Designer: Irina Kostina: Advanced [PDF]

Zitiervorschau

Designer: Irina Kostina

Skill level: Advanced Finished measurements: Height approx 11in(28cm) Head diameter approx 8in(19.5cm) Waist approx 7in(18cm) Leg length approx 6in(14.5cm) Arm length approx 4in(10cm)

Materials and notions: Original yarn: Schachenmayr Original Сatania 100% mercerized cotton 1.75oz(50g) each approx 137yds(125m). 1 skein in #0263 (A), 1 skein in #0225 (B), 2 skeins in #0246 (C), 2 skeins in #0398 (D), 2 skeins in #0222 (E), 2 skeins in #0404 (F), Scrap yarn in #0408 for freckles (G), 1 skein in #0105 (H).

Suggested substitute yarn: Sheepjes Catona, Lang Yarns Golf, ScheweBaumwolle-classic Color, Patons Grace, Rowan Cotton Glace, Cascade Yarns Ultra Pima Fine, Katia Brisa, Katia Capri, Lion Brand Yarns Bonbons Cotton. Steel hook 2mm or size to obtain gauge, Removable stitch markers, Safety eyes 6mm, Stuffing, Button 6mm (1 pc), Needle and dental floss for sewing, Soft plastic, Blush, Pliers, Cotter pin (fastener) 30mm long (2 pcs), Disk 18mm in diameter (4 pcs).

Gauge: 31 sc x 33 rows = 4in(10cm). Gauge is not critical for this project. You can use any yarn to make this toy. For example, if you use a bigger hook and a suitable yarn, the toy will be bigger while maintaining the same proportions. Pattern notes: Always mark BOR to avoid shifting of the pattern. All pieces are worked in a continuous spiral; do not join with sl st unless otherwise stated. Abbreviations (US terminology): approx: approximately BLO: back loop only BOR: beginning of round ch: chain cont: continue dc: double crochet dc2tog: decrease dec: decrease(ing) FLO: front loop only foll: follow(s) hdc: half double crochet inc: increase(ing) pat: pattern rep: repeat rnd(s): round(s) sc: single crochet sc2tog: decrease sk: skip sp: space st(s): stitches

Instructions: Leg (Make 2) Note: Do not stuff the legs too much, they shouldn’t be too thick. But the legs should be firm enough to let the doll stand by itself. With yarn A (#0263), start to work in rnds (work on both sides of the chain). Rnd 1: ch7. Rnd 2 (INC): 2sc in next st, sc in next 4 sts, 3sc in next st, sc in next 5 sts (14 sts). Rnd 3 (INC): 2sc in next 2 sts, sc in next 4 sts, 2sc in next 3 sts, sc in next 4 sts, 2sc in next st (20 sts). Rnd 4(INC): 2sc in next 4 sts, sc in next 4 sts, 2 sc in next 6 sts, sc in next 4 sts, 2sc in next 2 sts (32 sts). Rnd 5: sc in every st (32 sts). Rnd 6 (INC): [sc in next st, 2sc in next st] 4 times, sc in next 4 sts, [sc in next st, 2sc in next st] 6 times, sc in next 4 sts, [sc in next st, 2sc in next st] 2 times (44 sts). Rnd 7: sc in every st (44 sts). Make a sole using a soft plastic, mark it (fig.1), then make it 1mm smaller (fig.2) and cut it (fig.3).

1) 2) 3) Rnd 8: work BLO, sc in every st (44 sts). See fig.4. Rnds 9-11: sc in every st (44 sts). Piece should look like as it's shown on fig.5. Place plastic sole inside the piece (see fig.6).

4) 5) 6) Rnd 12 (DEC): sc in next 17 sts, hdc in next st, [dc in next st, dc2tog] 6 times, hdc in next st, sc in next 7 sts (38 sts) Rnd 13 (DEC): sc in next 15 sts, [sc2tog] 8 times, sc in next 7 sts (30 sts). Rnd 14 (DEC): sc in next st, [sc2tog] 3 times, sc in next 6 sts, [sc2tog] 6 times, sc in next 5 sts (21 sts). Rnd 15 (DEC): sc in next 10 sts, [sc2tog] 3 times, sc in next 5 sts (18 sts). Stuff the foot firmly. Rnds 16-24: sc in every st (18 sts). Fasten off and change to yarn B (#0225). Rnd 25: work BLO, sc in every st (18 sts). (fig.7).

