37 2 380KB
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE (02) 10-8-08
INTERNATIONAL ASSOCIATION OF DRILLING CONTRACTORS
STANDARD FORMAT EQUIPMENT LIST DRILL SHIP UNITS TABLE OF CONTENTS Arktikmorneftegasrazvedka – Drillship DP Deep Venture SECTION A A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11
UNIT SPECIFICATIONS Main Dimensions/Technical Description Storage Capacities Propulsion / Thrusters Operational Capabilities Variable Loading Environmental Limits Mooring System Marine Loading Hoses Cranes, Hoists, and Materials Handling Helicopter Landing Deck Auxiliary Equipment
SECTION B - GENERAL RIG SPECIFICATIONS B1 Derrick and Substructure B2 Drawworks and Associated Equipment B3 Derrick Hoisting Equipment B4 Rotating System SECTION C POWER SUPPLY SYSTEMS C1 C2
Rig Power Plant Emergency Generator
SECTION D DRILLSTRING EQUIPMENT D1 D2 D3
Revision 01
Tubulars Handling Tools Fishing Equipment
Page 1 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE (02) 10-8-08 SECTION E1 E2 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 E13 E14 E15 E16
E - WELL CONTROL/SUBSEA EQUIPMENT Lower Riser Diverter Assembly Primary BOP Stack Primary Lower Marine Riser Package Secondary BOP Stack Secondary Lower Marine Riser Package Primary Marine Riser System Secondary Marine Riser System Diverter BOP Subsea Support System BOP Control System Subsea Control System Acoustic Emergency BOP Control System Subsea Auxiliary Equipment Choke Manifold BOP Testing Equipment Wellhead Running / Retrieving / Testing Tools
SECTION F1 F2 F3
F - MUD SYSTEM/BULK SYSTEM High Pressure Mud System Low Pressure Mud System Bulk System
SECTION G - CASING / CEMENTING EQUIPMENT G1 Casing Equipment G2 Cement Equipment SECTION H1 H2 H3 H4 H5 H6 H7 H8 H9 H10
H - INSTRUMENTATION / COMMUNICATION Drilling Instrumentation at Driller’s Position Drilling Parameter Recorder Instrumentation at Choke Manifold Standpipe Pressure Gauge Deviation Equipment Calibrated Pressure Gauges Rig Communication System Environmental Instrumentation Additional MODU Specific Instrumentation Radio Equipment
SECTION l1 l2 l3 l4 l5 I6
I - PRODUCTION TEST EQUIPMENT Burner Burner Boom Lines Required on Burner Boom Sprinkler System Fixed Lines for Well Testing Auxiliary Power Availability
SECTION SECTION K1 K2
J - WORKOVER TOOLS K - ACCOMMODATION Offices Living Quarters
SECTION L1 L2 L3 L4
L - SAFETY EQUIPMENT General Safety Equipment Gas / Fire / Smoke Detection Fire Fighting Equipment Breathing Apparatus
Revision 01
Page 2 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE (02) 10-8-08 L5 L6 L7 L8 L9 SECTION M1 M2 M3
Revision 01
Emergency First Aid Equipment Helideck Rescue Equipment Rig Safety Store Emergency Warning Alarms Survival Equipment M - POLLUTION PREVENTION EQUIPMENT Sewage Treatment Garbage Compaction Garbage Disposal / Grinder
Page 3 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE A. UNIT SPECIFICATIONS Rig type: Unit/Design/Shape: Unit flag: Unit classification: IMO Certification: Year of Construction: Construction Yard:
yes/no
Type of Positioning system (anchor/dp/combined): A.1
MAIN DIMENSIONS / TECHNICAL DESCRIPTION
Weight (light ship): mt Displacement at loadline: mt Draft at loadline (deepest): m Overall length of unit (including anchor racks): m Overall width of unit (including anchor racks): m Main deck elevation above baseline: m Moon pool dimensions: mxm Maximum Substructure/Rotary Load: tons Fuel Consumption (average - drilling): m 3/day Accommodation for max. no. of personnel: A.2
High specification drill ship Drill ship / Gusto Engineering / Pelican Class D.P. drill ship Barbados DNV *1A1 MODU, DYNPOS-AUTR, Ice 1A* Yes 1982 Rauma Repola Oy, Pori, Finland (upgraded 1997/98 & 2006/07) Dynamic positioning – Kongsberg SDP 531
10392.97mt 18231 mt 7.30 m 149.4m 28.2 m 12.53 mtrs Fwd-Aft= 7.20m & port-stbd= 7.90m 645 tons / 454 tons 27 m 3/day 116 people
STORAGE CAPACITIES
Fuel: Diesel Oil Tank m3 Drilling water: Potable water: Active liquid mud Mud processing tank: Reserve liquid mud: Bulk bentonite/barite: Bulk mud and cement: Sacks storage: Pipe racks area: Riser racks area: Load bearing capacity: Miscellaneous storage area: Brine storage: Heavy brine accepted (e.g. Bromide): Base oil storage: Oil base mud storage: Ballast system (or preload):
A.3
PROPULSION / THRUSTERS
A.3.1
In-line Propulsion yes/no
Revision 01
m3 m3 m3 bbl bbl bbl cu.ft cu.ft tons m2 m2 mt m2 bbl yes/no bbl bbl bbl
2214 m3 2214 m3 1700 m3 669 m3 1622 bbl ----2113 bbl 4873 ft3 / 4873 ft3 9747 ft3 350 tons 660 m2 320 m2 1100 mt 100 m2 1500 bbl Yes 750 bbl Is brine storage 4050 m3
Yes Page 4 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Shafts: Motors per shaft: no. Motors make/type: Total HP per shaft: hp Propeller type (fixed/variable blade): Nozzled: A.3.2
no. 2 2 Liaaen (Now Rolls Royce Marine) 3700 hp each Variable yes/no No
Thrusters
Quantity: Fixed/azimuthing: Motors per thruster: Make/type motors: Total power per thruster: Propeller type (fixed/variable blade): Nozzled: A.3.3
no. no.
yes/no
Dynamic Positioning
Make/model: Full DP or Mooring Assist: Position Reference: A.4
Kongsberg SDP 531 Full DP 2 x Hipap 500 2 x DGPS DPS 200
OPERATIONAL CAPABILITIES
Maximum designed water depth capability: Outfitted max. water depth capability: Drilling depth capability (rated): Transit speed towed (historical avg.): Transit speed self propelled (historical avg.): A.5
A.6 ENVIRONMENTAL LIMITS Drilling Air gap (below lower deck): Max. wave height: Max. wave period: Max. wind velocity (1 min mean): Max. current velocity: Max. heave (double amplitude): Max. pitch (double amplitude): Max. roll (double amplitude):
A.7.1
m m m kts kts
1,350 m (Limited by space on the deck for riser) 1,350 6,000 N/A 9 kts ( max 10.0 kts)
VARIABLE LOADING (VL)
Transit VL: Drilling VL: Survival VL:
A.7
5 Fixed 1 Liaaen (Now Rolls Royce Marine) 1,380 kw Variable Tunnel
tons tons lt
m m sec kts kts m degrees degrees
7500 tons 7500 tons N/A
N/A 5m 8.5 sec 47 kts 2 kts 3m 5 deg 5 deg
MOORING SYSTEM Anchor Winches
Revision 01
Page 5 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Quantity: Make/model: Type (electric/hydraulic/diesel): Motors per winch: Motor make/type: A.7.3
no. no.
1 AV-1X Electric 1 N/A
Anchors
A.7.3.1 Anchors - Primary Quantity: Type: Weight: A.7.4
no. lt
Anchor Lines
Quantity: (installed/spare): Make/type: Specification: Diameter: Weight per unit length: Useful length (nominal): Classification: Breaking strength: A.7.6
no. in lbs/ft ft ton
Pelican Hook located on Poop Deck 130 t SWL
MARINE LOADING HOSES
Locations of loading manifolds (port/stbd/both): A.8.1
no. in yes/no
2 +2 4 inch Camlock Yes Camlock 4”
Drilling Water Hose
Quantity: Size: Make/type: Color coding: Make/type connection: A.8.3
Primary port, secondary stbd
Potable Water Hose
Quantity: Size: Make/type: Color coding: Make/type connection: A.8.2
2 Chain Mat cert no. Fha-97-1424, grade U3 staulink 68 mm 283m, 309m Lloyds 3500KN
Towing Gear
Hook-up system: Rating: A.8
2 + 1 spare Hail 6 tonnes
no. in yes/no
2+2 4 inch Camlock Yes Camlock 4”
Gas Oil Hose
Quantity: Size: Make/type: Color coding: Make/type connection: Revision 01
no. in yes/no
Page 6 of 80
1+1 4 inch Avery Hardol dry disconnect coupling Yes Avery Hardol 4” Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE A.8.4
Mud Chemical Hose
Quantity: Size: Make/type: Color coding: Make/type connection: A.8.5
no. in yes/no
2+2 4 inch Camlock Yes Camlock 4”
Base Oil Hose
Quantity: Size: Make/type: Color coding: Make/type connection: A.8.7
yes/no
1+1 4 inch Avery Hardol dry disconnect coupling Yes Avery Hardol dry disconnect coupling 4”
Cement Hose
Quantity: Size: Make/type: Color coding: Make/type connection: A.8.6
no. in
no. in yes/no
2+2 4 inch Avery Hardol dry disconnect coupling Yes Avery Hardol dry disconnect coupling 4”
Brine Hose
Quantity: Size: Make/type: Color coding: Make/type connection:
no. in yes/no
2+2 4 inch Avery Hardol dry disconnect coupling Yes Avery Hardol dry disconnect coupling 4”
A.9 CRANES, HOISTS, AND MATERIALS HANDLING A.9.1
Aft Deck Crane
Quantity: no. Specification (API, etc): Make: Type: Location (stbd,port,aft, frwd): Boom length: m Hook reach below main deck (block/whip): ft/ft Block capacities and hoisting speeds Load/radius/speed (minimum radius): t/m/(m/sec) Load/radius/speed (maximum radius) t/m/(m/sec) Whip capacity/hoist speed (ld/rad./spd): t/m/(m/sec) Hook load indicator automatically corrected for boom angle: yes/no Alarm (audible, visual, both): Automatic brake: yes/no Safety latch on hooks: yes/no Crown saver (limit switch): yes/no Boom illumination: yes/no Baskets for personnel transfer: no.
Revision 01
Page 7 of 80
1 ABS Liebherr Electric Port Aft 30.5m (to waterline) 40 t @ 8.5 m 7 t @ 28 m 3 t @ 30.5 m Yes Audible Yes Yes Yes Yes 0
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
A.9.2
Fwd. Deck Crane
Quantity: no. Specification (API, etc): Make: Type: Location (stbd,port,aft, frwd): Boom length: Hook reach below main deck (block/whip): ft/ft Block capacities and hoisting speeds Load/radius/speed (minimum radius): t/m/(m/sec) Load/radius/speed (maximum radius): t/m/(m/sec) Whip capacity/hoist speed (ld/rad./spd): t/m/(m/sec) Hook load indicator automatically corrected for boom angle: yes/no Alarm (audible, visual, both): Automatic brake: yes/no Safety latch on hooks: yes/no Crown saver (limit switch): yes/no Boom illumination: yes/no Baskets for personnel transfer: no. A.9.3
no. t yes/no
47 t @ 28.0 m 15 t @ 33.2 m Yes Audible Yes Yes Yes Yes 1
1 Hyster electric 3000 kg Yes
Riser Gantry Crane
Quantity: Make: Type: Related Capacity: Location: A.9.5
60 t @ 6.2 m
Forklifts
Quantity: Make/type: Rated capacity: Explosion proof: A.9.4
1 ABS Liebherr Diesel Stbd Fwd 33.2 m (to waterline)
no.
1 SMST Gantry Crane 2x8 tons SWL Aft riser deck
BOP Handling System
Make/type: Rated capacity:
mt
Rauma Repola BOP Skid 200
Make/type: Rated capacity:
mt
Rauma Repola LMRP Skid 200
Make/type: Rated capacity:
mt
Rauma Repola Moonpool beams 200
A.9.6 Air Hoists/Derrick Winches A.9.6.1 Rig Floor Winches (Non man-riding) Quantity: Make: Revision 01
no. Page 8 of 80
3 Ingersoll Rand Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Type: Rated capacity: Wire diameter: Automatic brakes: Overload protection:
lb in yes/no yes/no
FA5A-24XK1G 10.000lb ¾” Yes Yes
A.9.6.2 Monkey Board Work Winch Quantity: Make: Type: Rated capacity: Wire diameter: Automatic brakes: Overload protection:
no. lb in yes/no yes/no
N/A N/A N/A N/A N/A N/A N/A
A.9.6.3 Rig Floor “Man-Riding” Winch Quantity: Make: Type: Rated capacity: Wire diameter: Non-twist wire: Automatic brakes: Overload protection: Automatic spooling: Certified for man-riding:
no. lt mm yes/no yes/no yes/no yes/no yes/no
2 Ingersoll Rand FA150KGI-MR12-1-EH SWL 150kg 10 Yes Yes Yes Yes Yes
A.9.6.4 Utility Winch (Cellar Deck Winch) Quantity: Make: Type: Rated capacity: Wire diameter: Automatic brakes: Overload protection: Automatic spooling: Certified for man-riding:
no. lt in yes/no yes/no yes/no yes/no
2 Ingersoll Rand. K6UUAAB 5T ¾” No No No No
A.9.6.5 Cellar Deck Winch “Man-Riding” Quantity: Make: Type: Rated capacity: Wire diameter: Automatic brakes: Overload protection: Automatic spooling: Certified for man-riding:
no. lb in yes/no yes/no yes/no yes/no
A 9.6.6 MOONPOOL PERSONNEL BASKET Cherry Picker Make/Type : Rated Capacity: kgs Revision 01
Page 9 of 80
2 Ingersoll Rand FA150KGI-MR12-1-EH SWL 150kg 10 Yes Yes Yes Yes
N/A N/A
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Reach of Arm: Meters Power System: Hydraulic Slew Slew Speed Extend Speed Tilt Speed Max Personnel in Basket Telescope out Meters Total reach Meters A.10
N/A Electrical/
N/A N/A N/A N/A N/A N/A N/A
HELICOPTER LANDING DECK
Location: Dimensions: Perimeter safety net: Load capacity: Designed for helicopter type: Tie down points: Covered by foam fire system: Heli-refueling system type: Fuel storage capacity: Helideck lighting to aviation specification as required by country of operation: Tie down points: A.11
N/A
ft x ft yes/no lt yes/no yes/no U.S.gals yes/no yes/no
Aft 72 ft x 72 ft Yes 10.0 tonnes Sikorsky S 61 Yes Yes Gordon’s Engineering – Offshore Type 5000 ltr Yes Yes
AUXILIARY EQUIPMENT
A.11.1 Water Distillation Quantity: Make/type: Capacity (each/total):
no. m3/day
3 Atlas AFGU 1-E-25 25 Each
A.11.2 Boilers Quantity: Make/type: Capacity (total system):
no. lbs/hr
2 Clayton WP EO_304 4409
A.11.3 Air Conditioning Quantity: Make/type: Capacity (total system):
no.
