Sensor Ga 30 [PDF]

Zitiervorschau

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

Blad / page

44

1(26)

PRESSURE TRANSDUCER KAVLICO Internal name + designation :

Press. transduc. + Article number

Technical data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Common data Material (main body) : stainless steel, 316L Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temp..: -20 °C to 100 °C Ambient temp..: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Includes extra EMC-filter Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : P455-5058 Pressure range : -172 to 172 mbar(e) -2,5 to 2,5 psig Overpressure (min) : 1,4 bar(e) / 20 psig

1089 0575 23

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

Technical data Common data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Material (main body) : stainless steel, 303 Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temp.: -20°C to 100°C Ambient temp.: -20°C to 70°C Supply voltage (nominal) : 5 V DC ± 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - - Manufacturer model designation and serial number - - Allowed tightening torque

Published by : AIRPOWER STANDARDS DEPARTMENT

en 1089 0575 00 Uitgave / edition

Blad / page

44

2(26)

Article number Distinction data

Type : PE2000-5036 Includes extra EMC-filter Pressure range : -172 to 172 mbar(e) -2,5 to 2,5 psig Overpressure (min) : 1,4 bar(e) / 20 psig

1089 0575 53

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

Technical data Common data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Material (main body) : stainless steel, 304.SS Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temp..: -20 °C to 100 °C Ambient temp..: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Published by : AIRPOWER STANDARDS DEPARTMENT

en 1089 0575 00 Uitgave / edition

Blad / page

44

3(26)

Article number Distinction data

Type : P165-5163 Accuracy : 2 % Includes extra EMC-filter Pressure range : -1 to 5 bar(e) -14,5 to 72,5 psig Overpressure (min) : 10 bar(e) / 145 psig

1089 0575 22

Type : P165-5164 Accuracy : 2 % Includes extra EMC-filter Pressure range : 0 to 25 bar(e) 0 to 363 psig Overpressure (min) : 50 bar(e) / 725 psig

1089 0575 24

Type : P165-5414 Accuracy : ± 0,5 % Pressure range : -1 to 1 bar(e) -14,5 to 14,5 psig Overpressure : 2 bar(e) / 29 psig

1089 0575 32

Type : P165-5439 Pressure range : 0 to 35 bar(e) 0 to 507,7 psig Overpressure (min) : 70 bar(e) / 1015 psig

1089 0575 21

Type : P165-5191 Includes extra EMC-filter Pressure range : 0 to 3 bar(e) Overpressure (min) : 10 bar(e) / 145 psig Proof pressure : 12,5 bar Burst pressure : 16 bar

1089 0575 25

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

Technical data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Common data

en 1089 0575 00 Uitgave / edition

44

Blad / page

4(26)

Article number Distinction data

Material (main body) : stainless steel, 304.SS Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temp..: -20 °C to 100 °C Ambient temp.t.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Type : P165-5245 Includes extra EMC-filter Pressure range : -1 to 10 bar(e) -14,5 to 145 psig Overpressure (min) : 20 bar(e) / 290 psig

1089 0575 26

Material (main body) : stainless steel, 304.SS Sealing material : VITON Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Type : P165-5800 Includes extra EMC-filter Pressure range : -1 to 17 bar(e) -14,5 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig

1089 0575 78 (replaces: 1089 0575 28)

Material (main body) : stainless steel, 304.SS Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temp.: -20 °C to 100 °C Ambient temp.: -20 °C to 70 °C Supply voltage (nominal) : 7 to 30 V DC unregulated Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Type : P165-5525 Accuracy : 2 % Includes extra EMC-filter Pressure range : 0 to 17 bar(e) 0 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig

1089 0575 36

Published by : AIRPOWER STANDARDS DEPARTMENT

GROUP STANDARDS DEPARTMENT ©

en 1089 0575 00

TECHNICAL SPECIFICATION Datum / date

Uitgave / edition

2011-07-25

Technical data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Common data

Blad / page

44

5(26)

Article number Distinction data

Material (main body) : brass, CA 360 Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -30 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Type : P165-5221 Pressure range : 0 to 300 psig 0 to 20,7 bar(e) Overpressure (min) : 41,4 bar(e) / 600 psig

1089 0575 17

Material (main body) : stainless steel, 303 Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temp.: -20°C to 100°C Ambient temp.: -20°C to 70°C Supply voltage (nominal) : 5 V DC ± 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - - Manufacturer model designation and serial number - - Allowed tightening torque

