42 1 734KB
Index
Introduction .......................................................................................................................... 2 Our Team ............................................................................................................................... 4 Support .................................................................................................................................. 7 Our Products ......................................................................................................................... 8 ESurvey CADD ....................................................................................................................... 8 ESurvey Civil Tools .............................................................................................................. 9 ESurvey Water .................................................................................................................... 10 ESurvey Trans..................................................................................................................... 11 ESurvey CAD Online ........................................................................................................... 12 Why ESurveying Products ................................................................................................ 13 Video Tutorials ................................................................................................................... 15 ESurvey AutoLISP Command Reference ........................................................................ 16 ESurvey Common Commands Reference ....................................................................... 16 ESurvey CADD Command Reference .............................................................................. 22 ESurvey LISPs Command Reference ............................................................................... 30 ESurvey Civil Tools Commands Reference .................................................................... 39 ESurvey Water Command Reference.............................................................................. 48 ESurvey Trans Command Reference .............................................................................. 53
1
Introduction ESurveying Softech India Private Limited is a prestigious firm with its base in Bengaluru, India. ESurveying Softech offers powerful software solutions to Civil Engineers and Surveyors. People use our products to develop better, more presentable drawings and accurate reports. Out products are economically priced, easy to use and capable of addressing most of the civil engineering and geometric design requirements. Although we are headquartered at Bangalore, we are serving clients all over India and the world. With our proven expertise of best-in-class technology, we help you to prepare estimates and drawings quickly. We have thousands of happy customers across India and the world. The key to our success is simple – we believe in delivering complete solutions which involve dispatching and installing the product, training, hand holding and giving industry’s best online support.
Vision See a day when all the surveyors use the same technology solutions happily and deliver the state-of-the-art, and quality end results within shortest possible time.
2
Mission • • • •
Develop professional and intuitive software solutions at an affordable cost Share knowledge on latest Survey techniques in the way of Blog Brining all the surveyors under one common discussion place by way of Forum Training the customers effectively by using the latest technology tools
Ultimately help Survey Community to improve knowledge, apply technology and increase productivity.
About Us Our motto is to bring a revolution in the survey drawings and scale it to a new height. We intend to do this by constantly delivering effective services, and introducing cutting edge technology at an affordable price.
3
Our Team The company was founded in 2008 by Mr. Kotaa Krishna Kamath, who has more than 16 years of experience in software product development for domestic and international markets. The company was initially known as E Surveying Solutions and was named a private limited company in 2011. ESurveying fraternity consists of people who work towards bringing survey community together by utilizing the engineering and software skills. Among us are specialists in object-oriented programming languages, professionals in computer graphics, and team of proficient marketing members. Our team is headed by the proficient technical heads - Mr. Kotaa Krishna Kamath, Mr. Sunil Kulkarni and Mr. Murali Babu.
Kotaa Krishna Kamath Mr Kotaa Krishna Kamath, Managing Director, ESurveying Softech (India) Pvt. Ltd. has more than 16 years of experience in software product development for domestic and international market. He has architected many products in the area of Office Automation, Taxation and Survey engineering domains. India’s Highest selling Payroll product, Saral PayPack and TDS Package Saral TDS were initially developed under his guidance. He has experience in different technologies and 4
specialization in Microsoft and AutoDesk Technologies. He holds a degree in Mechanical Engineering from Karnataka University, Dharwad and has held Mid/Senior management positions in mid-size companies and has served as a Director for Relyon Softech Limited for seven years.
Sunil Kulkarni Mr Sunil Kulkarni has more than 17 years of product development experience for domestic and international markets. He has worked with clients of various countries, managed and lead the product(s) in Bioinformatics, Fashion Retail, Production and Survey Engineering domains. He has experience in different technologies and specialization in Microsoft Technologies. He has developed and implemented complex algorithms for Bio-informatics, Fashion Retail and Survey Engineering Products. He holds an engineering degree in Computer Science from Karnataka University, Dharwad and has held Mid/Senior management positions in mid-size companies.
Ayanakanti Murali Babu Mr Ayanakanti Murali Babu is the Road Design Domain Expert at ESurveying and has automated many processes related to Road Designing by using his extraordinary skills in Microsoft Excel that comes from his rich experience of fifteen years in Designing National Highway, Rail and Road Designs. With vast experience in preparing detailed 5
project reports, feasibility reports and other reports pertaining to various types of roads, the Expert has also been involved in several execution projects in the capacity of Project Manager, Highway Engineer, Chief Surveyor, etc. In his early years, he has also rendered services to many esteemed companies varying from consultants, Contractors and Concessionaire.
