Hse Interview Questions - Various Project Sites [PDF]

Zitiervorschau

HSE INTERVIEW QUESTIONS - VARIOUS PROJECT SITE PP13 PROJECT SITE A.

GAMA Questions

1.

Definition of health safety environment

2.

Definition of terms hazard risk incident accident near miss etc.

3.

What is confined space

4.

What is work permit

5.

Requirement of lifeline

6.

Requirement of scaffolding

7.

Requirement of lifting with cranes

8.

Requirement of hot work

9.

What is the responsibility of a safety professional

10.

Name different types of hazards

11.

What are the different types of material handling equipment

12.

What is requirement of man lift

13.

When do you require to use a full body harness

14.

What is critical lift and non critical lift

15.

How to promoting safety culture

16.

First requirement of 60 mtr height scaffolding

17.

Requirement of man basket

18.

Requirement of suspended scaffolding.

19.

Requirement of crane

B.

WORLEYPARSONS

1.

What is the difference between flash back arrestor and whiplash arrestor

2.

What is you weakness

3.

What is your strength

4.

How can you improve the safety culture of your organization?

5.

If your construction manager is not interested in safety how will you convince him to follow safety?

6.

What is the amount of light required for various construction activity at night ?

7.

What is the difference between an engineered lift and a non engineered lift

8.

What are the requirements for a scaffold that is higher than 38 meters ?

9.

What are the requirements of a life line

10.

What are the parts of a safety management plan

11.

What is ,100 tie off

12.

What is the most important work of a safety officer

13.

What is confined space

14.

What is the ANSI code for helmet shoes and other PPE

15.

What is flash back arrestor

16.

What is whip check

17.

What is work at height

18.

Who is a competent person

19.

How many persons to a toilet at site

20.

When does an excavation become a confined space

21.

For a grinding machine which RPM should be greater the shaft Rpm/ disc rpm

22.

What is the standard for helmet

23.

What is the calculation you use for lifting operations

There are 3 sections in the worley paper 1)written 15 questions to be answered in paragraph 2)practical -10 photographs will be given and the number of hazards in each photo have to be circled and the type of hazard written on the back of the photo,at least ten hazards have to be identified on each photo 3)interview cum practical will make sketch of crane and ask how the load calculations are done? Will show hand grinder or other such implements and ask about the hazards associated with it like seaman switch guards which rpm should be greater the spindle or the disk?

Ramzil - Interview questions [PP13] 1-What is your strength as safety officer 2-What is your weakness 3- how convince your construction manager 4- what is risk 5- what will do your first week job 6- What is GFCI 7- What is 100% tie- of 8- What is your last site biggest challenge 9-what is risk 10- What is work permit system? 11-Why is an excavation deeper than 1.2 meters considered as a confined space 12-What are the duties of hole watch and fire watch 13- Requirements of a scafold that is 60 meters in height 14- Man lift and man basket operation

PETROFAC – JAZAN Site A.

GENERAL

1.

Brief me about your experience and qualification

2.

Brief introduction of daily activity as as safety officer in your previous company

3.

What is JSA and knowledge of preparing JSA

4.

What is accident and Incident

5.

What emergency evacuation

6.

What is the important of assembly point

7.

What is the common hazards in construction field

8.

What is the definition of confines space.

9.

What is the important of Safety program.

10.

What is the minimum oxygen% in atmosphere.

11.

What is Tool Box meeting(TBT) and demonstration of TBT

12.

What is work permit system

13.

What is work at height and what is the minimum level to work without FBH

14.

What is LEL and UEL

15.

What is house keeping

16.

Safety rules while using Scaffolding, ladder, compressed air, working in confined space etc.

17.

What is “PASS”

18.

Types of fire extinguishers and usage of different industry

B.

TYPE

OF

QUESTION

IN VARIOUS INTERVIEWS

TYPE #1: a) Personal Details. b) Certificate Verification and Question about It. c) Details of Course. d) Confined Space (What is Confined Space? What are The Requirements? ). e) Hot Works. f)

What are Scaffolds and Details?

TYPE #2 a) Past working experience and what are the activities in the company. b) Certificate verification and details of course.

c) Qualification details and certificate. d) What are the types of work permit issued in this Site? e) What is Confined Space and what are the requirements? f)

How you test Gas Jams with Gas Detector device in Confined Space?

g) What is the Percentage of Oxygen Required? h) What is the level of Hydrogen Sulfide in Confined Space? i)

If Hydrogen Sulfide is 5 PPM then you will allow to do work in Confined Space.

j)

What are the parts in Scaffolding?

k) What are the types of Scaffolds? l)

According to OSHA of which height the FBH must Worn.

m) What are types of Respiratory Apparatus? n) What are Precautions You take in Printing Activity? o) How do you check the Air Impurities?

TYPE #3 a)

Regarding your job description on your CV.

b)

What is Emergency Evacuation?

c)

What is Confined Space?

d)

Lifting Procedures

e)

PTW System.

f)

Site Inspection Procedures.

g)

How to approach people when doing Un Safe Act?

h)

What is Confined Space?

i)

Lifting Procedures

j)

Why ARAMCO Choose HIDADA For the Project?

k)

Job Description on CV

l)

Scaffolding

m)

Confined Space

n)

Lifting

o)

Incident Report

p)

What is Work Permit?

q)

Types of Work Permit?

r)

Why PETROFAC Give Contract to HIDADA?

s)

What is Scaffolding?

t)

Type of Scaffolding?

u)

Importance of JSA.

v)

What are the Advantages of JSA?

w)

Causes of Hazards in Construction.

x)

Previous Experience.

y)

What is Confined space and what are the Requirements?

z)

What is the Emergency procedure When Fire Happened in Site?

aa)

What are the LTI, TLV and Give Some Example?

ab)

In Site You found a worker in un conscious then How Can You Treat and will you do?

ac)

You Imagine You Are a Clint and I am Your Contractor Then What Qualities You See the Contractor. When it will give a project?

ad)

What is The Safety Officer Duties?

ae)

What is the Key Elements of HSE Policy?

af)

What is the Toxic Gas and which is the most Toxic Gas?

ag)

What is Confined space?

ah)

What are Role of Confined Space Stand Boy / Attendant Boy.

ai)

Working at Height.

aj)

If Emergency What to do?

ak)

Permit to Work.

al)

What is Hazard & Precaution in Hot work?

am)

Previous Work & Responsibility.

an)

What Are the Toxic Gases?

ao)

What are the VEL & LEL of Toxic Gases?