26 1 1MB
Product Program
The Company Bopp & Reuther looks back at a history of over 125 years. The name Bopp & Reuther stands for innovation, competence and individually finding solutions to problems.
1872 foundation of the factory by Carl Bopp and Carl Reuther
1951 Start of the production of pressure reducing valves with auxiliary control units
1900 Bopp & Reuther supplies 60% of the world´s water gate valves
1972 Intensifying its development work in the field of measurement, dosage and control technology, Bopp & Reuther directs its products range towards the increasing demand for automation.
1932 Entering measurement technology opens the way to the development of the oval wheel meter.
1990 Arrival of the new shareholder IWKA, AG
Everywhere in the industry and the municipal supply that liquid, gaseous and vapor have to be reliably locked, controlled and safe-guarded, our valves are at work and our Know-how of process technology comes into force. In close cooperation with our customers we continuously work on optimizing our products and our delivery programme.
We use consequently the possibilities which result from new technologies and materials Modern technique combined with decades of experience and a worldwide recognized quality standard makes us consequently create solutions to problems which are just in practice and are economic for today and in future for our customers. To fulfill these ambitious tasks in future, Bopp & Reuther is guided by the following statements:
i The customer is our focus in our way of thinking and acting i Aim of our actions is he continuous improvement of quality and performance of our products and our work strategies iWe are work together as partners and are open for objective criticism iDue to contiuous innovations in products and process we keep our success of market. iWe act non-polluting and take care of our ressources
Spring Loaded Safety Valves
Assisted Safety Valves
Spring Loaded Safety Valves with Special Design for Power Stations Control Valves
Shut-off Valves Non-return Valves
Pressure Reducing Valves for the Water Industry Service
Spring Loaded Safety Valves
Spring Loaded Safety Valve Compact Design SiC 13 until 200 bar
Spring Loaded Safety Valve Compact Design SiC 14 with Bellows until 100 bar
Spring Loaded Safety Valve Si 0614 PN 10 - 400
Function
Function
Function Protecting the system against excessive pressure
hProtecting the system against excessive pressure
hProtecting the system against excessive pressure
hThermal expansion
hThermal expansion
Application Chemical plants, petrochemical plants and low pressure steam boilers
Application Chemical plants, petrochemical plants and low pressure steam boilers
Application Chemical plants, petrochemical plants and and highest pressures
Design h Construction: angle-type valve h Size: DN 15, 20 and 25 h Connections: NPT x NPT and flanges
Design h Construction: angle-type valve h Size: DN 15, 20 and 25 h Connections: NPT x NPT and flanges
h Seat-Ø: 9 / 12.2 / 17 mm h Max. set pressure: 200 bar h Characteristic: normal h Function: +10% gas/steam +10% liquids acc. to ASME VIII, +10%/-10% gas/steam +10%/-20% liquids acc. to DIN/AD/TRD h Materials: GS/WCB, CrNiMo/CF8M h Mounting position: vertical h Perm. temp. GS: -10°C until +400°C WCB: -29°C until +427°C CrNiMo: -60°C until +400°C CF8M: -268°C until +400°C h SiC 13 with closed bonnet
h Seat-Ø: 12.2 / 17 mm h Max. set pressure: 100 bar h Characteristic: normal h Function: +10% gas/steam +10% liquids acc. to ASME VIII, +10%/-10% gas/steam +10%/-20% liquids acc. to DIN/AD/TRD h Materials: GS/WCB, CrNiMo/CF8M h Mounting position: vertical h Perm. temp. GS: -10°C until +400°C WCB: -29°C until +427°C CrNiMo: -60°C until +400°C CF8M: -268°C until +400°C h SiC 14 with bellows
Design h Construction: angle-type valve h Size: DN 15 und 25 h Connections: pipe thread/NPT, flanges and Swagelock h Seat-Ø: 7/ 12.5 mm h Max. set pressure: 400 bar h Characteristic: normal h Function: +10%/-10% gas/steam +10%/-20% liquids
Approvals h ASME-Approval h TÜV-Type Test Approval
Approvals h ASME-Approval h TÜV-Type Test Approval
Approvals h TÜV-Type Test Approval
Technical Data Sheet P3100e
Technical Data Sheet P3100e
Technical Data Sheet P3101e
h Materials: CrNiMo h Mounting position: vertical h Perm. temp.: -196°C until +400°C
Spring Loaded Safety Valve Si 2501 until PN 16
Spring Loaded Safety Valve Si 2502 until PN 40
Function Protecting the system against excessive pressure
Function Protecting the system against excessive pressure
Application Chemical plants, petrochemical plants and low pressure steam, water supply
Application Chemical plants, petrochemical plants, hot water and low pressure steam, water supply
Design h Construction: angle-type valve h Size: DN 15 until 150 h Connections: flanges
Design h Construction: angle-type valve hSize: DN 15 until 25 h Connections: flanges
h Seat-Ø: 12 until 93 mm h Max. set pressure: 16 bar h Characteristic: normal h Function: +10%/-10% gas/steam +10%/-20% liquids
h Seat-Ø: 12 until 93 mm h Max. set pressure: 40 bar h Characteristic: normal h Function: +10%/-10% gas/steam +10%/-20% liquids
h Material: GG h Mounting position: vertical h Perm. temp.: -10°C until +300°C h Press fit seat bush h Discharge coefficient αw=0.25 (low lift)
