Asme B40.100 [PDF]

Zitiervorschau

AN AMERICAN NATIONAL STANDARD

ASME B40.100a-2001 ADDENDA to ASME B40.100- 1998 PRESSURE GAUGES AND GAUGE ATTACH ME NTS

THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS Three Park Avenue

0

New York, NY 10016

--`,,``,``,`,,``,,,`,,,``,`,,-`-`,,`,,`,`,,`---

Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS

Licensee=Boston Scientific/5955842001 Not for Resale, 06/09/2008 08:12:31 MDT

Date of Issuance: December 31, 2001

This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The Standards Committee that approved the code or standard was balanced t o assure that individuals from competent and concerned interests have had an opportunity t o participate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large. ASME does not "approve," "rate," or "endorse" any item, construction, proprietary device, or activity. ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake t o insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Participation by federal agency representativeís) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code o r standard. ASME accepts responsibility for only those interpretations of t h i s document issued i n accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals.

No part of this document may be reproduced i n any form, i n an electronic retrieval system or otherwise, without the prior written permission of the publisher.

The American Society of Mechanical Engineers Three Park Avenue, New York, NY 10016-5990

Copyright O 2001 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All Rights Reserved Printed in U.S.A.

Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS

Licensee=Boston Scientific/5955842001 Not for Resale, 06/09/2008 08:12:31 MDT

--`,,``,``,`,,``,,,`,,,``,`,,-`-`,,`,,`,`,,`---

ASME is the registered trademark of The American Society of Mechanical Engineers.

ASME B40.100a-2001

Following approval by the ASME B40 Committee and ASME, and after public review, ASME B40.1, ASME B40.2, and ASME B40.5 were approved by the American National Standards Institute (ANSI) on December I , 2000; and ASME H40.6 was approved by ANSI on February 5 , 200 I . Addenda to the 1998 edition of' ASME 1340.100 are issued i n ihe forni of replriceinent pages. Revisions, additions, and deletions are incorporated directly into the affected pages. It is advisable, however, that this page, the Addenda title and copyright pages, and all replaced pages be retained for reference.

SUMMARY OF CHANGES This is the first Addenda to be published to ASME B40.100- 1998. Replace or insert the pages listed. Changes given below are identified on the pages by a inargin note, (a), placed next to the affected area. The pages not listed are the reverse sides of the listed pages and contain no changes. Locvitioti

Cllm