7) Cont to stuff the leg gradually. Rnds 26-50: sc in every st (18 sts). Insert cotter pins between rnd 49 and rnd 50 (fig.9-10), placing a disk on the cotter pin beforehand (fig.8). Rnd 51 (DEC): [sc2tog] 9 times (9 sts). Rnd 52 (DEC): dec all sts. Fasten off. Weave in all ends.

8)

9)

10)

Ruche: Join yarn F (#0105) at rnd 25 level (fig.11), insert the hook from the bottom up and work around the leg as foll: [sc in next st, ch3] 18 times (fig.12). Fasten off.

11) Rep for the second leg.

12)

Body: With yarn B (#0225), make a magic ring. Rnd 1: 6 sc into the ring (6 sts). Rnd 2 (INC): 2sc in every st (12 sts). Rnd 3 (INC): [sc in next st, 2sc in next st] 6 times (18 sts). Rnd 4 (INC): [sc in next 2 sts, 2sc in next st] 6 times (24 sts).

Rnd 5 (INC): [sc in next 3 sts, 2sc in next st] 6 times (30 sts). Rnd 6 (INC): [sc in next 4 sts, 2sc in next st] 6 times (36 sts). Rnd 7 (INC): [sc in next 5 sts, 2sc in next st] 6 times (42 sts). Rnd 8 (INC): [sc in next 6 sts, 2sc in next st] 6 times (48 sts). Rnds 9-18: sc in every st (48 sts). Fasten off. Join legs: Insert a cotter pin at level of rnd 7 to fix legs evenly (fig.13-14), insert disk from the inside of the body to fix a cotter pin. Bend the cotter pin using pliers (fig.16-18). It should look like on fig.19.

13)

17)

14)

15)

18)

Change to yarn C (#0246). Rnd 19: work BLO, sc in every st (48 sts) (fig.20). Rnds 20-21: sc in every st (48 sts). Rnd 22: work BLO, sc in every st (48 sts) (fig.21). Rnds 23-29: sc in every st (48 sts). Rnd 30 (DEC): [sc in next 6 sts, sc2tog] 6 times (42 sts). Rnd 31: work BLO, sc in every st (42 sts) (fig.22). Rnd 32 (DEC): [sc in next 5 sts, sc2tog] 6 times (36 sts). Rnd 33: sc in every st (36 sts). Rnd 34 (DEC): [sc in next 4 sts, sc2tog] 6 times (30 sts). Rnd 35: sc in every st (30 sts). Rnd 36 (DEC): [sc in next 3 sts, sc2tog] 6 times (24 sts). Change to yarn A (#0263). Rnd 37: work BLO, sc in every st (24 sts) (fig.23). Stuff the body. Rnd 38 (DEC): [sc in next 2 sts, sc2tog] 6 times (18 sts). Rnd 39: sc in every st (18 sts). Rnd 40 (DEC): [sc in next st, sc2tog] 6 times (12 sts). Rnds 41-48: sc in every st (12 sts).

16)

19)

Stuff the neck. Rnd 49 (DEC): [sc2tog] 6 times. Stuff the body completely, paying attention to the neck – do not stretch it. Stuff the neck firmly to avoid head shaking. Fasten off. Weave in all ends (fig.24).

20)

23)

21)

22)

24)

Skirt (#1): Join yarn D (#0398) at rnd 19 level of the body (fig.25-26), and work as foll, mark the 1st st of every rnd: Rnd 1 (INC): 2dc in every st around the body (96 sts) (fig.27). Join with sl st to work in rnds. Rnds 2-6: sc in every st (96 sts). Rnd 7 (INC): [sc in next 5 sts, 2sc in next st] 16 times (112 sts). Rnds 8-12: sc in every st (112 sts). Rnd 13 (INC): [sc in next 6 sts, 2sc in next st] 16 times (128 sts). Rnds 14-16: sc in every st (128 sts). Rnd 17: work BLO, sc in every st (128 sts) (fig.27). Rnd 18 (INC): [sc in next 7 sts, 2sc in next st] 16 times (144 sts). Rnd 19: work BLO, sc in every st (144 sts) (fig.28). Rnds 20-21: sc in every st (144 sts). Do not fasten off.

