Camion Porte Voitures [PDF]

Zitiervorschau

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

Truck and Trailer 6” high x 4-1/8” wide x 28-3/4” long

SUPER HAULER

CAR CARRIER

Automobiles 2-1/4” high x 2-3/8” wide x 7-7/16” long

FULL-SIZE WOOD TOY PLAN SET John W. Lewman Cynthia A. Lewman

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER

Natural wood toys are made from soft or hardwoods of your choice. The finish is the make-it-yourself Non-Toxic Paste Wax formula created by Cynthia. You can watch her make up a batch with complete instructional how-to’s. Visit the How-To section at our website at toymakingplans.com.

2

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

Warning: Read before copying.

SUPER HAULER

The unauthorized reproduction or distribution of this copyrighted work is illegal. Criminal copyright infringement including infringement without monetary gain, is investigated by the FBI and is punishable by up to 5 years in federal prison and a fine of $250,000.

The plans and patterns in this planset can be photo-copied for your personal use when building the toys. ToymakingPlans.com plans and patterns are copyrighted and cannot legally be copied, distributed or shared with anyone for any other purpose. Make as many of each toy as you like! The wood toys in this plan set are royalty-free. You have the right to build any quantity of these toys for any reason. ToymakingPlans.com is dedicated to providing you with the information and ideas you need to develop your skills as a toymaker. We welcome your comments and any suggestions about this collection of toy plans. Email: [email protected]

CAR CARRIER

Cab doors slide open. Cab top flips up to reveal secret storage.

FULL-SIZE WOOD TOY PLAN SET Car Carrier Photo Pictorials................................................ 4-9 Car Carrier Truck Patterns Index and How-To’s............. 10-15

©2014 ToymakingPlans.com - All rights reserved - 042414 Note to the Readers: Due to different conditions, tools, and individual skills, ToymakingPlans.com assumes no responsibility for any damages, injuries suffered, or losses incurred as a result of following the information published in this plan set. Before beginning any project review instructions carefully. If any doubts or questions remain consult local experts or authorities. Copyright Information: Plans and patterns in this Plan Set can be photo-copied for personal use when building the toys. ToymakingPlans. com plans and patterns are copyrighted and cannot be distributed or shared for free or for any other reason.

Car Carrier Truck Precision Line Patterns...................... 16-20 Car Carrier Trailer Patterns Index and How-To’s............ 24-31 Car Carrier Trailer Precision Line Patterns..................... 32-37 Car Carrier Automobile Patterns Index and How-To’s.... 38-41 Car Carrier Automobile Precision Line Patterns............. 42-45 Gift and Shows Cartoning Information and Label........... 46-47 Printable Gallery Photos................................................. 48-51

ToymakingPlans.com © 2014

3

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER Painted toys are built from MDF or fine-grained hardwoods for the smoothest finish. Finish is spray can Krylon or Rust-Oleum white primer and color glosses. Krylon brush-on Color Creations also works well. With both types of paint, apply 2 coats of primer sanding each coat with 220 sandpaper when dry. Apply 3 coats of color sanding with 400 sandpaper when dry. Apply final coat of Krylon Triple Thick Clear. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry.

To view page 4-5 as a two-page spread in Adobe Reader: 1. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View

Scroll Saw Magic

4

STOCK CAR RACE TEAM ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER

Natural wood toys are made from soft or hardwoods of your choice. The finish is the makeit-yourself Non-Toxic Paste Wax formula created by Cynthia. You can watch her make up a batch with complete instructional how-to’s. Visit the How-To section at our website at toymakingplans.com.

