24 140 2MB
Mounting Description Micro ERS tilt bracket
__________________________________________________________________________________
Package content SXK 109 2165/1 (MAFI 1241)
Page 1(5)
221 06 SXK 109 2165/1 Uen rev B © Ericsson AB 2019
Mounting Description Micro ERS tilt bracket
__________________________________________________________________________________
Pole mounting procedure 1
2
Do not tighten
3
4
Tighten sufficiently
Do not tighten
5
6
26Nm
Page 2(5)
221 06 SXK 109 2165/1 Uen rev B © Ericsson AB 2019
Mounting Description Micro ERS tilt bracket
__________________________________________________________________________________
7
Attach ERS unit according to the unit specification.
8
Adjust azimuth tilt
9
52Nm
10
Adjust vertical tilt
11
52Nm
Page 3(5)
221 06 SXK 109 2165/1 Uen rev B © Ericsson AB 2019
Mounting Description Micro ERS tilt bracket
__________________________________________________________________________________
Wall mounting procedure 1
cc130mm
3
2
4
Attach ERS unit according to the unit specification.
!
5
Adjust azimuth tilt
6
52Nm
Page 4(5)
221 06 SXK 109 2165/1 Uen rev B © Ericsson AB 2019
Mounting Description Micro ERS tilt bracket
__________________________________________________________________________________
7
Adjust vertical tilt
8 52Nm
Steel band mounting procedure Same as pole mounting procedure, except that the steel banding plate (Item 5) should be used between the clamp and mounting steel band according to the picture below.
!
Follow local building regulations and instructions and ensure use of approved fasteners. MAFI AB, the product manufacturer, does not warrant other than the product during mounting onto wall or other similar assemblies.
Page 5(5)
221 06 SXK 109 2165/1 Uen rev B © Ericsson AB 2019