25)

26)

27)

28) 1st ruche: Please see the chart(fig. A) Rnd 22: [ch5, sk2, sl st in next st] 46 times, ch2, dc in the top of dc of previous row (fig.31-32) (48 arches) (fig.29). Rnd 23: [7dc in the first arch of the previous row, sl st in next arch, {ch5, sl st in next arch} 2 times] 12 times, sl st in the top of dc of previous row (fig.30).

29)

31)

30)

32)

Rnd 24: [{ch1, dc in next st, ch1, sl st in next st} 7 times, sl st in next arch, ch5, sl st in next arch] 12 times (12 fans) (fig.33).

Rnd 25: [{ch3, sl st in next dc sp} in next 8 dc sp, 5sc in next arch] 12 times (12 fans) (fig.34). Fasten off.

33)

34)

A)

2nd ruche: Please see the chart(fig. A) join yarn E (#0222) at skirt rnd 19 level (fig.35). Rnd 1: [ch5, sk2, sl st in next st] 46 times, ch2, dc in the top of dc of previous row (48 arches) (fig.36). Rnd 2: ch2, 6dc in next arch, sl st in next arch, [ch5, sl st in next arch] 2 times, [7dc in next arch, sl st in next arch, {ch5, sl st in next arch} 2 times] 11 times, sl st in next arch (fig.37).

35)

37)

36)

Rnd 3: [{ch1, dc in next st, ch1, sl st in next st} in next 7 sts, ch5, sl st in next arch] 12 times, sl st in next arch (12 fans) (fig.38). Rnd 4: [{ch3, sl st in next dc sp} in next 8 dc sp, 5sc in next arch] 12 times (12 fans) (fig.39). finish off and weave the ends.

38)

39)

Mini ruche: Join yarn F (#0105) at skirt rnd 17 level (fig.40) and work around as foll: [sc in next st, ch1] 144 times. Fasten off (fig.41).

40)

41)

Waist ruche: Work according to the chart if desired (fig.42). Join yarn E (#0222) at body rnd 21 level (fig.43). Rnd 1: ch5, sk1, [dc in next st, ch3, sk1] 23 times, sl st in next arch (24 arches) (fig.44). Rnd 2: ch2, 6dc in the same arch, sl st in next arch, ch3, sl st in next arch, [7dc in next arch, sl st in next arch, ch3, sl st in next arch] 7 times (8 fans) (fig.45). Rnd 3: ch3, {dc in next st, ch1, sl st in next st} 6 times, sc in next arch, [{dc in next st, ch1, sl st in next st} 7 times, sc in next arch] 7 times, sl st in next arch (8 fans) (fig.46). Rnd 4: [{ch3, sl st in next arch} 6 times, sc in sc of previous row] 8 times, sl st in next arch (fig.47). Fasten off.

42)

43)

46)

44)

45)

47)

Jacket: Work according to the chart if desired (fig. B). Join yarn C (#0246) at body rnd 31 level (fig.48). Work FLO. Rnd 1: ch2, 2dc in next st, [dc in next st, 2dc in next st] 20 times, sl st in next arch (63 sts) (fig.49). Rnd 2: ch3, dc in the same st, sk2, [dc in next st, ch1, dc in the same st (V st made), sk2] 20 times, sl st into the second st of beg ch3 (fig.50). Rnds 3-4: sl st into ch sp, ch3, dc in the same ch sp, [2dc in next st, ch3, 2dc in next ch sp (double V st made) {dc in next ch sp, ch1, dc in next 2 ch sp (V st made)}] 6 times, sl st into the second st of beg ch3 (fig.51, 52). Rnd 5: ch3, dc in the same arch, dc in next arch, ch1, dc in the same arch, 7dc in next arch, [{dc in next arch, ch1, dc in the same arch } 2 times, 7dc in next arch] 6 times, sl st and finish off (fig.53).

