33 2 1MB
Training Program AVEVA PLANT
ORINOX, Enhance your Digital Asset
OVERVIEW ORINOX is a “global” software consulting, Plant Design and Engineering firm specializing in the digitalization of physical assets using the AVEVA suite of products. We operate across many sectors including oil & gas, nuclear, energy, chemical, pharmaceutical, and food processing. AVEVA is the global leader in plant, power and naval engineering solutions. It chose to partner with Orinox as a Registered AVEVA Global Services Provider. This partnership will allow a bigger unit with multidiscipline knowledge across many industry sectors such as Plant Design and Engineering business functions. We have designed training programs for a wide range of the AVEVA suite software’s and for multiple designing skills included but not limited to (PDMS, E3D, Diagrams, P&ID, and Engineering). Our beginner courses provide a foundation for best practices, while our advanced courses are used to develop proficiency and competency with the corresponding modules (Advanced User, Administration, and Catalogue). Our training sessions offer shortcuts and "best practices" for AVEVA IE&D based design and data management. Manuals and training guides may be adapted for specific customer needs upon request. Our expert training instructors have years of experience in plant and piping design, structural, civil engineering, and mechanical design. They encounter the same challenges as our EPC and OwnerOperator customers, which gives them a unique perspective to keep all training materials both current and relevant. Orinox offers training sessions worldwide, both in-house and at client offices. Current training sessions have the capacity to train 1 to 6 people simultaneously per session, depending on the ability level of participants and the requested content. We offer fast response times, so sessions may be held with very little delay throughout the year.
AVEVA PDMS
AVEVA Diagrams
AVEVA E3D
AVEVA Engineering
Auteur : Emmanuel Morvan
Date : 11/04/2019
Réf. : Training_Program Page : 2 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
TRAINING CENTERS HOUSTON, TX-UNITED STATES
CHATEAUBRIANT-FRANCE
LYON-FRANCE
Auteur : Emmanuel Morvan
PARIS-FRANCE
KUALA LUMPUR-MALAYSIA
Date : 11/04/2019
Réf. : Training_Program Page : 3 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
TRAINING APPROACH Trainees will be immersed in realistic and engaging training exercises that replicate the design process across multiple sector: Oil & Gas, Nuclear, Energy, Chemical, Environmental, Pharmaceutical, and Food Processing.
3.1.
Resources
Dedicated Workspace available for training sessions. Conference rooms and collaboration areas will be available for use.
Training supports including manuals and exercises are given to each trainee upon arrival. A complementary USB Flash Drive key will also be provided; the key contains the training supports in digital format, as well as some utilities such as "freeware" and macros for use in the AVEVA Software.
3.2.
Course content
Different types of interactive courses, exercises and actual cases drawn from different industrial fields. All work will be supervised; constant monitoring will allow the instructor to verify the correct progression of each trainee.
3.3.
Means of Evaluation
Following the various practical sections and exercises, a course certificate will be given out to each trainee upon completion of the training sessions.
Auteur : Emmanuel Morvan
Date : 11/04/2019
Réf. : Training_Program Page : 4 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
LOCATIONS AND TIMES In our offices or on customer site.
