The bulldozer 0439366380, 9780439366380 [PDF]

Zitiervorschau

Special Vehicle Series : 03

Bulldozer

Pattern

h t t p : / / w w w. c a n o n . c o m / c - p a r k / e n /

View of completed model

* This model was designed for Papercraft and may differ from the original in some respects.

1/43 scale A bulldozer is a construction vehicle that can use its front blade to level ground or its rear ripper to scrape earth and sand and to break up rocks. Categorized as a large bulldozer, the D155AX-6 is used in projects such as civil engineering works and quarrying sites. While a traditional bulldozer blade has a gently curved surface, the SIGMADOZER developed for this model has a profile that resembles the Greek letter sigma when viewed from above. Since it excavates from the central area of the blade, the D155AX-6 is more efficient than other bulldozers.

Parts list (pattern): Ten A4 sheets (No. 1 to No. 10) No. of Parts: 77 Build this model with careful reference to the Assembly Instructions.

Editor:

Blade capacity :

9.4 m3

Overall length :

8,225 mm

Overall width (main body) :

2,700 mm

Overall height :

3,395 mm

* If you prefer that the rear sides of the paper parts not be white, print the two optional reverse-side printing sheets on thin paper such as standard printer paper and adhere these to the reverse sides of sheets No. 8 to No. 10 using spray adhesive, then build the model as described in the instructions.

Bulldozer

Pattern

Bulldozer

Pattern

Pattern

Bulldozer

© Keisuke Saka

Do not hit other people with the pointed edges. Doing so could result in injury. Adults should make sure that children observe this caution.

http://www.canon.com/c-park/en/

CAUTION

Bulldozer

Pattern

Bulldozer

Pattern

Bulldozer

Pattern

Bulldozer

Pattern

Bulldozer

Pattern

Bulldozer

Pattern

Special Vehicle Series

Bulldozer