65 0 299KB
Global standards used locally worldwide List of ISO TC67 standards and their status with API, CEN and various regional and national standards developing organizations September 2016 This report is a revision of the OGP Report No. 4210. August 2011
Table of Contents Table of Contents .................................................................................................................................. 2 Publications ........................................................................................................................................... 3 Presentation of the list ........................................................................................................................... 5 Global List of Standards ……………………………………………………………………………………….7
Disclaimer Whilst every effort has been made to ensure the accuracy of the information contained in this publication, neither ISO, ISO/TC 67 nor any of its members past present or future warrants its accuracy or will, regardless of its or their negligence, assume liability for any foreseeable or unforeseeable use made thereof, which liability is hereby excluded. Consequently, such use is at the recipient’s own risk on the basis that any use by the recipient constitutes agreement to the terms of this disclaimer. The recipient is obliged to inform any subsequent recipient of such terms. The document is made available for information purposes only.
Publications Global experience The Oil & Gas Industry has access to a wealth of technical knowledge and experience with its members operating around the world in many different terrains. This valuable knowledge for the industry is collated and distilled to use as Global standards used locally worldwide. The foremost aim of international standardization is to facilitate the exchange of goods and services through the elimination of technical barriers to trade. The ISO Technical Committee 67 - "Materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries" – (ISO/TC 67) has the responsibility of establishing standards for most capital equipment used in all streams of the Oil & Gas Industry. The ISO/TC 67 standards also provide common health, safety and environmental requirements. This equipment is the hardware portion used for exploration, production, transportation, and processing of liquid and gaseous hydrocarbons within the petroleum, petrochemical and natural gas industries, and refining of crude oil or natural gas products. The following political, economic, technical, regulatory, legal and social dynamics describe the business environment of the industry sector, products, materials, disciplines or practices related to the scope of ISO/TC 67, and they may significantly influence how the relevant standards development processes are conducted and the content of the resulting standards: The petroleum, petrochemical and natural gas industries is a major industry in most countries' economies. It is one of the major suppliers of energy for the entire world. The industry is involved in the Gross National Product as production/supply or in usage, or both. Petroleum and natural gas provide fuel for heating, lighting, transportation, and mechanization of most of the world. Petrochemical products provide everything from fabrics, plastic, and tyres, to soft drink/water bottles, lubricants, fertilizers, and medicines. The constancy of supply is integral to the functioning of the world economy, and equipment standardized by ISO/TC67 is necessary to assure that supply. Consistent high quality standards With the international standards developed by ISO/TC 67, the need for regional, national or company specifications is reduced, manufacturing and inventory costs are minimized, and regulatory authorities are able to incorporate these standards by reference rather than by restating requirements in regulations. International Standards are the backbone of our society, ensuring the safety and quality of products and services, facilitating international trade and improving the environment in which we live in. Conformity to International Standards helps reassure consumers that products, systems and organizations are safe, reliable and good for the environment. ISO standards can also remove barriers
to world trade by providing the technical basis on which political trade agreements can be put into practice, whether they are at the regional or international level. The adoption of standards is entirely voluntary, but companies estimate savings in the millions (U.S. dollars) through having a common set of agreed standards. Numerous studies have shown that standards boost business and economies. The oil and gas industry recognises the need to develop consistent standards. Oil and gas operators, product and service supply organizations in the industry and other interested parties are encouraged to use the standards as a starting point for their operations or to supplement their own policies and regulations which can apply locally. More about the benefits of International Standards can be found on the ISO website.
Presentation of the list The vision of the petroleum, petrochemical and natural gas industries standards effort in ISO/TC 67 is global standards used locally worldwide. The purpose of this report is to show where we are in this vision, i.e. which countries have adopted the ISO/TC 67 standards. This report will be periodically updated to show the progress of the standards development and adoption process. The date of update of the information per region/country is mentioned in the list. For up to date information, please consult the public websites of each of the standards development organisations mentioned herein. The list will be available as hardcopy as well as an electronic copy via the ISO/TC 67 website This report focuses on the ISO/TC67 standards only. There are many other standards available for use by the Oil & & Gas industry, developed by ISO or other standards developing organizations like API, CEN, GOST and GSO. References are made to the public websites of these organisations. ISO title and ISO column The basis of this report is the complete list of published ISO/TC 67 standards, including Joint Working Groups (JWG). These standards are developed together with ISO/TC 60/SC2 “Gear capacity calculation”, ISO/TC 115/SC3 “Installation and special application of pumps”, ISO/TC 118/SC 1 “Process compressors”, ISO/TC 153 “Valves" and ISO/TC 192 “Gas turbines”. The list also shows the current edition and whether there are technical and/or amendments issued with the International Standard. The adopted JWG standards in the list might not represent the latest information but will be updated in the next version. ABNT – Brazil column This column shows which standards are adopted and published by ABNT as NBR, national Brazilian standard. API – USA column This column shows the API standards which have already been re-adopted from the ISO standards. Some state "MOD"; this indicates that there have been some technical changes from the ISO document, whilst those marked “IDT” are identical adoptions. Also note that all national adoptions are, by definition, American National Standards (ANSI). Some of the indicated documents in the API column are issued by another standards developing organization (e.g. NACE). GOST R – Russian Federation column: This column shows which standards are adopted and published by GOST R as Russian standards.
CSA - Canada column This column shows which standards are adopted and published by CSA as national Canadian standard. If CSA has not adopted the remaining ISO standards in the list into Canada’s national standards system, that doesn’t necessarily mean that they are not in use. CEN – Europe column It is important to note that the EN standards are also published as national standards in all the 33 European countries members of CEN preferably within 6 months of the publication as EN. The standards listed are technically identical to the corresponding ISO ones (these standards are numbered EN ISO XXXXX); they were accepted in Europe either through the parallel vote procedure or by Unique Acceptance Procedure within the Vienna Agreement between CEN and ISO (ISO lead). All documents are part of the work programme of CEN/TC 12 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries”, except some which belong to CEN/TC 69 “Industrial valves”, CEN/TC 282 “Installation and equipment for LNG” or ECISS/TC 110 “Steel tubes, and iron and steel fittings. Some of them (developed by ISO/TC 67/SC2) have a different number in CEN because, if the technical content is identical, their scope in Europe excludes the gas infrastructure industries; they nevertheless have in their title the reference to the ISO initial standards with the indication: (modified). Note that in the EN document the main body of the standard is identical to the ISO one, with a cover page added to the ISO standard. GB – China column: The Chinese number of the ISO adopted standard is different from the ISO one. China adopts ISO standards in different ways: Identical (IDT), Modified (MOD) and a small number as Not equivalent (NEQ). ST RK – Kazakhstan column: Kazakhstan adopts the ISO standards in three different ways: Identical (IDT), Modified (MOD) and a small number as Not equivalent (NEQ). GSO – Gulf States column This column concerns an additional regional group of countries that are adopting (identical or modified) ISO/TC67 standards. GSO is the Gulf Standardization Organization for the Cooperation Council for the Arab States of the Gulf. GSO currently includes 7 countries: Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, United Arab Emirates and Yemen. Once a standard is adopted by GSO, it is then automatically adopted by the member countries of the Gulf Standards Organization, similar to the CEN process.
