Sulley & Mike: Pattern by Medaami [PDF]

Zitiervorschau

sulley & Mike pattern by Medaami

Hi there! Thank you for purchasing this pattern! :) This pattern is originally designed by Medaami and is for personal use only. DO NOT duplicate, sell or distribute this pattern in any sort of ways. However, you may sell the finished product in SMALL mass but please clearly credit Medaami as the pattern designer. Thanks for your understanding! Don't hesitate to DM me on instagram @medaami, or email to [email protected] if you have any questions or feedbacks. ***PLEASE NOTE THAT SOME COLORS OF THE PIECES ARE DIFFERENT DUE TO DIFFERENT LIGHTING*** Have fun! :)

2

DIFFICULTY

Beginner - Intermediate YOU'LL NEED:

- Any yarn in pastel turqouise, dark mint, light purple, white, dark gray, ivory, light green and black color - Crochet hook that matches the size of your yarn - A pair of safety eyes for Sulley (I use a 10mm one) - One safety eye for Mike (I use a 16mm one) - light blue, light green and white felt - Tapestry/yarn needle - Stitch marker - Scissors - Stuffing - A strand of wire (optional) - A hot glue gun (optional) SIZE

I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet hook. My Sulley turned out approximately 10cm (3.4") tall. ABBREVIATIONS

R = round/row ch = chain st(s) = stitch(es) sc = single crochet hdc = half double crochet inc = 2 sc in 1 st dec = 1 sc in 2 st

BLO = back loop only sk = skip sl st = slip stitch x(...) = repeat (...) times [...] = a total of [...] stitches on that round

3

sulley PATTERN eyes (make 2)

(white) R1: 4sc in magic ring [4] R2: inc x4 [8] Sl st, fasten off, leave a tail for sewing, or not leaving a tail and just glue them later. 1. Using light blue felt, cut out 2 small pieces. 2. Make holes in the middle of each piece, then insert your safety eyes. 3. Cut out each piece to form a circle slightly bigger than the safety eye. 4. Insert them to the white piece that we made before.

1

2

3

Belly

(white) R1: ch 6, (starting from the 2nd ch from hook) 5sc, turn to the other side and 5sc again, and now you’re working in rounds. [10] R2: (inc, sc) x5 [15] Sl st, fasten off and leave a tail for sewing.

4

HEAD

(pastel turquoise) R1: 6sc in magic ring [6] R2: inc x6 [12] R3: (inc, sc) x6 [18] R4: (inc, 2sc) x6 [24] R5: (inc, 3sc) x6 [30] R6: (inc, 4sc) x6 [36] R7: (inc, 5sc) x6 [42] R8-R14: sc around (7 rounds) [42] R15: (inc, 6sc) x6 [48] R16-R19: sc around (4 rounds) [48] R20: (dec, 6sc) x6 [42] R21: (dec, 5sc) x6 [36] R22: (dec, 4sc) x6 [30] Insert eyes and snap the washer in. I inserted them between R14-R15, and about 6sts apart. Stuff firmly. R23: (dec, 3sc) x6 [24] R24: (dec, 2sc) x6 [18] Sl st, fasten off, weave the tail in, add more stuffing if needed. body

(pastel turquoise) R1: 6sc in magic ring [6] R2: inc x6 [12] R3: (inc, sc) x6 [18] R4: (inc, 2sc) x6 [24] R5-R9: sc around (5 rounds) [24] R10: (dec, 2sc) x6 [18] R11: sc around [18] Sl st, fasten off, leave a tail for sewing and stuff firmly.

5

Arms (make 2)

(pastel turquoise) R1: 5sc in magic ring [5] R2: inc x5 [10] R3: sc around [10] R4: (dec, 3sc) x2 [8] R5-R6: sc around (2 rounds) [8] Sl st, fasten off, leave a tail for sewing and stuff lightly. legs (make 2) (pastel turquoise) R1: 6sc in magic ring [6] R2: inc x6 [12] R3: BLO, sc around [12] R4: sc around [12] R5: (dec, 4sc) x2 [10] R6: sc around [10] Sl st, fasten off, leave a tail for sewing and stuff firmly. Claws (make 2)

(dark gray) Crochet the claws on the front loop of R3 of the legs. - ch 2, (starting from the 2nd ch from hook) sc, sl st on the next loop. - sl st on the next loop, ch 2, (starting from the 2nd ch from hook) sc, sl st on the next loop. - sl st on the next loop, ch 2, (starting from the 2nd ch from hook) sc, sl st on the next loop. Fasten off and weave the tails in.

6

TAIL

(pastel turquoise) R1: 4sc in magic ring [4] R2: (sc, inc) x2 [6] R3: (2sc, inc) x2 [8] R4: (3sc, inc) x2 [10] R5-R6: sc in all sts (2 rounds) [10] R7: (4sc, inc) x2 [12] R8: (5sc, inc) x2 [14] Sl st, fasten off, leave a tail for sewing and stuff firmly. spikes

(dark gray) 1. ch 10 2. Starting from 2nd ch from hook, sl st, dc, then sl st in the same chain that you just dc. 3. Repeat step 2 two more times. 4. Fasten off and leave a tail for sewing. horns (make 2)

(ivory) R1: 4sc in magic ring [4] R2: (inc, sc) x2 [6] R3: sc around [6] R4: (inc, 2sc) x2 [8] R5: (inc, 3sc) x2 [10] R6: sc around [10] Sl st, fasten off, leave a tail for sewing and stuff lightly.