6
Support ESurveying Softech (India) Pvt. Ltd. believes that the key to success for any product lies not just with the quality of the product alone, but also with the service and support that is provided with it. Also, we consider “Support” to be a boon rather than a bane. We therefore provide the best help and support ensuing from the product. For any kind of queries and clarifications regarding the product, kindly contact our customer support at:
• • • •
Support: +91-80-23491717, +91-80-23191818, +91-8023191414 [All working Days: 10.00 AM - 8.00 PM IST or 4:30AM to 02:30 PM GMT] Mail us at: [email protected] Online Support with Remote Access by Team Viewer
7
Our Products ESurvey CADD
Infrastructure Engineering and Design Solutions •
•
•
Collection of Solutions to meet all the requirements related to preparation of Drawings and Reports related to Site, Road, Canal, Railway & Infra Projects Section, Contour, Earthwork, Lisp, Topodraw, Interpolate, KML, Road Design, Vertical Optimisation, Traverse Correction, Road Alignment +, CAD Layout, Strip Plan, Elevation Extraction and Image Download from Google Earth. Create Industry Standard Drawings and Generate Instant Calculation Reports related to Road Design Projects. With the highly efficient and easy to use modules in this package which are very useful to help you save considerable time.
8
ESurvey Civil Tools
A Bunch of Efficient Drafting, Analysis and Design Solutions •
Collection of solutions related to Infrastructure Engineering for better drafting, design and analysis
•
Land Division and Measurements, Quick Section, Road Network, Parcels, Tippan and Tunnel Sections.
•
Prepare Layout Drawings, Land Utilization Report, Convert Alignment Data as Cross Section and Longitudinal Section Drawings in CAD, Prepare Plan, Profile and CS for Road Network, DPR for Land Acquisition, Tippan Drawings and obtain Tunnel Area Calculation for Excavation, Undercut and Over Profile. 9
ESurvey Water
Water Resource Solutions •
Collection of Optimum Water Resource Solutions for better drafting, design and analysis.
•
Bund, Water Network, Ayacut and Sewer Network
•
Create Tank Bund Cross Sections
•
Prepare Plan and Profile Drawings for Water Network Project
•
Prepare DPR for Extraction of Irrigated Area within Chalk, Compute Percentage of Village Survey Boundary
•
Design Optimised Sewer Network for a locality, or entire city.
10
ESurvey Trans
Traffic & Pavement Analysis • • • • •
• •
Collection of Solutions for Management of Traffic Data and Pavement Analysis Industry Standard Solutions as per IRC Guidelines for Flexible Pavement Design Analysis of BBD (Benkelman Beam Deflection), Calculation of Characteristic Deflection by Importing Surveyed Data Calculate MSA (Million Standard Axles), VDF (Vehicle Damage Factor) from Traffic Survey Data Traffic Analysis to find Commercial Vehicles Per Day, Traffic Volume Count, Average Daily Traffic and Average Annual Daily Traffic. Generation of Origin Destination Matrix and Export to CAD for Traffic Analysis Analysis of Vehicle Registration Number Plate Survey 11
ESurvey CAD Online
www.esurveycad.com Infrastructural Engineering Solutions Online •
Create Longitudinal Sections and Cross Sections
•
Prepare Earthwork Calculations (Quantity Takeoff)
•
Convert KML to CAD Drawing
•
Prepare Contour Maps with Grid Elevations
•
Extract Elevation from Geo Browser Google Earth
•
Extract Image Tiles from Geo Browser Google Earth
12
Why ESurveying Products Our Software are designed considering the fact that even operators and engineers with basic CAD software knowledge can generate the required output without getting into lengthy training procedures, big manuals, memorising operation sequences or navigating through multiple windows. Our packages aim at improving work force efficiency by saving time and increasing productivity.
Better Product Design •
•
Our products are designed to work with native CAD entities and generate outputs in simple native CAD entities, for those who are familiar with CAD Works independent of CAD Software to help the users who are not familiar with regular CAD Software.
By Making the Learning Curve Smaller • •
Short and clear e-Tutorials for smart learning Manuals are designed with pictorial representations for better and faster understanding.
13
Better Support • •
ESurveying Softech is equipped with Remote Desktop Sharing Technology to instantly solve your queries. In addition to this, we also provide telephonic / email support, when required
Through Affordable Pricing • •
We design each requirement as a different module and hence only required modules can be procured. By developing quality software, we reduce the support cost and hence our software are economically priced.
Some Common Features of our Software •
Works with any CAD Software that supports Lisp
•
Quick & Accurate Outputs
•
Includes Lisp utilities to help faster data preparation
14
Video Tutorials At ESurveying Softech, we have made it very easy to learn and use our products by developing video tutorials. By watching these tutorials, you can easily learn how to use the software modules, and start working quickly. We know that most of our customers are regular users of the Internet and to help them with instant support, we have developed online help, videos and online courses. These training resources will help the users to understand the product in a better way. The usage of every module in ESurveying Software is explained in detail in the respective product page, in our website www.esurveying.net. Also, to make usage of products easy and hassle-free, ESurveying Softech (India) Pvt. Ltd provides one-time dedicated online training to all its customers, where users will be educated on the usage of the product in detail. The duration of the training is limited. In addition to training during purchase, we also conduct Training in Major Cities depending on Customer requests.
