SICIM S.p.A. Milano EPC Office [PDF]

Zitiervorschau

1/2

Odolo, 13/09/2021 UC/FG/tc/EXP To

SICIM S.p.A. Milano EPC Office Attn: Ms Liane Longhi Email: [email protected]

SUBJECT: YOUR ENQUIRY REFERENCE SA010-MR-005-Rev. A_012 PROJECT: UPGRADE UTHMANIYAH-ABQAIQ PIPELINES SYSTEMS PROJECT SA010 MANUAL BALL VALVES OMS OFF10620_A Dear Sirs, Following receipt of your a/m enquiry dated 21/08/2021, we are pleased to submit you our quotation for manual ball valves as per attached list.

TERMS AND CONDITIONS CURRENCY

EURO

DELIVERY TIME (FCA BIONE BASIS)

30 – 32 calendar weeks from P.O. Anyway, to be agreed during negotiations.

DELIVERY POINT

FCA - OMS SALERI, BIONE (BS) ITALY *For any exported goods the Italian customs formalities will be at our care and cost

PACKING (SEAWORTHY TYPE)

Extra price: QUOTED

2/2

FOB IT. PORT (Genova/La Spezia) Extra price: QUOTED PAYMENT TERMS

To be agreed.

OFFER VALIDITY

120 Days

3.1 CERT./DOC./TESTING

Included in unit prices.

NDT

Included in unit prices.

PMI

Included in unit prices.

FERRITE TEST

Included in unit prices.

PAINTING

Included in unit prices.

SPARE PARTS

Commissioning and Start-up: N/A 2/years: a detailed list shall be submitted only after order placement. Anyway, we recommend a quantity of spare parts related to 10% of P.O. valves (min. q.ty 1). Lump sum is estimated as 10% of valves value.

COUNTRY OF MANUFACTURING

MADE IN ITALY

Other terms and conditions will be mutually agreed during negotiations.

Best Regards Attachments: 1. Valve list 2. Technical documents

Customer: SICIM SPA (OMS SALERI SAUDIA) Project: ENGINEERING, PROCUREMENT & CONSTRUCTION FOR UPGRADE UTHMANIYAH-ABQAIQ PIPELINES SYSTEMS Enquiry n°: SA010-MR-005-Rev. A_012

FLANGE SIZE (in)

BORE SIZE (in)

CLASS

ENDS

BORE

OMS VALVES MODEL

*VALVE TYPE

9COM ISOLATIO PE60000002 N 530101.03 6CS1P02 50 VALVES 5

18

18

600

RF

FULL

S7100.T.S F.600

2

A350 LF2 A350 LF2 CL.1 CL.1

N/A

9COM ISOLATIO 60000002 N 50 VALVES

2

2

600

RF

FULL

S7100.T.S F.600

A1.2.1

N/A

9COM ISOLATIO PE60000002 N 530101.02 3LE0P02 50 VALVES 6

12

12

300

RF

FULL

A1.2.2

N/A

9COM ISOLATIO PE60000002 N 530101.02 3LE0P02 50 VALVES 6

20

20

300

RF

A1.2.3

N/A

9COM ISOLATIO PE60000002 N 530101.02 3LE0P02 50 VALVES 6

24

24

300

A1.3.1

N/A

9COM ISOLATIO PE60000002 N 530101.03 3CS1P02 50 VALVES 2

16

16

B1.1.1

N/A

9COM HOT TAP 60000002 VALVES 50

TBA

N/A

20

B1.1.2

N/A

9COM HOT TAP 60000002 VALVES 50

TBA

N/A

A2.1.1

N/A

A2.1.2

SEALS

STUDS

NUTS

QTY

A182 A479 TP F316/F31 316/316L 6L

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

1

GEAR

2

A182 A182 A350 LF2 A350 LF2 A479 TP F316/F31 F316/F31 CL.1 CL.1 316/316L 6L 6L

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

4

LEVER

S7100.T.S F.300

2

A350 LF2 A350 LF2 CL.1+FBE CL.1+FBE

A351 CF8M

A182 A479 TP F316/F31 316/316L 6L

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

1

GEAR

FULL

S7100.T.S F.300

2

A350 LF2 A350 LF2 CL.1+FBE CL.1+FBE

A351 CF8M

A182 A479 TP F316/F31 316/316L 6L

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

2

GEAR

RF

FULL

S7100.T.S F.300

2

A350 LF2 A350 LF2 CL.1+FBE CL.1+FBE

A351 CF8M

A182 A479 TP F316/F31 316/316L 6L

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

6

GEAR

300

RF

FULL

S7100.T.S F.300

2

A350 LF2 A350 LF2 CL.1 CL.1

A351 CF8M

A182 A479 TP F316/F31 316/316L 6L

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

2

GEAR

20

300

RF

FULL

S7100.T.S F.300.SP/ EP

2

A350 LF2 A350 LF2 CL.1+FBE CL.1+FBE

A351 CF8M

A182 A479 TP F316/F31 316/316L 6L

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

1

GEAR

24

24

300

RF

FULL

S7100.T.S F.300.SP/ EP

2

A350 LF2 A350 LF2 CL.1+FBE CL.1+FBE

A351 CF8M

A182 A479 TP F316/F31 316/316L 6L

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

2

GEAR

9COM ISOLATIO PE60000124 N 530101.02 3LE0P02 20 VALVES 7

30

30

300

RF

FULL

S7100.T.S F.300

2

A350 LF2 A182 A350 LF2 A350 LF2 A479 TP CL.1+316 F316/F31 CL.1+FBE CL.1+FBE 316/316L L 6L

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

4

GEAR

N/A

9COM ISOLATIO PE60000124 N 530101.02 3LE0P02 20 VALVES 7

40

40

300

RF

FULL

S7100.T.S F.300

2

A350 LF2 A182 A350 LF2 A350 LF2 A479 TP CL.1+316 F316/F31 CL.1+FBE CL.1+FBE 316/316L L 6L

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

1

GEAR

B2.1.1

N/A

9COM HOT TAP 60000124 VALVES 20

30

30

300

RF

FULL

S7100.T.S F.300.SP/ EP

2

A350 LF2 A182 A350 LF2 A350 LF2 A479 TP CL.1+316 F316/F31 CL.1+FBE CL.1+FBE 316/316L L 6L

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

4

GEAR

A3.1.1

N/A

9COM ISOLATIO PE60000002 N 530101.03 3CS1P02 39 VALVES 1

2

2

300

RF

FULL

S7100.SF. 300

1

A182 A350 LF2 A350 LF2 A479 TP F316/F31 CL.1 CL.1 316/316L 6L

-

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

2

LEVER

A3.2.1

N/A

9COM ISOLATIO PE60000002 N 530101.03 3CS1P02 39 VALVES 1

2

2

300

RF

FULL

S7100.SF. 300

1

A182 A350 LF2 A350 LF2 A479 TP F316/F31 CL.1 CL.1 316/316L 6L

-

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

2

LEVER

A3.3.1

N/A

9COM ISOLATIO PE60000002 N 530101.03 3CS1P02 39 VALVES 1

2

2

300

RF

FULL

S7100.SF. 300

1

A182 A350 LF2 A350 LF2 A479 TP F316/F31 CL.1 CL.1 316/316L 6L

-

RPTFE

VITON GLT AED

ASTM A320 Gr. L7M

A194 Gr. 7M (S3)

4

LEVER

B3.1.1 (HOLD)