B)

48)

51)

49)

52)

50)

53)

Collar: Join yarn F (#0105) at body rnd 37 level (fig.54). Work FLO as foll: Rnd 1: ch2, dc in the same st, ch2, 2dc in the same st, sk1, sl st in next st, dc in next st, [{2dc in next st, ch2, 2dc in the same st, sk1, dc in next st] 5 times, sl st in ch2 and sl st to arch (fig.55). Rnd 2: ch2, 2dc in the same arch, ch2, 3dc in the same arch, dc in next 3 sts, [3dc in next arch, ch2, 3dc in the same arch, dc in next 3 sts] 5 times. Sl st in the first ch2 and finish off (fig.56).

54)

55)

56)

Arm (Make 2): Note: do not stuff the arm firmly, they shouldn’t be thick staying soft. With yarn A (#0263), make a magic ring. Rnd 1: 6 sc into the ring (6 sts). Rnd 2 (INC): 2sc in every st (12 sts). Rnds 3-7: sc in every st (12 sts). Rnd 8 (DEC): [sc in next 4 sts, sc2tog] 2 times (10 sts). Rnds 9-33: sc in every st (10 sts). Rnd 34 (DEC): [sc2tog] 5 times. Fasten off and weave in ends. Rep for the second arm. Sewing arms: Use dental floss and a needle (fig.57). Insert the needle to one arm (fig.58), then pull it through the body and the second arm (fig.59). Then bring the needle out from the opposite side. Rep 2-3 more times. Make a knot, cut the floss and weave in the ends (fig.60).

57)

59)

58)

60)

Head: With yarn A (#0263), make a magic ring. Rnd 1: 6sc into the ring (6 sts). Rnd 2 (INC): 2sc in every st (12 sts). Rnd 3 (INC): [sc in next st, 2sc in next st] 6 times (18 sts). Rnd 4 (INC): [sc in next 2 sts, 2sc in next st] 6 times (24 sts). Rnd 5 (INC): [sc in next 3 sts, 2sc in next st] 6 times (30 sts). Rnd 6 (INC): [sc in next 4 sts, 2sc in next st] 6 times (36 sts). Rnd 7 (INC): [sc in next 5 sts, 2sc in next st] 6 times (42 sts). Rnd 8 (INC): [sc in next 6 sts, 2sc in next st] 6 times (48 sts) (fig.61). Rnds 9-14: sc in every st (48 sts). Rnd 15: sc in next 18 sts, ch1, sk1, sc in next 10 sts, ch1, sk1, sc in next 18 sts (48 sts). Rnds 16-21: sc in every st (48 sts) (fig.62).

61) 62) Insert safety eyes into ch1 skipped sts (fig.63). Rnd 22 (DEC): [sc in next 6 sts, sc2tog] 6 times (42 sts). Rnd 23 (DEC): [sc in next 5 sts, sc2tog] 6 times (36 sts). Rnd 24 (DEC): [sc in next 4 sts, sc2tog] 6 times (30 sts). Stuff the head firmly, shaping a rectangle. The face should not be shaped as a round. Rnd 25 (DEC): [sc in next 3 sts, sc2tog] 6 times (24 sts). Rnd 26 (DEC): [sc in next 2 sts, sc2tog] 6 times (18 sts). Rnd 27 (DEC): [sc in next st, sc2tog] 6 times (12 sts). Fasten off leaving a long tail for sewing.

63) 64) Face: Embroider the nose using a single strand of yarn A (#0263) with 3 sts in between, counting 1 rnd down from the eyes (fig.65-66).

65) 66) Apply blush (fig.67). Randomly embroider freckles using yarn G (#0408) (fig.68-69).

67)

68)

69)

Sew the head to the body (fig.70-71). It’s very important to stuff the neck firmly, so it can hold the head! Push the head a bit to avoid a long neck.

70)

71)

Hair: Note: Work all rnds BLO! Wig: With yarn F (#0404), make a magic ring. Rnd 1: 6sc into the ring (6 sts). Rnd 2 (INC): 2sc in every st (12 sts). Rnd 3 (INC): [sc in next st, 2sc in next st] 6 times (18 sts). Rnd 4 (INC): [sc in next 2 sts, 2sc in next st] 6 times (24 sts). Rnd 5 (INC): [sc in next 3 sts, 2sc in next st] 6 times (30 sts). Rnd 6 (INC): [sc in next 4 sts, 2sc in next st] 6 times (36 sts). Rnd 7 (INC): [sc in next 5 sts, 2sc in next st] 6 times (42 sts). Rnd 8 (INC): [sc in next 6 sts, 2sc in next st] 6 times (48 sts) (fig.72).

