Frank's International Tool Catalog W. Table of Contents - January 2019 PDF [PDF]

Zitiervorschau

Product Catalog

Rev. 1/2019

TABLE OF CONTENTS Well Architecture & Tubular Running Services

14 Inch Mega Elevator

41

- Tongs & Cassettes

Landing String Equipment

42-43

Dual String Tong

4

Inner String Spider

44

7 5/8 Inch Electric Tong

5

COBRA™ Control Line Manipulator Arm

45

7 5/8 Inch Tong with Integral Backup

6

Cantilever COBRA™

46

FLUID GRIP® System

7

Clamp-Type Elevator

47

FLUID GRIP® Remote Tong System

8

Inline Safety Fuse

48

Genesis 7000™ Remote Tong System

9

Backpacker™ Compensator System

49

14 3/8 Inch Remote Tong System

10

HORSESHOE® Single Joint Elevator

50

RXT-20 Tong and XXT-25 Backup RTS Carriage

11-12

HORSESHOE® Casing Elevator

51

XT-22 Power Tong

13

500-ton Completions Elevator

52

XT-24 Power Tong

14

Slip Type Center Latch Elevator

53

RTS-H Cassette

15-16

250-ton Slip-Type Elevator & Split Bushing Spider

54-55

Tong Hanging Frame

17

ICE™ Tool Increased Compatibility Elevator

56

Belt Tong

18-19

Door Style Clamp Type Elevator

57

Manual Tongs

20-21

- Top Drive Casing Running Tools (CRTs)

CYCLONE™ Drillpipe Tong

22

Top Drive Casing Running Tool FA-1®

58-61

4 1/2-inch Tubing Tong

23

Top Drive Casing Running Tool FX350

62-63

14-inch High Torque Tong

24

Top Drive Casing Running Tools FX500-600

64-65

18-inch High Torque Tong

25

Torque Activated Wedge Grip (TAWG® Tool)

66-67

21-inch Casing Tong

26

FX-TAWG™ Tool

68

Scissor Lift Tong Positioning System

27

- Specialty Tools/Casing Accessories

- Spiders/Elevators/Handling Tools

DATA TREK® Advantage Computer System

69

10-ton Automated Single Joint Elevator

28

Wireless Torque Sub

70

Jet String™ Elevator

29

DISPLAY Digital Application

71

Collar Load Support (CLS™) System

30

Consolidated Control Console

72

CLS™ for Stands

31

FC-1™ Fill-up and Circulating Tool

73

EXTENDED RANGE™ Split Bushing Spider

32

Clamp-on Single Joint Manipulator

74

EXTENDED RANGE™ Single Joint Elevator

33

STAB-RITE™ Pipe Positioning System

75-76

EXTENDED RANGE™ Slip Type Elevator

34

Sheaveless COBRA™ Control Line Manipulator Arm

77

RS-250 Rotary Spider

35

Manufactured Bowls & Slips

78

RS-350 Long Stroke Spider

36

High Capacity Bails

79

1000-ton Drilling Spider

37

Tong Pusher Arm

80

500-ton Hydraulic Control Line Spider (HCLS500)

38

Anaconda® Premium Rack Back Thread Protector

81

750-ton Hydraulic Control Line Slider (HCLS750)

39

11 7-8 Inch Mega Spider

40

TABLE OF CONTENTS- continued - Power Units Dual Electric Power Unit

82-83

Hydraulic Distribution Module

84

Drilling Technologies CBI™ Cutting Bed Impeller

85

HI Tool® Harmonic Isolation Tool

86

DSTR™ Drill String Torque Reducer Sub

87

SHARK BITE® Anti-rotation Device

88

VERSAFLO™ Tool

89-90

Tubulars & Connectors Xtreme3™ Connector

91-92

Blackhawk Specialty Tools 6 5/8 Inch Wireless Top Drive Cement Head

93-94

SKYHOOK™ Wireless Cementing Line Make Up Device

95-96

Centralizer Sub

97

ULTRASEAL™ Auto-fill Float Equipment

98-99

BRUTE® Packer

100-101

Cast Iron Cement Retainers

102-103

Cast Iron Bridge Plug

104-105

Dual String Tong Key Benefits and Features • Can be configured with conventional 2-die or wrap-around inserts as well as Frank's FLUID GRIP® technology • High efficiency axial piston motor insures consistent high torque capabilities and facilitates a hydraulic speed control that eliminates the need to shift gears • Torque monitoring provided through a hydraulic load cell or with Frank's DATA TREK® Advantage data acquisition system • Both the conventional and FLUID GRIP® models of the Dual String Tong incorporate Frank’s ZERO SIDE LOAD™ back-up technology • Ability to run dual completions from one side by swallowing near coupling with DEEP-brand back-up design Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Pipe Size Range

2 1/16 inches - 3 1/2 inches

Height

72 inches

Length

45 inches

Width

25 inches

Tong Weight, Including Backup

1,500 pounds

Maximum Torque (constant)

7,500 pounds

Operating Pressure Flow

3,000 pounds per square inch 24 - 30 gallons per minute

Low Speed

1 revolution per minute

High Speed

30 revolutions per minute at 30 gallons per minute

franksinternational.com

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/18

page 4

7 5/8 Inch Electric Tong Key Benefits and Features • Electronically preset torque and speed for casing connections • Torque turn graphs can be monitored and saved via Frank’s Data Trek® computer and software • Tong can be operated remotely with hand-held controls • A hydraulic power unit is no longer required for drilling operations, saving rig space, negating power unit transportation concerns, and eliminating possible spillage of hydraulic fluid

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Output

High Gear

Low Gear

Torque - 2,500 foot-pounds Speed - 35 revolutions per minute Torque - 28,000 foot-pounds Speed - 6 revolutions per minute

Supply Requirements

Electrical Supply Air Supply

3 phase, 480 volts alternating current, 54 amps 80 pounds per square inch

General Specifications

Weight

1,420 pounds

Handle Length Grip Range Overall Dimensions

39 inches 7 5/8 inches to 4 1/2 inches 29 inches wide x 56 inches long x 44 inches tall

franksinternational.com

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/18

page 5

7 5/8 Inch Tong with Integral Backup Key Benefits and Features • Optimized camming system • Optimal integral back-up • Built tough: heavier bearings, case, gears, and shafts • Meets rigid quality control standards

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Frank’s engineers and manufactures power tongs to meet the strict criteria of our customers. Frank’s inventories over 3,000 hydraulic power tongs in different models, sizes, and torque capacities, ranging from tubing sizes up through 36 inch casing size. All Frank’s tongs are equipped to work in conjunction with the DATA TREK® Advantage, our Torque Turn monitoring system, as well as the Interlock System for safety, and may be equipped with integral back-ups.

Specifications High Gear Max RPM/Max Torque

Low Gear Max RPM/Max Torque

7 5/8 Inch Tong

114 RPM 4,000 ft-lbs

7.5 RPM 20,000 ft-lbs

7 5/8 Inch High Torque Tong

60 RPM 5,600 ft-lbs

11.3 RPM 30,000 ft-lbs

Model

franksinternational.com

Handle Length

Weight (without Back-up)

Weight (with Back-up)

Pipe Range

39 inches

1,275 pounds [578 kilograms]

N/A

2 7/8 inches 7 3/4 inches

39 inches

1,300 pounds [590 kilograms]

2,250 pounds [1,020 kilograms]

2 7/8 inches 7 3/4 inches

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 3 - 02/17

page 6

FLUID GRIP® System Key Benefits and Features • The FLUID GRIP® System is a proprietary non-metallic and truly non-marking gripping system for making up CRA tubulars • Gripping system enables 360° of contact around the tube body, conforming to the individual tube shape, thereby reducing stress, distortion, and galling • Die penetration marks are completely eliminated • No work hardening of material • Built-in safeguards prevent pressurization of the system, unless the FLUID GRIP® housing is properly closed and latched • Complementary Frank’s equipment includes the Collar Load Support (CLS™) handling systems for a completely non-marking tubular running and handling system

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

For years, running expensive, corrosion-resistant, alloy tubulars without causing damaging die marks was a problem. Conventional gripping systems with metal dies create damaging indentations, which reduce wall thickness and create stress concentrations, and accelerate corrosion. Tube body failures frequently occur in these areas. To solve these problems, Frank’s developed the FLUID GRIP® system in 1989. While others may offer low-marking systems, the FLUID GRIP® tong offers a truly non-marking and field-proven solution.

Specifications Housing Size

Torque Capability*

5 3/4 inches

20,000 ft-lbs

8 3/4 inches

30,000 ft-lbs

12 inches

60,000 ft-lbs

*Factors affecting total torque capability include, but are not limited to: pipe diameter being gripped, energizing pressure used during operation, pipe condition, and condition of friction media applied to ID of gripper bushing.

franksinternational.com

Grippers Released

Grippers Energized

Size Specific Bushings Expandable Gripper Hydraulic Pressure Port

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 7 Rev. 4 - 02/18

FLUID GRIP® Remote Tong System Key Benefits and Features • Remote controlled operation of Frank's FLUID GRIP® technology allows our operator and personnel to operate the system from a safe distance from the rotary and red zone • Non-metallic and truly non-marking gripping system completely eliminates die penetration to reduce corrosion on completion tubing • Provides an even distribution of gripping pressure around the tube body and conforms to the tube shape to reduce stress, distortion, and galling • Frank's complementary Collar Load Support (CLS™) handling system allows for a complete non-marking tubular running and handling system • Frank's remote controlled FLUID GRIP® modular cassette integrates into Frank's wide track carriage system to quickchange the tong cassette and accommodate a wide range of casing and rubing sizes

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

For years, running expensive, corrosion-resistant, alloy tubulars without causing damaging die marks was a problem. Conventional gripping systems with metal dies create damaging indentations, which reduce wall thickness and create stress concentrations, and accelerate corrosion. Tube body failures frequently occur in these areas. To solve these problems, Frank’s developed the FLUID GRIP® system in 1989. While others may offer low-marking systems, the FLUID GRIP® tong offers a truly non-marking and field-proven solution.

Specifications Housing Size

Torque Capability*

8 3/4 inches

Up to 30,000 ft-lbs

*Factors affecting total torque capability include, but are not limited to: pipe diameter being gripped, energizing pressure used during operation, pipe condition, and condition of friction media applied to ID of gripper bushing.

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 8 Rev. 1 - 06/17

Genesis 7000™ Remote Tong System Key Benefits and Features • Equipped with Frank’s Safety Door Interlock system • Remote operation enhances safety by removing personnel away from the well center • Quickly converts from casing mode to drill pipe landing string by adjusting the separation distance between the tong and backup • System design allows for single lift of the entire system to the rig floor • The modular rail system enables the Genesis 7000 to be positioned on various rig floor layouts/sizes • Compatible with Frank’s Data Trek® Advantage Data Acquisition System • Unique tong suspension system compensates for thread loss during make-up • Carriage design provides tong with 50 inches of vertical travel • Tong cage plate alignment indicator for fast tong removal • Requires rig air supply for control system Use in the following applications:

Deepwater and ultra-deepwater

The Genesis 7000™ is a portable stand alone tong system that is capable of accepting cassettes equipped with various Frank’s model tongs. This enables the system to accommodate pipe sizes 3 1/2 inches through 14 3/8 inches and is Fluid Grip® capable 12 inches through 4 1/2 inches.

Specifications Length

100 inches

Width

78 inches

Height

112 inches

Weight

12,500 pounds

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 9

14 3/8 Inch Remote Tong System Key Benefits and Features • Equipped with Frank’s Safety Door Interlock System • Remote operation enhances safety by removing personnel away from the well center • Quickly converts from casing mode to drill pipe landing string by adjusting the separation distance between the tong and backup • System design allows for single lift of the entire system to the rig floor • The modular rail system enables the 14 3/8 inch Remote Tong System to be positioned on various rig floor layouts/ sizes • Compatible with Frank’s DATA TREK® Advantage Data Acquisition System • Unique tong suspension system compensates for thread loss during make-up • Carriage design provides tong with 50 inches of vertical travel • Tong cage plate alignment indicator for fast tong removal • Requires rig air supply for control system Use in the following applications:

Deepwater and ultra-deepwater

The 14 3/8 Inch Remote Tong System is a portable stand alone tong system that is capable of accepting cassettes equipped with various Frank’s model tongs. This enables the system to accommodate pipe sizes 3 1/2 inches through 14 3/8 inches and is FLUID GRIP® capable 4 1/2 inches through 12 inches.

Weight

Torque High Gear/Low Gear

Max Speed

Casing Range

100 inches x 78 inches x 112 inches

12,500 pounds

N/A

N/A

N/A

14 3/8 Tong Cassette Module*

90 inches x 54 inches x 90 inches

6,700 pounds

11,000 ft-lbs / 70,000 ft-lbs

23.1 rpm

7 inches - 14 3/8 inches

7 5/8 Tong Cassette Module**

90 inches x 54 inches x 90 inches

3,900 pounds

5,600 ft-lbs / 30,000 ft-lbs

101 rpm

4 inches - 7 5/8 inches

4 1/2 Tong Cassette Module***

87 inches x 54 inches x 93 inches

5,3000 pounds

2,700 ft-lbs/ 12,000 ft-lbs

50 rpm

2 1/16 inches - 4 1/2 inches

Model

Remote Tong Carriage

Dimensions (LxWxH)

franksinternational.com

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/18

page 10

RXT-20 Tong and XXT-25 Backup RTS Carriage Key Benefits • Super high torque with maximum make-up and break-out torque of 300,000 foot-pounds • Built in slippage sensor for safe operation • Separation* between tong and backup is adjustable from 21.2 inches to 30 inches

Key Features • Available for tubular size from 12.575 inches to 20 inches OD • Remote control for safer and easier rig operations environment • Three speed selection including Low, Medium, and High • Carriage is integrated with a riser tong cassette and driven forward and backward on the rail to the well center by two hydraulic motors, and provides a means to adjust the elevation of the cassette with hydraulic cylinders • Riser tong cassette can alternatively be used with a tong pusher arm if necessary

Use in the following applications:

Deepwater and ultra-deepwater

* Separation is measured from distance between the midpoint of tong and backup dies. Tong die is 6 inches tall and backup die is 5 inches tall.

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 11

RXT-20 Tong and XXT-25 Backup RTS Carriage

Specifications Speed

Max Torque

Max Speed

Continuous Torque

High

45,000 ft-lbs

4.2 rpm

Yes

Medium

175,000 ft-lbs

1.3 rpm

Yes

Low

300,000 ft-lbs

0.76 rpm

No

Use in the following applications:

Deepwater and ultra-deepwater

franksinternational.com

Mid-water Deepwatershelf and ultra-deepwater

Land

For more information call 1-800-833-7265

©2017Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 12

XT-22 with Backup Key Benefits and Features • Local control or remote control • Hydraulic shift • Torque measurement with hydraulic load cell and/or DATA TREK® Advantage Torque Turn Monitoring System • Zero side load reaction system eliminates side load and bending during connection makeup • Can be used with Frank's Tong Pusher Arm (TPA) with optional Remote Tong System (RTS)

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Frank’s designs and manufactures power tongs to meet the strict criteria of our customers. Frank’s inventories over 3,000 hydraulic power tongs in different models, sizes, and torque capacities, ranging from tubing sizes up through 38 inch casing size. All Frank’s tongs are equipped to work in conjunction with the DATA-TREK®, as well as tong door Interlock system for safety, and may be equipped with integral backups.