N/A

9COM ISOLATIO 60000002 N 39 VALVES

2

2

150

RF

FULL

S7100.SF. 150

1

A182 A182 A479 TP F316/F31 F316/F31 316/316L 6L 6L

-

RPTFE

VITON A194 8M A193 B8M GLT AED CL.1

24

LEVER

TAG

A1.1.1

N/A

A1.1.2

PED CAT

TBA

TBA

TBA

PIP CL

N/A

N/A

N/A

BODY/FL ANGES

A351 CF8M

HEAD

BALL

A351 CF8M

STEM

SEAT UNIT

OPERATI PAINT NG SYSTEM SYSTEM

SEAT INSERT

ITEM

CLIENT CODE

DATA SHEET NO

OMS Offer n°: OFF10620 Revision: A Date: 13/9/2021

60

Page 1 of 4

APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. APCS-26 ON CARBON STEEL PARTS. NO COATING

dP FOR ACTUAT INSPECTI SERVICE LEAKAG OR ON CLASS E RATE SIZING CLASS (BAR)

NOTES

UNIT PRICE

N/A

LEVEL 3

SOUR CRUDE

ZERO LEAKAGE

7,16)

UOTED

N/A

LEVEL 3

SOUR CRUDE

ZERO LEAKAGE

16)

UOTED

N/A

LEVEL 3

SOUR CRUDE

ZERO 1,3,16) LEAKAGE

UOTED

N/A

LEVEL 3

SOUR CRUDE

ZERO LEAKAGE

1,3,16)

UOTED

N/A

LEVEL 3

SOUR CRUDE

ZERO LEAKAGE

1,3,16)

UOTED

N/A

LEVEL 3

SOUR CRUDE

ZERO LEAKAGE

7,16)

UOTED

N/A

LEVEL 3

SOUR CRUDE

ZERO 1,3,16,25, LEAKAGE 26,28,29)

UOTED

N/A

LEVEL 3

SOUR CRUDE

ZERO 1,3,16,25, LEAKAGE 26,28,29)

UOTED

N/A

LEVEL 3

SOUR CRUDE

ZERO 1,3,5,16) LEAKAGE

UOTED

N/A

LEVEL 3

SOUR CRUDE

ZERO 1,3,5,16) LEAKAGE

UOTED

N/A

LEVEL 3

SOUR CRUDE

1,3,5,16,2 ZERO 5,26,28,29 LEAKAGE )

UOTED

N/A

LEVEL 3

SOUR CRUDE

ZERO LEAKAGE

16)

UOTED

N/A

LEVEL 3

SOUR CRUDE

ZERO LEAKAGE

16)

UOTED

N/A

LEVEL 3

SOUR CRUDE

ZERO LEAKAGE

16)

UOTED

N/A

LEVEL 3

ZERO SOUR CRUDE LEAKAGE

16)

UOTED

TOTAL VALUE

EXTENDE D PRICE

Customer: SICIM SPA (OMS SALERI SAUDIA) Project: ENGINEERING, PROCUREMENT & CONSTRUCTION FOR UPGRADE UTHMANIYAH-ABQAIQ PIPELINES SYSTEMS Enquiry n°: SA010-MR-005-Rev. A_012

ITEM

TAG

CLIENT CODE

PED CAT

DATA SHEET NO

PIP CL

FLANGE SIZE (in)

BORE SIZE (in)

CLASS

ENDS

BORE

OMS VALVES MODEL

OMS Offer n°: OFF10620 Revision: A Date: 13/9/2021

*VALVE TYPE

BODY/FL ANGES

HEAD

BALL

STEM

SEAT UNIT

SEAT INSERT

SEALS

STUDS

NUTS

QTY

OPERATI PAINT NG SYSTEM SYSTEM

dP FOR ACTUAT INSPECTI SERVICE LEAKAG OR ON CLASS E RATE SIZING CLASS (BAR)

NOTES

1) THE VALVES SHALL BE INTERNALLY FBE COATED AS PER SYSTEM APCS 102B OF SAES-H-002 \ 09-SAMSS-091 AS PER MATERIAL REQUISITION. ACCORDING TO DOC. 04-SAMSS-048 PARA. 4.2 ALL VALVES (CAST AND FORGED)

SHALL BE SHELL TESTED BEFORE AND AFTER APPLICATION OF THE COATING OR LINING.

3) AS PER PARA 10.2 OF DOC. 04-SAMSS-035 CRITICAL AREAS INCLUDE PRESSURE CONTAINING SEAL AREAS (STATIC AND DYNAMIC SEALING AREAS) , SEATING POCKETS/FACES, PRESSURE BOUNDARY PENETRATION CONNECTIONS, AND SURFACES

AREAS BETWEEN INJECTION FITTINGS AND SEAT/STEM POCKETS SHALL BE OVERLAYED WITH SS316L OVERLAY. SAME OVERLAY SHALL BE APPLICABLE ON ALL WETTED PARTS IN NOT CORROSION RESISTANCE MATERIALS WHERE FBE COATING IS NOT FEASEABLE OR EASLY TO BE APPLICABLE

DISCONTINUITIES IN CORROSION PROTECTION ARE NOT PERMITTED, INTERFACE AREAS BETWEEN COATING AND CORROSION RESISTANT MATERIAL SHALL INCLUDE OVERLAPS.

5) IN ORDER TO PROPOSE A BETTER TECHNICAL AND COMMERCIAL PROPOSAL BALL IS REQUIRED IN CLADDED EXECUTION (A105N PLUS SS316L OVERLAY) IN LIEU OF SOLID SS316L EXECUTION. PLEASE ADVISE IF OUR SOLUTION IS NOT ACCEPTABLE FOR YOUR SIDE

7) AS PER DOC. 04-SAMSS-051 PARA 6.11 BEING VALVES 8" AND ABOVE CRITICAL AREAS SUCH AS SEAT POCKETS, STEM SEAL HOUSING AND OTHER DYNAMIC SEAL AREAS SHALL BE OVERLAID WITH SS316L. MINIMUM THICKNESS OF OVERLAY SHALL BE 3 mm

16) ALL WETTED MATERIALS WILL BE SUPPLIED ACCORDING TO SPEC. NACE MR01-75/ISO 15156(SOUR SERVICE)

25) THE VALVES SHALL BE SUPPLIED WITH ONE SEAT DOUBLE PISTON EFFECT DESIGN AND THE OTHER SEAT SELF RELIEVING DESIGN (DIB-2 CONFIGURATION OF API 6D)

26) WE UNDERLINE THAT THESE VALVES ARE BIDIRECTIONAL FOR SEALING, BUT UNIDIRECTIONAL FOR INSTALLATION. BODY TO BE MARKED ACCORDINGLY

28) ACCORDING TO MATERIAL REQUISITION, THE VALVE SHALL BE FOR SUITABLE FOR HOT TAP SERVICE. NOT BEING OTHERWISE SPECIFIED INTERNAL DIAMETER SHALL BE CONSIDERED AS PER API 6D SPECIFICATION

WE CONSIDER THE TAPPING MACHINE AND ALL OTHERS ACCESSORIES NECESSARY FOR THE TAPPING ACTIVITIES OUTSIDE OF OUR SCOPE OF SUPPLY. PLEASE NOTE

29) THE VALVES WILL BE SUPPLIED SUITABLE FOR HORIZONTAL INSTALLATION

GENERAL NOTES

A) WE RESERVE THE RIGHT TO UPDATE OUR BID SHOULD ANY SPECIFICATIONS, STANDARDS, DRAWINGS, NORMS NOT SUBMITTED FOR OUR EVALUATION PROVE TO HAVE AN IMPACT ON QUOTED VALVES

B) THE VALVES HAVE BEEN QUOTED WITH PARTS IN CAST OR FORGED\BAR STOCK EXECUTION AS PER OMS STANDARD IF NOT PROHIBITED BY ARAMCO SPECIFICATIONS

Page 2 of 4

NOTES

UNIT PRICE

EXTENDE D PRICE

Customer: SICIM SPA (OMS SALERI SAUDIA) Project: ENGINEERING, PROCUREMENT & CONSTRUCTION FOR UPGRADE UTHMANIYAH-ABQAIQ PIPELINES SYSTEMS Enquiry n°: SA010-MR-005-Rev. A_012

