Answers [PDF]

Zitiervorschau

Лист1 № 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Вопрос Where do you set the Safety Depth? Where do you set the Shallow Contour? Where do you set the Deep Contour? Where do you set the Safety Contour? Where do you set the Shallow Pattern? Where do you set up the Safety Contour used for planning your route? Where do you set up the chart watch sector to scan the ENCs for problems along own ship's heading line? Where do you set system priority of multiple GPS connected to the FURUNO ECDIS? What does the alert number 820 indicate? What does the alert number 450 indicate? What does the alert number 495 indicate? What does the alert number 380 indicate? What does the alert number 635 indicate? What does the alert number 640 indicate? What does the alert number 031 indicate? What does the alert number 257 indicate? What does the alert number 470 indicate? Where do you switch between Multicolor and Two Color settings for the charts? When an ENC is outlined in Green in the Chart Catalogue - it means? When an ENC is outlined in Orange in the Chart Catalogue it means? When an ENC is outlined in Magenta in the Chart Catalogue - it means? When an ENC is outlined in Yellow in the Chart Catalogue it means? When an ENC is outlined in Red in the Chart Catalogue - it means? When an ENC is outlined in Blue in the Chart Catalogue - it means? Where do you select the color Palette used to display the charts? Where do you control the settings and visibility of the chart layers? Where do you control the AIO? Where do you control the Safety Contour displayed on the Charts on the FURUNO ECDIS? Where do you control the visibility of the user overlays (User Chart - Route - etc.)?

Ответ №1 In Chart Legend In Chart Legend In Chart Legend In Chart Legend In Chart Display On the Parameters tab of the Route Planning tool. In Chart Display settings In the Sensor dialogue AIS lost Route: Illegal To WPT Anchor watch error Route: File read error No official data Datum mismatch Sensor adapter 1 COM timeout Heading sensor not available WGS 84 not used In Chart Legend License is valid - chart is up-to-date. License is valid - chart is up-to-date. License is valid - chart is up-to-date. License is valid - chart is NOT up-todate. License is valid - chart is NOT up-todate. License is valid - chart is up-to-date. In Chart Legend In Chart Legend In Chart Legend In Chart Alert In Chart Legend

30

Which operation can you perform on the FURUNO ECDIS?

I can record target ship's positions in the Voyage log automatically.

31

Which operation can you perform on the FURUNO ECDIS?

I can record my position manually on the ENCs.

32

Which operation can you perform on the FURUNO ECDIS?

I can play back my ship's past track on the ECDIS.

Страница 1

Лист1 33

Which operation can you perform during a voyage?

I can use the Event function to record special events in the Event Log.

34

Which operation can you perform during a voyage or after completion of a voyage?

I can use the Event function to record special events in the Details Log.

35

Which operation can you perform during a voyage or after completion of a voyage?

36

Which operation can you perform after completion of a voyage?

37

Which operation can you perform with the FURUNO ECDIS?

38

Can you plan a route while you monitor another route?

39

When do you use a Manual Update?

I can use the Record function to record special events in the Voyage Log. I can add additional records of manual positions to the Voyage Log adding further detail to the past Voyage. I can send my Route Plan and User Chart to any RADAR for display on the RADAR. No Always when I have to update my charts.

Which of these settings generate an alarm from the Chart Alert setting? What should you remember to set up before planning a route? What should you remember to set up first when planning a route?

The settings for the Voyage Log

43

Can you move your User Chart from one FURUNO ECDIS to another?

No

44

What should you do if you have to leave your planned route during a voyage?

Switch off the FURUNO ECDIS and concentrate on the RADAR.

40 41 42

45 46 47 48 49 50 51 52 53

When an ENC is outlined in Green in the Chart Catalogue - it means? When an ENC is outlined in Orange in the Chart Catalogue it means? When an ENC is outlined in Magenta in the Chart Catalogue - it means? When an ENC is outlined in Yellow in the Chart Catalogue it means? When an ENC is outlined in Red in the Chart Catalogue - it means? When an ENC is outlined in Blue in the Chart Catalogue - it means? How do you switch from Vector chart to Raster chart on the FURUNO ECDIS? How do you switch from Raster chart to Vector chart on the FURUNO ECDIS? How do you get information on an ENC object (Buoy Beacon - Berth etc.) on the FURUNO ECDIS?