Specifications Size Range

11 7/8 inches - 22 inches

High Gear RPM/Torque

19.2 / 7,000 ft-lbs [9,500 Nm]

Low Gear RPM/Torque

2.1 / 112,000 ft-lbs [152,000 Nm]

Weight

6,800 pounds [3,085 kilograms]

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 13

XT-24 with Backup Key Benefits and Features • Local control or remote control • Hydraulic shift • Torque measurement with hydraulic load cell and/or Data-Trek® Advantage Torque Turn Monitoring System • Zero side load reaction system eliminates side load and bending during connection makeup • Can be used with Frank's Tong Pusher Arm (TPA) with optional Remote Tong System (RTS)

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Frank’s designs and manufactures power tongs to meet the strict criteria of our customers. Frank’s inventories over 3,000 hydraulic power tongs in different models, sizes, and torque capacities, ranging from tubing sizes up through 38 inch casing size. All Frank’s tongs are equipped to work in conjunction with the DATA-TREK®, as well as tong door Interlock system for safety, and may be equipped with integral backups.

Specifications Size Range

12 1/2 inches - 24 inches

High Gear RPM/Torque

19 1/4 / 18,000 ft-lbs [24,400 Nm]

Low Gear RPM/Torque

2 / 110,000 ft-lbs [149,100 Nm]

Weight

7,400 pounds [3,360 kilograms]

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 14

RTS-H Cassette Interfaced to NOV MPT-200 Key Benefits and Features • Modular Cassette System can be installed into carriage in minutes • The use of NOV’s HYDRATONG™ carriage provides tie-in to the rig’s ZMS system and ESD • Self-contained air-over-hydraulic cassette controls operate independently from rig’s control systems • Compatible with Frank’s DATA TREK® Torque Turn Monitoring System • Compatible with Frank’s Integrated Control System for torque-hold required connections • 14 3/8-inch cassette provides variable separation distance between tong and backup to accommodate casing and drill pipe landing string connections • A 7 5/8-inch Jaw Reducer Kit can be installed in the 14 3/8-inch tong to run smaller pipe sizes with standard 7 5/8-inch tong jaws, or to install the 8 3/4-inch FLUID GRIP® for use on CRA tubulars

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

The RTS-H cassette is a special development of the original RTS product line, designed specifically for use with NOV’s HYDRATONG MPT-200 modular iron roughneck system.

The rig supplies the hydraulic power to the cassette via the HYDRATONG service loop. The pneumatic RTS tong control console is connected to the cassette via a multi-conductor umbilical.

The system is capable of making up and breaking out a large range of pipe sizes using three tong cassette modules to accommodate sizes ranging from 22- to 4 1/2 -inches. The self-contained system supports the Frank's 7 5/8-, 14 3/8-, and 22-inch Casing Tong Cassettes. The larger cassette employs an adapter carriage to allow the heavy tong to be managed by the rig's iron roughneck. The RTS-H cassettes hook into the rig’s MPT-200 Carriage system, which is used to transport the cassette on/off the tubular. The HYDRATONG is available in two rail widths, and the Frank’s cassette systems can accommodate either.

The driller controls the HYDRATONG / cassette positioning, thereby maintaining the ZMS and ESD functionality, while the tong operator controls the cassette’s tong and backup functions. The HYDRATONG can be driven to and from the well center on the rails, and be decelerated to a stop at the programmable well center. Vertical adjustment for the smaller cassettes is controlled by the HYDRATONG.

franksinternational.com

When the XT-22 cassette system is installed, a Frank's Adapter Carriage provides the vertical height adjustment of the heavier cassette.

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 15 Rev. 2 - 02/17

RTS-H Cassette Interfaced to NOV MPT-200 Overall dimensions (lxwxh)

XT-22 RTS Cassette with XT-22 RTS-H Adapter

14 3/8 - in 7 5/8 - in RTS-H Cassette RTS-H Cassette

105-in x 63-in x 96-in

90-in x 54-in x 90-in

85-in x 54-in x 90-in

8,500 lbs

6,700 lbs

5,500 lbs

High gear

18,000 ft-lbs

11,000 ft-lbs

5,600 ft-lbs

Low gear

100,000 ft-lbs

70,000 ft-lbs

30,000 ft-lbs

Maximum speed

9.5 rpm

17 rpm

Casing Size range

1

Cassette weight

Torque

30 rpm

3

1

13 /4- to 22-in 7- to 14 /8- in 4 /2- inches to 7 5/8- in

Additional features Use in the following applications:

franksinternational.com

Deepwater and ultra-deepwater

Optional FLUID GRIP® available Shelf

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 16 Rev. 2 - 02/17

Tong Hanging Frame (THF) Key Benefits and Features The Frank's International Tong Hanging Frame (THF) is an automated tong control system that improves safety and reduces operation time by removing personnel from the rig floor. • Allows for wireless, remote, and manual operation of Frank's power tongs • Improves safety by removing the need for an operator in the red zone • Adjustable track width, 55 inches [1,400 millimeters] to 90 inches [2,300 millimeters] • Hydraulic thread compensation system • Lift cylinder with 51-inch [1,300 millimeter] stroke • Can be driven on its own tracks or adjusted to suit rig-specific iron roughneck tracks • Can be shipped with tong installed and located on its own tracks to reduce the number of lifts, saving time and money

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Dimensions

Tong Compatibility 7 5/8 inch Tong With Backup

Wirelessly Operated Remotely Operated Manually Operated

14 inch Tong With Backup

Wirelessly Operated Remotely Operated Manually Operated

14 3/8 inch Tong With Backup

Wirelessly Operated Remotely Operated Manually Operated

XT-21 Tong With Backup

Wirelessly Operated Remotely Operated Manually Operated

XT-22™ Tong With Backup

Wirelessly Operated Remotely Operated Manually Operated

franksinternational.com

Weight

5,940 pounds [2,700 kilograms]

Overall Length

91 inches [2,314 millimeters]

Overall Width

59 inches [1,489 millimeters] minimum 104 inches [2,631 millimeters] maximum

Overall Height

93 inches [2,365 millimeters] minimum 155 inches [3,933 millimeters] maximum

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 03/17

page 17

Belt Tong Key Benefits and Features • Belt will not break apart, even when over-torqued • Non-stretch belt cords - belt does not store energy • Reduces personnel on the floor - only two technicians required to operate tong • Minimizes marking on pipe, leaving minimal die marks • High torque capacity - up to 110,855 foot-pounds on 36 inch pipe when using SCT3672 • Constant tong balance, as tong stays level whether open or closed • Ratchets easily via single hand operation • Fast operation - 10 pound belt deploys and latches in seconds

Use in the following applications: Model

Deepwater and ultra-deepwater

Shelf

Land

Size Range

SCT 614H

6 inches - 14 inches

SCT 1020

9 5/8 inches - 20 inches

SCT 1020H

9 5/8 inches - 20 inches

SCT 1838

18 inches - 38 inches

SCT 2036

18 inches - 38 inches

SCT 3672

36 inches - 72 inches

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 18

Belt Tong Specifications Model

Size Range

SCT 614H

6- to 14-in.

SCT 1020

9 5/8 inches - 20 inches

SCT 1020H

9 5/8 inches - 20 inches

SCT 1838

18 inches - 38 inches

SCT 2036

18 inches - 38 inches

SCT 3672

36 inches - 72 inches

SCT 6144

6- to 14-in.

SCT 1020

9 5/8- to 20-in.

SCT 1020H

9 5/8- to 20-in.

SCT 1838

18- to 38-in.

SCT 2036

18- to 38-in.

SCT 3672

36- to 72-in.

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

page 19

Wrap-around Manual Tongs Key Benefits and Features • Provides nearly 270° of die contact around the tubular being gripped • Dramatically reduce the amount of die marking on the pipe body, due to the large amount of die contact, making them ideal for use on CRA materials • Steel and aluminum die designs available

Use in the following applications:

Deepwater and ultra-deepwater

franksinternational.com

Shelf

Land

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 20

Manual Tong Specifications Model

Torque Capacity

Pipe Size Range*

F-25

25,000 ft-lbs

1- to 2 7/8 -in

F-65

25,000 ft-lbs

2 3/8- to 6 5/8-in

F-85

35,000 ft-lbs

6 5/8- to 8 5/8-in**

F-120

35,000 ft-lbs

8 3/4- inches to 12-in

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

* Any OD tubular within the range listed above can be gripped with special dies upon request. Extra lead time required for special OD dies. Common pipe and coupling sizes normally available. **F-85 x F-65 die adapter available that will allow the F-85 model to run the pipe sizes listed under the F-65 model.

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 21

CYCLONE® Drillpipe Tong Remote Tong System (RTS) Key Benefits and Features • 150,000 foot-pounds of torque in both make and break directions • 270 degrees of rotation • CYCLONE® carriage can easily interface with Frank's 7 5/8 inch and 14 3/8 inch casing tong cassettes • 2,000 foot-pounds of torque spinner output - can spin out triples of 8 1/4 inch drill collars • 3,000 psi hydraulic operating pressure • Tong and spinner have Zero Side Load torque reactions on the connection • Dual grip force on backup, reduced force while spinning up and increased force when applying final torque • Drillpipe cassette system can be equipped with stabber or centralizer to aid in pipe handling • Capable of monitoring torque hydraulically or electronically • Remotely operated via pneumatic control panel • Spinner has a variable speed function to aid in make up of specialty drill string accessories • CYCLONE® vertical travel height capabilities enable make ups and break outs up to 8 feet

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Specifications Size Range

4 1/2 inches - 10 inches

Dimensions

96 inches long 75 inches wide 112 inches high

Weight

19,000 pounds [8,618 kilograms]

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1 - 03/17

page 22

4 1/2-inch Tubing Tong Key Benefits and Features • Optional integral back-up • Equipped with Frank's proprietary safety door interlock system • Capable of torque measurements with Frank's DATA TREK® Advantage torque turn monitoring system and/or hydraulic load cell • Can be used with Frank's Tong Pusher Arm (TPA)

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications High Gear RPM/Torque

50 @ 2,700 foot-pounds

Low Gear RPM/Torque

11.5 @ 15,000 foot-pounds

Handle Length Weight Size Range

franksinternational.com

24 inches 1,150 pounds [522 kilograms] tong only 2,200 pounds [998 kilograms] with backup 2 1/16 inches - 4 3/4 inches

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1 - 11/17

page 23

14-inch High Torque Tong with Integral Backup Key Benefits and Features • Equipped with Frank's proprietary safety door interlock system • Local or remote control operations • High and low speed selection • Capable of torque measurements with Frank's DATA TREK® Advantage torque turn monitoring system and/or hydraulic load cell • Can be used with Frank's Tong Pusher Arm (TPA)

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications High Gear RPM/Torque

65 @ 8,000 foot-pounds

Low Gear RPM/Torque

9 @ 44,000 foot-pounds

Handle Length Weight

41 inches 1,900 pounds [862 kilograms] tong only 3,300 pounds [1,497 kilograms] with backup

Size Range

franksinternational.com

5 1/2 inches - 14 inches

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1 - 11/17

page 24

18-inch High Torque Tong with 18 5/8-inch Hydraulic Back-up Key Benefits and Features • Triple sliding-jaw gripping system minimizes stress applied to the tubular • Ideal for achieving high torque on thin-wall tubular applications • Capable of achieving 175,000 foot-pounds of torque • Equipped with Frank's proprietary safety door interlock system • Remote operation enhances safety by removing personnel from well-center • Compatible with Frank's DATA TREK® Advantage Data Acquisition System for torque turn monitoring • Unique tong suspension system compensates for thread loss during make-up or break-out • Compatible with Frank's wide track carriage system • Automated anti-reverse device (AARD) and auto-align systems allow completely hands-free operations

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Model Remote Tong Carriage (with 18-inch Tong and 18 5/8-inch HBU)

Dimensions (L x W x H) 110 inches x 90 5/8 inches x 115 inches

franksinternational.com

Shipping Weight 20,000 pounds [9,072 kilograms]

Torque High Gear/Low Gear (2,800 psi) High Gear: 26,000 foot-pounds Low Gear: 175,000 foot-pounds* (*145,000 foot-pounds clockwise; 175,000 foot-pounds counter-clockwise)

Max Speed (75 GPM)

Casing Range

High Gear: 17.75 rpm Low Gear: 2.6 rpm

9 5/8 inches 18 inches

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1.2 - 05/18

page 25

21-inch Casing Tong Key Benefits and Features • Hydraulic shift • Optional integral back-up • Equipped with Frank's proprietary safety door interlock system • Capable of torque measurements with Frank's DATA TREK® Advantage torque turn monitoring system and/or hydraulic load cell • Can be used with Frank's Tong Pusher Arm (TPA)

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Specifications High Gear RPM/Torque

64 @ 6,000 foot-pounds

Low Gear RPM/Torque

7.5 @ 79,000 foot-pounds

Handle Length Weight

52 inches 4,900 pounds [2,223 kilograms] tong only 6,300 pounds [2,858 kilograms] with backup

Size Range

franksinternational.com

9 5/8 inches - 21 inches

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1

page 26

Scissor Lift Tong Positioning System Key Benefits and Features • Unique tong positioning system allows safe manipulation of power tongs to and from well center without the use of tugger or cables • Remote control capabilities allow for hands-off operations • Built-in patented slippage sensor safety feature • Can be used as a stand-alone carriage system or driven by an AR-5000 Iron Roughneck • Compatible with Frank's 30-inch and 36-inch tongs with integral zero-side load hydraulic backups

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Specifications Safe Working Load

14,200 pounds [6,441 kilograms] (36-inch tong with integral HBT)

Shipping Dimensions (LxWxH)

95 x 84 x 49 inches [2,413 x 2,134 x 1,245 millimeters]

Shipping Weight

10,250 pounds [4,649 kilograms] with motor drive assembly (to be used as carriage)

Elevation Travel

26 inches [660 millimeters]

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1 - 07/17

page 27

10-Ton Automated Single Joint Elevator Key Benefits and Features

Use in the following applications:

Deepwater and ultra-deepwater

•

Ten (10) short ton safe working load

•

Pneumatic operated for less hands-on contact

•

Insert-free interface enables square-shouldered, collar-style connections without biting on pipe

•

Can be used in conjunction with lift nubbins

Shelf

Land

Similar to other single joint elevators, the 10-ton Automated Single Joint Elevator can pick up singles, doubles, or stands from beneath the main elevator. While the operations of some single joint elevators may be limited due to derrick height restrictions, this tool’s streamlined design features the added benefit of handling stands from a position above the main elevator and between the bails, maximizing workspace up to the derrick crown. This flexibility considerably reduces non-productive time and overall rig run-time. Additionally, the elevator’s load bushing design enables the tool to set on collared connections without any tubular penetration.