h Materials: GS, CrNi, CrNiMo h Mounting position: vertical h Perm. temp.: open bonnet GS: -10°C until +400°C until 450°C CrNi: -196°C until +300°C CrNiMo: -60°C until +400°C h Press fit seat bush h Discharge coefficient αw=0.25 (low lift)
Approvals h TÜV-Type Test Approval
Approvals h TÜV-Type Test Approval
Technical Data Sheet P3102e
Technical Data Sheet P3103e
Spring Loaded Safety Valve Si 2503 until PN 160
Spring Loaded Safety Valve Si 2504 until PN 400
Function Protecting the system against excessive pressure
Function Protecting the system against excessive pressure
Application Chemical plants, petrochemical plants and low pressure steam, hot water
Application Chemical plants, petrochemical plants and low pressure steam, hot water
Design h Construction: angle-type valve h Size: DN 15 until 50 h Connections: flanges
Design h Construction: angle-type valve h Size: DN 25 until 40 h Connections: flanges
h Seat-Ø: 12 until 32 mm h Max. set pressure: 100 bar h Characteristic: normal h Function: +10%/-10% gas/steam +10%/-20% liquids h Materials: GS, CrNi, CrNiMo h Mounting position: vertical h Perm. temp. open bonnet GS: -10°C until +400°C until 450°C CrNi: -196°C until +300°C CrNiMo: -60°C until +400°C h With screwed and welded massive inlet pipe h Discharge coefficient αw=0.25 (low lift)
h Seat-Ø: 12 until 25 mm h Max. set pressure: 400 bar h Characteristic:normal h Function: +10%/-10% gas/steam +10%/-20% liquids h Materials: GS, CrNi, CrNiMo h Mounting position: vertical h Perm. temp. open bonnet GS: -10°C until +400°C until 450°C CrNi: -196°C until +300°C CrNiMo: -60°C until +400°C h With screwed and welded massive inlet pipe h Discharge coefficientαw=0.25 (low lift) h Special designs for higher pressures on demand
Approvals h TÜV-Type Test Approval
Approvals h TÜV-Type Test Approval
Technical Data Sheet P3104e
Technical Data Sheet P3105e
Full Lift Safety Valve Si 6301 (Closed Bonnet) until PN 16
Full Lift Safety Valve Si 6102 (Open Bonnet) Si 6302 (Closed Bonnet) until PN 40
Full Lift Safety Valve Si 6103 (Open Bonnet) Si 6303 (Closed Bonnet) until PN 160
Function Protecting the system against excessive pressure
Function Protecting the system against excessive pressure
Function Protecting the system against excessive pressure
Application Chemical plants, petrochemical plants and low pressure steam, liquids, heating technology
Application Chemical plants, petrochemical plants and low pressure steam, liquids
Application Chemical plants, petrochemical plants and energy generation systems (water steam)
Design h Construction: angle-type valve h Size: DN 20 until 200 h Connections: flanges h Seat-Ø: 16-155 mm h Max. set pressure: 16 bar h Characteristic: full lift h Function: +5%/-10% gas/steam +10%/-20% liquids h Material: GG h Mounting position: vertical h Perm. temp.: -10°C until +300°C h With press fit seat bush h Discharge coefficient αw=0.78
Design h Construction: angle-type valve h Size: DN 20 until 200 h Connections: flanges h Seat-Ø: 16-155 mm h Max. set pressure: 40 bar h Characteristic: full lift h Function: +5%/-10% gas/steam +10%/-20% liquids h Materials: GS, CrNi, CrNiMo h Mounting position: vertical h Perm. temp.: open bonnet GS: -10°C until +400°C until 450°C CrNi: -196°C until +300°C CrNiMo: -60°C until +400°C h With press fit seat bush h Discharge coefficient αw=0.78
Design h Construction: angle-type valve h Size: DN 20 until 400 Connections: flanges, welded end at the inlet h Seat-Ø: 16-280 mm h Max. set pressure: 62 bar h Characteristic: full lift h Funktion: +5%/-10% gas/steam +10%/-20% liquids h Materials: GS,CrNi, CrMo and CrNiMo h Mounting position: vertical h Perm. temp.: open bonnet GS: -10°C until +400°C until +450°C CrNi: -196 °C until +300°C CrNiMo: -60°C until +400°C CrMo: -10°C until +400°C unti l+550°C h With screwed and welded massive inlet pipe h Discharge coefficient αwmax = 0.78
Approvals h TÜV-Type Test Approval
Approvals h TÜV-Type Test Approval
Approvals h TÜV-Type Test Approval
Technical Data Sheet P3106e
Technical Data Sheet P3107e
Technical Data Sheet P3108e
Full Lift Safety Valve Si 6104 (Open Bonnet) Si 6304 (Closed Bonnet) until PN 160
Full Lift Safety Valve Si 6105 (Open Bonnet) Si 6305 (Closed Bonnet) untilPN 400
Full Lift Safety Valve Si 6106 (Open Bonnet)
Function Protecting the system against excessive pressure
Function Protecting the system against excessive pressure
Function Protecting the system against excessive pressure
Application Chemical plants, petrochemical plants and energy generating systems (water steam)
Application Chemical plants, petrochemical plants and energy generating systems (water steam)
Application Steam systems and power stations
Design h Construction: angle-type valve h Size: DN 25 until 300 h Connections: flanges, welded end at the inlet h Seat-Ø: 16-180 mm h Max. set pressure: 95 bar h Characteristic: full lift h Function: +5%/-10% gas/steam +10%/-20% liquids h Materials: GS,CrNi, CrMo and CrNiMo h Mounting position: vertical h Perm. temp.: open bonnet GS: -10°C until +400°C until +450°C CrNi: -196 °C until +300°C CrNiMo: -60°C until +400°C CrMo: -10°C until +400°C until +550°C h With screwed and welded massive inlet pipe h Discharge coefficient αwmax = 0.78
