Gnom Kex [PDF]

Zitiervorschau

Cupcake gnome. @happydolls_pattern

#happydolls_pattern

Hi! My name is Julia. I like creating different characters and bringing them to life with the help of my magic crochet hook.

If you have any questions or difficulties with this pattern, please write me on Etsy Conversation.

Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern

Materials needed: 1. YarnArt Jeans, 55% cotton, 45% acryl, 50g/160m, next colors: • • • • • •

for for for for for for

body – brown color № 71 hat – pink color № 20 and № 78 beard and hat – white color № 62 cherry – red color № 51 leave – green color № 52 nose – beige color № 05

2. Crochet hook 2 mm or 2.25 mm (US: B, UK:14) 4. Holofiber, thick sewing needle, pins. 5. Piece of cardboard 4 on 4 inch for one gnome’s base. If you follow this advice your gnome will be 20 cm Yarn tip: cotton/acryl or cotton 100%

Abbreviations: ch – chain stitch st - stitch sc – single crochet hdc – half double crochet dc – double crochet tr – treble crochet sl st – slip stitch inc – increase, 2 sc in the next sc dec – decrease, sc2tog, single crochet 2 stitches together (16) – number of stitches in a round (inc, sc)*N – repeat N times BLO – back loop only

Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern

Body. With brown yarn. IMPORTANT! Pay attention different descriptions for small gnomes.

on big

the and

Start with making a round base. Work in continuous rounds without slip stitches. Rnd 1: 7 sc in the MR Rnd 2: 7 inc

(14)

Rnd 3: (inc, sc)*7

(21)

Rnd 4: (inc, 2 sc)*7 (28) Rnd 5: (inc, 3 sc)*7 (35) Rnd 6: (inc, 4 sc)*7 (42) Rnd 7: (inc, 5 sc)*7 (49) Rnd 8: (inc, 6 sc)*7 (56) Rnd 9: (inc, 7 sc)*7 (63) Сut the base of cardboard. Rnd 10: BLO 63 sc Connect the white yarn: Rnd 11: 63 sc With brown yarn:

Rnd 12: 63 sc in each stitch. Connect the pink yarn:

Rnd 13: 63 sc in each stitch. With brown yarn:

Rnd 14-29: sc in each stitch around 16 rounds for big gnome.

Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern

For small gnome Rnd 14-24: sc in each stitch around 11 rounds. Then proceed to crocheting 30 rnd. Insert the cardboard base. Rnd 30: (dec, 19 sc)*3 (60) Rnd 31: (dec, 13 sc)*4 (56) Rnd 32: 6 sc,(dec, 12 sc)*3, dec, 6 sc (52) Rnd 33: (dec, 11 sc)*4 (48) Rnd 34: 5 sc,(dec, 10 sc)*3, dec, 5 sc (44) Rnd 35: (dec, 9 sc)*4 (40) Rnd 36: 4 sc,(dec, 8 sc)*3, dec, 4 sc (36) Stuff the body evenly and firmly with the holofiber. Rnd 37: (dec, 7 sc)*4 (32) Rnd 38: 3 sc, (dec, 6 sc)*3, dec, 3 sc (28) Rnd 39: (dec, 5 sc)*4 (24) Rnd 40: 2 sc,(dec, 4 sc)*3, dec, 2 sc (20) Rnd 41: (dec, 3 sc)*4 Rnd 42: 8 dec

(16)

(8)

Cute the yarn, leave a long end. Add some more holofiber. Close the top using a needle, tie off and hide the end into the body.

Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern

Hat for big Gnome. Start with pink yarn. Work in turning crochet with BLO.

rows,

each

row

to

Chain 41, start with the 2nd loop from the hook. R1: 40 sc R2: ch 1, dec, 37 sc, inc

(40)

Connect the white yarn: R3: ch1, inc, 37 sc, dec

(40)

R4: ch1, dec, 37 sc, inc

(40)

With pink yarn: R5: ch1, inc, 37 sc, dec

(40)

R6: ch1, dec, 37 sc, inc

(40)

Repeat rows R3 – R6 12 more times. You should get 54 rows in total. Cut the pink yarn only. With white yarn: R55: ch1, inc, 37 sc, dec

(40)

Try on a hat on the gnome, it must freely fit the body. Fold the hat so that its edges are placed against each other, forming a ring. Connect the edges of the base with a row of 40 sl st, inserting the hook into the back loop of the last row and into the corresponding loop from primary chain of ch’s at the same time. Cut the yarn, leave a long end. Tighten the hole with a needle, tighten the loop, cut the end of the thread. Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern

Hat for small Gnome. Start with pink yarn. Work in turning crochet with BLO.

rows,

each

row

to

Chain 35, start with the 2nd loop from the hook. R1: 34 sc R2: ch 1, dec, 31 sc, inc

(34)

Connect the white yarn: R3: ch1, inc, 31 sc, dec

(34)

R4: ch1, dec, 31 sc, inc

(34)

With pink yarn: R5: ch1, inc, 31 sc, dec

(34)

R6: ch1, dec, 31 sc, inc.

(34)

Repeat rows R3 – R6 12 more times. You should get 54 rows in total. Cut the pink yarn only. With white yarn: R55: ch1, inc, 31 sc, dec

(34)

Try on a hat on the gnome, it must freely fit the body. Fold the hat so that its edges are placed against each other, forming a ring. Connect the edges of the base with a row of 34 sl st, inserting the hook into the back loop of the last row and into the corresponding loop from primary chain of ch’s at the same time. Cut the yarn, leave a long end.

Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern

Tighten the hole with a needle, tighten the loop, cut the end of the thread.

Arms for big Gnome. Start with the pink yarn. Rnd 1: 6 sc in the MR, go on in continuous rounds without slip stitches. Rnd 2: 6 inc

(12)

Rnd 3: 12 sc Rnd 4: 12 sc Rnd 5: 5 sc, 1 puff stitch, 6 sc (13) Rnd 6: 5 sc, dec (two stitches of puff stitch), 5 sc (12) Connect white yarn. Rnd 7: BLO 12 sc Rnd 8: 12 sc Connect brown yarn. Rnd 9-17: sc in each stitch around 9 rounds. Stuff the bottom part of the arm (palm) with stuffing material, you don’t have to stuff the top part of the arm.

Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern

Then squeeze the hole of the hand so that the stitches of the last round line each other. Crochet the opposite stitches with 5-6 sc.

Cut the yarn, leave a long end for sewing. Repeat the same for the second arm.

Arms for small Gnome. Start with the pink yarn. Rnd 1: 6 sc in the MR, go on in continuous rounds without slip stitches. Rnd 2: 6 inc

(12)

Rnd 3: 12 sc Rnd 4: 12 sc Rnd 5: 5 sc, 1 puff stitch, 6 sc (13) Rnd 6: 5 sc, dec (two stitches of puff stitch), 5 sc (12) Connect brown yarn. Rnd 7: BLO 12 sc Rnd 8-13: sc in each stitch around 6 rounds. Stuff the bottom part of the arm (palm) with stuffing material, you don’t have to stuff the top part of the arm.

Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern

Then squeeze the hole of the hand so that the stitches of the last round line each other. Crochet the opposite stitches with 5-6 sc. Cut the yarn, leave a long end for sewing. Repeat the same for the second arm.

Nose. With beige yarn. Rnd 1: 7 sc in the MR, go on in continuous rounds without slip stitches. Rnd 2: 7 inc

(14)

Rnd 3: (inc, 1 sc)*7

(21)

Rnd 4: (inc, 2 sc)*7

(28)

Rnd 5: 28 sc Rnd 6: (dec, 2 sc)*7

(21)

Rnd 7: (dec, 1 sc)*7

(14)

Rnd 8: 7 dec

(7)

Cute the yarn, leave a long end. Add some holofiber. Close the top using a needle.

Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern

Beard. With white yarn. Work in continuous rounds without slip stitches. Rnd 1: 7 sc in the MR Rnd 2: 7 inc

(14)

Rnd 3: (inc, sc)*7

(21)

Rnd 4: (inc, 2 sc)*7 (28) Rnd 5: (inc, 3 sc)*7 (35) Rnd 6: (inc, 4 sc)*7 (42) Rnd 7: (inc, 5 sc)*7 (49) Rnd 8: ch 3, *leave 1 st previous round, 1 sc, repeat from * Cute the yarn, hide the end.

Cherry for decoration. With red yarn. Big cherry. Rnd 1: 7 sc in the MR, go on in continuous rounds without slip stitches. Rnd 2: 7 inc (14) Rnd 3: (inc, 1 sc)*7

(21)

Rnd 4: (inc, 2 sc)*7

(28)

Rnd 5-6: sc in each stitch around 2 rounds. Rnd 7: (dec, 5 sc)*4

(24)

Rnd 8: (dec, 1 sc)*8

(16)

Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern

Rnd 9: 8 dec

(8)

Cute the yarn, leave a long end. Add some holofiber. Close the top using a needle. Small cherry. Rnd 1: 6 sc in the MR, go on in continuous rounds without slip stitches. Rnd 2: 6 inc (12) Rnd 3: (inc, 1 sc)*6

(18)

Rnd 4: (inc, 2 sc)*6

(24)

Rnd 5: sc in each stitch around. Rnd 7: (dec, 6 sc)*3

(21)

Rnd 8: (dec, 1 sc)*7

(14)

Rnd 9: 7 dec

(7)

Cute the yarn, leave a long end. Add some holofiber. Close the top using a needle. Crochet 2 big cherries and 2 small ones.

Leaves. With green yarn. Crochet 2 leaves. Chain 8, start with the 2nd loop from the hook. 1 sc, 1 hdc, 2 dc, 1 hdc, 1 sc, in last stitch:(sl st, ch 1, 1 sl st), work along the other side of the foundation chain: 1 sc, 1 hdc, 2 dc, 1 hds, 1 sc. Cut the yarn, leave a long end for sewing.

Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern

Twig. With green yarn. Chain 21, start with the 2nd loop from the hook, 20 sl st. Cut the yarn, leave a long end for sewing.

Sew the cherries and leaves to the twig.

Assembly and decoration. Attach the arms, beard and nose to the body with some pins. The lower edge of the beard should be between 17 and 18 rows of the body. Attach the arms between 24 and 25 rows of the body for small gnome, and between 28 and 29 rows of the body for big gnome. Attach the nose in the center of the beard.

Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern

Put on the hat. The top of arms and nose should be placed under the hat. Move them the way you like. Take off the hat, sew the arms, beard and nose to the body. Put on the hat and attach it to the body with hidden stitches. Congratulations! Your Cupcake Gnomes are ready) I hope you enjoyed the process and now feel happy with the result! It’s high time to hug your toys!

Don’t forget to share your final result on Instagram, using #happydolls_pattern hashtag. Coping material, sharing it on another website and publishing it without the author permission is forbidden. If you want to sell the Cupcake Gnome, please, mention the author. My Instagram @happydolls_pattern