31 0 1MB
COUPLINGS VLBG - Plain Bearing Load Ring
P
N
Lifting & Lashing Points For Bolting R E CISI
O
MATERIAL: •Body: EN1677 Grade 8, surface pink powder coated INFLUENCE OF TEMPERATURE When using the VLBG in over heated areas, the WLL has to be reduced as follows, based upon the strength of the bolts: 100° up 200° - 15% - (212°F to 392°F) 200° up 250° - 20% - (392°F to 482°F) 250° up 350° - 25% - (482°F to 662°F) Temperatures exceeding 350°C (662°F) are not recommended Standard Type
B C
F
SW N
R E T
A
D
G L H M
J
K
DB
WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales). Part Number Ringbolt Ringbolt WLL Standard Long (t) 0.30 VLBG-M8 VLBG-M8/LONG 0.63 VLBG-M10 VLBG-M10/LONG 1.00 VLBG-M12 VLBG-M12/LONG 1.50 VLBG-M16 VLBG-M16/LONG 2.50 VLBG-M20 VLBG-M20/LONG 4.00 VLBG-M24 VLBG-M24/LONG 4.00 VLBG-M27 5.00 VLBG-M30 VLBG-M30/LONG 7.00 VLBG-7T-M36* 8.00 VLBG-8T-M36 VLBG-8T-M36/LONG VLBG-10T-M42 VLBG-10T-M42/LONG 10.00 VLBG-15T-M42 VLBG-15T-M42/LONG 15.00 20.00 VLBG-M48 VLBG-M48/LONG
All dimensions are in mm A 30 30 32 33 50 50 60 60 60 77 75 95 95
B 54 54 54 56 82 82 103 103 103 122 145 156 156
C 34 34 34 36 54 54 65 65 65 82 80 100 100
D 35 36 37 46 55 58 78 80 72 100 103 113 117
E 40 39 38 39 55 66 69 67 74 97 64 110 105
F 10.00 10.00 10.00 13.50 16.50 18.00 22.50 22.50 22.50 26.50 30x20 36.00 36.00
G 29 29 29 36 43 43 61 61 55 77 77 87 87
H Std. 11 16 21 24 32 37 39 49 52 63 73 63 73
H Long 76 96 116 149 187 222 279 223 273 263 303
* Special design, bolt cannot be removed. FEATURES AND RECOMMENDATIONS •Will turn 360° •Adjustable in pull direction •Load ring foldable •Full WLL in any load direction •Surface pink powder coated •Only use bolts recommended by manufacturer
•100% crack detected •Outer and inner hexhead bolt for universal tool use •Surface protection: CORRUD-DT-min. 20 x better corrosion protection than zinc plated (except spot face after cutting to a special length). •Thread over whole bolting length “H”
+44 (0)1246 261300 +44 (0)1246 261688
COUPLINGS Lifting & Lashing Points For Bolting
Plain Bearing Load Ring - VLBG
N
P
R E CISI
O
Standard Length
Long Length
L max. H max.
90°
90°
All dimensions are in mm J 75 75 75 87 113 130 151 151 151 205 170 230 230
K 45 45 45 47 64 78 80 80 80 110 80 130 130
L Std. 40 45 50 60 75 80 100 110 107 140 150 150 160
L Long 105 125 145 185 230 265 340 300 350 350 390
M 8 10 12 16 20 24 27 30 36 36 42 42 48
N 5 6 8 10 12 14 17 22 24 24 27
SW 13 17 19 24 30 36 41 46 55 55 65 65 75
R 32 32 32 38 48 48 67 67 67 85 85 100 100
T 75 75 75 85 110 125 147 147 146 197 162 222 222
DB 24 24 26 30 45 45 60 60 60 70 70 85 85
Weight kg 0.30 0.32 0.33 0.55 1.30 1.50 3.10 3.10 3.30 5.80 6.40 11.20 11.20
Torque Nm 30 60 100 150 250 400 400 500 700 800 1000 1500 2000
Price 1 off Ringbolt Ringbolt Standard Long £52.54 £62.69 £52.83 £62.92 £53.20 £63.53 £60.37 £60.37 £61.01 £74.11 £65.89 £80.15 £98.30 £121.56 £145.63 £122.81 £232.12 £282.21 £245.54 £307.91 £292.80 £356.07 £316.11 £384.36
FEATURES AND RECOMMENDATIONS (CONT.) •Bolt is held captive in body and should only be •Load ring has to be adjusted in pull direction, free replaced with the same quality class bolt to move and must not support on edges •Clear identification at the bolt head with thread size •The lifting attachment must be free to move when and quality class attached to the load ring •Provide plain bolting surface. The bolted ring must •Regular inspections should always be carried out be free to turn 360° by qualified personnel