Design h Construction: angle-type valve h Size: DN 25 until 400 h Connections: flanges, welded end at the inlet h Seat-Ø: 16-255/280 mm h Max. set pressure: 240 bar h Characteristic: full lift h Function: +5%/-10% gas/steam +10%/-20% liquids h Materials: GS and CrMo h Mounting position: vertical h Perm. temp.: open bonnet GS: -10°C until +400°C until +450°C CrMo: -10°C until +400°C until +550°C h With screwed and welded massive inlet pipe h Discharge coefficient αwmax = 0.78
Design h Construction: angle-type valve h Size: DN 125 until 300 h Connections: flanges, welded end at the inlet h Seat-Ø: 77-180 mm h Max. set pressure: 115 bar h Characteristic: full lift h Function: +5%/-10% gas/steam
Approvals h TÜV-Type-Approval
Approvals h TÜV-Type-Approval
Approvals h TÜV-Type-Approval
Technical Data Sheet P3109e
Technical Data Sheet P3110e
Technical Data Sheet P3111e
h Materials: GS, CrMo h Mounting position: vertical h Perm. temp.: GS: -10°C until +450°C CrMo: -10°C until +550°C h With screwed and welded massive inlet pipe h Discharge coefficient αwmax = 0.81
Safety Valve According to API 526 Si 8101...07 (Open Bonnet)
Safety Valve According to API 526 Si 8301...07 (Closed Bonnet)
Safety Valve According to API 526 Si 8401...07 (Design with Bellows)
Function Protecting the system against excessive pressure
Function Protecting the system against excessive pressure
Function Protecting the system against excessive pressure
Application Chemical plants, petrochemical plants, power stations
Application Chemical plants, petrochemical plants, power stations
Application Chemical plants, petrochemical plants, power stations
Design h Construction: h Size: h Connections: h Seat coefficient: h Seat-Ø: h Max. set pressure:
Design h Construction: h Size: h Connections: h Seat coefficient: h Seat-Ø: h Max. set pressure:
Design h Construction: h Size: h Connections: h Seat coefficient: h Seat-Ø: h Max. set pressure:
angle-type valve 1“-8“ inch / DN 25 until 200 flanges D until T 13.6 - 156.4 mm 414 bar
angle-type valve 1“-8“ inch / DN 25 until 200 flanges D until T 13.6 - 156.4 mm 414 bar
angle-type valve 1“-8“ inch / DN 25 until 200 flanges D until T 13.6 - 156.4 mm 414 bar
h Characteristic: full lift/normal h Function: +10%/ -7% gas/steam +10%/ liquids acc. to ASME VIII, +10%/-10% gas/steam +10%/-20% liquids acc. toDIN/AD/TRD h Materials: GS/WCB, CrMo/WC6 and CrNiMo/CF8M h Mounting position: vertical h Perm. temp.: -268°C until +538°C h With nozzle pipe h With adjusting ring h Construction according to API 526 h Discharge coefficient αw= 0.86 gas/steam αw= 0.68 liquids
h Characteristic: full lift/normal h Function: +10%/ -7% gas/steam +10%/ liquids acc. to ASME VIII, +10%/-10% gas/steam +10%/-20% liquids acc. toDIN/AD/TRD h Materials: GS/WCB, CrMo/WC6 and CrNiMo/CF8M h Mounting position: vertical h Perm. temp.: -268°C until +538°C h With nozzle pipe h With adjusting ring h Construction according to API 526 h Discharge coefficient αw= 0.86 gas/steam αw= 0.68 liquids
h Characteristic: full lift/normal h Function: +10%/ -7% gas/steam +10%/ liquids acc. to ASME VIII, +10%/-10% gas/steam +10%/-20% liquids acc. toDIN/AD/TRD h Materials: GS/WCB, CrMo/WC6 and CrNiMo/CF8M h Mounting position: vertical h Perm. temp.: -268°C until +538°C h With nozzle pipe h With adjusting ring h Construction according to API 526 h Discharge coefficient αw= 0.86 gas/steam αw= 0.68 liquids
Approvals h ASME-Approval h TÜV-Type Test Approval
Approvals h ASME-Approval h TÜV-Type Test Approval
Approvals h ASME-Approval h TÜV-Type Test Approval
Technical Data Sheet P3112e
Technical Data Sheet P3112e
Technical Data Sheet P3112e
Safety Valve with Tightening Foil Type SiF 100.000S
Safety Valve with Tightening Foil Type SiF 130.000 Type SiF 140.000 (Bellows)
Function Securing the system against overpressure with highest tightness requirements and at the same time vacuum tightness.
Function Securing the system against overpressure with highest tightness requirements and at the same time vacuum tightness
Application Chemical plants, preferably thermal oil
Application Chemical plants whose safety pressure is especially low
Design h Model: Angle valve h Model size: DN 25 and DN 50 h Connections: In accordance with all standards and factory standards h Seat-Ø: 25 and 50 h max. set pressure: 40 bar h Materials: GS, CrNiMo h Installed position: Variable h Allowable temperature GS-C 25: -30 °C to 400 °C 1.4571: -75 °C to 400 °C h Massive inlet nozzles with sealing foil insert h Discharge coefficient αw= 0,15
Design h Model: Angle valve h Model size: DN 20 - 80 h Connections: In accordance with all standards and factory standards h Seat-Ø: 20 to 80 mm h max. set pressure: 40 bar h Materials: GS, CrNiMo and others h Installed position: Variable h Allowable temperature GS -30 °C to 400 °C (with appropriate choice of material -196 °C to 550 °C) h Massive inlet nozzles with sealing foil insert h Discharge coefficient αw= 0,25
Technical Data Sheet P 3114e
Technical Data Sheet P 3114e
Safety Valve with Tightening Foil Type SiF 150.000 Type SiF 160.000 (Bellows)
Safety Valve (Topseal) Type SiT 250.000 Type SiT 260.000 (Bellows)
Function Securing the system against overpressure with highest tightness requirements and at the same time vacuum tightness.