Do not fasten off.

72)

Note: work bangs and curls loosely, do not tighten th e loops to avoid them curling too much. You can change to a larger crochet hook. I recommend to work the stitches loosely. The hair will curl anyways but not too much.

Bangs: Ch15, then sc back to the wig, join with a sl st to the wig. Ch15 from the next st of the base, then sc back. Rep 10 times in total (10 bangs). Curls: Length of the curls is adjustable. Ch66, sc in the 2nd st from the hook, then sc in every st (65 sts) back to the wig, join to the wig (fig.73-74). Cont for other curls with 1 st in between. Work curls around the wig, skipping rnds indicated with red lines on fig.75. Work curls close to each other as it’s shown on fig.75 with 1 rnd in between. Look at fig.75 how curls should be close to each other, and finish the top as it’s shown on fig.77. The total number of curls is approx 57-60.

73)

76)

74)

77)

75)

Sewing the wig: Attach the wig to the head and pin it (fig.78), sew hair along the edge and between the curls (fig.78-79). it should look like on fig.80.

78)

79)

Hat: With yarn E (#0222) make a magic ring. Rnd 1: 6sc into the ring (6 sts). Rnd 2 (INC): 2sc in every st (12 sts). Rnd 3 (INC): [sc in next st, 2sc in next st] 6 times (18 sts). Rnd 4 (INC): [sc in next 2 sts, 2sc in next st] 6 times (24 sts). Rnd 5 (INC): [sc in next 3 sts, 2sc in next st] 6 times (30 sts). Rnd 6 (INC): [sc in next 4 sts, 2sc in next st] 6 times (36 sts). Rnd 7 (INC): [sc in next 5 sts, 2sc in next st] 6 times (42 sts). Rnd 8 (INC): [sc in next 6 sts, 2sc in next st] 6 times (48 sts). Rnd 9 (INC): [sc in next 7 sts, 2sc in next st] 6 times (54 sts). Rnd 10 (INC): [sc in next 8 sts, 2sc in next st] 6 times (60 sts). Rnd 11 (INC): [sc in next 9 sts, 2sc in next st] 6 times (66 sts). Rnd 12 (INC): [sc in next 10 sts, 2sc in next st] 6 times (72 sts). Rnd 13: sc in every st (72 sts). Rnd 14 (INC): [sc in next 11 sts, 2sc in next st] 6 times (78 sts). Rnd 15: sc in every st (78 sts). Rnd 16 (INC): [sc in next 12 sts, 2sc in next st] 6 times (84 sts). Rnd 17: sc in every st (84 sts). Rnd 18 (INC): [sc in next 13 sts, 2sc in next st] 6 times (90 sts). Rnd 19: sc in every st (90 sts). Rnd 20 (INC): [sc in next 14 sts, 2sc in next st] 6 times (96 sts). Rnd 21: sc in every st (96 sts). Rnd 22 (INC): [sc in next 15 sts, 2sc in next st] 6 times (102 sts). Rnd 23: sc in every st (102 sts). Rnd 24 (INC): [sc in next 16 sts, 2sc in next st] 6 times (108 sts). Rnds 25-29: sc in every st (108 sts) (fig.81). Fasten off.

80)

81) Ear flap (Make 2): With RS facing, join yarn E (#0222) to the base of the hat with a sl st. Work back and forth in rows as foll: Row 1 (RS): ch1, sc in next 14 sts, turn (14 sts). Row 2 (WS): ch1, sc in every st, turn (14 sts). Row 3 (DEC): ch1, sc in next st, sc2tog, sc in next 8 sts, sc2tog, sc in next st, turn (12 sts). Row 4: ch1, sc in every st, turn (12 sts). Row 5 (DEC): ch1, sc in next st, sc2tog, sc in next 6 sts, sc2tog, sc in next st, turn (10 sts). Row 6: ch1, sc in every st, turn (10 sts). Row 7 (DEC): ch1, sc in next st, sc2tog, sc in next 4 sts, sc2tog, sc in next st, turn (8 sts) Row 8: ch1, sc in every st, turn (8 sts). Row 9 (DEC): ch1, sc in next st, sc2tog, sc in next 2 sts, sc2tog, sc in next st, turn (6 sts) Row 10: ch1, sc in every st, turn (6 sts). Row 11 (DEC): ch1, sc in next st, [sc2tog] 2 times, sc in next st, turn (4 sts) Row 12: ch1, sc in every st, turn (4 sts). Fasten off (fig.82) Rep for the 2nd ear flap on the opposite side of the hat. Then using yarn D (#0398) sc along the hat edge (fig. 83).