Specifications 3 1/2 inch load bushings Body Size - 4 1/2 inches 4 1/2 inch load bushings 3 1/2 inch load bushings

Body Size - 6 inches

4 1/2 inch load bushings 5 1/2 inch load bushings 6 inch load bushings 5 1/2 inch load bushings

Body Size - 7 5/8 inches

6 inch load bushings 7 5/8 inch load bushings

Length

25 1/2 inches

Width

21 1/2 inches

Height

19 5/8 inches

Maximum Weight Dressed Heaviest – 3 1/2 inches

320 pounds

*Additional load bushing sizes can be made available upon request

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 28

Rev. 2 - 9/17

36 Inch and 38 Inch JET STRING™ Elevator Key Benefits and Features • Designed to meet or exceed API STD 8-C requirements, with a maximum safe working load of 125 tons • Reduces rig time and cost • Hydraulically operated

Use in the following applications:

Deepwater and ultra-deepwater

Frank's JET STRING™ Elevator is designed to lift flush OD 36 inch and 38 inch casing from the horizontal to vertical position. This elevator eliminates the need for padeyes to be installed, reducing the risk of dropping objects and enhances operational safety and efficiency. This tool is conveniently split in two sections to allow for ease of installation in the horizontal position.

Specifications Model

Safe Working Load

Weight

Height

Width

Length

36 inch JET STRING™ Elevator

125 tons

4,500 pounds

24 inches

63 inches

70 inches

38 inch JET STRING™ Elevator

125 tons

5,720 pounds

26 inches

69 1/4 inches

73 3/4 inches

franksinternational.com

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 3.1 - 09/18

page 29

Collar Load Support (CLS™) System Key Benefits and Features • Allows for both surface-mount and flush-mount shock table configurations, dependent on rotary size • Accommodates multiple control lines or large umbilicals typically encountered on high-tech completions • Eliminates the potential for corrosion cracking as a result of stress concentrations induced by conventional handling equipment as the CLS™ system imparts no penetration impressions to the tubular • Allows the running of threaded and coupled tubulars without inflicting damaging die penetration marks caused by typical slip-type elevators or spiders • Minimizes the risk of slip crush or iron transfer as the tubular is supported by the load face, and not penetration, to avoid the slippage issues prevalent on certain alloys with conventional inserts • Reduces the potential for shock loading of the coupling during load transfer by the elastic compliance of the built-in shock table • The shock table provides gentle deceleration of the joint and string during load transfer operations between the load transfer sleeve and landing spear 250 ton surface-mount shock table for 27 1/2 inch rotary

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

350 ton flush-mount shock table for 37 1/2 inch rotary

Land

Specifications Size

Safe Working Load Rating

3 1/2 inches - 4 1/2 inches

150 tons*

5 inches - 7 inches

250 tons (27 1/2 inch and smaller rotary surface-mount)

When coupled with Frank’s International’s FLUID GRIP® system, this patented procedure provides the only non-marking/zero-mechanicaldamage system in the industry for make-up and handling of completion tubulars. For completions that include control and injection lines running downhole, Frank’s International’s COBRA™ Control Line Manipulator Arm can be coupled to the CLS™ system.

350 tons (37 1/2 inch rotary flush-mount)

*Due to reducer bushings required of these smaller sizes

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 30 Rev. 3 - 4/17

Collar Load Support (CLS™) System for Stands Key Benefits and Features • Allows the running of stands as well as singles • Accommodates multiple control lines or large umbilicals typically encountered on high-tech completions • Eliminates the potential for corrosion cracking as a result of stress concentrations induced by conventional handling equipment as the CLS™ System imparts no penetration impressions to the tubular • Allows the running of threaded and coupled tubulars without inflicting damaging die penetration marks caused by typical slip-type elevators or spiders • Minimizes the risk of slip crush or iron transfer as the tubular is supported by the load face, and not penetration, to avoid the slippage issues prevalent on certain alloys with conventional inserts • Reduces the potential for shock loading of the coupling during the load transfer by the elastic compliance of the built-in shock table • The shock table provides gentle deceleration of the joint and string during load transfer operations between the load transfer sleeve and landing spear

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Size

Safe Working Load Rating

3 1/2 inches - 4 1/2 inches

150 tons

5 inches - 7 inches*

350 tons

7 5/8-inch

400 tons

When coupled with Frank’s International’s FLUID GRIP® System, this patented procedure provides the only non-marking/zero-mechanicaldamage system in the industry for make-up and handling of completion tubulars. For completions that include control and injection lines running downhole, Frank’s International’s COBRA™ Control Line Manipulator Arm can be coupled to the CLS™ System.

*5 1/2-inch is currently the only design in production. SWL may increase or decrease for other sizes.

franksinternational.com

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 31 Rev. 1 - 3/18

EXTENDED RANGE™ Split Bushing Spider 1,250 & 1,000 Ton

Key Benefits and Features • The first casing spider available to the industry with a safe-working load rating greater than 1,000 tons • Available in 1,250 and 1,000 ton • Centers pipe automatically without the need for an external centering device • Tapered casing strings can be run with little or no adjustments and without changing slips

Use in the following applications:

Deepwater and ultra-deepwater

The unique design of Frank's EXTENDED RANGE™ Split Bushing Spider allows the tool to grip casing with improved resistance to slip crushing in comparison to standard casing tools. Our Spider/Elevator Interlock System ensures that either the spider or the elevator is properly set on the pipe before the companion tool is allowed to open.

Shelf

Land

Slips open to provide a passage which is 5 inches in diameter over the nominal pipe size for which the tool is dressed. For example, with the spider dressed for 20 inch casing, the passage through the open slips is 25 inches in diameter. Tapered casing strings can be run with little or no adjustments and without changing slips.

The spider's custom design centers pipe automatically without the need for an external centering device. Hydraulic slip actuation ensures the slips are set.

22 inch x 1250 Ton Split Bushing Spider

Specifications Dimensions Model

Weight

Into Rotary

Above Rig Floor

O.D.

Rotary Table

Pipe Range

Rated Capacity

22 inch – 1,250-ton

11,115 pounds

20 7/8 inches

8 7/8 inches

52 1/2 inches

49 1/2 inches

11 3/4 – 22 inches

1,250 tons

14 inch – 1,000-ton

5,788 pounds

22 inches

5 3/4 inches

40 inches

37 1/2 inches

4 1/2 – 14 inches

1,000 tons

30 inch – 1,000-ton

7,800 pounds

23 inches

9 1/8 inches

52 1/2 inches

49 1/2 inches

24 – 30 inches

1,000 tons

(dressed for 17")

(dressed for 14")

(dressed for 30")

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 3 - 02/17

page 32

EXTENDED RANGE™ Single Joint Elevator Key Benefits and Features • No adjustments required to handle flush OD, upset, or coupled connections for a given pipe size • No additional installation/removal time versus standard single joint elevators • Dual hinge design allows elevator to be opened from either side • 10 Short Ton safe working load • Manual operation

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Frank's EXTENDED RANGE™ Single Joint Elevator (XRSJE) is designed to all casing connection types - coupled, flush, and upset - without modifications to the elevator’s internal bore size. The XRSJE line of tools is compatible with casing sizes from 4 1/2 inches to 16 inches and is rated for 10 short tons. Self-adjustability allows the XRSJE to accommodate premium casing connections, saving our customers time and money.

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 33 Rev. 2 - 02/17

EXTENDED RANGE™ Slip Type Elevator

500, 1000, & 1,250-ton

Key Benefits and Features • Unique design allows the elevator to grip casing with improved resistance to slip crushing compared to standard casing tools • EXTENDED RANGE™ feature allows tapered casing strings to be run with little or no adjustments and without changing slips for all sizes • Equipped with Frank’s proprietary Spider/Elevator Interlock System, which ensures both the spider or the elevator is properly set on the pipe before the companion tool is allowed to open • 500-ton elevator can be air or hydraulically operated • 1000-ton elevator can accept 750-ton, 1000-ton, or 1250-ton Varco bails, and Frank's 1500-ton bails

14-inch x 1000-ton Slip Type Elevator with CE Marking Plate

• Both the 1000-ton and 1250-ton slips open to provide a passage that is 5 inches in diameter over the nominal pipe size for which the tool is dressed • Frank's 1250-ton Slip Type Elevator is the first casing elevator available to the industry with a safe working load rating greater than 1000 tons • 1250-ton elevator is compatible with 1000 and 1250-ton Varco, 1380-ton Blohn & Voss Elevator, and Frank's 1500ton bails • For lower string weights, Frank's 1000-ton x 750-ton crossover bails provide a means to use this elevator on rigs equipped with 750-ton rated top drives and/or blocks

22-inch x 1250-ton Slip Type Elevator

Use in the following applications: Model

Deepwater and ultra-deepwater

Shelf

Land

Weight

Height

Width

Pipe Range

Rated Capacity

22-inch – 1250-ton

14,324 pounds [6,497 kilograms]

69 inches [1,753 millimeters]

69 3/8 inches [1,762 millimeters]

11 3/4 inches – 22 inches [298 millimeters - 559 millimeters]

1,250 tons [1,134 tonnes]

14-inch – 1000-ton

10,130 pounds [4,595 kilograms]

63 3/4 inches [1,619 millimeters]

57 inches [ 1,448 millimeters]

4 1/2 inches – 14 inches [114 millimeters - 356 millimeters]

1,000 tons [907 tonnes]

30-inch – 1000-ton

18,500 pounds [8,391 kilograms]

67 3/8 inches [1,711 millimeters]

75 3/4 inches [1,924 millimeters]

24 inches – 30 inches [610 millimeters - 762 millimeters]

1,000 tons [907 tonnes]

14-inch – 500-ton

3,750 pounds [1,701 kilograms]

45 3/8 inches [1,153 millimeters]

45 5/8 inches [1,159 millimeters]

4 1/2 inches – 14 inches [114 millimeters - 356 millimeters]

500 tons [454 tonnes]

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 34

Rev. 2 - 02/18

RS-250™ Rotary Spider Key Benefits and Features • Fits into standard API 27 1/2 inch rotary table, allowing main body of the tool to be completely recessed into the rotary table. • Allows for easy operation of equipment without the need for special scaffolding that is typically required with surface-mount tools.

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

The RS-250™ rotary spider top cover and guides remain approximately 7 1/2 inches above rig floor, 30 inch OD. Its unique design gives it the ability to run control lines along the tool string by incorporating Frank’s safety Interlock system. The spider can be used in rotaries with diameters as small as 27 1/2 inches, as well as in larger rotaries with the use of adapters. These adapter rings are used to install the tool into National, Emsco, and Oilwell tables. The rotary spider is suitable on casing, completion tubing, or drill pipe applications. Corrosion-resistant tubing can be run with Frank’s slips and inserts.

Specifications Weight

2,700 pounds [1,225 kilograms] without slips

Dimensions

27 9/16 inches [700 millimeters] into rotary, 7 1/2 inches [190 millimeters] above floor 30 inch [762 millimeters] OD

Pipe Range

2 3/8 inches to 7 5/8 inches

Rated Capacity

Air Pressure Required

250 tons [227 tonnes]

70 psi [4.8 bar]

franksinternational.com

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/18

page 35

RS-350™ Long Stroke Spider Key Benefits and Features • Fits into any 37 1/2 inch rotary table without adapter rings, including National, Oilwell, Emsco and Gardner-Denver, allowing the main body of the tool to be completely recessed into the rotary table • Cover and guides remain approximately 18 5/8 inches above the floor • Accommodate multiple control lines typically encountered on today’s high-tech completions • Easily handles large OD control umbilicals used on subsea completions • Allows for easy operation of equipment without the need for special scaffolding that is typically required with surface mount tools • Suitable on casing, completion tubing, or drill pipe applications. Corrosion resistant tubing can be run with Frank’s slips and inserts • "Long Stroke" feature allows slips to be raised higher, therefore wider opening than conventional spider bodies

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Weight

5,400 pounds [2,450 kilograms] without slips

Dimensions

37 7/16 [950 millimeters] inches into rotary 18 5/8 inches [473 millimeters] above rig floor 39 13/16 inches [1,011 millimeters] OD

Pipe Range

4 1/2 inches to 13 1/2 inches

Rated Capacity

Air Pressure Required

350 tons [317 tonnes]

70 psi [4.8 bar]

franksinternational.com

With slips in the “SET” position

With slips in the “UP” position For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 3 - 02/17

page 36

1,000 Ton Drilling Spider Key Benefits and Features • Wearable top & bottom guides • Hinge design allows for easy installation • Carrier system designed to quickly change inserts • Utilizes the Interlock System

Use in the following applications:

Deepwater and ultra-deepwater

The 1,000 Ton Drilling Spider is designed to be used during the drilling and tripping of drill pipe. The use of this drilling spider eliminates the need for different spiders for drilling and tripping, which reduces rig-up

Shelf

time. The drilling spider includes replaceable guides on the top and bottom of the tool to protect the inserts from being damaged while in use. It can be operated using Frank’s Dual Hydraulic Control Console.