N214 ISO/TC 67 overview ISO/TC 67 Chair
Management Committe
Secretariat NEN
SC2 Pipeline transportation systems
SC6 Processing equipment and syste ms
WG2 Conformity assessment
WG8 Materials, corrosion control, welding and NDE
SC3 Drilling and completion fluids, and well cements
SC7 Offshore Structures
WG4 Reliability engineering, and technology
WG11 Coating and lining of structures & equipment
SC4 Drilling and production equipment
SC8 Arctic Operations
WG5 Aluminium alloy pipes
WG11 WG12 Coating and lining C0 aspects 2 of structures & equipment
SC5 Casing, tubing And drill pipe
SC9 Liquefied natural gas installations and equipment
WG7 Materials for use in H2S containing environments
ISO
Edition
ISO 10425:2003
ed. 1
ISO 13709:2009
ed. 2
ISO 13710:2004
ed. 1
ISO 21049:2004
Amd
Cor
Revision of
Document title
TC
Steel wire ropes for the petroleum and natural gas industries -Minimum requirements and terms of acceptance
TC 105
WG
Liason TC 67
JWG
SC 6
Centrifugal pumps for petroleum, petrochemical and natural gas industries
TC 115
Petroleum, petrochemical and natural gas industries -Reciprocating positive displacement pumps
TC 115
SC 3
JWG 1
SC 6
ST RK ISO 13709:2004 (ISO 13707:2003 IDT)
SC 3
JWG 2
SC 6
ST RK ISO 13710:2006 (ISO 13710:2004 IDT)
ed. 1
Pumps -- Shaft sealing systems for centrifugal and rotary pumps
TC 115
SC 3
JWG 2
SC 6
ISO 10439:2002
ed. 1
Petroleum, chemical and gas service industries -- Centrifugal compressors
TC 118
SC 1
JWG 1
SC 6
ISO 10439-1:2015
ed. 1
ISO 10439:2002
Petroleum, petrochemical and natural gas industries -- Axial and centrifugal compressors and expander-compressors -- Part 1: General requirements
TC 118
SC 1
JWG 1
SC 6
EN ISO 10439-1:2015
ISO 10439-2:2015
ISO 10439-3:2015
ed. 1
ISO 10439:2002
Petroleum, petrochemical and natural gas industries -- Axial and centrifugal compressors and expander-compressors -- Part 2: Non-integrally geared centrifugal and axial compressors
TC 118
SC 1
JWG 1
SC 6
EN ISO 10439-2:2015
ed. 1
ISO 10439:2002
Petroleum, petrochemical and natural gas industries -- Axial and centrifugal compressors and expander-compressors -- Part 3: Integrally geared centrifugal compressors
TC 118
SC 1
JWG 1
SC 6
EN ISO 10439-3:2015
ISO 10439-4:2015
ed. 1
ISO 10439:2002
Petroleum, petrochemical and natural gas industries -- Axial and centrifugal compressors and expander-compressors -- Part 4: Expander-compressors
TC 118
SC 1
JWG 1
SC 6
ISO 10442:2002
ed. 1
Petroleum, chemical and gas service industries -- Packaged, integrally geared centrifugal air compressors
TC 118
SC 1
JWG 1
SC 6
ST RK 10442:2004 10442:2002 IDT)
ISO 13631:2002
ed. 1
Petroleum and natural gas industries -- Packaged reciprocating gas compressors
TC 118
SC 1
JWG 2
SC 6
ST RK ISO 13631:2004 (ISO 13631:2002 IDT)
ISO 13707:2000
ed. 1
Petroleum and natural gas industries -- Reciprocating compressors
TC 118
SC 1
JWG 2
SC 6
ST RK ISO 13707:2004 (ISO 13707:2000 IDT)
ISO 10440-1:2007
ed. 2
Petroleum, petrochemical and natural gas industries -- Rotarytype positive-displacement compressors -- Part 1: Process compressors
TC 118
SC 1
JWG 3
SC 6
ST RK ISO 10440-1: 2004 (ISO 10440-1:2000 IDT) ST RK ISO 10440-2: 2004 (ISO 10440-2:2001 IDT)
ISO 13709:2003
ISO 10440-1:2000
SC
ABNT - Brazil (update in Q3 2015)
ST RK - Kazakhstan (updated in Q3 2014)
API - USA (updated in Q1 2016)
CEN - Europe (updated in Q3 2015)
CSA - Canada (updated in Q3 2015)
GB/T - China (updated in Q1 2015)
GOST R - Russia (updated in Q1 2016)
GSO - Gulf (updated in 2011)
API Spec 9A 25th ed. ISO 10425: 2003 (IDT) API Std 610 11th edition EN ISO 13709:2009 EN ISO 13710:2004 API Std 682:2004/ ISO 21049:2004 (IDT) ST RK ISO 10439:2004 (ISO 10439:2002 IDT)
EN ISO 21049:2004 [revised and split in four parts]
EN ISO 10439-4:2015
(ISO
EN ISO 10442:2002 EN ISO 13631:2002
[status: abandoned] API Std 619 5th edition
GOST R ISO 13631:2002- Rus. TC 023 GB/T 20322-2006 ISO 13707 : 2000 MOD
ISO 13707 : 2000
EN ISO 10440-1:2007
ISO 10440-2:2001
ed. 1
Petroleum and natural gas industries -- Rotary-type positivedisplacement compressors -- Part 2: Packaged air compressors (oil-free)
TC 118
SC 1
JWG 3
SC 6
ISO 17292:2015
ed. 2
ISO 17292:2004
Metal ball valves for petroleum, petrochemical and allied industries
TC 153
SC 1
JWG
SC 6
ISO 10434:2004
ed. 2
ISO 10434:1998
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
TC 153
SC 1
JWG 1
SC 6
ST RK ISO 10434:2006 (ISO 10434:2004 IDT)
API 600 12th edition / ISO 10434:2001 (MOD)
ISO 15761:2002
ed. 1
Steel gate, globe and check valves for sizes DN 100 and smaller, TC 153 for the petroleum and natural gas industries
SC 1
JWG 1
SC 6
ST RK 15761:2004 15761:2002 IDT)
API Std 602 8th ed. EN ISO 15761:2002 / ISO 15761:2002 (MOD)
ISO 10497:2010
ed. 3
ISO 10497:2004; ISO 10497:1992
Testing of valves -- Fire type-testing requirements
TC 153
SC 1
JWG 6
SC 6
ISO 3977-3:2004
ed. 2
ISO 3977-3:2002
Gas turbines -- Procurement -- Part 3: Design requirements
TC 192
SC 6
WG 4
SC 6
ISO 3977-5:2001
ed. 1
Gas turbines -- Procurement -- Part 5: Applications for petroleum and natural gas industries
TC 192
SC 6
WG 4
SC 6
ISO 3977-7:2002
ed. 1
Gas turbines -- Procurement -- Part 7: Technical information
TC 192
SC 6
WG 4
SC 6
ISO 3977-8:2002
ed. 1
Gas turbines -- Procurement -- Part 8: Inspection, testing, installation and commissioning
TC 192
SC 6
WG 4
SC 6
ISO 13691:2001
ed. 1
Petroleum and natural gas industries -- High-speed specialpurpose gear units
TC 60
SC 2
JWG
SC 6
ISO 15590-1:2009
ed. 2
Petroleum and natural gas industries -- Induction bends, fittings TC 67 and flanges for pipeline transportation systems -- Part 1: Induction bends
SC 2
WG 10
ST RK ISO 15590-1:2011 (ISO 15590-1:2009, IDT)
EN 14870-1:2011 [ISO 15590-1:2009 modified]
GB/T 29168.1-2012 MOD
GSO ISO 15590-1:2010
ISO 15590-2:2003
ed. 1
Petroleum and natural gas industries -- Induction bends, fittings and flanges for pipeline transportation systems -- Part 2: Fittings
TC 67
SC 2
WG 10
ST RK ISO 15590-2:2007 (ISO 15590-2:2003, IDT)
EN 14870-2:2004 [ISO 15590-2:2003 modified]
GB/T 29168.2-2012 MOD
GSO ISO 15590-2:2008
ISO 15590-3:2004
ed. 1
Petroleum and natural gas industries -- Induction bends, fittings and flanges for pipeline transportation systems -- Part 3: Flanges
TC 67
SC 2
WG 10
ST RK ISO 15590-3:2007 (ISO 15590-3:2004, IDT)
EN 14870-3:2004 [ISO 15590-3:2004 modified)
GB/T 29168.3-2012 MOD
GSO ISO 15590-3 : 2008
ISO 15589-1:2015
ed. 2
ISO 15589-1:2003
Petroleum and natural gas industries -- Cathodic protection of pipeline transportation systems -- Part 1: On-land pipelines
TC 67
SC 2
WG 11
ST RK ISO 15589-1:2010 (ISO 15589-1:2003, IDT)
[scope of CEN/TC 219]
ISO 15589-1:2003 NEQ
GSO ISO 15589-1:2008
ISO 15589-2:2012
ed. 2
ISO 15589-2:2004
Petroleum, petrochemical and natural gas industries -- Cathodic protection of pipeline transportation systems -- Part 2: Offshore pipelines
TC 67
SC 2
WG 11
ST RK ISO 15589-2:2007 (ISO 15589-2:2004, IDT)
ISO 16708:2006
ed. 1
Petroleum and natural gas industries -- Pipeline transportation systems -- Reliability-based limit state methods
TC 67
SC 2
WG 12
ST RK ISO 16708:2008 (ISO 16708:2006, IDT)
EN ISO 16708:2006
ISO 16708:2006 IDT
GSO ISO 16708:2008
ISO 13623:2009
ed. 2
Petroleum and natural gas industries -- Pipeline transportation systems