15
ESurvey AutoLISP Command Reference ESurvey Common Commands Reference Sl. No.
Command Description
Command Shortcut
PREPARE DRAWINGS 1 Reverse Polyline Direction
RPL
2 Remove Elevation from Polyline Vertices
RZ
3 Convert Connected Lines to Polyline
PJ
4 Mark Polyline Direction
MRKD
5 Mark Chainages
MCH
6 Chainages along 3D polyline
3DMCH
7 Rotate Text w.r.t. angle of selected Points
RT
8 Insert Block at Ends and Intersections
IBEI
3D POLYLINE 9 10
Create 3D Polyline by Selecting Elevation Text (Elevation as Text) one by one Create 3D Polyline by Selecting Elevation Text (Elevation as Text) in a Group
3DET 3JET
16
Sl. No.
Command Description
Create 3D Polyline by Selecting Elevated Text one by one Create 3D Polyline by Selecting Elevated Text in a 12 Group PRINT READY 11
Command Shortcut 3DT 3JP
13 Bulk Plot Settings
BPS
14 Bulk Plot - Fit to Sheet
BPFS
15 Bulk Plot - Given Scale
BPGS
MACRO 16 Select 17 Copy Crossing
CC
18 Erase Window
EW
19 Move Window
MW
LINE TYPE 20 Set Centre line type to selected entity
CEN
21 Set Continuous line type to selected entity
CONT
22 Set Dashed line type to selected entity
DAS
23 Set Dash dot line type to selected entity
DOT
17
Sl. No.
Command Description
24 Set Hidden line type to selected entity
Command Shortcut HID
UNITS 25 Set the unit precision to 0
UN0
26 Set the unit precision to 1
UN1
27 Set the unit precision to 2
UN2
28 Set the unit precision to 3
UN3
29 Set the unit precision to 4 ZOOM 30 Zoom to display the drawing extents
UN4
31 Zoom to display the previous view Zoom to display a window defined by a Centre 32 Point Zoom to display the generated portion of the 33 drawing with a view box
ZP
34
Zoom to display an Area specified by the opposite corners of a rectangular window
ZE
ZC ZD ZW
35 Zoom the display at a specified scale factor
ZS
36 Zoom Out
Z8
18
Sl. No.
Command Description
Command Shortcut
MISCELLANEOUS 37 Erase last drawn entity
ELT
38 Turn off Osnap
OS0
39 Quick quit (without saving)
QY
40 Break Line at given Point
BRK
41 Display block name of selected entity
BN
42 List DXF details of a selected entity
LDXF
43 Undo back for any Lisp from ESurvey
UB
LAYER 44 Set the Bylayer property of the entities
BY
45 Set the Layer of picked entity
LSET
46 Change Layer of selected entities to Current Layer
LC
47 Delete the Objects of selected entities Layer
DSL
48 Quickly Create a New Layer
QL
49 Set specified Layer as Current Layer
MCL
50 Rename Layer
RN
LAYER ON OFF 51 Switch OFF Layers on the basis of Entity Pick
OF 19
Sl. No.
Command Description
Command Shortcut
52 Keep selected Layers ON
SLO
53 Switch OFF Layers by specifying Layer Name
OFN
54 Switch ON the Layers
ON
55 Switch OFF all the Layers except the current Layer
OFF
56 Switch ON all the Layers
ONN
LAYER FREEZE THAW 57 Freeze the Layer on the basis of entity pick
FR
58 Freeze Layers by specifying Layer Name
FRN
59 Thaw Layers by specifying Layer Name
THN
60 Freeze all Layers
FRR
61 Thaw all Layers
THH
LAYER LOCK UNLOCK 62 Lock Layer 63 Unlock Layer 64 Lock Layer by Specifying Layer Name
LK UL LKN
65 Unlock Layer by Specifying Layer Name
ULN
66 Lock all the Layers
LKK
67 Unlock all the Layers
ULL 20
Sl. No.