Function Securing the system against overpressure with high tightness as well as during repeated actuation
Application For gases and vapours in all industrial process systems, nuclear technology
Application Chemical plants and nuclear technology
Design h Model: Angular h Model size: DN 25 - 300 h Connections: In accordance with all standards and factory standards h Seat-Ø: 27 to 275 mm h max. set pressure: 400 bar h Materials: GS, CrNiMo and others h Installed position: Variable h Allowable temperature: GS: -30 °C to +400 °C (with appropriate choice of material -196 °C to 550 °C) h Massive inlet nozzles with sealing foil insert h Discharge coefficient αw= 0,35
Design h Model: Angular h Model size: DN 6 - 300 h Connections: In accordance with all standards and factory standards h Seat-Ø: 6 to 300 mm h max. set pressure: 160 bar h Materials: GS, CrNiMo and others h Installed position: Variable h Allowable temperature: GS: -30 °C to +400 °C (with appropriate choice of material -196°C to 550°C) h Massive inlet nozzles, disc with highly effective seal ring h Discharge coefficient αw= 0,46
Technical Data Sheet P 3114e
Technical Data Sheet P 3114e
Special Designs: On demand
Blocking (B)
Disc with soft seal (.11) -40 until 150C0
Diaphragm seal (.58)
Cooling section (.15)
Bellows (.16)
Heating jacket (.18)
Weld end at the inlet (.22)
Pneumatic piston support (.26ak)
Vibration damper (.38)
Weight loading (.57)
Lift indication with inductive proximity switch (.14)
Position indication for design .26ak
Changeover Valve
Function Alternate changeover of one to two outlets in one operating or standby position each time Application Chemical plants, petrochemical systems, refineries Design h Size: DN20 - 300 mm/DN 20 - 150 h Max. operating pressure:40 bar / 160 bar h Materials: GS, CrNi, CrNiMo and CrMo other materials on demand h Spindle seal with stuffing box or additionally with a bellow h Inlet blocking: One changeover valve on the inlet of two safety valves h Inlet and outlet blocking:Two changeover valves connected via a chain, one changeover valve each on the inlet and outlet of two safety valves Technical Data Sheet P3113e
Assisted Safety Valves
Safety Valve with Supplementary Pneumatic Loading Arrangement f. i. with safety valve Si 61/6302...06 Si 81/83/84...07
Function Protection of the plant against pressure exceeding: by means of additional installations a self-operating spring loaded safety valve becomes an „assisted safety valve“.
Application h High demands with regard to: - stable functioning - tightness until reaction - small closing pressure differences - accurate reaction h Testability of the safety valves within the system Design h With one control unit it is possible to operate one or more safety valves h Operation possible with or without lifting air h Lifting below the spring test pressure by manual action on site or by external electrical signal h For the safety function only one auxiliary energy (pneumatic) is required
Pneumatic piston .26ak
Function h Application of a pneumatic supplementary force in opening and closing direction h No negative influence on the pure spring loaded safety valve functioning in case of a failure of the air supply (special spring)
Application Can be mounted afterwards to all safety valves of the series Si 61/ 6302...06 or Si 81/83/8402...07
Design h 5 sizes h Double piston with applied lifting air h Piston with free run in direction to the spindle in case of a failure in the air supply
Approvals h TÜV-Type Test Approval
Approvals
Technical Data on Demand
Technical Data on Demand
Control Unit PC 53 / PC 50
Function Discharge of the loading air when reaching the adjusted pressure, usually the set pressure
Application Operation of the safety valves with mounted on differential surface double piston or safety valve SiZ 2507 with integrated differential surface piston, respectively
Design h Three times redundant h Testability of reliability during operation h The pressure switches can be checked during operation
Approvals h TÜV-Type Test Approval
Technical Data Sheet P3304e
Safety Valve with System Medium Control SiH 3112
Safety Valve SiH 3115
Function Protecting the systems against excessive pressure
Function Actuation of the main valve SiH 3112
Application (nuclear power stations) Type pressurized water reactor h Primary cycle-Safety valve h Pressure retainer - relief valve h Bypass of the low pressure turbine
Application (nuclear power stations) Type pressurized water reactor h Primary cycle-Safety valve h Pressure retainer - relief valve h Bypass of the low pressure turbine
Type boiling water reactor h Live steam protection h Bypass of the low pressure turbine
Type boiling water reactor h Live steam protection h Bypass of the low pressure turbine
Design h Type: angle-type valve h Size: DN 100 - 700 h Max. pressure:160 bar h Materials: GS, CrNiMo h Seat-Ø: 63 - 500 mm h Opening time: 100 - 200 ms h Mounting position: vertical h Function# principle: main valve with system medium in accordance with the load principle h High tightness until reaction h Load principle of operation by system medium with long opening times h Actuation by several different, independent control valves
Design h Spring loaded safety valve h Spring loaded safety valve with limited and adjustable magnetic supplementary loading (circuit opening connection) h Spring loaded control valve with magnetic supplementary loading (circuit opening connection) h Solenoid control valve as spring loaded control valve with spring with higher adjustment and lifting solenoid in circuit closing connection h Spring loaded control valve with magnetic supplementary loading and with magnetic lifting h Spring loaded control valve with pneumatic supplementary loading h Hydraulically operated control valve h Bellows as assistance for opening h Open position only depending on the pressure and not on the flow
Technical Data on Demand
Technical Data on Demand
Safety Valve with Differential Piston SiZ 2507
Safety Valve with Single Piston SiZ 2507
Hydraulically Operated Safety Valve SiR
Function Protecting the system against excessive pressure
Function Protecting the system against excessive pressure with very high discharge capacity as well as controlled opening in sliding pressure operation
Function h Protecting the system against excessive pressure with very high discharge capacity h Floating pressure control
Application h Conventional power stations: drum, superheater, reheater h Nuclear power stations:steam generator protection on the secondary side
Application Conventional power stations:reheater
Application Conventional power stations:reheater