Страница 2

Shallow Contour

The settings for the Voyage Log

License is valid - chart is up-to-date. License is valid - chart is up-to-date. License is valid - chart is up-to-date. License is valid - chart is NOT up-todate. License is valid - chart is NOT up-todate. License is valid - chart is up-to-date. I select Raster chart in the Main menu. I select ENC in the Main menu. I right click on the User Chart function in the route planning tool.

Лист1 How do you record Own Ship's position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?

I cannot record own ship's position manually on the FURUNO ECDIS.

How do you document your previous voyage on the FURUNO ECDIS? How do you manually record Own Ship's current position in the Logs?

I use my paper Logbook as documentation. By opening the Voyage Log and entering the current position.

57

How do you delete a specific object added using the Manual Update function?

I select Clear in the Manual Update window.

58

How do you modify an existing Manual Update object?

59

How do you hide (not delete) a Manual Update object?

60

How do you update your vector charts on the Furuno ECDIS using the ENC Update CD?

I use the AutoLoad function.

61

How do you update your raster charts on the Furuno ECDIS using the RNC Update CD?

I use the AutoLoad function.

62

How do you select which User Chart to monitor?

63

How do you enter informative notes in the User Chart?

64

How do you change the User Chart being used for monitoring?

65

How do you open the User Chart planning tool?

66

How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by Notices To Mariners?

67

How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by a Navtex message?

68

How do you add navigational chart objects to the FURUNO ECDIS when you are required to do so by information received via VHF broadcast?

69

How do you save your route to the Hard Disc Drive when it has been edited?

70

How do you start the route planning tool?

54 55 56

71 72 73 74 75

How do you switch the Kalman filter on or off? Which color scheme is used for a Manual update on the Furuno ECDIS? Which ECDIS setting is activated in Ship and Route Parameters? Which ECDIS setting is adjusted in Ship and Route Parameters? Which ECDIS setting is adjusted in Ship and Route Parameters?

Страница 3

I use the ENC tab of the Chart Maintenance function. I select Clear from the Manual Updates menu.

By linking it to the monitored Route Plan in the route planning tool. I select Note as an option for the Area Line or Circle where the information should be displayed. I move the monitored route plan to planning mode and edit the Linked User Chart setting. I select "Planning" and then "User Chart" in the Quick Access bar when in Plan mode. I cannot add any chart objects to the ECDIS unless they are included in the weekly update CDs. I cannot add any chart objects to the ECDIS unless they are included in the weekly update CDs. I cannot add any chart objects to the ECDIS unless they are included in the weekly update CDs. I don't. The route is automatically saved to the hard disc drive whenever changes are applied. I press Plan on the Control Unit. The Kalman filter is always switched on when a route is put into monitor mode and switched off when there is no route being monitored Blue ENC symbols Gyro Error Chart alignment Position offset

Лист1 76

Can you set the overall maximum speed for a route plan?

77

Where can manual Updates be displayed? Can you open the route planning tool when the ECDIS is in Chart mode?

78

Yes in the Ship and Route parameters of the Menu. Only on ENCs Yes if I open the Menu dialogue first.

79

Which information can you find in the Vector Chart Legend?

Magnetic Variation

80

Which information can you find in the Vector Chart Legend?

T&&P Notices

81

Which information can you find in the Vector Chart Legend?

Notices To Mariners

82

Which information can you find in the Raster Chart Legend?

Magnetic Variation

83

Which information can you find in the Raster Chart Legend?

Horizontal datum

84

Which information can you find in the Raster Chart Legend?

Shallow Contour

85

Which information can you find in the Raster Chart Legend?

Edition number

86

Which operation can you perform on the FURUNO ECDIS?

I can record target ship's positions in the Voyage log automatically.

87

Which operation can you perform on the FURUNO ECDIS?

I can record my position manually on the ENCs.

88

Which operation can you perform on the FURUNO ECDIS?

I can play back my ship's past track on the ECDIS.

89

Which operation can you perform during a voyage?

I can use the Event function to record special events in the Event Log.

90

Which operation can you perform during a voyage or after completion of a voyage?

I can use the Event function to record special events in the Details Log.

91

Which operation can you perform during a voyage or after completion of a voyage?

92

Which operation can you perform after completion of a voyage?

