Motor CAT C13 Acert [PDF]

Zitiervorschau

C13 Industrial Engine KWJ00001-UP(SEBP5572 - 00) - Estructura del documento

Página 1 de 3

Cerrar SIS Pantalla anterior Producto: INDUSTRIAL ENGINE Modelo: C13 INDUSTRIAL ENGINE KWJ Configuración: C13 Industrial Engine KWJ00001-UP

Operación de Sistemas C13 Industrial Engine Número de medio -KENR9312-00

Fecha de publicación -01/11/2010

Fecha de actualización -18/11/2010

i04082549

Electronic Control System Components SMCS - 1900

Illustration 1

g02327479

Left side view of engine

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 11/30/2011

C13 Industrial Engine KWJ00001-UP(SEBP5572 - 00) - Estructura del documento

Página 2 de 3

(1) Crankcase oil pressure sensor (2) Boost pressure sensor (Air inlet manifold) (3) Barometric pressure sensor (Atmospheric pressure) (4) Pressure sensor (Fuel differential) (5) Pressure sensor (NOx reduction system NRS intake) (6) Pressure sensor (Engine oil) (7) Temperature sensor (Charge air cooler outlet) (8) Speed sensor (Crankshaft) (9) Speed sensor (Camshaft)

Illustration 2

g02327774

Right side view of engine (10) Coolant temperature sensor

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 11/30/2011

C13 Industrial Engine KWJ00001-UP(SEBP5572 - 00) - Estructura del documento

Página 3 de 3

(11) Fuel pressure sensor (12) Fuel temperature sensor

The electronic control system has the following components: 

Electronic Control Module (ECM)



Pressure sensors



Temperature sensors



Speed/Timing sensors



Solenoids

The ECM functions as the governor for the engine. The ECM modulates the quantity of fuel and injection timing in order to govern the engine. The ECM can activate the following starting aids: 

Ether injection



Cycling of injector solenoids

The ECM will provide the operator with an illuminated warning light if the engine senses an engine problem. The operator may also experience an engine derate. The warning light or the engine derate could turn off during engine operation. The diagnostic code will be logged in the ECM. The diagnostic code can then be diagnosed at a later time. The ECM is password protected in order to secure calibration of the ECM and customer programmed information. The calibration can be adjusted with flash files by authorized dealers. The flash file is programmed into the personality module.

Copyright 1993 - 2011 Caterpillar Inc. Todos los derechos reservados. Red privada para licenciados del SIS.

Wed Nov 30 08:03:21 UTC-0430 2011

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 11/30/2011