36 1 901KB
RAPPORT D'EXAMEN PAR MAGNETOSCOPIE MAGNETIC PARTICLE EXAMINATION REPORT
Référence du Projet/Project Reference : IE0164
Date :
Report N°: IE 0164/MT/115
12/20/2016
Lieu / Location : SFAX Client : Objet/Object :
Maitre d'œuvre/ Owner : WDI Documents de Référence/ Reference DOC : Procédure / Procedure N°: Code de référence/ Reference Code : Critère d'accept./Acceptance Criteria : Contrôle Visuel/Visuel examination :
INAP MPI of Padeyes before and after Load Test
NA QP/NDT-MT/01 Rev 00 EN 1290 EN 1291 Level 1 Conform
Vigil Camp - Master Skid Description : Identification : 814-214 Matière/Material : Epaisseur/ S235 JR X thikness : NA Examen / Examination: Avant TT/Before PWHT Après TT/After PWHT Traitement Thermique(TT) NA / PWHT NA Etendue de l'examen/Extent of Examination: 100% Spots Consommable / Consumable Conditions d'examen/ Exam Condition Brute : Visible : Température/ Temperature (°C) : 18 Brossée/ Brushed : Fluorésent/ Fluorescent : Humidité/ Humidity (%) : 75 Sablée/ Sandblasted : Type du fond blanc/ Background type :B104 A Eclairage / Lighting: Naturel / Natural Attaque chimique/ Type de révélateur Mag./ B103 C Artificiel/ Artificial Type : NA Chemical attack : Magnetic developer type : Valeur en luxe / Luxury Value : > 1000 Equipements: Electro-aiment/ Electro magnet Aiment permanant / permanent magnet N° de série/Serial number: 16823 Tension/ Current : 220 V Date Étalonnage/Calibration Date : 28/03/2016 Zone de réparation / Identification / Identification Conformité/Conformity Défauts/Defects
Caniveaux/ Undercut
Piqure/ Hole
Weld N°
Soufflure/ Porosity
Fissure / Crack
NA
Corrosion /exessif
Epaisseur / Thickness (mm)
NA
NC :non conforme/ Not Conform
Diamètre/ Diameter (Inch)
W08
C : conforme / Conform
N° Soudeur/
Padeyes Welds
Welder N°
Soudure N° /
Repair Area
C: NC : C: NC: C: NC : C: NC : C: NC : C: NC : Schéma / Sketch:
No repair zone
No available sketch
Observation All padeyes welds were MPI inspected before and after load test and all area was found to be free of surface defects at the time of inspection. In accordance with BS7072 Regulations validity of this certificate is 12 months from last inspection. L'Inspecteur CND PIC/ PIC NDT Inspector Date : Nom/ Name : Certifié / Certified :
12/20/2016 Naim Arfa ASNT MT II
Vérifié par/ Checked by Date : 12/20/2016 Nom/ Name : Brahim Drira Fonction/ Function : Technical Manager
Client Date : Nom/ Name :
Visa :
Visa :
"NB: Ce document est la prorieté de la societé PIC
Visa : ELAin Road Km 4- RAWDHAN building 4 th Floor 3052 Sfax-Tunisia Phone: +216 74 618 677/ Fax : +216 74 610 644 il est interdit de communiquer dans des tierces parties sans autorisation ecrite " E-mail: [email protected]
LOAD TEST REPORT Référence du Projet/Project Reference : IE0164 Client:
INAP
Date:
Maître d'œuvre/Owner:
WDI
12/20/2016
Lieu/Location : INAP WORKSHOP
REPORT N° : 137/B3/17
REFERENCES CLIENT / CUSTOMER REFERENCES Nom de la Sté / Company name :
INAP
Adresse / Address:
GABES ROAD 9,5 KM 3003 SFAX
Lieu de la visite / Place of visit :
INAP WORKSHOP IDENTIFICATION
Description :
Vigil Camp - Master Skid
Serial N°:
814-214
Size:
Capacity:
Proof Load Test
Length:
12,00 m
Tare Weight:
3500 Kg
Width:
03,00 m
Safe Working Load:
12900 Kg
Height:
0,400 m
Grosse Weight:
16400 Kg
Number of examinated lifting points:
Tested With 1 x Grosse Weight
ACCEPTANCE :
4
Conform
Not Conform
SCHEMA/ SKETCH
New data plate fitted on this equipement
Date of Inspection:
12/20/2016
Suitable for Service
Yes
Date of Next Inspection19/12/2017 : Code Couleur / Color Code:
NA
STANDARDS This report complies with: The provision and use of work equipement regulations 1998 The supply of machinery (Safety) regulations 1992 BS EN 12079:2006 offshore containers and associated lifting sets
CONCLUSION A visual examination for general condition and a mangnetic particle inspection was carried out on the lifting point welds of the above mentioned itemt. See attached MPI Report N°: IE 0164/MT/115 No cracks or defects indication were noted at the time of inspection. The undersigned, PIC Inspector, here by certify that the here above mentioned item was thoroughly examined, and the above particulars are correct. It's to further certify that this lifting equipement complies in all respect with the oppropriate provisions and is free from defects affecting safety. In the case of any modification of the equipement which has not been agreed upon with us in writing, this becomes invalid. Examination of lifting equipement only-this does not include accessories or vehicle on which it is mounted. L'Inspecteur PIC/ PIC Inspector