2 (Accommodation) Carrier 40 kg - Freon R22
A.11.4 Electric Welding Sets Quantity: Current capacity: Make/model: Type: Quantity: Current capacity: Make/model: Revision 01
no. amp
4 315 Tig 315 PAC / DC Thermadyne fixed/portable Portable no. amp Page 10 of 80
3 200 Thermadyne 200 (DC Inverter) Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Type: Quantity: Current capacity: Make/model: Type: Quantity: Current capacity: Make/model: Type: A.11.5 High Pressure Cleaner Quantity: Make/type: Electric/pneumatic/diesel: Max delivered pressure:
Revision 01
fixed/portable Portable no. amp
1 200 Tig-200S DC Inverter fixed/portable Portable no. amp
1 170 Intraud Inverter C-1800M fixed/portable Portable no. psi
Page 11 of 80
1 Koomey Electric 3000
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
B.
GENERAL RIG SPECIFICATIONS
B.1
DERRICK AND SUBSTRUCTURE
Make/type: Rated for wind speed With full set back: With no set back: Height: Dimensions of base: Dimensions of crown: Gross nominal capacity: Maximum number of lines: Ladders with safety cages and rests: Platform for crown sheave access: Counter balance, system for rig tongs and pipe spinning tong: Lighting system explosion proof: B.1.2
kts kts ft ft x ft ft x ft lb no. yes/no yes/no yes/no yes/no
ft no. no.
BJ Type V, 3 racking arms
Casing Stabbing Board
Make/type: Adjustable from/to height above rotary: B.1.5
ft/ft
Copy of BJ Type V 34 ft to 42 ft
Substructure
Make/type: Height (spider deck to drill floor): Length: Width: Setback capacity: Simultaneous setback + hookload capacity: Clear height below R/table beams: B.1.7
Sparrows Offshore 20.000ft 3 x 9.5”, 7 x 8” 4500ft range 2 - 9 5/8” casing (no dp in derrick)
Racking Arm
Make/type: B.1.4
45 kts 65 kts 175 ft 44.4 ft x 36.0 ft 22 ft x 24 ft 1,000,000 lb 14 yes yes Yes No Yes
Racking Platform
Make/type: Racking platform capacity of 5 ½” DP: Racking platform capacity of DC: Racking platform capacity of casing: B.1.3
Dreco / Rauma Repola Heavy Duty/Dynamic
m ft ft lb lb ft
Dreco / Rauma Repola 10.6 m (34.78 ft) 44.3” 36` 750,000 lb 1,400,000 lb 10.6m
Derrick TV Camera System
Camera located at: Make/type: Zoom/Pan/Tilt-function: Monitor located at:
Revision 01
yes/no
Page 12 of 80
Derrick Monkey board level x 3 Shakers x 1 Moonpool x 1 Yes Driller cabin / Client office / Toolpushers office / DP room
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
B.2
DRAWWORKS AND ASSOCIATED EQUIPMENT
B.2.1
Drawworks
Make/type: Motors make/type: Quantity: no. Maximum input power continuous: hp Maximum input power continuous: hp Drum type: Drum diameter: in Wire diameter: in Maximum line pull 12 lines: lb Maximum line pull 10 lines: lb Maximum line pull 8 lines: lb Spinning cathead type: Breakout cathead type: Crown block safety device make/type: Independent fresh water cooling system for Drawworks and electric brake: yes/no B.2.2
Auxiliary Brake
Make: Model: Independent back-up system type: B.2.3
Elmagco 7838 - water cooled Elmagco
Sandline
Make: Length capacity: Line size/type: Breaking strength: Safe working load:
m in lt lt
B.3
DERRICK HOISTING EQUIPMENT
B.3.1
Crown Block
Make/type: Rated capacity: No. of sheaves: Sheaves diameter: Sheave grooved for line size: B.3.2
Oilwell E-3000-UDB ASEA 3 x ASEA motors – 800 hp each 3,000 hp 2,400 hp Lebus groove 36 1 ½ in x 6 x 19 IWRC 1,200,000 lb 1,074,000 lb 880,700 lb Foster & Kelco Foster & Kelco 1 x DAQ MD Totco and 1 x Crown ‘O’ Matic Yes
Coastal 20,000 feet 9/16” FC XIP RRL (not installed) 20,000 lbs (5 to 1) 4,000 lbs
ton no. in in
Dreco / Rauma Repola 600 ton 7 60 in 1-1/2
ton no. in in
National / 760 H 650 ton 7 60 in 1 ½ in
Travel Block
Make/type: Rated capacity: No. of sheaves: Sheaves diameter: Sheave grooved for line size:
Revision 01
Page 13 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
B.3.4
Swivel
Make/type: Rated capacity: Test/working pressure: Gooseneck and washpipe minimum ID>= 76mm: Left hand pin connection size: Access fitting for wireline entry on top of gooseneck: B.3.5
Yes
in ft yes/no yes/no yes/no
yes/no
National EB yes
ft lt lt
Hydralift 25 ft 600,000 lb 1,300,000 lb
Crown Motion Compensator
Make/type: Stroke: Capacity - compensated: Capacity - locked: B.3.8
Block Guidance System
Make/type: B.3.9
Rauma Repola
Retraction System for Traveling Block
Make/type: B.4.1
Bridon Wire Rope 1 ½ in 6x19 RRL IWRC EIPS 10,000 ft yes yes yes Shore
Anchor Dead Line
Make/type: Weight sensor: B.3.7
yes/no
Drilling Line
Diameter: Type: Length (original): Support frame for drum/cover: Drilling line drum power driven: Spare reel drilling line: Location (rig, shore, etc.): B.3.6
yes/no in
Oilwell 495 650 ton 5000 Yes Yes 7-5/8R
ton psi/psi
Maritime Hydraulics
Rotary Table
Make/type: Maximum opening: in Rated capacity: ton Static load capacity: ton Rotating load capacity: mt @ rpm Two speed gearbox: yes/no Emergency chain drive: yes/no Driven by an independent electric motor: yes/no Electric motor type/make: Maximum continuous torque: ft lbs Drip pan/mud collection system: yes/no Revision 01
Page 14 of 80
Oilwell 495 49 ½ in 800 ton 800 ton Rotating Load capacity 600 mt @ 72 rpm Yes No Hydraulic motor ABB / ASEA 7000 Yes Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
B.4.2
Master Bushings
Make/type: Insert bowls (see G.1.7): B.4.4
in
Varco / Split MPCH 49 ½ in
Top Drive
Make: Type (electric/hydraulic): Rated capacity: Test/working pressure: If driven by electric motor Make/type: Output power: Maximum continuous torque: Two speed gearbox: Maximum rotary speed: Remote operated kelly cock: Cooling system type:
st psi/psi
Maritime Hydraulics DDM 650 HY Hydraulic 650 st 5000
hp ft lb yes/no rpm yes/no
55,000 ft lb Yes 225 rpm Yes
B.4.4.1 Top Drive Makeup/Breakout System Make: Model: Type: Max. breakout torque that can be applied by system:
Revision 01
Maritime Hydraulics Integrated in DDM 650 HY Pipe Handler ft-lbs
Page 15 of 80
78,000 ft-lbs
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
C.
POWER SUPPLY SYSTEMS
C.1
RIG POWER PLANT
C.1.1
Diesel Engines
Quantity: Make/type: Maximum continuous power: At rotation speed of: Equipped with spark arrestors: Mufflers installed: C.1.3
kVA rpm volts
6 Stromberg / HSPOL 12 / 953 alternator 3,300 kVA @ 6,000 V for each 1000 rpm 6,000 VAC
no. kW volts
8 7 Stromberg / 1Ross-Hill 720 VDC / 600V
Transformer System
Quantity: Make/type: Continuous power (each): Output volts: Frequency: Quantity: Make/type: Continuous power (each): Output volts: Frequency: C.1.6
no.
SCR System
Number of SCR: Make/type: Maximum continuous power (total): Output volts: C.1.5
hp rpm yes/no yes/no
6 Wartsila / 16V22B 3000 BHP each 1000 No Yes
AC – Generator
Quantity: Make/type: Continuous power: At rotation speed of: Output volts: C.1.4
no.
no. kVA volts Hz no. kva volts Hz
3 (Drilling) Trafo – Union / Geafol, Air Cooled 1,000 kVA 6000 / 380 VAC 50 3 (Drilling) Trafo – Union / Geafol, Air Cooled 2,500 kVA 6000 / 600 VAC 50
Emergency Shutdown
Emergency shutdown switches for the complete power Bridge, lifeboats fwd, lifeboats aft. system (AC & DC), located at the following points: E.R. control room. C.1.7
Auxiliary Power Supply
Power supply for a mud logging unit: Power supply available Output volts: Frequency: Current: Phase:
Revision 01
yes/no volts Hz amps single/three
Page 16 of 80
yes 380/220 50 Hz 100 A Both
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
C.1.8
Compressed Air System
Air Compressors - High Pressure: Quantity: Make: Model: Rated capacity: Working press: Prime mover (electric/diesel): Continuous power: Air dryers: Quantity: Make/type: Rated capacity: Main Rig Air Compressor Quantity: Make: Model: Rated capacity: Working press: Prime mover (electric/diesel): Continuous power: Air dryers: Quantity: Make/type: Rated capacity: Bulk Air Compressor Quantity: Make: Model: Rated capacity: Working press: Prime mover (electric/diesel): Continuous power: Air dryers: Quantity: Make/type: Rated capacity:
Starting Air Compressors Quantity: Make: Model: Rated capacity:
Revision 01
no. cfm psi kW no. m3/h no. m 3/min bar kW no. cfm no. m 3/min bar kW no. cfm
no. m 3/min
Page 17 of 80
2 Compair UK Ltd. 5437.1 N/A MAX 3045.8 psi Electric 45 kW (60 hp) 2 Zander HDK 140/250 160m3/h 3 Quincy Screw type QSI 540 8.72 m3/min 8 bar (116 psi) Electric 45kW(60hp) 2 Quincy 1000 cfm 1 Tamrock Screw type , SRM 390 EA 10.9 m3/min 4 bar Electric 55 kW (73,7 hp) 1 Quincy QDHP-1800 1800 cfm
2 Sperre HL2 – 105 1.4 m3/min
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Prime mover (electric/diesel): Continuous power: Air dryers: Quantity: Make/type: Rated capacity: C.2
EMERGENCY GENERATOR
C.2.1
Engine
Quantity: Make/type: Maximum output: At rotation speed: Starting methods (automatic, manual, air/hydraulic): C.2.2
kW no. cfm
no. kW rpm
Electric 11 kW / 50 Hz No N/A N/A N/A
1 Cummins / KTTA19G2 600 hp 1,500 rpm Twin batteries, twin electric starters
AC – Generator
Quantity: Make/type: Maximum output: At rotation speed: Output volts: Capable of back-feeding power to Main bus:
Revision 01
no. kW rpm volts yes/no
Page 18 of 80
1 Marathon Electric / 572RSL 4027BM-465W 500 kVA 1500 RPM 380 VAC Yes
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
D.
