowledge of Microsoft Windows and Office environment.

Intended for

All office personnel: Technician / Engineer

Training objective

To be able to : ⬧ Create P&ID using Diagrams module. ⬧ Create pipeline list (Report tool).

Duration and content

Technical Means

Pedagogical Means Trainer

Day 1 : Diagrams module overview. Creating P&ID using a template. Title block modification using attributes. Drawing format modification. Creating equipment and pipelines. Day 2 : Creating actuator and instrumentation. Creating P&ID connectors. Using Area. Adding P&ID annotations. Day 3 : Using Auto Formatting Rules, and self-check Search. Creating pipeline list. Modification of pipeline specification. Replacing symbols. Copying pipe elements, and entire P&ID. Schematic Model Viewer. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA DIAGRAMS ⬧

Monitoring and Evaluation

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 1500 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 13 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA E3D

UPGRADE E3D2.1

Training number

OF_024

Duration

3 days

Available version

AVEVA E3D 2.1

Available languages

English, French

Required

Knowledge of plant design. Knowledge of Microsoft Windows and Office environment. Knowledge of AVEVA PDMS or E3D1.1

Intended for

All office personnel: Technician / Engineer

Training objective

The goal of this course is to train an advanced PDMS 12.1 or E3D1.1 user to Everything3D 2.1 new features: new graphic user interface, new graphic engine, new 3D modeling process, new 2D drafting module DRAW.

Duration and content

Technical Means

Pedagogical Means Trainer

Monitoring and Evaluation

Day 1 : Overall software presentation, Equipment and Structural applications. Introduction of the new interface and new designing tools, primitive and equipment modeling, steel frame modeling. Day 2 : Piping application & SLH modeler, stairs and handrail creation, piping design, use of collections. Day 3 : 2D drafting with DRAW, interface presentation, sheet and view creation ; drawlist handling, dimension and annotation of the drawings ; revisionning and 2d Drawing exports. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA DIAGRAMS ⬧ Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. ⬧ A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. ⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 1500 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 14 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA

SCHEMATIC 3D INTEGRATOR USER

Training number

OF_011

Duration

2 days

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4

Available languages

English, French

Required

Knowledge of plant design. Knowledge of Microsoft Windows and Office environment. Knowledge of PDMS software or have completed the training « AVEVA PDMS - USER DESIGN » and « AVEVA PDMS-USER DRAFT ». Completed the training «AVEVA-USER DIAGRAMS ».

Intended for

All office personnel: Technician / Engineer

Training objective

To be able to: ⬧ Understand the functioning of Schematic 3D integrator. ⬧ Compare P&ID’s. ⬧ Compare and link pipelines and equipment. ⬧ Check data consistency between the 3D models and P&ID’s. ⬧ Build missing pipelines. ⬧ Administration of Schematic 3D Integrator.

Duration and content

Technical Means

Pedagogical Means Trainer

Day 1 : Schematic 3D integrator overview. Making P&ID’s available for 3D. Diagrams Viewer functionalities. Using and setting the Main Table. Compare 2 P&ID’s. Using the Link tool. Day 2 : Compare and link pipelines and equipment (COMPARE & LINK). Building missing pipelines and equipment (BUILD and Pipe Router). Administrating Schematic 3D Integrator. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA SCHEMATIC 3D INTEGRATOR ⬧

Monitoring and Evaluation

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 1000 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 15 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA

USER MDS

Training number

OF_019

Duration

2 days

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4

Available languages

English, French

Required

Knowledge of the Microsoft Windows and Office environment. Knowledge of the plant design and support. Have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-DRAFT».

Intended for

All office personnel: Technician / Engineer

Training objective

To be able to : ⬧ Modeling pipe supports, HVAC, and Cable tray.

Duration and content

Technical Means

Pedagogical Means Trainer

Day 1 : MDS overview. Understanding and using the “MDS Framework”. Creating supports (hangers, guide, HVAC and Cable Tray supports…). Day 2 : Isometrics production. Creating Reports. Creating support drawing using Draft module. Implementing on a plant design. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA MDS ⬧

Monitoring and Evaluation

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 1000 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 16 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA

ADMIN PROJECT

Training number

OF_006

Duration

2 days

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4

Available languages

English, French

Required

Knowledge of the plant design. Knowledge of the Microsoft Windows and Office environment. Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-USER DRAFT».

Intended for

All office personnel: Technician / Engineer

Training objective

⬧ ⬧

Duration and content

Technical Means

Install the software and modify the standard configuration files. Master the management and operations on databases.