Specifications Tool Height

53 5/8 inches

Height Above Rotary

7 1/2 inches

Approximate Weight

14,000 pounds

Insert Sizes

6 5/8 inches and 5 7/8 inches

Slips Up Pressure

800 pounds per square inch

Slips Down Pressure

2,200 pounds per square inch 4 hoses connect to tool Fits in a 37.5 inch rotary

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 3 - 02/17

page 37

500-ton Hydraulic Control Line Spider HCLS500

Key Benefits and Features • EXTENDED RANGE™ capabilities allow tool to run tapered tubing strings with only minor adjustments and without changing slips • Equipped with Frank’s unique spider/elevator Interlock system, which ensures the spider/elevator is properly set on the pipe before the companion tool is allowed to open • Up to a 16 3/4-inch pass through diameter that provides the ability to pass large OD control line or umbilical clamps through the tool body • The foot pedal operated rotating control line guard ensures that the control lines are secured into the protective sleeve before the slips are allowed to close • Able to accept up to a 4-inch umbilical • 50,000 pounds slip set force ensures a positive grip on hard chrome pipe and prevents slippage • Top cover rated to 100 tons

Use in the following applications:

Deepwater and ultra-deepwater Deepwater and ultra-deepwater Shelf

Specifications Size Range Capacity

3 1/2 inches to 9 5/8 inches 500 tons [454 tonnes]

Rotary Size

49 1/2 inches [1,156 millimeters]

Max Width

62 inches [1,575 millimeters]

Height

53 1/2 inches [1,359 millimeters]

Height (above floor)

23 5/8 inches [600 millimeters]

Weight

13,800 pounds [6,260 kilograms]

Operation Type

franksinternational.com

Hydraulic

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 03/17

page 38

750-ton Hydraulic Control Line Spider HCLS750 Key Benefits and Features • EXTENDED RANGE™ capabilities allow tool to run tapered tubing strings with minor adjustments and without changing slips • Equipped with Frank’s unique spider/elevator interlock system, which ensures the spider/elevator is properly set on the pipe before the companion tool is allowed to open • Up to a 15-inch pass through diameter that provides the ability to pass large OD control lines or umbilical clamps through the tool body • Options for control line/umbilical protection including Rotating Control Line Guard (RCLG), Cantilever COBRA™, and Control Line Pusher Arm • Able to accept up to 4-inch umbilical with RCLG and 5 1/2-inch umbilical with the Cantilever COBRA™ and Control Line Pusher Arm • Top cover rated to 100 tons

Use in the following applications:

Deepwater and ultra-deepwater Deepwater and ultra-deepwater Shelf

Size Range

4 1/2 to 9 5/8 inches [11 to 24 centimeters]

Capacity

750 tons [680 tonnes]

Rotary Size

37 1/2 inches [95 centimeters]

Max Width

48 inches [122 centimeters]

Height

54 inches [137 centimeters]

Height (above floor)

29 1/4 inches [74 centimeters]

Weight

9,100 pounds [4,128 kilograms]

Operation Type

Hydraulic

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 03/17

page 39

11 7/8-Inch 500/750-Ton Mega Spider Combination Casing and Drill Pipe Spider Key Benefits and Features • Ability to switch from running casing to landing string without swapping any components, to considerably reduce rig time • Equipped with Frank’s proprietary Spider/Elevator Interlock System, which prevents the elevator or spider from opening until the complementary tool is correctly set on pipe • While dressed for 6 5/8-inch drill pipe, the EXTENDED RANGE™ capabilities enable running up to 11 7/8-inch casing or drill pipe strings without slip changes or tool adjustments • Unique split bushing design allows for easy insertion and removal

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Specifications Casing Size Range Drill Pipe Sizes Capacity

6 5/8 inches - 11 7/8 inches 5 1/2 inches, 5 7/8 inches and 6 5/8 inches 750 Ton (Casing), 750 Ton (Drill Pipe)

Rotary Size Operation Type

49 1/2 inches Hydraulic

Width

52 3/8 inches

Length

57 inches

Height

33 inches

Height Above Rotary Weight

franksinternational.com

8 3/4 inches 12,000 pounds

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 06/18

page 40

14-inch Mega Elevator

Combination Casing and Drill Pipe Elevator Key Benefits and Features • Door-type design equipped with bail rotator, to pick-up casing/drill pipe horizontally from cart/ conveyor or vertically from racked-back stand • Ability to switch from running casing to landing string with only minor adjustments and without swapping components • While dressed for 6 5/8 inch drill pipe, the EXTENDED RANGE™ capabilities enable running 7 5/8-inch – 14-inch casing strings without slip changes or tool adjustments • While dressed for 5 1/2 inch drill pipe, the EXTENDED RANGE™ capabilities expand to 6 1/2 inches – 14 inches

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Specifications Casing Size Range

6 1/2 inches to 14 inches

Drill Pipe Sizes

5 1/2 inches, 5 7/8 inches and 6 5/8 inches (45° or 18°)

Capacity Bails Operation Type

750 Tons 750/500 Ton Hydraulic

Width

73 3/4 inches

Length

45 3/8 inches

Height

30 inches

Weight

11,500 pounds

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1

page 41

Landing String Equipment - Elevators

Key Benefits and Features • Both the 1,250 and 1,500 Ton Drill Pipe Elevators were the industry’s first 1,250 and 1,500 ton handling equipment • Equipped with Frank’s elevator/spider interlock system • No latches or doors, eliminating pinch points • Manufactured out of wrought materials (no castings)

Use in the following applications:

Deepwater and ultra-deepwater

Specifications Model

Weight

Length

Width

Height

Pipe Size Range

1,250 Ton Landing String Elevator

6,880 pounds

47 inches

53 inches

33 1/2 inches

4 1/2 inches to 7 5/8 inches

1,500 Ton Landing String Elevator

8,010 pounds

53 inches

47 inches

38 inches

4 1/2 inches to 7 5/8 inches

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 42

Landing String Equipment - Spiders Key Benefits and Features • The SBS 1000 has a 1,000 ton load rating • Both the SBS 1250 and SBS 1500 were the industry’s first 1,250 and 1,500 ton load rating • The SBS 1000 and SBS 1250 will fit into most 37 1/2 inch rotary tables without the use of adapter rings • The SBS 1500 will fit into most 49 1/2 inch rotary tables without the use of adapter rings • Equipped with Frank’s elevator/spider interlock system • Slips boast an increased slip crush capacity over other slips currently on the market • Manufactured out of wrought materials (no castings)

Use in the following applications:

Deepwater and ultra-deepwater

Specifications Model

Weight

Length

Width

Height

Height Above Rotary

Pipe Size Range

1,000 Ton Split Bushing Spider (SBS)

5,468 pounds

38 5/8 inches

39 3/8 pounds

29 1/4 inches

5 7/8 inches

4 1/2 inches to 7 5/8 inches

1,250 Ton Landing String Split Bushing Spider

7,880 pounds

38 5/8 inches

38 3/4 pounds

33 inches

15 3/4 Inches

4 1/2 inches to 7 5/8 inches

1,500 Ton Landing String Split Bushing Spider

13,050 pounds

57 inches

52 3/8 pounds

36 inches

15 7/8 inches

4 1/2 inches to 7 5/8 inches

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 43

Inner String Spider

Key Benefits and Features • Manual and pneumatic operation • 360 degree inserts • Removable gate • Inner string application

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

The 7 5/8 inch 175 Ton Inner String Spider has been engineered to handle strings ranging in size from 2 3/8 inches to 7 5/8 inches. A pneumatic cylinder actuates a link that rotates crankshafts, which, in turn, lift and lower slips. A safety pin can be engaged to disable the movement of the link, halting the slips in either an “up” or “down” position. This Frank’s innovation enables remote operation to eliminate the manual bowl and handslips typically required of inner string applications. The slips can also be actuated manually.

Specifications Height Base Dimension

21 inches 24 inches x 23 1/2 inches

Capacity

175 tons

Weight

1,600 pounds

Gate Opening

7 3/4 inches

Bowl Opening

9 5/8 inches

Tubular Range

2 3/8 inches - 7 5/8 inches

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 44

COBRA™ Control Line Manipulator Arm Key Benefits and Features • Provides ultimate protection of control lines and umbilicals while working with most flush-mount spider systems • Enhanced interlock system prevents the slips from closing on the control lines • Easy to rig up and down

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Frank's COBRA™ combines the benefits of the Rotating Control Line Sleeve Protector System with the Control Line Pusher Arm into one system. The COBRA™ automatically deploys an auxiliary roller under the main roller head, positioning the control lines against the pipe to assist clamp installation. This system can handle multiple control lines at a low entry angle under high tension. The COBRA™ is controlled via remote control; dual latches enhance rig floor safety, preventing the boom from lowering on personnel. Large throat roller sets are available for passing umbilicals as large as 4 1/2 inches. Rollers can be custom configured for project-specific applications.

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1.5 - 02/17

page 45

Cantilever COBRA™ Control Line Manipulator Arm Key Benefits and Features • Cantilever design allows for mounting orientations at or above 90 degrees to the iron roughneck • Combines the benefits of the Rotating Control Line Guard and those of the Control Line Pusher Arm into one system • Unique COBRA™ and spider interlock system prevents the slips from closing on the control lines • Dual latches enhance rig floor safety by preventing the boom from lowering while personnel are present • The Frank's fleet angle control kit allows for increased side loading from high fleet angles and reduced side loading on grooved rollers • When deployed, the Cantilever COBRA™ roller reaches approximately 82 inches above the top cover of the spider • Able to accept up to a 5 1/2-inch umbilical • Currently outfitted for Frank's 750-ton Hydraulic Control Line Spider (HCLS750) Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Length

104 inches [265 centimeters]

Width

32 inches [82 centimeters]

Height with Boom Lowered

74 inches [180 centimeters]

Height with Boom Deployed

138 inches [350 centimeters]

HCLS Height from floor

27 inches [69 centimeters]

Weight (without transportation skid)

2,250 pounds [1,020 kilograms]

Weight (with transportation skid)

2,500 pounds [1,130 kilograms]

Operation Type

Hydraulic

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 03/17

page 46

Clamp Type Elevator (CTE™) Key Benefits and Features • SWL Ratings from 5 ton to 10 ton, depending on body size. Designed and manufactured in accordance with API Std. 8-C • Can be used for hoisting flush OD, tapered upset or collared-type threaded connections to eliminate having to use a high quantity of lift nubbins racked back in the derrick • Can be used for lifting single joints from the horizontal, building stands, or running stands at the main rotary • Tubular sections can be engaged from the horizontal or vertical position, enabling hoisting from both the v-door and stand build areas • Tubular can also be removed from the elevator near the rig floor by passing the tubular through the hinged door located at the front of the tool which can be removed as necessary • Can also be removed over top of the tubular remotely with enough clearance to pass over most industry standard integral joint connections • Reduction attribute of the Clamp Type Elevator product line allows each elevator frame size to handle a range of tubular sizes by switching slips, inserts, and guides in a matter of minutes • Slip system utilizes self-energizing tapered inserts • System incorporates Frank’s patented overload safety fuse device Use in the following applications:

Deepwater and ultra-deepwater

To continue to provide dependable, technically superior products and services, Frank’s has designed and produced the Clamp Type Elevator (CTE™). The CTE™ is a remotely controlled pneumatic actuated elevator which clamps onto the O.D. of tubular to hoist single joints from the horizontal to vertical position, build stands, or transport stands around the rig floor.

Specifications Pipe Range

Rating (Safe Working Load)

Weight

Width

Length

Height

CTE - 5.000-5

2 7/8 inches - 5 inches

5 tons

278 pounds

23 inches

22 1/2 inches

18 inches

CTE - 7.000-5

5 inches - 7 inches

5 tons

282 pounds

24 inches

22 1/2 inches

18 inches

CTE - 9.625-5

7 inches - 9 5/8 inches

5 tons

298 pounds

25 7/8 inches

24 inches

18 inches

CTE - 11.875-7.5

9 5/8 inches - 11 7/8 inches

7.5 tons

343 pounds

29 1/2 inches

25 7/8 inches

18 inches

CTE - 13.625-7.5

11 7/8 inches - 13 5/8 inches

7.5 tons

390 pounds

32 7/8 inches

28 inches

18 inches

CTE - 14.000-7.5

11 7/8 inches - 14 inches

7.5 tons

395 pounds

32 7/8 inches

28 inches

18 inches

CTE - 18.625-10

16 inches - 18 5/8 inches

10 tons

800 pounds

40 inches

35 inches

20 inches

Model

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 47

INLINE SAFETY FUSE™ For use with auxiliary elevators

Standard Model

Pneumatic Model

Features Use in the following applications:

Deepwater and ultra-deepwater

As part of our commitment to provide a safe work environment, Frank's International has developed the INLINE SAFETY FUSE™. The purpose of the safety fuse is to prevent failure of auxiliary elevator and rigging, and maintain control of the single joints or stands during an overpull situation by providing personnel with an indication of overload so that they have the opportunity to halt hoisting operations. For years, the typical rig-up of an auxiliary elevator has included an inline swivel that allows the joint to spin freely during make-up or break-out. During breakout operations, it is possible for the pin and box threads to hang up as the driller is hoisting the joint upwards, often resulting in an overload of the elevator and associated rigging. This is especially a problem with negative load flank threads, commonly found on premium connections. Often times this overloading will result in a failure of the inline swivel or rigging, causing the driller to lose control of the joint.

Shelf

Land

Frank’s safety fuse functions as a conventional swivel that serves as a known “weak link” in the auxiliary elevator rigging assembly that shears at a predetermined load. Once an overload has occurred, the shear pin “weak link” will fail, allowing the telescoping rod of the safety fuse to extend without a complete separation of the auxiliary elevator rigging. This brief instant provided by the safety fuse extension allows hoisting operations to be stopped in order to maintain control of the joint or stand, and personnel to clear the rig floor. After the shear has occurred, the telescoping rod has a contrasting color that serves as a clear indicator that the system has been overloaded. After an overload occurs, the fuse assembly, auxiliary elevator and associated rigging are visually inspected and a new shear pin is installed before the pipe running operations are continued.

Specifications Model

Safe Working Load Rating

Standard

5 tons [4.54 tonnes] 10 tons [9.07 tonnes] 15 tons [13.60 tonnes] 25 tons [22.67 tonnes]

Pneumatic

5 tons [4.54 tonnes] 7 1/2 tons [6.80 tonnes] 10 tons [9.07 tonnes]

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 3 - 02/17

page 48

Backpacker™ Compensator System

Key Benefits and Features

Use in the following applications:

•

Supports the weight of the joint or stand such that little weight is on the threads of connection during rotation for make-up or back out of a threaded connection

•

Stainless steel remote control cabinet with air/ hydraulic control system controlled from rig floor

•

Can be used for single joints or stands of pipe

•

Works during make-up or back-out

Deepwater and ultra-deepwater

The Backpacker™ compensator system is designed to aid in the running and pulling of premium threaded tubulars. Use of this system allows the driller to position the add-on joint or stand, just above the box connection. From that point the Backpacker™ controls all joint/stand movement. The Backpacker™ is referred to as the “intelligent compensator” due to its unique feature whereby each joint or stand is individually

Shelf

Land

weighed by the Backpacker™ system. Using the unique joint or stand weight, the Backpacker™ allows the joint or stand to be compensated such that only a minimum axial load is applied to the pin/box threads being made up. With this level of compensation control, premium connections can run with confidence that the pin nose will not be damaged during stab-in and galling will be greatly reduced or eliminated.

Specifications Cylinder Length Retracted

55.1 inches [1,400 millimeters]

Cylinder Length Fully Extended

88.6 inches [2,250 millimeters]

Unit Air Supply

Control Unit

Available Sizes

120 pounds per square inch [8 bar]

110 pounds [50 kilograms]

1.5 tons, 5.0 tons, and 8.5 tons

Dimensions provided are approximate and do not include associate rigging

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 49

HORSESHOE® Single Joint Elevator Key Benefits and Features • Assists in a safer and more efficient handling process for single joints of pipe through less hands-on contact • Automated pipe catches are opened using remotely-operated air cylinders mounted inside the horseshoe body • Released to the closed and locked position in a similar fashion by spring force, providing a positive mechanical hold once the air is exhausted from the cylinders • Mechanical latch plate helps to secure and prevent premature opening of the pipe catches • Internal sensors indicate open or closed latch status at the control console Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

The HORSESHOE® Single Joint Elevator is a pneumatic horseshoe-type elevator that aids in raising joints from the v-door. Its unique design allows the pipe to enter its bore by passing through the open end, or throat, until it contacts the trough, where it is mechanically held in place concentric to the elevator bore and perpendicular to the pipe centerline axis. A reversed procedure may also be used when laying down pipe from its vertical position, wherein the pipe catches are actuated in order to allow the elevator to be easily removed from the pipe.