DRILLSTRING EQUIPMENT
D.1
TUBULARS
D.1.3
Drill Pipe
Drill pipe OD: Grade: Total length: Range: Weight: Internally plastic coated: Tool joint OD: Tool joint pin length (original): Tapered shoulder tool joints (box/pins): Connection type: Type of hardfacing: API classification: Thread protectors: Drill pipe OD: Grade: Total length: Range: Weight: Internally plastic coated: Tool joint OD: Tool joint pin length (original): Tapered shoulder tool joints (box/pins): Connection type: Type of hardfacing: API classification: Thread protectors: D.1.4
in m lbs/ft yes/no in in degree/degree
yes/no in m lbs/ft yes/no in in degree/degree
yes/no
5½ S 135 6,000 m Range 2 21.9 Yes 7 10 18° 5 ½ FH DSTJ High Torque Arnco 100XT Yes Yes 5 S 135 1,500 m Range 2 25.6 Yes 6 5/8 9¼ 18° 4 ½ IF (NC-50) Smooth type X Yes Yes
Drill Pipe Pup Joints
5½” Tool joint OD/ID: Grade: Length: Quantity: Weight: Connection type: Internally plastic coated: Thread protectors: 5” Tool joint OD/ID: Grade: Length: Quantity: Weight: Connection type: Internally plastic coated: Revision 01
in/in ft no. lbs/ft yes/no yes/no
in/in ft no. lbs/ft yes/no Page 19 of 80
7in x 4in S 135 5 ft, 10 ft, 15 ft 2, 4 and 2 of each 21.9 5 ½ FH DSTJ High Torque Yes Yes
6 5/8in x 2 ¾in S 135 5 ft, 10 ft, 15 ft & 20 ft 2 of each 25.6 4 ½ IF (NC-50) Yes Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Thread protectors: Heavy Weight Drill Pipe.Pup Joints Quantity Nominal size OD: Weight: Length Tool joint OD: Tool joint ID: Type of hardfacing: Internally plastic coated: Connection type: Thread protectors: D.1.6
Yes
in lbs/ft ft in in yes/no yes/no
n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a
Heavy Weight Drill Pipe (e.g. Hevi-Wate)
Quantity: Nominal size OD: Weight: Range: Tool joint OD: Tool joint ID: Type of hardfacing: Internally plastic coated: Connection type: Thread protectors: Quantity: Nominal size OD: Weight: Range: Tool joint OD: Tool joint ID: Type of hardfacing: Internally plastic coated: Connection type: Thread protectors: D.1.7
yes/no
no. in lbs/ft in in yes/no yes/no no. in lbs/ft in in yes/no yes/no
30 5½ 51 2 7 3½ Smooth-X Yes NKK 5 ½” FH DSTJ Yes 15 5 49 lb / ft 2 6½ 3 Type 3 Pro Casing Yes 4 ½ IF (NC-50) Yes
Drill Collars
Quantity: OD body: ID body: Nominal length of each joint: Drill collar body (slick/spiral): Recess for “zip” elevator: Recess for slips: Stress relief pin groove: Boreback on box: Connection type: Pup Joints
yes/no yes/no yes/no yes/no in no. x
Quantity: OD body: ID body: Nominal length of each joint:
no. in in ft
Revision 01
no. in in ft
Page 20 of 80
9 9½ 3 31.5 Spiral Yes Yes Yes Yes 7 5/8 in REG 1 x 10 ft, 1 x 20 ft 18 8 2 13/16 31 Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Drill collar body (slick/spiral): Recess for “zip” elevator: Recess for slips: Stress relief pin groove: Boreback on box: Connection type: Pup Joints Quantity: OD body: ID body: Nominal length of each joint: Drill collar body (slick/spiral): Recess for “zip” elevator: Recess for slips: Stress relief pin groove: Boreback on box: Connection type: Pup Joints D1.8
yes/no yes/no yes/no yes/no
no. in in ft yes/no yes/no yes/no yes/no
Spiral Yes Yes Yes Yes 6 5/8 in REG n/a 12 6½ 2¼ 31 Spiral Yes Yes Yes Yes 4 IF 1 x 12 ft
Short Drill Collars
Quantity: OD body: ID body: Nominal length of each joint: Stress relief pin groove: Boreback on box: Connection type:
no. in in ft yes/no yes/no
3 9½ 3 5”, 10’ & 20’ Yes Yes 7 5/8 Reg
Quantity: OD body: ID body: Nominal length of each joint: Stress relief pin groove: Boreback on box: Connection type:
no. in in ft yes/no yes/no
2
Quantity: OD body: ID body: Nominal length of each joint: Stress relief pin groove: Boreback on box: Connection type: D.1.10 Test Joints
no. in in ft yes/no yes/no
2 6½ 2¼ 12 ft Yes Yes 4 ½” IF
Quantity: Size OD: Type:
8 3 12’ Yes
Yes 6 5/8 Reg
no. in
1 5½ S-135
no.
0
D.1.14 Jar Intensifier Quantity: Make: Type (mechanical/hydraulic;up/down): OD body: Revision 01
in Page 21 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Min. ID body: OD fishing neck: Stroke: Connection type:
in in m
Quantity: Make: Type (mechanical/hydraulic;up/down): OD body: Min. ID body: OD fishing neck: Stroke: Connection type:
no. in in in in m
D.1.15 Inside BOP Valve Quantity: Make: OD: Min. drill pipe ID required: Connection type: Working pressure rating:
no.
Quantity: Make: OD: Min. drill pipe ID required: Connection type: Working pressure rating:
no.
in in psi
in in psi
2 Gray 6-3/8” 5 ½” FH DSTJ 10,000 PSI 1 Gray 6 ¾” 4 ½” IF 10,000 PSI
D.1.17 Circulation Head Quantity: Bottom connection type: Top connection type: Quantity: Bottom connection type: Top connection type:
no. Casing Buttress no. Drill Pipe
1 Each 5 ½”, 7”, 9 5/8”, & 13 3/8” Fig 1502 - 2” (Chiksan) 1 Each 4 ½ IF Pin, 5 ½” FH Pin, & 5 ½” FH Box Fig 1502 - 2” (Chiksan)
D.1.18 Safety Valves & Top Drive Safety Valves Quantity: Make/type: Actuator / Ball Valve Working pressure: Max. OD body: Min. ID body: Connection type:
no.
Quantity: Make/type: Actuator / Ball Valve Working pressure: Max. OD body: Min. ID body: Connection type:
no.
Quantity: Make/type: Actuator / Ball Valve
no.
Revision 01
psi in in in
psi in in in
Page 22 of 80
3 ITAG / Maritime Hydraulics, Top Drive 10,000 psi 6 ¾” 2 ¾” 6 5/8” Reg Box & Pin 2 Texas Iron Works 10,000 psi 7 ½” 2 ½” 5 ½” FH DSTJ 1 Texas Iron Works Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Working pressure: Max. OD body: Min. ID body: Connection type:
psi in in in
10,000 psi 7” mid section / 6 ½” ends 3 ¼” 4 ½” IF NC50
no. in
2 5 ½ FH Smith
no. in in
2 9 ½” 3” 7 5/8 Reg 7 5/8 Reg Yes 6R
D.1.22 Drop-In Valves Quantity: For nom. OD drillpipe: Make/type:
D.1.23 Bit Subs (Box-Box) Quantity: OD size: ID size: Top connection: Bottom connection: Bored for float valve: Float size: Quantity: OD size: ID size: Top connection: Bottom connection: Bored for float valve: Float size: Quantity: OD size: ID size: Top connection: Bottom connection: Bored for float valve: Float size: Quantity: OD size: ID size: Top connection: Bottom connection: Bored for float valve: Float size: Quantity: OD size: ID size: Top connection: Bottom connection: Bored for float valve: Float size: Quantity: Revision 01
yes/no in no. in in yes/no in no. in in yes/no in no. in in yes/no in no. in in yes/no in no. Page 23 of 80
2 8” 2 13/16” 6 5/8 Reg 6 5/8 Reg Yes 6R 2 6 ¾” 2 13/16” 4 ½ ” IF 4 ½ “ Reg yes 4R 3 7” 2 13/16” 5 1/2” FH DSTJ 5 1/2” FH DSTJ yes 4R 2 6 9/16” 3 ½” (NC46) 4” IF 4 1/2” Reg Yes 4R 2 Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE OD size: ID size: Top connection: Bottom connection: Bored for float valve: Float size: Quantity: OD size: ID size: Top connection: Bottom connection: Bored for float valve: Float size:
in in yes/no in no. in in yes/no in
6 ½” 3 ½” (NC50) 4 ½ IF 4 1/2” Reg Yes 4R 2 4 ¾” 2 3/8” (NC38) 3 ½” IF 3 ½” Reg yes
D.1.24 Crossover Subs Quantity: OD size (max/min): ID size: Top connection type / size: BOX Bottom connection type / size:
no. in/in in
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
2 9 ½” & 9 3/8” / 7” 2 7/8” 7 5/8” Reg 5 ½” FH DSTJ
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
2 9 ½” / 6 ½” 2 7/8” 7 5/8” Reg 4 ½” IF (NC50)
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
2 (s/n’s – COR3834 & 3835) 9 ½” / 6 9/16” & 9 9/16” / 6 ½” 3 1/16” 7 5/8” Reg 4” IF (NC46)
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
2 9 ½” / 8” 2 7/8” 6 5/8” Reg 7 5/8” Reg
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
2 8” & 8 1/8” / 7” & 7 ¼” 2 7/8” & 2 13/16” 6 5/8” Reg 5 ½” FH DSTJ
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
2 8 ¼” & 8 1/16” / 6 ½” 2 7/8” & 2 13/16” 6 5/8” Reg 4 ½” IF (NC50)
Revision 01
PIN
Page 24 of 80
2 9 ½” & 9 3/8” / 8 ¼”, Fn – 0.60 2 7/8” 7 5/8” Reg 6 5/8” Reg
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
2 8 1/16” / 6 ½” Both 2 5/16” & 2 3/8” 6 5/8” Reg 4” IF (NC46)
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size: Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN no. in/in in BOX PIN
2 7 ¼ x 9 7/16 2 7/8 5 ½” FH DSTJ 7 5/8” Reg 2 7 ¼ x 8 1/82 7/8 5 ½” FH DSTJ 6 5/8” Reg
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
6 (s/n’s – H7286, 7288, 7257, 7285) 7 1/8” to 7 ½” 2 13/16” to 3 ¾” 5 ½” FH DSTJ 4 ½” IF (NC50)
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
2 (s/n’s – COR3809 / 3810) 7” / 6 ½” 2 5/16” 5 ½” FH DSTJ 4” IF (NC46)
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
1 (s/n’s – COR3826) 7 1/16” / 4 13/16” 2 5/16” 5 ½” FH DSTJ 3 ½” IF (NC38)
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
2 6 ½ x 9 1/2 2 7/8” 4 ½” IF (NC50) 7 5/8” Reg
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
2 6 ½ x 8 1/8 2 13/16” 4 ½” IF (NC50) 6 5/8” Reg
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
6 (s/n’s – H6276, 6976, 6975, 7342) 7 1/8” to 7 7/16”) 3” to 3 3/8” 4 ½” IF (NC50) 5 ½” FH DSTJ
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
1 s/n – COR4268 6 ½” 2 ¼” 4 ½” (NC50) 4 ½” Reg
Revision 01
Page 25 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
2 (s/n’s – COR3833, 3832) 6 ½” / 9 ½” 3” & 3 1/16” 4” IF (NC46) 7 5/8” Reg
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size: Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN no. in/in in BOX PIN
2 (s/n’s – COR3813, 3814) 6 9/16” / 8 1/16” & 6 ½” / 8 1/16” 2 5/16” 4” IF (NC46) 6 5/8” Reg 2 (s/n’s – COR3811, 3812) 6 ½” / 7” 2 ¼” 4” IF (NC46) 5 ½” FH DSTJ
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
1 (s/n – COR4269) 6 ½” 2 ¼” 4 ½ Reg 4 ½” IF (NC50)
Quantity: OD size (max/min): ID size: Top connection type / size: Bottom connection type / size:
no. in/in in BOX PIN
1 (s/n – COR318GL) 4 13/16” / 6 3/8” 2 3/8” 3 ½” IF (NC38) 4 ½” IF (NC50)
D.
Junk Subs
Quantity: Make/type: For hole size: OD body: Connection type:
no.
Quantity: Make/type: For hole size: OD body: Connection type:
no.
Quantity: Make/type: For hole size: OD body: Connection type:
in in
in in no. in in
1 Bowen 15485 12 ½” up 9 5/8 in 6 5/8 REG 1 Bowen COR4324 8 ½” up 7 in 4 ½ REG 1 Bowen 15465 6 ½” – 7 ½” 5 ½” 3 ½” Reg
D.2.1 Drill Pipe Elevators, Air Operated / Manual
Revision 01
Page 26 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Size: Quantity: Make: Model: Rated capacity:
in no.
Size: Quantity: Make: Model: Rated capacity:
in no.
Size: Quantity: Make: Model: Rated capacity:
in no.
Size: Quantity: Make: Model: Rated capacity:
in no.
Size: Quantity: Make: Model: Rated capacity:
in no.
Size: Quantity: Make: Model: Rated capacity:
in no.
Size: Quantity: Make: Model: Rated capacity:
in no.
ton
ton
ton
ton
ton
ton
ton
Size: in Quantity: no. Make: Model: Rated capacity: ton For B & V elevators we have one set of 5 ½” inserts
5” (sn – COR548AD) 2 BJ GG, Manual 350 ton
5” (s/n – 7116 looks like BJ / no number for BV) 2 B & V / AOT Riser / Looks like BJ, no markings, Manual 500 ton 5 ½” (s/n – COR3856SIN) 1 Varco BJ HGG, Manual 500 ton 5 ½” 2 BJ / CTN GG / ???, Manual 350 ton 5 ½” s/n’s – IOT002, 506731, (IOT001 has been robbed) 3 BJ Varco GG, Air Operated 350 5” 2 B&V 44301-V, Air Operated 350 ton 5” s/n – CL815901 / 2 1 B&V 44301, Air Operated 500 ton 5 ½” 1 B&V 44301-V, Air Operated 350 ton Spare
D.2.2 Casing Side Door Elevators Size: Revision 01
in Page 27 of 80
30”
(s/n’s – 5558 / 3328) Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Quantity: Make: Rated capacity:
no.
2 SDS 250 ton
Size: Quantity: Make: Rated capacity:
in no.
20” (s/n – 6466) 1 SDS, B & V, 250/3 250 ton
Size: Quantity: Make: Rated capacity:
in no.
16” 1 SDS B & V, 250/2 250 ton
Size: Quantity: Make: Rated capacity:
in no.
13 3/8” 1 SC 150 ton
Size: Quantity: Make: Rated capacity:
in no.
9 5/8” (s/n’s – 0209 / no #) 2 B & V SDS / AOT SLX 250 ton / 150 ton
Size: Quantity: Make: Rated capacity:
in no.
7 5/8” 1 BJ Hughs 150 ton
Size: Quantity: Make: Rated capacity:
in no.
7” (s/n – 31239-136) 1 AOT SLX 150 ton
Size: Quantity: Make: Rated capacity:
in no.
5” (s/n – COR2336GL) 1 B&V 150 ton
Size: Quantity: Make/type:
in no.
20” (s/n – 0013) 1 King Oil Tools
Size: Quantity: Make/type:
in no.
16” 2 BV
Size: Quantity: Make/type:
in no.