93 94 95 96

Which recording function is available in the FURUNO ECDIS? Which recording function is available in the FURUNO ECDIS? Which recording function is available in the FURUNO ECDIS? Which color scheme is used for a Manual update on the Furuno ECDIS?

97

Which Manual Update objects can be hidden from view by operator selection?

98

How do you select Which User Chart to monitor?

99 100

Which printing option is available for the User Chart? Which printing option is available for the User Chart?

Страница 4

I can use the Record function to record special events in the Voyage Log. I can add additional records of manual positions to the Voyage Log adding further detail to the past Voyage. Danger Targets Log AIS Log Gyro Log Blue ENC symbols Only the Manual Updates Special Areas (from the Chart Display dialogue) By linking it to the monitored Route Plan in the route planning tool. Tidal Report Full report

Лист1 101 102 103 104

Which printing option is available for the User Chart? Which printing option is available for the User Chart? Which printing option is available for the User Chart? Which printing option is available for the User Chart?

105

How can you tell if your FURUNO ECDIS is displaying an ENC?

106

How can you see if a chart object is created using Manual Updates?

The Manual Update will be larger than any other chart objects.

107

How can you verify which User Chart is being monitored?

The name of the User Chart will be displayed in the top right corner of the ECDIS screen.

108

How can you verify which route is being monitored?

109

How can you verify which route is being monitored?

110

How can you reset the trip counter?

111

How can you reset the odometer?

112 113

Where can you find information concerning the charts stored on the HDD? Where can you find a list of the Manual Updates that have been applied to the Furuno ECDIS?

Full report Full report Circle Report Label Report There is an "ENC Data available" indication in the Own Ship Functions Box.

The name of the route will be displayed on my own ship vector. By clicking on "Route" and then on "Route Info" in the Quick Access Sidebar in Plan mode. I can reset the Trip Counter by resetting the Voyage Log in the Reset submenu of the Record menu. I can reset the odometer from the Voyage tab of the Menu. On the Internet. In the Chart Legend

114

Where can you update the ENCs?

In the Chart Manager (Individual Update)

115

Where can you update the RNCs on the Furuno ECDIS?

In the Update function of the Menu

116 117

Where can you enter informative notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS? Where can you display your planned or monitored User Chart on the FURUNO ECDIS?

In the Voyage Log Only on official charts Nowhere - because I must never change the setting for the Safety Contour. Nowhere - because I must never change the setting for the Safety Contour.

118

Where can you change the setting of the Safety Contour which is used during planning of a route?

119

Where can you change the settings for the Safety Contour used for monitoring?

120

Can you edit the User Chart when the ECDIS is in Navi mode?

Yes

121

Can you edit a route without removing it from the route monitoring function?

No

122

Can you copy your Manual Updates from one FURUNO ECDIS to another?

No

123

What is a Manual Update?

A Manual update is an update applied using the Manual function in Load && Update Charts.

Страница 5

Лист1 124 125

What is the recommended loading sequence when you receive new charts - updates and permits? What is the name of category of charts generated by the user to draw up contingency areas - No Go areas - clearing lines etc.?

There is no recommended sequence. Private Chart

126

What is a Point in the User Chart?

A point is used to create a Manual Update from a chart object.

127

What is Kalman filter in the FURUNO ECDIS?

The Kalman Filter is a noise filter which improves the precision of the charts.

128

What is the maximum limit of the Check Area?

No limit

129

What is the purpose of Kalman Filter?

The Kalman Filter is the Antivirus software running on the FURUNO ECDIS.

137 138

Where do you find information on Magnetic Variation in In Chart Display the ENCs on the FURUNO ECDIS? Where do you find information on the presentation In the Basic Setting of the Menu library used in the FURUNO ECDIS? Where do you find information on the software version In the Voyage Log of the FURUNO ECDIS? Where do you find information on the Conning software In the Voyage Log version of the FURUNO ECDIS? Where do you find information on the C-Map SDK (Software Developers Kit) software version of the In the Voyage Log FURUNO ECDIS? Where do you change the visibility of your Monitored In Chart Legend route? Where do you change the display of Own Ship Past In the Information Sidebar Track and other user overlays? Where do you change the Velocity Vectors style? In the Quick Access bar Where do you change the Ship Outlines? In the Quick Access bar

139

Where do you change the Target past position density?