Command Description
Command Shortcut
TEXT PRECISION 68 Change Text Precision to 1 Unit
T1
69 Change Text Precision to 2 Units
T2
70 Change Text Precision to 3 Units
T3
71 Change Text Precision to 4 Units
T4
72
Create Elevation Text from Elevated Entities (Points / Texts / Blocks)
CET
73 Quick Command Reference
QCR
74 Online Command Reference
OCR
21
ESurvey CADD Command Reference
Sl. No. Command Description
Command Shortcut
TRAVERSE CORRECTION 1 Open Traverse Excel Template
OTET
2 Closed Traverse Excel Template
CTET
3 Traverse Correction in CAD
TC
TOPO DRAW 4 Direct TopoDraw
IMTOPO
5 Join Texts based on Text Caption and Distance
JPT
6 Join based on Nearest Point
JP
7 Create Boundary from 2 Points
2PR
8 Create Boundary from 3 Points
3PR
9 Export Point data back to CSV File
EXATTR
CONTOURS 10 Contour Setting
CNS 22
Sl. No.
Command Description
Command Shortcut
11 Generate Contours
CCON
12 Export Elevation
EXEL
13 Export Boundary
EXPB
14 Export Break Lines
EXBL
15 Interpolate at Given Point
ITGP
ANNOTATION 16 Specified Point
ANNP
17 Mid Point
ANNM
18 End Points
ANNE
19 Given Interval
ANNI
20 Fence Selection
ANNF
21 Trim around Contour Text
ANNT
DRAW SECTION 22 Section Setting
DSS
23 Draw Section
DRS
24 Export Section Data to Excel
ESD
EARTHWORK 25 Export Ground
EXEL 23
Sl. No.
Command Description
Command Shortcut
26 Export Formation
EXFR
27 Export Boundary
EXPB
28 Export Surface 29 Select Texts within a Cross Polygon 30 Select Texts within a Window Polygon
EXPS STCP STWP
INTERPOLATE Interpolate using Tin Method 31 At insertion Point of specified Block
ITB
32 At a given Point
ITP
33 At CS LS / Offset Lines Intersection Points
ITI
Interpolate using Straight Line Method 34 Interpolate values at Mid Point
ISM
35 Interpolate values at given Point
ISP
36 Interpolate N values
ISN
37 Interpolate values at given Distance from 1st Text
ISD
Interpolate using 3D Interpolation 38 At a given Point
IDP
39 At CS LS / Offset intersections Points
IDI 24
Sl. No.
Command Description
Command Shortcut
SECTIONS 40 Export Alignment Data
CSA
41 Export LS Data from 3D Polyline
3DLS
42 Export LS Data by selecting Texts
CSS
43 Export LS Data by selecting Polyline
LSEXP
44 Export CS Data by selecting Polylines
CSLE
45 Import Alignment Data
IAL
ROAD DESIGN 46 Export Ground
EXEL
47 Export Alignment
EXAL
48 Export LS Data by selecting Polyline
LSEXP
49 Export Brake Line
EXBL
50 Export Boundary
EXPB
ROAD ALIGNMENT+ Import / Export Export Utilities (Text and Block) distance from 51 alignment
EXBT
25
Sl. No.
Command Description
Import Utilities (Texts and Blocks) at specified X, Y 53 Import Utilities (Blocks) along Alignment 52
Command Shortcut IMBT IMBK
54 Import Utilities (Texts) along Alignment
IMTX
55 Import ROW (Right of Way) Distance
IMOF
Alignment 56 Align text along the alignment line
AlBlk
57 Mark Easting Northing Text along an Alignment
MRTD
58 Extract XYZ along a selected alignment
3DXYZ
59 Move text to nearest point on alignment
MTDA
LS Band 60 Create Band Values 61 Add / Subtract Band Values
CBND MBND
62 Export Remarks from profile(s) Update LS remark by reading text along 63 alignment STRIP PLAN
ExLS
64 Open Strip Plan Template to Enter Data
OSPT
65 Assign Starting Distance
ASD
UPLS
26
Sl. No.
Command Description
Command Shortcut
66 Read Starting Distance
RSD
67 Increment Starting Distance
ISTD
68 Strip Plan
STPL
CAD LAYOUT Read Layout Box Properties from Base Layout 69 Read guiding values from existing Polygon
RpBX
70 Read guiding values from existing viewport
RdBx
Create Layout Box 71 Create layout link box along an Alignment
ALBX
72 Create Horizontal box along a Profile Line
PRBX
73 Create layout box along Datum
DTBX
74 Create horizontal box array with layout link Draw layout link box by Specifying Width and 75 Height Create horizontal / Vertical layout box along an 76 alignment
HrBx DrBX STBX
Divide Layout box 77 Divide Layout Box (Multiple)
DIP 27
Sl. No.
Command Description
78 Divide Layout Box by Specifying Width
Command Shortcut DIBX
79 Edit Layout Box Properties 80 Edit attached layout link for selected box
EdBx
81 Bulk update layout link for selected boxes
BlBx
Layout Box Layer Management 82 CAD Layout Layers
CLLS
83 Switch off layers related to cad layout (lb_???)
LBOF
84 Switch on layers related to cad layout (lb_???)
LBON
Delete Layout Box or Layouts 85 Delete all auto generated layouts
DLB
86 Delete all the entities in lb_??? Layer
DSLB
87 Create Layouts
CrBx
Update Layout Content 88 Increment Layer Text in Layouts
InLO
89 Update Value of Layer Texts in Layouts
UpLO
90 Copy Text from Base Layout to Created Layouts
CpLO
ESURVEY KML 91 Export entities to KML
KMLE 28
Sl. No.