Houston, Texas
9900 Westpark Drive, Suit 307, Houston,TX 77063 +1 (346)240-3901
Châteaubriant,France
3 avenue du Bataillon Carmagnole liberté Bâtiment K1 2eme étage - 69120 VAULX EN VELIN +33 (0) 6 28 43 70 58
Lyon, France
213, Rue de Gerland Bât B4 69007 LYON +33 (0) 9 51 30 13 97
Paris, France
9/11 Allée de l'Arche 92671 COURBEVOIE +33 (0) 1 49 97 15 79
Munich, Germany
Landsbergerstrasse 155, 80687 Muenchen Germany +49 176 24 03 21 34
Calgary, Canada
17th Avenue SW, 4th floor Calgary, Alberta, T2T 0A4, Canada +1 (587)223-2057
Kuala Lumpur, Malaysia
Suite 2201-2203, 22nd Floor Plaza See Hoy Chan Jalan Raja Chulan 50200 Kuala Lumpur - MALAYSIA +33 240 072 340
Auteur : Emmanuel Morvan
Date : 11/04/2019
Réf. : Training_Program Page : 5 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
TRAINING PROGRAM
Training program AVEVA PLANT
Auteur : Emmanuel Morvan
Date : 11/04/2019
Réf. : Training_Program Page : 6 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
TRAINING FOR AVEVA TOOLS USER
ADMIN
MANAGE
Auteur : Emmanuel Morvan
AVEVA PDMS USER DESIGN
Page 8
AVEVA PDMS USER DRAFT
Page 9
AVEVA PDMS ADVANCE USER
Page 10
AVEVA E3D USER MODEL
Page 11
AVEVA E3D USER DRAW
Page 12
AVEVA DIAGRAMS USER
Page 13
AVEVA E3D UPGRADE E3D2.1
Page 14
AVEVA SCHEMATIC 3D INTEGRATOR USER
Page 15
AVEVA USER MDS
Page 16
AVEVA ADMIN PROJECT
Page 17
AVEVA ADMIN DRAFT
Page 18
AVEVA ADMIN ISODRAFT
Page 19
AVEVA ADMIN DIAGRAMS
Page 20
AVEVA ADMIN ENGINEERING
Page 21
AVEVA ADMIN MDS
Page 22
AVEVA CATALOGUE PIPING
Page 23
AVEVA ENGINEERING USER
Page 24
AVEVA REVIEW
Page 25
LANGUAGE PML 1 & 2
Page 26
Date : 11/04/2019
Réf. : Training_Program Page : 7 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
5.1.1
AVEVA PDMS
USER DESIGN
Training number
OF_002
Duration
5 days
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages
English, French
Required
Knowledge of plant design. Knowledge of Microsoft Windows and Office environment.
Intended for
All office personnel: Technician / Engineer
Training objective
⬧ ⬧ ⬧
Master the overall structure of the software (modules, GUI, hierarchy organization). Manipulate the 3D model elements, and understand their functions. Master the modules: Equipment, Steelwork, walls and floors, Piping, HVAC, and Cable Tray.
Day 1 : Overview of PDMS software and associated tools Description of the PDMS hierarchy, graphics manipulation, elements positioning and orientation, measuring distance and angle, attributes, screenshots and then introduction to the Model Editor. Day 2 : Equipment application Modeling primitives and equipment. Representation and obstruction levels. Copying elements using Datals, Finding and editing elements using lists and Search tools.
Schedule
Technical Means
Pedagogical Means Trainer
Day 3 : Structure (beams & Columns – Panels & Plates – Walls & Floors – Access, Stairs & Ladders) Steel structure design. Creating civil engineering elements. Creating stairs and handrails. Day 4 : Piping application Pipeline Design. Day 5 : HVAC and Cable Tray application Creating simple HVAC. Creating simple Cable tray. Using the Clasher. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies ⬧
The training will be led by one of Orinox’s Experts for AVEVA PDMS
⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Monitoring and Evaluation
⬧
Contact
Angélique Haubois
Rates
Orinox office : 2500 € (per person) On-site : Call for pricing (minimum of 4 trainees)
⬧
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 8 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA PDMS
USER DRAFT
Training number
OF_004
Duration
5 days
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages
English, French
Recommendation
10 days training is recommended. (USER DESIGN + USER DRAFT).
Required
Knowledge of plant design. Knowledge of Microsoft Windows and Office environment. Completed the training session « AVEVA PDMS- USER DESIGN».
Intended for
All office personnel: Technician / Engineer
Training objective
⬧ ⬧
Understand the functions of the drawing modules and the extraction possibilities. Extract data from the 3D model and usage the reporting tool.
Day 1 : Data consistency Using the Data Consistency tool. Using attachments and isometric previews. Day 2 : Isodraft module Creating Isometric using the Isodraft module.