Specifications Size Range Safe Working Load

Designed for use with Frank’s manufactured CRT Tools

franksinternational.com

4 1/2 inches [114 millimeters] 22 inches [558 millimeters] 6 short tons [53.3 kilonewtons] FX-350 FX-500 / FX-600 FA-1® 14" FA-1® 22"

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 50

HORSESHOE® Casing Elevator Key Benefits and Features • Eliminates the need for personnel to be lifted in riding belts by latching directly onto the pipe in the v-door • Allows for safe and rapid handling of large-O.D. pipe • No padeyes or slings required • No need to manipulate heavy doors, like those found on typical side door elevators • Allows for lifting from the horizontal to vertical position and running of the casing string • Provides optimal large-O.D. pipe handling by utilizing air-operated bowls and slips Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Rating

350

350

350

350

350

350

350

350

250

350

350

500

500

500

Size

16 inches

18 5/8 inches

20 inches

22 inches

24 inches

26 inches

28 inches

30 inches

36 inches

38 inches

42 inches

40 inches

46 inches

48 inches

Weight

1,600 pounds

1,700 pounds

1,700 pounds

1,800 pounds

1,900 pounds

1,900 pounds

1,900 pounds

2,100 pounds

2,300 pounds

2,400 pounds

4,700 pounds

4,700 pounds

5,500 pounds

5,500 pounds

For use with square lift shoulder connections or lift nubbings only

franksinternational.com

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 3 - 01/18

page 51

500-ton Completions Elevator Key Benefits and Features • Compact design for use on smaller rigs • Bail stabilizers prevent the elevator from rotating within the bails • Hydraulically-powered 25-ton gripping force to prevent slippage on premium tubing • EXTENDED RANGE™ capabilities allow tool to run tapered tubing strings with minor adjustments and without changing slips • Equipped with Frank's proprietary spider/elevator interlock system, which ensures the spider/elevator is properly set on the pipe before the companion tool is allowed to open • 500-ton safe working load tested in accordance with API 8C standards • Compatible with 500 or 750 ton bails • Adjustable bottom guide assembly eliminates the need to change guides • Available with Frank's conventional, continuous tooth, or fine point inserts Use in the following applications:

Deepwater and ultra-deepwater

Deepwater Shelf and ultra-deepwater

Land

Specifications Model

Pipe Range

Rated Capacity

Weight

Width

Length

Height

7 5/8-inch

4 1/2 inches - 7 5/8 inches

500 tons [454 tonnes]

5,488 pounds [2,489 kilograms]

45 3/4 inches

33 1/2 inches

66 1/4 inches

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1 - 06/17

page 52

STCLE Slip Type Center Latch Elevator Key Benefits and Features • Designed to lift single or double joints of flush OD casing from the horizontal to vertical position • Eliminates the need for padeyes to be installed, reducing the risk of dropping objects, and enhances operational safety and efficiency • Reduces rig time and cost • Hinge design allows for ease of installation in the horizontal position • Pneumatically operated, so no risk of leaks or spills • Designed and manufactured in accordance with API STD. 8-C • Frank’s patented overload fuse safety device can be incorporated during rig-up • Five sizes: • 16 inch x 10-ton STCLE • 20 inch x 10-ton STCLE • 24 inch x 15-ton STCLE • 28 inch x 17-ton STCLE • 30 inch x 17-ton STCLE Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Capacity

Pipe Size Range

Weight

Height

Maximum Width

Length

Pneumatic Minimum Pressure

Pneumatic 3Maximum Pressure

16 inches [41 centimeters]

10 Tons [9 tonnes]

14 inches - 16 inches [36 centimeters 41 centimeters]

550 pounds [249 kilograms]

18 3/8 inches [47 centimeters]

32 inches [81 centimeters]

32 inches [81 centimeters]

70 psi [5 bar]

250 psi [17 bar]

20 inches [51 centimeters]

10 Tons [9 tonnes]

18 inches - 20 inches [46 centimeters 51 centimeters]

650 pounds [295 kilograms]

18 3/8 inches [47 centimeters]

37 inches [94 centimeters]

34 1/2 inches [88 centimeters]

70 psi [5 bar]

250 psi [17 bar]

24 inches [61 centimeters]

15 Tons [14 tonnes]

22 inches - 24 inches [56 centimeters 61 centimeters]

860 pounds [390 kilograms]

18 3/8 inches [47 centimeters]

43 inches [109 centimeters]

37 1/2 inches [95 centimeters]

70 psi [5 bar]

250 psi [17 bar]

28 inches [71 centimeters]

17 Tons [15 tonnes]

26 inches - 28 inches [66 centimeters 71 centimeters]

900 pounds [408 kilograms]

18 3/8 inches [47 centimeters]

48 inches [122 centimeters]

44 1/2 inches [113 centimeters]

70 psi [5 bar]

250 psi [17 bar]

30 inches [76 centimeters]

17 Tons [15 tonnes]

30 inches [76 centimeters]

935 pounds [424 kilograms]

18 3/8 inches [47 centimeters]

50 inches [127 centimeters]

46 1/2 inches [118 centimeters]

70 psi [5 bar]

250 psi [17 bar]

STCLE Body Size

franksinternational.com

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 12/18

page 53

250-ton Slip Type Elevator Key Benefits and Features • 250-ton safe working load tested in accordance with API 8C standards • Compact design for use on smaller rigs • Convenient removal and installation of the carriers, inserts, and guides make the elevator more efficient when dressing the tools for various pipe sizes • Bail stabilizers restrict the tool from rotating with respect to the bails • Requires air or hydraulic power sources • Equipped with Frank's elevator/spider interlock system that prevents the elevator or spider from opening unless the opposite tool is correctly set to grip the pipe

Use in the following applications:

Shelf

Land

Specifications Weight

1,600 pounds [726 kilograms] without carriers

Dimensions

41 17/64 inches [1,048 millimeters] high 36 21/64 inches [923 millimeters] wide

Pipe Range

2 3/8 inches to 7 5/8 inches

Rated Capacity

Air Pressure Required

250 tons [227 tonnes]

70 psi [5 bar]

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1 - 05/17

page 54

250-ton Split Bushing Spider Key Benefits and Features • 250-ton safe working load tested in accordance with API 7K standards • Compatible with 27 1/2-inch and larger rotaries • Convenient removal and installation of the carriers, inserts, and guides make the spider more efficient when dressing the tools for various pipe sizes • Unique split bushing design allows easy insertion and removal • Requires air or hydraulic power sources • Equipped with Frank's elevator/spider interlock system that prevents the elevator or spider from opening unless the opposite tool is correctly set to grip the pipe

Use in the following applications:

Shelf

Land

Specifications Weight

2,800 pounds [1,270 kilograms] without carriers

Dimensions

14 1/2 inches [368 millimeters] into rotary 26 inches [661 millimeters] OD with cover

Pipe Range

2 3/8 inches to 7 5/8 inches

Rated Capacity

Air Pressure Required

250 tons [227 tonnes]

70 psi [5 bar]

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1 - 05/17

page 55

ICE™ Tool Increased Compatibility Elevator

Key Benefits and Features • Handles various connectors to full load capacity • Maintains efficient operational characteristics of the Frank's International HORSESHOE® Elevator • Improved coverage around connector shoulder • Interchangeable load bushing allow several pipe sizes to be run using a single tool • Mechanically-operated tool eliminates the need for a pneumatic or hydraulic power source • Ability to lift tubulars from the horizontal to the vertical position eliminates the need for a single joint elevator

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Tool Size

Pipe OD

24 inches x 500 tons (Accepts 500- and 750-ton bails)

24 inches 22 inches 20 inches 18 inches (350 tons)

30 inches x 350 tons (Accepts 350-, 500-, and 750-ton bails)

30 inches 28 inches 26 inches

38” inches x 350 tons (Accepts 350-, 500-, and 750-ton bails)

38 inches 36 inches 34 inches 32 inches

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 56 Rev. 2 - 04/17

Door Style Clamp Type Elevator (DSCTE™) Key Benefits and Features • Designed to meet or exceed API STD 8-C requirements, with a maximum safe working load of 10 tons • Utilized for hoisting flush OD, tapered upset, or collared-type threaded connections to eliminate the use of lift nubbins • Clearances allow for most industry standard integral joint connections to pass through the body of the elevator • Utilized for lifting single joints from the horizontal, building stands, or running stands at the main rotary • Compatible with Frank's casing running tools

Use in the following applications:

Deepwater and ultra-deepwater

Deepwater Shelf and ultra-deepwater

Land

Specifications Model

Pipe Range

Rating (Safe Working Load)

14-inch

11 7/8 inches - 14 inches

10 tons

franksinternational.com

Weight

Width

Length

Height

950 pounds

46 5/8 inches

27 7/8 inches

23 1/4 inches

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1 - 06/17

page 57

FA-1® 14" Top Drive Casing Running Tool Key Benefits and Features • Fills, rotates, circulates and reciprocates the casing string simultaneously, thus improving the ease with which casing strings are run to desired target depth, even with troublesome or difficult hole conditions • Patented thread compensator assists with thread / make-up integrity. Reduces potential for thread damage during make-up • Equipped with PRAYING MANTIS® pipe pick-up arms and automated HORSESHOE® single-joint pick-up elevator 3’-9 1/2" [1.2m] [1.2m]

3’-1 9/16” [0.95m]

Use in the following applications:

Shelf

Land 3’-9 1/2" [1.2m] [1.2m]

2’-4 1/4" [0.72m] [0.72m]

3’-1 9/16” [0.95m]

12’-6 9/16” [3.8m]

* Short Arms: Retracted: 9’-8 11/16” [3.0m] Extended: 14’-10 11/16” * [4.5m] UK: Retracted: 16’-1 13/16” [4.9m] Extended: 24’-1 13/16” [7.4m]

Overall Length (arms retracted) * Short Arms: 13’-1 5/8” [4.0m] * UK: 19’-6 3/4" [6.0m]

2’-4 1/4" [0.72m] [0.72m]

o

45

o

90 (Max Luff) 12’-6 9/16” [3.8m]

Automated Air-Operated TM Horseshoe Single-Joint Pickup Elevator

* Short Arms: Retracted: 9’-8 11/16” [3.0m] Extended: 14’-10 11/16” * [4.5m] UK: Retracted: 16’-1 13/16” [4.9m] Extended: 24’-1 13/16” [7.4m]

Overall Length (arms Short Arms: retracted) Retracted: 6’-10 5/8” [2.1m] * Short Arms: 13’-1 5/8” [4.0m] Extended: 10’-6 5/8” [3.2m] * UK: UK: 19’-6 3/4" Retracted: 11’-5 1/4" [3.5m] [6.0m] Extended: 17’-1 13/16” [5.2m]

*Dimensions are the same for the 9 5/8 in - 14 in, 18 5/8 in * Dimensions are the same for the 9 5/8”-14”, 18 5/8”, & 20” Horseshoe Assemblies

franksinternational.com

For more information call 1-800-833-7265

Automated Air-Operated TM ©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International Horseshoe Single-Joint products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information Pickup Elevator and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

* Dimensions are the same for the 9 5/8”-14”, 18 Rev. 5 - 02/17

5/8”, & 20” Horseshoe Assemblies

page 58

Page 1

Re Ext

Re Exte

FA-1® 14" Top Drive Casing Running Tool Casing Size Range

9 5/8 inches - 14 inches, 18 5/8 inches, 20 inches [244 millimeters - 356 millimeters, 473 millimeters, 508 millimeters]

Hoisting Capacity (API 8C)

500 tons [454 tonnes]

(May be limited by top drive crossover sub.)

Push Down Force Capacity

86,000 pounds [39,000 kilograms]

Torque Capacity

65,000 ft-lbs [88,128 N-m]

RPM, Continuous

85

RPM, Maximum

100

Thread Compensation

9 inches [229 millimeters]

Overall Length (Short Arms- Retracted)

13 feet - 1 5/8 inches [4.0 meters]

Overall Length (UK, Pick-Up Arms - Retracted)

19 feet - 6 3/4 inches [6.0 meters]

Weight

8,800 pounds [3,992 kilograms]

Through Bore

2 inches [51 millimeters]

Pressure Rating

5,000 psi [345 bar]

(May be limited by the packer cup) Praying Mantis® Pick-up Arm Capacity

5 tons [4.54 tonnes]

Praying Mantis® Pick-up Arm Length

See diagram - page 1

Top Connection

6 5/8 inches REG

Circulation Rate Max (BBL/min) (with valve removed)

20 Incorporates Fill-Up and Circulation Functions

Use in the following applications:

Shelf

Land

Key Benefits and Features •  Designed to meet or exceed API 8C requirements • Control panel operates patented FA-1®, PRAYING MANTIS® pipe pickup arms, HORSESHOE® single-joint pick-up elevator and spider • Patented interlock functionality ensures that either the spider or FA-1® slips are directed to the set position at all times, reducing the risk of dropped pipe

franksinternational.com

• Display for advanced functionality; displays slip position, pipe end position and fault detection

• Separate displays for both operator and driller



• Electronic packages meet Atex Zone 1 and 2, or UL div 2

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 5 -02/17

page 59

Page 2

FA-1® 22" Top Drive Casing Running Tool Key Benefits • Fills, rotates, circulates, and reciprocates the casing string simultaneously, thus improving the ease with which casing strings are run to desired target depth, even with troublesome or difficult hole conditions • Can be used for 16-in. to 30-in. casing while drilling (CwD) operations • Patented thread compensator assists with thread and make-up integrity, which reduces potential for thread damage during make-up • Interlock functionality ensures that either the spider or FA-1® slips are directed to the set position at all times, reducing the risk of dropped pipe

Use in the following applications:

Shelf

Land



4'-6 1/2" [1.4m]

   

 

4'-6 1/2" [1.4m]

 

   

   













   



  



  

     

    

franksinternational.com

For more information call 1-800-833-7265

  ©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

    

Rev. 2 -02/17

    

page 60 Page 1

FA-1® 22" Top Drive Casing Running Tool Casing Size Range

16 inches - 30 inches [406 millimeters - 762 millimeters]

Hoisting Capacity (API 8C)

500 tons [454 tonnes]

(May be limited by top drive crossover sub or circulation pressure.)