In the Quick Access bar

140 141 142

Where do you change the Targets color? Where do you change the Tracked Target size? Where do you change the visibility of your Circles?

In the Quick Access bar In the Quick Access bar In Chart Legend

143

Where do you change the visibility of your User Chart?

130 131 132 133 134 135 136

144 145

146

Where do you change the visibility of your Planned route? Where do you offset own ship chart position on the FURUNO ECDIS?

How are regular T&Ps updated on the ECDIS?

Страница 6

In Chart Legend In Chart Legend In Symbol Display

T&&Ps must always be created as Manual Updates.

Лист1

147

How are loaded ENCs converted into SENCs when updating?

Страница 7

The FURUNO ECDIS will normally convert the ENCs to SENCs automatically.

Лист1 Ответ №2 In Symbol Display In Symbol Display In Symbol Display In Symbol Display In Symbol Display

Ответ №3 In Chart Alert In Chart Alert In Chart Alert In Chart Alert In Basic Setting

In Chart Display

In Chart Alert settings

In Chart Alert settings

In Basic settings

In Basic Setting

In Ship and Route Parameters

TT lost RADAR comm. error Track control stopped User chart: File not found Log error Chart align: Over 30 min. Sensor adapter 2 COM timeout Prg track: Need higher speed Different geodetic datum

Navtex message received LAN adapter version error Steering parameter error AIS COM error Dual axis log (WT) error RADAR antenna ID error Sensor adapter 3 COM timeout Prg track: Use radius Ctrl Sentence syntax error

In Symbol Display

In Basic Setting

License is valid - chart is NOT up-todate. License is valid - chart is NOT up-todate. License is valid - chart is NOT up-todate License is available - chart not installed. License is available - chart not installed. License is valid - chart is NOT up-todate.

License is available - chart not installed. License is available - chart not installed. License is available - chart not installed License is valid - up-to-date status doubtful. License is valid - up-to-date status doubtful. License is available - chart not installed.

In Chart Display

In Quick Access Bar

In Symbol Display

In Chart Display

In Symbol Display In the route planning tool - on the Alerts tab

In Chart Display

In Symbol Display

In Chart Display

I can record a position fix manually by using just one distance and one bearing.

I can playback my past voyage track on the charts.

In Chart Display

I can set Ship's maximum height to I can set the ECDIS to automatically enable chart alerts from areas in the choosing a Safety Contour based on charts where there is not sufficient air my setting of Ship's maximum draft. draft. I can create Notes from my Voyage I can record my position manually on Log to document a voyage on the the RNCs. charts.

Страница 8

Лист1 I can create a User Chart from the Alert Log and save it to a USB memory device. I can view and print a copy of the Voyage Log. I can create and save a screen shot for future reference.

I can create a User Chart from the Chart Usage Log and save it to a USB memory device. I can create a backup copy of Own Ship's past track (120 minutes max.) on a USB memory device and keep the copy in a safe location for future reference. I can view and print a copy of the Details Log.

I can create a User Chart from the I can create a backup copy of the monitored Route Plan and save it to a Voyage log on a USB memory device. USB memory device. I can send my Route Plan and User I can send my Route Plan and User Chart to any AIS for display on the Chart to any GPS for display on the AIS. GPS. Yes the route planning function is Yes but only if I have two ECDIS. independent from the route monitoring function. When I receive information which must be displayed on my ECDIS and I should never use Manual Updates. this is not yet included in the official weekly updates. Safety Depth

Safety Contour

The Alarm Level in the Operation submenu. The Alarm Level in the Operation submenu

The Conning Display in Installation Parameters. The Safety Contour in the route planning tool Yes by using the Export/Import tool in the Settings function of the Status Bar.

Yes but only by using the harmonization process. Disable the route monitoring on the FURUNO ECDIS.

Change the display of the FURUNO ECDIS to IMO All Other.

License is valid - chart is NOT up-todate. License is valid - chart is NOT up-todate. License is valid - chart is NOT up-todate License is available - chart not installed. License is available - chart not installed. License is valid - chart is NOT up-todate.

License is available - chart not installed. License is available - chart not installed. License is available - chart not installed License is valid - up-to-date status doubtful. License is valid - up-to-date status doubtful. License is available - chart not installed. I select Raster chart from the drop down list in the Status Bar. I select Vector chart from the drop down list in the Status Bar.