ITEM

TAG

CLIENT CODE

PED CAT

DATA SHEET NO

PIP CL

FLANGE SIZE (in)

BORE SIZE (in)

CLASS

ENDS

BORE

OMS VALVES MODEL

OMS Offer n°: OFF10620 Revision: A Date: 13/9/2021

*VALVE TYPE

BODY/FL ANGES

HEAD

BALL

STEM

SEAT UNIT

SEAT INSERT

SEALS

STUDS

NUTS

QTY

OPERATI PAINT NG SYSTEM SYSTEM

dP FOR ACTUAT INSPECTI SERVICE LEAKAG OR ON CLASS E RATE SIZING CLASS (BAR)

NOTES

FOR VALVES ACCORDING TO 04-SAMSS-051 (VALVES ACCORDING TO API 6D AND SIZE 2" AND ABOVE) WE REMARKS THAT:

ALL BODY ARE PROPOSED IN FORGED EXECUTION IN LIEU OF CASTING REQUIRED ON VALVES DATA SHEETS

ALL SEAT UNIT ARE PROPOSED IN FORGED EXECUTION. BALL FOR RATING CLASS 600 AND BELOW AND SIZE 3" AND ABOVE ARE PROPOSED IN CAST OR CLADDED EXECUTION.

ALL STEM ARE PROPOSED IN ROLLED BAR EXECUTION

C) WE PROPOSE OUR STANDARD STEM PACKING IS MADE BY INNER SEALS IN ELASTOMERIC AND OUTER SEAL ELEMENT IN GRAPHITE (FIRE SAFE). WE NOT PROPOSE PURE GRAPHITE PACKING AS MENTIONED ON VALVES DATA SHEETS BEING OUR PROPOSAL IN FULLY COMPLIANCE WITH ARAMCO SAMSS

D) WE PROPOSE GRAPHITE GASKETS AND NOT SPRIRAL WOUND GASKETS PRESENT IN VALVES DATA SHEETS IN ORDER TO STANDARIZE OUR PRODUCTION AND BEING OUR PROPOSAL IN FULLY COMPLIANCE WITH ARAMCO SAMSS

E) ACC. TO DOC. SAES-L-108 TABLE II SPRINGS MATERIAL SHALL BE INCONEL X-750, EXCEPTION MADE FOR VALVES WITH TRIM IN 316, 20, SSS, COPPER ALLOY AND NICKEL ALLOY THAT WILL BE SUPPLIED WITH SPRINGS IN ELGILOY

F) CARBON STEEL AND LOW ALLOY STEEL BOLTING INSTALLED ON CARBON STEEL VALVES SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF VALVES BODY

BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING.

G) THE VALVE WILL BE FIRESAFE CERTIFIED AS PER API 607 OR ISO 10497 AND NOT API-6FA. THEREFORE WE UNDERSTAND THAT VALVE BODY MUST NOT BE SUPPLIED WITH FIRE PROOFING PROTECTION

J) REGARDING PARA 5 OF DOC. 04-SAMSS-048 WE CONSIDER THAT ALL VALVES ARE NOT IN FLARE SYSTEM ISOLATION. THEREFORE ALL ADDITIONAL TEST ARE CONSIDERED AS NOT APPLICABLE

K) WE HAVE PROPOSED APCS 26 ACCORDING TO SAES-H-001 ON CARBON STEEL PARTS ONLY AND NO COATING ON ALL STAINLESS STEEL AND INCONEL 625 PARTS (I.E.SEALANT INJECTION DEVICE, DRAIN VALVES)

M) NOT BEING OTHERWISE SPECIFIED WE HAVE CONSIDERED API 6D QUALITIY SPECIFICATION LEVEL 1 (QSL 1) FOR API 6D VALVES, AND THE DOCUMENTATION SHALL BE IN ACCORDANCE WITH API 6D ANNEX J PAR J.4

N) IN ORDER TO COMPLY WITH REQUIREMENT OF -28°F OF MINIMUM SERVICE TEMPERATURE WE PREFER TO OFFER LOW TEMPERATURE CARBON STEEL IN LIEU OF CARBON STEEL AS BODY, BONNET AND BALL MATARILAS (IN CASE OF CLADDED BALL)

FOR THE SAME REASON WE PREFER TO OFFER ASTM A320 Gr. L7M \ A194 Gr. 7M (S3) IN LIEU OF A193 GR B7M/ASTM A194 GR 2HM AS BOLTING MATERIAL

*VALVE TYPE

1: BALL VALVE SPLIT BODY FLOATING BALL, "SPLIBO" - 2/3 PIECES (S7100, S7400…)

Page 3 of 4

UNIT PRICE

EXTENDE D PRICE

Customer: SICIM SPA (OMS SALERI SAUDIA) Project: ENGINEERING, PROCUREMENT & CONSTRUCTION FOR UPGRADE UTHMANIYAH-ABQAIQ PIPELINES SYSTEMS Enquiry n°: SA010-MR-005-Rev. A_012

ITEM

TAG

CLIENT CODE

PED CAT

DATA SHEET NO

PIP CL

FLANGE SIZE (in)

BORE SIZE (in)

CLASS

ENDS

BORE

OMS VALVES MODEL

OMS Offer n°: OFF10620 Revision: A Date: 13/9/2021

*VALVE TYPE

BODY/FL ANGES

HEAD

BALL

STEM

2: BALL VALVE SPLIT BODY TRUNNION - 2/3 PIECES (S7100.T, S7500.T, S7600.T…)

3: BALL VALVE SPLIT BODY FLOATING BALL "VULCAN" - 2/3 PIECES - INSERT BODY (VULCAN 3500)

4: BALL VALVE SPLIT BODY FLOATING BALL "3P" - 3 PIECES - SANDWICH CONSTRUCTION

5: BALL VALVE TOP ENTRY TRUNNION "ENTOP" - 1 PIECE

6: BALL VALVE TOP ENTRY FLOATING "ENTOP" - 1 PIECE

7: BALL VALVE ALL WELDED BODY

Page 4 of 4

SEAT UNIT

SEAT INSERT

SEALS

STUDS

NUTS

QTY

OPERATI PAINT NG SYSTEM SYSTEM

dP FOR ACTUAT INSPECTI SERVICE LEAKAG OR ON CLASS E RATE SIZING CLASS (BAR)

NOTES

UNIT PRICE

EXTENDE D PRICE

DocuSign Envelope ID: D23C0D38-F584-4B5C-802A-C502E8B28155

Aramco Overseas Company B.V. Scheveningseweg 62-66 2517 KX The Hague The Netherlands

Tel: +31 (0) 88262 2000 Fax: +31 (0) 88262 3000 www.aramcooverseas.com

OMS SALERI SPA BIONE ATTN: MR. I. VACCARO VIA PRADA 7/9 25070 BIONE ITALY The Hague, June 2, 2021 AOC Ref: AA/IL 107000193578 SUBJECT: PLANT EVALUATION Vendor ID: 10029261 - Plant ID: 30005131 - Ariba Network ID: AN01010188882 Dear Mr. Vaccaro, In AOC letter from April 21st, 2021 we informed you that plant in OMS SALERI SPA BIONE was “Approved with Corrective Actions”. We are pleased to inform you that following a further evaluation your company status has changed and is now Approved with limitations to supply the 9COM material(s) listed in the attachment. This approval should not be regarded as a commitment from Aramco Overseas Company (AOC) to purchase from you. However, your company will have the opportunity along with other approved suppliers to respond to requests for quotation in accordance with AOC’s established policies and procedures. It is the responsibility of the manufacturer to notify AOC in a timely manner of any change of company name and/or address, change of manufacturing location (sub sourcing fabrication of major components) and/or discontinuance of production of approved material(s). The notification should be presented on your company letterhead paper, signed by Senior Management and addressed to the AOC Supervisor Sourcing & Supplier Relationship Management (SRM) Unit at [email protected]. Important note: In case of change of the manufacturing location or 9COM(s) relocation, the approval of the new manufacturing plant is at the discretion of Saudi Aramco and may be rejected. Consideration for approval of your new plant depends, amongst others, on the criticality of the material, and the present number of Saudi Aramco approved manufacturing plants worldwide. Please quote the above referenced Vendor ID and Plant ID in all future correspondence. We would like to take this opportunity to thank you for your interest in doing business with AOC and SAO. For any questions regarding this notification, please use the aforementioned email address. Yours faithfully,

Lenka Antolova Supervisor Sourcing & SRM Supplier Chain Management Dept.