13 3/8” (s/n’s – 0007 / PJ1-147) 2 King Oil Tools / BVM 183-8
Size: Quantity:
in no.
10 ¾” 1
Revision 01
Page 28 of 80
(s/n – 011100 228-0)
D.2.3 Single Joint Elevators f/ Casing
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Make/type:
?
Size: Quantity: Make/type:
in no.
9 5/8” (s/n’s – 0030 / PJ1-148-0035) 2 King Oil Tools / BVM type 183-8
Size: Quantity: Make/type:
in no.
7 5/8” 1 BJ
Size: Quantity: Make/type:
in no.
7” (s/n’s – 0002 / 0005-PJ1-149) 2 King Oil Tools / BVM type S
Size: Quantity: Make/type:
in no.
5” (s/n’s – COR3033BLH, COR3032BLH,(4550L) 3 AOT / (SLBB)
Size: Quantity: Make/type:
in no.
5” 2 BJ, 5 ton
Size: Quantity: Make/type:
in no.
5 ½” (s/n’s – COR2593BH / No #) 2 1 - Varco BJ / 1 - King Oil Tools, 5 ton
(s/n – RODS114)
D.2.3.A Single Joint Elevators f/ Drill Pipe
D.2.4
Drill Pipe Hand Slips
Size: Quantity: Make/type:
Body no.
5 ½” 6 sets, 4 - w/ 5 ½” Dies / 2 - w/ 5” Dies Varco / SDXL
Size: Quantity: Make/type:
Body no.
4 ½” 2 (s/n’s – H6877 / 6985) Varco SDXL
D.2.6
Drill Collar Slips
Size: Quantity: Make/type:
in no.
9 ½ in 2 Varco DCS-L
Size: Quantity: Make/type:
in no.
8 in 1 Varco DCS-L
Size: Quantity: Make/type:
in no.
6 ½” 1 Varco DCS-L
D.2.7
Drill Collar Safety Clamps
Quantity: Range:
no. in-in
Revision 01
Page 29 of 80
1 2 7/8” to 4 1/8” Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Quantity: Range:
no. in-in
1 5 ½” to 7”
Quantity: Range:
no. in-in
2 6 ¾” to 8 ¼”
Quantity: Range:
no. in-in
1 9 ¼” to 10 ½”
D.2.8
Casing Slips
Quantity: Size:
no.
1 9 5/8”
Quantity: Size:
no.
1 10 ¾”
Quantity: Size:
no.
1 13 3/8”
Quantity: Size:
no.
1 16”
Quantity: Size:
no.
1 20”
Quantity: Connection Type:
no.
4 7 5/8” Reg Pin, 5 ½” Shank
Quantity: Connection Type:
no.
5 6 5/8” Reg Pin, 5 ½” Shank
Quantity: Connection Type:
no.
5 NC 46
Quantity: Connection Type:
no.
5 4 ½” IF Pin, 5 ½” Shank
Quantity: For bit size:
no. in
1 26”
Quantity: For bit size:
no. in
1 17 ½”
Quantity: For bit size:
no. in
2 12 ¼”
Quantity: For bit size:
no. in
1 8 ½”
D.2.10 Lifting Subs
D.2.12 Bit Breakers
Revision 01
Page 30 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Quantity: For bit size:
no. in
1 6”
Quantity: For bit size:
no. in
1 5 7/8”
Quantity of sets: Make/type: Size: Length: Rated capacity:
no.
1 BJ 4 ½” 138” 500 Ton
Quantity of sets: Make/type: Size: Length: Rated capacity:
no.
Quantity of sets: Make/type: Size: Length: Rated capacity:
no.
Quantity of sets: Make/type: Size: Length: Rated capacity:
no.
D.2.13 Elevator Links
in m ton
in in st
in in st
in ft st
2 BJ 4 ½” 144” 500 ton 1 Ea BJ 3 7/8” 133” / 144” 350 ton 1 BJ 3 7/8” 96” 350 ton
D.2.15 Drillpipe Spinner Make/type: Size (max/min):
in/in
Gray, Mark 20, s/n - 861 4in to 8in
D.2.16 Mud Saver Bucket Make: Size:
in
Sub-Drill MS-V3A Pneumatic 5 ½”
D.2.17 Hydraulic Make-Up/Breakout Machine (e.g. Easy Torque) Make/type: Torque Range:
ft.lb
Maritime Hydraulics / Type MH 876 Up to 225,000 ft.lb
D.2.18 Rotary Rig Tongs Quantity (sets): Make / type: Size range (max OD/min OD): Torque rating: Quantity (sets): Make/type: Size range (max OD/min OD): Torque rating: Revision 01
no. in/in ft-lbs no. in/in ft-lbs Page 31 of 80
1 pr. BJ / SDD 4” to 12” 100,000 ft. lbs. 1 pr. B & V / 100 4” to 15” 100,000 ft. lbs. Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Quantity: Make/type: Size range (max OD/minOD): Torque rating:
no. in/in ft-lbs
Quantity: Make/type: Size range (max OD/minOD): Torque rating:
no. in/in ft-lbs
Quantity: Make/type: Size range (max OD/minOD): Torque rating:
no. in/in ft-lbs
Quantity: Make/type: Size range (max OD/minOD): Torque rating:
no. in/in ft-lbs
1 pr. B & V / 65 2 3/8” – 8 5/8” 65,000 ft/lbs 1 pr. BJ / F 2 3/8” – 8 5/8” 1 pr BJ / AAX 20” 1 pr, s/n H8300 BJ Type ‘C’ 3 ½”
D.2.21 Iron Roughneck Make/type: Size range (max OD/min OD): Torque rating D.3
FISHING EQUIPMENT
D.3.1
OVERSHOTS
in/in
Quantity: Make/type:
no.
Overshot OD: To catch size: Overshot guide OD: Extension sub length: & Wall Hook length Lipped guide (oversize, regular): Grapples (spiral, basket, both):
in in in in
Mill Extensions: To Mill Over Type ‘C’ Mill Guide for OD Pack offs: Top sub connection type:
yes/no
Quantity: Make/type:
no.
Overshot OD: To catch size: Overshot guide OD: Extension sub length: & Wall Hook length: Lipped guide (oversize, regular): Revision 01
in in in in
Page 32 of 80
Maritime Hydraulics, MH 1898, Manual 9 ½” / 3 ½” 100,000 ft.lb make up / 125,000 ft.lb break out
1 Houston Engineering simular to Bowen Series FS 150 11 ¾ in 10” 11 ¾”, 15”, & 24” 36, 42, 48, & 60” ; WH - 36”, 42”, & 48” 11 ¾”, 15”, & 24” 10 1/8”, 10”, 9 7/8”, 9-5/8”, 9 ½”, 9-3/8”, 9 ¼”, 9”, 8 7/8”, 8 1/8”, 8”, 7 7/8”,7 ¾”, 7-5/8”, 7 1/8”, 7”, 6 7/8”, 6 ¾”,6 5/8”, 6 ½”,6 3/8”, 6 ¼”, 5 ½”, 5-3/8”, 5” & 4 7/8” 6”, 5 ½”, & 5” 6 3/8”, 5 ½”, & 5” yes 6-5/8 Reg 1 Houston Engineering similar to Bowen Series FS 150 9-5/8” 8” 9 5/8” 42”, 48”, & 60”, WH – 42” 24”, 15” & 11” Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Grapples (spiral, basket, both): Type ‘C’ Mill Guide for OD Pack offs: Top sub connection type:
8”, 7-7/8”, 7 ¾”, 7-5/8”, 7 ½”, 7”, 6 ¾”, 6-5/8”, 6 ½”, 6-3/8”, 6 ¼”, 5 ½”, 5”, 4-7/8” 5 ½” & 5” yes/no
Quantity: Make/type:
no.
Overshot OD: To catch size: Overshot guide OD: Extension sub length: Lipped guide (oversize, regular): Grapples (spiral, basket, both): Mill Guide & Mill extension for OD Pack offs: Top sub connection type:
in in in ft
yes/no
Grapples (spiral, basket, both): for 5 ¾” Overshot
5 ¾” OD Extension sub length: D.3.2 Hydraulic Fishing Jar
Quantity: Make: Type (mechanical/hydraulic;up/down): OD body: Min. ID body: OD fishing neck: Stroke: Connection type:
1 Houston Engineering similar to Bowen Series 150 SH 7 7/8 in 6 ¾” 7 7/8” 36”, 42”, 48”, 60” & 42” Wall Hook 8 1/8”, 11” & 15” 6 3/4”, 6-5/8”, 6 ½”, 6-3/8”, 6 ¼”, 6-1/8’, 5 3/4”, 5”, 4 7/8”, 4 ¾”, 4-5/8”, 4 ½”, 4-3/8”, 4 ¼”, 41/8”, 3 ¾”, 3 ½”, 3-3/8” 5” yes 4 ½”IF 4 ¾”, 4 5/8”, 4 ½”, 4 3/8”, 4 ¼”, 4 1/8”, 4”, 3 ¾”, 3 ½”, 3 3/8” 3 ½”
Mill Guide & Mill extension for OD
Quantity: Make: Type (mechanical/hydraulic;up/down): OD body: Min. ID body: OD fishing neck: Stroke: Connection type:
Yes 6-5/8 Reg
36”, 42”, 48”, & 60” no. in in in m no. in in in in m
1 Bowen Oil Jar, Integral mandrel w/ 3 1/16” circ. hole 7 ¾” 3 1/16” 7 ¾” Complete free closing assembly 6 5/8” Reg Box x Pin 1 Bowen Oil Jar, Integral mandrel w/ 2 ¼” circ. hole 6 ¼” 2 ¼” 6 ¾” Complete free closing assembly 4 ½ in IF Box x Pin
D.3. MILLS Quantity: no. Make/ Type: f/ 15” hole w/ Itcoloy tungsten carbides OD body: Connection type:
1 Bowen 14 ¾” 7 5/8”
Quantity: no. Make/ Type: f/ 12 ¼” hole w/ Itcoloy tungsten carbides OD body: Connection type:
1 Bowen 12” 6 5/8” Reg
Revision 01
Page 33 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Quantity: no. Make/ Type: f/ 8 ½” hole w/ Itcoloy tungsten carbides OD body: Connection type:
1 Bowen 8 ¼” 4 ½” Reg
Quantity: no. Make/ Type: f/ 6 1/8” hole w/ Itcoloy tungsten carbides OD body: Connection type:
1 Bowen 5 7/8” 3 ½”
D.3.5
Fishing Bumper subs
Quantity: Make/type: OD body: Min. ID: Stroke: Connection type:
no.
Quantity: Make/type: OD body: Min. ID: Stroke: Connection type:
no.
D.3.6
in in in
in in in
1 Bowen 6 ¼” 2 ¼” 60 in 4 ½” IF
Safety Joints
Quantity: Make/type: OD body: Min. ID: Stroke: Connection type:
no.
Quantity: Make/type: OD body: Min. ID: Stroke: Connection type:
no.
D.3.7
1 Bowen 7 ¾” 3 ½” 60 in 6 5/8” Reg
in in in
in in in
1 Bowen Auto Lock Type 7 ¾” 3 ½” No Stroke 6 5/8” Reg 1 Bowen Auto Lock Type 6 ½” 3 ¾” No Stroke 4 ½” IF
Junk Baskets (Reverse Circulation)
Quantity: Make/type: p/n - 70910 For hole size: OD body: Connection type: Inside Magnet Available Mill shoes type B Revision 01
no. in in yes/no yes/no Page 34 of 80
1 Bowen 11” 12 ¼” 7 13/16” FN, 11 1/8” Body 6 5/8” Reg No Yes, 11” Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Quantity: Make/type: For hole size: OD body: Connection type: Inside magnet available: Mill shoes: type B
no. in in yes/no yes/no
Quantity: Make/type: For hole size: OD body: Connection type: Inside magnet available: Mill shoes type B
no.
1 Bowen 6 ¼” 6 5/8” to 7 3/8” Body 6 ¼” 4 ½” IF No Yes, 6 ¼”
in in yes/no yes/no
Quantity: Make/type: For hole size: OD body: Connection type: Inside magnet available: Mill shoes type B D.3.8
1 Bowen 7 7/8” 8 3/8” to 9 ½” 6 ½” FN, 7 7/8” Body 4 ½” n IF No Yes, 7 7/8” OD
no. in in yes/no yes/no
1 Bowen 8 ½” 5 ¾” Slick 3 ½” IF No Yes, 5 ¾”
Junk Subs in with Drilling Subs
D.3.10 Magnet Fishing Tools Quantity: Make/type: OD body: Connection type:
no.
Quantity: Make/type: OD body: Connection type:
no.
Quantity: Make/type: OD body: Connection type:
no.
1 Bowen 11” 6 5/8” Reg Pin
in
1 Bowen 7” 4 ½” Reg Pin
in
1 Bowen 5 3/4” 3 ½” Reg Pin
in
Lead Impression Blocks OD Conn. In.
in. 11 ½” 6 5/8” Reg Pin
OD Conn. In.
in. 8” 4 ½” Reg Pin
OD Conn. In.
in. 5 ¾” 3 ½” Reg Pin
Revision 01
Page 35 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE D.3.11 Taper Taps Quantity: Make/type: OD (Max/Min): OD body: Length: Connection type: Quantity: Make/type: OD (Max/Min): OD body: Length: Connection type: Quantity: Make/type: OD (Max/Min): OD body: Length: Connection type:
Revision 01
no. in/in in mtr no. in/in in mtr no. in/in in mtr
Page 36 of 80
1 Bowen 3 1/16” to 2 3/16” 4 ¾” 0.92 3 ½” Reg Box 1 Bowen 1 3/16in to 3 11/16in 6 1/8” 0.93 4 ½” IF 1 Bowen 4 ¾” to 1 ¾” 7 ¾” 0.94 6 5/8” Reg
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
E.