Design h Type: angle-type valve h Size: DN 50 - 300 h Connections: weld end inlet and outlet, flange possible h Max. pressure:280 bar h Function: +5%/-7% h Materials: GS, CrMo h Seat-Ø: 36 - 200 mm h Mounting position: vertical h Perm. temp.: 560°C h Control: pneumatic PC 53 or PC 50 h Compact design h Belleville spring with spherical centering h Easily accessible for service operations by lifting off the complete upper part of the valve at the bayonet fixing h Integrated pneumatic piston as differential piston h In case of a breakdown of the auxiliary energy function as self-operated spring loaded safety valve
Design h Type: angle-type valve h Size: DN 200 - 400 h Connections: weld end inlet and outlet h Max. pressure:100 bar h Function: +5%/-7% h Materials: GS, CrMo h Seat-Ø: 110 - 280 mm h Mounting position: vertical h Perm. temp.: 560°C h Control: pneumatic PC 54/electropneumatic: EPC 5400 with MP 5356 (floating pressure control possible) h Compact design h Belleville spring with spherical centering h Easily accessible for service operations by lifting off the complete upper part of the valve at the bayonet fixing h Integrated pneumatic piston as differential piston h In case of a breakdown of the auxiliary energy function as self-operated spring loaded safety valve
Design h Type: angle-type valve h Size: DN 250 - 500 h Connections: weld end inlet and outlet h Max. pressure: 80 bar h Materials: GS, CrMo, F91, E911 h Seat-Ø: 150 - 400 mm h Mounting position: vertical h Perm. temp.: 650°C h Control: electrohydraulic with MP 5356 h In combination with HDU-connection to the central hydraulic possible
Approvals h TÜV-Type Test Approval
Approvals h TÜV-Type Test Approval
Approvals h TÜV-Type Test Approval
Technical Data Sheet P3302e
Technical Data Sheet P3302e
Technical Data Sheet P3303e
Spring Loaded Safety Valves with Special Design for Power Stations
Proportional Lift Spring Loaded Safety Valve in Accordance with ASME III - Requirements
Safety Valve SiZ 2507 in Accordance with ASME III - Requirements
Function Protecting the system against excessive pressure
Function Protecting the system against excessive pressure
Application Nuclear power stations: Avoiding pressure hammers in water bearing systems when blowing off the safety valve
Application Nuclear power stations pressurized water reactor: Protection of the steam generator (secondary)
Design h Type: angle-type valve h Size: DN 25 - 80 h Connections: flanges
Design h Type: angle-type valve h Size: DN 80 - 250 h Connections: flanges or weld end
h Max. set pressure:200 bar h Function: opens proportionally to the increase in pressure h Materials: CrNiMo/316Ti h Seat-Ø: 16 - 42 mm h Mounting position: vertical h Perm. temp.: 300°C h Stable functioning by mechanical vibration dampers h Bellows h Certification in accordance with ASME III
h Max. pressure:60 bar h Function: +3% / -5%
Approvals Certification in compliance with TSSA acc. to ASME III requirements
Approvals Certification in compliance with TSSA acc. to ASME III requirements
Technical Data Sheet P3201e
Technical Data Sheet P3202e
h Materials: GS/WCB h Seat-Ø: 56 - 168 mm h Mounting position: vertical h Perm. temp.: 430°C h Compact design h Belleville spring with spherical centering h Easily accessible for service activities by lifting off the complete upper valve section at the bayonet fixing h Pneumatic lifting h Certification in accordance with ASME III
Control Valves
HP-Bypass Station with Safety Function SiRA BH (with Parabolic Disc and Spindle Injection)
HP-Bypass Station with Safety Function SiRA BHT (with Parabolic Disc and Atomized Steam Injection)
HP-Bypass Station with Safety Function SiRA BHL (with Perforated Throttle Disc and Spindle Injection)
Function h Protection of the high pressure section of steam boilers against excessive pressure h Pressure and temperature control
Function h Protection of the high pressure section of steam boilers against excessive pressure h Pressure and temperature control
Function h Protection of the high pressure section of steam boilers against excessive pressure h Pressure and temperature control
Application h Safety valve for the high pressure section of the boiler h Turbine Bypass for starting up and stopping steam generators and in case of failures
Application h Safety valve for the high pressure section of the boiler h Turbine Bypass for starting up and stopping steam generators and in case of failures
Application h Safety valve for the high pressure section of the boiler h Turbine Bypass for starting up and stopping steam generators and in case of failures
Design h Type: h Size: h Capacity:
Design h Type: h Size: h Capacity:
Design h Type: h Size: h Capacity:
h h
h h
h h
h h h h h
angular- /Z-form seat-Ø 72 - 160 mm Kυ-values from 160 m³/h until 800 m³/h Characteristic:linear Body: forged, materials and pipe connection in accordance with customer specification (T-piece for pipe can also be supplied) Injection: via spindle Throttling: controlled/uncontrolled Actuator: hydraulic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
h h h h h
angular- /Z-form seat-Ø 72 - 160 mm Kυ-values from 160 m³/h until 800 m³/h Characteristic:linear Body: forged, materials and pipe connection in accordance with customer specification (T-piece for pipe can also be supplied) Injection: secondary atomized steam injection Throttling: controlled/uncontrolled Actuator: hydraulic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
h h h h h
angular- /Z-form seat-Ø 72 - 160 mm Kυ-values from 100 m³/h until 500 m³/h Characteristic:linear/equal percentage Body: forged, materials and pipe connection in accordance with customer specification (T-piece for pipe can also be supplied) Injection: via spindle Throttling: sound reduced design controlled/uncontrolled Actuator: hydraulic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
HP-Bypass Station with Safety Function SiRA BHsT (Design of Low Sound with Piston Disc and Atomized Steam Injection)
High Pressure Steam Conditioning Valve DCE
Medium-/Low Pressure Steam Conditioning Valve DCE
Function h Protection of the high pressure section of steam boilers against excessive pressure h Pressure and temperature control
Function Pressure and temperature control
Function Pressure and temperature control
Application h Safety valve for the high pressure section of the boiler h Turbine Bypass for starting up and stopping steam generators and in case of failures
Application h High pressure turbine Bypass without safety function for starting up or stopping steam boilers, respectively h Steam transfer in case of turbine failure h Steam conditioning for process steam lines