[email protected] www.rino.co.uk
COUPLINGS VRSF - Plain Bearing Eye Bolts
P
MATERIAL: •Body: •Screw:
N
Lifting & Lashing Points For Bolting R E CISI
O
Forged, 1.6541, alloy quenched and tempered, 100% electro-magnetic crack detection acc. to EN 1677-1. Grade 10.9
K C
D B F
N
F
A
L S
M
G
E
WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales). All dimensions are in mm Part Number VRSF-M8 VRSF-M10 VRSF-M12 VRSF-M16 VRSF-M20 VRSF-M24 VRSF-M30 VRSF-M36 VRSF-M42 VRSF-M48
WLL Weight (t) kg A 34 0.40 0.1 34 0.40 0.1 42 0.75 0.2 49 1.50 0.3 57 2.30 0.5 69 3.20 0.9 86 4.50 1.7 7.00 2.9 103 9.00 4.6 120 12.00 7.0 137
B 11 11 13 15 17 21 26 32 38 43
C 8.5 8.5 10.0 14.0 16.0 19.0 24.0 29.0 34.0 38.0
D 25 25 30 35 40 48 60 72 82 94
FEATURES AND RECOMMENDATIONS •Design factor 4:1 in any direction •Workpiece material must conform to minimum quality std. St 37 •Countersink of tapped hole = nominal thread diameter
E 25 25 30 35 40 48 60 75 85 100
G 28 28 34 40 50 60 75 90 105 120
K 47 47 56 65 75 90 112 135 158 180
L 12 15 18 24 30 36 45 54 63 72
M 8 10 12 16 20 24 30 36 42 48
N 6 6 8 10 12 14 17 22 24 27
S 16.0 15.0 18.0 22.0 27.5 33.0 41.5 49.5 58.0 66.0
Price 1 off £22.15 £23.81 £29.90 £35.25 £50.07 £64.19 £91.15 £135.24 £189.24 £222.04
•Provide plain seat of the special hexagon bolt •VRSF must be able to rotate by 360° in bolted condition •Specifically engineered Grade 10.9 captive hexagon socket screw
+44 (0)1246 261300 +44 (0)1246 261688
COUPLINGS Lifting & Lashing Points For Bolting
Plain Bearing Eye Bolts - VRSF
N
P
R E CISI
O
Comparison Example: Eye bolt DIN 580-M20 1200kg
Starpoint VRSF-M20 6000kg 90° 2300kg 2300kg
M20
M20
Important Lateral forces with standard eye bolts acc. to DIN580 are forbidden. In case of multiple leg suspensions 2leg and 3⁄4-leg the ring plane of the eye bolt eyes must be the direction of pull. This cannot be guaranteed when standard eye bolts are tightened. This is only possible with the Starpoint eye bolt, because it can be adjusted in pull direction in the tightened position. Fitting and Adjusting the VRSF Starpoint:
VRSF Fixed Shape: Colour: Marking:
VRSF Adjustable
Star shaped – clear distinction from standard eye bolt DIN 580 Fluorescent pink powder coating Clear indication of WLL (in metric tons and lbs) for side load direction F (not allowed with standard eye bolt).
Type VRSF includes the locking device/Star key. The Starpoint is delivered with an intergrated installation tool. The tool should be engaged into the hexagon socket screw and tightened by the hand-disengage tool. The Starpoint is then adjustable 360°.
[email protected] www.rino.co.uk
COUPLINGS PP-S - PowerPoint Star
P
MATERIAL: •Body:
N
Lifting & Lashing Points For Bolting R E CISI
O
EN1677 Grade 8
WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales). A
B
C
E
G
H
F M
SW
D
All dimensions are in mm B 75 97 126 150 174 208
C 18 25 30 35 40 48
D 40 46 61 78 95 100
E 116 147 187 227 267 310
F† Std. 18 25 30 36 45 54
G 41 50 61 77 93 102
H 34 40 50 62 77 84
M 12 16 20 24 30 36
SW 36 41 55 70 85 90
Price Weight 1 off kg Torque 0.4 £72.78 1.0 £91.67 1.7 £115.12 3.5 £161.80 7.2 £236.28 9.2 £373.90 Hand tight with spanner
Part WLL Number (t) A 13 PP-S-M12 0.63 20 PP-S-M16 1.50 28 PP-S-M20 2.50 36 PP-S-M24 4.00 37 PP-S-M30 5.00 49 PP-S-M36 8.00 † Longer thread lengths
are available upon request.