To view page 4-5 as a two-page spread in Adobe Reader: 1. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View ToymakingPlans.com © 2014

5

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER

6

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER

ToymakingPlans.com © 2014

7

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER

8

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER

ToymakingPlans.com © 2014

9

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER TRUCK

PAGE 16

4

PAGE 17

3

CAR CARRIER TRUCK

2 1

1

PAGE 18

PAGE 19 14

6 8

7

5

9

11 13

15

16

10 18 17 20 12

19

PAGE 20

23 22

24

10

3

2

FULL SIZE PATTERNS PAGES 16-20

1. 1/4” x 5-3/16” x 10-1/4” make 2 2. 1/8” x 1-3/4” x 2-5/16” make 2 3. 1/2” x 2” x 6-3/16” make 2 4. 1/2” x 1-3/8” x 4-1/16” make 2 5. 1/4” x 2-1/8” x 2-1/4” make 1 6. 1/8” diameter x 1” make 2 7. 1/8” x 1-8” x 1-1/2” make 2 8. 1/2” x 2-1/8” x 3-3/8” make 1 9. 1/8” x 1/4” x 3-1/4” make 2 10. 1/8” x 1/8” x 3-1/4” make 4 11. 3/4” x 13/16” x 3-11/16” make 1 12. 1/4” x 2-1/8” x 9-1/4” make 1 13. 1/4” x 15/16” x 2-1/8” make 1 14. 1/8” diameter x 3/8” make 10 15. 1/4” x 2-1/8” x 2-3/4” make 1 16. 1/4” x 3/4” x 2-1/8” make 1 17. 1/4” x 2-1/8” x 2-13/16” make 1 18. 1/4” x 1-1/2” x 1-3/4” make 1 19. 1/2” x 3/4” x 1-3/4” make 1 20. 3/4” diameter x 1/8” buy or make 1 21. 1/8” x 1/2” x 2-1/8” make 3 22. 1/4” diameter x 4” make 2 23. 1-1/2” diameter x 1/2” buy 6 2 4. 1/4” diameter x 3-1/2” make 3

4

ToymakingPlans.com © 2014

Part 23 Wheels can be purchased at www.craftparts.com Part #TWT150 1-1/2” dia. x 1/2” 1/4” axle hole Part 20 Steering Wheel can be purchased at www.craftparts.com Part #JC5712

21

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRUCK

SUPER HAULER

4

CAR CARRIER TRUCK

22 7 6

23

5 14

3 6

9 23

17

7

8

13

14

1

20

24

1

4

10 2

9

10

15

18 16

Part 23 Wheels can be purchased at www.craftparts.com Part #TWT150 1-1/2” dia. x 1/2” 1/4” axle hole Part 20 Steering Wheel can be purchased at www.craftparts.com Part #JC5712

19 10

12 2

21 24

11

23

3

23

ToymakingPlans.com © 2014

11

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRUCK

SUPER HAULER

CAR CARRIER TRUCK

14

22

5

17

7

9 10

6

1 13 18 14

4 20

8

16

21

4

24 23 2

12

15

10 3

19

12

23

ToymakingPlans.com © 2014

24

1

11

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRUCK

0 printer scale

1

2

SUPER HAULER

CAR CARRIER TRUCK

3

ACTUAL SIZE

ATTENTION:

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

Truck Side Plan View

THE FULL SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE. INDIVIDUAL PATTERNS FOR THE TRUCK ARE ON PAGES 16-20.

1 6

22

5 14

7

10 14

9

13

10

9 17

2

15

16

20

18 8 19

21

4

10

12 11

24

24

24

3

1 23

ToymakingPlans.com © 2014

23

23

13

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRUCK

SUPER HAULER

CAR CARRIER TRUCK

9

9

13 15

17 18

8

2

2

7

7

20

10

10

19

16

1

12

1

10

1. Refer to precision Reference Views on pages 12-13 and glue-clamp Part 17 to Part 8. Glue two Part 10’s to Part 12 at 2-5/8” from front edge and 5/32” in from outside edges. Glue Part 20 to Part 16 centered on Part 16 and flush with left side. Glue Part 18 to Part 19. Let sub-assemblies glue dry.

2. Refer to precision Reference Views on pages 12-13 and glue Parts 7 and the two remaining Part 10’s to the two Part 1’s. Glue the two Part 9’s to the Part 10’s. The top edges of Part 9 and Part 10 are flush. Use the sliding door as a guide to check clearance between Part 2 doors and Part 9 guides. Do not glue Part 2 doors. Doors slide to open. Let glue dry. 14

1

21

Step 3 Assembly

Step 3 Assembly 3. Refer to precision Reference Views on pages 12-13 and glue together into one assembly: Step 1 sub-assemblies Parts 8-17, 16-20, 18-19, and 10-12. Let dry then glue and clamp the two Part 1 sides to the Step 3 Assembly. Let glue dry.

