815-201 MT-LT [PDF]

Zitiervorschau

RAPPORT D'EXAMEN PAR MAGNETOSCOPIE MAGNETIC PARTICLE EXAMINATION REPORT

Référence du Projet/Project Reference : IE0164

Date :

Report N°: IE 0164/MT/102

12/15/2016

Lieu / Location : SFAX Client : Objet/Object :

Maitre d'œuvre/ Owner : WDI Documents de Référence/ Reference DOC : Procédure / Procedure N°: Code de référence/ Reference Code : Critère d'accept./Acceptance Criteria : Contrôle Visuel/Visuel examination :

INAP MPI of ISO Corners before and after Load Test

NA QP/NDT-MT/01 Rev 00 EN 1290 EN 1291 Level 1 Conform

Vigil Camp - Office / 1 Man sleeper Description : Identification : 814-201 Matière/Material : Epaisseur/thikness : NA S235 JR Examen / Examination: Avant TT/Before PWHT Après TT/After PWHT X Traitement Thermique(TT) NA / PWHT NA Etendue de l'examen/Extent of Examination: 100% Spots Etat de surface /Surface condition Consommable / Consumable Conditions d'examen/ Exam Condition Brute : Visible : Température/ Temperature (°C) : 18 Brossée/ Brushed : Fluorésent/ Fluorescent : Humidité/ Humidity (%) : 75 Sablée/ Sandblasted : Type du fond blanc/ Background type :B104 A Eclairage / Lighting: Naturel / Natural Attaque chimique/ Type de révélateur Mag./ B103 C Artificiel/ Artificial Type : NA Chemical attack : Magnetic developer type : Valeur en luxe / Luxury Value : > 1000 Equipements: Electro-aiment/ Electro magnet Aiment permanant / permanent magnet N° de série/Serial number: 16823 Tension/ Current : 220 V Date Étalonnage/Calibration Date : 28/03/2016 Zone de réparation / Identification / Identification Conformité/Conformity Défauts/Defects

Caniveaux/ Undercut

Piqure/ Hole

Soufflure/ Porosity

NA

Fissure / Crack

Epaisseur / Thickness (mm)

NA

Corrosion /exessif

Diamètre/ Diameter (Inch)

NA

NC :non conforme/ Not Conform

Welder N°

N° Soudeur/

4 ISO-CORNERS Welds

C : conforme / Conform

Weld N°

Soudure N° /

Repair Area

C: NC : C: NC: C: NC : C: NC : C: NC : C: NC : Schéma / Sketch:

No repair zone

Observation All Iso-corners welds were MPI inspected before and after load test and all area was found to be free of surface defects at the time of inspection. In accordance with BS7072 Regulations validity of this certificate is 12 months from last inspection. L'Inspecteur CND PIC/ PIC NDT Inspector Date : Nom/ Name : Certifié / Certified :

12/15/2016 Naim Arfa ASNT MT II

Vérifié par/ Checked by Date : 15/12/2016 Nom/ Name : Brahim Drira Fonction/ Function : Technical Manager

Client Date : Nom/ Name :

Visa :

Visa :

"NB: Ce document est la prorieté de la societé PIC

Visa : ELAin Road Km 4- RAWDHAN building 4 th Floor 3052 Sfax-Tunisia Phone: +216 74 618 677/ Fax : +216 74 610 644 il est interdit de communiquer dans des tierces parties sans autorisation ecrite " E-mail: [email protected]

LOAD TEST REPORT Référence du Projet/Project Reference : IE0164 Client:

INAP

Date:

Maître d'œuvre/Owner:

WDI

12/15/2016

Lieu/Location : INAP WORKSHOP

REPORT N° :

124/B3/17

REFERENCES CLIENT / CUSTOMER REFERENCES Nom de la Sté / Company name :

INAP

Adresse / Address:

GABES ROAD 9,5 KM 3003 SFAX

Lieu de la visite / Place of visit :

INAP WORKSHOP IDENTIFICATION

Description :

Vigil Camp - Office / 1 Man sleeper

Serial N°:

814-201

Size:

Capacity:

