DIN EN 13530-2/A1: Large Transportable Vacuum Insulated Vessels [PDF]

Zitiervorschau

June 2004

D EUTSCHE NORM

{

DIN EN 13530-2/A1

Modifies DIN EN 13530-2, January 2003 edition.

ICS 23.020.40

Cryogenic vessels

Large transportable vacuum insulated vessels Part 2: Design, fabrication, inspection and testing English version of DIN EN 13530-2 : 2002/A1 : 2004

Kryo-Behälter – Große ortsbewegliche vakuum-isolierte Behälter – Teil 2: Bemessung, Herstellung und Prüfung (Änderung A1)

European Standard EN 13530-2 : 2002/A1 : 2004 has the status of a DIN Standard. A comma is used as the decimal marker.

National foreword This amendment has been prepared by CEN/TC 268 ‘Cryogenic vessels’ (Secretariat: France). The responsible German body involved in its preparation was the Normenausschuss Druckgasanlagen (Pressure Vessels Standards Committee).

Continued overleaf. Document comprises 4 pages.

© No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards Licensed (DIN-Normen). to turk loydu/turk loydu

English price group 5 www.din.de www.beuth.de

ANSI Store order #X213107 Downloaded: 10/13/2005 2:57:04 AM ET Single user license only. Copying and networking prohibited.

?)N

09.04

9573572

Licensed to turk loydu/turk loydu ANSI Store order #X213107 Downloaded: 10/13/2005 2:57:04 AM ET Single user license only. Copying and networking prohibited.

EN 13530-2/A1 March 2004

ICS 23.020.40

English version Cryogenic vessels

Large transportable vacuum insulated vessels Part 2: Design, fabrication, inspection and testing (Amendment A1) Récipients cryogéniques – Grands récipients transportables isolés sous vide – Partie 2: Conception, fabrication, inspection et essais (Amendement A1)

Kryo-Behälter – Große ortsbewegliche vakuum-isolierte Behälter – Teil 2: Bemessung, Herstellung und Prüfung (Änderung A1)

This amendment modifies the European Standard EN 13530-2 : 2002. It was approved by CEN on 2004-01-09. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.

ÈÉË European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung Management Centre: rue de Stassart 36, B-1050 Brussels

© 2004. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members.

Ref. No. EN 13530-2 : 2002/A1 : 2004 E

Licensed to turk loydu/turk loydu ANSI Store order #X213107 Downloaded: 10/13/2005 2:57:04 AM ET Single user license only. Copying and networking prohibited.

Page 2 EN 13530-2 : 2002/A1 : 2004

Licensed to turk loydu/turk loydu ANSI Store order #X213107 Downloaded: 10/13/2005 2:57:04 AM ET Single user license only. Copying and networking prohibited.

Page 3 EN 13530-2 : 2002/A1 : 2004

Licensed to turk loydu/turk loydu ANSI Store order #X213107 Downloaded: 10/13/2005 2:57:04 AM ET Single user license only. Copying and networking prohibited.