14

4. Refer to precision Reference Views on pages 12-13 and glue the three Part 21’s to the Step 3 Assembly. Glue five Part 14’s to the Step 3 Assembly. Let glue dry.

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRUCK

SUPER HAULER

CAR CARRIER TRUCK

3 23

11

4

23

24

Step 5 Assembly

3

Step 4 Assembly 4

23 23

5. Refer to precision Reference Views on pages 12-13 and glue the two Part 3’s and the two Part 4’s to the Step 4 Assembly. If head-tail lights have been cut from the Part 3’s and the Part 4’s, glue the tinted, stained or painted head-tail lights into place on Part 3-4. Note: Do not paint or stain surfaces that will be glued or glue will not adhere. Glue Part 11 front bumper to Step 4 Assembly. Let dry. 14

6. Glue three Part 23 wheels to three Part 24 axles with Part 24’s protruding 1/8” from face of Part 23’s. Insert 3 assemblies into Step 5 Assembly and glue three Part 23’s to ends of three Part 24’s allowing wheels and axles to turn freely in Step 5 Assembly.

6

5

22

6

Step 6 Assembly 7. Glue five Part 14’s to Part 5. Attach flip-up top Part 5 by inserting two Part 6’s through Step 6 Assembly and into Part 5. The two Part 6’s glue into Step 6 Assembly to allow Part 5 to pivot freely. Glue two exhaust stacks Part 22 to Step 6 Assembly. Let assembly dry thoroughly before final finishing or play.

ToymakingPlans.com © 2014

15

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRUCK

SUPER HAULER

CAR CARRIER TRUCK

0 printer scale

1

2

ACTUAL SIZE

4

4. 1/2” x 1-3/8” x 4-1/16” make 2

3

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

3

1/8” hole thru

3. 1/2” x 2” x 6-3/16” make 2

2

2. 1/8” x 1-3/4” x 2-5/16” make 2 1

1. 1/4” x 5-3/16” x 10-1/4” make 2

5/16” hole thru 3 places

16

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRUCK

0 printer scale

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

1

2

SUPER HAULER

CAR CARRIER TRUCK

3

ACTUAL SIZE 4

4. 1/2” x 1-3/8” x 4-1/16” make 2

3

3. 1/2” x 2” x 6-3/16” make 2

1/8” hole thru

2

2. 1/8” x 1-3/4” x 2-5/16” make 2 1

1. 1/4” x 5-3/16” x 10-1/4” make 2

5/16” hole thru 3 places

ToymakingPlans.com © 2014

17

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRUCK

SUPER HAULER

CAR CARRIER TRUCK

0 printer scale

1

2

3

ACTUAL SIZE

6

5

8

6. 1/8” diameter x 1” make 2

1/8” hole 5/8” deep 2 places

1/4” hole thru 2 places

5/16” hole thru 11

1/8” hole thru 5 places

11

7

7. 1/8” x 1-8” x 1-1/2” make 2

45 degrees

5. 1/4” x 2-1/8” x 2-1/4” make 1

8. 1/2” x 2-1/8” x 3-3/8” make 1

9

9. 1/8” x 1/4” x 3-1/4” make 2

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

10

10. 1/8” x 1/8” x 3-1/4” make 4

12

12. 1/4” x 2-1/8” x 9-1/4” make 1

12

18

ToymakingPlans.com © 2014

11. 3/4” x 13/16” x 3-11/16” make 1

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRUCK

0 printer scale

1

2

SUPER HAULER

CAR CARRIER TRUCK

3

ACTUAL SIZE 14. 1/8” diameter x 3/8” make 10

14

13

1/8” hole thru 5 places

13. 1/4” x 15/16” x 2-1/8” make 1

16

15

15. 1/4” x 2-1/8” x 2-3/4” make 1

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

16. 1/4” x 3/4” x 2-1/8” make 1

Note: All angles are 45 degrees.

