33 5 2MB
The Lost Baby Penguin by @amiguruku
Introduction & Technical Specification
Hello, my name is Anita Suria! Thank you for purchasing my pattern! If you have any inquiries please do not hesitate to find me on Instagram @amiguruku. Say hi and share your finished creation! Happy crocheting!
CROCHET PATTERNS The Lost Baby Penguin
DIFFICULTY LEVEL Intermediate 12 cm
SIZE Approximately size 4.8’’ / 12 cm tall (until pompom), 3.6” / 9 cm for penguin only.
GAUGE Stitch tight enough in order to reduce the gap of the fibre fill.
ABBRREVIATION MR – magic ring ch – chain sc – single crochet inc – 2sc in one stitch hdc – half double crochet dc – double crochet dec – single crochet 2 together hdcss – half double crochet slip stitch sl st – slip stitch
NOTES This pattern is for personal use only, please DO NOT duplicate or distribute in any way, shape, or form. Finished item may be sold but please credit Amiguruku (@amiguruku) as the pattern author.
Materials
Acrylic yarn/Milk cotton yarn (around 40% Milk Fiber, 60% Cotton)
3 ply, with colours variant according to the projects. Please feel free to substitute the color. • White • Beige • Salmon pink • Pale blue • Honey yellow
Safety eyes Accessories Poly fibre-fills Crochet Hook
Ø 6 mm, black Ø 12 mm, Wooden button 2.25 mm or 3/0, feel free to adjust with your own yarn. -
Tapestry needle Needle pins All purpose glue
These are the yarns that I used for this project, but you can always substitute them with any yarns you have or with the colours you desire. Please note that different yarn sizes will result in different doll size.
Technical Method & Tips *Tips #1: Use milk cotton yarn/acrylic yarn for skin part to get the desired ‘fluffiness’ effect, and use soft cotton yarn to do the other parts so it won’t come out hairy. *Tips #2: You have to crochet the stitches tightly with smaller number of hook suggested for the yarn to achieve smooth doll surface with small pores. *Tips #3: Fill the doll with as much poly-fibre as you possibly can, in order to make the doll firm.
How to decrease (invisible decrease) in round/circle:
Take the front loops for the next two stitches only.
Yarn over through the first two loops.
Yarn over once again through the rest.
How to do clean fasten off (invisible finish): Skip this stitch.
After you cut the yarn, insert the yarn into the second stitch after your last stitch.
Insert the yarn back into the last loop you’ve done.
Here is the result.
Instructions
HEAD: I will use BLACK font as pale blue color, and RED font as white color. Start with pale blue color. R1: Start with 7sc in magic ring. (7) R2: increase 7 times. (14) R3: (sc, inc) x 7 (21) R4: (sc 2, inc) x 7 (28) R5: (sc 3, inc) x 7 (35) R6: (sc 4, inc) x 7 (42) R7-R8: sc 42 (42) (2 Rounds) R9: (sc 5, inc) x 7 (49) R10-R11: sc 49 (49) (2 Rounds) R12: sc 18, sc 4, sc 5, sc 4, sc 18 (49) R13: sc 17, sc 6, sc 3, sc 6, sc 17 (49) R14-R15: sc 16, sc 7, sc 3, sc 7, sc 16 (49) (2 Rounds) R16: sc 14, inc 2, inc 3, sc 4, sc 3, sc 4, inc 3, inc 2, sc 14 (59) R17: sc 18, sc 10, sc 3, sc 10, sc 18 (59) R18-R19: sc 18, sc 23, sc 18 (59) (2 Rounds)
R20: sc 16, dec, sc 2, dec, sc 15, dec, sc 2, dec, sc 16 (55) R21: (dec, sc 3) x 3, dec, sc, sc 2, (dec, sc 3) x 3, dec, sc 3, (dec, sc 3) x 3 (44) R22: (dec, sc 2) x 3, dec, sc, sc , (dec, sc 2) x 3, (dec, sc 2) x 4 (33) R23: (dec, sc) x 4, (dec, sc) x 2, dec, sc, (dec, sc) x 4 (22) R24: dec 11 (11) Stuff the body with poly-fibre firmly. R25: dec 5, sc (6) Cut the yarn and fasten off.