Type : PE2000-5035

1089 0575 52

Published by : AIRPOWER STANDARDS DEPARTMENT

Includes extra EMC-filter

Accuracy at 20°C : 1,25% Includes extra EMC-filter Pressure range : -1 to 5 bar(e) -14,5 to 72,5 psig Overpressure (min) : 10 bar(e) / 145 psig

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

Technical data Common data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Material (main body) : stainless steel, 304.SS Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Published by : AIRPOWER STANDARDS DEPARTMENT

en 1089 0575 00 Uitgave / edition

Blad / page

44

6(26)

Article number Distinction data

Type : P2000-5087 Accuracy : ± 2 % Includes extra EMC-filter Pressure range : 0 to 17 bar(e) 0 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig

1089 0575 51 (Replaces : 1089 0575 41)

GROUP STANDARDS DEPARTMENT ©

en 1089 0575 00

TECHNICAL SPECIFICATION Datum / date

Uitgave / edition

2011-07-25

Technical data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Common data Material (main body) : stainless steel, 304 Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Published by : AIRPOWER STANDARDS DEPARTMENT

Blad / page

44

7(26)

Article number Distinction data

Type : P604-10025 Includes extra EMC-filter Pressure range : -172 to 172 mbar(e) -2,5 to 2,5 psig Overpressure (min) : 1,4 bar(e) / 20 psig New Kaveen CA ASIC design

1089 0575 73 (Replaces : 1089 0575 33)

GROUP STANDARDS DEPARTMENT ©

en 1089 0575 00

TECHNICAL SPECIFICATION Datum / date

Uitgave / edition

2011-07-25

Technical data Common data Material (main body) : stainless steel, 304.SS Sealing material : Buna-N (Nitrile) Protection : IP 67 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

44

8(26)

Article number Distinction data

Type : P165-5511 Accuracy : 2 % Pressure range : +1 to -1 bar(e) +14,5 to –14,5 psig Overpressure (min) : 2 bar(e) / 29 psig

1089 0575 09

Type : P2000-5235 Accuracy : 2 % Includes extra EMC-filter, New venting design Pressure range : 0 to 17 bar(e) 0 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig

1089 0575 65 (Replaces : 1089 0575 45)

New Kaveen CA ASIC design

Published by : AIRPOWER STANDARDS DEPARTMENT

Blad / page

GROUP STANDARDS DEPARTMENT ©

en 1089 0575 00

TECHNICAL SPECIFICATION Datum / date

Uitgave / edition

2011-07-25

Technical data Common data Material (main body) : stainless steel, 304.SS Sealing material : Buna-N (Nitrile) Protection : IP 67 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Blad / page

44

9(26)

Article number Distinction data

Type : P165-… Accuracy : 2 % Pressure range : 0 to 50 bar(e) 0 to 725 psig

1089 0575 37

Type : P2000-5273 Includes extra EMC-filter Pressure range : 0 to 35 bar(e) 0 to 507,7 psig Overpressure (min) : 70 bar(e) / 1015 psig (old designation P2000-5237 changed dd 2008-03-05 lead free component).

1089 0575 58 (Replaces : 1089 0575 38)

New Kaveen CA ASIC design Type : P2000-5239 Includes extra EMC-filter Pressure range : -1 to 17 bar(e) -14,5 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig

1089 0575 59 (Replaces : 1089 0575 39)

New Kaveen CA ASIC design Type : P2000-5238 includes extra EMC-filter Accuracy : 0,5 % Pressure range : -1 to 5 bar(e) -14,5 to 72,5 psig Overpressure (min) : 10 bar(e) / 145 psig

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

New Kaveen CA ASIC design

Published by : AIRPOWER STANDARDS DEPARTMENT

1089 0575 60 (Replaces : 1089 0575 40)

GROUP STANDARDS DEPARTMENT ©

en 1089 0575 00

TECHNICAL SPECIFICATION Datum / date

Uitgave / edition

2011-07-25

Technical data Common data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Material (main body) : stainless steel, 304.SS Sealing material : VITON Protection : IP 67 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Published by : AIRPOWER STANDARDS DEPARTMENT

Blad / page

44

10(26)