18

21 17

18. 1/4” x 1-1/2” x 1-3/4” make 1

19

17. 1/4” x 2-1/8” x 2-13/16” make 1

21

21

20

19. 1/2” x 3/4” x 1-3/4” make 1 ToymakingPlans.com © 2014

20. 3/4” diameter x 1/8” buy or make 1 Part 20. Steering Wheel can be purchased at www.craftparts.com Part #JC5712

21. 1/8” x 1/2” x 2-1/8” make 3

19

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRUCK

SUPER HAULER

CAR CARRIER TRUCK

0 printer scale

1

2

3

ACTUAL SIZE

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

23

22

23. 1-1/2” diameter x 1/2” buy 6

24

24

22. 1/4” diameter x 4” make 2

24

24. 1/4” diameter x 3-1/2” make 3

20

ToymakingPlans.com © 2014

Part 23 Wheels can be purchased at www.craftparts.com Part #TWT150 1-1/2” dia. x 1/2” 1/4” axle hole

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRUCK

SUPER HAULER

CAR CARRIER TRUCK

ToymakingPlans.com © 2014

21

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER

To view page 22-23 as a two-page spread in Adobe Reader: 1. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View

22

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER

To view page 22-23 as a two-page spread in Adobe Reader: 1. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View ToymakingPlans.com © 2014

23

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRAILER

CAR CARRIER TRAILER

FULL SIZE PATTERNS PAGES 37-45 PAGES 32-32



25

PAGES 34-35 26

25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37.

1/4” x 5-3/4” x 20-1/8” 1/4” x 2-1/2” x 15-1/2” 1/4” x 2-1/2” x 15-3/8” 1/2” x 1-7/8” x 8” 1/4” x 2-1/2” x 3-1/2” 1/2” x 2-1/2” x 3-9/16” 1/4” x 1-7/8” x 2-1/2” 1/4” diameter x 1” 1/8” x 2-7/16” x 6” 1/4” x 2” x 2-7/16” 1/4” diameter x 3-3/4” 1/8” diameter x 1” 1-1/2” diameter x 1/2”

make 2 make 1 make 1 make 2 make 1 make 1 make 1 make 1 make 1 make 1 make 2 make 2 buy 4

27

PAGE 36

37

PAGE 37 28

32

34

33 35 29

24

30

PAGES 26-27

31

33

36 34

ToymakingPlans.com © 2014

PAGES 28-39

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRAILER

SUPER HAULER

CAR CARRIER TRAILER 26

29 25

37

28 32 30

31

36

25

28

37

Part 38 Wheels can be purchased at www.craftparts.com Part #TWT150 1-1/2” dia. x 1/2” 1/4” axle hole

34 35

27

35

33

37 36

ToymakingPlans.com © 2014

25

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRAILER

SUPER HAULER

CAR CARRIER TRAILER

0 printer scale

1

2

3

ACTUAL SIZE

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

25

ATTENTION: THE FULL SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE. INDIVIDUAL PATTERNS FOR THE TRAILER ARE ON PAGES 32-37.

26

33

Trailer Side Plan View

28 34

27 36

35

26

37

35

37

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRAILER

0 printer scale

1

2

3

ACTUAL SIZE

SUPER HAULER

CAR CARRIER TRAILER

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

25

29

26

Trailer Side Plan View 30

31

ATTENTION:

32

THE FULL SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE.

27

INDIVIDUAL PATTERNS FOR THE TRAILER ARE ON PAGES 32-37. ToymakingPlans.com © 2014

27

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRAILER

SUPER HAULER

CAR CARRIER TRAILER

0 printer scale

1

2

3

ACTUAL SIZE

ATTENTION: THE FULL SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE.

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

INDIVIDUAL PATTERNS FOR THE TRAILER ARE ON PAGES 32-37.