K.v.K No. 28040948 VAT No: NL.00.85.899.B01

DocuSign Envelope ID: D23C0D38-F584-4B5C-802A-C502E8B28155

Attachment: Inspection lot: 107000193578 Approved 9COM(s) with limitations: 9COM 6000000244*

6000000246*

6000000248*

6000000249*

6000000250*

6000000252*

6000000253*

6000012420*

Description VALVE BALL; SIZE NPS 2 THROUGH 24,ASME CL 150 AND UP SUPPLY, FLANGED OR BUTTWELD END CONN,STEEL BODY,STYLE SPLIT BODY, TRUNNION SUPPORTED SUPPORT,METAL SEATED SEAT, 04-SAMSS-035,04-SAMSS-048 04SAMSS-051,WITH OR WITHOUT ACTUATOR VALVE BALL; SIZE NPS 1/4 TO 2 INCH,ANY RATING SUPPLY, SOCKET WELD, THREADED OR SPECIAL ENDS END CONN,STEEL BODY, 04-SAMSS-035,04SAMSS-048,WITH OR WITHOUT ACTUATOR VALVE, BALL; SIZE ANY,2000-5000 PSI SUPPLY SUPPLY,FLANGED OR BUTTWELD END CONN,STEEL BODY,STYLE SPLIT BODY,TRUNNION SUPPORTED SUPPORT, SOFT SEATED SEAT,04-SAMSS-055,API 6A,WITH OR WITHOUT ACTUATOR VALVE BALL; SIZE NPS 26 AND UP,ASME CLASS 150 AND UP SUPPLY, FLANGED OR BUTTWELD ENDS END CONN,STEEL BODY,STYLE SPLIT BODY, TRUNNION SUPPORTED SUPPORT,METAL SEATED SEAT, 04-SAMSS-051,04-SAMSS-035 04SAMSS-048,WITH OR WITHOUT ACTUATOR VALVE BALL; SIZE NPS 2 THRU 24,ASME CLASS 150 AND UP SUPPLY, FLANGED OR BUTTWELD END CONN,STEEL BODY,STYLE SPLIT BODY, TRUNNION SUPPORTED SUPPORT,SOFT SEATED SEAT, 04-SAMSS-051,04-SAMSS-035 04SAMSS-048,WITH OR WITHOUT ACTUATOR VALVE BALL; SIZE 26 INCH AND UP,ANSI CL 150 AND UP SUPPLY,FLANGED OR BUTTWELD END CONN,STEEL BODY, SOFT SEATED BODY,STYLE TOP ENTRY,TRUNNION SUPPORTED SUPPORT,04-SAMSS-051,04-SAMSS-035 04SAMSS-048,WITH OR WITHOUT ACTUATOR VALVE BALL; SIZE 2 IN TO 24 IN, SOFT SEATED,ANSI CL 150 AND UP SUPPLY, FLANGED OR BUTTWELD END CONN,STEEL BODY,STYLE TOP ENTRY, TRUNNION SUPPORTED SUPPORT,04-SAMSS-035,04-SAMSS-051,WITH OR WITHOUT ACTUATOR VALVE BALL; SIZE NPS 26 AND UP,ASME CLASS 150 AND UP SUPPLY, FLANGED OR BUTTWELDED END CONN,STEEL BODY,STYLE SPLIT BODY, TRUNNION SUPPORTED SUPPORT,SOFT SEATED SEAT, 04-SAMSS-051,04-SAMSS-035 04SAMSS-048,WITH OR WITHOUT ACTUATOR

LIMITATIONS: * Engineering by Odolo Plant, as per findings of IL # 107000126830. Previously Approved 9COM(s) with limitations: 9COM 6000000239*

6000000240* 6000000319*

Description VALVE BALL; SIZE NPS 2 THRU 12,ASME CLASS 150 & 300 SUPPLY, FLANGED OR BUTTWELDED END CONN,STEEL BODY,SEAT SUPPORTED SUPPORT, 04-SAMSS051,04-SAMSS-035 04-SAMSS-048,WITH OR WITHOUT ACTUATOR VALVE, BALL; SIZE UP TO 2 IN.,ANY SUPPLY, SOCKET WELD, THREADED, OR SPECIAL END CONN,ANY BODY,SEAT SUPPORTED SUPPORT, 04-SAMSS-035,04SAMSS-048,WITH OR WITHOUT ACTUATOR VALVE BALL; SIZE ANY SIZE,ANY RATING SUPPLY,ANY END END CONN, NONFERROUS (BRONZE/BRASS) BODY, 04-SAMSS-035,04-SAMSS-048,WITH OR WITHOUT ACTUATOR

LIMITATIONS: * Design and engineering limited to : OMS Saleri Odolo Plant

(St)

Project

Unit

(2)

SA010

00

Type

Des.

N°Serial Rev.

Vendor Name:

OMS SALERI S.p.a Document Title:

Contractor

Req. No:

Date:

Document No:

Enquiry n°: SA010-MR-005-Rev. A_012

Project : ENGINEERING, PROCUREMENT & CONSTRUCTION FOR UPGRADE UTHMANIYAH-ABQAIQ PIPELINES SYSTEMS BI# 10-01196 CONTRACT# 6600049184. LIST OF DEVIATIONS Bidder to provide, with the bid, duly filled deviation table, if any. Technical deviations mentioned elsewhere shall not be considered/evaluated. Serial No.

Deviation Accepted / Rejected / Para No.

Requir

Vendor Proposal

Reason for Deviation

FOR VALVES WITH NOTE 5 IN VALVES LIST BALL IS REQUIRED IN CLADDED EXECUTION (A105N PLUS SS316L OVERLAY) IN LIEU OF SOLID SS316L EXECUTION. PLEASE ADVISE IF OUR SOLUTION IS NOT ACCEPTABLE FOR YOUR SIDE

IN ORDER TO PROPOSE A BETTER TECHNICAL AND COMMERCIAL PROPOSAL

ement

1

VALVES DATA SHEETS

FOR VALVES WITH NOTE 28 IN VALVES LIST : 1. 2

VALVES DATA 2. SHEETS

INTERNAL DIAMETER SHALL BE CONSIDERED AS PER API 6D SPECIFICATION WE CONSIDER THE TAPPING MACHINE AND ALL OTHERS ACCESSORIES NECESSARY FOR THE TAPPING ACTIVITIES OUTSIDE OF OUR SCOPE OF SUPPLY

THE VALVES HAVE BEEN QUOTED WITH PARTS IN CAST OR FORGED\BAR STOCK EXECUTION AS PER OMS STANDARD IF NOT PROHIBITED BY ARAMCO SPECIFICATIONS WE REMARKS THAT:

3

VALVES DATA SHEETS

ALL BODY ARE PROPOSED IN FORGED EXECUTION IN LIEU OF CASTING REQUIRED ON VALVES DATA SHEETS ALL SEAT UNIT ARE PROPOSED IN FORGED EXECUTION. BALL FOR RATING CLASS 600 AND BELOW AND SIZE 3" AND ABOVE ARE PROPOSED IN CAST OR CLADDED EXECUTION. ALL STEM ARE PROPOSED IN ROLLED BAR EXECUTION

NOT BEING OTHERWISE SPECIFIED

Remark (by Purchaser)

4

VALVES DATA SHEETS

WE PROPOSE OUR STANDARD STEM PACKING IS MADE BY INNER SEALS IN ELASTOMERIC AND OUTER SEAL ELEMENT IN GRAPHITE (FIRE SAFE).