WELL CONTROL / SUBSEA EQUIPMENT
E.1
LOWER RISER DIVERTER ASSEMBLY (used when drilling for the surface casing)
E.1.1
Hydraulic Connector (Special)
Size: Make: Surface controlled hydraulic operated dump valves: Size: E.1.2
Riser adapter: Make/type: Size:
N/A in
yes/no yes/no yes/no in psi yes/no
YES YES NO 18-3/4” 10,000psi YES
yes/no
NO N/A NO
yes/no
Hydraulic Wellhead Connector
Size: Make/type: Working pressure: Hot tap for underwater intervention: Spare Connector same type: E.2.3
N/A in degrees
Alternate Hydraulic Connector
Alternate connector available: Connector make/model: Adapter available: E.2.2
N/A no. in
PRIMARY BOP STACK (from bottom to top)
Stack complete with -guide frame: -pick up attachment -transport base: Size (bore): Working pressure: H2S service: E.2.1
N/A
Flex Joint/Riser Adapter
Flex joint Make/type: Size: Max. deflection:
E.2
in
in psi yes/no yes/no
18-3/4” VETCO H-4 TYPE ‘E’ 10,000psi YES NO
Ram Type Preventers
Preventers: Quantity: Bore size: Working pressure: Make: Model: Revision 01
no. in psi
Page 37 of 80
1 LOWER DOUBLE 18-3/4 in 10,000 psi CAMERON U Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Type (single/double): Ram locks: yes/no Preventers connection type - top: Preventers connection type - bottom: Side outlets: yes/no Size: in Connection type: Preventers: Quantity: no. Bore size: in Working pressure: psi Make: Model: Type (single/double): Ram locks: yes/no Preventers connection type - top: Preventers connection type - bottom: Side outlets: yes/no Size: in Connection type:
DOUBLE YES / WEDGE LOCK 10 PSI HUBBED W/ SS BX – 162 GROOVE 10 PSI HUBBED W/ SS BX – 162 GROOVE YES 2 x 3 1/16 IN # 5 HUB 1 UPPER DOUBLE 18-3/4” 10,000 PSI CAMERON U DOUBLE YES / WEDGE LOCK 10 PSI HUBBED W/ SS BX 162 GROOVE 10 PSI HUBBED W/ SS BX 162 GROOVE YES 2 x 3-1/16” # 5 HUB
Preventers: Quantity: no. Bore size: in Working pressure: psi Make: Model: Type (single/double): Ram locks: yes/no Preventers connection type – top: Preventers connection type – bottom: Side outlets: yes/no Size: in Connection type: Pipe rams: Quantity:
no. Size:
3 5-1/2” & 3-1/2” x 7-5/8”
in E.2.4
Stack Configuration (Blind/Shear/Pipe/Variable)
Shear rams: Ram #1 Upper rams: Ram #2 Middle rams: Ram #3 Lower rams: Ram #4 Spacing between Middle Rams and Shear Rams: Position of side outlets - kill: Upper: Lower: Position of side outlets-choke: Upper:
BELOW RAM # 2 BELOW RAM # 4 BELOW RAM # 1
Lower: Revision 01
BLIND SHEAR 3-1/2” x 7-5/8” 5-1/2” 3-1/2” x 7-5/8” 2.34 METERS
BELOW RAM # 3 Page 38 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
E.2.5
Annular Type Preventer On Stack
Size: Working pressure: Make/type:
E.2.6
in psi
Mandrel
Make/type: Size: E.2.7
in
no. in psi yes/no
no. U.S.gal psi
38 LMRP / 18 BOP 15 5000
Hydraulic Control Pod/Receptacles
Quantity: no. Redundancy: % Color coded: yes/no Remote regulation of operating pressure for Functions requiring lower operating Pressure: yes/no Spare control pod: yes/no E.3
PRIMARY LOWER MARINE RISER PACKAGE (From Bottom to Top)
E.3.1
Hydraulic Connector
Make/type: Size: Working pressure: Hot tap for underwater intervention: Spare connector same type: E.3.2
4 INNER, 4 OUTER 3-1/8” T3 / DF 10,000 psi NO
Subsea Accumulators (see also E.7.1.-surface Accumulator Unit)
Quantity: Useful capacity per accumulator (w/o precharge): Bottle working pressure: E.2.9
CAMERON 18-3/4
Fail-Safe Hydraulic Valves (Kill and Choke)
Quantity on each side outlet: Size (ID): Make/type: Working pressure: Solid block: E.2.8
N/A
in psi yes/no yes/no
2 100 YES YES No
CAMERON 18-3/4” 15000 YES NO
Annular Type Preventer (LMRP)
Size: Working pressure: Revision 01
in psi Page 39 of 80
18-3/4” 5,000 psi Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Make/type: E.3.3
Flex Joint
Make/type: Size: Max deflection: E.3.4
DOUBLE HYDRIL / GL
in degrees
Riser Adapter
Make/type: Size: E.3.5
in
CAMERON / FLANGE x RF CONNECTION 18-3/4
Connection Lines to Riser
Type (rigid loops, coflexip, etc.):
COFLEXIP
E.6
PRIMARY MARINE RISER SYSTEM
E.6.1
Marine Riser Joints
Make/model: OD: ID: Wall thickness: Average length of each joint: Weight of one complete joint (in air): Quantity: Pipe material: Minimum yield strength: Type riser connectors: Bolts Pup Joints Quantity: ft Quantity: ft Quantity: ft Quantity: ft Quantity: Termination Joints Quantity: E.6.2
OIL STATES FLEX JOINT 18-3/4” 10 deg
in in in ft lbs no. grade lb yes/no
CAMERON / “RF” 21” 19.624” .688” 65 FT & 63 FT 22.200 70 JOINTS, 39 x 65 FT & 31 x 63 FT X80 2,000,000 lb RF YES / 6
no. Length:
1 25 FT
no. Length:
1 20 FT
no. Length:
1 15 FT
no. Length:
1 10 FT
no. Length
1 5 FT
no Length
1 5 FT
Telescopic Joint
Make/type: Size (ID): Stroke: Double seals: Revision 01
in ft yes/no Page 40 of 80
CAMERON / 21” RF 19.624 55 FT YES Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Spare telescoping joint: Location: Rotating support ring for riser tensioners: Connection points: E.6.3
1 5” 4” 5000 PSI
no. in in psi
2 3” 2.” 5000 PSI
in deg. yes/no
no. in in ft ft3 st/ft3
Cumming Corp. 65 21 “ 46” 15’ AVG 95%
Marine Riser Spider
Make/type: E.6.9
VETCO / DR-1 23” 30 YES
Buoyancy Modules (if Fitted)
Make: Quantity of buoyed riser joints: Riser tub OD: OD of buoyed riser joints: Length of each module: Volume of each module: Buoyancy in seawater: E.6.8
no. in in psi
Upper Ball (Flex) Joint
Make/type: Size: Maximum deflection: Spare upper ball (flex) joint: E.6.7
2 5” 3” 15000 PSI
Hydraulic Supply Lines
Quantity: Outside diameter: Inside diameter: Working pressure: E.6.6
no. in in psi
Booster Lines (if Fitted)
Quantity: Outside diameter: Inside diameter: Working pressure: E.6.5
type no.
YES On board CAMERON ROLLER BEARING 12
Kill/Choke Lines
Quantity: Outside diameter: Inside diameter: Working pressure: E.6.4
yes/no
CAMERON / HX
Marine Riser Gimbal
Make/type:
CAMERON / RUBBER SHOCK MOUNT
E.6.10 Riser Handling Tools Quantity: Type:
Revision 01
no.
Page 41 of 80
2 RF RISER HYDRAULIC
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE E.6.11 Riser Test Tools Quantity: Type: E.8
HYDRIL / FS 21-500 21” 500 psi 2 12 in 13-3/8”
no. in
1 12 in AFT N/A
in psi location location
Diverter Control Panels
Main panel Make: Model: Location: Locking/unlocking control: Remote panel Make: Model: Location: Locking/unlocking control: E.9
SUBSEA SUPPORT SYSTEM
E.9.1
Riser Tesioners
Quantity: Make/type: Capacity each Tensioner: Maximum stroke: Wireline size: Line travel: Independent air compressors: Independent air drying unit: E.9.6
in psi no. in in
Diverter Flowlines
Quantity: ID of Flowlines: Running from Diverter to: Valve types: Size: Working pressure: Control valve type (air/hydraulic/etc.): Remote: controlled from: E.8.2
2x2 CHOKE/KILL LINES & HYDRAULIC LINES
DIVERTER BOP (For installation in fixed bell nipple)
Make/type: Max. bore size: Working pressure: Number of Diverter outlets: Outlet ID: Insert packet size ID: E.8.1
no.
yes/no
ABB TYPE 80 KOOMEY ROOM YES
yes/no
ABB TYPE 80 RIG FLOOR / YES
no. lb ft in ft yes/no yes/no
12 NATIONAL OILWELL 120,000 lb 12 FT 2 in 48 FT YES YES
Tensioner/Compensator Air Pressure Vessels
Revision 01
Page 42 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Quantity: Total capacity: Rated working pressure: Pressure relief valve installed: E.10
no. ft3 psi yes/no
TEN 28 / COMP 20 TEN 1027 / COMP 734 TEN 2400 / COMP 3000 Yes
BOP CONTROL SYSTEM
E.10.1 Surface Accumulator Unit (see also E.2.8 & E.4.8 - Subsea Accumulators) Make: Model/type: Location: Soluble oil reservoir capacity: U.S.gal Oil/water mix capacity: U.S.gal/min Glycol reservoir capacity: U.S. gal No. of bottles installed: no. Useful capacity per accumulator (w/o pre-charge): U.S.gal Bottle working pressure: psi Control manifold model: Regulator type: Total useful accumulator volume (surface and stack) equals all Preventer opening and closing volumes: yes/no
ABB Type 80 HPU ROOM 300 40 300 66 15 3000 ABB Type 80 Gilmour TR YES
E.10.2 Accumulator Hydraulic Pumps Electric driven Quantity: Make: Model: Each driven by motor of power:
no. hp
Air driven Quantity: no. Make: Model: Each driven by motor of power: hp Flow rate of each pump: U.S.gals/min At minimum operating pressure: psi
2 Koomey TRIPLEX TYPE 80 60 HP N/A N/A N/A N/A N/A N/A
E.10.3 Driller’s Control Panel Graphic control panel at Driller’s position showing Subsea functions with controls for the following functions of the BOP stack Marine riser connector: All annular type Bop’s: All ram type Bop’s: Lock for ram type Bop’s : Wellhead and LMRP connector: Inner and outer kill and choke line valves: Low acc. pressure warning: Low reservoir level warning: Low rig air pressure warning: Pressure regulator for annular: Revision 01
yes/no yes/no yes/no yes/no yes/no yes/no yes/no yes/no yes/no yes/no
Page 43 of 80
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Flowmeter: Quantity of pressure gauges: Emergency push button for automatic riser disconnection: Other control functions: Control panel make: Control panel model:
yes/no no.
Yes Touch screen display Yes
yes/no
Yes ABB Type 80
E.10.4 Remote Control Panels Ability to operate main closing unit valves Directly: yes/no Quantity: no. Make/model: Locations: Operating system routing (Direct/via Primary Control Panel) E.11
Yes 2 ABB Type 80 DRILL FLOOR & TOOL PUSHER OFFICE Direct
SUBSEA CONTROL SYSTEM
E.11.1 Hose Reels Quantity: Location: Make/type: Maximum storage length each: Drive motor type:
no. ft
2 (Mux Reels) Moonpool Shaffer 7000ft Air
E.12 ACOUSTIC EMERGENCY BOP CONTROL SYSTEM Make/model: Type (fixed/portable): Number of functions: Type of functions: LMRP connector release: Shear ram close: Other: E.13
N/A no. yes/no yes/no
SUBSEA AUXILIARY EQUIPMENT
E.13.1 Hole Position Indicator Make/type Quantity of monitors: Monitor location: Monitor location: Recorder:
no. yes/no
Nautronix 2 Bridge Electronic workshop Yes
E.13.2 Riser Angle Indicator Make/type Quantity of monitors: Monitor location: Recorder:
no. yes/no
Make/type Revision 01
Nautronix. 1 Bridge Yes Nautronix.
Page 44 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Quantity of monitors: Monitor location: Recorder:
no. yes/no
1 Electronic workshop Yes
E.13.3 Slope Indicators Make: Quantity: Provision for installation on BOP: Pin connector: Other:
E.14
no. yes/no yes/no
Regan 3 Yes NA LMRP and flex joint
CHOKE MANIFOLD
E.14.1 Choke Manifold (for instrumentation, see H.3) Make: Minimum ID: Maximum WP: H2S service:
in psi yes/no
Quantity of fixed chokes: Make: Model: Size (ID):
no.
Quantity of adjustable chokes: Make: Model: Size (ID):
no.
Quantity of power chokes: Make: Model: Size (ID): Power choke remote control panel: Make: Location Glycol injection:
no.
in
in
in yes/no yes/no
T3 TYPE “FC” 3-1/16” 10,000 psi Yes None N/A N/A N/A 2 FLOW CONTROL H2 2” 2 FLOW CONTROL Hydraulic Operated 2” Yes Cameron Driller’s cabin No
E.14.2 Flexible Choke & Kill Lines (Connecting riser to drilling unit) Quantity: Make/type: ID: Working pressure: E.15
no. in psi
2 COFLEXIP 3 in 10,000 psi
BOP TESTING EQUIPMENT
E.15.1 Hydraulic BOP Test Pump Make: Model/type: Revision 01
Shaffer Electro-hydraulic triplex Page 45 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Pressure rating: Chart recorder:
psi yes/no
20,000 psi Yes
E.15.2 BOP Test Stump Quantity: Test pressure: Type: Size: Connected to deck (welded/bolted):
no. psi in
2 10,000 psi and 5000 psi Vetco 18-3/4 Skid mounted
E.16.6 Emergency BOP Recovery System Emergency BOP recovery system: Make/type:
Revision 01
yes/no
Page 46 of 80
NO
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
F.
