Protego Flame Arrestor, Breather Valve Data Sheet [PDF]

Zitiervorschau

FLAME ARRESTOR / BREATHER VALVE DATA SHEET

GENERAL Tag no Quantity Equipment no FLAME ARRESTOR Type

End of line / Inline Deflagration or If inline Detonation If inline distance of ignition source Mtrs from Flame Arrestor Size if any mm Flow rate m3/hr mbar/mm Acceptable pressure drop WC Flame arrestor standard Material of construction PROCESS FLUID INFORMATION Name of the fluid (Service) Explosion group if any Flash point Molecular Weight Vapour Density Operating temperature Operating pressure TANK DETAILS Type of the Tank (Vertical or Horizontal) Tank Dimensions - Diameter x Height Tank Design pressure / Vacuum TOTAL OUT-BREATHING Pumping In rate Fluid movement Thermal Out-breathing Rate Total out-breathing ( fluid movement + Thermal outbreathing) TOTAL IN-BREATHING Pumping out rate Fluid movement Thermal In-breathing Rate Total Inbreathing ( Fluid movement + Thermal inbreathing) SETTING – BREATHER VALVE % over pressure Material Of construction

As per EN 12874 / ISO 16852 Housing: Flame Filters:

IIA/IIB3/IIC 0 C K mol kg/m3 Deg C Bar G

mtrs

Dia:

Height :

Kg/cm2 G

m3/hr m3/hr m3/hr m3/hr

m3/hr m3/hr m3/hr m3/hr mm WC / mbar %

Set Pressure:

Set Vacuum:

Pressure:

Vacuum:

Housing:

Seat:

Pallets:

NOTES: 1. Type test certificate MUST BE SUBMITTED WITH BID AS PER STANDAND EN12874 / ISO16852. 2. Third party approved flow capacity chart must be submitted with the BID/OFFER for flame arrestor and breather valve