Sten mk2 Complete Machine Instructions [PDF]

  • Author / Uploaded
  • mic29
  • 0 0 0
  • Gefällt Ihnen dieses papier und der download? Sie können Ihre eigene PDF-Datei in wenigen Minuten kostenlos online veröffentlichen! Anmelden
Datei wird geladen, bitte warten...
Zitiervorschau

The

STEN MKII Complete machine plans

STEN SUBMACHINE GUN, 9-millimetre submachine gun that became the standard such weapon in the British Commonwealth armed forces during World War II. Moreover, hundreds of thousands of Sten guns were provided to underground movements everywhere in Europe during that war. The gun was so ubiquitous that its name became all but a generic term for submachine gun. The Sten gun remained in service until the late 1950s. The most common version of the Sten gun was 30 inches (76.2 cm) long with a barrel of 7.5 inches (19 cm). It fired at a rate of 550 rounds per minute, and it had a 32-round box magazine that, however, tended to jam if more than 30 rounds were loaded. The butt was a steel frame that, with the barrel, could be removed without difficulty so that the disassembled weapon could be easily hidden. Its weight was just over six pounds (2.7 kg) unloaded. Please set up Acrobat to “View - Bookmarks and Page”

Sten Mk II PARTS LIST 1. 2.

Barre I

4.

Barrel sleeve Barre I sleeve lock Barre 1 sleeve lock spring

5. 6. 7. 8.

sight Barrel bushing Receiver tube Receiver cap

3

l

Front

Trigger housing 9 lb. Butt stock assembly:

: i

11. Magazine 12. Magazine 13. Magazine 14. Magazine 15. Magazine 16. 17. 18. 19. 20. 21. 22. 23.

syring

26. Sear 27. Bolt Firing pin 29. Extractor 30. Extractor spring 31. Extractor p i n 32.

28.

stock t u b i n g butt plate stock grip stock ring

housing

housing spacer housing spacer screw latch latch spring

Trigger Trigger spring Trigger pin Disconnector

24. Sear 25. Sear

33. 34. 35. 36. 37. 38. 39. 40. 41.

Closing spring

Closing spring cup Trigger housing cover TrigF: housing cover screw (2) Magazine houskg

Magazine follower Magazine spring Magazine spring latch Magazine botiom

42. Rear

sight

Disconnector pin Selector Selector spring

NOTES: 1 . Bolt stopping surface on barrel is lmm f o r -

Selector plunger (2)

2.

ward of magazine well slot. Bolt stroke is 135mm.

I

I’

I_

I

\

---

/+

/--/

, ,>’ / f-

m -

- _

i-

-

0

I

6

Receiver tube Material: seamless steel tubing

I

f- _-_- _ -__~

cc?

/ _A_:i -_--

/

q$ 1 1 /

dd;L