Duration and content
Day 3 : Reports and Draft introduction Material lists extractions using Report. Draft introduction. Day 4 : Draft module Creating drawings with orthogonal views, isometric views and section views. Creating quotations. Day 5 : Draft module Creating labels, Auto-tagging, update drawings
Pedagogical Means
⬧ ⬧ ⬧
A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies
Trainer
⬧
The training will be led by one of Orinox’s Experts for AVEVA PDMS
⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Technical Means
⬧ ⬧ ⬧
Monitoring and Evaluation
⬧
Contact
Angélique Haubois
Rates
Orinox office : 2500 € (per person) On-site : Call for pricing (minimum of 4 trainees)
⬧
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 9 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA PDMS
ADVANCE USER*
Training number
OF_003
Duration
3 days
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4 / AVEVA E3D
Available languages
English, French
Required
Knowledge of plant design. Knowledge of Microsoft Windows and Office environment. Completed the training « AVEVA PDMS - USER DESIGN».
Intended for
All office personnel: Technician / Engineer
Training objective
Choice 1: Master Pipework module and associated tools: Slope, MTO, Report, Mass and gravity center, Highlighting, Spooling. Choice 2: Master Structure and Wall & Floor module: Walls and floors with fittings, Screed, Slope. Day 1: Mastering slopes and catalog issues (weld, cut elbow...); Report (MTO, Weight). Day 2: Pipe spooling.
Duration and content
Day 3: Highlighting, Isodraft and Draft. Day 1: Wall & Floor definition with their different fittings. Day 2: Creating screed with slopes. Day 3: Crating Draft and note the different representation issues.
Technical Means
⬧ ⬧ ⬧
A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies
Pedagogical Means
⬧ ⬧ ⬧
Trainer
The training will be led by one of Orinox’s Experts for AVEVA PDMS ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Monitoring and Evaluation
⬧
Contacts
Angélique Haubois
Rates
Orinox office : 1500€ (per person) On-site : Call for pricing (minimum of 4 trainees)
⬧
Email : [email protected]
+33 (0)2 40 07 23 40
* 2 choices are available: 1 – Advance piping training. 2 – Advance structure and civil engineering training.
Auteur : Emmanuel Morvan
Date : 11/04/2019
Réf. : Training_Program Page : 10 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA E3D
USER MODEL
Training number
OF_22
Duration
5 days
Available version
AVEVA E3D
Available languages
English, French
Recommendation
10 days training is recommended. (USER MODEL + USER DRAW).
Required
Knowledge of plant design. Knowledge of Microsoft Windows and Office environment.
Intended for
All office personnel: Technician / Engineer
Training objective
Duration and content
⬧ ⬧ ⬧
Master the overall structure of the software (modules, GUI, hierarchy organization). Ability to manipulate the 3D model elements, and understand their functions. Master the modules: Equipment, Steelwork, walls and floors, Piping, HVAC, and Cable Tray and Laser Modeler.
Day 1 Overview of E3D software and associated tools Description of the E3D hierarchy, graphics manipulation, elements positioning and orientation, measuring a distance and an angle, attributes and pseudo-attributes, screenshot, introduction to the Model Editor. Day 2 : Equipment application Modeling primitives and equipment. Representation and obstruction levels. Copying elements using Datals. Finding and editing elements using lists and Search tools. Day 3 : Structures application (beams & Columns – Panels & Plates – Walls & Floors – Access, Stairs & Ladders) Designing steel structures. Creating civil engineering elements. Creating stairs and handrails. Day 4 : Piping application Designing Pipelines.
Technical Means
Pedagogical Means Trainer
Day 5 : HVAC Cable Tray application and Laser Modeler Creating simple HVAC. Creating simple Cable tray. Using the Clasher. Importing and using Point cloud. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA E3D
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. ⬧ A training attestation will be delivered at the end of the training specifying the level of Monitoring and Evaluation knowledge acquired by the trainee. ⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer. Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40 Contacts ⬧
Rates
Orinox office : 2500 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Date : 11/04/2019
Réf. : Training_Program Page : 11 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA E3D
USER DRAW
Training number
OF_23
Duration
5 days
Available version
AVEVA E3D
Available languages
English, French
Recommendation
10 days training is recommended. (USER MODEL + USER DRAW).
