Stickley Arranging Horns [PDF]

Zitiervorschau

JAZZ & ROCK & ROLL HORNS

A simple approach to arranging horns for your jazz or rock&roll band

FRED STICKLEY MUSIC

JAZZ & ROCK & ROLL HORNS I know there are many of you who would love to add horns to your band or original music, and would like a simple, straight forward approach. After looking around on the web for any infor mation or tutorials on writing for specifically a “horn section”, I found very little, and what I did find was in bits and pieces. Having a horn section in your rock, r&b, or jazz group can really enhance your music, and add to your live per for mance. How many times have I heard, “I love horns” when folks in the crowd see my trumpet and sax player setting up their gear. This tutorial will start with writing a 2 part arrangement for trumpet and tenor sax or flugelhorn and flute. We will then move on to 3 part writing for trumpet, tenor sax, and trombone, and eventually 4 and 5 part writing. As we move along, it will be necessary for us to get into a little more advanced har mony. We will also cover chart preparation. How to transpose for the different instruments and the best way to lay out your chart. In addition we will cover dynamic markings, articulations, DSs, Codas, and rehearsal marks. These are all very important elements so that your arrangement will get played properly without wasting precious rehearsal or studio time. Some knowledge of chords and har mony will be helpful and there are some websites out there that can help you with this. ABC studio, New York, NY

If you’re just starting out with reading and notating music, your horn players can also help you get through this hurdle. Most horn players are brought up reading music, and by working together you can make it happen. My goal is to keep these tutorials lean and to the point. We are going to only cover material that is necessary for you to accomplish your goal as a band leader or singer songwriter. My old teacher back in the day use to say, “it ain’t rocket science.” And he was right, It ain’t.



WRITING FOR 2 PART HORNS I currently have two horns in my jazz group, trumpet and tenor sax, and would like to start there. Writing for 2 horns is much different then writing for 3, 4, or 5 horns and not for the obvious reasons. In some respects larger groups are easier to write for depending on style. Your ideas for your arrangement will be deter mined by how many horns you are writing for. Before you start writing your arrangement, have your chord changes set on what you want. The chords for your song will dictate your voicings. You will first write the trumpet part since it is typically the top note of your voicing for most situations. When writing for any combination of brass or wind instruments you always want to voice from the top down. In many situations you will write for trumpet and tenor sax in octaves, particularly when the trumpet is playing in it’s higher register above the staff. If you were to write a 3rd interval specifically with the tenor sax, it will sound thin.

The Sean+Fred Show Sextet at Ivories Jazz Lounge, Portland OR 2013

As the trumpet line dips into the staff or it’s middle register, you then have opportunities to write a 3rd or 6th interval with the tenor sax. If your trumpet, for most of the arrangement is in the upper part of it’s range and you would like to use intervals, switch your sax to an alto or a soprano. Don’t forget that 4th and 5th intervals can be very nice and have a specific flavor and work well for both rock and jazz. Trumpet and tenor sax can sound really fat in the staff playing octaves or unison in the middle of their range. I heard a horn section that was trumpet, trombone, and baritone sax, and the trumpet never played out of the staff. With the bone and bari sax it sounded big and fat. High is not always better.



SUGAR

4ths

Octaves

4ths EXAMPLE #1. This is a 2 part intro with Trumpet and Tenor Sax for the tune “Sugar,” and is all over one chord, C7sus. With short burst, the trumpet in the staff, this is writen in octaves, thirds and fourths . A very stark idea that woks well with this tune. 52nd Street NYC, July 1948

GREEN DOLPHIN ST.

EXAMPLE #2. An arrangement I did for “Green Dolphin Street” using 5ths. Notice in the last 2 bars it breaks into octaves for the quick 8th notes. This arrangment plays at about 140 bpm.



GREEN DOLPHIN ST.

EXAMPLE #3. With quick 8ths and the trumpet above the staff, octaves work nicely. The last 2 bars could work in 6ths, but I decided on Octaves. Either idea would work. GREEN DOLPHIN ST.

EXAMPLE #4. This idea is per fect for octaves with the trumpet popping those double high C. This idea plays after the DS and fills around the vocal in the last A section. An idea like this creates excitement.

NOTE: you will find the audio companion to these example on the FSM website at: http://fredstickleymusic.com/music-tutorials/



SUGAR

EXAMPLE #5. A combination of octaves and intervals throughout this example of SUGAR with chord changes on every bar with the horns filing around the vocal.