Proof Load Test

Length:

12,14 m

Tare Weight:

4300 Kg

Width:

02,44 m

Safe Working Load:

/

Height:

02,55 m

Grosse Weight:

4300 Kg

Number of examinated lifting points:

Tested With 1 x Grosse Weight

ACCEPTANCE :

4

Conform

Not Conform

SCHEMA/ SKETCH

New data plate fitted on this equipement

Date of Inspection: 15/12/2016 Suitable for Service

Date of Next Inspection14/12/2017 :

Yes

Code Couleur / Color Code:

NA

STANDARDS This report complies with: The provision and use of work equipement regulations 1998 The supply of machinery (Safety) regulations 1992 BS EN 12079:2006 offshore containers and associated lifting sets

CONCLUSION A visual examination for general condition and a mangnetic particle inspection was carried out on the lifting point welds of the above mentioned itemt. See attached MPI Report N°: IE 0164/MT/102 No cracks or defects indication were noted at the time of inspection. The undersigned, PIC Inspector, here by certify that the here above mentioned item was thoroughly examined, and the above particulars are correct. It's to further certify that this lifting equipement complies in all respect with the oppropriate provisions and is free from defects affecting safety. In the case of any modification of the equipement which has not been agreed upon with us in writing, this becomes invalid. Examination of lifting equipement only-this does not include accessories or vehicle on which it is mounted. L'Inspecteur PIC/ PIC Inspector

Vérifié par/ Checked by

Client

Date :

12/15/2016

Date :

12/15/2016

Date :

Nom/ Name :

Naim Arfa

Nom/ Name :

Brahim Drira

Nom/ Name :

Certifié/ Certified :

Lifting Inspector

Fonction/ Function :

Technical Manager

Visa :

Visa :

Visa :

LOAD TEST REPORT Référence du Projet/Project Reference : IE0164 Client:

INAP

Date:

Maître d'œuvre/Owner:

WDI

12/15/2016

Lieu/Location : INAP WORKSHOP

REPORT N° :

124/B3/17

REFERENCES CLIENT / CUSTOMER REFERENCES Nom de la Sté / Company name :

INAP

Adresse / Address:

GABES ROAD 9,5 KM 3003 SFAX

Lieu de la visite / Place of visit :

INAP WORKSHOP IDENTIFICATION

Description :

Vigil Camp - Office / 1 Man sleeper

Serial N°:

814-201

Size:

Capacity:

Proof Load Test

Length:

12,14 m

Tare Weight:

4300 Kg

Width:

02,44 m

Safe Working Load:

/

Height:

02,55 m

Grosse Weight:

4300 Kg

Number of examinated lifting points:

4

Tested With 1 x Grosse Weight

ACCEPTANCE :

Conform

Not Conform

SCHEMA/ SKETCH

New data plate fitted on this equipement

Date of Inspection: 15/12/2016 Suitable for Service

Yes

Date of Next Inspection14/12/2017 : Code Couleur / Color Code:

NA

STANDARDS This report complies with: The provision and use of work equipement regulations 1998 The supply of machinery (Safety) regulations 1992 BS EN 12079:2006 offshore containers and associated lifting sets

CONCLUSION A visual examination for general condition and a mangnetic particle inspection was carried out on the lifting point welds of the above mentioned itemt. See attached MPI Report N°: IE 0164/MT/102 No cracks or defects indication were noted at the time of inspection. The undersigned, PIC Inspector, here by certify that the here above mentioned item was thoroughly examined, and the above particulars are correct. It's to further certify that this lifting equipement complies in all respect with the oppropriate provisions and is free from defects affecting safety. In the case of any modification of the equipement which has not been agreed upon with us in writing, this becomes invalid. Examination of lifting equipement only-this does not include accessories or vehicle on which it is mounted.

"NB:

ELAin Road Km 4- RAWDHAN building 4 th Floor 3052 Sfax-Tunisia Phone: +216 74 610 780/ Fax : +216 74 618 677 Ce document est la prorieté de la societé PIC ilE-mail: est interdit de communiquer dans des tierces parties sans autorisation ecrite " [email protected]