Required
Knowledge of plant design. Knowledge of Microsoft Windows and Office environment. Completed the training « AVEVA E3D- USER MODEL».
Intended for
All office personnel: Technician / Engineer
Training objective
⬧ ⬧
Duration and content
Technical Means
Pedagogical Means Trainer
Day 1 : Data consistency Using the Data Consistency tool. Using attachments and isometric previews. Day 2 : Isodraft module Creating Isometrics using the Isodraft module. Day 3 : Reports and Draft introduction Creating material lists using Report. Draft introduction. Day 4 : Draft module Creating drawings (orthogonal views, isometric views and section views). Creating quotations. Day 5 : Draft module Creating Labels, Autotagging, update drawings ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA E3D ⬧
Monitoring and Evaluation
Understand the functioning of the drawing module and the extraction possibilities. Extract data from the 3D model and using the reporting tool.
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 2500 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 12 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA
DIAGRAMS USER
Training number
OF_009
Duration
3 days
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages
English, French
Required
Knowledge of plant design. Knowledge of Microsoft Windows and Office environment.
Intended for
All office personnel: Technician / Engineer
Training objective
To be able to : ⬧ Create P&ID using Diagrams module. ⬧ Create pipeline list (Report tool).
Duration and content
Technical Means
Pedagogical Means Trainer
Day 1 : Diagrams module overview. Creating P&ID using a template. Title block modification using attributes. Drawing format modification. Creating equipment and pipelines. Day 2 : Creating actuator and instrumentation. Creating P&ID connectors. Using Area. Adding P&ID annotations. Day 3 : Using Auto Formatting Rules, and self-check Search. Creating pipeline list. Modification of pipeline specification. Replacing symbols. Copying pipe elements, and entire P&ID. Schematic Model Viewer. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA DIAGRAMS ⬧
Monitoring and Evaluation
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 1500 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 13 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA E3D
UPGRADE E3D2.1
Training number
OF_024
Duration
3 days
Available version
AVEVA E3D 2.1
Available languages
English, French
Required
Knowledge of plant design. Knowledge of Microsoft Windows and Office environment. Knowledge of AVEVA PDMS or E3D1.1
Intended for
All office personnel: Technician / Engineer
Training objective
The goal of this course is to train an advanced PDMS 12.1 or E3D1.1 user to Everything3D 2.1 new features: new graphic user interface, new graphic engine, new 3D modeling process, new 2D drafting module DRAW.
Duration and content
Technical Means
Pedagogical Means Trainer
Monitoring and Evaluation
Day 1 : Overall software presentation, Equipment and Structural applications. Introduction of the new interface and new designing tools, primitive and equipment modeling, steel frame modeling. Day 2 : Piping application & SLH modeler, stairs and handrail creation, piping design, use of collections. Day 3 : 2D drafting with DRAW, interface presentation, sheet and view creation ; drawlist handling, dimension and annotation of the drawings ; revisionning and 2d Drawing exports. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA DIAGRAMS ⬧ Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. ⬧ A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. ⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 1500 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 14 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA
SCHEMATIC 3D INTEGRATOR USER
Training number
OF_011
Duration
2 days
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages
English, French
Required
Knowledge of plant design. Knowledge of Microsoft Windows and Office environment. Knowledge of PDMS software or have completed the training « AVEVA PDMS - USER DESIGN » and « AVEVA PDMS-USER DRAFT ». Completed the training «AVEVA-USER DIAGRAMS ».
Intended for
All office personnel: Technician / Engineer
Training objective
To be able to: ⬧ Understand the functioning of Schematic 3D integrator. ⬧ Compare P&ID’s. ⬧ Compare and link pipelines and equipment. ⬧ Check data consistency between the 3D models and P&ID’s. ⬧ Build missing pipelines. ⬧ Administration of Schematic 3D Integrator.