TC 67
SC 2
WG 13
ST RK ISO 13623:2010 (ISO 13623:2009, IDT); СНиП РК 3.0501-2010; ST RK 1916-2009
EN 14161:2011 + A1:2015 [ISO 13623:2009 modified]
ISO 13623:2009 MOD
GSO ISO 13623:2008
ISO 21809-1:2011
ed. 1
Petroleum and natural gas industries -- External coatings for TC 67 buried or submerged pipelines used in pipeline transportation systems -- Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
SC 2
WG 14
EN ISO 21809-1:2011 [under ECISS/TC 110]
ISO 21809-1:2011
ISO 21809-2:2014
ed. 2
ISO 21809-2:2007
Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 2: Single layer fusion-bonded epoxy coatings
TC 67
SC 2
WG 14
ST RK ISO 21809-2:2010 (ISO 21809-2:2007, IDT)
(National Adoption under EN ISO 21809-2:2014 committee consideration) [under ECISS/TC 110]
ISO 21809-2:2007
GOST R ISO 21809-2- GSO ISO 21809-2:2008 2015 (ISO 21809+COR1 2:2007, IDT), TC 357
ISO 21809-3:2016
ed. 2
ISO 21809-3:2008
Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 3: Field joint coatings
TC 67
SC 2
WG 14
ST RK ISO 21809-3:2010 (ISO 21809-3:2008, IDT)
[scope of ECISS/TC 110]
ISO 21809-3:2008
GSO ISO 21809-3:2008
ISO 21809-4:2009
ed. 1
Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 4: Polyethylene coatings (2-layer PE)
TC 67
SC 2
WG 14
ST RK ISO 21809-4:2010 (ISO 21809-4:2009, IDT)
[scope of ECISS/TC 110]
GSO ISO 21809-4:2011
ISO 21809-5:2010
ed. 1
Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 5: External concrete coatings
TC 67
SC 2
WG 14
ST RK ISO 21809-5:2012 (ISO 21809-5:2010, IDT)
EN ISO 21809-5:2010 [under ECISS/TC 110)]
GSO ISO 21809-5 : 2010
Petroleum and natural gas industries -- Pipeline transportation systems -- Test procedures for mechanical connectors
TC 67
SC 2
WG 15
ST RK ISO 21329:2007 (ISO 21329:2004, IDT)
Petroleum and natural gas industries -- Steel pipe for pipeline transportation systems
TC 67
SC 2
WG 16
ST RK ISO 3183:2011 (ISO 3183:2007, IDT); GOST ISO 3183-2012 (ISO 3183:2007, IDT) ST RK ISO/ТУ 24817:2010 (ISO/TS 24817:2006, IDT)
ISO 15590-1:2001
ISO 13623:2000
Cor 1:2008
(ISO
GB/T 12237-2007 ISO 17292:2004 NEQ
EN ISO 10434:2004 [under CEN/TC 69]
GB/T 12234-2007 ISO 10434:2004 EQV
ST CKBA 001-2003 (GOST R in plan 2013)
EN ISO 3977-5:2003 + COR1:2007
EN ISO 13691:2002
ed. 1
ISO 3183:2012
ed. 3
ISO/TS 12747:2011
ed. 1
Petroleum and natural gas industries -- Pipeline transportation systems -- Recommended practice for pipeline life extension
TC 67
SC 2
WG 17
ISO 12490:2011
ed. 1
Petroleum and natural gas industries -- Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
TC 67
SC 2
WG 18
ISO 12736:2014
ed. 1
Petroleum and natural gas industries -- Wet thermal insulation TC 67 coatings for pipelines, flow lines, equipment and subsea structures
SC 2
WG 19
ISO 14313:2007
ed. 2
ISO 14313:1999
Petroleum and natural gas industries -- Pipeline transportation systems -- Pipeline valves
TC 67
SC 2
WG 2
ST RK ISO 14313:2012 (ISO 14313:2007, IDT)
ISO 13847:2013
ed. 2
ISO 13847:2000
Petroleum and natural gas industries -- Pipeline transportation systems -- Welding of pipelines
TC 67
SC 2
WG 8
ST RK ISO 13847:2012 (ISO 13847:2000, IDT)
IS
EN ISO 17292:2004 [under CEN TC/69]
API Std 607 5th edition / EN ISO 10497:2010 ISO 10497 [under CEN/TC 69]
ISO 21329:2004
ISO 3183:1980;
EN ISO 10440-2:2001
NACE SP0115-2015/ISO EN ISO 15589-2:2014 15589-2:2012 [under CEN/TC 219]
GSO ISO 15589-2:2008
EN ISO 21329:2004 API 5L, 45th ed. 2012 (MOD) + Errata 1:2015
GSO ISO 21329:2008
EN ISO 3183:2012 [under ECISS/TC 110]
GB/T 9711 IDT Under Revision
CEN ISO/TS 12747:2013
ISO/TS 12747:2011 IDT
Adopted previous ISO GSO ISO 3183:2008 3183 revision in 3 parts -1, -2, -3, IDT GSO ISO 12747:2012
prEN ISO 12490 [status: abandoned] EN ISO 12736:2014 API Spec 6D, 24th ed.:2014 (MOD)
EN 13942:2009 + AC:2009 [ISO 14313:2007 modified] [latest edition not adopted | EN 14163:2001 + AC:2006 (ISO 13847:2000 modified)]
ISO 14313:2007 MOD
GOST R 55020-2012 (ISO 14313:2007, NEQ), TC 259
GSO ISO 14313:2008(to be updated to include Cor1) GSO ISO 13847:2008
ISO 14723:2009
ed. 2
Petroleum and natural gas industries -- Pipeline transportation systems -- Subsea pipeline valves
TC 67
SC 2
WG 9
ST RK ISO 14723:2006 (ISO 14723:2001, IDT)
API Spec 6DSS 2nd ed.:2009 (MOD)
EN ISO 14723:2009
ISO 14723 : 2001 (not latest revision)
GSO ISO 14723:2010
ISO 10414-1:2008
ed. 2
CD Cor 1:2009 ISO 14723:2001 ISO 10414-1:2001
Petroleum and natural gas industries -- Field testing of drilling fluids -- Part 1: Water-based fluids
TC 67
SC 3
WG 1
ST RK ISO 10414-1:2012 (ISO 10414-1:2008, IDT)
API RP 13B-1 4th ed.:2009 (MOD)
EN ISO 10414-1:2008
ISO 10414-1:2008 IDT
GSO ISO 10414-1:2009
ISO 10414-2:2011
ed. 2
NP Amd 1:2011 NP Cor 1:2011 ISO 10414-2:2002
Petroleum and natural gas industries -- Field testing of drilling fluids -- Part 2: Oil-based fluids
TC 67
SC 3
WG 1
ST RK ISO 10414-2:2012 (ISO 10414-2:2011, IDT)
API RP 13B– 2 5th ed. 2014 (MOD)
EN ISO 10414-2:2011
ISO 10414-2:2011 MOD
GSO ISO 10414-2:2009
ISO 10416:2008
ed. 2
ISO 10416:2002
Petroleum and natural gas industries -- Drilling fluids -- Laboratory TC 67 testing
SC 3
WG 1
ST RK ISO 10416:2012 (ISO 10416:2008, IDT)
API RP 13I 8th ed. / ISO 10416:2009 (IDT)
EN ISO 10416:2009
ISO 10416:2008 MOD
GSO ISO 1O416 : 2009
ISO 13501:2011
ed. 2
ISO 13501:2005
Petroleum and natural gas industries -- Drilling fluids -- Processing TC 67 equipment evaluation
SC 3
WG 1
ST RK ISO 13501:2011 (ISO 13501:2005, IDT)
API RP 13C 5th edition:2014 (MOD)
EN ISO 13501:2011
ISO 10426-1:2009
ed. 3
Cor 1:2010; Cor ISO 10426-1:2000; IS Petroleum and natural gas industries -- Cements and materials for TC 67 well cementing -- Part 1: Specification
SC 3
WG 2
ST RK ISO 10426-1:2011 (ISO 10426-1:2009, IDT)
API Spec 10A 24th edition (IDT)
EN ISO 10426-1:2009
ISO 10426-2:2003
ed. 1
Cor 1:2006
Petroleum and natural gas industries -- Cements and materials for TC 67 well cementing -- Part 2: Testing of well cements
SC 3
WG 2
ST RK ISO 10426-2:2012 (ISO 10426-2:2003, IDT)
API RP 10B-2nd ed.:2013 (MOD)
EN ISO 10426-2:2003 + AC:2007
ISO 10426-4:2004
ed. 1
Petroleum and natural gas industries -- Cements and materials for TC 67 well cementing -- Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure
SC 3
WG 2
ST RK ISO 10426-4:2011 (ISO 10426-4:2004, IDT)
API RP 10B-4 2nd ed. :2015 (MOD)
EN ISO 10426-4:2004
ISO 10426-6:2008
ed. 1
Petroleum and natural gas industries -- Cements and materials for TC 67 well cementing -- Part 6: Methods for determining the static gel strength of cement formulations
SC 3
WG 2
ST RK ISO 10426-6:2011 (ISO 10426-6:2008, IDT)
API RP 10B-6 1st ed. EN ISO 10426-6:2008 Pending Publication ISO 10426-6:2008 (IDT)
ISO 10427-1:2001
ed. 2
ISO 10427:1993
Petroleum and natural gas industries -- Equipment for well cementing -- Part 1: Casing bow-spring centralizers
TC 67
SC 3
WG 2
ST RK ISO 10427-1:2004 (ISO 10427-1:2001, IDT)
API Spec 10D 6th ed. EN ISO 10427-1:2001 ISO 10427-1:2001 (IDT)
ISO 10427-1:2001 IDT
ISO 10427-2:2004
ed. 2
ISO 10427:1993
Petroleum and natural gas industries -- Equipment for well TC 67 cementing -- Part 2: Centralizer placement and stop-collar testing
SC 3
WG 2
ST RK ISO 10427-2:2011 (ISO 10427-2:2004, IDT)
API RP 10D-2 1st ed. / EN ISO 10427-2:2004 ISO 10427-2:2004 (IDT)
ISO 10427-2:2004 IDT