LEGS (2 pieces) & BODY: I will use BLACK font as pale blue color, and RED font as white color. Start with pale blue color. R1: Start with 7sc in magic ring. (7) R2-R3: sc 7 (7). (2 Rounds) You’ve made the first leg, cut the yarn and leave a short tail. You can continue and make the other but DO NOT cut the yarn. Make ch 3, and join both legs by continuing the stitch on the first leg.
1
2
3
4
5
6
R4: sc, (inc, sc) x 3, hdc, 3 dc in 1 stitch, hdc, sc, (inc, sc) x 3, hdc, 3 dc in 1 stitch, hdc (30) R5: sc 30 (30) R6: (sc 4, inc) x 6 (36) R7: sc 12, sc 7, sc 17 (36) R8: sc 11, sc 9, sc 16 (36) R9-R13: sc 10, sc 11, sc 15 (36) (5 Rounds) R14: sc 6, dec, sc 2, sc 5, dec, sc 4, sc 3, dec, sc 7, dec, sc (32) R15: sc 9, sc 10, sc 13 (32) Stuff the body firmly, continue filling when sewing it to the head. Cut the yarn and leave a long tail to attach it to the head.
BILL: In honey yellow: Work in foundation chain, chain 5, turn. R1: sc 3, 3sc in 1 stitch, sc 2, inc (10) R2: sc 10 (10) cut the yarn and make an invisible finishing. (see the method before the pattern starts).
FLIPPER (x2 pieces): In pale blue color: R1: Start with 6sc in magic ring. (6) R2: (sc 2, inc) x 2 (8) R3: (sc 3, inc) x 2 (10) R4: sc 10 (10) R5: (sc 4, inc) x 2 (12) R6: sc 12 (12) R7: sc 4, dec, sc 6 (11) R8: sc 3, dec, sc 6 (10) Do not stuff. Cut the yarn and leave a long tail to sew it to the body.
SCARF: You can choose one of two ways below:
Add a wooden crocheted button.
a) Crocheted:
knitted
In salmon pink: R1: Work in linear row, ch 101 (adjustable), turn. R2: sl st 100 (100), ch, turn. R3-R4: sl st 100 (100) in BLO, ch, turn. R5: sl st 100 (100) in BLO, ch 9, sl st to the other corner. Cut the yarn and fasten off.
Add a button.
b) Knitted: in salmon pink: R1: cast on 10 (10) R2: knit 10 (10) R3: purl 10 (10) Repeat until you get the length that you desire. Cast off 10 and cut the yarn.
BEANIE HAT: In beige color, work in linear row: R1: ch 25, turn. R2: hdcss 24 (24), ch, turn. R3: sl st 4 in BLO, sc 8 in BLO, hdc 11 in BLO, hdc in both loops 1 (24), ch, turn. R4: repeat R2 R5: repeat R3 Repeat the rounds until the length reaches the circumference of the penguin’s head, The last round must be hdcss 24 (24).
Watch my Tutorial video on https://www.youtube.com/c/Amiguruku
Back side
Front side
1
2
3
Back side
Back side
Front side
4
5
6
Front side
Front side
Front side
Decrease along (peak and valey).
Back loop only
Both loops
-
Sew the edge together with slip stitch (one side with BLO, the other side with both loops). See the pictures.
-
Rejoin a new yarn at the top part and decrease along (peak and valey).
-
Fasten off, leaving a long tail for closing the hole. Using a tapestry needle, pass the yarn tail through the stitches of the top opening of the hat and pull to gather close. Make a couple of stitches to secure.
-
Add a pompom at the top of the beanie. How to make a pompom:
1
2
4
5
Wrap 80-90 times
3
6 Trim nicely.
FINISHING:
Use a piece of yarn to make depth behind both eyes by pulling it tightly through them. Sew both ends of the yarn together and tighten.
Eyes on 17th round of the head, with 10 -11 stitches gap.
Add blush on from soft pastel/real make-up.
Mouth on 17th-19th round of the head.
Thank you for purchasing my pattern, please kindly follow my IG: @amiguruku! Post your work and don’t forget to tag me, I will gladly upload/story at my account ^^ See you on another pattern guides! ☺
Check out my other pattern designs (available on my Etsy shop – click any picture below):