Duration and content
Technical Means
Pedagogical Means Trainer
Day 1 : Schematic 3D integrator overview. Making P&ID’s available for 3D. Diagrams Viewer functionalities. Using and setting the Main Table. Compare 2 P&ID’s. Using the Link tool. Day 2 : Compare and link pipelines and equipment (COMPARE & LINK). Building missing pipelines and equipment (BUILD and Pipe Router). Administrating Schematic 3D Integrator. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA SCHEMATIC 3D INTEGRATOR ⬧
Monitoring and Evaluation
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 1000 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 15 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA
USER MDS
Training number
OF_019
Duration
2 days
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages
English, French
Required
Knowledge of the Microsoft Windows and Office environment. Knowledge of the plant design and support. Have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-DRAFT».
Intended for
All office personnel: Technician / Engineer
Training objective
To be able to : ⬧ Modeling pipe supports, HVAC, and Cable tray.
Duration and content
Technical Means
Pedagogical Means Trainer
Day 1 : MDS overview. Understanding and using the “MDS Framework”. Creating supports (hangers, guide, HVAC and Cable Tray supports…). Day 2 : Isometrics production. Creating Reports. Creating support drawing using Draft module. Implementing on a plant design. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA MDS ⬧
Monitoring and Evaluation
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 1000 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 16 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA
ADMIN PROJECT
Training number
OF_006
Duration
2 days
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages
English, French
Required
Knowledge of the plant design. Knowledge of the Microsoft Windows and Office environment. Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-USER DRAFT».
Intended for
All office personnel: Technician / Engineer
Training objective
⬧ ⬧
Duration and content
Technical Means
Install the software and modify the standard configuration files. Master the management and operations on databases.
Day 1 : Creating a new project Installing PDMS and creating a new project by modifying the standard configurations. Creating Teams and Users. Creating and managing databases. Creating and managing Multi Databases. Day 2 : Common administrative actions on a PDMS project Deleting ghost users. Identifying a particular session (STAMP). Back in a previous session (BACKTRACK). Deleting History project (MERGE). Control the database status (DICE). Database reconfiguration (RECON). Creating color rules in Design module and managing inter-DBs macro. ⬧ ⬧ ⬧
A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies
Pedagogical Means
⬧ ⬧ ⬧
Trainer
The training will be led by one of Orinox’s Experts for AVEVA PDMS ⬧
Monitoring and Evaluation
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 1000 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 17 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA
ADMIN DRAFT
Training number
OF_057
Duration
2 days
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages
English, French
Required
Knowledge of the plant design. Knowledge of the Microsoft Windows and Office environment. Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-USER DRAFT». « AVEVA PDMS-ADMIN PROJECT ».
Intended for
All office personnel: Technician / Engineer
Training objective
⬧ ⬧
Duration and content
Allow to configure drawings using the software rules to adapt it to a project. Libraries administration: Labels, Styles, Representations and tags rules.
Day 1 : Defaults setting naming rules, Backing Sheet, 2D symbol, Label Library, Style Library, Drawlist, Tag Rule Day 2 : Autotagging rules, Plotting options, True Font.
Technical Means
⬧ ⬧ ⬧
A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies
Pedagogical Means
⬧ ⬧ ⬧
Trainer
The training will be led by one of Orinox’s Experts for AVEVA PDMS ⬧
Monitoring and Evaluation
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 1000 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Email : [email protected]
+33 (0)2 40 07 23 40
.
Auteur : Emmanuel Morvan
Date : 11/04/2019
Réf. : Training_Program Page : 18 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA
ADMIN ISODRAFT
Training number
OF_058
Duration
1 day
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages
English, French
Required
Knowledge of the plant design. Knowledge of the Microsoft Windows and Office environment. Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-USER DRAFT» and « AVEVA PDMS-ADMIN PROJECT».