ISO 10427-3:2003
ed. 2
ISO 18165:2001
Petroleum and natural gas industries -- Equipment for well cementing -- Part 3: Performance testing of cementing float equipment
TC 67
SC 3
WG 2
ST RK ISO 10427-3:2004 (ISO 10427-3:2003, IDT)
API RP 10F 3rd ed. / EN ISO 10427-3:2004 ISO 10427-3: 2003 (IDT)
ISO 10427-3:2003 IDT
ISO 18165:2001
WITHDRAWN
ISO 10427-3:2003
Petroleum and natural gas industries -- Performance testing of ce TC 67
SC 3
WG 2
ISO 10426-5:2004
ed. 1
Petroleum and natural gas industries -- Cements and materials for TC 67 well cementing -- Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure
SC 3
WG 3
ST RK ISO 10426-5:2011 (ISO 10426-5:2004, IDT)
API RP 10B-5 1st ed. / EN ISO 10426-5:2005 ISO 10426-5:2004 (IDT)
ISO 13503-1:2011
ed. 2
Petroleum and natural gas industries -- Completion fluids and materials -- Part 1: Measurement of viscous properties of completion fluids
TC 67
SC 3
WG 3
ST RK ISO 13503-1:2009 (ISO 13503-1:2003, IDT)
API RP 13M 1st edition / EN ISO 13503-1:2011 ISO 13503-1:2003 (IDT)
ISO 13503-2:2006
ed. 1
Petroleum and natural gas industries -- Completion fluids and materials -- Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
TC 67
SC 3
WG 3
ABNT NBR ISO 13503- ST RK ISO 13503-2:2009 (ISO 2:2011 13503-2:2006)
ISO 13503-3:2005
ed. 1
Petroleum and natural gas industries -- Completion fluids and materials -- Part 3: Testing of heavy brines
TC 67
SC 3
WG 3
ST RK ISO 13503-3:2009 (ISO 13503-3:2005, IDT)
API RP 13J 5th edition:2014 (MOD)
ISO 13503-4:2006
ed. 1
Petroleum and natural gas industries -- Completion fluids and materials -- Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions
TC 67
SC 3
WG 3
ST RK ISO 13503-4:2009 (ISO 13503-4:2006, IDT)
API RP 13M-4 1st ed./ EN ISO 13503-4:2006 ISO 13503-4:2006 (IDT)
GSO ISO 13503-4:2008
ISO 13503-5:2006
ed. 1
Petroleum and natural gas industries -- Completion fluids and materials -- Part 5: Procedures for measuring the long-term conductivity of proppants
TC 67
SC 3
WG 3
ST RK ISO 13503-5:2009 (ISO 13503-5:2006, IDT)
API RP 19D 1st edition / EN ISO 13503-5:2006 ISO 13503-5:2006 (IDT)
GSO ISO 13503-5:2008
ISO 13503-6:2014
ed. 1
Petroleum and natural gas industries -- Completion fluids and TC 67 materials -- Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions
SC 3
WG 3
ISO 10407:1993
ed. 1
ISO 10407-2:2008
ed. 1
ISO 10424-1:2004 ISO 10424-2:2007
Amd 1:2005
ISO 13503-1:2003
Amd 1:2009
Petroleum and natural gas industries -- Drilling and production equipment -- Drill stem design and operating limits
API RP 19C 1st edition / EN ISO 13503-2:2006 + ISO 13503-2:2006 (IDT) A1:2009
SC 4
WG 1
ST RK ISO 10407:2004 (ISO 10407:1993 IDT)
API RP 7G : 1998 (MOD) [not adopted] +erratum 2000 + add. 2003 +add. 2009
SC 4
WG 1
ST RK ISO 10407-2:2012 (ISO 10407-2:2008, IDT)
API RP 7G-2 1st ed. (IDT) + errata 2009
ed. 1
Petroleum and natural gas industries -- Rotary drilling equipment - TC 67 - Part 1: Rotary drill stem elements
SC 4
WG 1
ST RK ISO 10424-1: 2006 (ISO 10424-1: 2004 IDT)
API Spec 7-1 1st ed. / EN ISO 10424-1:2004 ISO 10424-1:2004 (IDT)
ed. 1
Petroleum and natural gas industries -- Rotary drilling equipment - TC 67 - Part 2: Threading and gauging of rotary shouldered thread connections
SC 4
WG 1
ISO 13534:2000
ed. 1
Petroleum and natural gas industries -- Drilling and production equipment -- Inspection, maintenance, repair and remanufacture of hoisting equipment
TC 67
SC 4
WG 1
ISO 13535:2000
ed. 1
Petroleum and natural gas industries -- Drilling and production equipment -- Hoisting equipment
TC 67
SC 4
WG 1
ISO 13626:2003
ed. 1
Petroleum and natural gas industries -- Drilling and production equipment -- Drilling and well-servicing structures
TC 67
SC 4
WG 1
ST RK ISO 13626:2006 (ISO 13626:2003, IDT)
ISO 14693:2003
ed. 1
Petroleum and natural gas industries -- Drilling and well-servicing TC 67 equipment
SC 4
WG 1
ST RK ISO 14693:2006 (ISO 14693:2003, IDT)
API Spec 7K 6th ed. :2015
ISO 13354:2014
ed. 1
ISO 13533:2001
ed. 1
API Spec16A 3rd edition EN ISO 13533:2001 + / ISO 13533:2001 (MOD) AC:2006 + ERR 2005
ISO 13624-1:2009
ISO 13625:2002
GB/T 29169-2012 MOD
GOST 33006.2-2014 (ISO 10407-2:2008, MOD) TC 023
API Spec 7-2 1st ed. EN ISO 10424-2:2007 ISO 10424-2:2007 (IDT)
GB/T 22512.2-2008 MOD
GOST R 563492014(ISO 104242:2007, MOD), TC 357
ST RK ISO 13534:2004 (ISO 13534:2000, IDT)
API RP 8B 8th edition: 2014 (MOD)
EN ISO 13534:2000
ISO 13534:2000 MOD
GOST R ISO 135342013 (ISO 13534:2000, IDT),TC23
ST RK 1263-2004 (ISO 13535:2000, NEQ); ST RK ISO 13535:2010 (ISO 13535:2000, IDT)
API Spec 8C 5th edition:2012 (MOD)
EN ISO 13535:2000
GB/T 19190-2003 ISO 13535:2000 IDT
GOST R 53683-2009 (ISO 13535:2000, MOD), TC 23
EN ISO 13626:2004
ISO 13626:2003 MOD
GOST R ISO 13626 2013 (ISO 13626:2003, IDT),TC23
EN ISO 14693:2003
ISO 14693:2003 MOD
GOST 31841-2012 (ISO 14693:2003, IDT), TC 023
ISO 13533:2001 MOD
GOST R ISO 13533GSO ISO 13533 : 2010 2013 (ISO 13533:2001, IDT), TC23
Petroleum and natural gas industries -- Drilling and production equipment -- Shallow gas diverter equipment
TC 67
SC 4
WG 2
Petroleum and natural gas industries -- Drilling and production equipment -- Drill-through equipment
TC 67
SC 4
WG 2
ST RK ISO 13533:2004 (ISO 13533:2001, IDT)
ed. 1
Petroleum and natural gas industries -- Drilling and production equipment -- Part 1: Design and operation of marine drilling riser equipment
TC 67
SC 4
WG 2
ST RK ISO 13624-1:2012 (ISO 13624-1:2009, IDT)
ed. 1
Petroleum and natural gas industries -- Drilling and production equipment -- Marine drilling riser couplings
TC 67
SC 4
WG 2
ST RK ISO 13625:2009 (ISO 13625:2002, IDT)
ISO/TR 13624-2:200 ed. 1
Petroleum and natural gas industries -- Drilling and production equipment -- Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report
TC 67
SC 4
WG 2
Cor 1:2005
GSO ISO 13503-2:2008 (to include Amend 1)
EN ISO 13503-6:2014
TC 67
ISO 10407:1993
ISO 13503-2:2006 MOD
EN ISO 13503-3:2005 + AC:2007
Petroleum and natural gas industries -- Rotary drilling equipment - TC 67 - Part 2: Inspection and classification of used drill stem elements
Cor 1:2009
ISO 10426-1:2009 MOD
EN ISO 10407-2:2008 + AC:2009
GSO ISO 10407-2 : 2010
EN ISO 13354:2014
API Spec 16R (1997) (IDT)
EN ISO 13624-1:2009
ISO 13624-1:2009 MOD
EN ISO 13625:2002
ISO 13625:2002 MOD
GOST R 33005-2014 (ISO 13625:2002, MOD), TC 023
ISO 10423:2009 MOD
GOST R 51365-2009 (ISO 10423:2003, MOD)-Rus. TC 023
ISO 10417:2004 IDT
GOST ISO 10417-2014 GSO ISO 10417:2009 (ISO 10417;2004, IDT), TC 023
CEN ISO/TR 136242:2013
ISO 10423:2009
ed. 4
ISO 10423:1994; ISO 10423:2001; ISO 10423:2003
Petroleum and natural gas industries -- Drilling and production equipment -- Wellhead and christmas tree equipment
TC 67
SC 4
WG 3
ST RK ISO 10423:2004 (ISO 10423:2003, IDT); GOST ISO 10423:2012 (ISO 10423:2009, IDT)
API Spec 6A 20th ed. (IDT)
EN ISO 10423:2009
ISO 10417:2004
ed. 2
ISO 10417:1993
Petroleum and natural gas industries -- Subsurface safety valve systems -- Design, installation, operation and redress
TC 67
SC 4
WG 4
ST RK ISO 10417:2007 (ISO 10417:2004, IDT)
API RP 14B 6th ed.:2015 EN ISO 10417:2004 (MOD)
ISO 10428:1993
ed. 1
Petroleum and natural gas industries -- Sucker rods (pony rods, polished rods, couplings and sub-couplings) -- Specification
TC 67
SC 4
WG 4