MUD SYSTEM/BULK SYSTEM
F.1
HIGH PRESSURE MUD SYSTEM
System working pressure: psi System test pressure: psi Built to which design pressure:
5000 psi 7500 psi 5000 psi
F.1.1 Mud Pumps Quantity: no. Make: Model: Type: (Triplex/Duplex): Liner sizes available: in Mud pump drive motors: no. Motor type: Continuous power rating per motor: hp Fluid end: type Maximum working pressure: psi Test pressure: psi
3 2 - National Oilwell A1700-PT Triplex 5”, 5 ½”,6”, 6 ½” & 7”
ASEA 800 hp Southwest 5000 psi 7500 psi
Make: Model: Type: (Triplex/Duplex): Liner sizes available: in Mud pump drive motors: no. Motor type: Continuous power rating per motor: hp Fluid end: type Maximum working pressure: psi Test pressure: psi
1 – Continental Emsco FB1600 Triplex 5”, 5 ½”,6”, 6 ½” & 7”
Pump stroke counter: type
Spectrum 1000, Stienco, Totco digital gauges
Supercharging pump: type Driven by motor of power: hp Discharge/Suction line ID: in/in Revision 01
ASEA 800 hp Southwest 5000 psi 7500 psi
3 (Mission Magnum I – Mech Seal) Electrical motor 6”/ 8”
Page 47 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE M.P. Pulsation Dampener: type Reset Relief Valve: type Working flowrate per pump at 90% of max spm: Liner size: in Pump speed (90% of max.): spm Pump pressure: psi Working flowrate @ 100% volumetric output: U.S. gal/min
3 (2 – Hydrill, 1 - CE) Retsco Type “C”, 1500 to 5000 psi
5” to 7” 108 psi
F.1.2 Transfer Pumps/Mixing Pumps Transfer pumps Quantity: no. Make: Model: Type: Drive motor type: Power output: hp Mixing pumps Quantity: no. Make: Model: Type: Drive motor type: Power output: hp F.1.4
By Liner 5”/ 5000, 5 ½” / 4714, 6”/ 3960, 6 ½”/ 3380, 7” / 2910 psi By Liner 5”/ 2.55, 5 ½”/ 3.09, 6”/ 3.67, 6 ½”/ 4.31, 7”/ 5.00 G.P.S
2 Mission Fluid king Magnum 8 x 6 x 14 Electric 100 HP @ 380V
2 Mission Fluid King Magnum 8 x 6 x 14 Electrical motor. 100 HP @ 380V
Standpipe Manifold
Quantity of standpipes: no. Standpipes ID: in H-Type Standpipe manifold: yes/no Kill line outlet: yes/no Fill-up/bleed-off line outlet: yes/no Outlets (total): no. ID: in Type connections: Dimensions OD x ID: in x in Design standard: Revision 01
2 3 ½ in Yes Yes Yes 7 2” Fig 1502 2”, 3” & 4” Oilfield Page 48 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE F. 1.5
Rotary Hoses
Quantity: no. Make/type: ID x length: in x ft Snubbing lines: yes/no F.1.6
2 Gates 3 ½”. 85 ft. Yes
Cementing Hose
Type (coflexip, etc): Length: ft ID: in Working pressure: psi F.1.7
Gates, 50 ft 2” 5000 psi
Chiksan Steel Hoses
Integral on-screwed: yes/no Make/type ID: in Section length: ft Quantity: no.
Yes
Sweep swivels, make/type: Nom. size ID: in Quantity: Nom. size ID: in Quantity:
FMC/Chiksan 2”
FMC 2in 3.6m (total) 5
4
Yes Suitable for H2S service: yes/no F.2
LOW PRESSURE MUD SYSTEM
F.2.1
Mud Tanks
Quantity: no. Total capacity: bbl Height: ft Capacity, tank No. 1: bbl Type (active): Capacity, tank No. 2: bbl Type (active): Revision 01
10 (not counting the slug pit) 3123 bbl 8’ Active & 13’ Reserve
Active 158 bbl Active 400 bbl Page 49 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Capacity, tank No. 3: bbl Type (active): Capacity, tank No. 4: bbl Type (active): Capacity, tank No. 1: bbl Type (reserve): Capacity, tank No. 2: bbl Type (reserve): Capacity, tank No. 3: bbl Type (reserve): Capacity, tank No. 4: bbl Type (reserve):
Active 400 bbl Active 240 bbl Reserve 560 bbl Reserve 585 bbl Reserve 390 bbl Reserve 390 bbl
Capacity degasser tank: bbl Capacity Desilter Tank Capacity Desander Tank Capacity Return Tank Mud agitator in each tank yes/no Mud guns in each tank: yes/no
55 bbl 55 bbl 45 bbl 10 bbl Yes, except Active No. 1 Yes, active tanks
F.2.2 Settling Tank Quantity: no. Total capacity: bbl
1 1 x 55 bbl
F.2.3 Pill/Slug Tank Capacity: bbl Mud agitator: yes/no Mud guns: yes/no
Slug 140 bbl Yes No
F.2.4 Trip Tank Capacity: bbl Capacity/unit length: bbl/ft Level indicator: yes/no Electric pump make: Model/type: Motor output: hp Facility for casing fill-up: yes/no
Revision 01
40 bbl Dia 4’ x 16’ ht PVT – 2.4 bbl/ft Mission magnum x 2 4 x 3 x 13 40 hp no
Page 50 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Alarm and strip chart recorder (see H.1.11): yes/no
Visual & Alarm only
F.2.6 Chemical Mixing Tank Capacity: bbl Chemical mixer type:
63 bbl Agitator
F.2.7 Mud/Brine Storage Tanks Quantity: no. Total capacity: bbl
2 1500 bbls
F.2.8 Base Oil Storage Tanks Quantity: no. Total capacity: bbl Electric pump make: Model/type: Motor output: hp
2 750 bbls Mission magnum 4 x 3 x 13 40 hp
F.2.9 Shale Shakers Primary: Quantity: no. Make/model: Type: Driven by no. of electric motors: no. Design flowrate (total): bbl/min Adjustment G - Force
5 Mi Swaco / Mongoose PT9672300-03 2 -1000 gpm - 5o to + 3o 2.2 to 6.9
F.2.10 Desander Quantity: no. Make/model: Number of cones x size: no. x in Capacity gpm
1 Derrick DSI-10-3 3 x 10” @ 25 deg angle 1000
F.2.11 Desilter Quantity: no. Make/model: Number of cones x size: no. x in Capacity gpm
1 Derrick D-RND-CM-4-20 20 x 4” 1000
F.2.12 Mud/Gas Separator (Poor Boy) Make/type: Revision 01
RBF BS 55000 category Page 51 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Gas discharge line ID: in Gas discharge location, primary: Can discharge be tied into burner system: yes/no Working pressure Design pressure F.2.13 Degasser vacuum Quantity: Make/type: Centrifugal pump type: Centrifugal pump size: in x in Driven by electric motor of power: hp Discharge line running to: Vacuum pump make: Type:
10in Vents at top of separator to above crown. no .35 bar 10.3 bar 1 Swaco Mission Magnum 6 x 8 x 14 100 HP @ 380v Derrick leg – 20’ above windwall -
F.2.14 Mud Agitators Quantity: no. Make/model: Driven by electric motor of: kw Located in tanks (see F.2.1 for tank numbers):
3
Quantity: no. Make/model: Driven by electric motor of: kw Located in tanks (see F.2.1 for tank numbers):
2
Quantity: no. Make/model: Driven by electric motor of: kw Located in tanks (see F.2.1 for tank numbers):
4
Quantity: no. Make/model: Driven by electric motor of: kw Located in tanks (see F.2.1 for tank numbers):
1
Quantity: no. Make/model: Driven by electric motor of: kw Located in tanks (see F.2.1 for tank numbers):
1
Radicon M2000 18.5 kW Active tanks 2, 3 and 4
Radicon M2000 18.5 kW Reserve tanks 3 and 4
Brandt MA25R 7.5 kW Reserve tanks 1 and 2 (2 per each)
Brandt MA25R 5.5 kW Slug pit
Brandt MA5R 15 kW Chemical pit
F.2.15 Mud Hopper Revision 01
Page 52 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Quantity: no. Make/model: Feed pump make/model: Driven by motor of power: hp
4 Demco 8x6x14 Mission Fluid King Magnum Pump 100 HP @ 380v
F.2.16 Mud Laboratory and Facilities Separate room: yes/no Equipped with Mud balance: yes/no Marsh funnel: yes/no
F.3
BULK SYSTEM
F.3.1
Barite/Bentonite Silos
3m x 4m 1 3
Quantity: no. Capacity of each silo: lt Locations: Type weight loadcell: Manufacturer: Pressure rating: psi Relief valve(s) installed: yes/no F.3.2
5 Barite / 2 Bentonite 46 m3 ( 1624 ft 3) Silo Room None N/A 4.5 bar Yes
Cement Silos
Quantity: no. Capacity of each silo: lt Locations: Type weight loadcell: Manufacturer: Pressure rating: psi Relief valve(s) installed: yes/no Separate mud/cement loading facilitates: yes/no Discharge line for cement independent from barite/bentonite discharge line: yes/no F.3.3
5 46 m3 ( 1624 ft 3) Silo Room None N/A 4.5 bar Yes Yes Yes
Surge Tank for Barite/Bentonite
Revision 01
Page 53 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Quantity: no. Capacity of each silo: lt Locations: Type weight loadcell: Manufacturer: Pressure rating: psi Relief valve(s) installed: yes/no F.3.4
3 100 cu-ft 2 - Sack Storage Room, 1 – Active Pits M/D Totco 4.5 bar Yes
Surge Tank for Cement
Quantity: no. Capacity of each tank: lt Type weight loadcell: Manufacturer: Pressure rating: psi Relief valve(s) installed: yes/no F.3.5
1 100 cu-ft Cement unit M/D Totco 4.5 bar Yes
Bulk Transfer System (see also C.1.8 - Compressed Air Systems)
Independent air system for the silos and surge Tanks consisting of a high-volume low-\ pressure compressor and air dryer: yes/no Air reduced from main air supply through Pressure regulators: yes/no
Yes
Separate volume tank and drier: yes/no
Revision 01
Yes
Yes
Page 54 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
G.
CASING/CEMENTING EQUIPMENT
G.1
CASING EQUIPMENT
G.1.2 Klepo Inflatable Type Casing Thread Protectors For casing OD, quantity: For casing OD, quantity: For casing OD, quantity: For casing OD, quantity: For casing OD, quantity: For casing OD, quantity: For casing OD, quantity: G.1.3
in/no. in/no. in/no. in/no. in/no. in/no. in/no.
20in / 3 16 in / 3 13 3/8 in / 3 10 ¾” in / 3 9 5/8” in / 3 7 5/8” in / 3 5” / 3
Side Door Casing Elevator
Quantity: For OD casing: Make/type: Capacity:
no. in
Quantity: For OD casing: Make/type: Capacity:
no. in
Quantity: For OD casing: Make/type: Capacity:
no. in
Quantity: For OD casing: Make/type: Capacity:
no. in
Quantity: For OD casing: Make/type: Capacity:
no. in
Quantity: For OD casing: Make/type: Capacity:
no. in
Quantity: Revision 01
st
st
st
st
st
st no.
2 30in B.V 250 st 1 20in BV 150 st 1 16” in BV 150 st 1 13 3/8 in BJ / SLX 150 st 1 10 ¾” in BJ 150 st 1 9 5/8 in BJ / SLX 250 st 1
Page 55 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE For OD casing: Make/type: Capacity:
in
Quantity: For OD casing: Make/type: Capacity:
no. in
G.1.4
st
t
7 5/8in BJ / SLX 150 st 1 each 13 3/8in, 9 5/8in and 7in Varco / Air operated – elevator and spider 500 t
Single Joint Casing Elevators
Quantity: For OD casing: Make/type Safety latches: Quantity: For OD casing: Make/type: Safety latches: Quantity: For OD casing: Make/type: Safety latches: Quantity: For OD casing: Make/type: Safety latches: Quantity: For OD casing: Make/type: Safety latches: Quantity: For OD casing: Make/type: Safety latches: Quantity: For OD casing: Make/type: Safety latches: Quantity: For OD casing: Make/type: Safety latches: Quantity: For OD casing: Make/type: Safety latches:
Revision 01
no. in yes/no no. in yes/no no. in yes/no no. in yes/no no. in yes/no no. in yes/no no. in yes/no no. in yes/no no. in yes/no
1 20in BJ Yes 2 16 in BV Yes 2 13 3/8 in BJ Yes 1 10 3/4 in BJ Yes 2 9 5/8in BJ Yes 1 7 5/8in BJ Yes 2 7in BJ Yes 1 5 1/2in BJ Yes 2 5 in BJ Yes
Page 56 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
G.1.5
Slip Type Elevator/Spiders
Quantity: Make/type: Capacity: W/slips for OD casing sizes: G.1.6
no. st in
Casing Slips
Quantity: Make/type: For OD casing:
no.
Quantity: Make/type: For OD casing:
no.
Quantity: Make/type: For OD casing:
no.
Quantity: Make/type: For OD casing:
no.
G.1.7
Quantity: Make/type: For OD casing (max/min): Quantity: Make/type: For OD casing (max/min): Quantity: Make/type: For OD casing (max/min):
in
in
in
1 Varco / CMS-XL 13 3/8 in 1 Varco / CMS-XL 9 5/8 in 1 Varco / CMS-XL 7 in
no. in/in no. in/in no. in/in no. in/in
2 CB split 20in 1 Insert bowl #1 13 3/8in 1 Insert bowl # 2 9 5/8in 1 Insert bowl # 3 7in
Casing Tongs
Quantity (sets): Make/type: W/jaws for OD casing (max/min): G.1.9
in
1 Varco / CMS-XL 20 in
Casing Bowls
Quantity: Make/type: For OD casing (max/min):
G.1.8
1 Varco 500 ton 13 3/8”, 9 5/8” & 7”
no. in/in
1 WB / AAX 20in
Power Casing Tongs
Revision 01
Page 57 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Quantity: Make/type: W/jaws for OD casing (max/min): Max output torque: Torque indicator: Back-up arm:
no.