Chicago Horns 2006



My trumpet player doubles on flugelhorn and my sax player doubles on flute. Flute and flugelhorn work well together and will give you a whole new color to use in your group. First I write out what my flute will play since it’s usually the top voice in this scenario and will write the flugelhorn under the flute in octaves or intervals. Since the flute and flugelhorn both have higher ranges than a tenor sax, you could write 3rd and 6th interval a lot higher in the staff. Also, prime unison and 3rds in the staff sound very nice with these 2 instruments. Try mixing your unisons and octaves with intervals. We’ve all heard this done many times where the horns play a line in octaves or unison and then at the end of the phrase they will play a held note which is then voiced in 3rds, a 6th or a 5th. Mixing things up like this is very effective and sounds fantastic with 4 and 5 horns bursting into a big fat voicing.

Lovely Day

EXAMPLE #6. Here’s an example of Flute and Flugel Horn on LOVELY DAY playing in prime unison.



WRITING FOR 3 PART HORNS Just adding an 3rd horn to your lineup opens up a whole new world of possibilities. You can now have triads instead of intervals, using closed and open voicing. You can divide the horn section into 2 groups, working your 2 tenor instruments against your trumpet, or, while one of you horns is soloing, the other two can comp in intervals.

The Tower of Power Saxes. Oregon Zoo, 2007

With 3 horns you can mix up your orchestration a number of ways if you start incorporating any of the r hythm section. Group your guitar or keyboard with one of your horns as one section and have your other 2 horns as the other section. Then have the 2 sections counter or play against each other. Don’t forget that all 3 horns don’t always have to be playing. Your 2 tenor instruments can be active while your trumpet is resting or tacit. With 3 horns there are some nice linear or contrapuntal ideas you can incorporate. This can be a little bit more involved and we’ll have some examples of that too. If you’re writing a jazz arrangement with extended har mony, as in, A9(+11) or A13, it can be more challenging with 3 horns than with 4 or 5. With 4 or 5 horns it’s obvious that you can cover more notes. This approach will be easier to show using examples.



THE ODD COUPLE

EXAMPLE #7. Three part writing with block or closed voicing for trumpet, tenor sax, and trombone. With the trumpet (the top voice) being in the staff, this works well with two tenor instruments playing the 2 lower voices. All three play the single note at the start of each phrase.

THE ODD COUPLE ending/coda

EXAMPLE #8. With 2 part writing for 3 horns you can put the treble line in prime unison or octaves with your trumpet and sax and the trombone playing the bass clef, or you could flip the sax and bone parts, depending on the sound you want.

Twilight Club 1956 Pensacola, Florida



3 Time Bluser, Elmer Bernstein

EXAMPLE #9. Three Time Blueser #1 This is an example of 3 voices that I transcribed from a big band album by composer, Elmer Bernstein. On his original version the treble line was played by trumpet and trombone and the bass clef was played by the tenor and baritone saxes. When I was putting my sextet book together for 3 horns and piano trio, I copied the orchestration of the original version with just one instrument on each note instead of the 4 or 5 in a typical big band. Currently we are doing this tune with only trumpet and sax so I had them play the treble line and the r hythm section plays the bass line. You can actually orchestrate this example a multiple of ways.

3 Time Bluser, cont

EXAMPLE #10. Here’s a bluesy thing in 3/4 play a slightly varied idea in the treble staff In the bass clef the trombone is playing a 1 section. For a different color you could flip and it would still work.

10

where the trumpet and sax with a little contrary motion. bar pattern with the r hythm the sax and trombone parts

Bluesette, Toots Thieleman

2 Passing - Cmin7 EXAMPLE #11. Bluesette for 3 horns. This example is a 3 part closed or block voicing. With the top note being the melody, you just voice down fallowing the intervals of the chord. Notice the melody notes, G & C on the 2nd beats of bars 1 & 2. They are not in a Bbmaj7 chord, but are in a Cmin7 chord, the 2 chord in the key of Bb major. Using the 2 minor chord for your voicing is known as a “2 Passing chord.”

Tom’s Tavern club at Gonzalez & Railroad St. Pensacola, Florida.1956.