Command Description
Command Shortcut
92 Import KML File
KMLI
93 Set Map Datum
SDS
94 Find Lat Long of a Point
FLL
95 Mark Lat Long Points along a Line
MLL
GOOGLE EARTH 96 Read Credit available from www.esurveycad.com
RCR
97 Set Map Datum
SDS
98 Set Map Type
MTYPE
99 Image Tile Dimension
MSIZE
100 Mark Image Tiles for a selected Alignment
MIA
101 Mark Image Tiles for a selected Boundary
MIB
102 Extract Image from Google Earth
GEI
103 Mark Lat Long Block along selected Alignments
MLA
104 Mark Lat Long Block for a selected Boundary
MLB
105 Extract Elevation from Google Earth
GEE
106 Quick Command Reference
QCR
107 Online Command Reference
OCR
29
ESurvey LISPs Command Reference
Sl. No. Command Description
Command Shortcut
TEXT 1 Rotate Text w.r.t. angle of selected Points
RT
2 Align Text w.r.t. selected Text
ALT
3 Align selected Text Parallel to selected Line
ALP
4 Arrange Text around a Line
PTX
5 Change Text Case (Initial Capital/Capital/Small)
CCA
6 Change Text Justification
CJ
7 Change angle of Text to conveniently read it
RTC
TEXT VALUE MODIFICATION 8 Inter-change Texts
ITX
9 Copy Reference Text to all selected Texts Create new Text using the content of selected 10 Texts 11 Divide the Text into sub-texts
CPT
12 Insert Sequential Numbers
SQN
ADT DVT
30
Sl. No.
Command Description
Command Shortcut
13 Update text values with Incremented Number
INR
14 Add the specified Value to all selected Texts
ADV
15 Round-off Elevations to 0.005 Precision
RND
16 Concatenate Prefix/Suffix to available Texts
APT
17 Trim space around selected Texts
TMT
LINES 18
Join Texts/Blocks depending on first and nearest selected Objects
19 Mark intersecting Lines of different Layers
JNP OLL
POLYLINES 20 Indicate Polyline Direction
PLD
21 Convert Connected Lines to Polyline
PJ
22 Reverse the Polyline
RPL
23 Measure each Segment of Polyline
MSE
24 Measure Cumulative Distance along a Polyline
MCD
25 Mark chainages along an Alignment
MCH
26 Mark each Node
MEN
27 Measure clockwise Bearing
BCW 31
Sl. No.
Command Description
Command Shortcut
28 Measure Anti-clockwise Bearing
BAW
29 Find total length of selected Lines
ETE
3D POLYLINES 30 31 32 33 34 35
Create 3D Polyline by Selecting Elevation Text (Elevation as Text) one by one Create 3D Polyline by Selecting Elevation Text (Elevation as Text) in a Group Create 3D Polyline by Selecting Elevated Text one by one Create 3D Polyline by Selecting Elevated Text in a Group Remove Elevation from Polyline Vertices (Converts 3D to 2D PolyLine) Convert 2D PolyLine to 3D PolyLine
3DET 3JET 3DT 3JP RZ 2D3D
36 Mark Z value at each Vertex of 3D Polyline
3DZ
37 Interpolate at Vertex Points
IVP
38 Convert 3D Face to 3D Polyline
3DFP
LAYERS 39 Pick the Text for Layer Name
CRL 32
Sl. No.
Command Description
Command Shortcut
40 Move each Text of specified Layer individually
MVT
41 Show Layer by Layer
NL
42 Layer Manager
LMN
BLOCKS 43 Insert Blocks at ends and intersections Insert Block in-between two selected Points in the angle of selection Insert Block at Insertion Point of all selected 45 Texts Change Blocks in the drawing with new Block and 46 scale factor 44
IBEI ISB INB BLR
47
Change Layer of all the Blocks of one Type to specified Layer
CBL
48
Change Layer of all the blocks in the Drawing to the Layer of Block
CBB
49 Export Attribute Information
EXA
50 Import Attribute Information
IMA
SELECT 51 Select entities within a Polygon (Window)
SWP 33
Sl. No.