FEATURES AND RECOMMENDATIONS •All parts are either 100% crack detected or proof loaded according to EN 1677 •All original bolts are 100% crack detected •Design factor 4:1 in any direction •With double ball bearings, for tilting, twisting and turning without jerks •Suitable for all sling systems, either hook, eye or loop •Non-protruding hook tip •Forged safety latch, engages in the tip of the hook therefore protected against lateral bending •Coiled double leg corrosion protected spring
•Thickened tip of the hook prevents handling, malpractices, and resists bending •Wearing edges on both sides and gauges for checking hook openings •Will turn 360° •180° pivoting •Available to purchase as separate components. See "Separate components" page for further details
+44 (0)1246 261300 +44 (0)1246 261688
COUPLINGS Lifting & Lashing Points For Bolting
PowerPoint Ring Connection - PP-B
N
P
R E CISI
O
MATERIAL: •Body:
EN1677 Grade 8
WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales). C
A
B E G F M
SW
D
All dimensions are in mm Part Number PP-B-M12 PP-B-M16 PP-B-M20 PP-B-M24 PP-B-M30 PP-B-M36
WLL (t) 0.63 1.50 2.50 4.00 5.00 8.00
A 9 11 13 16 21 24
B 65 65 75 95 130 140
C 35 35 40 45 60 65
D 40 46 61 78 95 100
E 105 115 135 172 223 242
F 18 24 30 36 45 54
G 41 50 61 78 93 102
M 12 16 20 24 30 36
SW 36 41 55 70 85 90
Weight kg 0.35 0.60 1.10 2.40 5.20 6.30
FEATURES AND RECOMMENDATIONS •All parts are either 100% crack detected or proof loaded according to EN 1677 •All original bolts are 100% crack detected •Design factor 4:1 in any direction •Ring connection for hook assemblies •With double ball bearings, for tilting, twisting and turning without jerks •Suitable for all sling systems; hook, eye or loop •Will turn 360° •180° pivoting •Available to purchase as separate components. See "Separate components" page for further details
[email protected] www.rino.co.uk
Price 1 off £60.90 £65.37 £103.91 £144.83 £189.55 £294.03
COUPLINGS WPP-S - PowerPoint Universal Connection MATERIAL: •Body:
P
N
Lifting & Lashing Points For Welding
R E CISI
O
Forged, 1.0570 (St52-3) Grade 8
WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales). A
B
C
E
G D
All dimensions are in mm Part Number WPP-S-0.63T WPP-S-1.5T WPP-S-2.5T WPP-S-4T WPP-S-5T WPP-S-8T
WLL (t) 0.63 1.50 2.50 4.00 5.00 8.00
A 13 20 28 36 37 49
B 75 97 126 150 174 208
C 18 25 30 35 40 48
D 40 46 61 78 95 100
E 115 147 187 227 267 310
G 40 50 61 77 93 102
Weld 3.5 4.5 HV3+4.5 HV3+5.0 HV3+8.0 HV3+10.0
Weight kg approx. 0.4 1.0 1.5 3.3 7.1 8.2
Price 1 off £64.06 £79.31 £99.84 £138.64 £224.43 £289.69
FEATURES AND RECOMMENDATIONS •Features double ball bearing •360° swivelling •WPP-S range is the universal connection for round slings, wire ropes, hook and ring assemblies •Available to purchase as separate components. See "Separate components" page for further details
+44 (0)1246 261300 +44 (0)1246 261688
COUPLINGS Lifting & Lashing Points For Welding
PowerPoint with Double Ball Bearing - WPP-B
N
P
R E CISI
O
MATERIAL: •Body:
Forged, 1.0570 (St52-3) Grade 8
WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales). C
B
A
E G
D
All dimensions are in mm Part Number WPP-B-0.63T WPP-B-1.5T WPP-B-2.5T WPP-B-4T WPP-B-5T WPP-B-8T
WLL (t) 0.63 1.50 2.50 4.00 5.00 8.00
A 9 11 13 16 19 24
B 65 65 74 95 130 140
C 35 35 40 45 60 65
D 40 46 61 78 95 100
E 105 115 135 172 223 242
G 40 50 61 77 93 102
Weld 3.5 4.5 HV3+4.5 HV3+5.0 HV3+8.0 HV3+10.0
Weight kg approx. 0.35 0.60 1.00 2.30 4.70 5.30
FEATURES AND RECOMMENDATIONS •Features double ball bearing •360° swivelling •WPP-B range is the ring connection for hook assemblies •Available to purchase as separate components. See "Separate components" page for further details
[email protected] www.rino.co.uk
Price 1 off £53.51 £62.60 £90.35 £123.52 £180.23 £213.00
COUPLINGS LBS - Load Ring
P
N
Lifting & Lashing Points For Welding R E CISI
O
MATERIAL: •Body: •Suspension Ring:
Forged, 1.0570 (St52-3) to DIN 18800 Forged, acc. to EN1677, grade 8 Red in colour WLL = Working Load Limit Each lifting product is rated with a working load limit with a safety factor of 4 from the worst angle of lift. This means the product will break at more than 4 times the WLL (for multi leg lifts please consult sales).
