MR 338 Clio Symbol 7 [PDF]

Zitiervorschau

Trim and upholstery INTERIOR BODY LININGS REAR SEAT FRAMES AND RUNNERS

LB0P - LB03 77 11 203 518

SEPTEMBER 1999

"The repair methods given by the manufacturer in this document are based on the technical specifications current when it was prepared.

EDITION ANGLAISE

All copyrights reserved by Renault.

The methods may be modified as a result of changes introduced by the manufacturer in the production of the various component units and accessories from which his vehicles are constructed."

Copying or translating, in part or in full, of this document or use of the service part reference numbering system is forbidden without the prior written authority of Renault.

© RENAULT 1999

Trim and upholstery Contents Pages

71 B C D

76 A

INTERIOR BODY LININGS Rear quarter panel lining Wheel arch lining Rear wing lining

71-1 71-2 71-3

REAR SEAT FRAMES AND RUNNERS Seat back

76-1

INTERIOR BODY 171LININGS Rear quarter panel lining

71

REMOVAL - REFITTING

16752R

Disconnect the de-icing wiring harness. Carefully pull the lining through the upper section (1). Remove the retaining clips (A). Lift the lining to free it from the slides (B).

71-1

A B

INTERIOR BODY LININGS Wheel arch lining

71

REMOVAL - REFITTING

16753R

Remove: – the ribbed clip (A), – the mounting bolt (B).

71-2

A C

INTERIOR BODY LININGS Rear wing lining

71

REMOVAL - REFITTING

16754R

Remove: – the four retaining clips (A), with the unclipping tool, – the retaining clip (B), with a screwdriver.

71-3

A D

REAR SEAT FRAMES 176 AND RUNNERS Seat back

PRF7601

76

A

16756R

Slide the backrest frame to the top to free the slides (B).

REMOVAL - REFITTING

16755R

Remove the two mounting bolts from the backrest frame (A).

76-1