28 35

35

25

36

33

34

36

26

36

27

Trailer Top Plan View 36

25 35

35 28

28

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRAILER

0 printer scale

1

2

SUPER HAULER

CAR CARRIER TRAILER

3

ACTUAL SIZE

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

25

30

26

31

27

29

32

Trailer Top Plan View 25

ATTENTION: THE FULL SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE. INDIVIDUAL PATTERNS FOR THE TRAILER ARE ON PAGES 32-37.

ToymakingPlans.com © 2014

29

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRAILER

SUPER HAULER

CAR CARRIER TRAILER

26

25

29

27

30 31

25

Step 1 Assembly

1. Refer to precision Plan Views on pages 26-29 then clamp and glue Parts 26, 27, 29, 30 and 31 to Part 25. Let the assembly dry thoroughly before proceeding.

2. Clamp and glue the remaining Part 25 to the Step 1 Assembly. Let the assembly dry thoroughly before proceeding to the next step.

NOTE:

37 33

33

34

34 35

37

3. Glue two Part 37 wheels to two Part 35 axles with Part 35’s protruding 1/8” from face of Part 37’s. Insert the 2 assemblies into Step 2 Assembly and glue the remaining two Part 37’s to ends of two Part 35’s allowing wheels and axles to turn freely in the Step 2 Assembly.

30

Step 4 Assembly

Step 2 Assembly

4. Glue and clamp Part 34 to Part 33 before drilling the 1/8” diameter x 3/4” deep tailgate pivot holes in the Part 33/34 assembly. Let the assembly dry thoroughly before proceeding.

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER TRAILER

Step 4 Assembly

28

32

36

Step 3 Assembly

28 36

5. Attach the Step 4 Assembly by inserting the two Part 36’s through the Step 3 Assembly and into the Step 4 Assembly. Glue the two Part 36’s to the Step 3 Assembly allowing the Step 4 Assembly to swing freely on the two Part 36’s.

TRAILER

Step 5 Assembly 6. Refer to precision Plan Views on pages 26-29 then clamp and glue two Part 28’s to the Step 5 Assembly. Glue Part 32 in place in the Step 5 Assembly. Let the assembly dry completely before adding finishes.

ToymakingPlans.com © 2014

31

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER TRAILER

0 printer scale

1

2

3

ACTUAL SIZE

25

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

25. 1/4” x 5-3/4” x 20-1/8” make 2 1/8” hole thru 5/16” hole thru 2 places

32

ToymakingPlans.com © 2014

MAKE 2 OF THIS PART

TRAILER

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRAILER

ACTUAL SIZE

0 printer scale

1

2

3

SUPER HAULER

CAR CARRIER TRAILER

25

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

ToymakingPlans.com © 2014

33

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRAILER

SUPER HAULER

CAR CARRIER TRAILER

26

26. 1/4” x 2-1/2” x 15-1/2” make 1

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

34

27

27. 1/4” x 2-1/2” x 15-3/8” make 1

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRAILER

SUPER HAULER

CAR CARRIER TRAILER

26

27

ToymakingPlans.com © 2014

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

35

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRAILER

SUPER HAULER

CAR CARRIER TRAILER

32. 1/4” dia. x 1” make 1

32

MAKE 2 OF THIS PART

28

28. 1/2” x 1-7/8” x 8” make 2

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

29

29. 1/4” x 2-1/2” x 3-1/2” make 1

36

1/4” hole thru 30

30. 1/2” x 2-1/2” x 3-9/16” make 1

ToymakingPlans.com © 2014

31

31. 1/4” x 1-7/8” x 2-1/2” make 1

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

TRAILER

SUPER HAULER

CAR CARRIER TRAILER Part 37 Wheels can be purchased at www.craftparts.com Part #TWT150 1-1/2” dia. x 1/2” 1/4” axle hole

IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

33

34

MAKE 2 OF THIS PART 36

35

36. 1/8” dia. x 1” make 2 33

PART 33/34 ASSEMBLY

BUY 4 OF THIS PART

34. 1/4” x 2” x 2-7/16” make 1

33

MAKE 2 OF THIS PART

37

34

33. 1/8” x 2-7/16” x 6” make 1

35. 1/4” diameter x 3-3/4” make 2

37. 1-1/2” dia. x 1/2” buy 4

34

ToymakingPlans.com © 2014

NOTE: Glue and clamp Part 34 to Part 33 before drilling the 1/8” diameter x 3/4” deep tailgate pivot holes in the Part 33/34 assembly. 37

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

AUTOMOBILE

CAR CARRIER AUTOMOBILE

38. 39. 40. 41.