7

Nose

(dark mint) Work in rows, ch 1 and turn after each rows. R1: ch 4, (starting from the 2nd ch from hook) 3sc [3] R2: inc, sc, inc [5] Fasten off and leave a tail for sewing, or if you wanna glue them, weave the tails in. eyebrows (make 2)

(pastel turquoise) ch 8, starting from 2nd ch from hook, 7 hdc [7] Fasten off and leave a tail for sewing, or if you wanna glue them, weave the tails in. spots (make 3)

(light purple) R1: 3sc in magic ring [3] R2: inc x3 [6] Sl st, fasten off, leave a tail for sewing, or not leaving a tail and just glue them later.

assembly

I recommend to use ball point pins for assembly. This way will help you to keep the pieces in place and make it easier to do the sewing. I'm using a hot glue gun to attach some parts, but if you make this amigurumi for kids, I recommend to make it fully sewn.

8

1. Sew the body to the head. 2. Sew the belly onto the front body.

1

2

3. This step is optional, I inserted a wire through the upper part of the body for the arms. (Not recommended if you make this amigurumi for kids.) 4. Sew the arms to the sides of the upper body. 5. Sew the legs to the lower sides of the body. (If you wanna make it stand, just sew the legs on the bottom of the body.) 6. Sew the tail to the lower back side of the body.

4

5

6

9

7. Sew the spikes in the middle of the tail. 8. (optional, not recommended if you make this amigurumi for kids.) I inserted a strand of wire on each horns so I’ll be able to shape them. Then sew both horns on the sides of the upper head.

7

8

9. Sew/glue the spots onto the upper left arm, lower right arm, and lower back body. 10. Sew/glue the eyebrows and nose like so:

9 10 11. Embroider a long smile for the mouth 12. Cut out a small triangle and another smaller triangle for the teeth, then glue them on one side of the mouth.

11

12

10

And.. You’re done making Sulley amigurumi! Moving on to make Mike for your Sulley!

mike PATTERN

eyes

(white) R1: 5sc in magic ring [5] R2: inc x5 [10] R3: (inc, sc) x5 [15] R4: (inc, 2sc) x5 [20] R5: sc around [20] Sl st, fasten off, leave a tail for sewing, or not leaving a tail and just glue them later.

11

1. Using light green felt, cut out a square piece 2. Make a hole in the middle, then insert your safety eye. 3. Cut out the felt piece to form a circle slightly bigger than the safety eye. 4. Insert them to the white piece that we made before.

HEAD

(light green) R1: 6sc in magic ring [6] R2: inc x6 [12] R3: (inc, sc) x6 [18] R4: (inc, 2sc) x6 [24] R5: (inc, 3sc) x6 [30] R6: (inc, 4sc) x6 [36] R7-R11: sc around (5 rounds) [36] R12: (inc, 5sc) x6 [42] R13-R15: sc around (3 rounds) [42] R16: (dec, 5sc) x6 [36] R17: (dec, 4sc) x6 [30] Insert eyes and snap the washer in. I inserted them like so: Stuff firmly. R18: (dec, 3sc) x6 [24] R19: (dec, 2sc) x6 [18] Sl st, fasten off, weave the tail in, add more stuffing if needed.

12

Arms (make 2)

(light green) R1: 3sc in magic ring [3] R2: inc x3 [6] R3-R9: sc around (7 rounds) [6] Sl st, fasten off, leave a tail for sewing and stuff lightly. legs (make 2)

(light green) R1: 4sc in magic ring [4] R2: inc x4 [8] R3-R4: sc around (2 rounds) [8] R5: (dec, 2sc) x2 [6] insert stuffing. R6-R8: sc around (3 rounds) [6] Sl st, fasten off, leave a tail for sewing and stuff lightly. horns (make 2)

(ivory) R1: 4sc in magic ring [4] R2: (inc, sc) x2 [6] R3: sc around [6] R4: (inc, 2sc) x2 [8] Sl st, fasten off, leave a tail for sewing and stuff lightly.

13

assembly

I recommend to use ball point pins for assembly. This way will help you to keep the pieces in place and make it easier to do the sewing. I'm using a hot glue gun to attach some parts, but if you make this amigurumi for kids, I recommend to make it fully sewn. 1. Sew the arms on the side of the head.

2. Sew the legs below the head.

3. Sew the horns onto the top of the head.

14

And.. You’re done making Mike amigurumi!

I hope you had fun making them. Please leave a review and share pictures of your creations and tag me on instagram @medaami, I'd really appreciate it and I’d be really happy to see your creations! Questions or feedbacks? Feel free to DM me on instagram @medaami or email me at [email protected]

15

"PUSH IN" EFFECT

This step is optional, but I like to give the "push in" effect (or what they call it) to the eyes. 1) Tie a knot on the inner right eye. 2) Using a yarn/tapestry needle, bring the yarn inside and pull it out on the inner left eye. 3) Pull the yarn slightly to give that "push in" effect then tie a knot to secure it. Weave any tails in, and you're done once again! :)

16