WE NOT PROPOSE PURE GRAPHITE PACKING AS MENTIONED ON VALVES DATA SHEETS BEING OUR PROPOSAL IN FULLY COMPLIANCE WITH ARAMCO SAMSS

5

VALVES DATA SHEETS

WE PROPOSE GRAPHITE GASKETS AND NOT SPRIRAL WOUND GASKETS PRESENT IN VALVES DATA SHEETS

IN ORDER TO STANDARIZE OUR PRODUCTION AND BEING OUR PROPOSAL IN FULLY COMPLIANCE WITH ARAMCO SAMSS

VALVES DATA SHEETS

WE PROPOSE VITON GLT AED AS SEALS

6

MATERIALS

ACCORDING TO OUTABLE III OF SAES-L-108. WE REMARKS THAT THE EXACT FLUID COMPOSITION IS NOT IN OUR POSSESSION

CARBON STEEL AND LOW ALLOY STEEL BOLTING INSTALLED ON CARBON STEEL VALVES SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF VALVES BODY

BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING.

7

8

VALVES DATA SHEETS

VALVES DATA SHEETS

9

DOC. 04SAMSS048PARA 5

10

VALVES DATA SHEETS

11

12

VALVES DATA SHEETS

NMR 7925

THE VALVE WILL BE FIRESAFE CERTIFIED AS PER API 607 OR ISO 10497 AND NOT API-6FA WE CONSIDER THAT ALL VALVES ARE NOT IN FLARE SYSTEM ISOLATION. THEREFORE ALL ADDITIONAL TEST ARE CONSIDERED AS NOT APPLICABLE

NOT BEING OTHERWISE SPECIFIED

WE HAVE PROPOSED APCS 26 ACCORDING TO SAES-H-001 ON CARBON STEEL PARTS ONLY AND NO COATING ON ALL STAINLESS STEEL AND INCONEL 625 PARTS (I.E.SEALANT INJECTION DEVICE, DRAIN VALVES)

NOT BEING OTHERWISE SPECIFIED

WE PREFER TO OFFER LOW TEMPERATURE CARBON STEEL IN LIEU OF CARBON STEEL AS BODY, BONNET AND BALL MATARILAS (IN CASE OF CLADDED BALL) FOR THE SAME REASON WE PREFER TO OFFER ASTM A320 Gr. L7M \ A194 Gr. 7M (S3) IN LIEU OF A193 GR B7M/ASTM A194 GR 2HM AS BOLTING MATERIAL

SUBMISSION DATES OF REQUIRED DOCUMENTATION SHALL BE DISCUSSED AND AGREEDED AFTER ORDER PLACEMENT DURING KICK OFF MEETING OR BEFORE ORDER DURING FINAL COMMERCIAL NEGOTATION

IN ORDER TO COMPLY WITH REQUIREMENT OF 28°F OF MINIMUM SERVICE TEMPERATURE

BASED ON REQUIRED DELIVERY AND WORKLOAD OF DOCUMENTATION DEPARTMENT.

HARD COPIES SHALL BE SUBMITTED DURING PHASE 603 ONLY

13

doc. 04SAMSS-003

DATE

THE DOCUMENT IS CONSIDERD AS NOT APPLICABLE 10 SEPTEMBER 2021

( STAMP AND SIGNATURE )

NOT BEING OTHERWISE SPECIFIED

Notes To Purchaser: This form shall be used only for Direct Charge (DC) purchase requisitions and orders for valves in Class 04. Valves shall be in accordance with 04-SAMSS's -035, -048, at minimum, and other 04-SAMSS's as applicable.

10-01196-0001

C

6/16/2019 6/16/2019

HHB

HDS

BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE

DESIGN SECTION

BALL

API 6D

Sub Type:

SAMSS's (in addition to 04-SAMSS-035 & 04-SAMSS-048)

LONG PATTERN, FULL BORE, TRUNNION MOUNTED

04-SAMSS-051

Pressure Class:

Size / Port:

CLASS 300

4" TO 24"

End Connections:

Operator Type:

FLANGED RF AS PER ASME B 16.5

Vendor References:

S7100.T.SF.300

DOUBLE BLOCK AND BLEED

SAES-L-102

9COM 6000000250

API 607 OR ISO 10497 AND NOT API-6FA

Firesafe:

YES API 6FA

6/16/2019

JNK

Maximum Service Temperature Minimum Service Temperature

NO VERTICAL Valve Stem: VER / HOR

HORIZONTAL HOR / VER

170 °F -28 °F

O

O

O

O

( C or F) ( C or F)

MAOP:

AS PER ASME B 16.34 PRESSURE RATING

MATERIALS SECTION Stem: A350 LF2 CL.1 (OBTAINED BY FORGING) WITH INTERNAL FBE COATING OR SS316L OVERLAY ON A479 Tp 316/316L (OBTAINED BY ROLLED BAR) ASTM A216 WCB WITH INTERNAL FBEFEASEABLE COATING SS316 AREA WHERE FBE IS NOT

6/16/2019

Body / Bonnel:

Seat / Inserts:

Wedge / Disc / Ball / Plug:

SEAT UNIT: 'A182 F316/F316L (OBTAINED BY FORGING) SS316 WITH SEAT RTFEINSERT: INSERTS RPTFE Packing / O-Rings:

A351 CF8M (OBTAINED BY CAST) SS316

STEM PACKING: VITON GLT AED PLUS GRAPHITE AS FIRE SAFE AS PER DOC. 04-SAMSS-051

Gaskets / Seals:

Bolting:

BLT A320 STUDGr. W/2 HEX STL ASTM A193 GR L7MHVY \ A194 Gr.NUT;ALLOY 7M (S3) B7M/ASTM A194 GR 2HM Coatings / Linings / Platings:

APCS 26 ACC. TO SAES-H-001 ON CARBON

SEALS: VITON GLT AED GRAPHITE GASKETS SPIRAL WOUND SS 316 AND GRAPHITE FLR

INTERNAL FBE COATING (APCS-102B) STEEL PARTS ONLY, NO COATING ON SS316 COMPONENTS EXTERNAL PAINTING AS PER SAES-H-001 (APCS-26)

Sour Service

Other:

YES DRAWING COMPLETION CERTIFICATE NO.

AND CERTIFICATION REQUIREMENTS, PER SAEP-334, UNDER

IS COVERED, FOR ALL APPROVAL

GEAR OPERATED

Other:

FLEX GPH PKG

REVISION VALIDATION

ITEM 'A1.2.1, A1.2.2, A1.2.3

Industrial Standard:

O-RINGS: VITON GLT AED

THIS REVISION NO.

Line Item #

BOLTING SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF VALVES BODY. BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING

Installation Orientation

SSH

CERTIFIED/DATE ENGG./DATE

(DESIGN AGENCY)

Enquiry n°: SA010-MR-005-Rev. A_012

Valve Type:

Pipe:

DESIGN CERTIFICATION

VALVES NOT IN FLARE ISOLATION SYSTEM SERVICES Tag No.

SOUR CRUDE OIL (3LE0P02)

SPECIAL NOTES SECTION

VALVE INSPECTION AND TESTING AS PER API 598

NO

DOC. 04-SAMSS-003 IS CONSIDERED AS NOT APPLICABLE NOR BEING REQUIRED ON MATERIAL REQUISITION

1. *Indicates information to be provided by vendor.