Command Description
Command Shortcut
52 Select entities within a Polygon (Crossing)
SCP
53 Initiate Jump to Text of same Layer
JTS
54 Jump to Next Text
JTT
55 Select Texts with Non-Numeric Value
ZTV
56 Select Texts with same value in the drawing
SST
INTERPOLATE 57 Interpolate at Midpoint of selected Texts 58 Interpolate value at Given Point 59 Interpolate N values between given Points
ISM ISP ISN
60 Interpolate values at a given distance Interpolate Randomly on the basis of Reference 61 Text 62 Scatter Elevations around CS
ISD
63 Dump Random Numbers
DRN
RNDT SCT
AREA 64 Area of Multiple Objects
AMO
65 Entity Area
AE
66 Triangles Area
RTR 34
Sl. No.
Command Description
Command Shortcut
67 Parcel Area
INA
68 Populate Parcel
LOA
MATHS STATS 69
Find Texts having Numeric value above specified value among the selected Texts
MAX
70
Find Texts having Numeric value below specified value among the selected Texts
MIN
71 Find difference between Overlapping Texts
FDF
72 Find the Total of the selected Texts
TTL
73 Give basic Statistical details about selected Texts
STAT
74 Indicate Gradient of the selected Lines Show a Point at mentioned Gradient at given 75 scale ELEVATE
GRDL
76 Elevate a Text as per the Elevation in Text
CEE
77 Make Elevation of selected Texts to Zero
CEZ
78
Create Elevation Text from Elevated Entities (Points / Texts / Blocks)
LGP
CET
35
Sl. No.
Command Description
Command Shortcut
79 Create 3D Points from Elevation Text
CEP
80 Elevate Selected Objects
UEL
UTILITIES 81
Measure distance between two Points and insert distance Text
MDI
82 Repeat measure command
MCR
83 Put Circle around Text
CIT
84 Put Box around Text
BXT
85 Show entities of the specified Colour
CLR
86 Trim around selected Text
TRIMT
87 Explore Temporary Directory
ETD
88 Delete Temporary Directory Contents
DTC
SURVEY UTILITIES 89 Draw Grid with given Grid Interval 90
Snap Text to Nearest Point on the Grid with the given Grid spacing
DGRID SNP
91 Lat Long of a selected Point
FLL
92 Traverse Correction
TC 36
Sl. No.
Command Description
Command Shortcut
93 Paste Clean Text Sea-level type Elevation Representation of Text 94 and Block SETTING OUT
PCT
95 Put Leader with Easting, Northing Mark Leaders at Insertion of Text, Block and 96 Point Mark Leaders at each Vertex and Angle between 97 Segments
PLL
SEA
LIP MSA
98 Put Easting Northing with attribute Mark EN blocks at Insertion of Text Block and 99 Point 100 Mark EN Block along 3D Polyline
EN
101 Export EN Block Information to File
EEN
102 Vertex Export
VID
IEN MPL
PRINT READY 103 Bulk Plot Settings
BPS
104 Bulk Plot - Fit to Sheet
BPFS
105 Bulk Plot - Given Scale
BPGS 37
Sl. No.
Command Description
Command Shortcut
106 Rotate Text and Block with given Rotation Angle
RTB
107 Scale Text with given factor Scale Block from its insertion Point with given 108 factor IMPORT AND EXPORT
STC
109 Export Selected Objects to CSV File X, Y, Code
EXP1
110 Export Selected Objects to CSV File X, Y, Z Code
EXP2
Export Selected Objects to CSV File (X, Y, Elevation, Code)
EXP3
111
Import Point Data in CSV File as CAD Text X Y, Code Import Point Data in CSV File as CAD Text X, Y, Z 113 Code Import Point Data in CSV File as CAD Text (X, Y, 114 Elevation, Code) 112
SBL
IMP1 IMP2 IMP3
115 Extract the Text within a Polygon Boundary
SUY
116 Quick Command Reference
QCR
117 Online Command Reference
OCR
38
ESurvey Civil Tools Commands Reference
Sl. No.
Command Description
Command Shortcut
LAND DIVISIONS MEASUREMENTS Area Division 1 Divide Polygon by Area
DIVA
2 Divide Polygon by Percentage
DIVP
3 Divide Polygon by Number of Divisions Divide Polygon to Number of Divisions by 4 Specifying Angle Area Functions
DIVN
5 Quickly Mark Area of a Polygon
QAR
6 Represent Area in Multiple Area Units
REAR
7 Derive Area by drawing a Line
DPAR
8 Mark Polygon Center
MCEN
9 Scale Polygon from a Point
SPO
10 Sort Polygons by Area
DIVM
ASE
Triangles 39
Sl. No. Command Description
Command Shortcut
11 Create Triangles within Polyline
FTRI
12 Select Triangles to Derive Area Table
TRAR
Conversion Functions 13 Convert Metric Unit
CMU
14 Convert Area Unit Convert Text Representing Distance in 15 Meter to Feet Convert Text Representing Distance in 16 Feet to Meter Convert Text Representing Square Meter 17 to Square Feet Convert Text Representing Square Meter 18 to Square Yard Residential Layout
CAU
19 Draw Center Line between Segments
CENS
20 Export Center Line information to excel
EXCN
21 Lot Numbering in a Sequence Area Table by Selecting Multiple Lots 22 (With Calculation)
LNU
M2FY F2M SM2SF SM2SY
ATLC
40
Sl. No.