ST RK 1259:2004 (ISO 10428:1993, NEQ); ST RK ISO 10428:2011 (ISO 10428:1993, IDT); GOST 13877-96 (ISO 10428:1993, IDT)
No more adopted
ISO 10431:1993
ed. 1
Petroleum and natural gas industries -- Pumping units -Specification
TC 67
SC 4
WG 4
ST RK 1260:2004. (ISO 10431:1993, NEQ)
ISO 10432:2004
ed. 3
ISO 10432:1993; ISO 10432:1999
Petroleum and natural gas industries -- Downhole equipment -Subsurface safety valve equipment
TC 67
SC 4
WG 4
ST RK ISO 10432:2011 (ISO 10432:2004, IDT)
API Spec 14A 12th ed. : 2015 (MOD)
EN ISO 10432:2004
ISO 10432:2004 MOD
GOST ISO 10432-2014 (ISO 10432:2004, IDT), TC 023
ISO 14310:2008
ed. 2
ISO 14310:2001
Petroleum and natural gas industries -- Downhole equipment -Packers and bridge plugs
TC 67
SC 4
WG 4
ST RK ISO 14310:2011 (ISO 14310:2008, IDT); ST RK 1253:2004 (ISO 14310:2001, MOD)
API Spec 11D1 3rd ed.:2015 (IDT)
EN ISO 14310:2008
ISO 14310:2008 MOD
GOST ISO 14310-2014 GSO ISO 14310 : 2009 (ISO 14310:2008, IDT), TC 023
prEN ISO 10428 [status: abandoned]
prEN ISO 10431 [status: abandoned]
ISO 14998:2013
ed. 1
ISO 15136-1:2009
ed. 2
Petroleum and natural gas industries -- Downhole equipment -Completion accessories
TC 67
SC 4
WG 4
Petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 1: Pumps
TC 67
SC 4
WG 4
ST RK ISO 15136-1:2012 (ISO 15136-1:2009, IDT)
API Spec 11D2 1st editio EN ISO 15136-1:2009
ISO 15136-2:2006
ISO 15136-1:2009 MOD
ed. 1
Petroleum and natural gas industries -- Progressing cavity pump systems for artificial lift -- Part 2: Surface-drive systems
TC 67
SC 4
WG 4
ST RK ISO 15136-2:2010 (ISO 15136-2:2006, IDT)
API Std 11D3 1st ed./ EN ISO 15136-2:2006 ISO 15136-2:2006 (IDT)
ISO 15136-2:2006 MOD
ISO 15551-1:2015
ed. 1
Petroleum and natural gas industries -- Drilling and production equipment -- Part 1: Electric submersible pump systems for artificial lift
TC 67
SC 4
WG 4
ISO 16070:2005
ed. 2
Petroleum and natural gas industries -- Downhole equipment -Lock mandrels and landing nipples
TC 67
SC 4
WG 4
ST RK ISO 16070:2011 (ISO 16070:2005, IDT)
API Spec 14L 2nd ed. / ISO 16070:2005 (IDT)
EN ISO 16070:2005
ISO 16070:2005 MOD
ISO 17078-1:2004
ed. 1
Amd 1:2010
Petroleum and natural gas industries -- Drilling and production equipment -- Part 1: Side-pocket mandrels
TC 67
SC 4
WG 4
ST RK ISO 17078-1:2010 (ISO 17078-1:2004, IDT)
API Spec 19G1 1st edition (IDT)
EN ISO 17078-1:2004 + A1:2010
ISO 17078-1:2004 MOD
ISO 17078-2:2007
ed. 1
Amd 1: 2007
Petroleum and natural gas industries -- Drilling and production equipment -- Part 2: Flow-control devices for side-pocket mandrels
TC 67
SC 4
WG 4
ST RK ISO 17078-2:2010 (ISO 17078-2:2007, IDT)
API Spec 19G2 1st edition (IDT)
ISO 17078-3:2009
ed. 1
Petroleum and natural gas industries -- Drilling and production equipment -- Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
TC 67
SC 4
WG 4
ST RK ISO 17078-3:2010 (ISO 17078-3:2009, IDT)
ISO 17078-4:2010
ed. 1
Petroleum and natural gas industries -- Drilling and production equipment -- Part 4: Practices for side-pocket mandrels and related equipment
TC 67
SC 4
WG 4
ST RK ISO 17078-4:2012 (ISO 17078-4:2010, IDT)
ISO 17824:2009
ed. 1
Petroleum and natural gas industries -- Downhole equipment -Sand screens
TC 67
SC 4
WG 4
ST RK ISO 17824:2011 (ISO 17824:2009, IDT)
EN ISO 17824:2014
ISO 28781:2010
ed. 1
Petroleum and natural gas industries -- Drilling and production equipment --Subsurface barrier valves and related equipment
TC 67
SC 4
WG 4
ST RK ISO 28781:2011 (ISO 28781:2010, IDT)
EN ISO 28781:2010
ISO/TS 16530-2:2014 ed. 1
Well integrity -- Part 2: Well integrity for the operational phase
TC 67
SC 4
WG 4
ISO 10420:1994
Petroleum and natural gas industries -- Flexible pipe systems for subsea and marine riser applications
TC 67
SC 4
WG 6
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 1: General requirements and recommendations
TC 67
SC 4
WG 6
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 10: Specification for bonded flexible pipe
TC 67
SC 4
WG 6
API Spec 17K edition (IDT)
2nd
EN ISO 13628-10:2006
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 11: Flexible pipe systems for subsea and marine applications
TC 67
SC 4
WG 6
API RP 17B 5th edition:2014 (MOD)
EN ISO 13628-11:2008 + AC:2009
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 15: Subsea structures and manifolds
TC 67
SC 4
WG 6
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 2: Unbonded flexible pipe systems for subsea and marine applications
TC 67
SC 4
WG 6
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 3: Through flowline (TFL) systems
TC 67
SC 4
WG 6
ISO 15136-1:2001
ISO 16070:2001
Cor 1:2009
WITHDRAWN
ISO 13628-1:2005
ed. 2
ISO 13628-10:2005
ed. 1
Amd 1:2010
ISO 13628-1:1999
ISO 13628-11:2007
ed. 1
ISO 13628-15:2011
ed. 1
ISO 13628-2:2006
ed. 2
ISO 13628-3:2000
ed. 1
ISO 13628-4:2010
ed. 2
ISO 13628-4:1999
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 4: Subsea wellhead and tree equipment
TC 67
SC 4
WG 6
ISO 13628-5:2009
ed. 2
ISO 13628-5:2002
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 5: Subsea umbilicals
TC 67
SC 4
WG 6
ISO 13628-6:2006
ed. 2
ISO 13628-6:2000
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 6: Subsea production control systems
TC 67
SC 4
ISO 13628-7:2005
ed. 1
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 7: Completion/workover riser systems
ISO 13628-8:2002
ed. 1
Cor 1:2008
Cor 1:2009
Cor 1: 2011
ISO 10420:1994
ISO 13628-2:2000
Cor 1:2005
EN ISO 14998:2013
EN ISO 15551-1:2015
GOST ISO 17078-12014 (ISO 170781:2004, IDT), TC023
GSO ISO 17078-1 : 2010
EN ISO 17078-2:2007 + AC:2009
GOST ISO 17078-22014 (ISO 170782:2007, IDT), TC023
GSO ISO 17078-2 : 2010
API Spec 19G3 1st edition (IDT)
EN ISO 17078-3:2009
GOST ISO 17078-32013 (ISO 170783:2009, IDT), TC023
GSO ISO 17078-3 : 2010
API Spec 19G4 1st edition (IDT)
EN ISO 17078-4:2010
GOST 35504-2013 (ISO 17824:2009, MOD), TC23
GSO ISO 17824 : 2010
ISO 17824:2009 MOD
GOST 32503-2013 (ISO 28781:2010, MOD), TC023
CEN ISO/TS 165302:2015 [status: to be published soon]
ST RK ISO 13628-1:2009 (ISO 13628-1:2005, IDT)
API RP 17A 4th edition / EN ISO 13628-1:2005 + ISO 13628-1:2005 (IDT) A1:2010
ISO 13628-1:2005 IDT
ISO 13628-11:2007
EN ISO 13628-15:2011
ST RK ISO 13628-2:2009 (ISO 13628-2:2006, IDT)
API Spec 17J 4th ed. :2014 (MOD)
ISO 13628-2:2006 IDT
GOST R ISO 13628-2- GSO ISO 13628-2:2009 2013 (ISO 136282:2006, IDT), TC 023
API RP 17C 2nd edition EN ISO 13628-3:2000 (IDT)
EN ISO 13628-2:2006 + AC:2009
ISO 13628-3:2000 IDT
GOST R ISO 13628-3- GSO ISO 13628-3:2009 2013 (ISO 136283:2000, IDT),TC 023
API Spec 17D 2nd edition (IDT)
ISO 13628-4:2010 MOD
GSO ISO 13628-4:2009
API Spec 17E 4th edition EN ISO 13628-5:2009 (IDT)
ISO 13628-5:2009 IDT
GSO ISO 13628-5:2009
WG 6
API STD 17F, 3rd ed. : 2014 (MOD)
ISO 13628-6:2006 IDT
ST RK ISO 13628-5:2009 (ISO 13628-5:2002, IDT)
EN ISO 13628-4:2010 + AC:2011
EN ISO 13628-6:2006
TC 67
SC 4
WG 6
API RP 17G 2nd ed. / EN ISO 13628-7:2006 ISO 13628-7:2005 (IDT)
ISO 13628-7:2005
Petroleum and natural gas industries -- Design and operation of TC 67 subsea production systems -- Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
SC 4
WG 6
API RP 17H 2nd ed.:2013 (MOD)
EN ISO 13628-8:2006
ISO 13628-8:2002 IDT
Became part of API RP 17H; withdrawel of API RP 17M 1st ed.