Day 1 : Creating a new project Installing PDMS and creating a new project by modifying the standard configurations. Creating Teams and Users. Creating and managing databases. Creating and managing Multi Databases. Day 2 : Common administrative actions on a PDMS project Deleting ghost users. Identifying a particular session (STAMP). Back in a previous session (BACKTRACK). Deleting History project (MERGE). Control the database status (DICE). Database reconfiguration (RECON). Creating color rules in Design module and managing inter-DBs macro. ⬧ ⬧ ⬧

A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies

Pedagogical Means

⬧ ⬧ ⬧

Trainer

The training will be led by one of Orinox’s Experts for AVEVA PDMS ⬧

Monitoring and Evaluation

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 1000 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 17 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA

ADMIN DRAFT

Training number

OF_057

Duration

2 days

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4

Available languages

English, French

Required

Knowledge of the plant design. Knowledge of the Microsoft Windows and Office environment. Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-USER DRAFT». « AVEVA PDMS-ADMIN PROJECT ».

Intended for

All office personnel: Technician / Engineer

Training objective

⬧ ⬧

Duration and content

Allow to configure drawings using the software rules to adapt it to a project. Libraries administration: Labels, Styles, Representations and tags rules.

Day 1 : Defaults setting naming rules, Backing Sheet, 2D symbol, Label Library, Style Library, Drawlist, Tag Rule Day 2 : Autotagging rules, Plotting options, True Font.

Technical Means

⬧ ⬧ ⬧

A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies

Pedagogical Means

⬧ ⬧ ⬧

Trainer

The training will be led by one of Orinox’s Experts for AVEVA PDMS ⬧

Monitoring and Evaluation

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 1000 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Email : [email protected]

+33 (0)2 40 07 23 40

.

Auteur : Emmanuel Morvan

Date : 11/04/2019

Réf. : Training_Program Page : 18 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA

ADMIN ISODRAFT

Training number

OF_058

Duration

1 day

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4

Available languages

English, French

Required

Knowledge of the plant design. Knowledge of the Microsoft Windows and Office environment. Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-USER DRAFT» and « AVEVA PDMS-ADMIN PROJECT».

Intended for

All office personnel: Technician / Engineer

Training objective

⬧

Duration and content

Day 1 : Reminding catalogs connections, ISODRAFT Reference Manual, Define a template, 2D symbol, Backing sheet, UDAs defining for revisions management, Setting in Isodraft interface then in the text file.

Technical Means

⬧ ⬧ ⬧

Set the parameters to enable the isometric output.

A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies

Pedagogical Means

⬧ ⬧ ⬧

Trainer

The training will be led by one of Orinox’s Experts for AVEVA PDMS ⬧

Monitoring and Evaluation

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 500 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 19 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA

ADMIN DIAGRAMS

Training number

OF_010

Duration

2 days

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4

Available languages

English

Required

Knowledge of the plant design. Knowledge of the Microsoft Windows and Office environment. Knowledge of PDMS software or Have completed the training « AVEVA ADMIN PROJECT ». Have completed the training «AVEVA-USER DIAGRAMS ».

Intended for

All office personnel: Technician / Engineer

Training objective

To be able to : ⬧ Administrate Diagrams project. ⬧ Set Diagrams options. ⬧ Create and modify new symbols. ⬧ Establish Autonamming rules. ⬧ Create and manage Formatting Rules.

Duration and content

Day 1 : Introduction to Diagrams administration (environment overview and Diagrams databases). Creating and administrating Diagrams project. Creating hierarchy. Creating Shapes and Stencils. Day 2 : The options and common functions. The utilities.

Technical Means

⬧ ⬧ ⬧

A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies

Pedagogical Means

⬧ ⬧ ⬧

Trainer

The training will be led by one of Orinox’s Experts for AVEVA DIAGRAMS ⬧

Monitoring and Evaluation

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 1000 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 20 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA

ADMIN ENGINEERING

Training number

OF_013

Duration

3 days

Available version

AVEVA PDMS V12.1SP4

Available languages

English, French

Required

Knowledge of the Microsoft Windows and Office environment. Have completed the training « AVEVA PDMS-ADMIN PROJECT ». Have completed the training « AVEVA-ENGINEERING ».

Intended for

All office personnel: Technician / Engineer

Training objective

Duration and content

Technical Means

Pedagogical Means Trainer

To be able to : ⬧ Create a Tags project. ⬧ Create UDETs and UDAs. ⬧ Use the Distributed attributes. ⬧ Create a Database Views. ⬧ Use and configure the Compare Update function. ⬧ Create the Autonaming rules. ⬧ Configure the Datasheets. Day 1 : Tool overview. Creating a Tags project. Creating an equipment items and pielines. Creating a DBVIEWS. Day 2 : Creating a Distributes attributes. Implementation of a Compare Update. Creating the Autonaming rules. Configuring a Rule Set. Workflow implementation. Day 3 : Datasheet configuration. Cleaning the project. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA ENGINEERING ⬧

Monitoring and Evaluation

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 1500 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 21 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA

ADMIN MDS

Training number

OF_020

Duration

2 days

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4

Available languages

English, French

Required

Knowledge of the Microsoft Windows and Office environment. Knowledge of the plant design and du supportage. Have completed the training « AVEVA-USER MDS ».