Application h Medium-/low pressure turbine Bypass without safety function to the condenser h Steam transfer in case of turbine failure h Steam conditioning for process steam lines
Design h Type: h Size: h Capacity:
Design h Type: h Size: h Capacity:
Design h Type: h Size: h Capacity:
h h
h h
h h
h h h h h
angular/Z-form seat-Ø 72 - 160 mm Kυ-values from 100 m³/h until 500 m³/h Characteristic:linear/equal percentage Body: forged, materials and pipe connection in accordance with customer specification (T-piece for pipe can also be supplied) Injection: secondary atomized steam injection Throttling: sound reduced design via four controlled throttle stages Actuator: hydraulic Leakage rate:DIN 3230 part 3 - leakage rate 1as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
h
h h h h
angular/Z-form seat-Ø 28 - 200 mm Kυ-values from 8 m³/h until 800 m³/h Characteristic:linear/equal percentage Body: forged, materials and pipe connection in accordance with customer specification Injection: secondary atomized steam injection or controlled pressure atomizing or spindle injection with atomized steam Throttling: controlled/uncontrolled Actuator: hydraulic, electrical or pneumatic Leakage rate:DIN 3230 part 3 - leakage rate 1as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
h
h h h h
angular/Z-form seat-Ø 72 - 450 mm Kυ-values from 50 m³/h until 400 m³/h Characteristic:linear/equal percentage Body: forged and weldedd materials and pipe connection in accordance with customer specification Injection: secondary atomized steam injection or controlled pressure atomizing or spindle injection with atomized steam Throttling: controlled/uncontrolled Actuator: hydraulic, electrical or pneumatic Leakage rate:DIN 3230 part 3 - leakage rate 1as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
High Pressure Steam Conditioning Valve with Safety Quick Closing Function DDE
Medium-/Low Pressure Steam Conditioning Valve with Safety Quick Closing Function DDE
High Pressure Reducing Valve DRE
Function h Pressure and temperature control h Safety shut-off function for secondary systems
Function h Pressure and temperature control for steam generators and process steam lines/industrial applications h Safety shut-off function for secondary systems
Function Pressure and rate control for steam generators
Application h High pressure turbine Bypass with safety function for starting up or stopping steam generators, respectively h Steam transfer in case of turbine failure h Steam conditioning for process steam lines
Application h Turbine Bypass with safety function for starting up or stopping steam generators, respectively h Steam transfer in case of turbine failure h Steam conditioning for process steam lines
Design h Type: h Size: h Capacity:
Design h Type: h Size: h Capacity:
h h
h h
h h h h h h
angular / Z-form seat-Ø 28 - 200 mm Kυ-values from 8 m³/h until 800 m³/h Characteristic:linear/equal percentage Body: forged, materials and pipe connection in accordance with customer specification Steam filter: for SAV-function (3mm hole diameter) Injection: secondary atomized steam injection, controlled pressure atomizing Throttling: controlled/uncontrolled Actuator: hydraulic or pneumatic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
h h h h h h
angular / Z-form seat-Ø 72 - 450 mm Kυ-values from 50 m³/h until 4500 m³/h Characteristic:linear/equal percentage Body: forged, weld connection in accordance with customer specification Steam filter: for SAV-function (3mm hole diameter) Injection: secondary atomized steam injection, controlled pressure atomizing Throttling: controlled/uncontrolled Actuator: hydraulic or pneumatic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
Application High pressure start-up reducing station
Design h Type: h Size: h Capacity: h h h h h h
angular / Z-form seat-Ø 28 - 200 mm Kυ-values from 8 m³/h until 800 m³/h Characteristic:linear/equal percentage Body: forged, materials and pipe connection in accordance with customer specification Throttling: controlled/uncontrolled Actuator: hydraulic, electrical or pneumatic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
Medium Pressure Reducing Valve DRE
Low Pressure Reducing Valve DRE
Medium and Low Pressure Reducing Valve with Quick Closing Safety Function DBE
Function Pressure and rate control for steam generators
Function Pressure and rate control for steam generators, process steam lines and industrial plants
Function h Pressure and rate control for steam generators, process steam lines and industrial plants h Safety shut-off function for secondary systems
Application High pressure Bypass valve without steam cooling as start-up reducing station
Application Vaporization of feed water reservoirs, soot blowers, etc.
Application Vaporization of feed water reservoirs, soot blowers, etc.
Design h Type: h Size: h Capacity:
Design h Type: h Size: h Capacity:
Design h Type: h Size: h Capacity:
h h
h h
h h
h h h h
angular / Z-form seat-Ø 72 - 450 mm Kυ-values from 50 m³/h until 4500 m³/h Characteristic:linear/equal percentage Body: forged, weld or cast steel design, respectively, materials and pipe connection in accordance with customer specification Throttling: controlled/uncontrolled Actuator: hydraulic, electrical or pneumatic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
h h h h h
angular seatØ 100 - 500 mm Kυ-values from 100 m³/h until 5000 m³/h Characteristic:linear/equal percentage Body: cast steel, materials and pipe connection in accordance with customer specification Throttling: controlled/uncontrolled Steam filter: for SAV-function (3mm hole diameter) Actuator: hydraulic, electrical or pneumatic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
h h h h h
angular seat-Ø 100 - 500 mm Kυ-values from 100 m³/h until 5000 m³/h Characteristic:linear/equal percentage Body: cast steel, materials and pipe connection in accordance with customer specification Throttling: controlled/uncontrolled Steam filter: for SAV-function (3mm hole diameter) Actuator: hydraulic, electrical or pneumatic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
High Pressure Quick Closing Valve DAE
Medium and Low Pressure Quick Closing Valve DAE
Cross Valve DAK
Function h Shut-off/protection of the secondary steam lines against excessive pressure and temperature h Level protection
Function h Shut-off/protection of the secondary steam lines against excessive pressure and temperature h Level protection
Function Blocking of mass flows
Application h Important steam systems h Steam tappings h Feed water reservoirs, etc.
Application h Condensers and heat exchangers h Steam tappings, etc.