EN ISO 13628-9:2006
ISO 13628-9:2000 IDT
EN ISO 10405:2006
GB/T 17745-2011 IDT
ISO 13628-9:2000
ed. 1
Petroleum and natural gas industries -- Design and operation of subsea production systems -- Part 9: Remotely Operated Tool (ROT) intervention systems
TC 67
SC 4
WG 6
ISO 10405:2000
ed. 2
ISO 10405:1993
Petroleum and natural gas industries -- Care and use of casing and tubing
TC 67
SC 5
WG 1
ST RK 1256-2004 (ISO 10405:2000, NEQ); ST RK ISO 10405:2011 (ISO 10405:2000, IDT); GOST ISO 10405-2012 (ISO 10405:2000, IDT)
ISO 11960:2014
ed. 5
ISO 2645:1975; ISO 11960:1996; ISO 11960:2001; ISO 11960:2004; ISO 11960:2011
Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells
TC 67
SC 5
WG 1
GOST 31446-2012, (ISO 11960:2004, MOD); ST RK ISO 11960:2009 (ISO 11960:2004, IDT)
API Spec 5CT 9th ed.:2011 (MOD)
EN ISO 11960:2014
GB/T 19830 IDT Under Revision
ISO 11961:2008
ed. 2
Cor 1:2009
ISO 11961:1996
Petroleum and natural gas industries -- Steel drill pipe
TC 67
SC 5
WG 1
ST RK ISO 11961:2009 (ISO 11961:2008, IDT)
API Spec 5DP 1st ed./ ISO 11961:2008 (IDT)
EN ISO 11961:2008 + AC:2009
GB/T 29166-2012 MOD
ISO 15463:2003
ed. 1
Cor 1:2009
Petroleum and natural gas industries -- Field inspection of new casing, tubing and plain-end drill pipe
TC 67
SC 5
WG 1
ST RK ISO 15463:2006 (ISO 15463:2003, IDT)
API RP 5A5 7th edition/I EN ISO 15463:2003 + AC:2009
GB/T 20656-2006 IDT
ISO 13679:2002
ed. 1
Petroleum and natural gas industries -- Procedures for testing casing and tubing connections
TC 67
SC 5
WG 2
ST RK 1262:2004 (ISO 13679:2002, NEQ)
API RP 5C5 3rd edition / EN ISO 13679:2006 ISO 13679:2002 (IDT)
GB/T 21267-2007 IDT
Qualification of casing connections for thermal wells
TC 67
SC 5
WG 2
Petroleum and natural gas industries -- Equations and calculations TC 67 for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing
SC 5
WG 2
ST RK ISO/TS 10400-2012 (ISO/TR 10400:2007, IDT)
ISO/PAS 12835:2013 ed. 1
[Not adopted]
GB/T MOD Under Revision
API TR 5C3, 7th ed./ ISO 10400:2008(IDT)
CEN ISO/TR 10400:2011
GB/T 20657-2011 IDT
ISO/TR 10400:2007
ed. 1
ISO 10400:1993
ISO 13680:2010
ed. 3
ISO 13680:2000; ISO 13680:2008
Petroleum and natural gas industries -- Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock -Technical delivery conditions
TC 67
SC 5
WG 3
ST RK ISO 13680:2012 (ISO 13680:2010, IDT)
API Spec 5CRA 1st edition (MOD)
EN ISO 13680:2010
GB/T IDT Under Revision
ISO 13678:2010
ed. 3
ISO 13678:2000;
IS Petroleum and natural gas industries -- Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
TC 67
SC 5
WG 4
ST RK 1264:2004 (ISO 13678:2000, MOD); ST RK ISO 13678:2011 (ISO 13678:2010, IDT)
API RP 5A3 3rd edition:2009 (IDT)
EN ISO 13678:2012
GB/T 23512 MOD Under Revision
ISO 10418:2003
ed. 2
Cor 1:2008
ISO 10418:1993
Petroleum and natural gas industries -- Offshore production installations -- Analysis, design, installation and testing of basic surface process safety systems
TC 67
SC 6
WG 1
ST RK ISO 10416:2012 (ISO 10416:2008, IDT)
EN ISO 10418:2003 + AC:2009
ISO 10418:2003
ed. 2
Cor 1:2008
ISO 10418:1993
Petroleum and natural gas industries -- Offshore production installations -- Process safety systems
TC 67
SC 6
WG 1
ST RK 10418:2005 10418:2003 IDT)
EN ISO 10418:2003 + AC:2009
ISO 13702:2015
ed. 2
ISO 13702:1999
Petroleum and natural gas industries -- Control and mitigation of fires and explosions on offshore production installations -Requirements and guidelines
TC 67
SC 6
WG 1
ST RK ISO 13702:2006 (ISO 13702:1999, IDT)
EN ISO 13702:2015
ISO 15544:2000
ed.1
Petroleum and natural gas industries -- Offshore production installations -- Requirements and guidelines for emergency response
TC 67
SC 6
WG 1
ST RK ISO 15544:2006 (ISO 15544:2000, IDT)
EN ISO 15544:2010
Amd 1:2009
GSO ISO 13628-1 : 2010
(ISO
GSO ISO 13628-8:2009
GOST R 56175-2014 (ISO 10405:2000, MOD),TC 357
GOST 32696-2014 (ISO 11961:2008, MOD), TC 357
GSO ISO 11961 : 2009
GSO ISO/TR 10400 : 2009 GSO ISO 13680 : 2010
GOST R ISO 13678GSO ISO 13678 : 2010 2015 (ISO 13678-2010, IDT), TC 357 GSO ISO 10418 : 2010
GSO ISO 10418 : 2010 GB/T 20660-2006 ISO 13702:1999 IDT
GSO ISO 13702 : 2010
ISO 17776:2000
ed. 1
Petroleum and natural gas industries -- Offshore production installations -- Major Accident hazard management during the design of new installations
TC 67
SC 6
WG 1
ST RK ISO 17776:2004 (ISO 17776:2000, IDT)
EN ISO 17776:2002
ISO 15138:2007
ed. 2
ISO/TS 27469:2010
ed. 1
Petroleum and natural gas industries -- Offshore production installations -- Heating, ventilation and air-conditioning
TC 67
SC 6
WG 11
ST RK ISO 15138:2006 (ISO 15138:2000, IDT)
EN ISO 15138:2007
Petroleum, petrochemical and natural gas industries - Method of test for fire dampers
TC 67
SC 6
WG 11
ISO 23251:2006
WITHDRAWN
ISO 28300:2008
ed. 1
Cor 1:2007
Petroleum, petrochemical and natural gas industries -- Pressurerelieving and depressuring systems
TC 67
SC 6
WG 12
ST RK ISO 23251:2010 (ISO 23251:2006, IDT)
API Std 521 6th edition:2014 (MOD)
EN ISO 23251:2007 [status: withdrawn]
GSO ISO 23251 : 2008
Cor 1:2009
Petroleum, petrochemical and natural gas industries -- Venting of TC 67 atmospheric and low-pressure storage tanks
SC 6
WG 12
ST RK ISO 28300:2010 (ISO 28300:2008, IDT)
API Std 2000, 7th ed.:2014 (MOD)
EN ISO 28300:2008 + AC:2009
ISO 10438-1:2007
ed. 2
GSO ISO 28300 : 2008 + Corr 1 : 2010
ISO 10438-1:2003
Petroleum, petrochemical and natural gas industries -TC 67 Lubrication, shaft-sealing and control-oil systems and auxiliaries -Part 1: General requirements
SC 6
WG 2
API Std 614 5th edition / EN ISO 10438-1:2007 ISO 10438-1, 2, 3, 4 (IDT)
ISO 10438-2:2007
ISO 10438-3:2007
ed. 2
ISO 10438-2:2003
Petroleum, petrochemical and natural gas industries -TC 67 Lubrication, shaft-sealing and control-oil systems and auxiliaries -Part 2: Special-purpose oil systems
SC 6
WG 2
API Std 614 5th edition / EN ISO 10438-2:2007 ISO 10438-1, 2, 3, 4 (IDT)
ed. 2
ISO 10438-3:2003
Petroleum, petrochemical and natural gas industries -TC 67 Lubrication, shaft-sealing and control-oil systems and auxiliaries -Part 3: General-purpose oil systems
SC 6
WG 2
API Std 614 5th edition / EN ISO 10438-3:2007 ISO 10438-1, 2, 3, 4 (IDT)
ISO 10438-4:2007
ed. 2
ISO 10438-4:2003
Petroleum, petrochemical and natural gas industries -TC 67 Lubrication, shaft-sealing and control-oil systems and auxiliaries -Part 4: Self-acting gas seal support systems
SC 6
WG 2
API Std 614 5th edition / EN ISO 10438-4:2007 ISO 10438-1, 2, 3, 4 (MOD)
ISO 10437:2003
ed. 2
ISO 13703:2000
ed. 1
ISO 14692-1:2002
ed. 1
ISO 14692-2:2002
ISO 15138:2000
Amd 1:2008
ISO 10437:1993
GOST R ISO 177762012 (ISO 17776:20000, IDT), TC 023 ISO 15138:2007
GSO ISO 15138 : 2010
CEN ISO/TS 27469:2011
Petroleum, petrochemical and natural gas industries -- Steam turbines -- Special-purpose applications
TC 67
SC 6
WG 3
ST RK ISO 10437:2012 (ISO 10437:2003, IDT)
Cor 1:2002
Petroleum and natural gas industries -- Design and installation of piping systems on offshore production platforms
TC 67
SC 6
WG 5
ST RK ISO 13703:2006 (ISO 13703:2000, IDT)
EN ISO 13703:2000 + AC:2007
ISO 13703:2000 IDT
GSO ISO 13703 : 2010
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials
TC 67
SC 6
WG 5
ST RK 1255-1:2004 (ISO 146921:2002, MOD)
EN ISO 14692-1:2002
GB/T 29165.1-2012 IDT
GSO ISO 14692-1:2008
ed. 1
Cor 1:2005
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture
TC 67
SC 6
WG 5