I select RNC in the Chart Legend. I select Vector chart in the Chart Legend. I click on the Chart Info in the Instant Access Bar.

I center click on the object.

Страница 9

Лист1 I record LOP in the Record function of the Event Log.

I press the [CTRL] && [ACQ/ACT] button on the Control Unit.

I use my paper Logbook and my VDR I use the tracking function in the or SVDR as documentation. symbol display. By right clicking on own ship icon on By pressing the Record button on the the user interface. Control Unit. I use the Delete function in the File Export tool.

I right click on the object and use the Manual Update window to delete it.

I use the Mariner tab of the Symbol Display function. I select Undo Last from the Manual Updates menu.

I cannot modify a Manual Update only delete it. I deselect that general type of chart object in the Chart Display dialogue.

I create a Manual Update from the information on the CD.

I create a User Chart.

I create a Manual Update from the information on the CD.

I cannot update the raster charts using an RNC update CD.

By clicking Display - User Chart in By right clicking on the chart area. the Quick Access Bar. I select Note as an option for the Tidal I select User Chart from the Main Label or Clearing Line where the menu and then I select Plan and enter information should be displayed. the note to be displayed. I select User Chart from the Planning I select a different user chart from the sidebar and then I select Monitor for Menu to monitor. the desired user chart. I select "Planning" and then "User I Select Manual Update from the Chart" in the Quick Access bar when Menu in Charts mode. in Navi mode. I use the Manual Updates function.

I use the User Chart function.

I use the Manual Updates function.

I use the User Chart function.

I use the Manual Updates function.

I use the User Chart function.

I click on Save or Save As in the Route Planning tool.

I select Save in the Backup and Restore dialogue.

I click on the Route icon in the Status bar.

I select Route Plan from the Menu dialogue.

The Kalman filter is always on so I never have to switch it on or off.

The Kalman filter is switched on or off in the Sensor menu on the Position tab.

Standard ENC symbols

Orange ENC symbols

Safety Contour

Notes alarm times

Safety Contour

Maximum rate of turn

Safety Contour

Alarm volume

Страница 10

Лист1 Yes in Chart Display.

Yes in Optimization parameters.

Only on RNCs Yes if I right click on the chart and select Event.

Only on Vector charts Yes if I select Plan in the Chart Catalogue.

Base CD number

Permit expiration date

Name

Warnings

Presentation Library edition number

Chart edition && Update date

Safety Contour setting

Quality of data

Safety Depth

User Permit number

Chart Name

Chart Viewing date

Last displayed update

Edition date

I can record a position fix manually by using just one distance and one bearing.

I can playback my past voyage track on the charts.

I can set Ship's maximum height to I can set the ECDIS to automatically enable chart alerts from areas in the choosing a Safety Contour based on charts where there is not sufficient air my setting of Ship's maximum draft. draft. I can create Notes from my Voyage I can record my position manually on Log to document a voyage on the the RNCs. charts. I can create a User Chart from the I can create a User Chart from the Alert Log and save it to a USB Chart Usage Log and save it to a USB memory device. memory device. I can create a backup copy of Own Ship's past track (120 minutes max.) I can view and print a copy of the on a USB memory device and keep Voyage Log. the copy in a safe location for future reference. I can create and save a screen shot for future reference.

I can view and print a copy of the Details Log.

I can create a User Chart from the I can create a backup copy of the monitored Route Plan and save it to a Voyage log on a USB memory device. USB memory device. Engine Log

Speed Log

Engine Log

Voyage Log

Engine Log

Ship's Log

Standard ENC symbols

Orange ENC symbols

All manual Updates objects(from the Chart Display dialogue)

Only the Manual Updates Buoys (from the Chart Display dialogue)

By clicking Display - User Chart in the Quick Access Bar. Full report Line Report

By right clicking on the chart area. System report System report

Страница 11

Лист1 System report System report Full report Full report

Clearing Line Report Detailed report System report System report The FURUNO ECDIS will give an There is an "RNC data" indication in audible alarm if I am not viewing an the Own Ship Functions Box. ENC. It is always shown in red.

It will have a special orange marker.

