35 0 122KB
®® 58000 OLOA OLOA 59766
Additive Package for Gasoline and Diesel Engine Oils Application, Product Summary & Benefits ®
OLOA 58000 is a treat optimized package designed for top ends API licensed categories. ®
®
As a single DI, OLOA 58000 was developed with PARATONE NDOCP technology and GpI base stocks to achieve the latest licensable API categories (from API SJ/CF through API SL/CF) in 10W-30, 15W-40 and 20W-50 viscosity grades. ®
®
In combination with OLOA 58823, OLOA 58000 is licensed against the highest tier API SM and API SN category in appropriate V.I.I and base stocks system. API LEVEL
OLOA 58000 %wt
OLOA 58823 %wt
API SN/SM/CF
6.5
2.05
ACEA A2/B2*
7.8
API SL/CF-4*
7.03
-
API SL/CF
6.5
-
API SJ/CF
5.8
-
Mono
Multi
BN
% mass
% mass
SG/CF
5.22
5.22
6
SF/CF
5.19
5.19
6
SF/CD SF/CC
4.26
4.58
4.9/5.2
SE/CD
4.16
4.58
4.8/5.2
SE/CC
3.43
3.77
3.9/4.3
SC/CC
3.18
3.5
3.6/4
SC/CB SB/CB
1.98
2.18
2.3/2.5
API levels
Note : Other down treat rate apply for lower performances level
The data presented in this bulletin are believed to be accurate; however, Chevron Oronite Company LLC shall not be liable for its content and make no warranty with respect thereto. For additional information contact the regional office: North & South America and Canada 713-432-2500 , Asia Pacific (65) 6867-6557; Europe, Africa & Middle East (33) 1 46 39 36 30 or go to www.oronite.com © 2016 Chevron Oronite Company LLC. All rights reserved. Chevron, the Chevron hallmark, Oronite, OLOA, PARATONE and Adding up are registered trademarks of Chevron Intellectual Property LLC Version – August 24, 2016
®® 58000 OLOA OLOA 59766
Recommended Dosage .
6.5% mass% for API SL/CF and 5.8 mass% for API SJ/CF
VI Improver (VII)
PARATONE® Non-Dispersant OCP
From 1.98% to 5.22% for API obsolete claims
Typical Properties Chemical Calcium, mass/wt% Phosphorus, mass/wt% Zinc, mass/wt% Nitrogen, mass/wt% Sulfated Ash, mass/wt% Base Number, mg KOH/g Molybdenum, ppm
ASTM D 4951/D 4927 ASTM D 4951 ASTM D 4951 ASTM D 5291 ASTM D 874 ASTM D 2896 (ASTM D5185)
4.21 1.18 1.28 0.45 16 114 1400
Physical Specific Gravity, at 15°C Viscosity, mm²/s (cSt) at 40°C Viscosity, mm²/s (cSt) at 100°C
ASTM D 4052 ASTM D 445 ASTM D 445
1.009 2214 112
Handling Please refer to the corresponding material safety data sheet for handling and blending precautions and maximum recommended temperatures.
The data presented in this bulletin are believed to be accurate; however, Chevron Oronite Company LLC shall not be liable for its content and make no warranty with respect thereto. For additional information contact the regional office: North & South America and Canada 713-432-2500 , Asia Pacific (65) 6867-6557; Europe, Africa & Middle East (33) 1 46 39 36 30 or go to www.oronite.com © 2016 Chevron Oronite Company LLC. All rights reserved. Chevron, the Chevron hallmark, Oronite, OLOA, PARATONE and Adding up are registered trademarks of Chevron Intellectual Property LLC Version – August 24, 2016