Push Down Force Capacity

86,000 pounds [39,000 kilograms]

Torque Capacity

70,000 ft-lbs [94,907 N-m]

RPM, Continuous

85

RPM, Maximum

100

Thread Compensation

9 inches [229 millimeters]

Overall Length (Pick-Up Arm - Retracted)

See diagram - page 1

Weight

10,000 pounds [4,536 kilograms]

Through Bore

2 inches [51 millimeters]

Pressure Rating

5,000 psi [345 bar]

(May be limited by the packer cup) PRAYING MANTIS® Pick-up Arm (Hoist Capacity)

10 tons [9.07 tonnes] for 16 inches - 26 inches



12.5 tons [11.34 tonnes] for 26 inches - 30 inches

PRAYING MANTIS® Pick-up Arm Length

See diagram - page 1

Top Connection

6 5/8 inches REG

Circulation Rate Max

10 (BBL/minute with valve)

Incorporates fill-up and circulation functions. Max flow rates may be limited by pressure. For additional flow requirements, please contact Frank's International Engineering department.

Use in the following applications:

Shelf

Land

Key Benefits and Features •  Designed to meet or exceed API 8C requirements • Control panel operates Frank's International patented FA-1® casing running tool, PRAYING MANTIS® pipe pick-up arms, HORSESHOE® single-joint pick-up elevator and spider

franksinternational.com

• Equipped with PRAYING MANTIS® pipe pick-up arms and automated HORSESHOE® single-joint pick-up elevator

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 61

Page 2

FX-350™ Top Drive Casing Running Tool Key Benefits and Features • Fills, rotates, circulates and reciprocates the casing string simultaneously, thus improving the ease with which casing strings are run to desired target depth, even with troublesome or difficult hole conditions • Patented thread compensator assists with thread / make-up integrity. Reduces potential for thread damage during make-up • Equipped with control-operated PRAYING MANTIS® pipe pick-up arms and automated HORSESHOE® Single Joint Elevator

3’-9” [1.1m]

4’-11 5/16” [1.5m]

Use in the following applications:

Shelf

Land 2’-3 3/4" [0.70m]

3’-9” [1.1m]

4’-11 5/16” [1.5m] 9’-11 7/8” [3.0m]

Praying Mantis Arm Length: Retracted: * 9’-5 1/8” [2.9m] Extended: *13’-5 1/8” [4.1m]

Overall Length [pickup arm retracted]: * 11’-3 3/4" [3.4m]

3’-9

4’-11 5/16” [1.5m]

45

2’

o

o

88 (Max Luff) 2’-3 3/4" [0.70m] 9’-11 7/8” [3.0m] Retracted: 6’-8” [2.0m] Extended: 9’-5 15/16” [2.9m] [2.9m]

Praying Mantis Arm Length: Retracted: * 9’-5 1/8” [2.9m] Extended: *13’-5 1/8” [4.1m]

Overall Length [pickup arm retracted]: * 11’-3 3/4" [3.4m]

Automated AirOperated TM

Horseshoe Single Joint Elevator

*Dimensions are the same for the 4 1/2”-9 5/8” HORSESHOE®

franksinternational.com

9’-11 7/8” [3.0m] Overall Length [pickassemblies up arm retracted]: * 11’-3 3/4" [3.4m]

Praying Mantis Arm Length: Retracted: * 9’-5 1/8” [2.9m] Extended: *13’-5 1/8” [4.1m]

45

o

For more information call 1-800-833-7265

o

88 Automated Air(Max Luff) Operated ©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International TM products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information Horseshoe Single Joint and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative. Elevator Retracted: 6’-8” [2.0m] Extended: 9’-5 15/16” [2.9m [2.9m]

page 62

Page 1

Rev. 6 - 02/17 Automated Air-

FX-350™ Top Drive Casing Running Tool Casing Size Range

4 1/2 inches - 9 5/8 inches [114 millimeters - 244 millimeters]

Hoisting Capacity (API 8C)

350 tons [318 tonnes]

(May be limited by top drive crossover sub.)

Push Down Force Capacity

77,600 pounds [35,199 kilograms]

Torque Capacity

35,000 ft-lbs [47,454 Nm]

RPM, Continuous

85

RPM, Maximum

100

Thread Compensation

4 inches [102 millimeters]

Overall Length (Pick-Up Arm - Retracted)

11 feet - 3 3/4 inches [3.4 meters]

Weight

6,950 pounds [3,152 kilograms]

Through Bore

2 inches [51 millimeters]

Pressure Rating

5,000 psi [345 bar]

(May be limited by the packer cup)

(7,500 psi [518 bar] version available)

PRAYING MANTIS® Pick-up Arms (Hoist Capacity)

5 tons [4.54 tonnes]

PRAYING MANTIS® Pick-up Arm Length

See diagram - page 1

Maximum Rotating Diameter

27 3/4 inches [705 millimeters]

Circulation Rate Max

20 (BBL/minute with value removed)

Top Connection

4 1/2 IF Incorporates Fill-Up and Circulation Functions

Use in the following applications:

Shelf

Land

Key Benefits and Features •  Designed to meet or exceed API 8C requirements • Control panel operates patented FX-350™ casing running tool, PRAYING MANTIS® pipe pick-up arms, HORSESHOE® single joint elevator and spider • Patented Interlock functionality ensures that either the spider or FX-350™ slips are directed to the set position at all times, reducing the risk of dropped pipe

franksinternational.com

• Patented mixed string running capability: (e.g. 4 1/2 inches x 5 1/2 inches without redressing slips) • Graphic display, for advanced functionality, indicates slip position, pipe end position and fault detection

• Separate displays for both operator and driller



• Zone 1 approved nodes and Class 1, Div. 2, for use on the rig floor • Electronic packages meet Atex Zone 1 and 2, or UL div 2

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 63 Rev. 6 - 02/17

Page 2

FX-500 and FX-600 Top Drive Casing Running Tools Key Benefits and Features • Fills, rotates, circulates and reciprocates the casing string simultaneously, thus improving the ease with which casing strings are run to desired target depth, even with troublesome or difficult hole conditions • Patented thread compensator assists with thread / make-up integrity. Reduces potential for thread damage during make-up • Equipped with PRAYING MANTIS® Pipe Pick-Up Arms & automated HORSESHOE® Single-joint Pickup elevator

4’-6 3/8” [1.4m]

3’-7 1/2” [1.1m]

Use in the following applications:

Shelf

Land 2’-10” [0.86m]

4’-6 3/8” [1.4m]

3’-7 1/2” [1.1m]

2’-10” [0.86m] Overall Length (arms retracted) Short Arms: * 14’-5” [4.4m] Mid Arms: * 15’-7” [4.7m] Long Arms: * 20’-8 1/4” [6.3m]

Short Arms:

13’-1 15/16” [4.0m]

* Retracted: 11’-6 1/2" [3.5m] * Extended: 16’-6 1/2" [5.0m] Mid Arms:

* Retracted: 12’-8 1/2" [3.9m] * Extended: 17’-8 1/2" [5.4m] Long Arms:

* Retracted: 19’-4 1/2" [5.9m] * Extended: 24’-4 1/2" [7.4m]

Automated Air-Operated TM

Horseshoe Single-Joint Pickup Elevator

o

45

o

84 (Max Luff) Overall Length (arms retracted) Short Arms: * 14’-5” [4.4m] Short Arms: Mid Arms: Retracted: 8’-1 15/16” [4.7m] * 15’-7”[2.5m] Extended: 11’-8 3/8” [3.6m] Long Arms: Mid * Arms: 20’-8 1/4” [6.3m] Retracted: 8’-11 13/16” [2.7m] Extended: 12’-6 1/4" [3.8m] Long Arms: Retracted: 13’-8 3/8” [4.2m] Extended: 17’-2 3/4" [5.3m]

Short Arms:

13’-1 15/16” [4.0m]

* Retracted: 11’-6 1/2" [3.5m] * Extended: 16’-6 1/2" [5.0m] Mid Arms:

* Retracted: 12’-8 1/2" [3.9m] * Extended: 17’-8 1/2" [5.4m] Long Arms:

* Retracted: 19’-4 1/2" [5.9m] * Extended: 24’-4 1/2" [7.4m]

*Dimensions are the same for the 7” - 14” HORSESHOE® Assemblies

franksinternational.com

Automated Air-Operated

For more information call 1-800-833-7265 Horseshoe Single-Joint TM

Pickup Elevator ©2018 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 64

Rev. 4 - 02/18

FX-500 and FX-600 Top Drive Casing Running Tools Casing Size Range

7 inches - 14 inches [178 - 356 millimeters]

Hoisting Capacity (API 8C) (May be limited by top drive crossover sub.)

FX-500: 500 tons [454 tonne] FX-600: 600 tons [544 tonne]

Push Down Force Capacity

56,500 pounds [25,628 kilograms]

Torque Capacity

65,000 foot-pounds [88,128 Newton-meters]

RPM, Continuous

85

RPM, Maximum

100

Thread Compensation

9 inches [229 millimeters]

Overall Length (Long Arms - Retracted)

20 feet - 8 1/4 inches [6.3 meters]

Overall Length (Mid Arms - Retracted)

15 feet - 7 inches [4.7 meters]

Overall Length (Short Arms - Retracted)

14 feet - 5 inches [4.4 meters]

Weight

13,750 pounds (est.) [6,236 kilograms]

Through Bore

2 inches [51 millimeters]

Pressure Rating

5,000 pounds per square inch [345 bar]

(May be limited by the packer cup) PRAYING MANTIS® Pick-up Arms (Hoist Capacity)

5 tons [4.54 tonne]

PRAYING MANTIS® Pick-up Arm Length

See diagram - page 1

Maximum Rotating Diameter

34 3/4 inches [883 millimeters]

Top Connection

6 5/8 inches REG

Extended Range Capability

1 1/8 inches [29 millimeters]

Circulation Rate Max (BBL/minute) (with valve removed)

20 Incorporates Fill-Up and Circulation Functions

Use in the following applications:

Shelf

Land

Key Benefits and Features • Designed to meet or exceed API 8C requirements • Control panel operates patented FX-500/600, PRAYING MANTIS® Pipe Pick-Up Arms, HORSESHOE® Single-joint Pick-up elevator and spider

• Graphic layout for advanced functionality, displays slip position, pipe end position, HORSESHOE® Single-joint set/unset, and fault detection

• Patented Interlock functionality ensures that either the spider or FX500/600 slips are directed to the set position at all times, reducing the risk of dropped pipe



franksinternational.com

• Separate displays for both operator and driller • Electronic packages meet Atex Zone 1 and 2, or UL div 2

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 65

Rev. 4 - 02/18

Torque Activated Wedge Grip (TAWG® Tool) Top Drive Casing Running Tool Key Benefits and Features • • • • • • • •

Enhances rig floor safety and efficiency by eliminating the need for a power tong, hydraulic power unit, and umbilical hoses Requires a minimal amount of personnel to run the casing string when combined with Frank's rotary spiders Combines the functions of a power tong, fill-up tool, and elevator into one complete package Fill-up provisions are integral to the tool Provides ability to rotate, circulate, and reciprocate pipe through tight spots in the well bore and improve the cementation process Has a high capacity for set down load capacity Fast, safe and easy rig-up and removal In standard configuration, the tool is capable of Casing-while-Drilling (CwD) operations

Use in the following applications:

Deepwater and ultra-deepwater

franksinternational.com

Shelf

Land

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 05/17

page 66

Specifications TAWG® Tool Specifications Tool Size

4 1/2 Inch

5 1/2 Inch

7 Inch - 9 5/8 Inch

9 5/8 Inch - 13 3/8 Inch

125

200

250

500

Max Torque Rating @ 0 Hoist (ft-lbs)

12,500

22,000

27,000

45,000

Max Torque Rating @ Full Hoist (ft-lbs)

5,000

9,000

18,000

27,500

70

100

110

110

Ratings

Max Hoist Rating (Tons)

Set-Down Load Capacity (Tons) Continuous Operating Speed Operational Specificaons

Length Minimum

69 1/2 inches

74 1/2 inches

91 inches

90 1/2 inches

Length Maximum

72 3/4 inches

77 3/4 inches

94 1/4 inches

94 inches

Max OD of Tool

14 1/4 inches

14 1/4 inches

14 1/4 inches

14 3/8 inches

Weight of Tool

625 pounds

650 pounds

800 pounds

1,200 pounds

Available Thread Compensation

3 1/4 inches

3 1/4 inches

3 1/4 inches

3 1/2 inches

Fill-up and Circulation Specs

Unlimited

Circulation Rate Max (BBL/min) (with valve removed)

4 1/2 inches - 5 1/2 inches

7 inches - 13 3/8 inches

10

15

Temperature (ºF)

200

Pressure Rating (psi) (May be limited by the packer cup)

5,000

4 1/2 Inch - 9 5/8 Inch Specifications Nominal OD

9 5/8 Inch - 13 3/8 Inch Specifications

Weight Per Foot (lbf/ft)

Hoist Rating

Hoist Rating @1,000 psi Circ. Press.

11.60

125

119

13.50

125

119

17.00

200

191

20.00

200

192

Nominal OD

4.500

5.500

Weight Per Foot (lbf/ft)

Hoist Rating

Hoist Rating @1,000 psi Circ. Press.

32.30

500

243

36.00

500

244

40.00

500

244

43.50

500

245

47.00

500

245

9.625

7.000

7.625

23.00

200

192

23.00

250

235

26.00

250

236

29.00

250

236

53.50

500

246

29.70

250

233

61.00

500

213

24.00

250

225 68.00

500

214

32.00

250

227

36.00

250

220

72.00

500

215

13.375

8.625

9.625

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 05/17

page 67

External Torque Activated Wedge Grip (FX-TAWG™ Tool) Top Drive Mechanical Casing Running Tool Key Benefits and Features • • • • • • • •

Enhances rig floor safety and efficiency by eliminating the need for a power tong, hydraulic power unit, and umbilical hoses Requires minimal personnel to run the casing string when combined with Frank's rotary spiders Combines the functions of a power tong, fill-up tool, and elevator into a single, complete package Fill-up provisions are integral to the tool Provides ability to rotate, circulate, and reciprocate pipe through tight spots in the well bore and improve the cementation process Has a high capacity for set down load capacity Fast, safe, and easy rig-up and removal Capable of casing-while-drilling (CwD) operations when in standard configuration

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Hoist Capacity

500 tons [454 tonnes] 40,000 foot-pounds [54,233 Newton-meters]

Max Torque Max Circulation Pressure* Sizes

10,000 psi [690 bar] 4 1/2-inch, 5-inch, 5 1/2-inch, 6-inch, 7-inch, 7 5/8-inch

Weight**

2,800 pounds [1,270 kilograms]

Max OD

16.5 inches [419 millimeters]

Max Length

97 inches [2,464 millimeters]

Float Length

5.8 inches [147 millimeters]

Top Drive Connection

NC50

* May be limited by the packer cup ** Weight shown for the heaviest dressing (4 1/2-inches)

franksinternational.com

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1 - 05/18

page 68

DATA TREK® Advantage Computer System Key Benefits and Features • System incorporates Frank’s-designed critical hardware components • An accurate and proven method of measuring turns • Very precise shoulder detection allows for delta torque and delta turn make-up of threaded connections • The most precise torque control/torque hold capabilities of any system on the market that provides further capabilities to control make-up of premium threaded connections • System is periodically upgraded to take advantage of the latest technology • Frank’s Integrated Control System (ICS™) is an optional feature of the DATA TREK® Advantage computer system

Use in the following applications:

Deepwater and ultra-deepwater

Certification The DATA TREK® is available with ATEX Zone 1 hazardous area certification, or NEC500 Class 1 Division 2 hazardous area certification. Calibration Load cells and calibration procedures are in compliance with ASTM E-4. Load Cells A wide range of special application load cells for unique customer requirements are available. The DATA TREK® Advantage system can handle any torque capacity. Magnification Original make-up data is redrawn at much higher resolutions to allow pinpoint detection of parameters, including shoulder torque, turns after shoulder and the amount of torque actually applied to the shoulder.