Intended for
All office personnel: Technician / Engineer
Training objective
⬧
Duration and content
Day 1 : Reminding catalogs connections, ISODRAFT Reference Manual, Define a template, 2D symbol, Backing sheet, UDAs defining for revisions management, Setting in Isodraft interface then in the text file.
Technical Means
⬧ ⬧ ⬧
Set the parameters to enable the isometric output.
A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies
Pedagogical Means
⬧ ⬧ ⬧
Trainer
The training will be led by one of Orinox’s Experts for AVEVA PDMS ⬧
Monitoring and Evaluation
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 500 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 19 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA
ADMIN DIAGRAMS
Training number
OF_010
Duration
2 days
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages
English
Required
Knowledge of the plant design. Knowledge of the Microsoft Windows and Office environment. Knowledge of PDMS software or Have completed the training « AVEVA ADMIN PROJECT ». Have completed the training «AVEVA-USER DIAGRAMS ».
Intended for
All office personnel: Technician / Engineer
Training objective
To be able to : ⬧ Administrate Diagrams project. ⬧ Set Diagrams options. ⬧ Create and modify new symbols. ⬧ Establish Autonamming rules. ⬧ Create and manage Formatting Rules.
Duration and content
Day 1 : Introduction to Diagrams administration (environment overview and Diagrams databases). Creating and administrating Diagrams project. Creating hierarchy. Creating Shapes and Stencils. Day 2 : The options and common functions. The utilities.
Technical Means
⬧ ⬧ ⬧
A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies
Pedagogical Means
⬧ ⬧ ⬧
Trainer
The training will be led by one of Orinox’s Experts for AVEVA DIAGRAMS ⬧
Monitoring and Evaluation
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 1000 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 20 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA
ADMIN ENGINEERING
Training number
OF_013
Duration
3 days
Available version
AVEVA PDMS V12.1SP4
Available languages
English, French
Required
Knowledge of the Microsoft Windows and Office environment. Have completed the training « AVEVA PDMS-ADMIN PROJECT ». Have completed the training « AVEVA-ENGINEERING ».
Intended for
All office personnel: Technician / Engineer
Training objective
Duration and content
Technical Means
Pedagogical Means Trainer
To be able to : ⬧ Create a Tags project. ⬧ Create UDETs and UDAs. ⬧ Use the Distributed attributes. ⬧ Create a Database Views. ⬧ Use and configure the Compare Update function. ⬧ Create the Autonaming rules. ⬧ Configure the Datasheets. Day 1 : Tool overview. Creating a Tags project. Creating an equipment items and pielines. Creating a DBVIEWS. Day 2 : Creating a Distributes attributes. Implementation of a Compare Update. Creating the Autonaming rules. Configuring a Rule Set. Workflow implementation. Day 3 : Datasheet configuration. Cleaning the project. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA ENGINEERING ⬧
Monitoring and Evaluation
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 1500 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 21 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA
ADMIN MDS
Training number
OF_020
Duration
2 days
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages
English, French
Required
Knowledge of the Microsoft Windows and Office environment. Knowledge of the plant design and du supportage. Have completed the training « AVEVA-USER MDS ».
Intended for
All office personnel: Technician / Engineer
Training objective
To be able to : ⬧ Create and set a AVEVA MDS environment.
Duration and content
Technical Means
Day 1 : AVEVA MDS overview and installation. Catalogue overview and projet creation. Using the Defaults base and project configuration. Day 2 : Creating a primary and secondary support. Draft administration. Other administration actions. ⬧ ⬧ ⬧
A multimedia room for the training Individual workstation with two screens Course material and practical implementation of the software in the form of practical assignments Theory lessons Practical exercises Real Case Studies
Pedagogical Means
⬧ ⬧ ⬧
Trainer
The training will be led by one of Orinox’s Experts for AVEVA MDS ⬧
Monitoring and Evaluation
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 1000 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 22 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA
CATALOGUE PIPING
Training number
OF_005
Duration
3 days
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages
English, French
Required
Knowledge of the plant design. Knowledge of the Microsoft Windows and Office environment. Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-USER DRAFT».