Vérifié par/ Checked by
Client
Date :
12/20/2016
Date :
12/20/2016
Date :
Nom/ Name :
Naim Arfa
Nom/ Name :
Brahim Drira
Nom/ Name :
Certifié/ Certified :
Lifting Inspector
Fonction/ Function :
Technical Manager
Visa :
Visa :
Visa :
LOAD TEST REPORT Référence du Projet/Project Reference : IE0164 Client:
INAP
Date:
Maître d'œuvre/Owner:
WDI
12/20/2016
Lieu/Location : INAP WORKSHOP
REPORT N° : 137/B3/17
REFERENCES CLIENT / CUSTOMER REFERENCES Nom de la Sté / Company name :
INAP
Adresse / Address:
GABES ROAD 9,5 KM 3003 SFAX
Lieu de la visite / Place of visit :
INAP WORKSHOP IDENTIFICATION
Description :
Vigil Camp - Master Skid
Serial N°:
814-214
Size:
Capacity:
Proof Load Test
Length:
12,00 m
Tare Weight:
3500 Kg
Width:
03,00 m
Safe Working Load:
12900 Kg
Height:
0,400 m
Grosse Weight:
16400 Kg
Number of examinated lifting points:
4
Tested With 1 x Grosse Weight
ACCEPTANCE :
Conform
Not Conform
SCHEMA/ SKETCH
New data plate fitted on this equipement
Date of Inspection:
12/20/2016
Suitable for Service
Yes
Date of Next Inspection19/12/2017 : Code Couleur / Color Code:
NA
STANDARDS This report complies with: The provision and use of work equipement regulations 1998 The supply of machinery (Safety) regulations 1992 BS EN 12079:2006 offshore containers and associated lifting sets
CONCLUSION A visual examination for general condition and a mangnetic particle inspection was carried out on the lifting point welds of the above mentioned itemt. See attached MPI Report N°: IE 0164/MT/115 No cracks or defects indication were noted at the time of inspection. The undersigned, PIC Inspector, here by certify that the here above mentioned item was thoroughly examined, and the above particulars are correct. It's to further certify that this lifting equipement complies in all respect with the oppropriate provisions and is free from defects affecting safety. In the case of any modification of the equipement which has not been agreed upon with us in writing, this becomes invalid. Examination of lifting equipement only-this does not include accessories or vehicle on which it is mounted.
"NB:
ELAin Road Km 4- RAWDHAN building 4 th Floor 3052 Sfax-Tunisia Phone: +216 74 610 780/ Fax : +216 74 618 677 Ce document est la prorieté de la societé PIC ilE-mail: est interdit de communiquer dans des tierces parties sans autorisation ecrite " [email protected]
RAPPORT D'EXAMEN PAR RESSUAGE DYE PENETRANT EXAMINATION REPORT
Référence du Projet/Project Reference: IE0164
Date : 20/12/2016
Client : Objet/Object :
INAP Penetrant examination of Welds
Maitre d'œuvre/owner:
Description :
Vigil Camp - Master Skid
Identification : 814-214
Avant TT/Before PWHT
Après TT/After PWHT
100% Visible : Fluorésent/Fluorescent : Type de penetrant/Type penetrant : Type de révélateur/Type of developer: Type de solvant/Type of solvent :
10%
NA
C:
NC :
C:
NC :
C:
NC :
C:
NC :
C:
NC :
C:
NC :
Undercut
Morsure
Piqure/ Hole
Porosity
Thickness (mm)
Epaisseur
NA
Repair Area
Schéma / Sketch:
Inspected area
L'Inspecteur CND PIC/ PIC NDT Inspector
>1000
Zone de réparation
Défauts/Defects Fissure / Crack
Conformité/Conformity Diametre (inch)
Welder N°
N° Soudeur
DP 55 D100 Eau
33°C 44 %
C : Conforme/ Conform - NC : Non Conforme/ Not conform
Identification
W04+W08
Conditions d'examen Temperature (°C) : Humidité/Humidity (%) : Eclairage/Lighting: Naturel Artificiel Valeur en luxe :
Soufflure/
Dans les colonnes noter les indications suivantes :
10 % OF ALL WELDS
:
Consommable / Consumable
condition:
Brute : Brossée/Brushet : Sablée /sandblasted: Attaque chimique/chemical attack :
Identification /
NA QP/NDT-PT/01 Rev 00 EN 571-1 EN 1289 Level 1 Conform
Spots :
Corrosion exessif
Etat de surface /Surface
: : : :
Caniveau/
Etendue de l'examen/Extent of Examination:
NA
Documents de Référence Procédure / Procedure N° Code de référence/Reference Code Critère d'accept./Acceptance Criteria Contrôle Visuel/Visuel examination
Morsure/
Matière/Material: S 235 JR Epaisseur/thikness : Examen / Examination : Traitement Thermique(TT) NA / PWHT NA
Rapport N° : IE0164/PT/037 Report N°
WDI
Vérifié par/ Checked by
Date : Nom/ Name :
12/20/2016 Naim Arfa
Date : 12/20/2016 Nom/Name : Brahim Drira
Certifié/ Certified :
ASNT PT II
Fonction :
Technical Manager
Client Date : Nom/ Name :
Visa
Visa :
Visa :
ELAin Road Km 4- RAWDHAN building 4 th Floor 3052 Sfax-Tunisia Phone: +216 74 618 677/ Fax : +216 74 610 644 "NB: Ce document est la prorieté de la societé PIC il est interdit de communiquer dans des tierces parties sans autorisation ecrite " E-mail: [email protected]