Shelf

Land

Statistical Analysis Statistical information for each make-up is permanently stored for immediate or post-job recall. Each make-up is automatically compiled for use in statistical comparisons. Data is available in both graphical and digital format. Pipe Tally The DATA TREK® Advantage system provides additional customer support by tracking the amount of pipe run on a per joint basis. Total footage run is displayed as pipe is added to or removed from the well. Tong Speed Monitor Tong RPM is monitored in real time and recorded for each make-up. RPM data is displayed in an RPM vs Turns graph that easily correlates to the make-up graph.

Data Recall The DATA TREK® Advantage system allows instant recall of all collected data, on the rig or after the job.

franksinternational.com

For more information call 1-800-833-7265

©2017Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 69

Wireless Torque Sub Key Benefits • Redundant strain circuits for reliable torque measurement • Portable ATEX Zone 1 receiver module for convenient placement on the rig floor • 7 day battery life (± 1 day) • Weatherproof

Key Features • Interfaces with existing Frank’s International Advantage computers for a complete ATEX Zone 1 • Torque/turn tubular connection make-up monitoring system

Use in the following applications:

Shelf

Land

Mechanical Performance Torque capacity

± 50,000 ft-lbs

Torque calibration error

± 1% of full scale

Tension capacity

500 tons per API 8C

Mechanical Performance Operational temperature

-20 to 40˚C [-4 to 104˚F]

Storage temperature

-20 to 55˚C [-4 to 131˚F]

Hazardous area

ATEX Class 1 Zone 1

Certification

CE Ex II 2 GD Eex-d[ia] IIC T6, CESI 03 ATEX 174

Physical Attributes Height

41 in [1,041 mm]

Rotational diameter

29 in [737 mm]

Weight

franksinternational.com

950 lbs [430 kg] (estimate)

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 70

DISPLAY™ Digital Application Key Benefits and Features The DISPLAY™ digital application by Frank’s International is a live make-up graph viewing system that allows users to remotely access live and historical data using their computer, tablet or smart phone and analyze connections made throughout the tubular run. This technology improves safety, optimizes efficiency, and ensures well integrity by enabling additional skilled staff to monitor connection make-up activities and make important decisions in real-time. The DISPLAY™ digital application reduces operational costs by using thread reps to monitor and review make-up graphs for multiple jobs from a single location. • Produce overlays to compare graphs • Analyze trends in make-up data, such as delta-torque, delta-turns, shoulder-slope, etc. • View pipe, connection, tong, sensor, and make-up data • View graphs in the same format as displayed on the computer at the rig site

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

This technology works with Frank’s International's Wireless Automated Tong System (WATS) and DATA TREK® advantage Connection Analyzed Make-up (CAM) programs to facilitate live viewing of graphs during all Wi-Fi tong, electric tong, conventional tong, and casing running tool operations. The CAM computer program writes a continuous stream of torque-turn data, which is pushed in a continuous live stream to a Frank's land-based server via a wireless router in the rig's driller's cabin. The router is connected to the client network with access restricted to push data only, in keeping with client data-security requirements. Registered users can access the DISPLAY™ digital application web page to see the live CAM graphs as they are being made up on the rig. The ability to switch between the "live" screen and the "review" screen allows the user to view the live graphs as they are streamed, or review historical graphs from the present or previous jobs.

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 71

Consolidated Control Console Key Benefits and Features • Provides hands-off control for a single operator on multiple tools • Tablet interface allows for operator mobility and driller and supervisor visibility of equipment status • Rig control connectivity and anti-collision systems (or ZMS) available • Dynamic equipment interlocks depending on tools selected to operate • Tubular exchange interlocks involving the auxiliary elevator require driller input before pipe can be released • This functionality can be enabled or disabled depending on the application • Bypass modes can be configured for rig-up and rig-down only, and on a single-use basis • NEC Class 1 Division 1 compliant • Provides control functions for the following standard tools:

Use in the following applications:

Deepwater and ultra-deepwater

franksinternational.com



• Hydraulic Spider/Elevator



• Pneumatic Spider/Elevator



• Automated Single Joint Elevator



• Clamp Type Elevator (CTE™)



• Remote Tong System (RTS/RTS-X) • FLUID GRIP® Remote Tong System

Shelf

Land

For more information call 1-800-833-7265

©2018 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1 - 03/18

page 72

FC-1™ Fill-up and Circulating Tool Key Benefits and Features • 4 1/2-inch to 26-inch fill-up and circulating capabilities for any weight or thread • Accomplishes fill-up by pumping through the top drive • Can accomplish fill-up during casing running • Circulation is achieved by slacking down in order to place the packer cup inside the casing • Reduces rig time by performing fill-up and circulation without rigging-up accessories • Eliminates spilling drilling fluids after fill-up or circulating with a mud saver valve • Improves safety by removing personnel near pressurized lines or valves during fill-up and circulating operations • Axial movement to actuate the mud saver valve not required • During flow-back operations, fluid is transferred from the casing annulus to the mud pits as the casing is lowered into the hole and may be used in tie-backs in cased-hole applications • Flow-back application is intended for circulating conditions on liners and strings with sensitive pressure gradients • Option to add push down plate to 4 1/2-inch to 13 3/8-inch capabilities in order to apply weight from the top drive/hook directly to the casing string to aid in pushing the casing through obstructions

Use in the following applications:

Deepwater and ultra-deepwater

franksinternational.com

Shelf

Land

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 06/17

page 73

Clamp-on Single Joint Manipulator Key Benefits and Features Frank’s International’s Clamp-on Single Joint Manipulator provides an attachment point for a single joint elevator by lengthening the drilling bails past the lower portion of the casing running tool (CRT). • Improves pipe running productivity by as much as 60 percent when used in conjunction with Frank’s International’s HORSESHOE® single joint elevator • Prevents delays from attaching a single joint elevator to long bails by avoiding the necessity to first rig-down the short drilling bails • Enables attachment of a SJE with short bails in place which would otherwise be impossible due to the lower portion of the CRT extending below the lower eyes of the bails • Eradicates the need to rig-down short bails and rig-up long bails for running casing due to its ability to attach directly to drilling bails • Improves safety by eliminating the need to swap different bail lengths • Eliminates inefficiencies and safety risks of mechanical CRTs lacking pipe-pickup mechanisms when retrieving single joints of pipe from the rig V-door by virtue of bails, slings, and link-tilt • Enables the retrieval of single joints of pipe without manual handling of the single joint elevator by coupling to the rig’s linktilt system and improving the reach to the V-door

Shipping Dimensions

Key Features • Lightweight design for easy rig-up, saving time and money

• 1,200 pounds [544 kilograms]

• Operable with all mechanical CRTs and 350- or 500-ton bails

• Overall length of 13.8 feet [4.2 meters]

• Adjustable from extension of 7 – 12 feet [2.1 – 3.7 meters] • Spreader bar allows tool width adjustability to match various top drives • 20-ton safe working load in accordance with API 8C • Controlled by driller via link-tilt Use in the following applications:

franksinternational.com

Shelf

Land

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

page 74 Rev. 2 - 02/17

STAB-RITE™ Key Benefits and Features • Utilizing the STAB-RITE™, in conjunction with Frank's remote control elevators, eliminates the need for derrickmen • Engineered with safety features that prevent unintentional tool deployment and accidental release of pipe • Can reduce crew fatigue • Comes equipped with remote LED lights and audio alarm • Paint scheme enhances visibility • Compliant with the Dropped Object Prevention Scheme (DROPS) • Can interface with rig zone management systems, as well as with rig hydraulic system • When stored in upright locked position, the STAB-RITE™ and its derrick interface do not interfere with normal rig operations • Total rig-up time is less than three hours • Enhances overall safety of pipe running operations • Increases thread reliability and decreases cross-threading by reducing misalignment during make-up

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

The STAB-RITE™ is a remotely operated pipe positioning system designed to enhance rig safety and performance during a variety of casing, tubing, drillpipe, and riser applications. The system’s powerful jaws maintain control of tubulars, reducing crew fatigue during critical pipehandling operations. STAB-RITE™ has the capability to move the pipe safely away from the well center until needed and then to reposition the pipe accurately for initial stab.

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 3 - 02/17

page 75

STAB-RITE Specifications Weight (less calipers)

1,450 pounds (10 foot tool)

Pipe Contact Points

4

Pipe Size Range

2 3/8 inches to 36 inches



Larger sizes may be designed upon request.

Optimum Mounting Heights

25 feet to 32 feet (singles)



45 feet to 55 feet (doubles and triples)

Reach Capabilities:

Minimum Maximum

Longer reaches may be designed upon request. 6 inch, 1 foot, 2 foot, and 2 1/2 foot extensions are available to be used in conjunction with any of the tools.

4 1/2 foot tool

47 7/16 inches

61 11/16 inches

5 foot tool

52 9/16 inches

69 9/16 inches

6 foot tool

60 3/16 inches

87 3/16 inches

7 1/2 foot tool

75 11/16 inches

111 11/16 inches

10 foot tool

105 11/16 inches

141 11/16 inches

Electric Power Unit Specifications Weight

1,650 pounds

Dimensions

42 inches x 42 inches x 53 inches

Power Requirements

480 volts, 3 phase, 30 amps (minimum)

Variable Displacement

0-6 gpm @ 1,500 psi

Hydraulic Fluid

Tellus 46

Use in the following applications:

Other options may be available upon request.

Deepwater and ultra-deepwater

Mid-water shelf

The purpose of the STAB-RITE ZMS System is to prevent a collision between the top drive or elevator and the STAB-RITE Tool when the STAB-RITE is deployed. It accomplishes this by communicating the position of the top drive and elevator and the status of the STAB-RITE Tool to the Driller and STAB-RITE Operator via a combination of visible and audible alarms. The STAB-RITE ZMS System establishes an “unsafe zone” or “collision zone” whenever a STAB-RITE Tool is in the deployed position. The unsafe zone runs from the rig floor to the “unsafe zone ceiling.” The position of the unsafe zone ceiling varies from 10 to 15 feet above a deployed StabRite Tool. When the top drive or elevator is in the unsafe zone, visible and audible alarms will be activated. Whenever a STAB-RITE Tool is in the parked position, there is no unsafe zone, and the top drive movement does not activate any alarms.

franksinternational.com

Land

Air Service Loop Unsafe Zone Ceiling Alarm is not sounding Alarm is sounding

10'-15'

Combination Audible Alarm/Light Pendant

STAB-RITE

8 1 3 5 6

UP

DOWN

Unsafe Zone

Optional Connection to Rig’s Anti-Collision System

For more information call 1-800-833-7265

©2016 Frank’s International. US 7,322,406; 8,051,909; Patent Appl. No. PCT/US2005/024561; No. PCT/US2008/061237. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 05/2016

page 76

Sheaveless COBRA™ Control Line Manipulator Arm Key Benefits and Features • • • • • • • • • • • • • • • • •

Improves safety and efficiency during control line running operations Eliminates sheaves rigged up in derrick Eliminates man-riding activities associated with sheave rigup Control lines can be run from below the rig floor through a mouse hole or from behind the tool Rated to run control lines with a maximum combined breaking strength of 31 tons Quick and easy clamp installation, as Sheaveless COBRA™ presents and holds control lines in the ideal position against tubing Control line integrity management – Sheaveless COBRA™ interlocked with spider Enables off-line rig-up of spoolers and control lines Enables pre-termination of completion assemblies Free-standing set-up; Sheaveless COBRA™ mounts onto its own base-plate for stability Control line and umbilical tension-monitoring system complete with read-out Control line "cut and secure" system allows the driller to cut the control lines safely in the event of dropped string The secure feature holds the cut-ends from the spoolers to prevent uncontrolled backlash of control line towards spoolers Remote operation allows for single handed control of Sheaveless COBRA™, spider, and elevator Electro-hydraulic control system with safety interlocks enhances personnel safety while ensuring control line integrity Drive rollers allow control lines to be driven through the Sheaveless COBRA™ to provide additional line at the rig floor Mechanical safety latches prevent arm from being accidentally lowered during clamp installation

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Specifications Automated Manipulation of Control Line

Interlocks and Docks with Spider

Control Line Pusher Arm

•

COBRA™

•

•

Sheaveless COBRA™

•

•

franksinternational.com

Control Line Tension Monitoring and Emergency Cutting System

Eliminates the Need to Mount Sheaves in Derrick

•

•

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev.2.5 - 03/17

page 77

Manufactured Bowls and Slips Key Benefits and Features • Manufactured out of wrought materials, with no casting • Available in a range of sizes from 4 1/2 inches - 48 inches and tonnages ranging from 350 - 500 tons • Available as manual or pneumatically powered

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Size

Rating

Slip Lift

Power

4 1/2 inches

350 tons

5 1/2 inches

350 tons

6 inches

350 tons

7 5/8 inches

350 tons

•

8 5/8 inches

350 tons

•

9 5/8 inches

350 tons

•

10 3/4 inches

350 tons

•

11 3/4 inches

350 tons

•

11 7/8 inches

350 tons

•

13 3/8 inches

350 tons

•

13 5/8 inches

350 tons

•

14 inches

350 tons

•

16 inches

500 tons

•

18 inches

500 tons

•

18 5/8 inches

500 tons

•

20 inches

500 tons

•

22 inches

500 tons

•

24 inches

500 tons

•

26 inches

500 tons

•

•

28 inches

500 tons

•

•

30 inches

500 tons

•

•

36 inches

500 tons

•

•

38 inches

500 tons

•

•

42 inches

500 tons

•

•

46 inches

500 tons

•

48 inches

500 tons

franksinternational.com

Size

• •

Pipe Range

Dim. A

Dim. B

14 inches

4 1/2 inches 14 inches

14 7/8 inches

46 inches

16 inches

14 inches 16 inches

14 7/8 inches

52 inches

20 inches

16 inches 20 inches

14 7/8 inches

52 inches

24 inches

22 inches 28 inches

14 7/8 inches

60 inches

26 inches

22 inches 26 inches

14 7/8 inches

60 inches

30 inches

24 inches 30 inches

14 7/8 inches

61 inches

36 inches

30 inches 36 inches

14 7/8 inches

76 inches

42 inches

38 inches 42 inches

14 7/8 inches

79 inches

46 inches

46 inches

14 7/8 inches

79 inches

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 78

High Capacity Bails Key Benefits and Features • Frank's International has a extensive inventory of high capacity bails

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Length 750 Ton

15 feet

16 feet

16 feet 8/9 inches

•

•

•

750 x 1,000 Ton

•

1,000 Ton*

•

1,250 Ton*

•

1,500 Ton

17 feet 5 inches

18 feet

20 feet

•

•

•

20 feet 6 inches

22 feet

40 feet

•

•

• •

•

•

•

•1,000 ton and 1,250 ton bails are dimensionally equivalent

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 79

Tong Pusher Arm (TPA) TPA-1, TPA-2, TPA-3

Key Benefits and Features • Hydraulically positions the power tong to enhance safety by removing personnel from the red zone around the rotary, removing potential pinch and trip hazards and reducing crew fatigue in rough conditions • Enables use of remote control power tongs to remove all personnel from the rig floor with wireless control or from the rotary area with console control • Allows optimum orientation and flexibility when placing tongs through power slew and brake features • Features safety devices to limit torque and push forces into derrick structure • Compatible with Frank's International power tongs for pipe up to 42 inches • Multiple size TPAs available to accommodate rig operation requirements

Use in the following applications:

Deepwater and ultra-deepwater

Deepwater Shelf and ultra-deepwater

Land

TPA-1

TPA-2

TPA-3

Stroke

6 feet

8 feet

9 feet

Retracted Length

11 feet

13 feet

10 feet

Reach

6 feet to 22 feet

8 feet to 28 feet

5 feet to 19 feet

Max Hang Line Weight

5,500 pounds

15,000 pounds

10,000 pounds

Max Assembly Weight

2,000 pounds

2,250 pounds

1,000 pounds

Slew Torque

3,300 foot-pounds

18,400 foot-pounds (9,200 foot-pounds per drive)

-

Slew Rotation

360 degrees

360 degrees

-

Slew Brake

pneumatic over hydraulic

hydraulic

-

Tested to operate in up to 3 degrees of rig pitch and roll in most cases.