Intended for
All office personnel: Technician / Engineer
Training objective
⬧ ⬧ ⬧
Duration and content
Technical Means
Pedagogical Means Trainer
Day 1 : Paragon overview and creation of connection tables Overview and organization of catalog databases. Creating piping components. Creating components text and designation. Creating connection tables. Day 2 : Specifications and Propcon module Creating Component Families (GPART). Creating pipe and tubing specifications. Creating and manage properties (via Propcon module). Day 3 : Management bolts Creating an adjustable valve. Creating bolting components and bolting tables. Creating bolting specifications. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA PARAGON ⬧
Monitoring and Evaluation
Know the databases linked to the catalog. Create plant design catalog items Ensure the validity of a catalog.
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 1500 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 23 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA
ENGINEERING USER
Training number
OF_012
Duration
1 day
Available version
AVEVA PDMS V12.1SP4
Available languages
English, French
Required
Knowledge of the Microsoft Windows and Office environment. Have completed the training « AVEVA ADMIN PROJECT»
Intended for
All office personnel: Technician / Engineer
Training objective
Duration and content
Technical Means
Pedagogical Means Trainer
To be able to : -Create and edit tags elements. -Create and manage lists. -Make Import-Exports using Excel. -Create and use Datasheets. Day 1 : Introduction to the tool. Creating and managing lists. Using additional functions of tags. Creating and managing Datasheets. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA ENGINEERING ⬧
Monitoring and Evaluation
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 500 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 24 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA
REVIEW
Training number
OF_018
Duration
1 day
Available version
AVEVA Review 12
Available languages
English, French
Required
Knowledge of the Microsoft Windows and Office environment. Knowledge of the plant design. Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-DRAFT».
Intended for
All office personnel: Technician / Engineer
Training objective
To be able to : ⬧ Create and prepare a review model using AVEVA Review.
Duration and content
Technical Means
Pedagogical Means Trainer
Day 1 : Export Methods of an AVEVA PDMS model. Using Review (manipulation, lighting management, textures management, creating views, creating animations). PDF 3D export. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for AVEVA REVIEW ⬧
Monitoring and Evaluation
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office : 500 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 25 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
LANGUAGE PML 1&2 Training number
OF_008
Duration
4 days
Available version
AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages
English, French
Required
Knowledge of the Microsoft Windows and Office environment. Knowledge of PDMS software or have completed the training « AVEVA PDMS - USER DESIGN » and « AVEVA PDMS-USER DRAFT». Have some knowledge in programming.
Intended for
All office personnel: Technician / Engineer
Training objective
To be able to : ⬧ Develop macro commands to automate repetitive tasks in PDMS
Duration and content
Technical Means
Pedagogical Means Trainer
Day 1 : Macros overview (simple macros, macros with simple settings, programmable macros). Variable types (String, Real, Array ...). The conditions (If, comparator, Match wild…). Error management. Using loops. Using PML1 and PML2. Day 2 : Using loops. Using PML1 and PML2. Functions, arguments and referrals. Day 3: Creating objects. Creating diff. Day 4: Creating dialog boxes (Forms). Communicate with the Windows environment. ⬧ A multimedia room for the training ⬧ Individual workstation with two screens ⬧ Course material and practical implementation of the software in the form of practical assignments ⬧ Theory lessons ⬧ Practical exercises ⬧ Real Case Studies The training will be led by one of Orinox’s Experts for the PML language ⬧
Monitoring and Evaluation
⬧ ⬧
Regular follow-ups of progress and comprehension will be done during the training in the form of tests and multiple choice questions. A training attestation will be delivered at the end of the training specifying the level of knowledge acquired by the trainee. A daily attendance sheet will be signed by the trainees for half days, countersigned at the end of the training by the trainer.
Contacts
Angélique Haubois
Rates
Orinox office: 2000 € (per person) On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan
Email : [email protected]
+33 (0)2 40 07 23 40
Date : 11/04/2019
Réf. : Training_Program Page : 26 sur 26 SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected] SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979