Article number Distinction data

Type : P2000-5261 Accuracy : 2 % Includes extra EMC-filter, New venting design Pressure range : -1 to 5 bar(e) -14,5 to 72,5 psig Overpressure (min) : 10 bar(e) / 145 psig New Kaveen CA ASIC design

1089 0575 74 (replaces: 1089 0574 64)

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

Technical data Common data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Material (main body) : 303 Stainless steel Sealing material : Nitrile Media compatibility : Oil, water, air. Operating temper.: -20 °C to 100 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 5 mA Recommended mounting torque: 40Nm Mounting position: pressure port down ±15°

Published by : AIRPOWER STANDARDS DEPARTMENT

en 1089 0575 00 Uitgave / edition

Blad / page

44

11(26)

Article number Distinction data

Type : P2000-5075 Includes extra EMC-filter Pressure range : 0 to 17 bar Burst pressure : 51,7 bar

1089 0575 54

Type : P2000-5076 Includes extra EMC-filter Pressure range : -1to 5 bar Burst pressure : 25 bar

1089 0575 55

Type : P2000-5077 Includes extra EMC-filter Pressure range : -172 mbar to 172 mbar Burst pressure : 4 bar

1089 0575 56

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

Blad / page

44

12(26)

Internal name + designation :

Press. transduc. + Article number

Technical data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Common data Material (main body) : Aluminium alloy, 6013-T651 Finish : electroless nickel plating Connector made of valox 420. Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque - + and – ports

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : P321-5090 Pressure range : 0 to 500 mbar(d) Static pressure : 0 to 4 bar(e) Overpressure (min) : - differential : 2 bar (on + side only)

1089 0575 46

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

Blad / page

44

13(26)

Internal name + designation :

Press. transduc. + Article number

Technical data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Common data Material (main body) : Aluminium alloy, 6013-T651 Finish : electroless nickel plating Connector made of valox 420. Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque - + and – ports

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : P321-5036 Pressure range : 0 to 5 bar(d) Static pressure : 0 to 25 bar(e) Overpressure (min) : - differential : 15 bar (on + side only)

1089 0575 30

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

Blad / page

44

14(26)

Internal name + designation :

Press. transduc. + Article number

Technical data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Common data Material (main body) : Aluminium alloy, 6013-T651 Finish : electroless nickel plating Connector made of valox 420. Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque - + and – ports

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : P321-5034 Pressure range : 0 to 250 mbar(d) Static pressure : 0 to 4 bar(e) Overpressure (min) : - differential : 2 bar (on + side only

1089 0575 29

GROUP STANDARDS DEPARTMENT ©

en 1089 0575 00

TECHNICAL SPECIFICATION Datum / date

Uitgave / edition

2011-07-25

Blad / page

44

15(26)

Internal name + designation :

Press. transduc. + Article number

Technical data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Common data Material (main body) : Aluminium alloy, 6013-T651 Finish : electroless nickel plating Connector made of valox 420. Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque - + and - ports

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : P321-5013 Pressure range : 0 to 3 bar(d) / 0 to 43,5 psid Static pressure : 0 to 25 bar(e) / 0 to 363 psig Overpressure (min) : - differential : 10 bar / 145 psi (on + side only) static : 50 bar(e) / 725 psig

1089 0575 20

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

44

Blad / page

16(26)

Internal name + designation :

Press. transduc. + Article number

Technical data Common data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Material (main body) : Steel, ULTEM 2310 Sealing material : Fluorsilicone Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -40 °C to 100 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque - + and - ports

Article number Distinction data

Type: P321-5108 With adapter plate. Weight 682g max. Pressure range : 0 to 3 bar(d) / 0 to 43,5 psid Static pressure : 0 to 25 bar(e) / 0 to 363 psig Overpressure (min) : - differential : 10 bar / 145 psi (on + side only) static : 35 bar(e) / 507 psig

Type: P321-5108-1 Without adapter plate Weight 354g max. See P321-5108

Published by : AIRPOWER STANDARDS DEPARTMENT

1089 0575 42

1089 0575 43

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

Blad / page

44

17(26)

Internal name + designation :

Press. transduc. + Article number

Technical data Common data Material (housing main body) : ZYTEL 77G33L - Black Media : Air Operating temper.: -40 °C to 125 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC

Article number Distinction data

Type : P4050-5003 Pressure range : 400 to 1100 mbar(e) 5,8 to 15.95 psig Proof pressure : 2.2 bar(e) / 32 psig Burst pressure : 3.3 bar(e) / 48 psig