AUTOMOBILE

FULL SIZE PATTERNS FOR 2 CARS PAGES 42-45

1/4” diameter x 2-3/8” make 4 1-1/4” diameter x 1/2” buy 8 5/16” x 1” x 1-5/8” make 4 3/4” diameter x 1/8” buy or make 2

42. 1/4” x 2-1/8” x 7-3/8” 43. 5/8” x 1-7/8” x 7-7/16” 44. 1/4” x 1-7/8” x 7-7/16”

make 4 make 4 make 4

PAGE 46-47

40

42

42 38

40 43

43 38

41

39 44

44

42

42

PAGE 48-49

40

38 40 43

43

38

41

39 44

38

Part 41 Steering Wheel can be purchased at www.craftparts.com Part #JC5712

44

ToymakingPlans.com © 2014

Part 39 Wheels can be purchased at www.craftparts.com Part #TWT125 1-1/4” dia. x 1/2” 1/4” axle hole

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

AUTOMOBILE

SUPER HAULER

CAR CARRIER AUTOMOBILE

42

40 40

43 43

39

44

42

41 38 38

39

44

39 43

42 43

39

44

ToymakingPlans.com © 2014

Part 41 Steering Wheel can be purchased at www.craftparts.com Part #JC5712

Part 39 Wheels can be purchased at www.craftparts.com Part #TWT125 1-1/4” dia. x 1/2” 1/4” axle hole

39

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

AUTOMOBILE

SUPER HAULER

CAR CARRIER AUTOMOBILE

43

40

44

41

Step 1 Assembly

43

44

1. Using the Side Plan View on page 41 as a guide glue-clamp Parts 43 aligning all edges. Let dry before proceeding. 42 42

Step 2 Assembly

2. Using the Side Plan View on page 41 as a guide glue-clamp two Part 40’s together. Glue-clamp the two Part 44’s to the Step 1 Assembly aligning edges. Using the Side Plan View on page 41 as a guide glue Part 41 to assembly on left side. Let assembly dry before proceeding. 42 38

42

39

38

40

Note: Do not paint or stain surfaces that will be glued or glue will not adhere.

42 42

3. Using the Side Plan View on page 41 as a guide glue two Part 42’s to Step 2 Assembly. If head-tail lights have been cut from the Part 42’s, glue the tinted, stained or painted head-tail lights into place on the Part 42’s. Glue the Parts 40-40 assembly in place. Let the assembly dry before proceeding to the next step.

40

39

Step 3 Assembly

5. Insert two Part 38 axles into holes in Step 3 Assembly. Glue the four Part 39 wheels to the two axle ends at a point that allows the axles to rotate freely within the Step 3 Assembly axle holes.

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

AUTOMOBILE

SUPER HAULER

CAR CARRIER AUTOMOBILE

40 42

44

43

42

42

41

43

43 38

38

42 43 39

Automobile Side Plan View

39

For a natural finish apply Cynthia’s Paste Wax formula*. As an alternate, brush or spray with 3 to 5 coats of clear polyurethane semi-gloss. Sand each coat but the last coat when dry with 220 grit sandpaper to achieve a suede-smooth finish. *For How-To video visit toymakingplans.com ToymakingPlans.com © 2014

41

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER AUTOMOBILE

AUTOMOBILE

0 printer scale

1

2

ACTUAL SIZE

40. 5/16” x 1” x 1-5/8” make 2 42

40

42. 1/4” x 2-1/8” x 7-3/8” make 2

40 42

40 43

43. 5/8” x 1-7/8” x 7-7/16” make 2 40

5/16” hole thru 2 places

41

43

NOTE: Make the 5/8” thickness by cutting down 3/4” thick stock on your table saw. Optional: Make Part 43 using 1/2” thick wood and Roof Panels Part 40 are cut 3/4” wide.

