AirMaster - T1 (Controller - Software For Positive Displacement Compressor) Factsheet [PDF]

Zitiervorschau

A05.2 - TECHNICAL

Air

TM

The AirMaster™ T1 has been custom designed and engineered as an advanced embedded control solution with features and functionality that enable implementation across a wide scope of applications and control solutions.

1

The user interface employs simple and intuitive controls combined with a graphic backlit LCD display. The display uses a symbolic concept, supported by user selectable language text, enabling world market deployment without the need for territorial variants. The AirMaster™ T1 is available in two display type versions: black characters on a green backlit background [1] or white characters on a blue backlit background. The blue display version can be inverted to provide blue characters on a white backlit background.

The AirMaster™ T1 is fully compatible with, and complimented by, a range of CMC system solutions including efficiency control and analysis and local or remote supervisory products using a proven industrial RS485 network. Available in basic format [1], or integrated with an LED matrix indicator panel [2]. Custom overlay options, for incorporating logo for example, are also available.

2

World Market, Symbolic and Language Text, Graphic Display Concept Custom and Configurable I/O VSD Ready with Optimum Speed Technology Multiple VSD Systems Compliant Integral Emergency Stop Output Isolation Compliant Delivery and Internal Pressure Sensor Option with ∆P Monitoring Management and Monitoring Systems Network Enabled Real Time Clock with Pressure Schedule

CMC n.v. INDUSTRIEPARK DE BRUWAAN 37B-9700 OUDENAARDE tel. +32 (0)55 23 70 90 fax +32 (0)55 45 75 18 email : [email protected] internet : www.cmcnv.com

A05.2 - TECHNICAL SPECIFICATIONS

Technical Processor Flash EPROM / RAM A to D Resolution Display Controls

Basic Format [1] Construction Mounting Dimensions Connections Power Supply Conformity Temperature - Operating Temperature - Storage Relative Humidity Vibration EMC

16bit ST ST10R272 1Mbyte / 1Mbyte 12bit 128x64 monochrome graphic backlit LCD 7x tactile push buttons

Stainless steel front, polyethylene overlay, IP65 Steel corrosion protected rear enclosure, IP20 135mm x 86mm rectangle panel aperture 144mm x 96mm x 62mm Rear terminals, Phoenix compatible 24Vac/dc +-15% 50VA @ 50/60Hz

1

0ºC to +55ºC (32ºF to 130ºF) IEC 68-2-1 A/2 B/3 Ca/14 Nb/30 Db -25ºC to +75ºC (-13ºF to 167ºF) IEC 68-2-1 A/2 B/14 Na 750Kohms Switching or PTC: 1.4mA, closed < 750ohms, open > 4000ohms IEC 34-11-2, VDE 0660 Contacts : 250Vac, 8A (cosØ=1) / (5ADC) AI 1 : 4-20mA AI 2 & 3: selectable using plug-in analogue conditioning modules (ACM’s) One or two ACM’s can be fitted to the T1 in any combination (see ‘Analogue Conditioning Modules’ fact sheet A10) 4 to 20mA @ 24VDC; 500ohm maximum load RS485 Port(1): CMC Multi485 systems protocol, 9600 baud RS485 Port(2): XPM485 protocol or application specific Rx/Tx Port(3): XPC expansion protocol, TTL

Model Variants

T1

Outputs Inputs 3x 8x 6x Digital Analogue Relay 4-20mA

Communications RS485 Rx/Tx XPC #1 #2

Real Time Clock

Display

T1-45-CG

Green

T1-45-CB

Blue

CMC n.v. INDUSTRIEPARK DE BRUWAAN 37B-9700 OUDENAARDE tel. +32 (0)55 23 70 90 fax +32 (0)55 45 75 18 email : [email protected] internet : www.cmcnv.com