2. Valve shall comply with the requirement of SAES-L-108 and SAES-L-105 3. Valve shall be suitable for sour service (NACE MR175/ISO 15156)

BALL VALVE (RF #300)

DWG. TYPE

VALVE DATA SHEET

DAT

PIPELINE REHABILITATION PROJECT UTHMANIYAH

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.

THIS REVISION IS NOT TO BE USED FOR CONSTRUCTION UNTIL CERTIFIED AND DATED

VALVE DATA SHEET

Service:

JOB ORDER/EWO NO.

DATE REV. NO. OTHER REVIEW FOR KEY DRAWINGS

REQUIRED (SAUDI ARAMCO)

SAUDI ARABIAN OIL COMPANY

P. O. #

6/16/2019

REVISION DESCRIPTION

ISSUED FOR 100% PROJECT PROPOSAL

Saudi Aramco 6233-1-ENG (11/2010)

NOT BEING INDICATED WE HAVE SUPPOSED THAT ALL VALVES ARE FOR ABOVE GROUND SERVICE, ONSHORE INSTALLATION AND FOR MILD ATMOSPHERIC EXPOSURE

PLANT NO.

INDEX

DRAWING NO.

SHT. NO.

REV. NO.

282

L

PE-530101

026

C

SAUDI ARABIA EKRD/6233-1-1110.XLS

Notes To Purchaser: This form shall be used only for Direct Charge (DC) purchase requisitions and orders for valves in Class 04. Valves shall be in accordance with 04-SAMSS's -035, -048, at minimum, and other 04-SAMSS's as applicable. Service: VALVES NOT IN FLARE ISOLATION SYSTEM SERVICES

10-01196-0001

C

6/28/2018 6/16/2019

HHB

HDS

BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE

Industrial Standard:

BALL

API 6D

Sub Type:

SAMSS's (in addition to 04-SAMSS-035 & 04-SAMSS-048)

LONG PATTERN, FULL BORE, TRUNNION MOUNTED

04-SAMSS-051

Pressure Class:

Size / Port:

CLASS 300

26" AND ABOVE

End Connections:

Operator Type:

FLANGED RF AS PER ASME B 16.47 A Other:

Vendor References: S7100.T.SF.300

DOUBLE BLOCK AND BLEED

SAES-L-102

Firesafe:

Maximum Service Temperature

API 607 OR ISO 10497 AND NOT API-6FA

YES API 6FA

6/16/2019

JNK

6/16/2019

9COM 6000012420

170 °F -28 °F

Minimum Service Temperature

NO

O

O

O

O

( C or F) ( C or F)

MAOP: Valve Stem: VERTICAL VER / HOR

HOR / VER HORIZONTAL

AS PER ASME B 16.34 PRESSURE RATING

MATERIALS SECTION Body / Bonnel: A350 LF2 CL.1 (OBTAINED BY FORGING) WITH

Stem:

INTERNAL FBE COATING OR SS316L OVERLAY ON ASTM A216 WCB WITH FBE INTERNAL COATING AREA WHERE IS NOT FBE FEASEABLE

A479 Tp 316/316L (OBTAINED BY ROLLED BAR) SS316

Seat / Inserts:

SEAT UNIT: 'A182 F316/F316L (OBTAINED BY FORGING) SS316 WITH RTFE SEAT INSERTS INSERT: RPTFE

Wedge / Disc / Ball / Plug:

Packing / O-Rings:

Bolting:

A350 LF2 CL.1 (OBTAINED BY FORGING) WITH 3 mm 3316L

SS316 WELD OVERLAY ON ALL WETTED PARTS

STEM PACKING: VITON GLT AED PLUS GRAPHITE AS FIRE SAFE AS PER DOC. 04-SAMSS-051

BLT STUD W/2 HVY HEX NUT;ALLOY STL ASTM A193 GR A320 Gr. L7M \ A194 Gr. 7M (S3) B7M/ASTM A194 GR 2HM

Gaskets / Seals:

Coatings / Linings / Platings:

SEALS: VITON GLT AED GRAPHITE GASKETS SPIRAL WOUND SS 316 AND GRAPHITE FLR

INTERNAL FBEONLY, COATING (APCS-102B) STEEL PARTS NO COATING ON EXTERNAL PAINTING AS PER SAES-H-001 (APCS-26) SS316 COMPONENTS

Sour Service

Other:

YES DRAWING COMPLETION CERTIFICATE NO.

AND CERTIFICATION REQUIREMENTS, PER SAEP-334, UNDER

GEAR OPERATED

Installation Orientation

SSH

CERTIFIED/DATE ENGG./DATE

DESIGN CERTIFICATION

(DESIGN AGENCY) IS COVERED, FOR ALL APPROVAL

ITEM 'A2.1.1, A2.1.2

Valve Type:

O-RINGS: VITON FLEX GPHGLT PKGAED

REVISION VALIDATION

Line Item #

Enquiry n°: SA010-MR-005-Rev. A_012

BOLTING SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF VALVES BODY. BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER DESIGN SECTION DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING

Pipe:

THIS REVISION NO.

Tag No.

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.

THIS REVISION IS NOT TO BE USED FOR CONSTRUCTION UNTIL CERTIFIED AND DATED

VALVE DATA SHEET

SOUR CRUDE OIL (3LE0P02) JOB ORDER/EWO NO.

DATE REV. NO. OTHER REVIEW FOR KEY DRAWINGS

REQUIRED (SAUDI ARAMCO)

SAUDI ARABIAN OIL COMPANY

P. O. #

6/16/2019

REVISION DESCRIPTION

ISSUED FOR 100% PROJECT PROPOSAL

Saudi Aramco 6233-1-ENG (11/2010)

SPECIAL NOTES SECTION

APCS 26 ACC. TO SAES-H-001 ON CARBON

VALVE INSPECTION AND TESTING AS PER API 598

NO

DOC. 04-SAMSS-003 IS CONSIDERED AS NOT APPLICABLE NOR BEING REQUIRED ON MATERIAL REQUISITION NOT BEING INDICATED WE HAVE SUPPOSED THAT ALL VALVES ARE FOR ABOVE GROUND SERVICE,

1. *Indicates information to be provided by vendor.

2. Valve shall comply with the requirement of SAES-L-108 and SAES-L-105 ONSHORE INSTALLATION AND FOR MILD 3. Valve shall be suitable for sour service (NACE MR175/ISO 15156) ATMOSPHERIC EXPOSURE

BALL VALVE (RF #300)

DWG. TYPE

VALVE DATA SHEET

DAT

PIPELINE REHABILITATION PROJECT UTHMANIYAH

PLANT NO.

INDEX

DRAWING NO.

SHT. NO.

REV. NO.

282

L

PE-530101

027

C

SAUDI ARABIA EKRD/6233-1-1110.XLS

Notes To Purchaser: This form shall be used only for Direct Charge (DC) purchase requisitions and orders for valves in Class 04. Valves shall be in accordance with 04-SAMSS's -035, -048, at minimum, and other 04-SAMSS's as applicable.