11

WRITING FOR 4 & 5 PART HORNS

I think the most fun is writing for 4 and 5 parts. Maybe it’s because when I first learned how to do this, I wrote for 5 saxes with a piano trio. This would be a typical sax section in a Big Band. 2 altos, 2 tenors, and a baritone. One of the challenges in writing for 5 horns is to keep the lower instruments, in this case, the baritone sax, in a good part of it’s range. If you always wrote in a block or closed voicing, your section would start to sound thin as your top voice played higher. You’ll find that your voicing will open and close slightly through out the phrase. Let’s first talk about a closed or block voicing. Simply put, it’s voiced from the top (the melody) down without skipping any of the notes in the chord like we did in the 3 part example. With 5 parts the top and bottom voice will mostly be in octaves. So a Fmaj7 chord, with the melody being the A, the notes following would be, F, E, C and A again. Easy. EXAMPLE #12. Block or Closed voicing. All Of Me

12

You can open your voicing to various degrees. Depending on how high your top voice goes, will depend on how much you open the voicing. The smallest degree of “open” would be to drop the 2nd note from the top down an octave and your lowest instrument will then play this note. In this case our baritone sax. This technique is known as a “Drop 2” or “A” voicing. In bar 5 there is an “A” or “Drop 2” voicing. The Bb moves down an octave, and your bari sax will now blend much nicer. I did the same in bar 2 with the Cmin or the “2 passing chord,” dropping the G down an octave. At bar 8 I used what we call a “C Voicing.” Since they are ending the phrase with a held note, it’s an opportunity to open the voicing up with the lowest voice playing the root of the chord. Here we have a nice voicing of a Bb13 chord. A great, contemporary sound with the 5th intervals in the voicing. A good rule of thumb for good “voice-leading,” is when the melody is moving, make sure the lower instruments are moving as well and aren’t repeating notes. There are exceptions to this rule, as with most.

EXAMPLE #13. Five part voicing. Bluestte 2 Passing

“Drop 2”

“C Voicing”

13

This next technique is like the Drop 2, but now we are going to drop the 2nd and 4th notes from the top down an octave. This technique is known as a “Drop 2-4” or “B” voicing depending the school you went to. :) A third technique is a “C Voicing” or “Root Position.” These work well on a held note at the end of a phrase to give you a nice big open voicing with the root on the bottom. EXAMPLE #14 Drop 2-4 and C voicing.

Around For the Fall, by FS

# Drop 2 & 4

C or Open

EXAMPLE #15 Here is a quick review of our voicings simply laid out. Block or Closed, Drop 2, Drop 2&$, Open or C voicing.

Block or Closed Voicing

Drop 2-4 Voicing

Drop 2 Voicing

14

C or Open Voicing

PASSING CHORDS There are a handful of techniques you can use for passing chords. You will use passing chords when the note in the melody your voicing is not in the chord. For example, if the chord is Cmaj7 (C, E, G, B,) and the note you are voicing is a D, what chord would you use to har monize this D?

Riverboat on the Hudson, N.Y., ca. July 1947

EXAMPLE #16 You could use a Bbmaj9 chord, but your voice leading may become a problem, which will become more apparent as you continue to move along to the next voicing. The easiest approach would be to use the 2 chord. In this case a Cmin7 chord.

BLUSETTE

The 2 Passing Chord

EXAMPLE #17 Another passing chord is the Diminished Passing. The main drawback is that diminished chords are a-tonal and don’t define a keycenter. They are ambiguous, but they work fine if they’re surrounded by chords that do define the key center.

Compared to What

G minor 2 Passing

G minor 2 Passing

Diminish Passing

15

Diminish Passing

EXAMPLE #18 Half Step Slide. is just what it implies. You move your voicing a half step up or down depending. This works great for blues as in this example.

B7

C7

B7 C7 C7

F9

B6 C6

E7 F6 E7

F7

E7 F7

Gb7 G7 Gb7 G7 Gb7 G7

Yendi Brass Band. Instructions to a village brass band. Yendi, Togoland 1953

16

EXAMPLE #19 Free Lead This is an example of a “Free Lead” where the top voice plays the melody while the lower voices comp the changes. This works great when there are quick 8th or 16th note triplets that would be too heavy to voice for the whole section. In this example we are just playing 8ths. Notice how its close voicing in bar 1 and goes to a C voicing or open voicing in bars 2 & 4. Free Lead

DOLPHIN DANCE

EXAMPLE #20. Six For Major 7th When your root is in the melody and the chord is a Major 7th or 1 chord, your 2nd voice from the top would not play the major 7 because of the 1/2 step between the root and the major 7th. You would have your 2nd voice play the 6th. For a dominant 7th chord this would be the 6th or 13th instead of flat seven (b7).