Application High pressure steam systems
Design h Type: h Size: h Body:
Design h Type: h Size: h Capacity: h Body:
Design h Type: h Size:
h h h h
angular seat-Ø 50 - 450 mm forged, material and pipe connection in accordance with customer specification Steam filter: for SAV-function (3mm hole diameter) Actuator: hydraulic or pneumatic, for SAV-function with closing spring Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
h h h h
angular
forged, material and pipe connection in accordance with customer specification Steam filter: for SAV-function (3mm hole diameter) Actuator: hydraulic or pneumatic, for SAV-function with closing spring Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
cross valve seat-Ø 100-500
h Body:
forged, material and pipe connection in accordance with customer specification
h Actuator:
electrical or hydraulic
h Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible h Mounting position: vertical or horizontal
Technical Data on Demand
Spraywater Control Valve WRE (High Pressure Series)
Spraywater Control Valve WRE (Low Pressure Series)
Spraywater Shut-off Valve WAE (High Pressure Series)
Function Rate control
Function Rate control
Function Secure shutting off of feed water and condensate
Application h Temperature control in combination with water quantity control at the steam conditioning station and spraywater systems h Water quantity control at the temperature control of superheaters and reheaters of steam generators
Application h Temperature control in combination with water quantity control at the steam conditioning station and spraywater systems h Water quantity control at the temperature control of superheaters and reheaters of steam generators
Application Pre-blocking of spraywater control valves
Design h Type:
Design h Type: h Size: h Capacity:
Design h Type:
h h h h h h h h
angular, transition and Z-for Size: Seat-Ø 18 - 50 mm Capacity: Kυ-values from 1 m³/h until 45 m³/h Characteristic:linear/equal percentage Body: forged, material and pipe connection in accordance with customer specification Throttling: depending on the pressure rating, max. four stages Actuator: hydraulic, electrical or pneumatic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
h h h h h h
angular DN 25-150 Kυ-values from 1 m³/h until 100 m³/h Characteristic:linear/equal percentage Body: cast steel, material and pipe connection in accordance with customer specification Throttling: depending on the pressure rating, max. four stages Actuator: hydraulic, electrical or pneumatic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
h Size: h Capacity: h Body:
angular, transition and Z-form Seat-Ø 18 - 50 mm Kυ-values from 10 m³/h until 80 m³/h forged, material and pipe connection in accordance with customer specification
h Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible h Mounting position: vertical, horizontal and hanging
Technical Data on Demand
Spraywater Combination WEZ
Customer-Specific Design Valve Combination DDZ
Customer-Specific Design Pressure Reducing Valve (Low Sound Version)
Function Rate, level and temperature control
Function Combined steam conditioning and quick closing valve
Function h Pressure and rate control for steam generators h Safety blocking function for secondary systems
Application h Temperature control in combination with the steam conditioning station and spraywater cooling h Temperature control of superheaters and reheaters of steam generators
Application h Turbine Bypass with/without safety function for starting and stopping steam boilers h Steam transfer in case of turbine failure h Steam transfer for process steam lines
Application h Bypass valve as starting-up reducing station with particular sound requirement h Steam tapping
Design h Type: h Size: h Capacity:
Design h Type: h Size: h Capacity:
Design h Type: h Size:
h h
h h
h Characteristic:linear/equal percentage h Body: forged, material and pipe connection in accordance with customer specification h Throttling: controlled/uncontrolled h Actuator: hydraulic, electrical or pneumatic h Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible h Mounting position: vertical, horizontal and hanging
h h h h
Z-form Seat-Ø 18 - 50 mm Kυ-values from 1.4 m³/h until 50 m³/h Characteristic:linear/equal percentage Body: forged, material and pipe connection in accordance with customer specification Throttling: controlled/uncontrolled Actuator: hydraulic, electrical or pneumatic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
h h h h
as agreed upon Seat-Ø 18 - 50 mm Kυ-values from 25 m³/h until 4500 m³/h Characteristic:linear/equal percentage Body: forged, material and pipe connection in accordance with customer specification Throttling: controlled/uncontrolled Actuator: hydraulic, electrical or pneumatic Leakage rate:DIN 3230 part 3 - leakage rate 1 as well as ANSI/FCI 70-2 Class V possible Mounting position: vertical, horizontal and hanging
Technical Data on Demand
transition/Z-valve Seat-Ø 18 - 50 mm
Technical Data on Demand
Control Unit PC 50 PC 53 PC 54
Electropneumatic Control Unit EPC 5400
Measuring and Test Unit MP 5356
Function Discharge of the loading air when reaching the adjusted pressure, generally the set pressure
Function Discharge of the loading air when reaching the adjusted pressure, generally the set pressure and controlled opening in sliding pressure operation
Function h Measuring of the operation pressure and release of an electrical signal while reaching the response pressure (three times redundant) h Testing of the safety functions
Application Operation of the safety valves with mounted-on differential surface double piston or safety valve SiZ 2507 with integrated differential surface piston
Application h Operation of the safety valve SiZ 2507 with integrated single piston h Signalisation for controlled opening in the sliding pressure operation via process control technique h Signalisation of the safety functions via the measuring and testing unit MP 5356
Application Signalisation of the safety function of the electro-pneumatic and hydraulic control
Design h 3-times redundant h Testability of function during operation h Pressure switches can be checked during operation
Design h 3-times redundant h Testability of function during operation
Design h 3-times redundant h Testability of function during operation h Pressure switches can be checked during operation
Approvals h TÜV-Type Test Approval
Approvals h TÜV-Type Test Approval
Approvals h TÜV-Type Test Approval in connection with electo-pneumatic and hydraulic control
Technical Data Sheet P3304e
Technical Data Sheet P3306e
Technical Data Sheet P3307e
Shut-off Valves, Non-return Valves
Low Pressure Gate Valve NDS
Intermediate Pressure Gate Valve MDS
High Pressure Gate Valve HKS
Function Isolation of mass flows
Function Isolation of mass flows
Function Isolation of mass flows
Application Steam and liquids
Application Steam and liquids
Application Steam and liquids
Design h Model: Straight-through pattern with flanges or weld ends welded-on ends h Model size: DN 50 - DN 1200 PN 10 - PN 25 h Housing: Die forged and/or pressed sheet steel half-shells h Materials: 1.0460; 1.5415; 1.7335 and/or special materials acc. DIN and ASME h Drive: Pneumatic, electric, hydraulic and with handwheel h Acc. EN 558-1or ASME, face-to-face and end-to-end dimensions