41. 3/4” diameter x 1/8” buy or make 1 Part 41 Steering Wheel can be purchased at www.craftparts.com Part #JC5712 IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

42

44

44. 1/4” x 1-7/8” x 7-7/16” make 2 44

ToymakingPlans.com © 2014

3

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

39. 1-1/4” dia. x 1/2” buy 4

0 printer scale

1

2

ACTUAL SIZE

AUTOMOBILE

3

SUPER HAULER

CAR CARRIER AUTOMOBILE

42

38. 1/4” dia. x 2-3/8” make 2

42. 1/4” x 2-1/8” x 7-3/8” make 2

42

39

43

43. 5/8” x 1-7/8” x 7-7/16” make 2 5/16” hole thru 2 places

43

NOTE: Make the 5/8” thickness by cutting down 3/4” thick stock on your table saw. Optional: Make Part 43 using 1/2” thick wood and Roof Panels Part 40 are cut 3/4” wide.

39

38

Part 39 Wheels can be purchased at www.craftparts.com Part #TWT125 1-1/4” dia. x 1/2” w/ 1/4” axle hole

44

44. 1/4” x 1-7/8” x 7-7/16” make 2

44

ToymakingPlans.com © 2014

43

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

AUTOMOBILE

SUPER HAULER

CAR CARRIER AUTOMOBILE

0 printer scale

1

2

ACTUAL SIZE

40. 5/16” x 1” x 1-5/8” make 2 42

40

42. 1/4” x 2-1/8” x 7-3/8” make 2

40 42

40 43

43. 5/8” x 1-7/8” x 7-7/16” make 2 40

5/16” hole thru 2 places

41

43

NOTE: Make the 5/8” thickness by cutting down 3/4” thick stock on your table saw. Optional: Make Part 43 using 1/2” thick wood and Roof Panels Part 40 are cut 3/4” wide.

41. 3/4” diameter x 1/8” buy or make 1 Part 41 Steering Wheel can be purchased at www.craftparts.com Part #JC5712 IMPORTANT NOTE: To print out enough paper patterns for the plan set from your computer printer print only the precision line patterns you need for each project. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring printer scale on each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

44

44

44. 1/4” x 1-7/8” x 7-7/16” make 2 44

ToymakingPlans.com © 2014

3

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

AUTOMOBILE

0 printer scale

39. 1-1/4” dia. x 1/2” buy 4

1

2

ACTUAL SIZE

CAR CARRIER AUTOMOBILE

3

42

38. 1/4” dia. x 2-3/8” make 2

42. 1/4” x 2-1/8” x 7-3/8” make 2

42

39

43

43. 5/8” x 1-7/8” x 7-7/16” make 2 5/16” hole thru 2 places

43

NOTE: Make the 5/8” thickness by cutting down 3/4” thick stock on your table saw. Optional: Make Part 43 using 1/2” thick wood and Roof Panels Part 40 are cut 3/4” wide.

39

38

Part 39 Wheels can be purchased at www.craftparts.com Part #TWT125 1-1/4” dia. x 1/2” w/ 1/4” axle hole

44

44. 1/4” x 1-7/8” x 7-7/16” make 2

44

ToymakingPlans.com © 2014

45

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER

Display your Super Hauler Car Carrier play sets in labeled gift boxes at your next crafts show.

Add a pro-touch to your wood toy masterpieces with a labeled and signatured gift box. The Super Hauler Car Carrier play set fits comfortably in this off-the-shelf corrugate carton available at www.uline.com. It’s easy to order online and in quantities as small as 20 cartons. The cartons are delivered to your door in 3 to 5 days. The Box order number is S-18377 30” x 8” x 8”. Shipping is extra. Order at www.uline.com. 46

ToymakingPlans.com © 2014

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

SUPER HAULER

CAR CARRIER

CAR CARRIER

ER P U S LER U HA

HANDCRAFTED WOOD TOY Toymaker

ToymakingPlans.com © 2014

47

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M

Buyer: jean francois le bras ([email protected]) Transaction ID: 62L31091UL056300M