Root & 6th

ALL OF ME

Root & 13th

17

I LOVE YOU MORE, by FS

DS Repeats Coda Double Bar

Rehearsal Letters or Marks

1st & 2nd Endings

Repeats

DS al Coda

Repeats

1st & 2nd Endings

“Fermata” (bird’s eye) the big note at the end :)

C H A R T L AY O U T Just as important as voicings, is the “look & feel” of the chart or music you will hand the horn player at the session or rehearsal. To start, a good rule of thumb is to have 4 bars to a stave with the beginning of a musical section starting at the left end of the staff. Notice in this chart there seems to be more than 4 bars in a lot of places. That’s because this tune has musical sections that are 6 bars long instead of 4 or 8 bars. You can see in the intro there are 8 bars with a pickup bar at the beginning. 8 bars can work great if it’s easy to read with not a zillion notes cramed together. The 2nd thing are the “rehearsal marks or letters.” These are vital in a rehearsal or studio setting. You can also number your bars, especially good for larger groups. I think it works best when the rehearsal marks are at the beginning of muscial sections. So lets read through this song. First we play the intro straight through, then we’re on to “Letter A” where you see the “Vocal In.” This is very important when working with singers. Sometimes vocalist, because they’re focusing on doing a show, may not come in at “letter A.” If they don’t, you keep playing the intro until they do. When the vocalist starts to sing, you are at letter “A.” Letter A is the first verse and onto letter “B” for the chorus. We then see a repeat at the end of the staff, so we GO BACK to letter “A” for the 2nd verse. Then when we hit the “repeat” after “B” we continue on to the 4 bar interlude over an Amin7 chord. Now we’ve arrive at letter “C” the bridge. The bridge is in 2 sections, each being 16 bars long. Letter C and letter D. Note the “1st and 2nd Ending” at the bottom of the page. The first time you play letter D, you take the “1st Ending,” and the second time you play letter D you take the “2nd Ending.” You then move on to letters E and F for the solo over Amin7 and the chorus. The next sign post is the “DS al Coda.” This is short hand for something in Italian that I can’t remember right now. Anyway, you then skip back to the “DS at letter “A” for the last verse and chorus and proceed to the “Coda,” then jump to the Coda on page 2. Then follow the repeats and endings and finally to the “Fermata” to end. I picked this chart for this example because it had a lot of elements that you’ll run into when writing a individual horn part. Regarding the “DS al Coda.” You will also find alternatives to this sign post. DC will mean, go to the top and there will be no symbol for this. Sometimes you will see “DC al Fine” which means go back to the top and play to the end. There are at times a double Coda. So there are a few variations to this sign.

19

1902, Lúðraþeytarafélag Reykjavíkur framan við Barnaskólann við Tjörnina.

TRANSPOSING & PREPARING YOUR PARTS I would first suggest writing your arrangement in concert pitch on a 2 stave system, treble and bass clef. Like for piano. Most of your big composers and conductors like to use a “transpose score,” but for starters it might be easier for you to see and learn what you’re doing if you write out your arrangement in concert pitch. Most brass and wind instruments are not written in “Concert.” When someone speaks of “Concert” pitch, that’s the actual note we hear. First, make sure to write out all your chord symbols above the bar so you can see what you’re voicing to. Key Signature. When copying your charts, the first thing you need to do when transposing your parts is to change the key signature. For example, if you’re transposing for the Alto Sax and the key of your arrangement in is C (no sharps or flats) you would first write the key signature for A major, which is 3 sharps and up a 6th interval. Everything now should work out beautifully. If there are accidentals on the arrangement there will be on the transposed parts.

20

Trumpet Practically all the trumpets you’ll be writing for are in the key of Bb. Meaning, that when the trumpet plays C on the horn, we actually hear a Bb. So if you want to hear a Bb note, you write a C on the trumpet part. For trumpet, write everything up 1 whole step from the concert pitch and in the treble clef. Written

# #

Most Effective Range

Sounds/Concert

Total Range

Flugelhorn

Like the trumpet, the flugelhorn is in the key of Bb and their range is similar. The strength of this instrument is in the staff. For flugelhorn, write everything up 1 whole step from the concert pitch and in the treble clef. Written

# #

Sounds/Concert

Most Effective Range

Total Range

Trombone

is in Concert pitch. No transposing, and is written in the bass clef. Written

Most Effective Range

Sounds/Concert

Total Range Flute. is in Concert. No transposing, and is written in the treble staff.