Command Description
Area Table from Selecting Lots (Only Area) Area Table from Multiple Polygon (Only 24 Area) Summary of selected Boundaries in 25 different Layer Plot Measurement with attributes 23
Command Shortcut ATML ATMP PSUM
26 Lot Measurement Unit 27 Area Measurement Unit 28 Output Text Size
LMU LAU LSZ
29 Measure Plot Direction Plot Numbering in a Sequence with 30 attribute Area Summary Table from Attribute 31 Tables PARCEL
PDI
32 Layer Specification for Parcel Hatch Polygon to find boundaries yet to 33 be created
LSAY
PNU ATBL
HPLY
41
Sl. No. 34 35 36 37 38
Command Shortcut
Command Description Select Maximum and Minimum Value from selected Elevation Text Find Missing and Repeating Survey numbers Attach Survey number to Polygon Attach a Village Name to Village boundary Read Information from Survey boundary
SMM MSN AVSB ATV RDV
39 Find Errors in Survey Boundaries
FEVS
40 Export Survey number boundaries
EXSB
41 Export Village Boundary
EXV
42 Export Pocket/Chalk boundary
EXP
43 Export Non-Compensatory Boundaries
EXN
QUICK SECTIONS Settings and Section Object 44 Modify Section Setting
MSS
45 Insert Section Object
IS
46 Change Values of Section Object
DDATTE
42
Sl. No.
Command Description
Attach Line (Layer1 to Layer 5) to Section Object 48 Attach Line to Multiple Section Objects 47
49
Explode unexploded Quick Section Blocks and Join Section Lines
Command Shortcut ATTLI ATML EXREM
Cross Sections 50 Create CS by selecting Alignment
CAQ
51 Create LS by Selecting CS Values Post Back Value of a CS by selecting the 52 CS line 53 Create CS by reading CSV File Import Levels along alignment from CS 54 Data Longitudinal Sections
CLS
55 Create LS by selecting Line and Elevations
CSQ
56 Create LS by selecting 3D Polyline Post Back Value of LS by selecting 57 Polyline Import Levels along Alignment from LS 58 Data
3DSQ
PBCS SCSV IAL
PBLS IALS 43
Sl. No. 59
60 61 62 63
Command Description Insert Blocks at cross sections referring Formation Level Information Labelling Locate a Point depending on Chainage and Level Read Chainage and Level of selected Point Mark Elevations and Chainage along a Section Line Mark Gradients along a Section Line Export Reports
64 Generate both Area and Volume Report 65
Recreate / Export Section Information by selecting Section Object
66 Export Section Levels
Command Shortcut IBFL
LOPO POID LBLL LBLG AVREP EXCQ ESED
ROAD NETWORK 67 Attach Information to Network Line
ATRNL
68 Read Information from Network Line Mark Information for selected Network 69 Line
RRDNL MRRNL 44
Sl. No.
Command Description
Command Shortcut
70 Find a Network Line Export Network Lines to Road Network 71 Module 72 Export Ground
FRNL
73 Export LS Data by selecting Polyline
LSEXP
EXRNL EXEL
TUNNEL SECTIONS 74 Insert Tunnel Block
ITS
75 Change Values of Section Object Attach Line (Layer1 to Layer 5) to Tunnel 76 Block Locate a Point depending on Chainage 77 and Level Read Chainage and Level of selected 78 Point Mark Elevations and Chainage along a 79 Section Line 80 Export Tunnel Section Levels
DDATTE ATTLI LPTS POTS LBTS EXTS
TIPPAN 81 Links to Meter
LTMT
45
Sl. No.
Command Description
Command Shortcut
82 Chain to Meter
CTMT
83 Create Layers for Tippan Application
CTL
84 Draw Perpendicular to Base Line
DPER
85 Measure Distance between Given Points
MED
86 Break Base Line
BPL
Meter 87 Locate a Point at given Distance
LPM
88 Change Segment Length of Base Line
CSM
89 Lengthen Side line of Tippan
LTM
90 Export Ladder
ELM
91 Import Ladder
ILM
Chain Anna 92 Locate a Point at given Distance
LPC
93 Change Segment Length of Base Line 94 Lengthen Side line of Tippan 95 Draw Line Based on Chain / Anna
CSC LTC DTL
96 Export Ladder 97 Import Ladder
ELC ILC 46
Sl. No.