ST RK 1255-2:2004 (ISO 146922:2002, MOD)
EN ISO 14692-2:2002 + AC:2006
GB/T 29165.2-2012 IDT
GSO ISO 14692-2:2008
ISO 14692-3:2002
ed. 1
Cor 1:2005
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design
TC 67
SC 6
WG 5
ST RK 1255-3:2004 (ISO 146923:2002, MOD)
EN ISO 14692-3:2002 + AC:2006
GB/T IDT Under Revision
GSO ISO 14692-3:2008
ISO 14692-4:2002
ed. 1
Cor 1:2006
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation
TC 67
SC 6
WG 5
ST RK 1255-4:2004 (ISO 146924:2002, MOD)
EN ISO 14692-4:2002 + AC:2007
GB/T IDT Under Revision
GSO ISO 14692-4:2008
ISO 15649:2001
ed. 1
Petroleum and natural gas industries -- Piping
TC 67
SC 6
WG 5
CEN/TR 14549:2004 [Guide to use ISO 15649:2001 in EU context]
GB/T 20801.1~6-2006 ISO 15649:2001 NEQ
ISO 24817:2015
ed. 1
Petroleum, petrochemical and natural gas industries -- Composite TC 67 repairs for pipework -- Qualification and design, installation, testing and inspection
SC 6
WG 5
ISO 27509:2012
ed. 1
Petroleum and natural gas industries -- Compact flanged connections with IX seal ring
TC 67
SC 6
WG 5
EN ISO 27509:2012 + AC:2013
ISO 12211:2012
ed. 1
Petroleum, petrochemical and natural gas industries -- Spiral plate TC 67 heat exchangers
SC 6
WG 8
EN ISO 12211:2012
ISO 12212:2012
ed. 1
Petroleum, petrochemical and natural gas industries -- Hairpintype heat exchangers
TC 67
SC 6
WG 8
ISO 13704:2007
ed. 2
ISO 13704:2001
Petroleum, petrochemical and natural gas industries -- Calculation TC 67 of heater-tube thickness in petroleum refineries
SC 6
WG 8
ISO 13705:2012
ed. 3
ISO 13705:2001; ISO 13705:2006
Petroleum, petrochemical and natural gas industries -- Fired heaters for general refinery service
TC 67
SC 6
WG 8
ISO 13706:2011
ed. 3
ISO 13706:2000; ISO 13706:2005
Petroleum, petrochemical and natural gas industries -- Air-cooled TC 67 heat exchangers
SC 6
WG 8
ISO 15547-1:2005
ed. 1
ISO 15547:2000
Petroleum, petrochemical and natural gas industries -- Plate-type TC 67 heat exchangers -- Part 1: Plate-and-frame heat exchangers
SC 6
WG 8
ISO 15547-2:2005
ed. 1
ISO 15547:2000
Petroleum, petrochemical and natural gas industries -- Plate-type TC 67 heat exchangers -- Part 2: Brazed aluminium plate-fin heat exchangers
SC 6
WG 8
ISO 16812:2007
ed. 2
ISO 16812:2002
Petroleum, petrochemical and natural gas industries -- Shell-and- TC 67 tube heat exchangers
SC 6
WG 8
ST RK ISO 16812:2004 (ISO 16812:2002, IDT)
API Std 660 9th ed.:2015 EN ISO 16812:2007 (MOD)
ISO 25457:2008
ed. 1
Petroleum, petrochemical and natural gas industries -- Flare details for general refinery and petrochemical service
TC 67
SC 6
WG 8
ST RK ISO 25457:2011 (ISO 25457:2008, IDT)
API Std 537 2nd ed./ ISO EN ISO 25457:2008 25457:2008 (IDT)
GSO ISO 25457 : 2009
ISO 10441:2007
ed. 2
ISO 10441:1999
Petroleum, petrochemical and natural gas industries -- Flexible couplings for mechanical power transmission -- Special-purpose applications
TC 67
SC 6
WG 9
ST RK ISO 10441:2012 (ISO 10441:2007, IDT)
API Std 671 4th edition / EN ISO 10441:2007 ISO 10441:2007 (IDT)
GSO ISO 10441:2008
ISO 14691:2008
ed. 2
ISO 14691:1999
Petroleum, petrochemical and natural gas industries -- Flexible couplings for mechanical power transmission -- General-purpose applications
TC 67
SC 6
WG 9
ST RK ISO 14691:2012 (ISO 14691:2008, IDT)
(National Adoption under EN ISO 14691:2008 committee consider.)
ISO 19900:2013
ed. 2
ISO 19900:2002; ISO Petroleum and natural gas industries -- General requirements for 13819-1:1995 offshore structures
TC 67
SC 7
WG 1
ABNT NBR ISO 19900 : ST RK ISO 19900:2006 (ISO 2004 19900:2002, IDT)
EN ISO 19900:2002
CAN/CSA ISO 19900:14 ISO 19900:2013 IDT
ISO 19901-4:2016
ed. 2
ISO 19901-4:2003
Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 4: Geotechnical and foundation design considerations
TC 67
SC 7
WG 10
EN ISO 19901-4:2003
CAN/CSA ISO 199014:06
ISO 19901-8:2014
ed. 1
Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 8: Marine soil Investigations
TC 67
SC 7
WG 10
EN ISO 19901-8:2015
CAN/CSA ISO 199018:15
ISO 19901-1:2015
ed. 2
Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 1: Metocean design and operating considerations
TC 67
SC 7
WG 3
IN 2010 PLAN
EN ISO 19901-1:2005
CAN/CSA ISO 199011:06
ISO 19901-2:2004
ed. 1
Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 2: Seismic design procedures and criteria
TC 67
SC 7
WG 3
ST RK 1967:2010 (ISO 199011:2005, MOD)
EN ISO 19901-2:2004
CAN/CSA Z19901-2:07
ISO 19901-3:2014
ed. 2
ISO 19901-3:2010
Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 3: Topsides structure
TC 67
SC 7
WG 3
ST RK ISO 19901-2:2006 (ISO 19901-2:2004, IDT)
EN ISO 19901-3:2010
CAN/CSA ISO 199013:15
ISO 19902:2007
ed. 1
ISO 13819-2:1995
Petroleum and natural gas industries -- Fixed steel offshore structures
TC 67
SC 7
WG 3
EN ISO 19902:2007
CAN/CSA Z19902:09
ISO 19903:2006
ed. 1
Petroleum and natural gas industries -- Fixed concrete offshore structures
TC 67
SC 7
WG 4
EN ISO 19903:2006
CAN/CSA ISO 19903:07
ISO 19901-7:2013
ed. 2
Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units
TC 67
SC 7
WG 5
EN ISO 19901-7:2013
CAN/CSA ISO 199017:14
ISO 19904-1:2006
ed. 1
Petroleum and natural gas industries -- Floating offshore structures -- Part 1: Monohulls, semi-submersibles and spars
TC 67
SC 7
WG 5
EN ISO 19904-1:2006
CAN/CSA ISO 199041:07
ISO 19904-1:2006
ISO 19901-5:2016
ed. 1
ISO 19901-5:2003
Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 5: Weight control during engineering and construction
TC 67
SC 7
WG 6
EN ISO 19901-5:2003
CAN/CSA ISO 199015:05
ISO 19901-5:2003
ISO 19905-1:2016
ed. 2
ISO 19905-1:2012
Petroleum and natural gas industries -- Site-specific assessment TC 67 of mobile offshore units -- Part 1: Jack-ups
SC 7
WG 7
EN ISO 19905-1:2012
CAN/CSA Z19905-1:13
ISO/TS 24817:2006
Cor 1:2013
Cor 1:2008
ISO 19901-1:2005
ISO/TR 13637:1997; ISO 19901-7:2005
API Std 612 7th edition:2014 (MOD)
ABNT NBR ISO 15649 : ST RK ISO 15649:2011 (ISO 2004 15649:2001, IDT); ST RK 1267:2004 (ISO 15649:2001, MOD) ST RK ISO/ТУ 24817:2010 (ISO/TS 24817:2006, IDT)
EN ISO 10437:2003
GSO ISO 10437:2008
EN ISO 24817:2015
GSO ISO 24817 : 2010
EN ISO 12212:2012 ST RK ISO 13704:2011 (ISO 13704:2007, IDT)
API Std 530 7th edition:2015 (MOD)
EN ISO 13704:2007 + AC:2009
Std 560 4th edition (MOD)
EN ISO 13705:2012
ST RK ISO 13706:2009 (ISO 13706:2005, IDT); GOST ISO 13706:2011 (ISO 13706:2000, IDT)
API Std 661 7th edition:2013 (MOD)
EN ISO 13706:2011
ST RK ISO 15547:2004 (ISO 15547:2000, IDT)
API Std 662 part 1 1st EN ISO 15547-1:2005 edition / ISO 15547-1:2005 (IDT)
GSO ISO 13704:2008 GOST R 53682-2009 (ISO 13705:2005, MOD), TC 023
GSO ISO 13706:2008
GOST R ISO 15547-1- GSO ISO 15547-1 : 2009 (ISO 155472008 1:2005, IDT), TC 023 (2nd edition)
API Std 662 part 2 1st EN ISO 15547-2:2005 edition / ISO 15547-2:2005 (IDT)
ST RK ISO 19901-4:2006 (ISO 19901-4:2003, IDT)
ST RK ISO 19901-7:2006 (ISO 19901-7:2005, IDT) API RP 2FPS 2nd ed.(MOD) ABNT NBR ISO 19901- ST RK ISO 19901-5:2006 (ISO 5 : 2006 19901-5:2003, IDT)
GSO ISO 13705:2008
GSO ISO 15547-2:2008 (2nd edition) GOST R 53677-2009 (ISO 16812:2007, MOD), TC 023
GSO ISO 16812 : 2008
GSO ISO 14691:2008
GOST R 54483-2011 GSO ISO 19900:2008 (ISO 19900:2002, IDT), TC 023
GSO ISO 19902:2010
GSO ISO 19901-7 : 2010
ISO/TR 19905-2:201 ed. 2
Petroleum and natural gas industries -- Site-specific assessment TC 67 of mobile offshore units -- Part 2: Jack-ups commentary and detailed sample calculation