Written

Sounds/Concert

21

Soprano Saxophone. Is in Bb, so you transpose up 1 whole step and in the treble staff. Written

Most Effective Range

Sounds/Concert

# # Total Range

Alto Saxophone Is in the key of Eb. That would be a major 6th down from C. When an Alto Sax plays a C, we hear Eb. You transpose the Alto Sax up a major 6th from the concert pitch, in the treble staff.

## #

Written

Most Effective Range

Sounds/Concert

Total Range

Tenor Saxophone. Is also in the key of Bb. You transpose your tenor sax up a whole step, and since the tenor is written in treble staff you also need to compensate for this so an additional octave up is required. You transpose the Tenor Sax up a 9th and in the treble clef.

# #

Written

Most Effective Range

Sounds/Concert

Total Range

22

Baritone Saxophone. Like the Alto sax, the baritone sax is in the key of Eb and since it is written in treble clef you need to compensate an octave. So a major 6th and an octave is a 13th. Baritone is transpose up 13th in the treble clef. When you write your arrangement in concert, the baritone will be written in the bass clef. When you go to transpose that part, change the key signature and the bass clef to a treble clef and you’re automatically up a 13th. Written

## #

Most Effective Range

Sounds/Concert

Total Range

The SEAN+FRED Show Sextet 2013

23

Dynamics and Articulations. If you just write a few notes on the page, this only tells the player the pitch and the r hythm of the phrase. In addition, they need to know how loud the note is played. Is it played short or long or accented, with a cresendo? Telling the musician how to play the notes is important and will make all the difference in your music. Nuance is everything. This handful of articulations are what I use 99% of the time and there are many more. At a session or rehearsal, articulations are easy to play around with and your horn players can help you with this. Tweaking is cool, just like with your r hythm section. In a rehearsal I will make minor adjustments to the score. Taking notes out, changing a short note for a long note. These kinds of adjustments are quick because you are using charts with rehearsal marks.

Marcato = with an accent, played long

Staccato = played short

Martellato = with an accent, played short

Tenuto = played long - it’s full value.

Crescendo = gradually increase volume

Decreascendo = gradually decrease volume

Legato = smooth and connected

Glissando = glide from one pitch to another.

Fall = a Jazz articulation meaning to play a note and then a random selection of notes descending in pitch. Fermata: held beyond the written value at the discretion of the performer.

Dynamic Marking = degrees of volume Forzando: loud accent followed by a soft to loud crescendo.

24

I hope what you’ve learned in this tutorial will be useful. These are only techniques. The challenge is to make music. Keep in mind to not OVER-WRITE and is so easy to do. Most of my charts take a few tweaks after the first run through with real players and I mostly take out notes. Hardly do I ever add, unless I’ve changed the idea or concept. I would try not to first write your chart to a midi track before hearing it with real players. Midi tracks can deceive you when writing your arrangement. You will never get the nuance of real players, playing real horns. Midi can give you a general idea, but some parts that work, or don’t for midi, may, or may not work with real horns. Expression, dynamics, and nuance count for a lot in weather an idea you have works. Without picking up an instrument, think about where and how the horns would work in your song. Would you have the horns on the chorus for a nice build, and maybe add something small to the 2nd or 3rd verse? If I add horns to the bridge should it contrast the horns on the chorus? This is the kind of stuff I think about when I walk my dogs. I don’t know the exact notes, but I Know the sound I want, and that will tell me the range the horn will be played. Low and droning, or high a spicy? This is the kind of thing you can get good at with practice, and there’s nothing wrong with re-writing your chart. I think Mozart and maybe one other Russia dude could get it right the first time. Beethoven re-wrote a ton. If you’re consistently working with a couple horn players it can be a lot of fun. Try different combinations. Remember the band, WAR? Their horn section was har monica and alto sax. What a great sound that was! Please be in touch and let me know what’s going on with you or any feedback you may have. Ok, let’s make music. FS FRED STICKLEY MUSIC

25