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 03/17

page 80

ANACONDA® Premium Rack Back Thread Protector Key Benefits and Features • Maximum holding force with patented gripping design; will not slide off • No inflatable parts to puncture • Supports doubles or stands of racked backed casing (tested to 25,000 pounds) • Clamps on pipe body to fully protect threads • 60% faster installation/removal compared to factory protectors • Mill thread protectors can be removed on the pipe rack • Available in 4 1/2 - 18 5/8 inch sizes

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

The ANACONDA® Thread Protector’s patented technology replaces standard thread protectors, fits all thread designs, and is used for rack back casing application. It fits securely on the pipe body to fully protect threads. Simple installation of the ANACONDA® Thread Protector requires no special tools, and removal from the pipe increases safety and efficiency during operation. Rack Back ANACONDA® Thread Protectors are available in various sizes to maximize derrick rack back spacing.

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 5 - 02/17

page 81

Dual Electric Power Unit Key Benefits and Features • Constructed to satisfy the needs of casing tongs, tubing tongs, and the Hawkjaw drill pipe tool by using constant horsepower variable displacement pumps • Increases reliability by the use of two identical pump/ motor combinations • Either pump can be used independently of the other in the event of a failure • Casing tongs can operate at full speed and achieve full torque by using both pumps • Using either pump independently allows casing tongs to achieve full torque at a reduced speed • Tubing tongs and Hawkjaw will run in normal mode with either pump • Approved for use in API, NEC, and CSA Class 1Division 1 Group C/D areas Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Length x Width x Height Weight Max Flow Max Pressure Electrical Hydraulic Tank Capacity Prime Power

96 x 75 x 64 inches [2,440 x 1,905 x 1,626 millimeters] 8,000 pounds [3,630 kilograms] 68 gpm [257 l/m] 3,000 psi [207 bar] 480 volts, 60 cycle, and 3-phase power / 150 amp 150 gallons [568 liters] Two 40 horsepower explosion-proof electric motors

Pump 1 (Use for tubing tongs and casing tongs)

34 gpm @ 2,950 psi [128 l/m @ 203 bar]

Pump 2 (Use for Hawk Jaw and casing tongs)

34 gpm @2,600 psi [128 l/m @ 179 bar]

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 82

Dual Electric Power Unit Oil Cooler • Two pass air-cooler with an explosion proof electric motor. • A thermal switch in the oil reservior activates the cooling fan. • Start up temperature is 130º F. • The cooler may be activated manually by using the three-way selector switch installed in the control panel door. Hydraulic Oil Heater • A 6 kilowatt immersion type oil heater with integral thermostat is mounted on the right lower corner of the oil reservoir. • Maximum thermostat setting is 100º F. Hoses • Two 50 foot X 1 inch two wire braid hydraulic hoses with quick disconnect (female) coupling pressure. • Two 50 foot X 1 1/4 inch two wire braid hydraulic hoses with quick disconnect (male) coupling return. • One 50 foot X 1 inch two-wire braid hydraulic hose with quick disconnect coupling spare. • One return port for equipment case drain hoses. Electrical Connections • Equipped with 100 foot power cord and a remote start/stop pendant, also with 100 foot cord. • Should be connected to a 480 volt, 3 phase, 60 hertz electrical supply by a qualified electrician. Lifting Procedures • The dual electric power unit can be lifted with either a forklift truck or overhead crane with a 4-part sling. Each corner of the frame has a padeye drilled for a 7/8 inch shackle.

franksinternational.com

For more information call 1-800-833-7265

©2016 Frank’s International. All Rights Reserved. US Patent No. US6634259; US Appl. No. 10/021,225. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1

page 83

Hydraulic Distribution Module The Hydraulic Distribution Module (HDM) is designed to supply hydraulic power from a closed-center rig hydraulic system to a suite of up to four pieces of equipment. Key Benefits and Features • Four pairs of hydraulic outlet supplies • Adjustable hydraulic outlet pressure 200-3000 pounds per square inch • Adjustable hydraulic outlet flow from 0.2 - 50 gallons per minute • Two of the hydraulic supplies maintain constant pressure (suitable for FMS, FA-1®, and other hydraulic consoles) • Two of the supplies are piloted-on, intended for either local control or remote control tong systems. Hydraulic power is switched on and off using remote foot pedals • Four pneumatic outlets filtered, lubricated, and regulated to 100 psi • Four case-drains • Return line filtration to 10 microns (sufficient to maintain NAS 6 cleanliness) • ESD to shut-off all hydraulic outputs, and can be equipped with remote ESD option • High Backpressure Automatic Shutdown circuit triggers ESD when return line is restricted or blocked

Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

Specifications Weight

1,000 pounds [454 kilograms]

Max Hydraulic Inlet Operating Pressure

3,900 psi [269 bar]

Max Hydraulic Return Line Pressure

350 psi [24 bar]

Max Pneumatic Supply Pressure

250 psi [17 bar]

Maximum Hydraulic Combined Flow-rate

60 gallons per minute [227 liters per minute]

Envelope Dimensions lxwxh (excluding hose exits on front and rear)

30 x 30 x 38 inches [762 x 762 x 965 millimeters]

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 84

CBI™ Cutting Bed Impeller Key Benefits and Features • Reduces torque and drag on the string while in drilling mode • Reduces frequency of twist-offs • Ensures cleaner and more stable hole conditions • Reduces drilling costs • One piece mandrel with mechanical properties which exceed the drillpipe in which it is placed. • Hydraulic and mechanical dual acting mechanism to remove cuttings beds. • The tool is designed to be stronger than most premium drillpipe in which it would be placed. Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

The CBI™ Cutting Bed Impeller is a downhole drill string tool intended for use in deviated wells, where excessive buildup of cuttings causes drilling problems. The CBI™ Cutting Bed Impeller is an integral drill string component consisting of a short mandrel with no moving parts. It is shaped in such a way as to stimulate any cuttings, which have a tendency to settle out of the mud in the high angled sections of the well bore. These sections could be inside the casing or in open hole; the tool adapts to suit several environments.

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 3 - 02/17

page 85

HI Tool® Harmonic Isolation Tool Key Benefits and Features • Limits lateral and axial vibration problems in difficult formations, which reduces non-productive time (NPT) • Reduces the dynamic interaction between the bottom-hole assembly (BHA) and drill bit, through a flexible geared connection • Decouples the BHA and mud motor harmonics from the drill bit and drill string • Decouples the BHA from the drill string harmonics in severe drilling applications • Allows the drill bit to self-center dynamically Use in the following applications:

Deepwater and ultra-deepwater

Shelf

Land

The HI Tool® Harmonic Isolation Tool is an on-bottom drilling tool, designed to reduce vibrational loads generated by drill bit dynamics. Drill string vibrations are typically the most common cause of NPT for the operators and suppliers of complex MWD/LWD equipment. Extensive job history with the HI Tool® has shown results for operators, with a direct impact on reduction of drilling costs in both domestic and international markets. Internal View

franksinternational.com

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 2 - 02/17

page 86

DSTR™ Drill String Torque Reducer Key Benefits and Features • 5 inch, 5 1/2 inch and 6 5/8 inch sizes • Reduces friction factor • Can withstand 14,000 lbf side force • One piece mandrel with mechanical properties exceeds the specification of the drillpipe • Overall dimensions permits use within standard drilling stand and average derrick height • Durable design allows for optimization in the harshest of well profiles and environments • Dual sleeve retention mechanism for downhole reliability

Use in the following applications:

Deepwater and ultra-deepwater

Frank's Drill String Torque Reducer (DSTR™) is a drill string tool intended for use in deviated wells where excessive rotary torque causes drilling and casing wear problems. This tool is an integral component consisting of a short mandrel fitted with a bearing supported non-rotating sleeve. It is designed to be positioned between the connections of the drillpipe at the well radius section of the hole. Achieving an international award for innovation at the Houston oil show in 1996, the tool is now acknowledged as the industry standard.

franksinternational.com

Shelf

Land

Another benefit seen with the tool is the reduction of casing wear. For a given deviation profile, the applications program assists in maximizing the tools performance by determining the deployment in the critical sections of the borehole. However, for most extended reach drilling applications, the tools are used in the build sections of the borehole, helping to extend the envelope of rotary drilling.

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 3 - 02/17

page 87

SHARK BITE® Anti-rotation Device Key Benefits and Features • Compatible with all float equipment and plugs

Non-rotating Plug Device

• Quick and simple installation in the field or shop • Available in all casing sizes, 4 1/2 inches through 20 inches • 100% PDC drillable • Operating temperatures up to 300° F

Float Collar

• Works with all drilling fluids

Shoe Joint

Float Shoe

Use in the following applications:

Deepwater and ultra-deepwater

franksinternational.com

Shelf

Land

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev.3 - 02/17

page 88

VERSAFLO™ Casing and Drill Pipe Flowback and Circulation Tool Key Benefits and Features • Drill pipe and casing flowback/circulation capability • Casing Module is efficiently rigged down with a special breakout plate that holds the backup against the rig's bails • Drill Pipe Module is ready to stab into the landing string after connecting a packer cup • Casing Module (lower portion of VERSAFLO™ tool)

• Packer cup seal assembly can be outfitted to stab into a range of casing sizes from 8 5/8-inch to 18 5/8-inch



• Fill-up can be accomplished while casing is being run; no shut down required



• Automatically-operated internal valve prevents unwanted drilling fluid spilling out on the rig floor



• Capable of sealing up to 5,000 psi

• Drill Pipe Module (upper portion of VERSAFLO™ tool)

• Hydraulically-operated piston allows stabbing into drill string for circulation and flowback operations



• Wireless controls allow tool operations from outside of the red zone



• Special packer cup creates an effective seal on a range of drill pipe IDs



• Automatically-operated internal fluid valve prevents unwanted drilling fluid spilling out on the rig floor



• Hydraulic swivel allows rotation without the need to disconnect umbilical lines



• The drill pipe module can be screwed into a 6 5/8-inch full hole drill pipe connection without the need to disconnect or remove the piston or the packer cup from the ID of the drill string



• Compact tool design allows the use of 16-foot bails based on rig survey

Use in the following applications:

franksinternational.com

Deepwater and ultra-deepwater

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1 - 08/17

page 89

VERSAFLO™ Casing and Drill Pipe Flowback and Circulation Tool Operation

Hydraulic (via wireless control)

Tensile Capacity

2,000,000 pounds [1.31 safety factor]

Minimum Flow Area

3.258 inches² [2,102 millimeters²]

Max Operating Pressure

5,000 psig [34.5 Megapascals]

Stroke

24 inches [610 millimeters]

Minimum Bails Required

16.6 feet [5060 millimeters] 

Optimum Makeup Torque

58,800 ft-lbs

Maximum Makeup Torque

70,000 ft-lbs

Maximum Mud Flow Rate

750 gallons per minute [2,840 litres per minute]

Box/Pin Connection

API 6 5/8 full hole

Use in the following applications:

Casing Configuration

franksinternational.com

Deepwater and ultra-deepwater

Drill Pipe Configuration

For more information call 1-800-833-7265

©2017 Frank’s International. All Rights Reserved. Notice: this product is protected by one or more patents. For more information regarding Frank’s International’s patents, please go to: www.franksinternational.com/patents/. Frank’s International products and services are subject to the Company’s standard terms and conditions, available on request. Unless noted otherwise, trademarks and service marks herein are the property of Frank’s International. Product and service information and/or specifications are subject to change without notice. For more information please contact an authorized Frank’s International representative.

Rev. 1 - 08/17

page 90

XTREME3™ Connector Key Benefits and Features • Tapered shoulder keeps seals engaged while in tension by suppressing radial deflection • Increased shoulder torque helps resist back-out due to vibration • Angle of thread cone allows for optimized stress distribution across the thread pattern and a centered load distribution in relation to the pipe wall • Negative load flank on the teeth keeps the threads engaged under loading and prevents “jump-out” • Optimized thread relief grooves alleviate stress in critical locations on the connector • A deep-stab, lower alignment face allows for quicker make-up and cross-thread prevention • Featured reservoirs reduce excess dope build-up and subsequent dope pressure • Environmental metal seal allows for a more reliable seal at higher pressures • Half-dovetail groove prevents the elastomeric o-ring from interfering with make-up Elastic/Plastic Finite Element Analysis Physical Testing: ISO 13679:2002 Modified CAL 1 Series B with Gas and Bending Harmonic Fatigue Testing Use in the following applications:

Deepwater and ultra-deepwater

Shelf

The XTREME3™ Connector is a deepwater-ready, premium threaded connection featuring a standard metal seal and a negative load flank, ensuring increased performance and reliability. This connector was developed for the three provinces governing its name: extreme tension, extreme compression, and extreme bending.

Specifications Size Range

20 inches to 42 inches

Shouldering Torque Range (min / max), ft-lbs

24,000 / 50,000

Break-Out Torque Range (min / max), ft-lbs

65,000 / 85,000

Thread Starts Turns to Make-Up

Single / Multi 3.5 /