82) 83) Using yarn C (#0246) cut approx 20 strands of yarn each approx 14in(36cm) long per each braid and loop them at the bottom edge of ear flaps. Make a braid (fig. 84-86).

84)

85)

86)

Rose flower (make 2): Note: rose has 3 types of petals. Petal #1 (make 3): Note: mark first st using removable stitch marker. With yarn D (#0398) make a magic ring. Rnd 1: 6sc into the ring (6 sts). Rnd 2 (INC): 2sc in every st (12 sts). Rnd 3 (INC): [sc in next st, 2sc in next st] 6 times (18 sts). Rnd 4 (INC): [sc in next 2 sts, 2sc in next st] 6 times (24 sts). Rnd 5: sc in every sy (24 sts) (fig.87). Fasten off. Rep 2 more times.

87) Petal #2 (make 4): Note: mark first st using removable stitch marker. With yarn E (#0222) make a magic ring. Rnd 1: 6sc into the ring (6 sts). Rnd 2 (INC): 2sc in every st (12 sts). Rnd 3 (INC): [sc in next st, 2sc in next st] 6 times (18 sts). Rnd 4 (INC): [sc in next 2 sts, 2sc in next st] 6 times (24 sts). Rnd 5 (INC): [sc in next 3 sts, 2sc in next st] 6 times (30 sts). Rnd 6 (INC): sc in next 6 sts, hdc in next 3 sts, [2dc in next st] 4 times, hdc in next st, sc in next 2 sts, hdc in next st, [2dc in next st] 4 times, hdc in next 3 sts, sc in next 6 sts. Fasten off. Rep 3 more times (fig.88).

88)

Petal #3 (make 6): Note: mark first st using removable stitch marker. With yarn C (#0246) make a magic ring. Rnd 1: 6sc into the ring (6 sts). Rnd 2 (INC): 2sc in every st (12 sts). Rnd 3 (INC): [sc in next st, 2sc in next st] 6 times (18 sts). Rnd 4 (INC): [sc in next 2 sts, 2sc in next st] 6 times (24 sts). Rnd 5 (INC): [sc in next 3 sts, 2sc in next st] 6 times (30 sts). Rnd 6 (INC): [sc in next 4 sts, 2sc in next st] 6 times (36 sts). Rnd 7 (INC): sc in next 7 sts, hdc in next 3 sts, [2dc in next st] 6 times, hdc in next st, sc in next 2 sts, hdc in next st, [2dc in next st] 4 times, hdc in next 3 sts, sc in next 7 sts. Fasten off. Rep 5 more times (fig.89).

89) Rep for the second rose. Rose assembly Note: using a needle, sew the petals together using desired stitch (I use backstitch). Sew petals together at the bottom adding new petals one by one. Fold in half petal #1 (fig.90). Then fold in half 2 remaining petals #1 and attach at both sides (fig.91). Sew them at the bottom.

90)

91)

Then sew petals #2. With WS facing, attach to the sewn petals #1 (fig.92). And sew petals #2 one by one at the bottom (fig.93-94). It should look like on fig.95.9

92)

93)

94)

95)

Then sew petals #3. With WS facing, attach to the flower, and sew petals #3 one by one at the bottom (fig.96-97). It should look like on fig.98. Rep for the second rose.

96)

97)

98)

Sew one rose to the hat, placing at the right side or as desired (fig.98-99).

98) Sew the second rose to the jacket (fig.100).