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Delivered with connector assembly: 181 229-1

Published by : AIRPOWER STANDARDS DEPARTMENT

1089 0575 90

GROUP STANDARDS DEPARTMENT ©

en 1089 0575 00

TECHNICAL SPECIFICATION Datum / date

Uitgave / edition

2011-07-25

Blad / page

44

18(26)

Internal name + designation :

Press. transduc. + Article number

Technical data Common data Type: 2Wire, 4 to 20mA (@10 to 33V DC) Overpressure: 2 x fs Temperature: -25ºC to 80ºC (Temperature compensated) Accuracy: +-0.5% Seal: FPM Viton Thread: G1/4” DIN3852 Form E Inox 1.4305 stainless IP Rating: IP65 Connector: DIN EN 175301-803-C

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Conformity:

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : Y04CM71.00 Sensor+Connector pre-wired with 3m cable Pressure range: 0 to 16 bar.g Cable: 2x0.25mm2 ,3m Insulation: 300V (1200Vp) Terminations: 2 x ferrule

‘C’ = +VDC Connector: DIN EN 175301-803-C

1089 0575 05

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

44

Blad / page

19(26)

OBSOLETE SHALL NOT BE USED IN NEW DESIGN

Technical data Common data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Material (main body) : zinc plated carbon steel Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : P165-5060 Pressure range : 0 to 17 bar(e) 0 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig

1089 0575 01

Type : P165-5061 Pressure range : -1 to 5 bar(e) -14,5 to 72,5 psig Overpressure (min) : 10 bar(e) / 145 psig

1089 0575 02

Type : P165-5063 Pressure range : 0 to 25 bar(e) 0 to 363 psig Overpressure (min) : 50 bar(e) / 725 psig

1089 0575 04

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

44

Blad / page

20(26)

OBSOLETE SHALL NOT BE USED IN NEW DESIGN Technical data Common data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Material (main body) : stainless steel, 304.SS Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing - - Atlas Copco logo and article number - - Manufacturer model designation and serial number - - Allowed tightening torque

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : P165-5162 Accuracy : 2 % Pressure range : 0 to 17 bar(e) 0 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig

1089 0575 11

Type : P165-5163 Accuracy : 2 % Pressure range : -1 to 5 bar(e) -14,5 to 72,5 psig Overpressure (min) : 10 bar(e) / 145 psig

1089 0575 12

Type : P165-5164 Accuracy : 2 % Pressure range : 0 to 25 bar(e) 0 to 363 psig Overpressure (min) : 50 bar(e) / 725 psig

1089 0575 14

Type : P165-5191 Pressure range : 0 to 3 bar(e) verpressure (min) : 10 bar(e) / 145 psig Proof pressure : 12,5 bar Burst pressure : 16 bar

1089 0575 15

Type : P165-5245 Pressure range : -1 to 10 bar(e) -14,5 to 145 psig Overpressure (min) : 20 bar(e) / 290 psig

1089 0575 16

Type : P165-5300 Pressure range : -1 to 17 bar(e) -14,5 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig

1089 0575 18

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

44

Blad / page

21(26)

OBSOLETE SHALL NOT BE USED IN NEW DESIGN

Technical data Common data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Material (main body) : stainless steel, 304.SS Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - - Atlas Copco logo and article number - - Manufacturer model designation and serial number - - Allowed tightening torque

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : P165-5162 Accuracy : 2 % Includes extra EMC-filter Pressure range : 0 to 17 bar(e) 0 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig

1089 0575 41 (Replaced by : 1089 0575 51)

Type : P165-5163 Accuracy : 0,5 % Pressure range : -1 to 5 bar(e) -14,5 to 72,5 psig Overpressure (min) : 10 bar(e) / 145 psig

1089 0575 31 (Replaced by : 1089 0575 40)

Type : P165-5300 Includes extra EMC-filter Pressure range : -1 to 17 bar(e) -14,5 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig

1089 0575 28 (Replaced by: 1089 0575 78)

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

Blad / page

44

22(26)

OBSOLETE SHALL NOT BE USED IN NEW DESIGN

Technical data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Common data Material (main body) : stainless steel, 316L Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : P455-5058 Pressure range : -172 to 172 mbar(e) -2,5 to 2,5 psig Overpressure (min) : 1,4 bar(e) / 20 psig