Design h Model: Straight-through pattern with flanges or weld ends h Model size: DN 50 - DN 1200 PN 40 - PN 100 h Housing: Die forged and/or as pipe base design h Materials: 1.0460; 1.5415; 1.7335 and/or special materials acc. DIN and ASME h Drive: Pneumatic, electric, hydraulic and with handwheel h Acc. EN 558-1 or ASME, face-to-face and end-to end dimensions
Design h Model: Straight-through pattern with flanges or weld ends h Model size: DN 50 - DN 500 h Housing: Block forged and welded h Materials: 1.0460; 1.6368; 1.5415; 1.7335; 1.7380; 1.4903; 1.4905 and/or special materials acc. DIN and ASME h Drive: Pneumatic, electric, hydraulic and with handwheel
Technical Data Sheet P3602e
Technical Data Sheet P3602e
Technical Data Sheet P3601e
Gate Valve Nuclear Power Plant Design KTS
Low and Intermediate Pressure Swing Check Valve ND RSK MD RSK
High Pressure Swing Check Valve HD RSK
Function Isolation of mass flows
Function Prevention of return of mass flows
Function Prevention of return of mass flows
Application Steam and liquids
Application Steam and liquids
Application Steam and liquids
Design h Model: Straight-through pattern with flanges or weld ends h Model size: DN 50 - DN 1200 all pressure stages h Housing: Forged for every area of use and fail-safe design h Materials: 1.0460; 1.5415; 1.7335 and/or special materials acc. DIN and ASME h Drive: Pneumatic, electric, hydraulic and with handwheel
Design h Model: Straight-through pattern with flanges or weld ends welded-on ends h Model size: DN 50 - DN 800 PN 40 - PN 100 h Housing: Die forged and/or as pipe base design h Materials: 1.0460; 1.5415; 1.7335 and/or special materials acc. DIN and ASME h Face-to-face or end-to-end dimensions acc. EN 558-1or ASME h Special model: Pneumatic, hydraulic drive
Design h Model: Straight-through pattern with weld ends h Model size: DN 50-DN 500 h Housing: Block forged and welded h Materials: 1.0460; 1.6368; 1.5415; 1.7335; 1.7380; 1.4903; 1.4905 and/or special materials acc. DIN and ASME h Special model: Pneumatic, hydraulic drive
Technical Data Sheet P3602e
Technical Data Sheet P3603e
Technical Data Sheet P3605e
High Pressure Globe Valve HD-ASV Type 730 - 500
High Pressure Check Valve HD-RSV Type 710 - 500
High Pressure Dirt Catcher HD-SF Type 828 - 500
Function Isolation of mass flows
Function Prevention of return of mass flows
Function Protection against dirt infront of valves, pumps and fittings
Application Steam and liquids, gases
Application Steam and liquids, gases
Application Steam and liquids, gases
Design h Model: Straight-through pattern h Model size: DN 10 - 100 h Pressure Range: PN 250 - 500 Class 900 - 2500 h Temperature: -196 °C - +650 °C h Materials: 1.0460; 1.5415; 1.7335; 1.7380; other materials on demand h Connections: Flanges, weld ends h Drive Handwheel, gears, electrical or pneumatic drive
Design h Model: Straight-through pattern h Model size: DN 10 - 100 h Pressure Range: PN 250 - 500 Class 900 - 2500 h Temperature: -196 °C - +650 °C h Materials: 1.0460; 1.5415; 1.7335; 1.7380; other materials on demand h Connections: Flanges, weld ends
Design h Model: Straight-through pattern h Model size: DN 10 - 100 h Pressure Range: PN 250 - 500 Class 900 - 2500 h Temperature: -196 °C - +650 °C h Materials: 1.0460; 1.5415; 1.7335; 1.7380; other materials on demand h Connections: Flanges, weld ends
Technical Data Sheet P 3604e
Technical Data Sheet P 3605e
Technical Data Sheet P 3606e
Pressure Reducing Valves for the Water Industry
Pressure Reducing Valve Re 3421 Re 3422 Re 3423
Transfer Valve Re 5221 Re 5222
Function Independent control of the low pressure in case of inhomogeneous extraction quantity by the control of the supplied volume from the high pressure network
Function Pressure keeping in the water pipe net for cold water by permanent control of the discharge flow quantity if the nominal pressure is exceeded
Application Water supply systems
Application Water supply systems
Design h Size: DN 65-400 h Max. pressure: 40 bar h Materials: GG, GGG h Body enamelled inside h Insert chemically nickel-plated h Piston control via Venturi nozzle and with spring loading h Easy to maintain
Design h Size: DN 65-400 h Max. pressure:25 bar h Materials: GG, GGG h Body enamelled inside h Piston control via Venturi nozzle and with spring loading h Easy to maintain
Technical Data Sheet P3501e
Technical Data Sheet P3502e
Service
Spare Parts’ Service
Repair at Bopp & Reuther
An efficient spare parts’ service - the basis of a quick service
Repair activities and general overhaul at Bopp & Reuther.
Owing to our comprehensive archives and a well-considered identification system for the components manufactured by us, we supply spare parts of original design. Thus, we are able, even for plants which are 30 years old or older, to provide the required spare parts. We have a sufficiently great number of all common spare parts, in particular gaskets, on stock so that they may also be delivered within a short time. If a spare part must be manufactured as single piece certain production capacity will of course be reserved.
If a repair on site is impossible we will carry it out in our own service shop. There, we are also able to perform general overhaul operations of your valve.
For every application we offer a wide range of highest-quality service activities The activities performed by our valves’ service are applicable for shut-off, safety and control valves. Of course, this is also true for valves made by other manufacturers. Spare Parts’ Service h Demand analysis at the customer’s site h Availability of all common parts on stock h Rapid service / 24-hour-service h Guaranteed long-term spare parts’ supply Repair at Bopp & Reuther h Damage analysis h Repair h Modernization h Reconstruction Mounting on Site h Commissioning h Maintenance h Repair h Mobile testing of safety valves
Information P3701e
Such an overhaul, the result of which is the same as with a new valve regarding functionability and work life, comprises the following steps: h Visual control by our specialist personnel h Determination of the scope of repair and of the costs h A quotation is submitted to the customer h After release by the customer the repair activities are carried out h Final test by our quality assurance The repair activities are subject to a comprehensive quality assurance, which ranges from the testing of the materials to be processed over the complete production testing until the final functional tests.
Mounting on Site
Our employees‘ qualification safeguards the efficiency and the high technical level of our service. The well-founded professional formation and permanent training of our service employees are an essential precondition for the high quality of our performance. Together with a careful planning the qualification of our service team guarantees the technically perfect and economic execution of the service activities. Our service technicians are equipped with all special tools and spare parts necessary for repair on site. Thus, the repair of valves can be made expertly and rapidly, permitting a short-term reoperation.
Bopp & Reuther Sicherheits- und Regelarmaturen GmbH Carl-Reuther-Straße 1 D-68305 Mannheim Postfach 31 01 06 D-68261 Mannheim Telefon: 0621-749 0 Tefax: 0621-749 1800 e-mail: [email protected] Internet: www.SR.BoppuReuther.com