SC 7
WG 7
CEN ISO/TR 199052:2013
ISO 19906:2010
ed. 1
Petroleum and natural gas industries -- Arctic offshore structures
TC 67
SC 7
WG 8
EN ISO 19906:2010
CAN/CSA ISO 19906:11
ISO 19901-6:2009
ed. 1
Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 6: Marine operations
TC 67
SC 7
WG 9
EN ISO 19901-6:2009
CAN/CSA ISO 199016:10
ISO/TS 18683:2015
ed. 1
Guidelines for systems and installations for supply of LNG as fuel TC 67 to ships
SC 9
WG 1
[scope of CEN/TC 282]
ISO 28460:2010
ed. 1
Petroleum and natural gas industries -- Installation and equipment TC 67 for liquefied natural gas -- Ship-to-shore interface and port operations
SC 9
WG 2
EN ISO 28460:2010 [under CEN/TC 282]
ISO/TS 16901:2015
ed. 1
Guidance on performing risk assessment in the design of onshore TC 67 LNG installations including the ship/shore interface
SC 9
WG 2
[scope of CEN/TC 282]
ISO 16903:2015
ed. 1
Petroleum and natural gas industries -- Characteristics of LNG influencing design and material selection
TC 67
SC 9
WG 4
EN ISO 16903:2015 [under CEN/TC 282]
ISO/TR 17177:2015
ed. 1
Petroleum and natural gas industries -- Guidelines for the marine interfaces of hybrid LNG terminals
TC 67
SC 9
WG 7
[scope of CEN/TC 282]
ISO 16904:2016
ed. 1
Petroleum and natural gas industries - Design and testing of LNG TC 67 marine transfer arms for conventional onshore terminals
WG 10
EN ISO 16904:2015 [under CEN/TC 282; status: to be published soon]
ISO 16961:2015
ed. 1
Petroleum, petrochemical and natural gas industries -- Internal coating and lining of steel storage tanks
TC 67
WG 11
ISO 13879:1999
ed. 1
Petroleum and natural gas industries -- Content and drafting of a functional specification
TC 67
WG 2
ST RK ISO 13879:2004 (ISO 13879:1999, IDT)
[not adopted]
ISO 13879:1999 MOD
GSO ISO 13879:2008
ISO 13880:1999
ed. 1
Petroleum and natural gas industries -- Content and drafting of a technical specification
TC 67
WG 2
ST RK ISO 13880:2004 (ISO 13880:1999, IDT)
[not adopted]
ISO 13880:1999 MOD
GSO ISO 13880:2008
ISO/TR 13881:2000
ed. 1
Petroleum and natural gas industries -- Classification and conformity assessment of products, processes and services
TC 67
WG 2
ST RK ISO/TR 13881:2006 (ISO/TR 13881:2000, IDT)
CEN ISO/TR 13881:2011
ISO/TR 13881:2000 MOD
GSO ISO TR 13881:2008
ISO/TS 17969:2015
ed. 1
Petroleum, petrochemical and natural gas industries -- Guidelines TC 67 on competency for personnel
WG 2
ISO/TS 29001:2010
ed. 3
ISO/TS 29001:2003; ISO/TS 29001:2007
Petroleum, petrochemical and natural gas industries -- SectorTC 67 specific quality management systems -- Requirements for product and service supply organizations
WG 2
ABNT ISO/TS 29001 : 2010
ST RK ISO/ТС 29001:2006 (ISO/TS 29001:2003, IDT); ST RK ISO/ТС 29001 (ISO/TS 29001:2010, IDT) under development
API Spec Q1 9th ed.:2013 (MOD)
ISO 14224:2006
ed. 2
ISO 14224:1999
Petroleum, petrochemical and natural gas industries -- Collection and exchange of reliability and maintenance data for equipment
TC 67
WG 4
ABNT NBR ISO 14224:2011
ST RK 1268:2004 (ISO 14224:1999, MOD)
API Std 689 1st edition / EN ISO 14224:2006 ISO 14224:2006 (IDT)
ISO 14224:2006 MOD
GSO ISO 14224:2008
ISO 15663-1:2000
ed. 1
Petroleum and natural gas industries -- Life cycle costing -- Part 1: TC 67 Methodology
WG 4
ST RK 1265-1:2004 (ISO 156631:2000, MOD)
EN ISO 15663-1:2006
ISO 15663-1:2000 IDT
GSO ISO 15663-1 : 2008
ISO 15663-2:2001
ed. 1
Petroleum and natural gas industries -- Life-cycle costing -- Part 2: TC 67 Guidance on application of methodology and calculation methods
WG 4
ST RK 1265-2:2004 ( ISO 156632:2001, MOD)
[not adopted]
ISO 15663-2:2001 IDT
GSO ISO 15663-2 : 2008
ISO 15663-3:2001
ed. 1
Petroleum and natural gas industries -- Life-cycle costing -- Part 3: TC 67 Implementation guidelines
WG 4
ST RK 1265-3:2004 (ISO 156633:2001, MOD)
[not adopted]
ISO 15663-3:2001 IDT
ISO 20815:2008
ed. 1
Petroleum, petrochemical and natural gas industries -- Production TC 67 assurance and reliability management
WG 4
ST RK ISO 20815:2011 (ISO 20815:2008, IDT)
EN ISO 20815:2010
ISO/TR 12489:2013
ed.1
Petroleum, petrochemical and natural gas industries -- Reliability modelling and calculation of safety systems
TC 67
WG 4
ISO 13085:2014
ed. 1
Petroleum and natural gas industries -- Aluminium alloy pipe for use as tubing for wells
TC 67
WG 5
ISO 15546:2011
ed. 3
Petroleum and natural gas industries -- Aluminium alloy drill pipe
TC 67
WG 5
ISO 20312:2011
ed. 1
Petroleum and natural gas industries -- Design and operating limits of drill strings with aluminium alloy components
TC 67
WG 5
ISO 27627:2014
ed. 1
Petroleum and natural gas industries -- Aluminium alloy drill pipe t TC 67
WG 5
ISO 15156-1:2015
ed. 3
ISO 15156-1:2001; ISO 15156-1:2009
Petroleum and natural gas industries -- Materials for use in H2Scontaining environments in oil and gas production -- Part 1: General principles for selection of cracking-resistant materials
TC 67
WG 7
ST RK ISO 15156-1:2011 (ISO 15663-1:2000, IDT)
ISO 15156-2:2015
ed. 3
ISO 15156-2:2003; IS Petroleum and natural gas industries -- Materials for use in H2S-c TC 67
WG 7
ST RK ISO 15156-2:2011 (ISO 15 NACE MR0175-2015 / IS EN ISO 15156-2:2015 [status: to be published soo GB/T 20972.2-2008 ISO 15 GOST ISO 15156-2-20 GSO ISO 15156:2:2008
ISO 15156-3:2015
ed. 3
ISO 15156-3:2003; ISO 15156-3:2003
TC 67
WG 7
ST RK ISO 15156-3-2011 (ISO 15663-3:2001, IDT); GOST ISO 15156-3-2012 (ISO 15156-3:2009, IDT)
ST RK ISO 23936-1:2011 (ISO 23936-1:2009, IDT)
ISO 23936-1:2009
Cor 1: 2009
ISO 15546:2002; ISO 15546:2007
Petroleum and natural gas industries -- Materials for use in H2Scontaining environments in oil and gas production -- Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
ed. 1
Petroleum, petrochemical and natural gas industries -- Non-metalli TC 67
WG 7
ISO 23936-2:2011
ed. 1
Petroleum, petrochemical and natural gas industries -- Non-metalli TC 67
WG 7
ISO 21457:2010
ed. 1
Petroleum, petrochemical and natural gas industries -- Materials s TC 67
WG 8
ISO 17945:2015
ed. 1
Petroleum, petrochemical and natural gas industries -- Metallic ma TC 67
API RP 2MOP 1st edition (IDT)
CAN/CSA ISO/TR 199052:14
EN ISO 16961:2015
CEN ISO/TS 17969:2015 CEN ISO/TS 29001:2011
GOST R ISO/TS 29001:2007 (ISO 29001:2010, IDT), TC 10
GSO ISO TS 29001 : 2012
GSO ISO 15663-3 : 2009 GOST R ISO 20815GSO ISO 20815 : 2009 2013 (ISO 20815:2015, IDT), TC 023
FprCEN ISO/TR 12489 [status: under publication]
ST RK ISO 15546-2011 (ISO 15546:2007, IDT)
NACE MR0175-2015 / ISO 15156 Series:2015
NACE MR0175-2015 / ISO 15156 Series:2015
ST RK ISO 21457:2011 (ISO 21457:2010, IDT)
EN ISO 13085:2014
GB/T IDT Under Revision
EN ISO 15546:2011
GB/T 20659 IDT Under Revision
EN ISO 20312:2011
GB/T IDT Under Revision
EN ISO 27627:2014
ISO 27627:2014
EN ISO 15156-1:2015 [status: to be published soon]
GB/T 20972.1-2007 ISO 15156-1:2001, IDT
EN ISO 15156-3:2015 [status: to be published soon]
GB/T 20972.3-2008 ISO 15156-3:2003, MOD
EN ISO 23936-1:2009
GB/T IDT Under Revision
EN ISO 23936-2:2011
GB/T IDT Under Revision
EN ISO 21457:2010
ISO 21457:2010
EN ISO 17945:2015
GSO ISO 15546 : 2009 (2nd edition) (in revision )
GOST ISO 15156-12013 (ISO 151561:2009, IDT), TC 023 GOST ISO 15156-32012 (ISO 151563:2009, IDT), TC 023
GSO ISO 15156:1:2008 (under revision )
GSO ISO 15156:3:2008 (under reviosn)
For further information and publications, visit the website at
http://www.iso.org