0
in/in ft lbs yes/no yes/no
G.1.10 Power Unit for Casing & Tubing Tongs Quantity: Driven by electric motor:
no. yes/no
0
G.1.11 Casing Circulating Head (Swedge) For OD casing: Connection type:
G.2
CEMENTING EQUIPMENT
G.2.1
Cement Unit
Owner: Free placement basis: Make/type: No. of triplex pumps: Maximum working pressure: Maximum flowrate (total): Unit power by (electric/diesel): Recirculating mixing system: Capacity: Motor power: Liquid additive system: Premix/batch tank: Quantity: Capacity (total): Pressure recorder: G.2.2
in
yes/no no. psi bbl/min yes/no bbl hp yes/no no. bbl yes/no
Schlumberger well services (Dowel) No Dowel 2 3” & 4 ½” 19,000 & 8500 psi 12 Bbls per min Diesel Yes 6 Bbls / 14 bbls 840 HP Yes No No Yes – 15K Martin Decker
Cementing Manifold
Discharge manifold working pressure: psi Cement pump discharge lines min. ID: in Cement pump discharge lines working pressure:psi G.2.3
13 3/8in / 9 5/8in / 7in 2in WECO 1502 top, buttress thread bottom
15,000 psi 2 in (discharge line to rig floor) 15,000 psi
Cement Head
Revision 01
Page 58 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Quantity: Type Max Hook Load lbs. Max Hook Load @ rated Torque lbs. Max Torque lbs. Nominal size OD: Pressure rating Connection type: Remote Plug Launching Unit G.2.4
no.
Na
ft/ in psi
Cementing Tubing
Revision 01
Page 59 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE H.
INSTRUMENTATION/COMMUNICATION
H.1
DRILLING INSTRUMENTATION AT DRILLER’S POSITION
H.1.1
Weight Indicator
Make/type: Sensor type: Calibrated for number of lines strung (6,8,10, 12, etc): H.1.2
Martin Decker Type EB
no.
2 HDI Instrumentation / 2000B 0 to 6000 psi
psi - psi
Quantity: Make/type: Pressure range:
no. psi - psi
Quantity: Make/type: Pressure range:
no. psi - psi no. psi - psi
Rotary Torque Indicator BOHR Instrumentation.
Motion Compensator Instruments
Make/type: Hook position indicator: Lock/unlock indicator: H.1.7
yes/no yes/no
BOHR Instrumentation, Stienco + HDI Digital Gauge.
One pump stroke indicator and one cumulative pump stroke counter for each pump: yes/no
Yes
Tong Torque Indicator
Make/type: H.1.9
HYDRALIFT Yes Yes
Pump Stroke Counters
Make/type:
H.1.8
1 BOHR Instrumentation. 0 to 10,000 psi
BOHR Instrumentation.
Make/type: H.1.6
1 HDI Instrumentation / 2000B 0 to 10,000 psi
Rotary Speed Tachometer
Make/type: H.1.5
2 BOHR Instrumentation. 0 to 10,000 psi
Choke Manifold Pressure Gauge
Quantity: Make/type: Pressure range:
H.1.4
12 lines
Standpipe Pressure Gauges
Quantity: Make/type: Pressure range:
H.1.3
no.
DCT-2
Pit Volume Totalizer
Revision 01
Page 60 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Make/model: Floats in active mud tanks: Floats in reserve mud tanks: Loss/Gain indicator: Alarm (audio and visual):
yes/no yes/no yes/no yes/no
BOHR Instrumentation. Yes Yes Yes Yes
yes/no
BOHR Instrumentation. Yes
Make/model: Chart recorder: Alarm:
yes/no yes/no
BOHR Instrumentation. No Yes
H.1.12 General Alarm System
yes/no
Yes
H.1.10 Mud Flow Indicator Make/model: High/low alarm (audio and visual): H.1.11 Trip Tank Indicator
H.2
DRILLING PARAMETER RECORDER
Quantity: Location - 1: Make/type: Quantity of pens:
no.
H.3
INSTRUMENTATION AT CHOKE MANIFOLD
H.3.1
Standpipe Pressure Gauge
Make/type: Pressure range (maximum): H.3.2
psi
1 HDI Instrumentation / 2000B 0 to 6000 psi
psi
1 HDI Instrumentation / 2000B 0 to 10,000 psi
Choke Manifold Pressure Gauge
Make/type Pressure range (maximum) H.3.1 and H.3.2 combined on one panel: Visible from choke operation position: H.4
no.
1 Toolpusher office + Company Man Office. BOHR Instrumentation. Printer
yes/no yes/no
NO YES
psi yes/no
HDI Instrumentation / 2000B 0 to 6,000 psi Yes
STANDPIPE PRESSURE GAUGE
Make/type: Pressure range: Visible from Driller’s position: H.5
DEVIATION EQUIPMENT
H.5.1
Measuring Device
Quantity: Make/type: Revision 01
no Page 61 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Deviation range: H.6
CALIBRATED PRESSURE GAUGES
Make/type instrument gauges: Size: Connection: Range: Quantity: Facilities to install gauges on: Standpipe manifold: Choke manifold: Cement unit:
in psi no. yes/no yes/no yes/no
H.7
RIG COMMUNICATION SYSTEM
H.7.1
Telephone System
No. of extentions: Make/type: Explosion proof: H.7.2
yes/no yes/no
Make/type: Explosion proof:
no.
yes/no
11 Driller’s house, bridge, monkey board, shale shaker room, cement unit, Koomey room, BOP MUX reels, mud pump room, AD’s shack, ROV shack and engine control room. Yes
Hand-Held VHF&UHF Radios
Quantity: Make/type:
no.
H.8
ENVIRONMENTAL INSTRUMENTATION
H.8.1
Temperature Indicators
Air temperature: Make/model: Sea water temperature: H.8.2
Yes Steenhans / P700 Yes (where applicable)
Drill Floor - Derrickman’s Talkback (For Intercom System)
No. of stations: Location:
H.7.4
yes/no
128 (possible) Mitel Yes (where applicable)
Public Address System
Can be combined with above: Make/type: Explosion proof: H.7.3
no.
- MD totco - 6” - 1/4" » - 100 – 5000 psi -2 Yes Yes Yes
yes/no
6+6 Entel
yes/no
Yes Barigo Yes
yes/no
Barigo No
yes/no
No
Barometric Pressure Indicator
Make/model: Recorder: Make/model: Recorder: Revision 01
Page 62 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
H.8.3
Humidity Sensing Indicator
Make/model: Recorder: H.8.4
No name no
yes/no
Deif Type 897.3C Yes (via DP logger)
yes/no
2 x Seatex MRU 5, 1 x Seatex MRU H Yes (via DP logger)
Wind Speed/Direction Meter
Make/model: Recorder: H.9
ADDITIONAL MODU SPECIFIC INSTRUMENTATION
H.9.1
Roll, Pitch and Heave Indicator
Make/model: Recorder: H.9.2
yes/no
Gyro Compass
Make/model: Located at: H.9.3
Echo Sounder
Make/model: Located at: Recorder: H.9.4
yes/no
Current Indicator
Make/model: Located at: Recorder: H.9.6
2 x Anshutz standard 20, 1 x Sperry MK37 DP Room
no
yes/no
no
Radar
Quantity: Make/model: Located at: Bandwidth:
no.
Quantity: Make/model: Located at: Bandwidth:
no.
H.10
Skipper GDS101 Bridge Yes
cm
cm
1 Kelvin Hughes Manta 2300 Bridge 3cm 1 Kelvin Hughes Manta 2300 Bridge 10 cm
RADIO EQUIPMENT
Location:
Bridge
H.10.1 SSB Transceiver Quantity: Make/model: Facsimile capable: Telex capable: Revision 01
no. yes/no yes/no Page 63 of 80
1 Sailor CU5100 no no Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Quantity: Make/model: Facsimile capable:
no. yes/no
1 JRC JSB-176 No
H.10.2 E.P.I.R.B.’s Quantity: Make/model:
no.
1 Tron 40S
no.
2/1 Sailor RT5022 DSC / Sailor 2047/D 4 Full Marine Band
H.10.3 VHF Radio Telephone Quantity: Make/model: Power: Channels:
watts
H.10.4 VHF Radio Transceiver Quantity: Make/model:
no.
2 Sailor RT5022 DSC / Sailor 2047/D
no.
1 Southern Avionics
H.10.5 Radio Beacon Transmitter Quantity: Make/model: Power:
watts
H.10.6 Aeronautical VHF Transceiver Quantity: Make/model:
no.
1 ICOM IC-A200
no.
1 Inmarsat C
H.10.9 Telex Quantity: Make/model: H.10.10 Satellite Communication System Make/model: Type: Facsimile link: Telex link: Telephone link: Other capabilities:
Revision 01
yes/no yes/no yes/no
Page 64 of 80
Sailor TT-3042C Sat C No Yes Yes N/A
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE I.
PRODUCTION TEST EQUIPMENT
I.1
BURNER
Make/type: Quantity: no. Capacity: bbl/day Weight: st Water requirement at 100 psi: bbl/min I.2
N/A (Client Third Party) N/A N/A N/A N/A
BURNER BOOM
Make/type: Quantity: no. Length: ft Horizontal: yes/no Height above sea level (at drilling draft): ft Walkway and handrails: yes/no Burner platform size: ft x ft Burner mounting rotatable: yes/no Regulatory approvals:
Hampco 1 24.09 m / 3.38 m retract position 1.85 m 12 m Yes 3 x 1.1 m Yes DNV certified
I.3
LINES REQUIRED ON BURNER BOOM
I.3.1
Oil Line
Pipe specification:
3in, SCH 80
in Working pressure: psi Connection type at burner end: type H2S: yes/no Pressure gauge connection at barge end: in I.3.2
1,500 psi 3in WECO 602
-
Gas Line
Pipe specification:
6in, SCH 80 - 8” on burner end, L= 10 ft
in Working pressure: psi
1,500 psi
Revision 01
Page 65 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Extended beyond burner by: ft Connection type at burner end: type H2S: yes/no Pressure gauge connection at barge end: in I.3.3
no any -
Water Line
Pipe specification:
3 in -SCH 80
in Working Pressure: psi Connection type at burner end: type Pressure gauge connection at barge end: in I.3.4
3 in - WECO 206 -
Air Line
Pipe specification:
4in, SCH 80
in Working Pressure: psi Connection type at burner end: type Pressure gauge connection at barge end: in I.4
300 psi
300 psi 4in WECO 602 -
SPRINKLER SYSTEM
Sufficient to give protection to rig and personnel against heat radiation damage from the burners: yes/no
Yes
I.5
FIXED LINES FOR WELL TESTING
I.5.1
Drillfloor to Separator Area
Type (screwed/welded, both): Quantity: no. Size ID: in Working pressure: psi Connection type on drill floor: Connection type at separator: Number of valves/lines: no. Size of valves: in Revision 01
Welded One 2 7/8” 5,000 psi 3” Fig 602 Union 3” Fig 602 Union One None
Page 66 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE H2S:
Yes yes/no
I.5.2
Separator Area to Burner Boom
Type (screwed/welded, both): Quantity: no. Size ID: in Working pressure: psi Connection type on separator: type Connection type at boom: type Number of valves/lines: no. Size of valves: in H2S: yes/no Valves installed near separator area for switching gas to either burner: yes/no I.5.3
no no
Mud Pumps to Burner Boom
Type (screwed/welded, both): Quantity: no. Size ID: in Working pressure: psi Number of valves required: no. Size of valves: in Connected to fire fighting pumps: yes/no Rated line capacity at 300 psi: bbl/hr I.5.4
Welded 1 3.15 in 300 psi 2 3” Yes
Rig Air System to Burner
Type (screwed/welded, both): Quantity: no. Size: in Working pressure: psi Non-return valves fitted: yes/no
-
I.6
AUXILIARY POWER AVAILABILITY
I.6.1
For Field Laboratory
Revision 01
Page 67 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Quantity: kw Volts: v Frequency: Hz I.6.2
380 Volts 3 Phase 380 VAC 1 Phase 220 VAC 50 Hertz
For Crude Transfer Pump
Quantity: kw Volts: v Frequency: hz I.6.3
Rig Supply
Rig Supply 380 Volts 3 Phase 380 VAC 1 Phase 220 VAC 50 Hertz
For Electric Heaters
Quantity: no. Volts: v Frequency: hz
Revision 01
Rig Supply 380 Volts 3 Phase 380 VAC 1 Phase 220 VAC 50 Hertz
Page 68 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE K.
ACCOMMODATIONS
K.1
OFFICES
K.1.1
Company Representative’s Office
Quantity: no. Complete with desk, filing cabinets (s) and other necessary furniture: yes/no Unrestricted view to drill floor: yes/no K.1.2
Yes
Radio Room 1
Hospital Room
Number of beds/bunks: no. Full Bathroom: Wash basin: yes/no Medical cabinet: yes/no Dangerous drugs: yes/no K.2
LIVING QUARTERS
K.2.1
Accommodations
2 Yes 1 5 1 (kept locked)
Total beds: no. Quantity of single bed rooms: no. toilets (private/shared/communal): Quantity of two bed rooms: no. toilets (private/shared/communal): K.2.2
116 6 6 private + 55 10 private, 35 shared (semi-private, 2 cabins, 1 bathroom) and 10 communal.
