34 0 115KB
Phox Minnow Balsa Magnetic Weight Shift fishing Lure List of tools and materials
3.2mm (1/8”) Balsa wood sheet
Inner sections
.8mm (1/32”)
Centre filler pieces
2.2mm (3/32”)
Outer covers
Hobby/model shops, ebay
6mm (1/4”) Double sided tape Medium thickness super glue
Craft shops,online SHOULD NOT BOND INSTANTLY
any of above
1mm (0.040”) S/steel TIG welding wire for through wire
Welding suppliers, online
1-4lb Fishing line for binding wires
Tackle Box
6mm (15/64”) S/steel ball bearings grade 420 magnetic
online
7.9mm sq (5/16”) Plastruct fineline square tubing STFS-10
Model/RC and hobby shops or online
6mm x 2mm (15/64” x 5/64”) Neodymium Magnets
Craft shops/ online
2mm (0.080”) Polycarbonate clear sheet or Lexan for lip 5-15 Min epoxy for base coat
Craft, hardware shop
Enivrotex Lite Epoxy for clear coating
Hobby/craft shop, online
Acrylic airbrush paints and thinners to suit
as above
4mm Rhinestones for eyes
as above
Tools Metal Ruler or square metal edge Craft knives thick and thin bladed Razor saw or back saw 52tpi
Available through hobby/rc model shops or online
Mitre box or jig for cross cutting balsa 38mmx 38 mm (1 ½” sq) square hardwood for sanding block 100-200grit sandpaper for sanding block 300mm (12”) hacksaw blade for cutting wire slot
Or split into three and glued together to make lip slot cutter Jewellery pliers concave to round for wire forming
from beading/craft shops or online
Wire side cutters Bobbin Holder for thread Whip finishing tool
Fly tying supplies or homemade as above
12.5mm (1/2”) Dowel for forming round over sanding block 12.5mm balsa for round over block Lolly-ice sticks covered in 100-200grit paper Sprung clips and thin plywood for clamping while gluing Jay cloth for wiping on epoxy Gloves Rotating Jig for clear coating, this can be made from a slow turning disco ball motor and a swivel Blow lamp or hair dryer for popping ait trapped in epoxy Airbrush and compressor for painting