Intended for

All office personnel: Technician / Engineer

Training objective

To be able to : ⬧ Create and set a AVEVA MDS environment.

Duration and content

Technical Means

Day 1 : AVEVA MDS overview and installation. Catalogue overview and projet creation. Using the Defaults base and project configuration. Day 2 : Creating a primary and secondary support. Draft administration. Other administration actions. ⬧ ⬧ ⬧

A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies

Pedagogical Means

⬧ ⬧ ⬧

Trainer

The training will be led by one of Orinox’s Experts for AVEVA MDS ⬧

Monitoring and Evaluation

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 1000 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 22 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA

CATALOGUE PIPING

Training number

OF_005

Duration

3 days

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4

Available languages

English, French

Required

Knowledge of the plant design. Knowledge of the Microsoft Windows and Office environment. Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-USER DRAFT».

Intended for

All office personnel: Technician / Engineer

Training objective

⬧ ⬧ ⬧

Duration and content

Technical Means

Pedagogical Means Trainer

Day 1 : Paragon overview and creation of connection tables Overview and organization of catalog databases. Creating piping components. Creating components text and designation. Creating connection tables. Day 2 : Specifications and Propcon module Creating Component Families (GPART). Creating pipe and tubing specifications. Creating and manage properties (via Propcon module). Day 3 : Management bolts Creating an adjustable valve. Creating bolting components and bolting tables. Creating bolting specifications. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA PARAGON ⬧

Monitoring and Evaluation

Know the databases linked to the catalog. Create plant design catalog items Ensure the validity of a catalog.

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 1500 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 23 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA

ENGINEERING USER

Training number

OF_012

Duration

1 day

Available version

AVEVA PDMS V12.1SP4

Available languages

English, French

Required

Knowledge of the Microsoft Windows and Office environment. Have completed the training « AVEVA ADMIN PROJECT»

Intended for

All office personnel: Technician / Engineer

Training objective

Duration and content

Technical Means

Pedagogical Means Trainer

To be able to : -Create and edit tags elements. -Create and manage lists. -Make Import-Exports using Excel. -Create and use Datasheets. Day 1 : Introduction to the tool. Creating and managing lists. Using additional functions of tags. Creating and managing Datasheets. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA ENGINEERING ⬧

Monitoring and Evaluation

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 500 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 24 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

AVEVA

REVIEW

Training number

OF_018

Duration

1 day

Available version

AVEVA Review 12

Available languages

English, French

Required

Knowledge of the Microsoft Windows and Office environment. Knowledge of the plant design. Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-DRAFT».

Intended for

All office personnel: Technician / Engineer

Training objective

To be able to : ⬧ Create and prepare a review model using AVEVA Review.

Duration and content

Technical Means

Pedagogical Means Trainer

Day 1 : Export Methods of an AVEVA PDMS model. Using Review (manipulation, lighting management, textures management, creating views, creating animations). PDF 3D export. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA REVIEW ⬧

Monitoring and Evaluation

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office : 500 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 25 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979

LANGUAGE PML 1&2 Training number

OF_008

Duration

4 days

Available version

AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4

Available languages

English, French

Required

Knowledge of the Microsoft Windows and Office environment. Knowledge of PDMS software or have completed the training « AVEVA PDMS - USER DESIGN » and « AVEVA PDMS-USER DRAFT». Have some knowledge in programming.

Intended for

All office personnel: Technician / Engineer

Training objective

To be able to : ⬧ Develop macro commands to automate repetitive tasks in PDMS

Duration and content

Technical Means

Pedagogical Means Trainer

Day 1 : Macros overview (simple macros, macros with simple settings, programmable macros). Variable types (String, Real, Array ...). The conditions (If, comparator, Match wild…). Error management. Using loops. Using PML1 and PML2. Day 2 : Using loops. Using PML1 and PML2. Functions, arguments and referrals. Day 3: Creating objects. Creating diff. Day 4: Creating dialog boxes (Forms). Communicate with the Windows environment. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for the PML language ⬧

Monitoring and Evaluation

⬧ ⬧

Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.

Contacts

Angélique Haubois

Rates

Orinox office: 2000 € (per person) On-site : Call for pricing (minimum of 4 trainees)

Auteur : Emmanuel Morvan

Email : [email protected]

+33 (0)2 40 07 23 40

Date : 11/04/2019

Réf. : Training_Program Page : 26 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979