Galley
Quantity: no. K.2.3
Yes
1
Quantity: no. K.1.4
Yes
Contractor’s Representative’s Office
Quantity: no. Unrestricted view to drill floor: yes/no K.1.3
2
1
Mess Seating Capacity
Revision 01
Page 69 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Main mess: no. Aux. mess: no. K.2.4
1
Recreation Rooms
Quantity: no. Recreation facilities: TV: no. DVD: no. Pool Table: no. Ping Pong Table: no. Computer: no. Other: DVD K.2.6
20
Meeting Rooms
Quantity: no. K.2.5
45
1 Yes Yes No. No. No. No.
Other Rooms
Laundry: no. Dry food storage: no. Refrigerator: no. Change rooms: no. Training Room Workout/weight room: no.
Revision 01
Yes (1) Yes (1) Yes (5) 2 No Yes (1)
Page 70 of 80
Updated: June 23rd 2008-06-23
L.
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE SAFETY EQUIPMENT
L.1
GENERAL SAFETY EQUIPMENT
L.1.1
General Personnel Protective Gear
Safety hats (contractor only/everyone/not supplied): Safety boots (contractor only/everyone/not supplied): Safety clothing (contractor only/everyone/not supplied): Ear protection (contractor only/everyone/not supplied): Rubber gloves (contractor only/everyone/not supplied): Fullface visors (contractor only/everyone/not supplied): Eye shields (for grinding machines, etc.) (contractor only/everyone/not supplied): Dust masks: (contractor only/everyone/not supplied): Rubber gloves - elbow length for chemical handling (contractor only/everyone/not supplied): Explosion proof hand torches c/w batteries (contractor only/everyone/not supplied): Safety belts c/w lines (contractor only/everyone/not supplied): L.1.2
Contractor only (available in the warehouse). Contractor only (available in the warehouse). Everyone (available places requested). Everyone (available places requested). Everyone (available places requested). Everyone (available places requested). Everyone (available workshops related). Everyone (available places requested).
in the warehouse and in the in the warehouse and in the in the warehouse and in the in the warehouse and in the in the warehouse and in the in the warehouse and in the
Everyone (available in the places requested). Everyone (available in the workshops related).
Eye Wash Stations
Quantity: no. Make/model: Located at: Located at: Located at: Located at: Located at: Located at: Located at: Located at: Located at: Located at: Located at: Located at: Located at: L.1.3
Contractor only (available in the warehouse).
13 5 x Haws (Container), 8 x North (Bottles) - Mud Pump Room - Sack Store - Mechanic Workshop - Rig Floor - Shaker Floor - Welding Shop - near Heli Deck - Electricians Workshop - Entrance to accommodation (Tea - room) - Battery Room Portside - Level 8 - Battery Room Starboard Aft (stores) - Mud Lab Entrance - Starboard Compression Room
Derrick Safety Equipment
Derrick escape chute (rem chute): no. Revision 01
Yes Page 71 of 80
Updated: June 23rd 2008-06-23
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Make/type: Derrick safety belts: no. Make/type:
DBI/ Sala Yes
DBI / Sala
L.2
GAS/FIRE/SMOKE DETECTION
L.2.1
H2S Monitoring System
Make/type: Sampling points at:
General alarm: yes/no Alarm types (audible, visual, both) at Driller’s console: Engine room: Mud room: Living quarters each level: Central area each structural level: Central alarm panel: yes/no Located at: L.2.2
Yes Yes Yes Yes Yes
ECR
Combustible Gas Monitoring System
Make/type: Sampling points at: Bellnipple: yes/no Drill floor: yes/no Shale shaker: yes/no Mud tanks: yes/no Ventilation system into living quarters: yes/no Other: General alarm: yes/no Alarm types (audible, visual, both) at Driller’s console: Other: L.2.3
Draeger Above reserve pit #2, port side MP1, between shale shakers #1 and #2, rig floor (port side), engine air intake (starboard side), port side of BJ cement unit, air conditioning fan room inside the starboard and port side intakes. (14 points) Yes
Draeger Yes. Yes. Yes. Between shale shakers 1 and 2, and 2 and 3. Yes. Starboard side mud pit 3, port side mud pit 2, between mud pits 1 and 2, reserve pits 1 and 4. Yes. Cement unit, port side engine air intake, port side deckhead level, port side bulk transfer room, between desilter pumps 1 and 2, and chemical pit. Yes Yes Yes
H2S Detectors (Portable)
Revision 02
Page 72 of 80
Updated: October 08th 2008-10-08
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Quantity: no. Make/type: L.2.5
2
Oldham. MX 2100
Explosimeters / 02 Indicator
Quantity: no. Make/type:
2
Quantity: no. Make/type:
2
L.2.6
Oldham. MX 2100
Oldham MX 2100
Fire/Smoke Detectors Accommodation
Make/type: Fire detection: yes/no Smoke detection: yes/no Central alarm panel: yes/no Location: L.3
FIRE FIGHTING EQUIPMENT
L.3.1
Fire Pumps
Minerva Yes Yes Yes Bridge and Engine Control Room
Quantity: no. Make/model: Type: Output (each): U.S.gals/min All offtake points supplied by each pump: yes/no Location of pumps: Fire fighting water delivery conforms to IMO MODU Spec: yes/no
1
Quantity: no. Make/model: Type: Output (each): U.S.gals/min All offtake points supplied by each pump: yes/no Location of pumps:
1
Revision 02
JMW/Z12-125 Centrifugal 120 m3/h Yes Aux Pump Room STB Yes
JMW/Z12-125 Centrifugal 90 m3/h Yes Propulsion Room
Page 73 of 80
Updated: October 08th 2008-10-08
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Fire fighting water delivery conforms to IMO MODU Spec: yes/no
Yes
FOAM PUMP Quantity: no. Make/model: Type: Output (each): U.S.gals/min Location of pumps:
1 Combibloc 'R' / CC80-315 Centrifugal 220 m3/h Mud Pump Room PS
EMERGENCY DIESEL FIRE PUMP Quantity: no. Make/model: Type: Output (each): U.S.gals/min All offtake points supplied by each pump: yes/no Location of pumps: L.3.2
Lombardini F-3A4060 Centrifugal (Diesel driven) 37.5m3/hr Yes Forward Thruster Room
Hydrants and Hoses
Hydrants positioned such that any point may be reached by a single hose length from two separate hydrants: yes/no Quantity of hydrants: no. Hose connections/hydrant: no. Hose max. diam.: in Length: ft L.3.3
1
Yes 64 John Morris 2.5 inch 50ft
Portable Fire Extinguishers
Quantity (total): no. Type 1 - CO2: no./lbs Type 2 – Foam Type 2 – Dry Chemical: no./lbs Type 4 - Water no./lbs
Revision 02
229 52 48 111 18
Page 74 of 80
Updated: October 08th 2008-10-08
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Mounted adjacent to access ways and escape routes: yes/no L.3.4
Fire Blankets
Location: Quantity: no. L.3.6
Helideck, Galley, Engine Control Room 4
Helideck Foam System
Dedicated system adequate for at least 10 minutes fire fighting at the rate quoted in the IMO MODU code: yes/no Quantity of monitors: no. Foam type: Rate: U.S.gals/min L.3.7
3 AFFF 1% 155l per min
Fixed Fire Extinguishing System
Protected spaces Engine room, type (Halon/CO2): Paint locker, type (Halon/CO2): Emergency generator, type (Halon/CO2): SCR room, type (Halon/CO2): Other - location: Cargo pump room, thrusters rooms, boiler room, fwd aux. mach. room, buzz type panel rooms, engine control room, galley, switchboard rooms, purifier rooms, IGG room, drilling switch gear room and cement room. Alarms (audible, visual or both): Automatic shutting of mechanical ventilation in protected spaces: yes/no Remote manual release located at: Remote manual release located at: L.3.8
Yes
CO2 CO2 CO2 CO2 ER pump room Bow thruster room
Both Yes Poop deck CO2 locker. Deck 5 PS Outside Accommodation
Manual Water Deluge System yes/no
Protected spaces: Water supplied from fire main line: yes/no L.3.9 Water Sprinkler System in Accommodation Revision 02
Drill Floor Aft Deck – Flare Boom Area Heli Fuel Tanks Area Yes No. Page 75 of 80
Updated: October 08th 2008-10-08
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE Automatic: yes/no Working pressure: psi Pressurized tank capacity: ft3 L.4
BREATHING APPARATUS
L.4.1
General Sets
N/A N/A N/A
Quantity: no. Make: Type: Cylinder Capacity min Located at: qty/loc L.4.2
12 Draeger PA 90 plus 300 bar Fire Station 1,2,3, ECR & Helideck
Escape Sets
18
Quantity: no. Make/type: Bottle duration: min Located at: L.4.4
Sabre Elsa / 200 bar 10 min Bridge, Drill Floor, Drilling Office, ECR, Monkey Board, Mud Treatment Area & Sack Store
Breathing Air Recharge Compressor
Quantity: no. Make/type: Located at: L.4.6
1 Bauer Compressor Safety Locker
Air Purity Test Equipment
Quantity: no. Make/type:
0 N/A
L.5
EMERGENCY FIRST AID EQUIPMENT
L.5.1
First Aid Kits
Quantity: no. L.5.2
6
Burn Kits
Revision 02
Page 76 of 80
Updated: October 08th 2008-10-08
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Quantity: no. L.5.3
2
Resuscitators
Quantity: no. Charged (spare) oxygen cylinders: no. L.5.4
1 5
Stretchers
Quantity: no. Type:
8 2 Scoops, 2 Soft Collapsible Stretchers, 1 Spine Board, 3 baskets + 1 kad (confined space), 2 x Hospital, Rig Floor, Pipe Deck Fwd, Helideck, Safety Locker, ER
Located at: L.6
HELIDECK RESCUE EQUIPMENT
L.6.1
Storage Boxes
Quantity: no. Construction material: Max. height open: in L.6.2
1 Fiberglas 1.8 m
Equipment
HLO jacket HLO safety knife Boots Helmets Wheel Chocks Lashing Equipment Helicopter Prohibited flag Safety Line Harness Red Emergency signal Torch Large Axe Aircraft Type Axe Marshalling Batons Earthing pole Bolt cutter Hacksaw Crowbar Metal Ladder Grab Hook Pliers Screw Drivers Sand bags
Revision 02
4 2 2 2 2 1 1 2 2 2 1
1 1 1 1 1 1 1 1 1 1 4
Page 77 of 80
Updated: October 08th 2008-10-08
L.7
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE RIG SAFETY STORE
Equipment to repair, recharge and restock safety equipment as listed below: Reflective tape Volante P/Hydrant Copper Hydrant handle Fire Hydrant Gaskets International Shore Connection Hydrant Cap Fire hose/ John Morris coupling Foam Branches Wyes plain Brass JM style coupling 2.5 inch Fire branch/Nozzle Fire box Empty Ladder rope Life Jacket light spare Life Jacket whistle Carabina lock type Axe Big Axe Small Emergency lens cleaning station Ear Protectors for V-Guard helmet Lock Out boxes Master lock Valve lock out Life boat safety belts Stretcher Lynx Tripod BA Control Board Wind Sock Life Buoy Shovel AFFF 3% 20 l Safety Harness Lanyard Fall Arrestor
L.8
2 11 25 100 2 22 3 3 4 5 3 2 60 60 12 1 1 6 8 10 2 sets 80 2 1 1 4 7 9 3 8 14 10
EMERGENCY WARNING ALARMS
Approved system to give warning of different emergencies: yes/no L.9
SURVIVAL EQUIPMENT
L.9.1.
Lifeboats
Make/type: Quantity: no. Capacity: person/craft Revision 02
Yes
Fiskars Oy 4 58 pers each Page 78 of 80
Updated: October 08th 2008-10-08
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Locations (fore, aft, port, stbd): Fire protection: yes/no Radios: yes/no Flares: yes/no Food: yes/no First aid kits: yes/no L.9.2
Yes, as per SOLAS
Yes, as per SOLAS specifications / VIKING 12 10 x 20 person, 2 x 25 person No Forward, midships, aft. No Hand held from Bridge Yes, as per SOLAS Yes, as per SOLAS Yes, as per SOLAS
NORSAFE Merlin 5.8m 36 HP outboard diesel motor
Sterns Inc/Regatta 225
Life Buoys
Make/type: Quantity: no. L.9.6
Yes, as per SOLAS
Life Jackets
Make/type: Quantity: no. L.9.5
Yes, as per SOLAS
Rescue Boat
Make/type: Engine power: hp L.9.4
VHF, All Marine freq
Life Rafts
Make/type: Quantity: no. Capacity: person/craft Davit launched: yes/no Locations (fore, aft, port, stbd): Fire protection: yes/no Radios: yes/no Flares: yes/no Food: yes/no First aid kits: yes/no L.9.3
2 forward, 2 aft Yes, water sprinkler
Besto buoy/ DK-86 14
Work Vest
Make/type: Revision 02
Zero Industries/ Souwester Working vest Page 79 of 80
Updated: October 08th 2008-10-08
RIG AND EQUIPMENT SPECIFICATIONS FOR DEEP VENTURE
Quantity: no. L.9.7
20
Escape Ladders/Nets
Make/type: Quantity: no. L.9.8
Manila 4
Distress Signals
Make/type: Quantity: no.
Pains Wessex / Smoke /light 2
Make/type: Quantity: no.
Pains Wessex / Parachute 12
Make/type: Quantity: no.
Pains Wessex / Rocket Line 4
M.
POLLUTION PREVENTION EQUIPMENT
M.1.
SEWAGE TREATMENT
Make/model: System type: Conforms to (Marpol, Annex IV, etc.): M.2
2 x Unex Bio-60 chemical and mechanical Yes
GARBAGE COMPACTION
Make/model:
TECH OIL PRODUCTS / Enviro-Pac Compactor 3000AMR Hydraulic Yes
System type: Conforms to (Marpol Annex IV, etc.) M.3
GARBAGE DISPOSAL/GRINDER
Make/model: System type: Conforms to (Marpol Annex IV, etc.):
Revision 02
SINKMASTER Commercial Disposer 2 HP Electric Yes
Page 80 of 80
Updated: October 08th 2008-10-08