Iso 9712 PDF [PDF]

Zitiervorschau

ISO 9712/AC1:2006 2006-11

Ce document est à usage exclusif et non collectif des clients Normes en ligne. Toute mise en réseau, reproduction et rediffusion, sous quelque forme que ce soit, même partielle, sont strictement interdites. This document is intended for the exclusive and non collective use of AFNOR Webshop (Standards on line) customers. All network exploitation, reproduction and re-dissemination, even partial, whatever the form (hardcopy or other media), is strictly prohibited.

Boutique AFNOR Pour : SOCOMENIN SA Client 99062100 Commande N-20100823-420593-TA le 23/08/2010 02:03

Boutique AFNOR pour : SOCOMENIN SA le 23/08/2010 02:03

ISO 9712/AC1:2006 2006-11

INTERNATIONAL STANDARD ISO 9712:2005 TECHNICAL CORRIGENDUM 1 Published 2006-11-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION

• МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ

•

ORGANISATION INTERNATIONALE DE NORMALISATION

Non-destructive testing — Qualification and certification of personnel TECHNICAL CORRIGENDUM 1 Essais non destructifs — Qualification et certification du personnel RECTIFICATIF TECHNIQUE 1

Technical Corrigendum 1 to International Standard ISO 9712:2005 was prepared by Technical Committee ISO/TC 135, Non-destructive testing, Subcommittee SC 7, Personnel qualification.

Page 11, Table 2 Replace the last paragraph of Footnote “b” with the following, thereby correcting the cross-reference from Table 1 to the table itself: “In all cases, the candidate shall be required to show that, for each of the test methods for which he seeks certification, he has at least half of the required time according to this table.”

ICS 03.100.30; 19.100 © ISO 2006 – All rights reserved Published in Switzerland

Ref. No. ISO 9712:2005/Cor.1:2006(E)