180° Pivoting Locking Spring Weld Arrangement:
E C
ØF T
D
D G
A
HV
Distance Lugs
H
B
Note: All lifting points can also be used as lashing points. The permissible pull force is double the nominal WLL. Design factor for load securing is 2:1. Eg. = LBS-1T – lifting of 1t WLL, as lashing point 2000 daN permitted. Pull force, ≈ LC = lashing capacity. All dimensions are in mm Part WLL Number (t) LBS-1T 1 LBS-3T 3 LBS-5T 5 LBS-8T 8 LBS-10T 10 LBS-15T* 15
A 32 42 61 75 70 96
B 65 85 110 118 146 180
C 36 50 65 65 80 100
D 25 31 44 55 51 69
E 39 50 72 66 90 100
ØF 13.50 16.50 22.50 26.50 30x20 33x22
FEATURES AND RECOMMENDATIONS •Easy and quick to weld assembly •Compact design •High dynamic and static strength •Forged suspension ring acc. to EN 1677, grade 8, electromagnetic crack detected, painted red; meets the requirements of the appropriate safety authorities •The welding block has been forged of material 1.0570 (St 52-3) and clearly stamped with the permissible WLL. The patented distance lugs assist in achieving the correct root weld
G 33 46 60 60 70 90
H 85 108 155 168 190 230
Weld HV+ HV5+3 HV8+3 HV12+4 HV16+4 HV17+4 HV25+6
Weight kg 0.3 0.6 1.6 2.5 3.2 6.0
Price 1 off £18.77 £21.29 £45.57 £74.45 £83.41 £117.41
•Important: The special weld design (continuous HV), the requirements of DIN 18800 are fulfilled, eg: a closed weld avoids corrosion and thus suitable for outdoor use •Distinctive features for type LBS: A protected spring keeps the load ring in every required position. The parts are connected in such a way that they remain captive. *Only LBS-15T does not have this •The spring prevents unwanted noise occurring as a result of vibration
+44 (0)1246 261300 +44 (0)1246 261688
COUPLINGS P
N
Lifting & Lashing Points R E CISI
Separate Components
O
Welding PowerPoint WPP Swivel - WPP-S/SEP Part Number WPP-S-0.63T/SEP WPP-S-1.5T/SEP WPP-S-2.5T/SEP WPP-S-4.0T/SEP WPP-S-5.0T/SEP WPP-S-8.0T/SEP
Price 1 off £POA £POA £POA £POA £POA £POA
PowerPoint Threaded Bolt - PP Part Number PP-M12 PP-M16 PP-M20 PP-M24 PP-M30 PP-M36
Price 1 off £POA £POA £POA £POA £POA £POA
Cobra Eye Hook - VIP Part Number VIP-0.63T VIP-1.5T VIP-2.5T VIP-4.0T VIP-6.5T VIP-8.0T
Price 1 off £POA £POA £POA £POA £POA £POA
PowerPoint B-Link - B Part Number B-0.63T B-1.5T B-2.5T B-4.0T B-5.0T B-8.0T
Price 1 off £POA £POA £POA £POA £POA £POA
[email protected] www.rino.co.uk