10-01196-0001

C

6/16/2019

HDS

BY/DATE

DESIGN SECTION

Line Item #

Industrial Standard:

BALL

API 6D

Sub Type:

SAMSS's (in addition to 04-SAMSS-035 & 04-SAMSS-048)

LONG PATTERN, FULL BORE, FLOATING BALL

04-SAMSS-051

Pressure Class:

Size / Port:

CLASS 300

2" TO 3"

End Connections:

Operator Type:

FLANGED RF AS PER ASME B 16.5

LEVER OPERATED

6/16/2019

Firesafe:

6/16/2019

JNK

6/16/2019

S7100.SF.300

SAES-L-102

9COM 6000000239

Maximum Service Temperature

YES API 6FA

Minimum Service Temperature

HORIZONTAL HOR / VER

NO

170 °F -28 °F

O

O

O

O

( C or F) ( C or F)

MAOP:

VERTICAL Valve Stem: VER / HOR

AS PER ASME B 16.34 PRESSURE RATING

MATERIALS SECTION Body / Bonnel:

SSH

Vendor References:

API 607 OR ISO 10497 AND NOT API-6FA

Installation Orientation

A350 LF2 CL.1 WITHOUT ANY WELD OVERLAY

Stem:

A479 Tp 316/316L (OBTAINED BY ROLLED BAR)

ASTM A216 WCB

SS316

Seat / Inserts:

Wedge / Disc / Ball / Plug:

RTFE

SEAT UNIT: NOT APPLICABLE SEAT INSERT: RPTFE

A182 F316/F316L (OBTAINED BY

FORGING) SS316

Packing / O-Rings:

STEM PACKING: VITON GLT AED O-RINGS: FLEX GPHVITON PKG GLT AED PLUS GRAPHITE AS FIRE SAFE AS PER DOC. 04-SAMSS-051

Bolting:

A320 Gr. W/2 L7M \HVY A194HEX Gr. 7M (S3) BLT STUD NUT;ALLOY STL ASTM A193 GR B7M/ASTM A194 GR 2HM

Gaskets / Seals:

Coatings / Linings / Platings:

SEALS: VITON GLT AED GRAPHITE GASKETS SPIRAL WOUND SS 316 AND GRAPHITE FLR

EXTERNAL PAINTING AS PER SAES-H-001 (APCS-26) STEEL PARTS ONLY, NO COATING ON

Sour Service

Other:

YES DRAWING COMPLETION CERTIFICATE NO.

ITEM 'A3.1.1, A3.2.1, A3.3.1

BOLTING SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF VALVES BODY. BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING

Other:

HHB

CONST. AGENCY/DATE OPERATIONS/DATE CERTIFIED/DATE ENGG./DATE AND CERTIFICATION REQUIREMENTS, PER SAEP-334, UNDER

DESIGN CERTIFICATION

(DESIGN AGENCY) IS COVERED, FOR ALL APPROVAL

REVISION VALIDATION

Enquiry n°: SA010-MR-005-Rev. A_012

Valve Type:

Pipe:

THIS REVISION NO.

VALVES NOT IN FLARE ISOLATION SYSTEM SERVICES Tag No.

SOUR CRUDE OIL (3CS1P02)

SPECIAL NOTES SECTION

APCS 26 ACC. TO SAES-H-001 ON CARBON

SS316 COMPONENTS

VALVE INSPECTION AND TESTING AS PER API 598

NO

DOC. 04-SAMSS-003 IS CONSIDERED AS NOT APPLICABLE NOR BEING REQUIRED ON MATERIAL REQUISITION

1. *Indicates information to be provided by vendor.

2. Valve shall comply with the requirement of SAES-L-108 and SAES-L-105 3. Valve shall be suitable for sour service (NACE MR175/ISO 15156)

BALL VALVE (RF #300)

DWG. TYPE

VALVE DATA SHEET

DAT

PIPELINE REHABILITATION PROJECT UTHMANIYAH

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.

THIS REVISION IS NOT TO BE USED FOR CONSTRUCTION UNTIL CERTIFIED AND DATED

VALVE DATA SHEET

Service:

JOB ORDER/EWO NO.

DATE REV. NO. OTHER REVIEW FOR KEY DRAWINGS

REQUIRED (SAUDI ARAMCO)

SAUDI ARABIAN OIL COMPANY

P. O. #

6/16/2019

REVISION DESCRIPTION

ISSUED FOR 100% PROJECT PROPOSAL

Saudi Aramco 6233-1-ENG (11/2010)

NOT BEING INDICATED WE HAVE SUPPOSED THAT ALL VALVES ARE FOR ABOVE GROUND SERVICE, ONSHORE INSTALLATION AND FOR MILD ATMOSPHERIC EXPOSURE

PLANT NO.

INDEX

DRAWING NO.

SHT. NO.

REV. NO.

282

L

PE-530101

031

C

SAUDI ARABIA EKRD/6233-1-1110.XLS

Notes To Purchaser: This form shall be used only for Direct Charge (DC) purchase requisitions and orders for valves in Class 04. Valves shall be in accordance with 04-SAMSS's -035, -048, at minimum, and other 04-SAMSS's as applicable. Service: VALVES NOT IN FLARE ISOLATION SYSTEM SERVICES

10-01196-0001

C

6/16/2019 6/16/2019

HHB

HDS

BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE

BALL

API 6D

Sub Type:

SAMSS's (in addition to 04-SAMSS-035 & 04-SAMSS-048)

LONG PATTERN, FULL BORE, TRUNNION MOUNTED

04-SAMSS-051

Pressure Class:

Size / Port:

CLASS 300

4" TO 24"

End Connections:

Operator Type:

FLANGED RF AS PER ASME B 16.5

GEAR OPERATED

Other:

Vendor References: S7100.T.SF.300

DOUBLE BLOCK AND BLEED

SAES-L-102

API 607 OR ISO 10497 AND NOT API-6FA

Firesafe:

YES API 6FA

6/16/2019

JNK

6/16/2019

170 °F -28 °F

Minimum Service Temperature

NO VERTICAL

HORIZONTAL HOR / VER

9COM 6000000250

Maximum Service Temperature

Valve Stem: VER / HOR

O

O

O

O

( C or F) ( C or F)

MAOP:

AS PER ASME B 16.34 PRESSURE RATING

MATERIALS SECTION Body / Bonnel: A350 LF2 CL.1 PLUS 3 mm SS316L WELD OVERLAY

Stem:

ASTM A216 WCB

SS316

Seat / Inserts:

Wedge / Disc / Ball / Plug:

ON CRITICAL AREAS ONLY

A479 Tp 316/316L (OBTAINED BY ROLLED BAR)

SEAT UNIT: 'A182 F316/F316L (OBTAINED BY FORGING) SS316 WITH RTFE INSERTS SEAT INSERT: RPTFE Packing / O-Rings:

A351 CF8M (OBTAINED BY CAST)

SS316

STEM PACKING: VITON GLT AED PLUS GRAPHITE AS FIRE SAFE AS PER DOC. 04-SAMSS-051

Bolting:

Gr.W/2 L7MHVY \ A194 Gr.NUT;ALLOY 7M (S3) BLTA320 STUD HEX STL ASTM A193 GR B7M/ASTM A194 GR 2HM

Gaskets / Seals:

Coatings / Linings / Platings:

SEALS: VITON GLT AED GRAPHITE GASKETS SPIRAL WOUND SS 316 AND GRAPHITE FLR

STEEL PARTS ONLY, NO ON EXTERNAL PAINTING ASCOATING PER SAES-H-001 (APCS-26)

Sour Service

Other:

YES DRAWING COMPLETION CERTIFICATE NO.

AND CERTIFICATION REQUIREMENTS, PER SAEP-334, UNDER

IS COVERED, FOR ALL APPROVAL

ITEM 'A1.3.1

Industrial Standard:

O-RINGS: VITON GLT AED FLEX GPH PKG

REVISION VALIDATION

Line Item #

Valve Type:

Installation Orientation

SSH

CERTIFIED/DATE ENGG./DATE

(DESIGN AGENCY)

DESIGN CERTIFICATION

Enquiry n°: SA010-MR-005-Rev. A_012

BOLTING SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF VALVES BODY. BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER DESIGN SECTION DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING

Pipe:

THIS REVISION NO.

Tag No.

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.

THIS REVISION IS NOT TO BE USED FOR CONSTRUCTION UNTIL CERTIFIED AND DATED

VALVE DATA SHEET

SOUR CRUDE OIL (3CS1P02) JOB ORDER/EWO NO.

