Jsa For DG Operation PDF [PDF]

Zitiervorschau

JOB SAFETY ANALYSIS

Job:

Date:

Document No.

Diesel Generator Operation in new location

27-07-2020

Title of person doing the job: Engineer/Supervisor

JSA Team (DANEM):

Organization: Danem Energy Oil & Gas FZCO

Approved by SEOT:

Required Personal Protective Equipment (PPE): Hard Hat, Safety Shoes, Safety Goggle, Hand Gloves, High Visibility Safety Jacket, Chin Strap, Face Mask BASIC JOB STEPS POTENTIAL HAZARDS

SAFE CONTROLS/PROCEDURES

Pre – Work/ Obtaining Authorization

Non-compliance of SEOT HSSE Management System & Procedures

  

Ensure SEOT/DANEM site Safety Induction. Ensure familiarization with SEOT Life Saving Rules. Ensure familiarization with SEOT Golden Rules

Unauthorized area, work



Ensure to obtain all required permits (Vehicle Entry, Hot Work..) prior to the work

COVID – 19 Prevention and Control



Follow all guidelines regarding COVID-19 issued by DHA and Trakhees Always wear Face mask and hand gloves Maintain Social distancing (At least 2 meters) at all times Please report immediately to the concerned if you are experiencing symptoms of flu (Fever, dry cough, tiredness...)

  

QF-HSSE-030

JOB SAFETY ANALYSIS Working In Heat



Heat Stress

     



Mobilization of DG, operatives and tools

Unsafe driving

    

Falling Objects

 

Manual Handling

 

Wear appropriate clothing (lightweight, light-colored, loosefitting, cotton) and carry a water container with you of at least 1-2 liters to fill regularly drink at least 2 liters of water every 2-3 hours Add a little more salt to meals in summer to replace salt lost in sweat Self-pace your work – do not push your body beyond its limits Avoid drinks with caffeine, alcohol, or large amounts of sugar Monitor employees who are at risk of heat stress Take more breaks in extreme heat and humidity, take breaks in the shade or a cool area when possible Monitor your physical condition and that of your co-workers.

Weight of DG : 1.7 T Capacity of Boom Truck :3T Follow SEOT road rules, speed limits and signage Valid UAE driving license Trained Flagman should be available to escort the boom truck

Proper stacking and securing of DG on the truck Usage of lashing belts

Use competent manual handling techniques Ensure Adequate number of people are available for QF-HSSE-030

JOB SAFETY ANALYSIS

 

Slip, Trip and Fall

   

Positioning of Diesel Generator

Uneven/Non-compacted ground

  

Collision / Obstruction / Poor Cable management

   



DG Operation

Electric Shock / Burns

  

the task Ensure Competent supervision Ensure proper hand protection Ensure pathways are clear from obstructions Ensure cables are not lying on the ground Ensure cables are not interfering with access ways Ensure proper stacking and storing of tools

Proper visual inspection by the engineer Proper ground support for DG Ensure equipment is operated on a stable, level surface

Barricade the area and provide appropriate signage Keep safe distance from nearby plant structures and road Ensure proper cable management Ensure cables are routed properly, without obstructing pathways, pipe lines or plant equipments Ensure DG is not obstructing any existing pathways

Always shut down machine before carrying out any inspections or adjustments Inspect cables and connections for damage Do not operate with wet QF-HSSE-030

JOB SAFETY ANALYSIS



  

Fire / Explosion

  

 

 

Fuel Spillage

   

hands, in wet or damp areas and avoid inclement weather Ensure to put barrier around the DG and ensure safe distance from the work areas Ensure proper grounding and ELCB are in place Wear hand gloves when operating DG Allow engine to cool before attempting any maintenance

Stop engine before refueling Ensure the fuel cap is properly secured after refueling Ensure to put barrier around the DG and ensure safe distance from the work areas. Carry out visual Checks for fuel leaks and repair before operation Ensure to provide fire watch and fire extinguisher. Continuous gas monitoring should be done to monitor flammable gas levels DG should be equipped with spark arrestor Keep flammables away from the engine

Ensure equipment is operated on a stable, level surface Ensure to check machine daily for fuel and oil leaks Switch engine off before refueling and make sure fuel cap is replaced Dip tray should be placed to prevent soil contamination by QF-HSSE-030

JOB SAFETY ANALYSIS accidental spills  Hazardous substances   

Wear ear protection when operating DG



All moving parts should be protected with guards or covers. Do not remove guards or covers. Maintenance or repairing should be done by competent personnel only

Noise

Contact with moving parts



Recommendations Mid-day break shall be taken from 12.30pm to 03.00 pm

Rest shelter and drinking water shall be provided as nearest to the work place ,supervisor shall be ensure workers are getting plenty of water and required rest Emergency procedures, nearest assembly point, wind sock and eye wash shower shall be identified and Familiarize work crew during TBT. SEOT Rest shelter, drinking water and ablution facility shall be used by the crew.

Operate DG in well ventilated area, never run DG indoors Monitor levels of CO emitted from DG by continuous gas monitoring Never place DG near doors, windows or vents

Remarks / Justifications As per Ministerial Decision No. (587) of 2009 and (26) of v2009 regarding working hours in the Sun To prevent the dehydration and other heat stress symptoms This can be make positive response and safe actions in case of emergency. Prior approval shall be obtained from SEOT.

QF-HSSE-030