By clicking on "Route" and then on The name of the User Chart will be "Route Info" in the Quick Access Bar displayed in the Information Sidebar. when in Plan mode. The name of the route will be displayed in the Route Information By right clicking on own ship icon. box. By clicking on "Route" and then on The name of the route will be "Route Info" in the Quick Access displayed in the Status Bar. Sidebar in Navi mode. I can reset the Trip Counter by resetting it in the Voyage tab of the I cannot reset the Trip Counter. Menu. I can reset the odometer from the I can reset the odometer from the Sensor Setting dialogue. Symbol Display dialogue. The Chief Officer will know.

In the chart catalogue.

In the Manual Update Window

In the Chart Catalogue

In the Update function of the Chart Display In the Chart Manager (Individual Update)

In the Update function of the System Settings In the Update function of the Chart Catalogue

In the Pilot Data

In the User Event function

On all charts

Only on vector charts

In the Settings menu and I can only change the setting if I have the service password. In the Settings menu and I can only change the setting if I have the service password. Only if the User Chart is not linked to a route plan.

In Chart Alert In Chart Alert. Yes if the User Chart contains no Tidal information.

Yes but I must copy it to another Yes if I create a copy of the route plan ECDIS where it can be edited without in ANTS format on a USB and edit interfering with the monitoring the file on a normal office PC. function of the FURUNO ECDIS. Yes - by using the Backup and Yes - by sending the Manual updates Restore dialogue to transfer the via an email. Manual Updates to a USB. A Manual update is an update to the charts created by the operator from A Manual update is an update applied to the charts by an official information received from the Pilot a Navtex message - a VHF broadcast representative of the chart producer. etc.

Страница 12

Лист1 #1:Base CDs #2:Update CD #3:Permit #1:Permit #2:Update CD #3:Base CDs Pilot Data

User Chart

A point is used to denote/highlight the position of a chart object with the User Chart.

A point is the end of a User Chart.

The Kalman Filter is a filter which continuously monitors the status and validity of the navigation sensor inputs. 240min. + 20NM + 5km + 999m 120min. + 10NM + 3km + 500m The filter is used to calculate an The filter continuously monitors the astronomical position from several position given by each individual astronomical observations entered by position sensor to determine if the the operator. sensor is reliable or not. The Kalman filter is a filter which reduces the time it takes for the ECDIS to start up.

In Chart Catalogue

In Chart Alert

In the Record function of the Quick Access bar In the System dialogue of the Menu In the System dialogue of the Menu

In the System Dialogue of the Menu In the About dialogue In the About dialogue

In the System dialogue of the Menu

In the About dialogue

In Symbol Display

In Chart Display

In Chart Display

In Symbol Display

In Chart Display In Chart Display

In Symbol Display In Symbol Display

In Chart Display

In Symbol Display

In Chart Display In Chart Display In Symbol Display

In Symbol Display In Symbol Display In Chart Display

In Symbol Display

In Chart Display

In Symbol Display

In Chart Display

In Chart Display

In Chart Menu

I create a Manual Update containing the T&&Ps using the Manual function in the Load && Update function of the Chart Menu.

Most T&&Ps are included in the weekly update CD and these are updated automatically together with the other updates on the CD.

Страница 13

Лист1

I must use the conversion tool from the Menu.

I cannot convert ENCs into SENCs.

Страница 14

Лист1 Ответ №4 In Chart Display In Chart Display In Chart Display In Chart Display In Chart Catalogue In Own Ship settings In Check Area settings In Nav Tools Cross track alarm Heading sensor not available Filter: Init. error User chart: File read error Dual axis log (BT) error Gyro error (Trackpilot) Sensor adapter 4 COM timeout Gyro 3 COM error Datum change In Chart Display License is not available or has expired. Cancelled chart. License is valid - up-to-date status doubtful. License is not available or has expired. License is not available or has expired Cancelled chart. In Chart Catalogue In Basic Setting In Chart Catalogue No where - it is set up automatically In Chart Catalogue I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display on the GPS. I can send a copy of my Route Plan to an AIS target as a Safety Message. I can set the ECDIS to include engine log information into the Voyage log automatically.