DATE REV. NO. OTHER REVIEW FOR KEY DRAWINGS

REQUIRED (SAUDI ARAMCO)

SAUDI ARABIAN OIL COMPANY

P. O. #

6/16/2019

REVISION DESCRIPTION

ISSUED FOR 100% PROJECT PROPOSAL

Saudi Aramco 6233-1-ENG (11/2010)

SPECIAL NOTES SECTION

APCS 26 ACC. TO SAES-H-001 ON CARBON SS316 COMPONENTS

VALVE INSPECTION AND TESTING AS PER API 598

NO

DOC. 04-SAMSS-003 IS CONSIDERED AS NOT APPLICABLE NOR BEING REQUIRED ON MATERIAL REQUISITION NOT BEING INDICATED WE HAVE SUPPOSED THAT ALL VALVES ARE FOR ABOVE GROUND SERVICE,

1. *Indicates information to be provided by vendor.

2. Valve shall comply with the requirement of SAES-L-108 and SAES-L-105 ONSHORE INSTALLATION AND FOR MILD ATMOSPHERIC EXPOSURE 3. Valve shall be suitable for sour service (NACE MR175/ISO 15156)

BALL VALVE (RF #300)

DWG. TYPE

VALVE DATA SHEET

DAT

PIPELINE REHABILITATION PROJECT UTHMANIYAH

PLANT NO.

INDEX

DRAWING NO.

SHT. NO.

REV. NO.

282

L

PE-530101

032

C

SAUDI ARABIA EKRD/6233-1-1110.XLS

Notes To Purchaser: This form shall be used only for Direct Charge (DC) purchase requisitions and orders for valves in Class 04. Valves shall be in accordance with 04-SAMSS's -035, -048, at minimum, and other 04-SAMSS's as applicable. Service: VALVES NOT IN FLARE ISOLATION SYSTEM SERVICES

10-01196-0001

C

6/16/2019 6/16/2019

HHB

HDS

BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE

DESIGN SECTION

BALL

API 6D

Sub Type:

SAMSS's (in addition to 04-SAMSS-035 & 04-SAMSS-048)

LONG PATTERN, FULL BORE, TRUNNION MOUNTED

04-SAMSS-051

Pressure Class:

Size / Port:

CLASS 600

4" TO 24"

End Connections:

Operator Type:

FLANGED RF AS PER ASME B 16.5 Other:

Vendor References:

S7100.T.SF.600

DOUBLE BLOCK AND BLEED

SAES-L-102

9COM 6000000250

Firesafe:

Maximum Service Temperature

API 607 OR ISO 10497 AND NOT API-6FA

YES API 6FA

6/16/2019

JNK

6/16/2019

170 °F -28 °F

Minimum Service Temperature

NO

O

O

O

O

( C or F) ( C or F)

MAOP:

VERTICAL Valve Stem: VER / HOR

HOR / VER HORIZONTAL

AS PER ASME B 16.34 PRESSURE RATING

MATERIALS SECTION Body / Bonnel:

Stem:

ASTM A216 WCB

A479 Tp 316/316L (OBTAINED BY ROLLED BAR) SS316

Seat / Inserts:

Wedge / Disc / Ball / Plug:

Packing / O-Rings:

Bolting:

A350 LF2 CL.1 PLUS 3 mm SS316L WELD OVERLAY ON CRITICAL AREAS ONLY

SEAT UNIT: 'A182 F316/F316L BY FORGING) SS316 WITH(OBTAINED RTFE INSERTS SEAT INSERT: RPTFE

A351 CF8M (OBTAINED BY CAST) SS316

STEM PACKING: VITON GLT AED PLUS GRAPHITE AS FIRE SAFE AS PER DOC. 04-SAMSS-051

Gaskets / Seals:

A320 Gr. L7M \ A194 7M (S3) BLT STUD W/2 HVY HEXGr. NUT;ALLOY STL ASTM A193 GR B7M/ASTM A194 GR 2HM Coatings / Linings / Platings:

APCS 26 ACC. TO SAES-H-001 ON CARBON

SEALS: VITON GLT AED

SPIRAL WOUND SS 316 AND GRAPHITE FLR GRAPHITE GASKETS

STEEL PARTS ONLY, NO ON EXTERNAL PAINTING AS COATING PER SAES-H-001 (APCS-26)

Sour Service

Other:

YES DRAWING COMPLETION CERTIFICATE NO.

AND CERTIFICATION REQUIREMENTS, PER SAEP-334, UNDER

GEAR OPERATED

Installation Orientation

SSH

CERTIFIED/DATE ENGG./DATE

DESIGN CERTIFICATION

(DESIGN AGENCY) IS COVERED, FOR ALL APPROVAL

ITEM 'A1.1.1

BOLTING SHALL BE ZINC PLATED BICHROMATED IN ACCORDANCE TO B633-FEZN12 SC.3 FINISH COLOR CHROMATE TREATMENT TYPE II (ISO4042-12C FE OR ASTM F871 ) AND PAINTED WITH SAME PAINTING CYCLE OF VALVES BODY. BEING BOLTING PAINTED WE CONSIDER GALVANISING AND/OR FLOUROPOLIMER COATING AS PER DOC. SAES-H-001 SECTION 7.1.G AS NOT NECESSARY BEING APPLICABLE TO UNPROTECTED BOLTING Industrial Standard:

O-RINGS: VITON GLT AED FLEX GPH PKG

REVISION VALIDATION

Line Item #

Enquiry n°: SA010-MR-005-Rev. A_012

Valve Type:

Pipe:

THIS REVISION NO.

Tag No.

SPECIAL NOTES SECTION

SS316 COMPONENTS

VALVE INSPECTION AND TESTING AS PER API 598

NO

DOC. 04-SAMSS-003 IS CONSIDERED AS NOT APPLICABLE NOR BEING REQUIRED ON MATERIAL REQUISITION

1. *Indicates information to be provided by vendor.

2. Valve shall comply with the requirement of SAES-L-108 and SAES-L-105 3. Valve shall be suitable for sour service (NACE MR175/ISO 15156)

BALL VALVE (RF #600)

DWG. TYPE

VALVE DATA SHEET

DAT

PIPELINE REHABILITATION PROJECT UTHMANIYAH

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.

THIS REVISION IS NOT TO BE USED FOR CONSTRUCTION UNTIL CERTIFIED AND DATED

VALVE DATA SHEET

SOUR CRUDE OIL (6CS1P02) JOB ORDER/EWO NO.

DATE REV. NO. OTHER REVIEW FOR KEY DRAWINGS

REQUIRED (SAUDI ARAMCO)

SAUDI ARABIAN OIL COMPANY

P. O. #

6/16/2019

REVISION DESCRIPTION

ISSUED FOR 100% PROJECT PROPOSAL

Saudi Aramco 6233-1-ENG (11/2010)

NOT BEING INDICATED WE HAVE SUPPOSED THAT ALL VALVES ARE FOR ABOVE GROUND SERVICE, ONSHORE INSTALLATION AND FOR MILD ATMOSPHERIC EXPOSURE

PLANT NO.

INDEX

DRAWING NO.

SHT. NO.

REV. NO.

282

L

PE-530101

035

C

SAUDI ARABIA EKRD/6233-1-1110.XLS

07/21/2021

BALL VALVES - MANUAL 01196-SICIM-MR-005

SUBMISSION DATES OF REQUIRED DOCUMENTATION SHALL BE DISCUSSED AND AGREEDED AFTER ORDER PLACEMENT DURING KICK OFF MEETING OR BEFORE ORDER DURING FINAL COMMERCIAL NEGOTATION BASED ON REQUIRED DELIVERY AND WORKLOAD OF DOCUMENTATION DEPARTMENT. HARD COPIES SHALL BE SUBMITTED DURING PHASE 603 ONLY