1089 0575 03

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

Blad / page

44

23(26)

OBSOLETE SHALL NOT BE USED IN NEW DESIGN

Technical data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Common data Material (main body) : zinc plated carbon steel Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque - + and – ports

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : P321-5001 Pressure range : 0 to 3 bar(d) / 0 to 43,5 psid Static pressure : 0 to 25 bar(e) / 0 to 363 psig Overpressure (min) : - differential : 10 bar / 145 psi (on + side only) - static : 50 bar(e) / 725 psig

1089 0575 10

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

Blad / page

44

24(26)

OBSOLETE SHALL NOT BE USED IN NEW DESIGN

Technical data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Common data Material (main body) : stainless steel, 304.SS Sealing material : Buna-N (Nitrile) Protection : IP 67 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : P165-5493 Accuracy : 2 % Includes extra EMC-filter Pressure range : -1 to 5 bar(e) -14,5 to 72,5 psig Overpressure (min) : 10 bar(e) / 145 psig Type : P165-5492 Accuracy : 2 % Includes extra EMC-filter Pressure range : 0 to 17 bar(e) 0 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig

1089 0575 34 (Replaced by : 1089 0575 44)

1089 0575 35 (Replaced by : 1089 0575 45)

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

Blad / page

44

25(26)

OBSOLETE SHALL NOT BE USED IN NEW DESIGN Technical data Common data Material (main body) : stainless steel, 304.SS Sealing material : Buna-N (Nitrile) Protection : IP 67 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Article number Distinction data

Type : P165-5493 Accuracy : 2 % Includes extra EMC-filter, New venting design Pressure range : -1 to 5 bar(e) -14,5 to 72,5 psig Overpressure (min) : 10 bar(e) / 145 psig Type : P165-5492 Accuracy : 2 % Includes extra EMC-filter, New venting design Pressure range : 0 to 17 bar(e) 0 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig Type : P165-5439 Pressure range : 0 to 35 bar(e) 0 to 507,7 psig Overpressure (min) : 70 bar(e) / 1015 psig Type : P165-…. Includes extra EMC-filter Pressure range : -1 to 17 bar(e) -14,5 to 246,6 psig Overpressure (min) : 34,5 bar(e) / 500 psig

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Type : P165-5632 Accuracy : 0,5 % Pressure range : -1 to 5 bar(e) -14,5 to 72,5 psig Overpressure (min) : 10 bar(e) / 145 psig Type : P2000-5236 Accuracy : 2 % Includes extra EMC-filter New venting design Pressure range : -1 to 5 bar(e) -14,5 to 72,5 psig Overpressure (min) : 10 bar(e) / 145 psig

Published by : AIRPOWER STANDARDS DEPARTMENT

1089 0575 44 (Replaced by : 1089 0575 64)

1089 0575 45 (Replaced by : 1089 0575 65)

1089 0575 38 (Replaced by : 1089 0575 58)

1089 0575 39 (Replaced by : 1089 0575 59)

1089 0575 40 (Replaced by : 1089 0575 60)

1089 0575 64 (Replaced by; 1089 0575 74

GROUP STANDARDS DEPARTMENT ©

TECHNICAL SPECIFICATION Datum / date

2011-07-25

en 1089 0575 00 Uitgave / edition

Blad / page

44

26(26)

OBSOLETE SHALL NOT BE USED IN NEW DESIGN

Technical data

Edition check - Lotus Notes data base Standard Documents - GSD - Internet URL http://atlascopco.com/gsd

Common data Material (main body) : stainless steel, 304 Sealing material : Buna-N (Nitrile) Protection : IP 55 Media compatibility : Oil (mineral, screw compressor oil, PAO synthetic), water, air. Operating temper.: -20 °C to 100 °C Ambient temperat.: -20 °C to 70 °C Supply voltage (nominal) : 5 V DC + 0,25 V DC Supply current (nominal) : 4 mA Markings to be applied to the housing : - Atlas Copco logo and article number - Manufacturer model designation and serial number - Allowed tightening torque

Published by : AIRPOWER STANDARDS DEPARTMENT

Article number Distinction data

Type : P604-9710 Includes extra EMC-filter Pressure range : -172 to 172 mbar(e) -2,5 to 2,5 psig Overpressure (min) : 1,4 bar(e) / 20 psig

1089 0575 33 (replaced by 1089 0575 73)