Страница 15

Лист1 I can create a User Chart from the Voyage Log and save it to a USB memory device. I can reset the Chart Usage Log after creating a backup copy. I can connect the ECDIS to the Internet and upload all documentation to an external storage. I can view and print a copy of the Chart Usage Log. I can send my Route Plan and User Chart to a FURUNO RADAR for display on the RADAR. Yes but I must select the same Safety Contour for both route plans. When I have to update the software of the ECDIS. Deep Contour The Chart Viewing Dates The Radar overlay Yes but only to an ECDIS with the exact same software version number. Configure and enable the Check Area function to assist me in scanning the ENCs for danger to navigation and hazardous objects. License is not available or has expired. Cancelled chart. License is valid - up-to-date status doubtful. License is not available or has expired. License is not available or has expired Cancelled chart. I select RNC in the Chart Catalogue. I select Vector chart in the Chart Catalogue. I right click on the object.

Страница 16

Лист1 I select [Record][Event Log] and [User Event] from the Instant Access bar and insert the observation in the Record User Event window. I show a playback of my past voyage track on the charts. By using the record position event function of the Event Log. I set the View Until date for the Manual Update two months back in time. I use the List tab of Manual Update tool function. I deselect the option from the Symbol Display dialogue. I import the information using the Chart Details function in the Chart Catalogue. I import the information using the Chart Details function in the Chart Catalogue. By left clicking on the chart area. I left click on Route in the Quick Access Bar and then I select Monitor. I left click on User Chart in the Status Bar and then I select Plan. I left click on User Chart in the Information sidebar - then I select Plan. I use the Chart Edit function. I use the Chart Edit function. I use the Chart Edit function. I click New in the Route Planning tool. I click on Route in the Quick Access bar. The Kalman filter is switched on when steering is switched to Autopilot. Red ENC symbols Ship's minimum speed Safety depth Ship's maximum speed

Страница 17

Лист1 Yes in the route planning tool. On all types of charts in the ECDIS No Safety Contour setting Safety Contour setting Safety Contour setting T&&P Notice License number Deep Contour Update issue date I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display on the GPS. I can send a copy of my Route Plan to an AIS target as a Safety Message. I can set the ECDIS to include engine log information into the Voyage log automatically. I can create a User Chart from the Voyage Log and save it to a USB memory device. I can reset the Chart Usage Log after creating a backup copy. I can connect the ECDIS to the Internet and upload all documentation to an external storage. I can view and print a copy of the Chart Usage Log. GPS Log RADAR Log Details Log Red ENC symbols Only the Manual Updates Soundings (from the Chart Display dialogue) By left clicking on the chart area. Detailed report Detailed report

Страница 18

Лист1 Detailed report Area Report Detailed report Detailed report There is no special indication in the Own Ship Functions Box. There is no way I can see if a chart object is created using Manual Updates. By clicking on "Route" and then on "Route Info" in the Quick Access Bar when in Navi mode. I cannot get information on the route which is being monitored. I cannot get information on the route which is being monitored. The Trip Counter can be reset by deleting it using the Backup and Restore dialogue. I can reset the odometer from the Quick Access sidebar. In the Chart Display menu. In the Chart Display menu In the Update function of the Chart Legend In the Update function of the Chart Legend In the User Chart Only on raster charts In the route planning tool. In the route planning tool. No Yes if I select Copy from monitor in the Route plan menu and edit the copy. When copying is completed I select-Exchange with monitor in the Route Plan menu. No - but I can transfer them to another manufacturer's type of ECDIS. A Manual update is a chart created using the digitizer function of the FURUNO ECDIS.

Страница 19

Лист1 #1:Permit #2:Base CDs #3:Update CD Non HO Chart A point is used to connect the User Chart with a route plan. The Kalman Filter is a filter which continuously monitors the connection to the RADAR GPS and AIS. 999min. + 999NM + 999km + 999m The filter is used to verify the quality of data on the Base and Update CDs. In Chart Legend In the About dialogue In the S52 Presentation library In the S52 Presentation library In the S52 Presentation library In Chart Catalogue In the Status Bar In the Status Bar In the Status Bar In the Status Bar In the Status Bar In the Status Bar In Chart Catalogue In Chart Catalogue In Chart Catalogue In own ship functions box

I cannot update T&&Ps on the FURUNO ECDIS.

Страница 20

Лист1 I load the new Permit file using the file named ENC.PMT and then I use the S52 Presentation Library from the System menu in the Chart Menu to convert the ENCs into SENCs.

Страница 21