99)

100) Shoe (Make 2): With yarn E (#0222), ch7. Then work from both sides of the chain. Rnd 1 (INC): 2sc in next st, sc in next 4 sts, 3sc in next st, sc in next 4 sts, sc in next st (14 sts). Rnd 2 (INC): [2sc in next st] 2 times, sc in next 4 sts, [2sc in next st] 3 times, sc in next 4 sts, 2sc in next st (20 sts). Rnd 3 (INC): [2sc in next st] 4 times, sc in next 4 sts, [2sc in next st] 6 times, sc in next 4 sts, [2sc in next st] 2 times (32 sts). Rnd 4: sc in every st (32 sts). Rnd 5 (INC): [sc in next st, 2sc in next st] 4 times, sc in next 4 sts, [sc in next st, 2sc in next st] 6 times, sc in next 4 sts, [sc in next st, 2sc in next st] 2 times (44 sts). Rnd 6: sc in every st (44 sts). Rnd 7 (INC): [sc in next 2 st, 2sc in next st] 4 times, sc in next 4 sts, [sc in next 2 st, 2sc in next st] 6 times, sc in next 4 sts, [sc in next 2 st, 2sc in next st] 2 times (56 sts). Rnd 8: sc in every st (44 sts) (fig.101). Rnd 9: work BLO (fig.102) sc in next 2 sts, sc2tog, sc in next 4 sts, sc2tog, sc in next 17 sts, sc2tog, sc in next 8 sts, sc2tog, sc in next 17 sts (52 sts). Fasten off and change to yarn D (#0398). Rnd 10: sc in every st (52 sts). Fasten off and change to yarn E (#0222). Rnd 11: sc in every st (52 sts). Fasten off and change to yarn D (#0398). Rnd 12: sc in every st (52 sts). Fasten off and change to yarn E (#0222). Rnd 13: sc in every st (52 sts). Fasten off (fig.103).

101)

102)

103)

Toe: Fold the piece in half as it’s shown on fig.104 and mark 2 central sts, then count 14 sts to the left and to the right and mark these sts too (fig.105). 28 sts are between markers. With RS, join yarn E (#0222) at the left stitch marker and work BLO moving towards the right marker (fig.106).

104) 105) 106) Then work back and forth in rows as foll: Row 1 (DEC): working BLO, ch3, dc in next st, [dc in next st, dc2tog] 8 times, dc in next 2 sts, turn (20 sts). Row 2 (DEC): ch1, [sc in next st, sc2tog] 6 times, sc in next st, turn (14 sts). Row 3 (DEC): ch1, sc in next 3 sts, [sc2tog] 3 times, sc in next 4 sts, turn (11 sts). Row 4 (DEC): ch1, [sc in next st, sc2tog] 3 times, sc in next st, turn (8 sts). Row 5 (DEC): ch1, sc6tog, sc in next st (3 sts). Fasten off (fig.107). Tongue Join yarn E (#0222) as it’s shown on fig.108. Row 1: sc in next 15 sts, turn (15 sts). Rows 2-7: ch2, dc in next 15 sts (15 sts). Fasten off and weave in the end (fig.109).

107)

108)

109)

Back part Note: only worked stitches included in the stitch count in the end of each row. Join yarn E (#0222) as it’s shown on fig.110, counting 3 sts from the toe edge. Work FLO first 3 sts, then work through both loops to last 3 sts, and work 3 sts FLO. Row 1: sc in next 30 sts (30 sts), turn. Row 2: ch1, sc in every st, turn (30 sts). Row 3: ch2, sk1, sc in next 26 sts, sk1, sc in next st, turn (28 sts). Row 4: ch1, sc in every st, turn (28 sts). Row 5: ch2, sk1, sc in next 24 sts, sk1, sc in next st, turn (26 sts). Row 6: ch1, sc in every st, turn (26 sts). Row 7: ch2, sk1, sc in next 22 sts, sk1, sc in next st, turn (24 sts). Row 8: ch1, sc in every st, turn (24 sts). Fasten off.

Join yarn D (#0398) as it’s shown on fig.111 and work along the edge and work 3 turning chains in the corners: sc in next 8 sts, sc in next 3 sts, sc in next 22 sts, sc in next 3 sts, sc in next 8 sts (44 sts). Fasten off. Rep for the second shoe.

110)

111)

112)

Lace (make 2) With yarn D (#0398), ch100, fasten off. Insert laces, using a hook (see fig.113).

113) All the images, illustrations and the pattern itself is copyrighted. For personal, non-commercial use only. The finished item can be sold, please credit me as the designer. It's strictly prohibited to edit, publish, copy this pattern in any way.