Command Description
Command Shortcut
Tippan 98 Update all Dimensions related to Tippan Display Entries related to Selected Tippan 99 Object 100 Create Boundary
MTS
101 Find Tippan Area
FTA
LTP CRB
Bearing 102 Measure Clockwise Bearing
CWB
103 Measure Anti Clockwise Bearing
ACB
Triangle 104 Create Base Triangle
CRTR
105 Edit Base Triangle
EDTR
106 Create Sub Triangle
CRST
107 Quick Command Reference
QCR
108 Online Command Reference
OCR
47
ESurvey Water Command Reference
Sl. No.
Command Description
Command Shortcut
AYACUT Preparation 1 Layer Specification for Ayacut
LSAY
2 Hatch Polygon to find boundaries yet to be created
HPLY
3
Select Maximum and Minimum Value from selected Elevation Text
SMM
4 Find Missing and Repeating Survey numbers
MSN
5 Attach Survey number to Polygon
AVSB
6 Attach a Village Name to Village boundary
ATV
7 Read Information from Survey boundary
RDV
8 Find Errors in Survey Boundaries
FEVS
9 Set Preferred Area Unit
SAREA
10 Create Area Attributes
CRAI
Sub Chalk 11 Sum up Area by Selecting Attributes
FARA 48
Sl. No.
Command Description
Command Shortcut
12 Derive Target Area by Selecting Polygons
DARP
13 Import Area Attributes
IRTC
14 Bulk Attach Sub Chalk
BASC
15 Merge Survey Boundaries and Create Sub Chalk
MSC
16 Read Information attached to Sub Chalk
RSC
17 Attach Information to Sub Chalk
ATSC
18 Export All Survey numbers which fall under Sub Chalk
EXSC
19 Export Text within Polyline
EXTP
Chalk 20 Merge Survey Chalks and Create Chalk Boundary
MCK
21 Read information attached to Chalk
RCK
22 Create Chalk boundary by selecting Sub Chalk
CRCK
23 Attach Chalk Name to boundary
ATCK
Export 24 Export Survey number boundaries
EXSB
25 Export Village Boundary
EXV
26 Export Chalk boundary
EXP
SEWER NETWORK 49
Sl. No.
Command Description
Command Shortcut
27 Create Manhole Block
CMH
28 Insert Manhole at Pick Point
IMHP
29
Insert Manhole at given Distance / Vertex along a Polyline
IMHC
30
Insert Manhole at Insertion point of Selected Text Block or Point
IMHX
31 Insert Manhole at End Points of Selected Line 32 Increment Manhole Number
IMHL IMHN
33 Create Line Type - Direction
CDLT
34 Bulk Update Field Value
UMFV
35 Update Ground Level to Manholes
UMGL
36 Search Manhole Field Value
SMFV
37 Copy Field Value from Selected Text
CMFV
38 Find Duplicate Manhole
FDMH
39 Insert Blocks depending on Manhole Type
IBMT
40 Update Connected Node Number
UCNN
41 Update Connected Node Number by selecting Line
UCNL
42 Update Connected Node Number along a Polyline
UCNP 50
Sl. No.
Command Description
Command Shortcut
43 Update Invert Level
UPIL
44 Elevate Manholes to 3D Point
3DMH
45 Elevate Manholes to 2D Point
2DMH
46 Export Manhole Information to a CSV File
EMHI
47 Import Manhole Information from a CSV File
IMHI
WATER NETWORK Interpolate 48
Move Elevations on Polyline Depending on Nearest Elevation to Point
MVLN
49
Insert Vertex wherever Elevation text available on network line
IVER
50 Interpolate at Vertex Point
INVP
51 Convert 2D polyline to 3D polyline
TD3D
Centre Line 52 Draw Centre Line for Alignment Lines
CLAL
53 Divide Polyline with more than 30 Degree Bend
DIPY
54 Join Polyline with gap
JNPY
Network Line 51
Sl. No.
Command Description
Command Shortcut
55 Attach Information to Network Line
ATNL
56 Mark Information for selected Network Line
MRNL
57 Export Network Lines to Water Network Module
EXNL
58 Find a Network Line
FNL
Junction 59 Create Junctions in the Drawing
FJN
60 Export Junctions from Drawing
EJN
61 Read Junction Information 62 Increment Junction Numbers 63 Export Text/Block Positions and Chainages
RJN IJN EXBT
64 Export Ground 65 Export LS Data by selecting Polyline 66 Create 3D Polyline by Selecting Plan Profile
EXEL LSEXP 3PY
67 Quick Command Reference
QCR
68 Online Command Reference
OCR
52
ESurvey Trans Command Reference Sl. No. 1 2 3 4 5
Command Description
Command Shortcut
Open OD Matrix Template Open OD Matrix Sample Create OD Matrix Lines Quick Command Reference Online Command Reference
ODT ODS ODM QCR OCR
53